Covalent and Noncovalent Approaches to Rigid Coplanar π-Conjugated Molecules and Macromolecules

Non-covalent planarizing interactions yield highly ordered and thermotropic liquid crystalline conjugated polymers

Controlling the multi-level assembly and morphological properties of conjugated polymers through structural manipulation has contributed significantly to the advancement of organic electronics. In this work, a redox active conjugated polymer, TPT-TT, composed of alternating 1,4-(2-thienyl)-2,5-dialkoxyphenylene (TPT) and thienothiophene (TT) units is reported with non-covalent intramolecular S⋯O and S⋯H-C interactions that induce controlled main-chain planarity and solid-state order. As confirmed by density functional theory (DFT) calculations, these intramolecular interactions influence the main chain conformation, promoting backbone planarization, while still allowing dihedral rotations at higher kinetic energies (higher temperature), and give rise to temperature-dependent aggregation properties. Thermotropic liquid crystalline (LC) behavior is confirmed by cross-polarized optical microscopy (CPOM) and closely correlated with multiple thermal transitions observed by differential scanning calorimetry (DSC). This LC behavior allows us to develop and utilize a thermal annealing treatment that results in thin films with notable long-range order, as shown by grazing-incidence X-ray diffraction (GIXD). Specifically, we identified a first LC phase, ranging from 218 °C to 107 °C, as a nematic phase featuring preferential face-on π-π stacking and edge-on lamellar stacking exhibiting a large extent of disorder and broad orientation distribution. A second LC phase is observed from 107 °C to 48 °C, as a smectic A phase featuring sharp, highly ordered out-of-plane lamellar stacking features and sharp tilted backbone stacking peaks, while the structure of a third LC phase with a transition at 48 °C remains unclear, but resembles that of the solid state at ambient temperature. Furthermore, the significance of thermal annealing is evident in the ∼3-fold enhancement of the electrical conductivity of ferric tosylate-doped annealed films reaching 55 S cm-1. More importantly, thermally annealed TPT-TT films exhibit both a narrow distribution of charge-carrier mobilities (1.4 ± 0.1) × 10-2 cm2 V-1 s-1 along with a remarkable device yield of 100% in an organic field-effect transistor (OFET) configuration. This molecular design approach to obtain highly ordered conjugated polymers in the solid state affords a deeper understanding of how intramolecular interactions and repeat-unit symmetry impact liquid crystallinity, solution aggregation, solution to solid-state transformation, solid-state morphology, and ultimately device applications.

Tuning Molecular Motion Enhances Intrinsic Fluorescence in Peptide Amphiphile Nanofibers

Peptide amphiphiles (PAs) are highly tunable molecules that were recently found to exhibit aggregation-induced emission (AIE) when they self-assemble into nanofibers. Here, we leverage decades of molecular design and self-assembly study of PAs to strategically tune their molecular motion within nanofibers to enhance AIE, making them a highly useful platform for applications such as sensing, bioimaging, or materials property characterization. Since AIE increases when aggregated molecules are rigidly and closely packed, we altered the four most closely packed amino acids nearest to the hydrophobic core by varying the order and composition of glycine, alanine, and valine pairs. Of the six PA designs studied, C16VVAAK2 had the highest quantum yield at 0.17, which is a more than 10-fold increase from other PA designs including the very similar C16AAVVK2, highlighting the importance of precise amino acid placement to anchor rigidity closest to the core. We also altered temperature to increase AIE. C16VVAAK2 exhibited an additional 4-fold increase in maximum fluorescence intensity when the temperature was raised from 5 to 65 °C. As the temperature increased, the secondary structure transitioned from β-sheet to random coil, indicating that further packing an already aligned molecular system makes it even more readily able to transfer energy between the electron-rich amides. This work both unveils a highly fluorescent AIE PA system design and sheds insights into the molecular orientation and packing design traits that can significantly enhance AIE in self-assembling systems.

