Paper-Based Constant Potential Electrochemiluminescence Sensing Platform with Black Phosphorus as a Luminophore Enabled by a Perovskite Solar Cell

Low-Triggering-Potential and Narrow-Potential-Window Electrochemiluminescence of Silver Nanoclusters for Gene Assay

A low-triggering potential and a narrow-potential window are anticipated to decrease the electrochemical interference and cross talk of electrochemiluminescence (ECL). Herein, by exploiting the low oxidative potential (0.82 V vs Ag/AgCl) of dihydrolipoic acid-capped sliver nanoclusters (DHLA-AgNCs), a coreactant ECL system of DHLA-AgNCs/hydrazine (N2H4) is proposed to achieve efficient and oxidative-reduction ECL with a low-triggering potential of 0.82 V (vs Ag/AgCl) and a narrow-potential window of 0.22 V. The low-triggering-potential and narrow-potential-window nature of ECL can be primarily preserved upon labeling DHLA-AgNCs to probe DNA and immobilizing DHLA-AgNCs onto the Au surface via sandwiched hybridization, which eventually enables a selective ECL strategy for the gene assay at +0.82 V. This gene assay strategy can sensitively determine the gene of human papillomavirus from 10 to 1000 pM with a low limit of detection of 5 pM (S/N = 3) and would open a way to improve the applied ECL bioassay.

Dual-microRNA-Controlled Electrochemiluminescence Biosensor for Breast Cancer Diagnosis and Supplemental Identification of Breast Cancer Metastasis

Breast cancer remains the most frequently diagnosed cancer globally, and the metastasis of this malignancy is the primary cause of mortality in breast cancer patients. Hence, prompt diagnosis and timely detection of metastatic breast cancer are critical for effective therapeutic intervention. Both progression and metastasis of this malignancy are closely associated with aberrant expression of specific microRNAs (miRNAs) and enzymes. To facilitate breast cancer diagnosis and concomitant identification of metastatic breast cancer, we have engineered an innovative electrochemiluminescence (ECL)-based sensing platform integrated with enzyme-free DNA amplification circuits for dual functionality. Specifically, microRNA-21 (miR-21) is employed as a biomarker for breast cancer, and miR-21 induces the quenching of the ECL signal from luminophores via a strategically designed catalytic three-hairpin assembly (CTHA) circuit. Subsequently, miR-105 levels are measured via toehold-mediated strand displacement reactions (TSDR). Here, miR-105 restores the initially quenched ECL signal, enabling the assessment of the metastatic propensity. Our experimental data demonstrate that the devised ECL biosensor offers broad linear detection ranges and low detection limits for both miR-21 and miR-105. Importantly, our novel platform was also successfully validated by using cellular and serum samples. This biosensor not only discriminates breast cancer cell lines MCF-7 and MDA-MB-231 from nonbreast cancer cells like HepG2, TPC-1, and HeLa, but it also distinguishes between malignant MCF-7 and metastatic MDA-MB-231 cells. Consequently, our novel approach holds significant promise for clinical applications and precise cancer screening.

Smartphone-based 3D-printed electrochemiluminescence enzyme biosensor for reagentless glucose quantification in real matrices

Three-dimensional (3D) printed electrochemical devices are increasingly used in point-of-need and point-of-care testing. They show several advantages such as simple fabrication, low cost, fast response, and excellent selectivity and sensitivity in small sample volumes. However, there are only a few examples of analytical devices combining 3D-printed electrodes with electrochemiluminescence (ECL) detection, an electrochemical detection principle widely employed in clinical chemistry analysis. Herein, a portable, 3D-printed miniaturized ECL biosensor for glucose detection has been developed, based on the luminol/H₂O₂ ECL system and employing a two-electrode configuration with carbon black-doped polylactic acid (PLA) electrodes. The ECL emission is obtained by means of a 1.5V AA alkaline battery and detected using a smartphone camera, thus providing easy portability of the analytical platform. The ECL system was successfully applied for sensing H₂O₂ and, upon coupling the luminol/H₂O₂ system with the enzyme glucose oxidase, for glucose detection. The incorporation of luminol and glucose oxidase in an agarose hydrogel matrix allowed to produce ECL devices preloaded with the reagents required for the assay, so that the analysis only required sample addition. The ECL biosensor showed an excellent ability to detect glucose up to 5 mmol L^-1, with a limit of detection of 60 μmol L^-1. The biosensor was also used to analyse real samples (i.e., glucose saline solutions and artificial serum samples) with satisfactory results, thus suggesting its suitability for point-of-care analysis. Coupling with other oxidases could further extend the applicability of this analytical platform.

