AgInSe2-Sensitized ZnO Nanoflower Wide-Spectrum Response Photoelectrochemical/Visual Sensing Platform via Au@Nanorod-Anchored CeO2 Octahedron Regulated Signal

A signal-on photoelectrochemical aptasensor based on ferrocene labeled triple helix DNA molecular switch for detection of antibiotic amoxicillin

A sensitive signal-on photoelectrochemical aptasensor for antibiotic determination was constructed based on the energy level matching between ferrocene and CuInS2. P-type CuInS2 microflower was complexed with reduced graphene oxide (CuInS2/rGO) to get photocathode current with good photoelectric conversion efficiency and stability. Then, hairpin DNA (HP) was covalently bonded to the electrode surface. A triple helix DNA (THMS) was used as a molecular switch. After the specific recognition between target and THMS in homogeneous solution, ferrocene labeled probe (Fc-T2) was released. Finally, Fc-T2 was captured by the HP, which leaded the obvious increase of photocurrent for the energy level matching between ferrocene and CuInS2. The increase of the photocurrent signal was proportional to the concentration of target amoxicillin (AMOX), the linear range was 100 fM-100 nM with detection limit of 19.57 fM. Meanwhile, the method has been successfully applied for milk and lake water samples analysis with satisfactory results.

Construction of a Functional Nucleic Acid-Based Artificial Vesicle-Encapsulated Composite Nanoparticle and Its Application in Retinoblastoma-Targeted Theranostics

Retinoblastoma (RB) is an aggressive tumor of the infant retina. However, the ineffective targeting of its theranostic agents results in poor imaging and therapeutic efficacy, which makes it difficult to identify and treat RB at an early stage. In order to improve the imaging and therapeutic efficacy, we constructed an RB-targeted artificial vesicle composite nanoparticle. In this study, the MnO2 nanosponge (hMNs) was used as the core to absorb two fluorophore-modified DNAzymes to form the Dual/hMNs nanoparticle; after loaded with the artificial vesicle derived from human red blood cells, the RB-targeted DNA aptamers were modified on the surface, thus forming the Apt-EG@Dual/hMNs complex nanoparticle. The DNA aptamer endows this nanoparticle to target the nucleolin-overexpressed RB cell membrane specifically and enters cells via endocytosis. The nanoparticle could release fluorophore-modified DNAzymes and supplies Mn2+ as a DNAzyme cofactor and a magnetic resonance imaging (MRI) agent. Subsequently, the DNAzymes can target two different mRNAs, thereby realizing fluorescence/MR bimodal imaging and dual-gene therapy. This study is expected to provide a reliable and valuable basis for ocular tumor theranostics.

Recent advances in photoelectrochemical platforms based on porous materials for environmental pollutant detection

Human health and ecology are seriously threatened by harmful environmental contaminants. It is essential to develop efficient and simple methods for their detection. Environmental pollutants can be detected using photoelectrochemical (PEC) detection technologies. The key ingredient in the PEC sensing system is the photoactive material. Due to the unique characteristics, such as a large surface area, enhanced exposure of active sites, and effective mass capture and diffusion, porous materials have been regarded as ideal sensing materials for the construction of PEC sensors. Extensive efforts have been devoted to the development and modification of PEC sensors based on porous materials. However, a review of the relationship between detection performance and the structure of porous materials is still lacking. In this work, we present an overview of PEC sensors based on porous materials. A number of typical porous materials are introduced separately, and their applications in PEC detection of different types of environmental pollutants are also discussed. More importantly, special attention has been paid to how the porous material's structure affects aspects like sensitivity, selectivity, and detection limits of the associated PEC sensor. In addition, future research perspectives in the area of PEC sensors based on porous materials are presented.

Dual-Signal Mode Ratiometric Photoelectrochemical Sensor Based on G-Quadruplex Hole Transport for Rapid and Sensitive Detection of miRNA-210

For rapid and sensitive detection of miRNA-210, which is important for improving the reliability of clinical diagnosis of breast cancer, a dual-signal mode ratiometric photoelectrochemical (PEC) sensor based on a Au/GaN photoanode is proposed. First, a DNA probe was designed that could complement the target miRNA-210. Then, another G-rich DNA sequence was designed to mismatch the probe and form a double-stranded DNA (dsDNA). Upon addition of the target, the dsDNA unwinds from its binding site and releases G-rich single-stranded DNA. In the presence of Mg2+ and K+, this single-stranded DNA molecule spontaneously forms a G-quadruplex structure, facilitating the rapid transport of photogenerated holes, thereby increasing the photocurrent response of Au/GaN and enabling sensitive label-free detection of miRNA-210. By control of different pH values, a response signal was generated at pH 8, while a reference signal was produced at pH 5. The designed PEC system shows a high potential for the development of miRNA-210 detection. Ultimately, the response signal-to-reference signal ratio was used as the variable, and a broad linear span ranging from 10 fM to 1 nM (R2 = 0.993) has been exhibited, with a detection threshold of 3 fM (S/N = 3). The designed PEC platform shows potential for the development of other disease markers.