Coplanar Conformational Structure of π-Conjugated Polymers for Optoelectronic Applications

Hierarchical structure of conjugated polymers is critical to dominating their optoelectronic properties and applications. Compared to nonplanar conformational segments, coplanar conformational segments of conjugated polymers (CPs) demonstrate favorable properties for applications as a semiconductor. Herein, recent developments in the coplanar conformational structure of CPs for optoelectronic devices are summarized. First, this review comprehensively summarizes the unique properties of planar conformational structures. Second, the characteristics of the coplanar conformation in terms of optoelectrical properties and other polymer physics characteristics are emphasized. Five primary characterization methods for investigating the complanate backbone structures are illustrated, providing a systematical toolbox for studying this specific conformation. Third, internal and external conditions for inducing the coplanar conformational structure are presented, offering guidelines for designing this conformation. Fourth, the optoelectronic applications of this segment, such as light-emitting diodes, solar cells, and field-effect transistors, are briefly summarized. Finally, a conclusion and outlook for the coplanar conformational segment regarding molecular design and applications are provided.

Memory Effect by Melt Crystallization Observed in Polymorphs of a Benzothieno-Benzothiophene Derivative

This work provides a comprehensive illustration of a crystalline melt memory effect recorded for three solvates of the 2,7-bis(2-(2-methoxyethoxy)ethoxy)benzo[b]benzo[4,5] thieno[2,3-d]thiophene (OEG-BTBT) molecule with dichloromethane (DCM) molecules. Combined optical microscopy and X-ray diffraction measurements at different temperatures are used to get an overview of the structural and morphological properties like melting points, isotropic transition temperatures, induction times, and crystallization kinetics of the three forms. An outstanding observation is made upon annealing the three polymorphs at temperatures well above their respective melting points as well as above the optical clearance temperature. After cooling back to room temperature, recrystallization results in the formation of the initial phase present before the annealing process. This melt memory effect is observed for all three solvates. These observations can be correlated to the strong interaction between the DCM molecules and the oligoethylene glycol side chains, even in the molten state. This conclusion rationalizes the experimental observation made upon solvent vapor annealing of the crystalline sample with DCM, which unambiguously transformed the system into a disordered state.

An Efficient Direct Arylation Polycondensation via C-S Bond Cleavage

The direct arylation polycondensation (DArP) has become one of the most important methods to construct conjugated polymers (CPs). However, the homocoupling side-reactions of aryl halides and the low regioseletive reactivities of unfunctionalized aryls hinder the development of DArP. Here, an efficient Pd and Cu co-catalyzed DArP was developed via inert C-S bond cleavage of aryl thioethers, of which robustness was exemplified by over twenty conjugated polymers (CPs), including copolymers, homopolymers, and random polymers. The capture of oxidative addition intermediate together with experimental and theoretic results suggested the important role of palladium (Pd) and copper (Cu) co-catalysis with a bicyclic mechanism. The studies of NMR, molecular weights, trap densities, two-dimensional grazing-incidence wide-angle X-ray scattering (2D-GIWAXS), and the charge transport mobilities revealed that the homocoupling reactions were significantly suppressed with high regioselectivity of unfunctionalized aryls, suggesting this method is an excellent choice for synthesizing high performance CPs.

Synthesis and exceptional operational durability of polyaniline-inspired conductive ladder polymers

Ladder-type structures can impart exceptional stability to polymeric electronic materials. This article introduces a new class of conductive polymers featuring a fully ladder-type backbone. A judicious molecular design strategy enables the synthesis of a low-defect ladder polymer, which can be efficiently oxidized and acid-doped to achieve its conductive state. The structural elucidation of this polymer and the characterization of its open-shell nature are facilitated with the assistance of studies on small molecular models. An autonomous robotic system is used to optimize the conductivity of the polymer thin film, achieving over 7 mS cm-1. Impressively, this polymer demonstrates unparalleled stability in strong acid and under harsh UV-irradiation, significantly surpassing commercial benchmarks like PEDOT:PSS and polyaniline. Moreover, it displays superior durability across numerous redox cycles as the active material in an electrochromic device and as the pseudocapacitive material in a supercapacitor device. This work provides structural design guidance for durable conductive polymers for long-term device operation.

