Zirconium–Metalloporphyrin Frameworks–Luminol Competitive Electrochemiluminescence for Ratiometric Detection of Polynucleotide Kinase Activity

Novel electrochemiluminescence sensing platform for ultrasensitive detection of malathion residue in tea based on SiO2NSs doped Luminol/AgNPs as a signal amplification strategy

To address the potential hazards of organophosphorus pesticides (OPs) residues in tea, an electrochemiluminescence (ECL) aptasensor based on functionalized nanomaterials was constructed in this work. Firstly, gold nanoparticles (AuNPs) were attached on the surface of multi-walled carbon nanotubes (MWCNTs) by the constant potential electrodeposition to form a compound, and it was utilized to provide excellent immobilization sites for complementary DNA (cDNA). Subsequently, composite nanomaterials were synthesized by a one-pot method with aminated Luminol/silver nanoparticles@silica nanospheres (NH2-Luminol/Ag@SiO2NSs). Finally, NH2-Luminol/Ag@SiO2NSs was combined with a malathion aptamer (Apt) to obtain signal probes (SPs) for the construction of an aptasensor. The aptasensor had a wide linear range (1×10-3-1×103 ng/mL) and a low limit of detection (LOD) (0.3×10-3 ng/mL). It had the virtues of high sensitivity, wonderful stability and excellent specificity, which could be used for the detection of malathion residue in tea. The work provides a proven way for the construction of a rapid and ultrasensitive aptasensor with low-cost.

Construction of self-enhanced luminescence probes based on Ti3C2 reducibility for ultrasensitive PNK analysis

Au nano-clusters (Au NCs) were promising electrochemiluminescence (ECL) nano-materials. However, the small size of Au NCs presented a challenge in terms of their immobilization during the construction of an ECL biosensing platform. This limitation significantly hindered the wider application of Au NCs in the ECL field. In this work, we successfully used the reducibility of Ti3C2 to fabricate in situ a self-enhanced nano-probe Ti3C2-TiO2-Au NCs. The strategy of in situ generation not only improved the immobilization of Au NCs on the probe but also eliminated the requirement of adding reducing agents during preparation. In addition, in situ generated TiO2 could serve as a co-reaction accelerator, shortening the electron transfer distance between S2O82- and Au NCs, thereby improving the utilization of intermediates and enhancing the ECL response of Au NCs. The constructed ECL sensing platform could achieve sensitive detection of polynucleotide kinase (PNK). At the same time, the 5'-end phosphate group of DNA phosphorylation could chelate with a large amount of Ti on the surface of Ti3C2, thereby achieving the goal of specific detection of PNK. The sensor based on self-enhanced ECL probes had a broad dynamic range spanning for PNK detection from 10.0 to 1.0 × 107 μU mL-1, with a limit of detection of 1.6 μU mL-1. Moreover, the ECL sensor showed satisfactory detection performance in HeLa cell lysate and serum. This study not only provided insights for addressing the issue of ECL luminescence efficiency in Au NCs but also presented novel concepts for ECL self-enhancement strategies.

Ultrastable Luminol-OH--(Ni-WOx-CNT) ECL System with High Strength and Its Applications in Sensing

In traditional luminol electrochemiluminescence (ECL) systems, hydrogen peroxide (H2O2) and dissolved oxygen (DO) are the commonly used coreactants to generate reactive oxygen species (ROS) for ECL emission. However, the self-decomposition of hydrogen peroxide and the limited solubility and content of oxygen in solution undoubtedly restrict the luminescence efficiency and stability of the luminol ECL system. Inspired by the ROS-mediated ECL mechanism, we pioneered hydroxide ion as an advanced luminol ECL coreactant using nickel-doped and carbon nanotube-modified tungsten oxide (Ni-WOx-CNT) as the coreactant accelerator. Owing to the excellent catalytic activity of Ni-WOx-CNT, amounts of ROS were generated from OH- at a low excitation voltage, which subsequently reacted with luminol anion radicals and triggered intense ECL signals. Experiments confirmed an impressive ECL behavior in terms of high luminescent intensity (85,563 a.u.) and super stability over 1300 consecutive tests; both are superior to those recently reported luminol-H2O2 and luminol-DO systems with smaller ECL intensities and consecutive tests less than 25 times. To validate the feasibility and versatility of the developed system in sensor, traditional three-electrodes system and closed bipolar electrodes system with various sensing strategies of direct oxidation, "gate-effect" of molecularly imprinted polymer, immune reaction, and enzyme-catalyzed reaction were proposed to monitor uric acid (UA), C-reactive protein (CRP), immunoglobulin G (IgG), and glucose (Glu). The superior sensing performances confirmed the great application potential of the developed ROS-mediated ECL system.

Fine tuning of porphyrin based-paddlewheel framework by imidazole derivative to boost electrochemiluminescence performance

Precise tuning the structure of catalytic center is of great importance for the construction of enhanced electrochemiluminescence (ECL) emitters and the development of ECL amplification strategies, which is a key factor in improving the sensitivity of biosensors. In this work, we report the enhanced ECL emitters based on the porphyrin-based paddlewheel framework (PPF) with axial coordinated imidazole-like ligands (PPF/X, X = 2-methylimidazole (MeIm), imidazole (Im), benzimidazole (BIM)). In this system, the electron-donating ability of the axial ligands is positively correlated to its coordination ability to the paddlewheel units and the catalytic ability of the axially coordinated paddlewheel units. In addition, the electrochemical and ECL behavior of PPF/X (X = MeIm, Im, BIM) with different axial coordinated ligands are explored.