Simultaneous detection of As(III/V), Cr(III/VI), and Fe(II/III) by a sensor array based on the morphology regulation of CeO2 oxidase

To develop a convenient method for simultaneous detection of As(III/V), Cr(III/VI), and Fe(II/III), three morphologies of CeO2 oxidase have been prepared. Based on the difference in oxidase activity and binding ability with substrate TMB of CeO2 of different morphologies, a 3 (Signal unit) × 6 (Target number) × 5 (Repetition) sensor array was constructed to realize simultaneous detection of six variable valence metal ions As(III/V), Cr(III/VI), and Fe(II/III). The lowest detection limit of the array for metal ions was 1.68 µg/L. The analysis of environmental samples with multiple metal ions (binary and ternary mixtures) co-existing has confirmed that the sensor array can achieve simultaneous qualitative and quantitative results for composite samples. This study not only revealed the influencing factors of crystal morphology regulation on oxidase activity, but also provided a scheme for the morphology detection of easily convertible metal ions in the field through the construction of the sensor array.

Immobilization-Free Photoelectrochemical Aptasensor for Atrazine Based on Bifunctional Graphene Signal Amplification and a Controllable Sulfhydryl-Assembled BiOBr/Ag NP Microinterface

Immobilization-free sensors (IFSs), with no requirement of fixing the recognition element to the electrode surface, have received increasing attention due to their unique advantages of reusable electrodes, not being limited by the load of the recognition element, and not being easily changed to the structure of the probe. In the present work, an effective visible light-driven immobilization-free photoelectric aptasensor for ultrasensitive detection of atrazine (ATZ) was proposed based on a reusable BiOBr/Ag NP substrate electrode with ultrafast charge transfer. Controllable thiols were used as conditioning agents for the photoelectric signal. The ingeniously designed bifunctional graphene can act as not only a molecular "bridge" for the ATZ aptamer through a strong π-π stacking effect, obtaining a graphene-aptamer complex, serving as a homogeneous recognition element, but also a switch for signal modulation for quantitative detection of target substances. Benefiting from the synergistic effect of the above-mentioned factors, the proposed sensor is capable of ultrasensitive and highly selective detection of ATZ in real water samples with a low detection limit of 1.2 pM and a wide linear range from 5.0 pM to 10.0 nM. Furthermore, it shows high stability, good selectivity, and strong anti-interference ability. Thus, this work has provided a fresh perspective for designing advanced immobilization-free photoelectric sensors and convenient detection of environmental pollutants.

A Direct-Contact Photocurrent-Direction-Switching Biosensing Platform Based on In Situ Formation of CN QDs/TiO2 Nanodiscs and Double-Supported 3D DNA Walking Amplification

Herein, a direct-contact photocurrent-direction-switching photoelectrochemical (PEC) biosensing platform for the ultrasensitive and selective detection of soluble CD146 (sCD146) is reported for the first time via in situ formation of carbon nitride quantum dots (CN QDs)/titanium dioxide (TiO2 ) nanodiscs with the double-supported 3D DNA walking amplification. In this platform, metal organic frameworks (MOFs)-derived porous TiO2 nanodiscs exhibit excellent anodic photocurrent, whereas a single-stranded auxiliary DNA (ssDNA) as biogate is absorbed onto the TiO2 nanodiscs to block active sites. Subsequently, with the help of intermediate DNAs from target sCD146-induced double-supported 3D DNA walking signal amplification, the ssDNA can leave away from the surface of TiO2 nanodiscs due to the specific hybridization with intermediate DNAs. Afterward, the successful direct contact of CN QDs on TiO2 nanodiscs by porosity and electrostatic adsorption, leads to the effective photocurrent-direction switching from anodic to cathodic photocurrent. Based on direct-contact photocurrent-direction-switching CN QDs/TiO2 nanodiscs system and double-supported 3D DNA walking signal amplification, sCD146 is detected sensitively with a wide linear range (10 fg mL-1 to 5 ng mL-1 ) and a low limit of detection (2.1 fg mL-1 ). Also, the environmentally friendly and direct-contact photocurrent-direction-switching PEC biosensor has an application prospect for cancer biomarker detection.

Recent advances in quantum dot-based fluorescence-linked immunosorbent assays

Fluorescence immunoassays have been given considerable attention among the quantitative detection methods in the clinical medicine and food safety testing fields. In particular, semiconductor quantum dots (QDs) have become ideal fluorescent probes for highly sensitive and multiplexed detection due to their unique photophysical properties, and the QD fluorescence-linked immunosorbent assay (FLISA) with high sensitivity, high accuracy, and high throughput has been greatly developed recently. In this manuscript, the advantages of applying QDs to FLISA platforms and some strategies for their application to in vitro diagnostics and food safety are discussed. Given the rapid development of this field, we classify these strategies based on the combination of QD types and detection targets, including traditional QDs or QD micro/nano-spheres-FLISA, and multiple FLISA platforms. In addition, some new sensors based on the QD-FLISA are introduced; this is one of the hot spots in this field. The current focus and future direction of QD-FLISA are also discussed, which provides important guidance for the further development of FLISA.