Arginine-modified black phosphorus quantum dots with dual excited states for enhanced electrochemiluminescence in bioanalysis

The electrochemiluminescence (ECL) is generally emitted via radiative transition of singlet or triplet excited state (S₁ or T₁). Herein, an ECL mechanism with the transitions of both S₁ and T₁ of black phosphorus quantum dots (BPQDs) is found, and an arginine (Arg) modification strategy is proposed to passivate the surface oxidation defects of BPQDs, which could modulate the excited states for enhancing the ECL efficiency of BPQDs. The Arg modification leads to greater spatial overlap of highest and lowest occupied molecular orbitals, and spectral shift of radiative transitions, and improves the stability of anion radical of BPQDs. To verify the application of the proposed mechanism, it is used to construct a sensitive method for conveniently evaluating the inhibiting efficiency of cyclo-arginine-glycine-aspartic acid-d-tyrosine-lysine to cell surface integrin by using Arg containing peptide modified BPQDs as signal tag. The dual excited states mediated ECL emitters provide a paradigm for adjustable ECL generation and extend the application of ECL analysis.

Ultrasensitive dual-signal electrochemical ratiometric aptasensor based on Co-MOFs with intrinsic self-calibration property for Mucin 1

The concentration of tumor biomarker Mucin 1 (MUC 1) is highly related with many diseases, which can be employed for the early diagnosis of cancer. In this paper, an electrochemical ratiometric aptasensor with intrinsic self-calibration property for the detection of MUC 1 is presented. In this paper, Co-MOFs themselves were employed as signal substances. This strategy was fabricated by using gold nanoparticles@black phosphorus (BP) as the substrate on the electrode, followed by modification of DNA nanotetrahedrons (DTN) via Au-S bond. The terminal of DTN contains MUC 1 aptamer. In the presence of MUC 1, the signal of DNA-labeled Co-MOFs can be detected. The current signal of Co-MOFs increased and that of thionine (as reference) was unchanged upon the addition of MUC 1. Thus, an intrinsic self-calibration aptasensor was achieved. In order to simplify the modification procedure, the electrolyte solution thionine was employed as an inner reference probe. Moreover, coupling of the hybridization chain reaction (HCR) with these MOFs signal tags presents an enzyme-free method for signal amplification, endowing the proposed ratiometric biosensor detection with high reproducibility and high sensitivity. The current ratio (I_IR/I_SP) remained stable over 30 individual measurements performed on ten different working electrodes. Even ten repeated scans performed on a single electrode exhibited a constant current ratio. The electrochemical ratiometric aptasensor is highly sensitivity for MUC 1 with the detection limit of 1.34 fM. Our proposed ratiometric sensor has great potential for the detection of cancer-related biomarkers.

Gold nanoparticle-based signal amplified electrochemiluminescence for biosensing applications

Since the content levels of biomarkers at the early stage of many diseases are generally lower than the detection threshold concentration, achieving ultrasensitive and accurate detection of these biomarkers is still one of the major goals in bio-analysis. To achieve ultrasensitive and reliable bioassay, it requires developing highly sensitive biosensors. Among all kinds of biosensors, electrogenerated chemiluminescence (ECL) based biosensors have attracted enormous attention due to their excellent properties. In order to improve the performance of ECL biosensors, gold nanoparticles (Au NPs) have been widely utilized as signal amplification tags. The introduction of Au NPs could dramatically enhance the performance of the constructed ECL biosensors via diverse ways such as electrode modification material, efficient energy acceptor in ECL resonant energy transfer (ECL-RET), reaction catalyst, surface plasmon resonance (SPR) enhancer, and as nanocarrier. Herein, we summarize recent developments and progress of ECL biosensors based on Au NPs signal amplification strategies. We will cover ECL applications of Au NPs as a signal amplification tag in the detection of proteins, metal ions, nucleic acids, small molecules, living cells, exosomes, and cell imaging. Finally, brief summary and future outlooks of this field will be presented.