Zinc porphyrin/MXene hybrids with phosphate-induced stimuli-responsive behavior for dual-mode fluorescent/electrochemiluminescent ratiometric biosensing

Highly sensitive ratiometric biosensors have attracted much attention in biomarker detection, but most rely on single-mode signals, which can affect accuracy. The development of new principles and methods for dual-mode ratiometric sensing can enhance detection accuracy. Herein, the zinc(II) meso-tetra(4-carboxyphenyl) porphyrin/MXene (ZnTCPP/Ti3C2Tx) hybrids with phosphate-induced stimuli-responsive behavior are used to develop a novel dual-mode fluorescent/electrochemiluminescent (FL/ECL) ratiometric biosensor. The composites exhibit FL quenching and enhanced ECL behavior involving dissolved O2. The FL quenching of ZnTCPP/Ti3C2Tx is caused by energy transfer (EnT) and photo-induced electron transfer (PET) from ZnTCPP to Ti3C2Tx. While the introduction of MXene compensates for the inadequate conductivity of ZnTCPP, facilitating electron transfer, which further makes the surface ZnTCPP more capable of activating O2 to produce singlet oxygen (1O2), thereby generating enhanced cathodic ECL. Furthermore, phosphate ions (PO43-) can interact with the Ti sites of ZnTCPP/Ti3C2Tx, leading to competition for coordination with ZnTCPP, which in turn detaches ZnTCPP, resulting in enhanced FL and reduced ECL. On the basis of the phosphate-induced stimuli-responsive behavior, the dual-mode FL/ECL ratiometric biosensing of alkaline phosphatase (ALP) is achieved through ALP-catalyzed production of PO43- cascade effect with ZnTCPP/Ti3C2Tx. The linear detection range for ALP is 0.1-50 mU/mL, with a detection limit as low as 0.0083 mU/mL. This proposed ZnTCPP/Ti3C2Tx composites with stimuli-responsive behavior is expected to provide new ideas for the development of high-sensitivity dual-mode ratiometric biosensors with promising applications in the precise detection of important biomarkers.

Potential-Resolved Ratiometric Aptasensor for Sensitive Acetamiprid Analysis Based on Coreactant-free Electrochemiluminescence Luminophores of Gd-MOF and "Light Switch" Molecule of [Ru(bpy)2dppz]2

For conventional potential-resolved ratiometric electrochemiluminescence (ECL) systems, the introduction of multiplex coreactants is imperative. However, the undesirable interactions between different coreactants inevitably affect analytical accuracy and sensitivity. Herein, through the coordination of aggregation-induced emission ligands with gadolinium cations, the self-luminescent metal-organic framework (Gd-MOF) is prepared and serves as a novel coreactant-free anodic ECL emitter. By the intercalation of [Ru(bpy)2dppz]2+ with light switch effect into DNA duplex, one high-efficiency cathodic ECL probe is obtained using K2S2O8 as a coreactant. In the presence of acetamiprid, the strong affinity between the target and its aptamer induces the release of [Ru(bpy)2dppz]2+, resulting in a decreasing cathode signal and an increasing anode signal owing to the ECL resonance energy transfer from Gd-MOF to [Ru(bpy)2dppz]2+. In this way, an efficient dual-signal ECL aptasensor is constructed for the ratiometric analysis of acetamiprid, exhibiting a remarkably low detection limit of 0.033 pM. Strikingly, by using only one exogenous coreactant, the cross interference from multiple coreactants can be eliminated, thus improving the detection accuracy. The developed high-performance ECL sensing platform is successfully applied to monitor the residual level of acetamiprid in real samples, demonstrating its potential application in the field of food security.

Exogenous Co-Reactant-Free Electrochemiluminescent Biosensor for Ratiometric Measurement of α-Glucosidase Based on a ZIF-67-Regulated Hydrogen-Bonded Organic Framework

The development of highly sensitive and selective analytical approaches for monitoring enzymatic activity is critical for disease diagnosis and biomedical research. Herein, we develop an exogenous co-reactant-free electrochemiluminescence (ECL) biosensor for the ratiometric measurement of α-glucosidase (α-Glu) based on a zeolitic imidazolate framework (ZIF-67)-regulated pyrene-based hydrogen-bonded organic framework (HOF-101). Target α-Glu can hydrolyze maltose to α-d-glucose, which can subsequently react with GOx to produce gluconic acid. The resultant gluconic acid can dissolve ZIF-67, leading to the recovery of the HOF-101 cathodic ECL signal and the decrease of the luminol anodic ECL signal. The long-range ordered structure of HOF-101 can speed up charge transfer, resulting in a stable and strong cathodic ECL signal. Moreover, ZIF-67 can not only efficiently quench the ECL signal of HOF-101 due to ECL resonance energy transfer between HOF-101 and ZIF-67 as well as the steric hindrance effect of ZIF-67 but also enhance the anodic ECL emission of luminol in dissolved O2 system because of its ordered and porous crystalline structure and the atomically dispersed Co2+. Notably, HOF-101 possesses a higher ECL efficiency (32.22%) compared with the Ru(bpy)32+ standard. Importantly, this ratiometric ECL biosensor shows high sensitivity (a detection limit of 0.19 U L-1) and a broad linear range (0.2-50 U L-1). This biosensor can efficiently eliminate systematic errors and enhance detection reliability without the involvement of exogenous co-reactants, and it displays good assay performance in human serum samples, holding great promise in biomedical research studies.

An electrochemical biosensor for T4 polynucleotide kinase activity assay based on host-guest recognition between phosphate pillar[5]arene@MWCNTs and thionine

T4 polynucleotide kinase helps with DNA recombination and repair. In this study, an electrochemical biosensor was developed for a T4 polynucleotide kinase activity assay and inhibitor screening based on phosphate pillar[5]arene and multi-walled carbon nanotube nanocomposites. The water-soluble pillar[5]arene was employed as the host to complex thionine guest molecules. The substrate DNA with a 5'-hydroxyl group initially self-assembled on the gold electrode surface through chemical adsorption of the thiol group, which was phosphorylated in the presence of T4 polynucleotide kinase. Titanium dioxide nanoparticles served as a bridge to link phosphorylated DNA and phosphate pillar[5]arene and multi-walled carbon nanotube composite due to strong phosphate-Ti4+-phosphate chemistry. Through supramolecular host-guest recognition, thionine molecules were able to penetrate the pillar[5]arene cavity, resulting in an enhanced electrochemical response signal. The electrochemical signal is proportional to the T4 polynucleotide kinase concentration in the range of 10-5 to 15 U mL-1 with a detection limit of 5 × 10-6 U mL-1. It was also effective in measuring HeLa cell lysate-related T4 polynucleotide kinase activity and inhibitor screening. The proposed method offers a unique sensing platform for kinase activity measurement, holding great potential in nucleotide kinase-target drug development, clinical diagnostics, and inhibitor screening.