Light-Activated Interface Charge-Alternating Interaction on an Extended Gate Photoelectrode: A New Sensing Strategy for EGFET-Based Photoelectrochemical Sensors

Integration of extended gate field-effect transistors (EGFET) and photoelectrochemical (PEC) measurement to construct highly sensitive sensors is an innovative research field that was proven feasible by our previous work. However, it remains a challenge on how to adjust the interaction between the extended gate and the analyte and study its influence on EGFET-based PEC sensors. Herein, a new sensing strategy was proposed by a mutual electrostatic interaction. Three-dimensional TiO₂ and g-C₃N₄ core-shell heterojunction on flexible carbon cloth (TCN) was designed as the extended sensing gate. Tetracycline (TC) was also used as a model analyte, and it contains electron-donating groups (-NH₂ and -OH) with negative charge. The designed TCN-extended sensing gate was negatively charged in the dark by introducing carbon vacancies with oxygen doping in the g-C₃N₄ shell, while it was positively charged under illustration due to the aggregation of photogenerated holes on the surface. Therefore, a light-activated PEC sensing platform for the sensitive and selective determination of tetracycline (TC) was demonstrated. Such a PEC sensor exhibited wide linear ranges within 100 pM to 1 μM and 1-100 μM with a low detection limit of 0.42 pM. Furthermore, the sensing platform possessed excellent selectivity, good reproducibility, and stability. The proposed sensing strategy in this work can expand the paradigm for developing a light-regulated FET-based PEC sensor by mutual electrostatic interaction, and we believe that this work will offer a new perspective for the design of interface interaction in PEC devices.

Photoelectrochemical immunoassay for thyroglobulin on nanogold-functionalized BiVO4 photoanode coupling with enzymatic biocatalytic precipitation

Methods derived from photoelectrochemical (PEC) have been constructed for immunoassays, but most involve the split-type immunoreaction modes, and thus easily cause unpredictable intermediate precision. Herein, we innovatively designed an integrated PEC immunosensing platform for the quantitative monitoring of thyroglobulin (TG) on the gold nanoparticles (AuNPs)-functionalized BiVO₄ photoanode coupling with enzymatic biocatalytic precipitation (EBCP). This sensing system could simultaneously implement the immunoreaction and photocurrent measurement. Anti-TG capture antibodies were modified onto AuNPs-decorated BiVO₄ photoelectrode. A sandwich-type immunoreaction was carried out in the presence of target TG using horseradish peroxidase (HRP)-conjugated anti-TG detection antibody. The carried HRP molecules catalyzed 4-chloro-1-naphthol (4-CN) to generate an insoluble benzo-4-chlorohexadienone product on the photoanode in the presence of peroxide hydrogen, thereby decreasing the photocurrent. Under optimal conditions, the PEC immunosensors gave good photocurrent responses toward target TG within the dynamic range of 0.01-10 ng mL^-1 at a detection limit of 7.6 pg mL^-1. Good repeatability and precision, high specificity and acceptable storage stability were acquired during the measurement. No significant differences were encountered for screening 15 human serum specimens between the developed PEC immunoassay and commercially available enzyme-linked immunosorbent assay (ELISA) method for the detection of target TG. Significantly, PEC immunosensing system offers promise for simple and cost-effective analysis of disease-related biomarkers.

Engineering the Signal Transduction between CdTe and CdSe Quantum Dots for in Situ Ratiometric Photoelectrochemical Immunoassay of Cry1Ab Protein

Controllable modulation of a response mode is extremely attracting to fabricate biosensor with programmable analytical performances. Here, we reported a proof-of-concept ratiometric photoelectrochemical (PEC) immunoassay of Cry1Ab protein based on the signal transduction regulation at the sensing interface. A sandwich-type PEC structure was designed so that gold nanorods sensitized quantum dots to fix primary antibody (Au NRs/QDs-Ab₁) and methylene blue sensitized QDs to combine a second antibody (MB/QDs-Ab₂), which served as photoelectric substrate and signal amplifier, respectively. Unlike common recognition element, such a sandwich-type PEC structure allowed for the in situ generation of two specific response signals. For analysis, Cry1Ab captured by Au NRs/QDs-Ab₁ led to a decreased photocurrent (I_Cry1Ab), while the subsequently anchored MB/QDs-Ab₂ produced another photocurrent (I_MB). Noteworthy, by taking advantage of the different energy band gaps of QDs, varying locations of CdTe and CdSe QDs could realize different signal transduction strategies (i.e., Mode 1 and Mode 2). Investigations on data analysis of I_Cry1Ab and I_MB via different routes demonstrated the superior analytical performances of ratiometry (Mode 1). Consequently, the ratiometric PEC immunosensor offered a linear range of 0.01-100 ng mL^-1 with a detection limit of 1.4 pg mL^-1. This work provides an efficient strategy for in situ collection of multiple photocurrents to design ratiometric PEC sensors.