Tandem Suzuki Polymerization/Heck Cyclization Reaction to Form Ladder-Type 9,9'-Bifluorenylidene-Based Conjugated Polymer

The synthesis of ladder-type 9,9'-bifluorenylidene-based conjugated polymer is reported. Unlike the typical synthetic strategy, the new designed ladder-type conjugated polymer is achieved via tandem Suzuki polymerization/Heck cyclization reaction in one-pot. In the preparation process, Suzuki polymerization reaction occurred first and then the intramolecular Heck cyclization followed smoothly under the same catalyst Pd(PPh3)4. The model reaction proved that the introduction of iodine (I) for this tandem reaction can effectively control the sequential bond-forming process and inhibit the additional competitive side reactions. Thus, small-molecule model compounds could be obtained in high yields. The successes of the synthesized small molecule and polymer compounds indicate that the Pd-catalyzed tandem reaction may be an effective strategy for improving extended π-conjugated materials.

Removal of highly concentrated methylene blue dye by cellulose nanofiber biocomposites

The contamination of water by dyes in high concentrations is a worldwide concern, and it has prompted the development of efficient, economical, and environmentally friendly materials and technologies for water purification. The hydration and adsorption capacity for methylene blue (MB) in biocomposites (BCs) based on cellulose nanofiber (CNF) (0 to 2 wt%) were studied. BCs were synthesized through a simple and straightforward route and characterized by spectroscopy, microscopic techniques and thermogravimetric analysis, among others. Hydration studies showed that BCs prepared with 2 wt% of CNF can absorb large volumes of water, approximately 2274 % in the case of poly 2-acrylamide-2-methyl-1-propanesulfonic acid (PAMPS)-CNF and 2408 % in poly sodium 4-styrene sulfonate (PSSNa)-CNF. These BCs showed outstanding adsorption capacity for highly concentrated MB solutions (4536 mg g^-1 PAMPS-CNF and 11,930 mg g^-1 PSSNa-CNF). It was confirmed that the adsorption mechanism is through electrostatic interactions. Finally, BCs showed high MB adsorption efficiency after several sorption-desorption cycles and on a simulated textile effluent. Furthermore, the theoretical results showed a preferential interaction between MB and the semiflexible polymer chains at the lowest energy setting. The development and study of a new adsorbent material with high MB removal performance that is easy to prepare, economical and reusable for potential use in water purification treatments was successfully achieved.

Backbone coplanarity manipulation via hydrogen bonding to boost the n-type performance of polymeric mixed conductors operating in aqueous electrolyte

The development of high-performance n-type semiconducting polymers remains a significant challenge. Reported here is the construction of a coplanar backbone via intramolecular hydrogen bonds to dramatically enhance the performance of n-type polymeric mixed conductors operating in aqueous electrolyte. Specifically, glycolated naphthalene tetracarboxylicdiimide (gNDI) couples with vinylene and thiophene to give gNDI-V and gNDI-T, respectively. The hydrogen bonding functionalities are fused to the backbone to ensure a more coplanar backbone and much tighter π-π stacking of gNDI-V than gNDI-T, which is evidenced by density functional theory simulations and grazing-incidence wide-angle X-ray scattering. Importantly, these copolymers are fabricated as the active layer of the aqueous-based electrochromic devices and organic electrochemical transistors (OECTs). gNDI-V exhibits a larger electrochromic contrast (ΔT = 30%) and a higher coloration efficiency (1988 cm² C^-1) than gNDI-T owing to its more efficient ionic-electronic coupling. Moreover, gNDI-V gives the highest electron mobility (0.014 cm² V^-1 s^-1) and μC* (2.31 FV^-1 cm^-1 s^-1) reported to date for NDI-based copolymers in OECTs, attributed to the improved thin-film crystallinity and molecular packing promoted by hydrogen bonds. Overall, this work marks a remarkable advance in the n-type polymeric mixed conductors and the hydrogen bond functionalization strategy opens up an avenue to access desirable performance metrics for aqueous-based electrochemical devices.