Large-scale assembly of geometrically diverse metal nanoparticles-based 3D plasmonic DNA nanostructures for SERS detection of PNK in cancer cells

The organization of geometrically diverse metal nanoparticles into a core/satellite structure at a large scale is a promising strategy for improve SERS performance due to hot spots localized enrichment and signal increase. However, due to the lack of extensional frames and strong electrostatic repulsion between plasma NPs, the fabrication of such 3D architectures with a high-density periodic hotspot in the focus volume has proven exceedingly difficult. Herein, we demonstrate a facile large-scale assembly of geometrically diverse metal nanoparticles strategy for constructing spatially extended 3D plasmonic nanostructures resembling "signal towers" based on RCA-mediated periodic organization of gold nanospheres (GNS) surrounding gold nanorods (GNRs). Using cancer cell T4 PNK as a model, a padlock probe with 5'- hydroxyl (P-circle) was designed as the T4 PNK substrate. The center Au nanorod was coated with P1 and served as a "pedestal" to allow substantial loading of P-circle after target phosphorylation to initiate the rolling ring amplification reaction (RCA). The resultant DNA nanowire serves as an "antenna" to successively lock numerous Raman reporter P2 (Cy3-P2-SH) through base pairing at regular intervals. Finally, the 3D plasma DNA nanostructures that resemble "signal towers" could be obtained by placing a large number of GNS with a strong affinity for Au-S. The proposed 3D SERS sensor exhibited a sensitivity of LOD as low as 0.274 mU/mL, which was attributed to a substantial electromagnetic field enhancement at the inter-nanoparticle gaps between the adjacent pedestal and antenna. Moreover, by exploiting the synergistic effect of the periodically extended DNA scaffold generated by RCA amplification and the co-assembly of thiol ligand, the loaded GNS can be extended to three-dimensional space, forming a high-density periodic hotspot in the focal volume, thereby ensuring high enhancement and high reproducibility of Raman signals. In addition, this method can be used to quantify T4 PNK in HeLa cells, demonstrating its applicability in diagnosing and estimating PNK-related diseases in complex fluids.

Nanofluidic sensing platform for PNK assay using nonlinear hybridization chain reaction and its application in DNA logic circuit

In this study, a polyethyleneimine (PEI)/Zr4+-functionalized nanofluidic sensing platform based on nonlinear hybridization chain reaction (NHCR) was developed for PNK activity assay. With the existence of PNK, the hairpin HPNK was cleaved by λ exonuclease, liberating the initiator T-DNA. Then T-DNA triggered the nonlinear HCR in solution and the reaction products were absorbed onto the nanopore, which changed the surface charge of nanofluidic device and could be detected by current-voltage characteristic curves. Compared to traditional linear HCR, the nonlinear HCR exhibits a higher sensitivity and order of growth kinetics, making it a powerful signal amplifier in bioanalysis. Due to the powerful amplification efficiency of nonlinear HCR, high sensitivity of the nanopore and specific recognition site of PNK/λ-Exo, an ultrasensitive and selective PNK sensing approach had been developed and applied to precisely quantitate the PNK activity with a LOD of 0.0001 U/mL. Moreover, utilizing this nanofluidic system as a foundation, we constructed a logic circuit that utilized PNK, adenosine diphosphate (ADP), and (NH4)2SO4 as input elements. ADP and (NH4)2SO4 had a crucial function in facilitating the PNK to regulate the DNA logic gate. By modifying the target and inhibitors, the nanofluidic device could detect a variety of stimuli and execute more advanced logical operations.

Progress in quantum dot-based biosensors for microRNA assay: A review

MicroRNAs (miRNAs) are responsible for post-transcriptional gene regulation, and may function as valuable biomarkers for diseases diagnosis. Accurate and sensitive analysis of miRNAs is in great demand. Quantum dots (QDs) are semiconductor nanomaterials with superior optoelectronic features, such as high quantum yield and brightness, broad absorption and narrow emission, long fluorescence lifetime, and good photostability. Herein, we give a comprehensive review about QD-based biosensors for miRNA assay. Different QD-based biosensors for miRNA assay are classified by the signal types including fluorescent, electrochemical, electrochemiluminescent, and photoelectrochemical outputs. We highlight the features, principles, and performances of the emerging miRNA biosensors, and emphasize the challenges and perspectives in this field.

Coreactant-free dual-emitting conjugated polymer for ratiometric electrochemiluminescence detection of SARS-CoV-2 RdRp gene

Constructing mono-luminophor-based electrochemiluminescence (ECL) ratio system is a great challenge due to the limitations of the luminescent species with dual-signal-output, luminescence efficiency and coreactant. This work developed carboxyl-functionalized poly[9,9-bis(3'-(N,N-dimethylamino) propyl)-2,7-fluorene]-alt-2,7-(9,9 dioctylfluorene)] nanoparticles(PFN NPs) as dual-emitting luminophors, which can synchronously output strong cathodic and anodic ECL signals without any exogenous coreactants. The inherent molecular structure enabled efficient intramolecular electron transfer between tertiary amine groups and backbone of PFN to generate strong cathodic and anodic ECL emission. Particularly, H+ in aqueous solution played an irreplaceable role for cathodic ECL emission. The silver nanoparticles (AgNPs) were developed as signal regulator because of their excellent hydrogen evolution reaction (HER) activity, which significantly quenched the cathodic signal while kept the anodic signal unchanged. The dual-emitting PFN NPs cleverly integrated signal regulator AgNPs and bicyclic strand displacement amplification (SDA) to construct a coreactant-free mono-luminophor-based ratiometric ECL sensing for SARS-CoV-2 RdRp gene assay. The strong dual-emitting of PFN NPs and excellent quenching effect of AgNPs on cathodic emission endowed the biosensor with a high detection sensitivity, and the detection limit was as low as 39 aM for RdRp gene. The unique dual-emitting properties of PFN NPs open up a new path to construct coreactant-free mono-luminophor-based ECL ratio platform, and excellent HER activity of AgNPs offers some new thoughts for realizing ECL signal changes.