AuNPs/CdS QDs/CeO2 ternary nanocomposite coupled with scrollable three-dimensional DNA walker mediated cycling amplification for sensitive photoelectrochemical miRNA assay

Herein, a novel ternary nanocomposite (AuNPs/CdS QDs/CeO₂) with excellent photoelectrochemical (PEC) performance was synthesized as signal probe to construct a near-zero background biosensor for sensitive miRNA-182-5p detection, by integrating with a scrollable three-dimensional (3D) DNA walker mediated cleavage cycling amplification. Impressively, the formation and rolling of scrollable 3D DNA walker triggered by target could realize dynamic, rapid and specific digestion of hairpin DNA on electrode with the aid of Exonuclease III (Exo III), which thus exposed abundant binding sites for assembling stable DNA labeled AuNPs/CdS QDs/CeO₂ nanoprobes. Thanks to the formation of type-II heterojunction (between CeO₂ and CdS QDs) and Schottky junction (generated by CeO₂ and AuNPs), an ideal photoelectric conversion efficiency accompanied with stunningly improved photocurrent was thus acquired for significantly improving the detection sensitivity. It turned out that the detection limit (LOD) of biosensor was ultralow (31 aM). Significantly, the proposed PEC biosensor would exhibit great potential for the composite as a splendid indicator and provide an avenue for constructing the sensing platform with excellent sensitivity and ultralow background.

A Novel Signaling Strategy for an Ultrasensitive Photoelectrochemical Immunoassay Based on Electro-Fenton Degradation of Liposomes on a Photoelectrode

A signaling strategy can directly determine the analytical performance and application scope of photoelectrochemical (PEC) immunoassays, so it is of great significance to develop an effective signaling strategy. The electro-Fenton reaction has been extensively used to degrade organic pollutants, but it has not been applied to PEC immunoassays. Herein, we report a novel signaling strategy for a PEC immunoassay based on electro-Fenton degradation of liposomes (Lip) on a photoelectrode. Lip vesicles are coated on Au@TiO₂ core-shell photoactive material, which can prevent ascorbic acid (AA) from scavenging photogenerated holes. In the presence of a target, the immunomagnetic bead labels are converted to Fe³⁺ for electro-Fenton reaction, and hydroxyl radicals generated by the electro-Fenton reaction can degrade the Lip vesicles on the photoelectrode. Because of the degradation of Lip vesicles, photogenerated holes can be scavenged more effectively by AA, leading to an increase in photocurrent. Based on the electro-Fenton-regulated interface electron transfer, the sensitive "signal on" PEC immunoassay of a carcinoembryonic antigen is achieved, which features a dynamic range from 0.05 to 5 × 10⁴ pg mL^-1 and a detection limit of 0.01 pg mL^-1. Our work provides a novel and efficient PEC immunoassay platform by introducing the electro-Fenton reaction into PEC analysis.

Sensitive photoelectrochemical determination of T4 polynucleotide kinase using AuNPs/SnS2/ZnIn2S4 photoactive material and enzymatic reaction-induced DNA structure switch strategy

We report here Au nanoparticles (AuNPs)/SnS₂/ZnIn₂S₄ as a high-performance active material for sensitive photoelectrochemical (PEC) determination of T4 polynucleotide kinase (T4 PNK) using an enzymatic reaction-induced DNA structure switch strategy. To construct the PEC biosensor, a double-stranded DNA probe consisting of a CdS quantum dots (QDs)-labeled single-stranded DNA (sDNA) and its complementary DNA (cDNA) is immobilized on the AuNPs/SnS₂/ZnIn₂S₄ photoactive material. T4 PNK can catalyze the phosphorylation of 5'-OH-terminated sDNA in the double-stranded DNA probe when ATP is present, and λ-exonuclease can catalyze the degradation of the phosphorylated sDNA into small fragments. Then the cDNA forms a hairpin structure so that CdS QDs and AuNPs are in close contact, which can induce exciton-plasma interactions between CdS QDs and AuNPs. The exciton-plasma interactions significantly boost the photocurrent, enabling the "signal on" PEC determination of T4 PNK in the range of 10^-4 - 1 U mL^-1 with a detection limit of 6 × 10^-5 U mL^-1. The PEC biosensor can also be used to screen enzyme inhibitors.

Dual-Engine Powered Paper Photoelectrochemical Platform Based on 3D DNA Nanomachine-Mediated CRISPR/Cas12a for Detection of Multiple miRNAs

This work proposed a novel double-engine powered paper photoelectrochemical (PEC) biosensor based on an anode-cathode cooperative amplification strategy and various signal enhancement mechanisms, which realized the monitoring of multiple miRNAs (such as miRNA-141 and miRNA-21). Specifically, C₃N₄ quantum dots (QDs) sensitized ZnO nanostars and BiOI nanospheres simultaneously to construct a composite photoelectric layer that amplified the original photocurrent of the photoanode and photocathode, respectively. Through the independent design and partition of a flexible paper chip to functionalize injection holes and electrode areas, the bipolar combination completed the secondary upgrade of signals, which also provided biological reaction sites for multitarget detection. With the synergistic participation of a three-dimensional (3D) DNA nanomachine and programmable CRISPR/Cas12a shearing tool, C₃N₄ QDs lost their attachment away from the electrode surface to quench the signal. Moreover, electrode zoning significantly reduced the spatial cross talk of related substances for multitarget detection, while the universal trans-cleavage capability of CRISPR/Cas12a simplified the operation. The designed PEC biosensor revealed excellent linear ranges for detection of miRNA-141 and miRNA-21, for which the detection limits were 5.5 and 3.4 fM, respectively. With prominent selectivity and sensitivity, the platform established an effective approach for trace multitarget monitoring in clinical applications, and its numerous pioneering attempts owned favorable reference values.