Novel Organic Cathode with Conjugated N-Heteroaromatic Structures for High-Performance Aqueous Zinc-Ion Batteries

Aqueous zinc-ion batteries (AZIBs) are being considered new choices of batteries not only because of their inherent safety but also because of their low price advantage. Nevertheless, it is still an important task to develop organic cathode materials with green sustainability and high performance. Hexaazatriphenylene (HAT)-based organic materials have shown great potential for use in AZIBs. Herein, 5,6,11,12,17,18-hexaazatrinaphthylene-2,8,14-tricarboxylic acid (HATTA) is designed and prepared as the AZIB cathode. Benefiting from the conjugative effect of -COOH, extended π-conjugated structure, and abundant active sites, the HATTA electrode exhibits a high capacity (225.8 mA h g^-1 at 0.05 A g^-1), an outstanding rate performance (136.1 mA h g^-1 at 25 A g^-1), and a long-term cycling lifespan (84.07% of the initial capacity after 10,000 cycles at 25 A g^-1). Meanwhile, the characterization results of ex situ spectroscopic tests prove that the unsaturated bond (C═N) is the redox-active moiety of HATTA. In addition, the flexible Zn//HATTA battery also exhibits impressive long-term cycling stability and good flexibility, showing its promising application in wearable electronics. This work provides a strategy with rational designing for constructing high-performance AZIBs with organics.

Precise Synthesis of Concentric Ring, Helicoid, and Ladder Metallo-Polymers with Chevron-Shaped Monomers

Molecular geometry represents one of the most important structural features and governs physical properties and functions of materials. Nature creates a wide array of substances with distinct geometries but similar chemical composition with superior efficiency and precision. However, it remains a formidable challenge to construct abiological macromolecules with various geometries based on identical repeating units, owing to the lack of corresponding synthetic approaches for precisely manipulating the connectivity between monomers and feasible techniques for characterizing macromolecules at the single-molecule level. Herein, we design and synthesize a series of tetratopic monomers with chevron stripe shape which serve as the key precursors to produce four distinct types of metallo-macromolecules with well-defined geometries, viz., the concentric hexagon, helicoid polymer, ladder polymer, and cross-linked polymer, via platinum-acetylide couplings. Concentric hexagon, helicoid, and ladder metallo-polymers are directly visualized by transmission electron microscopy, atomic force microscopy, and ultra-high-vacuum low-temperature scanning tunneling microscopy at the single-molecule level. Finally, single-walled carbon nanotubes (SWCNTs) are selected as the guest to investigate the structure-property relationship based on such macromolecules, among which the helicoid metallo-polymer shows high efficiency in wrapping SWCNTs with geometry-dependent selectivity.

Synthesis of Ladder-Type 9,9'-Bifluorenylidene-Based Conjugated Oligomers via a Pd-Catalyzed Tandem Suzuki Coupling/Heck Cyclization Approach

For new ladder-type oligomers and polymers with versatile and robust synthetic strategies, in this study, four fully conjugated ladder-type overcrowded 9,9'-bifluorenylidene-based compounds and oligomers (BFY1, BFY2, BFY3, and BFY4) were synthesized via a Pd-catalyzed tandem Suzuki coupling/Heck cyclization reaction. By monomer screening and route optimization, the target products were obtained in high yields and characterized by ¹H and ¹³C NMR spectroscopy and high resolution mass spectroscopy.

High mobility and ON/OFF ratio of solution-processable p-channel OFETs from arylacetylene end-capped alkoxyphenanthrenes

New arylacetylene end-capped alkoxyphenanthrenes were synthesized and demonstrated as the best active layer for solution-processable p -channel organic field-effect transistors. The alkoxy chain embedded compounds exhibited enhanced solubility and induced non-covalent interactions resulting in effective molecular packing. The 'Lewis soft' heteroatoms direct the most stable conformation with dihedral angles possible for molecular interactions, and energy levels. DFT studies supported the finetuning of FMOs, with high HOMO levels ~-5.2 eV ensuring a low barrier for charge injection. OFET devices exhibited a maximum charge carrier mobility up to 1.30 cm 2 /Vs with the highest ON/OFF ratio of 10 7 . The strong π-π interactions and the crystallinity of the films are well supported by GIXRD and SEM analysis.