A high-performance fluorescent and ratiometric colorimetric detection of Cu2+ in practice

To monitor Cu2+ efficiently, a kind of D-π-A-π-D conjugated 3,5-di-(2-hydroxyl naphthaldehyde)-iminyl triazole (HNIT) was developed, using triazole as the electron acceptor, 2-hydroxyl naphthaline as the electron donor, and -CN- as the bridging group. The proposed HNIT possessed superior UV-vis and fluorescent spectral property with high molar absorption coefficient of 2.313 × 104 L mol-1 cm-1 and fluorescence quantum yield of 36.2%. Trace Cu2+ could exclusively alter its UV-vis and fluorescent property with clear color change. Under the optimized conditions, a high-performance fluorescent and ratiometric colorimetric detection of Cu2+ based on HNIT was efficient, with low detection limits of 3.3 × 10-8 mol L-1 (S/N = 3) and 9.6 × 10-8 mol L-1 (S/N = 3), respectively. It well satisfied with the safe value of 31.5 μM Cu2+ in drinking water recommended by World Health Organization (WHO). When applied for detection of Cu2+ in real environmental samples, the recovery was in the range of 97.5-105.2%. The recognition mechanism for HNIT to Cu2+ realized quite stable 6-membered rings between electron-deficient Cu2+ and electron-rich N and O atoms in HNIT with 1 : 2 chemical stoichiometry of HNIT to Cu2+.

An electrochemical biosensor for T4 polynucleotide kinase activity identification according to host-guest recognition among phosphate pillar[5]arene@palladium nanoparticles@reduced graphene oxide nanocomposite and toluidine blue

T4 polynucleotide kinase (T4 PNK) helps with DNA recombination and repair. In this work, a phosphate pillar[5]arene@palladium nanoparticles@reduced graphene oxide nanocomposite (PP5@PdNPs@rGO)-based electrochemical biosensor was created to identify T4 PNK activities. The PP5 used to complex toluidine blue (TB) guest molecules is water-soluble. With T4 PNK and ATP, the substrate DNA, which included a 5'-hydroxyl group, initially self-assembled over the gold electrode surface by chemical adsorption of the thiol units. Strong phosphate-Zr4+-phosphate chemistry allowed Zr4+ to act as a bridge between phosphorylated DNA and PP5@PdNPs@rGO. Through a supramolecular host-guest recognition connection, TB molecules were able to penetrate the PP5 cavity, where they produced a stronger electrochemical response. With a 5 × 10-7 U mL-1 detection limit, the electrochemical signal is linear in the 10-6 to 1 U mL-1 T4 PNK concentration range. It was also effective in measuring HeLa cell lysate-related PNK activities and screening PNK inhibitors. Nucleotide kinase-target drug development, clinical diagnostics, and screening for inhibitors all stand to benefit greatly from the suggested technology, which offers a unique sensing mechanism for kinase activity measurement.

A multifunctional electrochemiluminescence and photoelectrochemical biosensor based on a quantum dot ion-exchange reaction for two-channel detection of thrombin

Herein, a multifunctional electrochemiluminescence (ECL) and photoelectrochemical (PEC) biosensor based on exchange of Ag+ with CdTe QDs was developed for dual-mode detection of thrombin. First, CdTe QDs assembled on an electrode displayed superior ECL and PEC signals. At the same time, C-rich hairpin (HP) DNA linked to silicon spheres loaded a large amount of Ag+, and the specific binding of thrombin to an aptamer led to the release of DNA P; then, DNA P interacted with HP DNA to produce numerous Ag+ ions by an enzyme-digestion amplification reaction. Ag+ underwent ion exchange with CdTe QDs to generate AgTe/CdTe QDs, resulting in much reversed PEC and changed ECL signals for dual-mode detection of thrombin. This work takes advantage of outstanding multi-signals of QDs coupled with convenient ion exchange to achieve multi-mode detection of the target, avoiding false positive or false negative signals generated in the traditional detection process, and thus can be used for the rapid detection of various biomolecules in actual samples.

Organic-Inorganic Porphyrinoid Frameworks for Biomolecule Sensing

Porphyrinoids and their analogous compounds play an important role in biosensing applications on account of their unique and versatile catalytic, coordination, photophysical, and electrochemical properties. Their remarkable arrays of properties can be finely tuned by synthetically modifying the porphyrinoid ring and varying the various structural parameters such as peripheral functionalization, metal coordination, and covalent or physical conjugation with other organic or inorganic scaffolds such as nanoparticles, metal-organic frameworks, and polymers. Porphyrinoids and their organic-inorganic conjugates are not only used as responsive materials but also utilized for the immobilization and embedding of biomolecules for applications in wearable devices, fast sensing devices, and other functional materials. The present review delineates the impact of different porphyrinoid conjugates on their physicochemical properties and their specificity as biosensors in a range of applications. The newest porphyrinoid types and their synthesis, modification, and functionalization are presented along with their advantages and performance improvements.

Recent progress in assembly strategies of nanomaterials-based ultrasensitive electrochemiluminescence biosensors for food safety and disease diagnosis

The Electrochemiluminescence (ECL)-based biosensors have received considerable attention in food contaminants and disease diagnosis, due to their fascinating advantages such as low cost, fast analysis speed, wide linear range, high sensitivity, and excellent anti-interference ability. Meanwhile, with the vigorous development and improvement of nanotechnology, biosensor assembly strategies tend to diversify and be multifunctional. This review focuses on the representative ECL biosensors in food safety and disease diagnosis reported by our research group and other research groups based on nanomaterials assembly strategies in recent years. According to the different roles of nanomaterials played in the constitution of ECL biosensors, nanomaterials would be divided into the following two categories to be summarized: (1) Nanomaterials for signal amplification. (2) Nanomaterials as ECL emitters. Finally, this review prospects the perspectives on the future development direction of ECL biosensor in food safety and disease diagnosis.