Molecular Imprinted Poly(2,5-benzimidazole)-Modified VO2-CuWO4 Homotype Heterojunction for Photoelectrochemical Dopamine Sensing

A photoactive molecularly imprinted poly(2,5-benzimidazole)-modified vanadium dioxide-cupric tungstate (VO₂-CuWO₄) as an efficient photosensitive n-n type-II heterojunction thin film was electrochemically deposited on Ti substrate for the selective and robust photoelectrochemical (PEC) bioanalysis of dopamine (DA). The optical absorption of n-VO₂/n-CuWO₄ type-II heterojunction was capably broadened toward the visible region, which permitted superior light-harvesting and robust carriers generation, separation, and transfer processes significantly enhancing the anodic photocurrent, as confirmed by a series of PEC analyses. Findings revealed that the as-prepared label-free MIP-PEC sensor can quantitatively monitor DA in a linear range of 1 nM to 200 μM with a detection limit of 0.15 nM. This MIP-PEC sensor showed robust selectivity under conditions with high concentrations of interfering substances, which can be recovered in the real samples of urine, cocoa chocolate, and diluted yogurt, indicating its promising potential applications in biological and food samples. This work not only featured the use of photoelectrically active MIP/VO₂-CuWO₄ for PEC detection of DA, but also provided a new horizon for the design and implementation of functional polymers/metal oxides heterojunction materials in the field of PEC sensors and biosensors.

Recent Advances of Nanostructured Materials for Photoelectrochemical Bioanalysis

Nowadays, the emerging photoelectrochemical (PEC) bioanalysis has drawn intensive interest due to its numerous merits. As one of its core elements, functional nanostructured materials play a crucial role during the construction of PEC biosensors, which can not only be employed as transducers but also act as signal probes. Although both chemical composition and morphology control of nanostructured materials contribute to the excellent analytical performance of PEC bioassay, surveys addressing nanostructures with different dimensionality have rarely been reported. In this review, according to classification based on dimensionality, zero-dimensional, one-dimensional, two-dimensional, and three-dimensional nanostructures used in PEC bioanalysis are evaluated, with an emphasis on the effect of morphology on the detection performances. Furthermore, using the illustration of recent works, related novel PEC biosensing patterns with promising applications are also discussed. Finally, the current challenges and some future perspectives in this field are addressed based on our opinions.

Amplified detection signal at a photoelectrochemical aptasensor with a poly(diphenylbutadiene)-BiOBr heterojunction and Au-modified CeO2 octahedrons

A major aspect of this work is the synergistic application of a poly(diphenylbutadiene)-BiOBr composite and a gold nanoparticle-linked CeO₂ octahedron to develop a photoelectrochemical aptasensor with an easily measurable detection signal change. Specifically, poly(diphenylbutadiene) nanofiber-immobilised BiOBr flower-like microspheres were developed as a hybrid material with a heterojunction that facilitates high visible light absorption and efficient photo-generated charge separation, which are essential features for sensitive photoelectrochemical sensors. The model analyte acetamiprid was attached via its specific aptamer on the aptasensor. Separately, a gold nanoparticle-linked CeO₂ octahedron was strategically used to significantly diminish the photocurrent by impeding electron transfer at the aptasensor surface. After acetamiprid binding, the CeO₂ octahedrons were displaced from the aptasensor. This caused a weakened quenching effect and restored the photocurrent to accomplish an "on-off-on" detection mechanism. This photoelectrochemical aptasensor exhibited a detection limit of 0.05 pM over a linear range of 0.1 pM-10 μM acetamiprid. The use of an aptamer has provided good specificity to acetamiprid and anti-interference. In addition, an ∼5.8% relative standard deviation was estimated as the reproducibility of the photoelectrochemical aptasensor. Furthermore, nearly 90% of the initial photocurrent was still measurable after storing these aptasensors at room temperature for 4 weeks, demonstrating their stability.

Novel optoelectronic metal organic framework material perylene tetracarboxylate magnesium: preparation and biosensing

The pursuit for improving photoelectrochemical (PEC) performances of organic materials remains an urgent need. Here, we have proposed an envision of the preparation the metal-organic frameworks (MOFs) with arenes to realize high photo-to-current conversion efficiency and excellent PEC performances. Magnesium 3,4,9,10-perylene tetracarboxylic acid metal-organic frameworks (Mg-PTCA MOFs) were synthesized for the first time. The uniformly distributed and regular-shaped Mg-PTCA MOFs showed a much more stable and higher photocurrent than the single PTCA and its derivatives, which confirmed our hypothesis. A regenerated-biosensor was designed for microRNA analysis based on Mg-PTCA MOFs as a novel photoelectric material, target-triggered three-dimensional DNA Scaffold (3D-Sca) as an efficient signal amplifier, and gold nanoclusters (Au NCs) as quencher. The elaborately designed biosensor achieved ultrasensitive detection for miRNA 21 with a dynamic range from 10 aM to 10 pM and a detection limit of 2.8 aM. This biosensor showed good analytical performance in the extracts of different cancer cells, indicating the possibility for early diagnosis, timely staging assessment, and accurate prognostic judgment for diseases. The recommendable performances of Mg-PTCA MOFs highlight the significance of organic MOFs in PEC sensing.