Recent Structural Engineering of Polymer Semiconductors Incorporating Hydrogen Bonds

Highly planar, extended π-electron organic conjugated polymers have been increasingly attractive for achieving high-mobility organic semiconductors. In addition to the conventional strategy to construct rigid backbone by covalent bonds, hydrogen bond has been employed extensively to increase the planarity and rigidity of polymer via intramolecular noncovalent interactions. This review provides a general summary of high-mobility semiconducting polymers incorporating hydrogen bonds in field-effect transistors over recent years. The structural engineering of the hydrogen bond-containing building blocks and the discussion of theoretical simulation, microstructural characterization, and device performance are covered. Additionally, the effects of the introduction of hydrogen bond on self-healing, stretchability, chemical sensitivity, and mechanical properties are also discussed. The review aims to help and inspire design of new high-mobility conjugated polymers with superiority of mechanical flexibility by incorporation of hydrogen bond for the application in flexible electronics.

State-of-the-Art, Opportunities, and Challenges in Bottom-up Synthesis of Polymers with High Thermal Conductivity

In contrast to metals, polymers are predominantly thermal and electrical insulators. With their unparalleled advantages such as light weight, turning polymer insulators into heat conductors with metal-like thermal conductivity is...

Unfused Nonfullerene Acceptors Based on Simple Dipolar Merocyanines

Merocyanine (MC) dyes exhibit facile synthesis and attractive optical properties, making them widely studied as the donor materials in organic solar cells (OSCs). In this study, for the first time, simple indole-based MCs are successfully designed as unfused nonfullerene acceptors (NFAs) for OSCs by forming dimers with A-D-π-D-A structure, which possess enhanced photostability compared to the well-known ITIC acceptor and high electron mobility in blend films. When blended with P3HT donor, one of the dimers, i. e. Z2, shows a good cell efficiency of 3.53 %, which outperforms the performance of most of P3HT/NFA blends, particularly for unfused systems, and thus indicates good potential of simple MCs as NFAs.

Excited-state engineering of oligothiophenes via phosphorus chemistry towards strong fluorescent materials

Due to efficient intersystem crossing (ISC), combined with efficient non-radiative processes of the triplet excited state, oligothiophenes generally exhibit very weak photoluminescence. Phosphorus (P)-bridged terthiophenes (P-terThs) and phosphorus (P)-bridged bithiophenes (P-biThs) were synthesized. The diverse and well-defined P-chemistry has been applied to fine tune the photophysical properties of these materials. The asymmetric electronic coupling between the P-center and terThs suppressed the electronic interactions of two terTh and biTh moieties in the ground state S₀. Particularly, P-terThs and P-biThs having a positively charged P(+)-center induce pronounced asymmetric electronic environments on the two terThs and two biThs, respectively, which allows relaxation from the initial excited state via symmetry breaking charge transfer (SBCT) to give the charge separated state S_SBCT. P-terThs and P-biThs having a positively charged P(+)-center exhibit stronger SBCT than others, which may result in a weaker ISC of oligothiophenes, and consequently lead to the photoluminescence quantum yields (PLQYs) being as high as 71% and 39%, respectively. The current study uncovered detailed insights on the effects of phosphorus chemistry on the SBCT of oligothiophenes and their resulting effects on the photophysical properties of P-bridged oligothiophenes, which have not been previously addressed in oligothiophenes.

Steric Hindrance Drives the Boron-Initiated Polymerization of Dienyltriphenylarsonium Ylides to Photoluminescent C5-Polymers