Rapid segmentation and sensitive analysis of CRP with paper-based microfluidic device using machine learning

Microfluidic paper-based analytical devices (μPADs) have been widely used in point-of-care testing owing to their simple operation, low volume of the sample required, and the lack of the need for an external force. To obtain accurate semi-quantitative or quantitative results, μPADs need to respond to the challenges posed by differences in reaction conditions. In this paper, multi-layer μPADs are fabricated by the imprinting method for the colorimetric detection of C-reactive protein (CRP). Different lighting conditions and shooting angles of scenes are simulated in image acquisition, and the detection-related performance of μPADs is improved by using a machine learning algorithm. The You Only Look Once (YOLO) model is used to identify the areas of reaction in μPADs. This model can observe an image only once to predict the objects present in it and their locations. The YOLO model trained in this study was able to identify all the reaction areas quickly without incurring any error. These reaction areas were categorized by classification algorithms to determine the risk level of CRP concentration. Multi-layer perceptron, convolutional neural network, and residual network algorithms were used for the classification tasks, where the latter yielded the highest accuracy of 96%. It has a promising application prospect in fast recognition and analysis of μPADs.

Black phosphorous quantum dots for signal-on cathodic photoelectrochemical aptasensor monoitoring amyloid β peptide

In this paper, a quantitative cathodic photoelectrochemical aptasensor is described by using black phosphorous quantum dots (BPQDs) as photoactive material and assisted by heme as electron acceptor for sensing of amyloid β peptide (Aβ). Specifically, BPQDs were synthesized by solvothermal method and characterized by various techniques. The as-prepared BPQDs were assembled on the transparent indium tin oxide electrode, and the positively charged poly-l-lysine (PLL) was then absorbed onto BPQDs via electronic interaction. Subsequently, the aptamer as the specific recognition element for Aβ oligomer was introduced on the BPQDs-PLL modified electrode. After bound with heme to form Aβ-heme complex, Aβ oligomer was simultaneously captured by the aptamer on the electrode, resulting in an enhanced photocurrent response. Under the optimized conditions, the present PEC sensor reveals a good linear response to Aβ peptide ranging from 1.0 fM to 100 nM with a detection limit of 0.87 fM. The present signal-on cathodic PEC bioassay possesses the potential to create a new paradigm in amplified PEC assays that could provide outstanding performance for bioanalysis.

Co-Quenching Effect between Lanthanum Metal-Organic Frameworks Luminophore and Crystal Violet for Enhanced Electrochemiluminescence Gene Detection

Exploring new electrochemiluminescence (ECL) luminophores to construct high-efficiency sensing systems is always a hot direction for developing ECL sensors. Compared with other luminophores, metal-organic frameworks (MOFs) exhibit high mass transfer ability for accelerating the reactivity in its pore channels, which is conducive to improving the performance of ECL sensors. In this work, La³⁺ -BTC MOFs (LaMOFs) are prepared as the highly active reactor and novel ECL luminophore. On this basis, a novel co-quenching effect mechanism is proposed based on double-stranded DNA (dsDNA) triggered cooperation between LaMOFs and crystal violet (CV) molecules. Under the confined pore channels of LaMOFs, CV can play an important role as the photon-acceptor due to the matched absorption spectrum with the ECL spectrum of LaMOFs, and the electron-acceptor on account of its lowest unoccupied molecular orbital level. Based on the proposed co-quenching effect mechanism, a constructed ECL gene sensor shows good assay performance toward p53 gene in the detection range of 1 pm to 100 nm with a detection limit of 0.33 pm. The co-quenching effect integrating LaMOFs with CV is expected to be a versatile approach in the construction of ECL gene sensor, which has good prospect in expanding the application range of ECL technology.