Photoelectrochemical Assay Based on SnO2/BiOBr p-n Heterojunction for Ultrasensitive DNA Detection

Herein, a photoelectrochemical (PEC) assay was designed for a highly sensitive DNA determination relying upon the SnO₂/BiOBr p-n heterojunction as a photoactive material and SiO₂ as a signal quencher. Compared with most traditional heterojunctions, the SnO₂/BiOBr p-n heterostructure not only lessened the recombination of the photogenerated electron-hole pairs but also promoted the light-harvesting in the ultraviolet-visible (UV-vis) region, leading to further enhanced photoelectric conversion efficiency and photocurrent, which demonstrated 12.1-fold and 6.4-fold increments versus those of pure SnO₂ and BiOBr, respectively. Additionally, the limited quantity of target DNA (a fragment of p53 gene) could be transformed into abundant output DNA-SiO₂ by employing the Nt·BstNBI enzyme-assisted signal amplification procedure, leading to a highly improved detection sensitivity of the biosensor. Then, output DNA-SiO₂ hybridized with the capture DNA anchored on the modified electrode surface, remarkably diminishing the PEC signal and thus achieving sensitive DNA determination. The elaborated PEC biosensor demonstrated outstanding performance within the linear range between 0.5 fM and 5 nM and a low limit of detection down to 0.18 fM, paving a new way for fabricating heterojunction with exceptional photoactive performance and demonstrating the enormous potential for detecting multitudinous biomarkers in bioanalysis and clinical therapy.

Nanostructured Ceria: Biomolecular Templates and (Bio)applications

Ceria (CeO2) nanostructures are well-known in catalysis for energy and environmental preservation and remediation. Recently, they have also been gaining momentum for biological applications in virtue of their unique redox properties that make them antioxidant or pro-oxidant, depending on the experimental conditions and ceria nanomorphology. In particular, interest has grown in the use of biotemplates to exert control over ceria morphology and reactivity. However, only a handful of reports exist on the use of specific biomolecules to template ceria nucleation and growth into defined nanostructures. This review focusses on the latest advancements in the area of biomolecular templates for ceria nanostructures and existing opportunities for their (bio)applications.

Cathode-Anode Spatial Division Photoelectrochemical Platform Based on a One-Step DNA Walker for Monitoring of miRNA-21

Photoelectrochemical (PEC) biosensors carried out the whole reaction process in the same solution, which would limit the sensitivity and selectivity of detection in the sensing system. Herein, we reported a promising new cathode-anode spatial division PEC platform based on the two-electrode synergistic enhancement strategy. With the photoanode and photocathode integrated in the same current circuit, the platform exhibited an increased photocurrent response, as well as an improved anti-interference ability led by separating the two electrodes spatially. In this proposal, red light-driven AgInS₂ nanoparticles (NPs) served as the photoanode to build biometric steps and amplify the signal, whereas p-type PbS quantum dots were selected as the photocathode to increase the signal. With the participation of alkaline phosphatase (ALP) labeled on Au NPs-DNA, ascorbic acid 2-phosphate was catalyzed to produce ascorbic acid as an electron donor, resulting in the enhancement of the PEC signal. Interestingly, in the presence of miRNA-21 and T7 Exo, the one-step DNA walker amplification can be triggered to reduce the PEC signal by releasing ALP-Au NP-DNA. The constructed PEC biosensor exhibited a detection limit of as low as 3.4 fM for miRNA-21, which was expected to be applied to early clinical diagnosis. Also, we believe that the proposed cathode-anode spatial division PEC platform can open up a new view for the establishment of other types of PEC biosensors.

Bi2S3@MoS2 Nanoflowers on Cellulose Fibers Combined with Octahedral CeO2 for Dual-Mode Microfluidic Paper-Based MiRNA-141 Sensors