A series of alkyl-subsituted dienyltriphenylarsonium ylides were synthesized and used as monomers in borane-initiated polymerization to obtain practically pure C5-polymers (main-chain grows by five carbon atoms at a time). The impact of triethylborane (Et3 B), tributylborane (Bu3 B), tri-sec-butylborane (s-Bu3 B), and triphenylborane (Ph3 B) initiators on C5 polymerization was studied. Based on NMR and SEC results, we have shown that all synthesized polymers have C5 units with a unique unsaturated backbone where two conjugated double bonds are separated by one methylene. The synthesized C5-polymers possess predictable molecular weights and narrow molecular weight distributions (Mn,NMR =2.8 -11.9 kg mol-1 , Ð=1.04-1.24). It has been found that increasing the steric hindrance of both the monomer and the initiator can facilitate the formation of more C5 repeating units, thus driving the polymerization to almost pure C5-polymer (up to 95.8 %). The polymerization mechanism was studied by 11 B NMR and confirmed by DFT calculations. The synthesized C5-polymers are amorphous with tunable glass-transition temperatures by adjusting the substituents of monomers, ranging from +30.1 °C to -38.4 °C. Furthermore, they possess blue photoluminescence that changes to yellow illuminating the polymers for 5 days with UV radiation of 365 nm (IIE, isomerization induced emission).

Ladder Phenylenes Synthesized on Au(111) Surface via Selective [2+2] Cycloaddition

Ladder phenylenes (LPs) composed of alternating fused benzene and cyclobutadiene rings have been synthesized in solution with a maximum length no longer than five units. Longer polymeric LPs have not been obtained so far because of their poor stability and insolubility. Here, we report the synthesis of linear LP chains on the Au(111) surface via dehalogenative [2+2] cycloaddition, in which the steric hindrance of the methyl groups in the 1,2,4,5-tetrabromo-3,6-dimethylbenzene precursor improves the chemoselectivity as well as the orientation orderliness. By combining scanning tunneling microscopy and noncontact atomic force microscopy, we determined the atomic structure and the electronic properties of the LP chains on the metallic substrate and NaCl/Au(111). The tunneling spectroscopy measurements revealed the charged state of chains on the NaCl layer, and this finding is supported by density functional theory calculations, which predict an indirect bandgap and antiferromagnetism in the polymeric LP chains.

High-Performance Ladder-Type Heteroheptacene-Based Nonfullerene Acceptors Enabled by Asymmetric Cores with Enhanced Noncovalent Intramolecular Interactions

Nonfullerene acceptors (MQ3, MQ5, MQ6) are synthesized using asymmetric and symmetric ladder-type heteroheptacene cores with selenophene heterocycles. Although MQ3 and MQ5 are constructed with the same number of selenophene heterocycles, the heteroheptacene core of MQ5 is end-capped with selenophene rings while that of MQ3 is flanked with thiophene rings. With the enhanced noncovalent interaction of O⋅⋅⋅Se compared to that of O⋅⋅⋅S, MQ5 shows a bathochromically shifted absorption band and greatly improved carrier transport, leading to a higher power conversion efficiency (PCE) of 15.64 % compared to MQ3, which shows a PCE of 13.51 %. Based on the asymmetric heteroheptacene core, MQ6 shows an improved carrier transport induced by the reduced π-π stacking distance, related with the increased dipole moment in comparison with the nonfullerene acceptors based on symmetric cores. MQ6 exhibits a PCE of 16.39 % with a V_OC of 0.88 V, a FF of 75.66 %, and a J_SC of 24.62 mA cm^-2 .

Enhanced Apoptosis by Functionalized Highly Reduced Graphene Oxide and Gold Nanocomposites in MCF-7 Breast Cancer Cells

Graphene nanocomposites have gained significant interest in a variety of biological applications due to their unique properties. Herein, we have studied the apoptosis-inducing ability and anticancer properties of functionalized highly reduced graphene oxide (HRG) and gold nanoparticles (Au NPs)-based nanocomposites (AP-HRG-Au). Samples were prepared under facile conditions via simple stirring and ultrasonication. All the samples were tested for their anticancer properties against different human cancer cell lines including lung (A549), liver (HepG2), and breast (MCF-7) cancer cells using doxorubicin as a positive control. In order to enhance the solubility and bioavailability of the sample, HRG was functionalized with 1-aminopyrene (1-AP) as a stabilizing ligand. The ligand also facilitated the homogeneous growth of Au NPs on the surface of HRG by offering chemically specific binding sites. The synthesis of nanocomposites and the surface functionalization of HRG were confirmed by UV-Vis, powder X-ray diffraction, and Fourier transform infrared spectroscopy. The structure and morphology of the as-prepared nanocomposites were established by high-resolution transmission electron microscopy. Because of the functionalization, the AP-HRG-Au nanocomposite exhibited enhanced physical stability and high dispersibility. A comparative anticancer study of pristine HRG, nonfunctionalized HRG-Au, and 1-AP-functionalized AP-HRG-Au nanocomposites revealed the enhanced apoptosis ability of functionalized nanocomposites compared to the nonfunctionalized sample, whereas the pristine HRG did not show any anticancer ability against all tested cell lines. Both HRG-Au and AP-HRG-Au have induced a concentration-dependent reduction in cell viability in all tested cell lines after 48 h of exposure, with a significantly higher response in MCF-7 cells compared to the remaining cells. Therefore, MCF-7 cells were selected to perform detailed investigations using apoptosis assay, cell cycle analysis, and reactive oxygen species measurements. These results suggest that AP-HRG-Au induces enhanced apoptosis in human breast cancer cells.