High-Intensity Focused Ultrasound Combined with Ti3C2-TiO2 to Enhance Electrochemiluminescence of Luminol for the Sensitive Detection of Polynucleotide Kinase

Luminol is a classic electrochemiluminescence (ECL) luminophore. The luminol-O₂ ECL system suffers from a problem, that is, the conversion rate of dissolved O₂ into reactive oxygen species (ROS) is low. In this work, we used high-intensity focused ultrasound (HIFU) pretreatment combined with Ti₃C₂-TiO₂ to construct a highly sensitive luminol-O₂ ECL system for the specific detection of polynucleotide kinase (PNK) first. On the one hand, HIFU generated ROS in situ as a coreactant via the cavitation effect to boost the luminol emission. On the other hand, Ti₃C₂-TiO₂ was prepared in situ via Ti₃C₂ as a reducing agent, and it can aggregate and catalyze ROS generated in situ by HIFU. Moreover, the Ti on the Ti₃C₂-TiO₂ surface could bind to phosphate groups through chelation, thereby realizing highly specific detection of PNK. The sensor has a linear relationship range of 1.0 × 10^-5 to 10.0 U mL^-1, and the limit of detection is 1.48 × 10^-7 U mL^-1, which is superior to most existing methods. The sensor performance in HeLa cell lysate was measured with a satisfactory result. The designed ECL biosensor has potential applications in biological analysis and clinical diagnosis.

PEGylated Ni Single-Atom Catalysts as Ultrasensitive Electrochemiluminescent Probes with Favorable Aqueous Dispersibility for Assaying Drug-Resistant Pathogens

Ni single-atom catalysts (SACs) were synthesized by high-temperature calcination of nickel ions and 1,10-phenanthroline on carbon black as a carrier. Benefiting from the ultrahigh atom utilization efficiency, Ni SACs can significantly accelerate decay of dissolved oxygen to generate abundant reactive oxygen species through an oxygen reduction reaction occurring on cathodes. The generated reactive oxygen species can vastly enhance the electrochemiluminescent (ECL) signal of luminol without participation of exogenous co-reactants. To overcome the inherent unfavorable aqueous dispersibility of Ni SACs prepared by the calcination protocol, they were functionalized with highly hydrophilic PEG 2000. Thanks to the abundant carboxyl groups on PEG 2000, the PEGylated Ni SACs (Ni@PEG) can be used as ECL probes to tag biorecognition molecules. In this proof-of-principle work, an ECL biosensor for assaying methicillin-resistant Staphylococcus aureus was developed by using porcine IgG as capture molecule and phage cell-binding domain tagged with Ni@PEG as signal tracer. It shows a broad linear range of 73-7.3 × 10⁶ CFU/mL and a low detection limit of 25 CFU/mL. The recovery values for assaying spiked samples are between 80.8 and 119.2%. It was also utilized to assess MRSA susceptibility to four antibiotics, with results consistent with those obtained by the standard broth microdilution technique. To the best of our knowledge, it is the first time to utilize aqueous dispersible SACs as highly sensitive ECL probes for developing biosensors.

Sensitive Autocatalytic Hybridization Circuit for Reliable In Situ Intracellular Polynucleotide Kinase Imaging

Exploring the characteristic functions of polynucleotide kinase (PNK) could substantially promote the elucidation of PNK-related mechanistic pathways. Yet, the sensitive and reliable detection of intracellular PNK still presents a challenging goal. Herein, we propose a simple autocatalytic hybridization circuit (AHC) for in situ intracellular imaging of PNK with high reliability. The AHC amplifier consists of two mutually activated hybridization chain reaction (HCR) modules for magnified signal transduction. The PNK is transduced into initiator I by phosphorylation and cleavage of mediator H_p. Initiator I activates the initial HCR-1 module, leading to the formation of long dsDNA nanowires that carry numerous initiator T. Then, T-initiated feedback HCR-2 module generates branched products that contain plentiful initiator I, thus realizing an autocatalytic HCR amplification reaction. Simultaneously, the HCR-2 module is also assembled as a versatile signal transduction unit for generating the amplified readout. Based on the mutually sustained accumulation of two initiators for the reciprocal activation of two reaction modules, continuous signal amplification and assembly of high-molecular-weight copolymers endow the AHC system with high sensitivity and robustness for the PNK assay. Moreover, the PNK-sensing AHC system achieves reliable imaging of intracellular PNK, thus showing great potential to decipher the correlation between PNK and related diseases.

A label-free T4 polynucleotide kinase fluorescence sensor based on split dimeric G-quadruplex and ligation-induced dimeric G-quadruplex/thioflavin T conformation

The phosphorylation process of DNA by T4 polynucleotide kinase (T4 PNK) plays a crucial role in DNA recombination, DNA replication, and DNA repair. Traditional monomeric G-quadruplex (G4) systems are always activated by single cation such as K⁺ or Na⁺. The conformation transformation caused by the coexistence of multiple cations may interfere with the signal readout and limit their applications in physiological system. In view of the stability of dimeric G4 in multiple cation solution, we reported a label-free T4 PNK fluorescence sensor based on split dimeric G4 and ligation-induced dimeric G4/thioflavin T (ThT) conformation. The dimeric G4 was divided into two independent pieces of one normal monomeric G4 and the other monomeric G4 fragment phosphorylated by T4 PNK in order to decrease the background signal. With the introduction of template DNA, DNA ligase, and invasive DNA, the dimeric G4 could be generated and liberated to combine with ThT to show obvious fluorescence signal. Using our strategy, the linear range from 0.005 to 0.5 U mL^-1, and the detection limit of 0.0021 U mL^-1 could be achieved without the consideration of interference caused by the coexistence of multiple cations. Additionally, research in real sample determination and inhibition effect investigations indicated its further potential application value in biochemical process research and clinic diagnostics.