Novel Ratiometric Electrochemiluminescence Biosensor Based on BP-CdTe QDs with Dual Emission for Detecting MicroRNA-126

The electrochemiluminescence (ECL) ratiometric assay is usually based on two different ECL luminophores, and the choice of two suitable luminophores and shared co-reactant makes its construction challenging. The single-emitter-based ECL ratio mode could overcome the limitation of two luminophores and simplify the construction process, so it is an ideal choice. In this work, CdTe quantum dots (CdTe QDs) were modulated using black phosphorus (BP) nanosheet to simultaneously emit the cathodic and anodic ECL signals, and H₂O₂ and tripropylamine (TPrA) served as the cathodic and anodic co-reactants, respectively. MicroRNA-126 (miRNA-126) was selected as the template target to exploit the application of BP-CdTe QDs in the single-emitter-based ECL ratio detection. Through the target recycling triggering rolling-circle amplification (RCA) reaction, a large amount of glucose oxidase (GOx)-modified single strand 1 was introduced. GOx catalyzed glucose to produce H₂O₂ in situ, which acted as a dual-role moderator to quench the anodic ECL emission with TPrA as the co-reactant while enhancing the cathodic emission, thereby realizing the ratiometric detection of miRNA-126 with a low detection limit of 29 aM (S/N = 3). The dual-ECL-emitting BP-CdTe QDs with TPrA-H₂O₂ as dual co-reactant provide a superior ECL ratio platform involving enzyme catalytic reaction, expanding the application of single-emitter-based ratio sensing in the diverse biological analysis.

Cross-triggered and cascaded recycling amplification system for electrochemical detection of circulating microRNA in human serum

A cross-triggered and cascaded recycling amplification system was developed for electrochemical sensing of microRNA 122 based on the DNAzyme/multicomponent nucleic acid enzyme cleavage technique and a dumbbell-shaped probe. The linear range and detection limit were obtained to be 1 fM-100 pM and 0.34 fM, respectively. Compared with some reported studies, the proposed system can achieve the selective detection of endogenous miRNA in liver injury patients and healthy human serums with the advantages of high sensitivity, low cost, and easy manipulation, which are significant for disease diagnosis as well as the fundamental research of molecular biology.

A DNAzyme-Based Dual-Stimuli Responsive Electrochemiluminescence Resonance Energy Transfer Platform for Ultrasensitive Anatoxin-a Detection

An effective and precise electrochemiluminescence resonance energy transfer (ECL-RET), including the efficient regulation over the proximity of a donor and an acceptor and the reliable stimuli responsive as well as the avoidance of undesirable probes leakage, etc., is significant for the development of an accurate and sensitive ECL detection method; yet, the current literature in documentation involves only a limited range of such ECL-RET systems. Herein, we propose an ECL-RET strategy with dually quenched ultralow background signals and a dual-stimuli responsive, accurate signal output for the ultrasensitive and reliable detection of anatoxin-a (ATX-a). The dual quenching is accomplished by an integrated ECL-RET probe of metal organic frameworks (MOFs) encapsulated into Ru(bpy)₃²⁺ (Ru-MOF) (donor) coated with silver nanoparticles (AgNPs) shell (acceptor 1) and close proximity with DNA-ferrocene (Fc) (acceptor 2). Multistimuli responsive DNAzyme facilitated the accurate signal switch by both target ATX-a and hydrogen peroxide (H₂O₂). Because of the specific recognition of the aptamer toward ATX-a, an intricate design of the DNA sequence enabled the exposure of the Ag⁺-dependent DNAzyme sequence and H₂O₂ in situ generated Ag⁺ triggering a catalytic cleavage reaction to freely release the two ECL-RET energy acceptors, thus switching the ECL signal significantly and achieving ultrasensitive detection. It is noteworthy that AgNPs are key in this ECL-RET strategy, serving both as the gate-keepers for avoiding ECL probes leakage and also the ECL energy acceptors, and mostly importantly serving as the redox substrate for the subsequent DNAzyme catalytic signal switch. The proposed ECL-RET aptasensor for ATX-a detection displayed splendid monitoring performance with a quite low detection limit of 0.00034 mg mL^-1. This sensor not only led to the development of a dual-quenching ECL-RET system but also provided meaningful multistimuli responsive ECL biosensing platform construction, which shows a promising application prospect in complicated sample analysis.