An effective dual-mode microfluidic paper-based analysis device (μPAD) was proposed via Bi₂S₃@MoS₂ nanoflowers combined with octahedral CeO₂ for ultrasensitive miRNA-141 bioassay. To obtain the amplified electrochemical signal, Bi₂S₃@MoS₂ nanoflowers were first in situ grown onto the surface of cellulose fibers to promote the reduction of H₂O₂. The prism-anchored octahedral CeO₂ nanoparticles with a great catalytic function on the reduction of H₂O₂ were linked up to the functionalized cellulose fibers through the hybridization chain reaction to further enhance the electrochemical signal. By means of the catalysis effect of Bi₂S₃@MoS₂ nanoflowers and octahedral CeO₂ nanoparticles, the obtained signal was amplified, thereby achieving ultrasensitive electrochemical detection of the target. With the help of duplex specific nuclease, the octahedral CeO₂ could be released from the electrochemical detection area and flow to the color channel through capillary action, which could initiate the oxidation reaction of 3,3',5,5'-tetramethylbenzidine in the existence of H₂O₂ to generate a blue visual band, avoiding the error of distinguishing color depth caused by the naked eye and thus improving the accuracy of the visual method. Under the optimal conditions, satisfactory prediction and accurate detection performance were achieved in the range of 10 fM-1 nM and 0.5 fM-1 nM, respectively, by measuring the length of the blue product and the electrochemical signal intensity. The electrochemical/visual detection limits of the proposed μPAD for miRNA-141 were as low as 0.12 and 2.65 fM (S/N = 3). This work provides great potential for the construction of low-cost and high-performance dual-mode biosensors for the detection of biomarkers.

A new photoelectrochemical biosensor based on FeOOH and exonuclease III-aided dual recycling signal amplification for HPV-16 detection

Herein, based on iron oxyhydroxide (FeOOH) as the photoactive material and exonuclease III (exo III)-aided dual recycling signal amplification, a new photoelectrochemical (PEC) biosensor was successfully developed for human papillomavirus-16 (HPV-16) detection with a wide linear range from 0.5 fM to 1 nM and a low detection limit of 0.17 fM.

Construction of 3D Bi/ZnSnO3 hollow microspheres for label-free highly selective photoelectrochemical recognition of norepinephrine

Herein, we reported a label-free and reliable photoelectrochemical (PEC) platform for highly selective monitoring of norepinephrine (NE) based on metallic Bi nanoparticles anchored on hollow porous ZnSnO3 microspheres (3D Bi/ZnSnO3) via a simple solvothermal strategy. The designed 3D Bi/ZnSnO3 Schottky junction exhibited a unique photoanodic response toward NE among other catechol derivatives, such as epinephrine (EP) and dopamine (DA), and effectively shielded the interference from thirteen coexisting biomolecules like uric acid (UA) and ascorbic acid (AA). High selectivity and excellent sensitivity could be correlated to the unique chelating coordination interaction between NE and Zn2+ at surface sites as well as the efficient carrier separation of Bi/ZnSnO3, thereby developing a novel "signal-on" label-free and selective strategy for NE detection. The proposed Bi/ZnSnO3-based PEC sensor achieved remarkable NE biosensing with a low detection limit of 0.68 nmol L-1 and a wide response ranging from 0.002 to 350.0 μmol L-1. The applicability of this biosensor was realized for the selective analysis of NE in human serum, human urine and injection samples, laying the foundation for the label-free PEC monitoring of NE in biological fluids.

Engineering paper-based visible light-responsive Sn-self doped domed SnO2 nanotubes for ultrasensitive photoelectrochemical sensor

Exploring novel photoactive materials with high photoelectric conversion efficiency plays a crucial role in enhancing the analytical performance of paper-based photoelectrochemical (PEC) biosensor. SnO₂, which possesses higher photostability and electron mobility, can be regarded as a promising photoactive material. Herein, paper-based one dimensional (1D) domed SnO₂ nanotubes (NTs) have been developed with the template-consumption strategy. What's more, their growth mechanism has also been proposed based on the controllable experiments. At first, the paper-based 1D ZnO nanorods (NRs) as the typical amphoteric oxide are prepared and serve as the sacrifice templates which can be etched by the generated alkaline environment during the formation of SnO₂. At a certain stage, all the ZnO NRs can be completely etched by controlling the experimental conditions, resulting in the forming of vertically distributed hollow SnO₂ NTs. Furthermore, the Sn self-doping strategy is also proposed to suppress the recombination of charge carriers and broaden the light response range by introducing the impurity energy levels. Profiting from such doping strategy, the prominent photocurrent signal is obtained compared with pure paper-based SnO₂ NTs. Ultimately, an innovative visible light responsive paper-based Sn-doping SnO_2-x NTs are developed and employed as the photoelectrode for the PEC biosensor using the alpha fetoprotein (AFP) as the model analyte. Under the optimal conditions, the ultrasensitive AFP sensing is realized with the linear range and detection limitation of 10 pg mL^-1 to 200 ng mL^-1 and 3.84 pg mL^-1, respectively. This work provides a judiciously strategy for developing novel photoactive materials for paper-based PEC bioanalysis.

Ultrasensitive Microfluidic Paper-Based Electrochemical/Visual Analytical Device via Signal Amplification of Pd@Hollow Zn/Co Core-Shell ZIF67/ZIF8 Nanoparticles for Prostate-Specific Antigen Detection