Biosensor Based on Covalent Organic Framework Immobilized Acetylcholinesterase for Ratiometric Detection of Carbaryl

A ratiometric electrochemical biosensor based on a covalent organic framework (COF_Thi-TFPB) loaded with acetylcholinesterase (AChE) was developed. First, an electroactive COF_Thi-TFPB with a two-dimensional sheet structure, positive charge and a pair of inert redox peaks was synthesized via a dehydration condensation reaction between positively charged thionine (Thi) and 1,3,5-triformylphenylbenzene (TFPB). The immobilization of AChE on the positively charged electrode surface was beneficial for maintaining its bioactivity and achieving the best catalytic effect; therefore, the positively charged COF_Thi-TFPB was an appropriate support material for AChE. Furthermore, the COF_Thi-TFPB provided a stable internal reference signal for the constructed AChE inhibition-based electrochemical biosensor to eliminate various effects which were unrelated to the detection of carbaryl. The sensor had a linear range of 2.2–60 μM with a detection limit of 0.22 μM, and exhibited satisfactory reproducibility, stability and anti-interference ability for the detection of carbaryl. This work offers a possibility for the application of COF-based materials in the detection of low-level pesticide residues.

Self-enhanced electrochemiluminescence of luminol induced by palladium-graphene oxide for ultrasensitive detection of aflatoxin B1 in food samples

In this work, a novel and credible electrochemiluminescence immunoassay (ECLIA) was constructed for the ultrasensitive and highly selective detection of aflatoxin B₁ (AFB₁). Amino-functionalized 3D graphene hydrogel (NGH) served as the ECL platform with the self-enhanced ECL of luminol-palladium-graphene oxide (lum-Pd-GO) acting as a marker for the antibodies against AFB₁. Pd-GO was synthesized by a self-redox method; it promotes the formation of reactive oxygen species, which are important to the ECL of luminol, from dissolved oxygen. The π-π conjunction between luminol and GO shortens their electron transfer distance, resulting in an amplified ECL signal (∼8.5 times larger than conventional luminol ECL). Moreover, 3D NGH, with its good conductivity, large surface area, and sufficient amino groups, was used to anchor gold nanoparticles (AuNPs), which subsequently immobilized bovine serum albumin (BSA)-AFB₁ through Au-S bonds. The resultant, competitive ECLIA gave a relative low detection limit of 5 × 10^-3 μg kg^-1 and exhibited a broad linear relationship over the range of 0.05-50 μg kg^-1. Finally, the proposed ECLIA was successfully used to analyze AFB₁ contents in food samples. ECLIA: electrochemiluminescence immunoassay; AFs: Aflatoxins; HPLC: high-performance liquid chromatography.

Magnetic zirconium-based Prussian blue analog nanozyme: enhanced peroxidase-mimicking activity and colorimetric sensing of phosphate ion

A magnetic zirconium hexacyanoferrate-based Prussian blue analog (MB@ZrHCF) nanozyme was synthesized using dopamine (DA) reduction-assisted method and employed for colorimetric PO₄^3- sensing. The MB@ZrHCF exhibits enhanced peroxidase-mimicking activity and ultrafast catalytic rate via the color reaction of 3,3',5,5'-tetramethylbenzidine (TMB) oxidized by hydrogen peroxide (H₂O₂). The catalytic reaction mechanism of MB@ZrHCF catalyzing H₂O₂ to produce hydroxyl radical (∙OH) was studied. Then, MB@ZrHCF was successfully applied to the detection of H₂O₂. Additionally, the catalytic activity of the nanocomposite is inhibited due to the steric hindrance effect from the coordination of PO₄^3- and Zr(IV) node. Based on this, the MB@ZrHCF nanozyme can be used to detect PO₄^3- in two linear ranges (10-100 µM and 100-200 µM) with a limit of detection of 2.25 µM. The proposed colorimetric sensor possesses excellent selectivity and reliability for PO₄^3- sensing, which can be successfully applied to detect PO₄^3- in sea and tap water samples.

Selectively Lighting Up Singlet Oxygen via Aggregation-Induced Electrochemiluminescence Energy Transfer

Singlet oxygen (¹O₂) is an important reactive oxygen species (ROS) that is intensively involved in natural photochemical and photobiological processes. Herein, selectively lighting up ¹O₂ is achieved in the aggregation-induced emission (AIE) of electrochemiluminescence (ECL) from the Zn²⁺-mediated AIE assembly of Au nanoclusters (Zn²⁺-AIE-AuNCs). Zn²⁺-AIE-AuNCs can exhibit efficient AIE ECL and photoluminescence (PL) along with ¹O₂ generation in energy and charge transfer routes, respectively. The AIE ECL of the Zn²⁺-AIE-AuNCs/tripropylamine (TEA) system in carbonate buffer is located around 703 nm with the dimeric aggregate of ¹O₂ as an emitter because electrochemically oxidizing coexisted Zn²⁺-AIE-AuNCs and TEA in carbonate buffer would promote the oxygen vacancy (O_v) of Zn²⁺-AIE-AuNCs, which could selectively enable the generation of emissive singlet oxygen in the energy transfer route by effectively transferring the energy from excited singlet Zn²⁺-AIE-AuNCs to the triplet ground state of dissolved oxygen (³O₂). No emissive ¹O₂ is detected via electrochemically oxidizing the Zn²⁺-AIE-AuNCs in the case without either carbonate buffer or TEA, and the Zn²⁺-AIE-AuNCs/TEA system can only exhibit AIE ECL around 485 nm with Zn²⁺-AIE-AuNCs as the emitter in carbonate-free buffers. Photoexciting Zn²⁺-AIE-AuNCs merely brings out band-gap-engineered AIE PL around ∼485 nm with Zn²⁺-AIE-AuNCs as the emitter, which manifests that the ¹O₂ generated in the charge transfer route via photoexciting Zn²⁺-AIE-AuNCs is un-emissive. This work not only proposes an effective strategy for AIE with ¹O₂ as an emitter but also opens a promising way to selectively light up ¹O₂.