Rational Design of Electrochemiluminescent Devices

Electrochemiluminescence (ECL) is a light-emitting process which combines the intriguing merits of both electrochemical and chemiluminescent methods. It is an extensively used method especially in clinical analysis and biological research due to its high sensitivity, wide dynamic range, and good reliability. ECL devices are critical for the development and applications of ECL. Much effort has been expended to improve the sensitivity, portability, affordability, and throughput of new ECL devices, which allow ECL to adapt broad usage scenarios.In this Account, we summarize our efforts on the recent development of ECL devices including new electrodes, ECL devices based on a wireless power transfer (WPT) technique, and novel bipolar electrochemistry. As the essential components in the ECL devices, electrodes play an important role in ECL detection. We have significantly improved the sensitivity of luminol ECL detection of H₂O₂ by using a stainless steel electrode. By using semiconductor materials (e.g., silicon and BiVO₄), we have exploited photoinduced ECL to generate intense emission at much lower potentials upon illumination. For convenience, portability, and disposability, ECL devices based on cheap WPT devices have been designed. A small diode has been employed to rectify alternating current into direct current to dramatically enhance ECL intensity, enabling sensitive ECL detection using a smart phone as a detector. Finally, we have developed several ECL devices based on bipolar electrochemistry in view of the convenience of multiplex ECL sensing using a bipolar electrode (BPE). On the basis of the wireless feature of BPE, we have employed movable BPEs (e.g., BPE swimmers and magnetic rotating BPE) for deep exploration of the motional and ECL properties of dynamic BPE systems. To make full use of the ECL solution, we have dispersed numerous micro-/nano-BPEs in solution to produce intense 3D ECL in the entire solution, instead of 2D ECL in conventional ECL devices. In addition, the interference of ECL noise from driving electrodes was minimized by introducing the stainless steel with a passivation layer as the driving electrode. To eliminate the need for the fabrication of electrode arrays and the interference from the driving electrode and to decrease the applied voltage, we develop a new-type BPE device consisting of a single-electrode electrochemical system (SEES) based on a resistance-induced potential difference. The SEES is fabricated easily by attaching a multiperforated plate to a single film electrode. It enables the simultaneous detection of many samples and analytes using only a single film electrode (e.g., screen-printed electrode) instead of electrode arrays. It is of great potential in clinical analysis especially for multiple-biomarker detection, drug screening, and biological studies. Looking forward, we believe that more ECL devices and related ECL materials and detection methods will be developed for a wide range of applications, such as in vitro diagnosis, point-of-care testing, high-throughput analysis, drug screening, biological study, and mechanism investigation.

MXene and black phosphorus based 2D nanomaterials in bioimaging and biosensing: progress and perspectives

Bioimaging and biosensing have garnered interest in early cancer diagnosis due to the ability of gaining in-depth insights into cellular functions and providing a wide range of diagnostic parameters. Emerging 2D materials of multielement MXenes and monoelement black phosphorous nanosheets (BPNSs) with unique intrinsic physicochemical properties such as a tunable bandgap and layer-dependent fluorescence, high carrier mobility and transport anisotropy, efficient fluorescence quenching capability, desirable light absorption and thermoelastic properties, and excellent biocompatibility and biosafety properties provide promising nano-platforms for bioimaging and biosensing applications. In view of the growing attention on the rising stars of the post-graphene age in the progress of bioimaging and biosensing, and their common feature characteristics as well as complementarity for constructing complexes, the main objective of this review is to reveal the recent advances in the design of MXene or BPNS based nanoplatforms in the field of bioimaging and biosensing. The preparation and surface functionalization methods, biosafety, and other important aspects of bioimaging and biosensing applications of MXenes and BPNSs have been assessed systematically, along with highlighting the main challenges in further biomedical application. The review not only focuses on the advancements in 2D materials for use in bioimaging and biosensing but also assesses the possibility of their future potential in bioapplications.