Synthesis of Single-Handed Helical Spiro-Conjugated Ladder Polymers through Quantitative and Chemoselective Cyclizations*

We report the unprecedented synthesis of one-handed helical spiro-conjugated ladder polymers with well-defined primary and secondary structures, in which the spiro-linked dibenzo[a,h]anthracene fluorophores are arranged in a one-handed twisting direction, through quantitative and chemoselective acid-promoted intramolecular cyclizations of random-coil precursor polymers composed of chiral 1,1'-spirobiindane and achiral bis[2-(4-alkoxyphenyl)ethynyl]phenylene units. Intense circular dichroism (CD) and circularly polarized luminescence (CPL) were observed, whereas the precursor polymers exhibited negligible CD and CPL activities. The introduction of 2,6-dimethyl substituents on the 4-alkoxyphenylethynyl pendants is of key importance for this simple, quantitative, and chemoselective cyclization. This strategy is applicable to the defect-free precise synthesis of other varieties of fully π-conjugated molecules and coplanar ladder polymers that have not been achieved before.

Electron-Deficient Polycyclic π-System Fused with Multiple B←N Coordinate Bonds

An extensive polycyclic π-system with 23 fused rings is synthesized via a highly efficient borylation reaction, in which four B-N covalent bonds and four B←N coordinate bonds are formed in one pot. B←N coordinate bonds not only lock the backbone into a near-coplanar conformation but also decrease the LUMO energy level to around -3.82 eV, demonstrating the dual utility of this strategy for the synthesis of extensive rigid polycyclic molecules and the development of n-type conjugated materials for organic electronics and organic photovoltaics.

Bis-acenaphthoquinone diimides with high electron deficiency and good coplanar conformation

A series of novel bis-acenaphthoquinone diimides featuring a highly electron-deficient bis-acenaphthoquinone core are facilely synthesized via Knoevenagel condensation reaction. The diimides show high electron deficiency and good coplanar conformation, together with one of them having a maximum electron mobility up to 0.038 cm2 V-1 s-1.

Systematic Study on the Morphological Development of Blade-Coated Conjugated Polymer Thin Films via In Situ Measurements

The morphology of conjugated polymer thin films, determined by the kinetics of film drying, is closely correlated with their electrical properties. Herein, we focused on dramatic changes in the thin-film morphology of blade-coated poly{[N,N'-bis(2-octyldodecyl)-naphthalene-1,4,5,8-bis(dicarboximide)-2,6-diyl]-alt-5,5'-(2,2'-bithiophene)} caused by the effect of solvent and coating temperature. Through in situ measurements, the evolution of polymer aggregates and crystallites, which plays a decisive role in the formation of the charge-transport pathway, was observed in real time. By combining in situ ultraviolet-visible spectroscopy and in situ grazing-incidence wide-angle X-ray scattering analysis, we could identify five distinct stages during the blade-coating process; these stages were observed irrespective of the solvent and coating temperature used. The five stages are described in detail with a proposed model of film formation. This insight is an important step in understanding the relationship between the morphology of thin polymer films and their charge-transport properties as well as in optimizing the structural evolution of thin films.