Sensitive electrochemiluminescence biosensing of polynucleotide kinase using the versatility of two-dimensional Ti3C2TX MXene nanomaterials

Electrochemiluminescence (ECL) is a powerful readout method for the development of (bio)sensors, whose performances depend on the electrode materials and the architecture of its surface. Herein, we demonstrate that the precise control of the sensing interface using the versatility of two-dimensional (2D) transition metal carbides (Ti₃C₂T_X MXene) leads to the enhancement of the ECL signal. This electrode material, which exhibits remarkable structural and electrochemical properties was decorated by the in situ formation of gold nanoparticles (AuNPs) owing to the Ti reducibility. Then, a large amount of the luminophore, Ru(bpy)₃²⁺, was immobilized on Ti₃C₂T_X MXene thanks to its unique negative charge and large specific surface area to obtain Ru-Ti₃C₂T_X-AuNPs. The presented approach exploits the high catalytic activity and excellent conductivity of this 2D nanomaterial as illustrated by the enhanced ECL emission performance of the Ru-Ti₃C₂T_X-AuNPs nanoprobes. Finally, DNA phosphorylated with polynucleotide kinase (PNK) was recognized efficiently by the chelation between Ti and phosphate group. A highly sensitive and selective ECL biosensor was developed for the detection of PNK and the screening of its inhibitors. A lower detection limit of 0.0002 U mL^-1 and wide linear relationship ranged from 0.002 to 10 U mL^-1 were obtained. Furthermore, the practicality of our method was tested in MCF-7 cell lysate, which opens enticing perspectives for future applications of Ti₃C₂T_X materials in the ECL bioanalysis field.

A Photosensitized Singlet Oxygen (1O2) Toolbox for Bio-Organic Applications: Tailoring 1O2 Generation for DNA and Protein Labelling, Targeting and Biosensing

Singlet oxygen (¹O₂) is the excited state of ground, triplet state, molecular oxygen (O₂). Photosensitized ¹O₂ has been extensively studied as one of the reactive oxygen species (ROS), responsible for damage of cellular components (protein, DNA, lipids). On the other hand, its generation has been exploited in organic synthesis, as well as in photodynamic therapy for the treatment of various forms of cancer. The aim of this review is to highlight the versatility of ¹O_2, discussing the main bioorganic applications reported over the past decades, which rely on its production. After a brief introduction on the photosensitized production of ¹O₂, we will describe the main aspects involving the biologically relevant damage that can accompany an uncontrolled, aspecific generation of this ROS. We then discuss in more detail a series of biological applications featuring ¹O₂ generation, including protein and DNA labelling, cross-linking and biosensing. Finally, we will highlight the methodologies available to tailor ¹O₂ generation, in order to accomplish the proposed bioorganic transformations while avoiding, at the same time, collateral damage related to an untamed production of this reactive species.

Recent Advances in Metal-Organic Framework-Based Electrochemical Biosensing Applications

In the face of complex environments, considerable effort has been made to accomplish sensitive, accurate and highly-effective detection of target analytes. Given the versatility of metal clusters and ligands, high porosity and large specific surface area, metal–organic framework (MOF) provides researchers with prospective solutions for the construction of biosensing platforms. Combined with the benefits of electrochemistry method such as fast response, low cost and simple operation, the untapped applications of MOF for biosensors are worthy to be exploited. Therefore, this review briefly summarizes the preparation methods of electroactive MOF, including synthesize with electroactive ligands/metal ions, functionalization of MOF with biomolecules and modification for MOF composites. Moreover, recent biosensing applications are highlighted in terms of small biomolecules, biomacromolecules, and pathogenic cells. We conclude with a discussion of future challenges and prospects in the field. It aims to offer researchers inspiration to address the issues appropriately in further investigations.

Insights into Electrochemiluminescence Dynamics by Synchronizing Real-Time Electrical, Luminescent, and Mass Spectrometric Measurements

Electrochemiluminescence (ECL) comprises a sophisticated cascade of reactions. Despite advances in mechanistic studies by electrochemistry and spectroscopy, a lack of access to dynamic molecular information renders many plausible ECL pathways unclear or unproven. Here we describe the construction of a real-time ECL mass spectrometry (MS) platform (RT-Triplex) for synchronization of dynamic electrical, luminescent, and mass spectrometric outputs during ECL events. This platform allows immediate and continuous sampling of newly born species at the Pt wire electrode of a capillary electrochemical (EC) microreactor into MS, enabling characterization of short-lived intermediates and the multi-step EC processes. Two ECL pathways of luminol are validated by observing the key intermediates α-hydroxy hydroperoxide and diazaquinone and unraveling their correlation with applied voltage and ECL emission. Moreover, a “catalytic ECL route” of boron dipyrromethene (BODIPY) involving homogeneous oxidation of tri-n-propylamine with the BODIPY radical cation is proposed and verified.

A real-time electrochemiluminescence mass spectrometry platform (RT-Triplex) was developed for revealing ECL mechanisms by synchronization of dynamic electrical, luminescent, and mass spectrometric signals at the electrode–electrolyte interface.

H2O2-activated independently bidirectional regulation for a sensitive and accurate electrochemiluminescence ratiometric analysis

A novel ECL ratiometric sensor was developed based on H2O2 activated independently bidirectional regulation strategy.

Dual-wavelength electrochemiluminescence ratiometry for hydrogen sulfide detection based on Cd2+-doped g-C3N4 nanosheets

Herein, a novel and facile dual-wavelength ratiometric electrochemiluminescence-resonance energy transfer (ECL-RET) sensor for hydrogen sulfide (H₂S) detection was constructed based on the interaction between S^2- and Cd²⁺-doped g-C₃N₄ nanosheets (NSs). Cd²⁺-doped g-C₃N₄ NSs exhibited a strong ECL emission at 435 nm. In the presence of H₂S, CdS was formed in situ on g-C₃N₄ NSs by the adsorption of S^2- and Cd²⁺, generating another ECL emission at 515 nm. Furthermore, the overlapping of the absorption spectrum of the formed CdS and the ECL emission spectrum of g-C₃N₄ NSs led to a feasible RET, thus quenching the ECL intensity from g-C₃N₄ at 435 nm. Through an ECL decrease at 435 nm and an increase at 515 nm, a dual-wavelength ratiometric ECL-RET system for H₂S was designed. The sensor exhibited a lower detection limit of 0.02 μM with a wide linear range of 0.05-100.0 μM. In addition, the applicability of the method was validated by plasma sample analysis with a linear range of 80.0-106.0%. We believe that such a proposal would provide new insight into advanced dual-wavelength ECL ratiometric assays.