Recent advances in lab-on-paper diagnostic devices using blood samples

Lab-on-paper, or microfluidic paper-based analytical devices (μPADs), use paper as a substrate material, and are patterned with a system of microchannels, reaction zones and sensing elements to perform analysis and detection. The sample transfer in such devices is performed by capillary action. As a result, external driving forces are not required, and hence the size and cost of the device are significantly reduced. Lab-on-paper devices have thus attracted significant attention for point-of-care medical diagnostic purposes in recent years, particularly in less-developed regions of the world lacking medical resources and infrastructures. This review discusses the major advances in lab-on-paper technology for blood analysis and diagnosis in the past five years. The review focuses particularly on the many clinical applications of lab-on-paper devices, including diabetes diagnosis, acute myocardial infarction (AMI) detection, kidney function diagnosis, liver function diagnosis, cholesterol and triglyceride (TG) analysis, sickle-cell disease (SCD) and phenylketonuria (PKU) analysis, virus analysis, C-reactive protein (CRP) analysis, blood ion analysis, cancer factor analysis, and drug analysis. The review commences by introducing the basic transmission principles, fabrication methods, structural characteristics, detection techniques, and sample pretreatment process of modern lab-on-paper devices. A comprehensive review of the most recent applications of lab-on-paper devices to the diagnosis of common human diseases using blood samples is then presented. The review concludes with a brief summary of the main challenges and opportunities facing the lab-on-paper technology field in the coming years.

Recent advances in black phosphorus-based electrochemical sensors: A review

Since the discovery of liquid-phase-exfoliated black phosphorus (BP) as a field-effect transistor in 2014, BP, with its 2D layered structure, has attracted significant attention, owing to its anisotropic electroconductivity, tunable direct bandgap, extraordinary surface activity, moderate switching ratio, high hole mobility, good biocompatibility, and biodegradability. Several pioneering research efforts have explored the application of BP in different types of electrochemical sensors. This review summarizes the latest synthesis methods, protection strategies, and electrochemical sensing applications of BP and its derivatives. The typical synthesis methods for BP-based crystals, nanosheets, and quantum dots are discussed in detail; the degradation of BP under ambient conditions is introduced; and state-of-the-art protection methodologies for enhancing BP stability are explored. Various electrochemical sensing applications, including chemically modified electrodes, electrochemiluminescence sensors, enzyme electrodes, electrochemical aptasensors, electrochemical immunosensors, and ion-selective electrodes are discussed in detail, along with the mechanisms of BP functionalization, sensing strategies, and sensing properties. Finally, the major challenges in this field are outlined and future research avenues for BP-based electrochemical sensors are highlighted.

Strategies for the detection of target analytes using microfluidic paper-based analytical devices

Microfluidic paper-based analytical devices (μPADs) have developed rapidly in recent years, because of their advantages, such as small sample volume, rapid detection rates, low cost, and portability. Due to these characteristics, they can be used for in vitro diagnostics in the laboratory, or in the field, for a variety of applications, including food evaluation, disease screening, environmental monitoring, and drug testing. This review will present various detection methods employed by μPADs and their respective applications for the detection of target analytes. These include colorimetry, electrochemistry, chemiluminescence (CL), electrochemiluminescence (ECL), and fluorescence-based methodologies. At the same time, the choice of labeling material and the design of microfluidic channels are also important for detection results. The construction of novel nanocomponents and different smart structures of paper-based devices have improved the performance of μPADs and we will also highlight some of these in this manuscript. Additionally, some key challenges and future prospects for the use of μPADs are briefly discussed.