Extraordinary electrochemical stability and extended polaron delocalization of ladder-type polyaniline-analogous polymers

Electrochemical stability and delocalization of states critically impact the functions and practical applications of electronically active polymers. Incorporation of a ladder-type constitution into these polymers represents a promising strategy to enhance the aforementioned properties from a fundamental structural perspective. A series of ladder-type polyaniline-analogous polymers are designed as models to test this hypothesis and are synthesized through a facile and scalable route. Chemical and electrochemical interconversions between the fully oxidized pernigraniline state and the fully reduced leucoemeraldine state are both achieved in a highly reversible and robust manner. The protonated pernigraniline form of the ladder polymer exhibits unprecedented electrochemical stability under highly acidic and oxidative conditions, enabling the access of a near-infrared light-absorbing material with extended polaron delocalization in the solid-state. An electrochromic device composed of this ladder polymer shows distinct switching between UV- and near-infrared-absorbing states with a remarkable cyclability, meanwhile tolerating a wide operating window of 4 volts. Taken together, these results demonstrate the principle of employing a ladder-type backbone constitution to impart superior electrochemical properties into electronically active polymers.

Fluoride-Ion-Catalyzed Synthesis of Ladder-type Conjugated Benzobisbenzofurans via Intramolecular Nucleophilic Aromatic Substitution Reaction under Metal-free and Mild Conditions

The fluoride-ion-catalyzed synthesis of benzobisbenzofuran derivatives is described. Fluorine-containing aryl silyl ethers were reacted with 5 mol % of Bu₄NF to give desired compounds in high yield under mild conditions. Syn-selective cyclization reaction was discovered for a particular compound as a kinetic product. Computational analysis revealed that the fluorine substituents in the anti-type benzobisbenzofurans affect the order of the molecular orbitals.

BN-Embedded Polycyclic Aromatic Hydrocarbon Oligomers: Synthesis, Aromaticity, and Reactivity

BN-embedded oligomers with different pairs of BN units were synthesized by electrophilic borylation. Up to four pairs of BN units were incorporated in the large polycyclic aromatic hydrocarbons (PAHs). Their geometric, photophysical, electrochemical, and Lewis acidic properties were investigated by X-ray crystallography, optical spectroscopy, and cyclic voltammetry. The B-N bonds show delocalized double-bond characteristics and the conjugation can be extended through the trans-orientated aromatic azaborine units. Calculations reveal the relatively lower aromaticity for the inner azaborine rings in the BN-embedded PAH oligomers. The frontier orbitals of the longer oligomers are delocalized over the inner aromatic rings. Consequently, the inner moieties of the BN-embedded PAH oligomers are more active than the outer parts. This is confirmed by a simple oxidation reaction, which has significant effects on the aromaticity and the intramolecular charge-transfer interactions.

Metal-free polymerization: synthesis and properties of fused benzo[1,2-b:4,5-b′]bis[b]benzothiophene (BBBT) polymers

A family of fused semiconducting polymers containing the thienoacenes BBBT has been synthesized efficiently by non-metal and environmentally benign polymerization.

Hyperbranching-Enhanced-Emission Effect Discovered in Hyperbranched Poly(4-(cyanomethyl)phenyl methacrylate)

To disclose the effect of architecture over fluorescence behaviors of polymers, linear and hyperbranched poly(4-(cyanomethyl)phenyl methacrylate)s (PCPMAs) were synthesized by using atom transfer radical polymerization (ATRP). Compared to linear PCPMAs with weakly AIE (AIE: aggregation-induced-emission) characteristics and small-molecule analogues of 4-(cyanomethyl)phenyl isobutyrate (CPB) with ACQ (ACQ: aggregation-caused-quenching) behaviors, hyperbranched PCPMA showed dramatically stronger fluorescence at both solution and solid states and more significant AIE characteristics, which were further enhanced by increasing the branching degree, indicating a significant hyperbranching-enhanced-emission effect (HEE). The HEE effect was attributed to the strong promotion of hyperbranched architecture over the formation of a nitrile group cluster with through-space conjugation (TSC). The HEE effect provided a promising methodology to construct efficient nontraditional fluorescent polymers without large-conjugated, rigid, and planar emitter groups.