Redox Host-Guest Nanosensors Installed with DNA Gatekeepers for Immobilization-Free and Ratiometric Electrochemical Detection of miRNA

Electrochemical nanosensors by integrating functional nucleic acids and nanomaterials hold a great promise in the fast detection of biomarkers, yet the current systems possess limitations on the accessibility of target-probe and probe-electrode interactions and the repeatability of detection. Herein, a host-guest assembly strategy is developed to build redox nanosensors for an immobilization-free and ratiometric electrochemical detection system. Specifically, electroactive molecule (E_m ) guests are loaded in porous hosts of polydopamine nanoparticles (MPDA) to act as dual-signal redox reporters. Hybrid DNA probes of G-quadruplex and a single-stranded anchor DNA are installed as gatekeepers for sealing the mesopores. Thereby, miRNA triggered E_m release by strand displacement reactions and the homogeneous transportation of the hosts/guests to the electrode facilitate the generation of reference signal/response signal at different potentials. Concomitantly applied NIR irradiation boosts the electron transfer from MPDA to the electrode and results in a tenfold increase in the reference signal. Finally, the sensing system through the differential pulse voltammetry method achieves a highly repeatable detection (relative standard deviation 3.8%) of miRNA with a lower detection limit (362 × 10^-15 m). This attractive system paves the way for rational designs of advanced electrochemical biosensors and smart diagnosis.

Microchamber-Free Digital Flow Cytometric Analysis of T4 Polynucleotide Kinase Phosphatase Based on Single-Enzyme-to-Single-Bead Space-Confined Reaction

Digital bioassays have attracted extensive attention in biomedical applications due to their ultrahigh sensitivity. However, traditional digital bioassays require numerous microchambers such as droplets or microwells, which restricts their application scope. Herein, we propose a microchamber-free flow cytometric method for the digital quantification of T4 polynucleotide kinase phosphatase (T4 PNKP) based on an unprecedented phenomenon that each T4 PNKP molecule-catalyzed reaction can be spatially self-confined on a single microbead, which ultimately enables the one-target-to-one-fluorescence-positive microbead digital signal transduction. The digital signal-readout mode can clearly detect T4 PNKP concentrations as low as 1.28 × 10^-10 U/μL, making it most sensitive method to date. Significantly, T4 PNKP can be specifically distinguished from other phosphatases and nucleases in complex samples by digitally counting the fluorescence-positive microbeads, which cannot be realized by traditional bulk measurement-based methods. Taking advantage of the novel space-confined enzymatic feature of T4 PNKP, this digital mechanism can use T4 PNKP as the enzyme label to fabricate digital sensing systems toward various biomolecules such as digital enzyme-linked immunosorbent assay (ELISA). Therefore, this work not only enlarges the toolbox for high-sensitivity biomolecule detection but also opens new gates to fabricate next-generation digital assays.

Co-Quenching Effect between Lanthanum Metal-Organic Frameworks Luminophore and Crystal Violet for Enhanced Electrochemiluminescence Gene Detection

Exploring new electrochemiluminescence (ECL) luminophores to construct high-efficiency sensing systems is always a hot direction for developing ECL sensors. Compared with other luminophores, metal-organic frameworks (MOFs) exhibit high mass transfer ability for accelerating the reactivity in its pore channels, which is conducive to improving the performance of ECL sensors. In this work, La³⁺ -BTC MOFs (LaMOFs) are prepared as the highly active reactor and novel ECL luminophore. On this basis, a novel co-quenching effect mechanism is proposed based on double-stranded DNA (dsDNA) triggered cooperation between LaMOFs and crystal violet (CV) molecules. Under the confined pore channels of LaMOFs, CV can play an important role as the photon-acceptor due to the matched absorption spectrum with the ECL spectrum of LaMOFs, and the electron-acceptor on account of its lowest unoccupied molecular orbital level. Based on the proposed co-quenching effect mechanism, a constructed ECL gene sensor shows good assay performance toward p53 gene in the detection range of 1 pm to 100 nm with a detection limit of 0.33 pm. The co-quenching effect integrating LaMOFs with CV is expected to be a versatile approach in the construction of ECL gene sensor, which has good prospect in expanding the application range of ECL technology.

Zinc-Metal Organic Frameworks: A Coreactant-free Electrochemiluminescence Luminophore for Ratiometric Detection of miRNA-133a

Developing a coreactant-free ratiometric electrochemiluminescence (ECL) strategy based on a single luminophore to achieve more accurate and sensitive microRNA (miRNA) detection is highly desired. Herein, utilizing zinc-metal organic frameworks (Zn-MOFs) as the single luminophore, a novel dual-potential ratiometric ECL biosensor was constructed for ultrasensitive detection of miRNA-133a. The as-prepared Zn-MOFs exhibited simultaneous cathode and anode ECL emission. Furthermore, the Zn-MOFs were confirmed to be a multichannel ECL sensing platform with excellent annihilation and coreactant ECL emission. The corresponding ECL behaviors were investigated in detail. Benefiting from the hybridization chain reaction (HCR) amplification technology, N,N-diethylethylenediamine (DEAEA) was modified on hairpin DNA, and the gained products loaded with quantities of DEAEA enhanced the anodic ECL intensity of Zn-MOFs. In the presence of miRNA-133a, the ECL intensity ratio of anode to cathode (I_a/I_c) was significantly increased, which realized the ultrasensitive ratiometric detection of miRNA-133a. In addition, without an exogenous coreactant, the biosensor revealed superb accuracy and stability. Under optimal conditions, the detection linearity of miRNA-133a was from 50 aM to 50 fM with a low detection limit of 35.8 aM (S/N = 3). This is the first work to use Zn-MOFs as a single emitter for reliable ratiometric ECL bioanalysis, which provides a new perspective for fabricating a ratiometric ECL biosensor platform.