An effective signal amplification strategy is essential to enhance the analytical performance of microfluidic paper-based analytical devices (μPADs) for tracing biomarkers. Here, a simple but efficient approach with superior electrocatalytic performance of Pd@hollow Zn/Co core-shell ZIF67/ZIF8 nanoparticles for regulating the efficacious signal amplification process was utilized to realize the detection of prostate-specific antigen (PSA). By rationally designing the core-shell structure of ZIF67/ZIF8 with hollow characteristics on the nanoscale and introducing the noble metal element Pd into the cavity, the diffusion limitation and porous confinement reduction of the obtained nanomaterials with uniform morphology and satisfactory chemical stability could be realized, which endowed it with better catalytic performance than solid metal-organic frameworks (MOFs) and ensured effective signal amplification of H₂O₂ reduction for achieving enhanced electrochemical signals. Moreover, with the assistance of signal probes, the remaining H₂O₂ could flow to the color area to catalyze the oxidation of 3,3',5,5'-tetramethylbenzidine to form a colored product by changing the spatial configuration of the μPAD, thus realizing the visual detection of PSA. On the basis of this novel analytical device, dual-mode ultrasensitive detection of PSA could be achieved with a lower limit of detection of 0.78 pg/mL (S/N = 3) and a wider linear range from 5 pg/mL to 50 ng/mL. This work provided the opportunity of introducing the noble metal element Pd into the cavity of the MOF hollow structure to improve its electrocatalytic efficiency and construct a high-performance μPAD for clinical detection of other biomarkers.

A versatile switchable dual-modal colorimetric and photoelectrochemical biosensing strategy via light-controlled sway of a signal-output transverter

A design criterion to construct a versatile dual-modal colorimetric and PEC biosensing platform for switching the corresponding mode freely is proposed via integration of a natural enzyme, light-activated nanozyme and light-controlled swayable signal-output transverter. A switchable dual-modal platform toward DNA analysis is developed as a proof of concept.

Magnetic-Assisted Methylene Blue-Intercalated Amplified dsDNA for Polarity-Switching-Mode Photoelectrochemical Aptasensing

Organic dyes are typically applied as photosensitizers in photoelectrochemical (PEC) cells but have not been reported in polarity-reversal-mode PEC sensors with excellent sensitivity and accuracy. Herein, an elegant and robust PEC biosensor for carcinoembryonic antigen (CEA) has been designed by photocurrent polarity switching of CdTe quantum dots (QDs), which is obtained by embedding methylene blue (MB) into amplified double-stranded DNA (dsDNA) anchored to the superparamagnetic Fe₃O₄@SiO₂. The target-triggered Exo III-assisted cyclic amplification strategy and in situ magnetic enrichment enable the remarkable sensitivity. The extraction of target-analogue single-stranded DNA (output DNA) contributes to high selectivity resulting from the elimination of possible interferences in real samples or matrixes. Particularly, this exclusive polarity-reversal-mode PEC aptasensing can efficiently eliminate the false-positive or false-negative signals, leading to accurate measurements. Moreover, different from the probes and layer-by-layer assembled photoelectric beacons on electrodes in advance, this rational split-type approach is doomed to help the PEC biosensor with additional merits of convenient fabrication, short time consumption, wider linearity, as well as outstanding reproducibility and stability in practical applications. In light of the ability of MB acting as a kind of signal probe in typical electrochemical sensors, certainly, this ingenious design can not only be extended to a wide variety of target monitoring but also provide new ideas for the construction of high-performance electrochemical and PEC biosensors.

CuS QDs/Co3O4 Polyhedra-Driven Multiple Signal Amplifications Activated h-BN Photoeletrochemical Biosensing Platform

Herein, we developed an unmodified hexagonal boron nitride (h-BN) photoelectrochemical (PEC) biosensing platform with a low background signal and high sensitivity based on CuS quantum dots (QDs)/Co₃O₄ polyhedra-driven multiple signal amplifications. The prepared porous h-BN nanosheets with large specific surface areas, as the photoelectric substrate material, can provide extensive active reaction sites. Meanwhile, the CuS QDs/Co₃O₄ polyhedra were synthesized by the zeolitic imidazolate framework (ZIF-67) and utilized as a multiple signal amplifier, which can not only drive the p-n semiconductor quenching effect to compete with the h-BN photoelectrode for the consumption of electron donors and exciting light but also trigger a mimetic enzymatic catalytic precipitation effect to inhibit electron transfer. The quenching ability and peroxidase-like activity of CuS QDs/Co₃O₄ polyhedra were evaluated to prove its superiority, and the possible mechanisms of electron transfer and enzymatic catalytic were further analyzed in detail. The developed PEC biosensing platform for the chlorpyrifos assay presented outstanding performance with a wide linear range from 1 × 10^-1 to 1 × 10⁷ ng mL^-1 and a low detection limit of 0.34 pg mL^-1 and exhibited excellent selectivity, reproducibility, and stability. In addition, the CuS QDs/Co₃O₄ polyhedra-activated h-BN PEC biosensing platform may exhibit universality for various analytes via replacing the corresponding target aptamer sequence. This work provides a remarkable inspiration and valuable reference for the development of the PEC biosensor, and the signal amplifier-enabled unmodified PEC biosensing platform strategy has a bright application in early safety warning, bioanalysis and clinical diagnosis.

Ultra-small aqueous glutathione-capped Ag–In–Se quantum dots: luminescence and vibrational properties

A direct aqueous synthesis, composition- and size-dependent absorption, photoluminescence, and vibrational properties of ultra-small glutathione-capped Ag-deficient Ag–In–Se quantum dots are reported.