“Switch-On” Fluorescence Detection of Glucose with High Specificity and Sensitivity Based on Silver Nanoparticles Supported on Porphyrin Metal–Organic Frameworks

BODIPYs α-appended with distyryl-linked aryl bisboronic acids: single-step cell staining and turn-on fluorescence binding with D-glucose

Small-molecule sensors that are selective for particular sugars are rare. The synthesis of BODIPYs appended with two boronic acid units is reported, alongside cellular staining/labelling and turn-on fluorescence binding data for carbohydrates. The structural frameworks were designed using computational methods, leaning on the chelation characteristics of bis(boronic acids) and the photophysical properties of BODIPYs. Selective binding to glucose is demonstrated via emission and absorption methods, and the challenges of using NMR data for studying carbohydrate binding are discussed. Furthermore, crystal structures, cell permeability and imaging properties of the BODIPYs appended with two boronic acid units are described. This work presents boronic-acid-appended BODIPYs as a potential framework for tunable carbohydrate sensing and chemical biology staining.

Multimodal biosensing systems based on metal nanoparticles

Biosensors are currently among the most commonly used devices for analysing biomarkers and play an important role in environmental detection, food safety, and disease diagnosis. Researchers have developed multimodal biosensors instead of single-modal biosensors to meet increasing sensitivity, accuracy, and stability requirements. Metal nanoparticles (MNPs) are beneficial for preparing core probes for multimodal biosensors because of their excellent physical and chemical properties, such as easy regulation and modification, and because they can integrate diverse sensing strategies. This review mainly summarizes the excellent physicochemical properties of MNPs applied as biosensing probes and the principles of commonly used MNP-based multimodal sensing strategies. Recent applications and possible improvements of multimodal biosensors based on MNPs are also described, among which on-site inspection and sensitive detection are particularly important. The current challenges and prospects for multimodal biosensors based on MNPs may provide readers with a new perspective on this field.

Dramatic fluorescence enhancement of PCN-224 and its application in "turn off" immunoassay for sensitive detection of E. coli O157:H7 in milk

In this study, a type of luminescent porous coordination network-224 (PCN-224) in alkaline conditions was synthesized with the dramatic fluorescence enhancement by 20.4 times, which was explained by the fact that the decrease of Zr4+ content in alkaline conditions resulted in the partial recovery of the electron cloud density of 4,4',4'',4'''-(Porphine-5,10,15,20-tetrayl) tetrakis(benzoic acid) (TCPP). Given the large overlap between the excitation spectrum of PCN-224 and the absorption band of Ag nanoparticles (Ag NPs), the coating of the Ag layer on PCN-224 triggered the fluorescence quenching effect, which was applied to "turn off" fluorescence immunoassay for sensitive detection of Escherichia coli O157:H7 (E. coli O157:H7) in milk. The proposed immunoassay reached a low limit of detection (LOD) of 3.3 × 102 CFU mL-1, 29.7 times more sensitive than the conventional ELISA. It will provide a novel alternative strategy for sensitively detecting pathogenic bacteria in the field of food safety.

Advances in Chromatographic and Mass Spectrometric Techniques for Analyzing Reducing Monosaccharides and Their Phosphates in Biological Samples

Reducing monosaccharides and their phosphates are critical metabolites in the central carbon metabolism pathway of living organisms. Variations in their content can indicate abnormalities in metabolic pathways and the onset of certain diseases, necessitating their analysis and detection. Reducing monosaccharides and their phosphates exhibit significant variations in content within biological samples and are present in many isomers, which makes the accurate quantification of reducing monosaccharides and their phosphates in biological samples a challenging task. Various analytical methods such as spectroscopy, fluorescence detection, colorimetry, nuclear magnetic resonance spectroscopy, sensor-based techniques, chromatography, and mass spectrometry are employed to detect monosaccharides and phosphates. In comparison, chromatography and mass spectrometry are highly favored for their ability to simultaneously analyze multiple components and their high sensitivity and selectivity. This review thoroughly evaluates the current chromatographic and mass spectrometric methods used for detecting reducing monosaccharides and their phosphates from 2013 to 2023, highlighting their efficacy and the advancements in these analytical technologies.

Zinc porphyrin/MXene hybrids with phosphate-induced stimuli-responsive behavior for dual-mode fluorescent/electrochemiluminescent ratiometric biosensing

Highly sensitive ratiometric biosensors have attracted much attention in biomarker detection, but most rely on single-mode signals, which can affect accuracy. The development of new principles and methods for dual-mode ratiometric sensing can enhance detection accuracy. Herein, the zinc(II) meso-tetra(4-carboxyphenyl) porphyrin/MXene (ZnTCPP/Ti3C2Tx) hybrids with phosphate-induced stimuli-responsive behavior are used to develop a novel dual-mode fluorescent/electrochemiluminescent (FL/ECL) ratiometric biosensor. The composites exhibit FL quenching and enhanced ECL behavior involving dissolved O2. The FL quenching of ZnTCPP/Ti3C2Tx is caused by energy transfer (EnT) and photo-induced electron transfer (PET) from ZnTCPP to Ti3C2Tx. While the introduction of MXene compensates for the inadequate conductivity of ZnTCPP, facilitating electron transfer, which further makes the surface ZnTCPP more capable of activating O2 to produce singlet oxygen (1O2), thereby generating enhanced cathodic ECL. Furthermore, phosphate ions (PO43-) can interact with the Ti sites of ZnTCPP/Ti3C2Tx, leading to competition for coordination with ZnTCPP, which in turn detaches ZnTCPP, resulting in enhanced FL and reduced ECL. On the basis of the phosphate-induced stimuli-responsive behavior, the dual-mode FL/ECL ratiometric biosensing of alkaline phosphatase (ALP) is achieved through ALP-catalyzed production of PO43- cascade effect with ZnTCPP/Ti3C2Tx. The linear detection range for ALP is 0.1-50 mU/mL, with a detection limit as low as 0.0083 mU/mL. This proposed ZnTCPP/Ti3C2Tx composites with stimuli-responsive behavior is expected to provide new ideas for the development of high-sensitivity dual-mode ratiometric biosensors with promising applications in the precise detection of important biomarkers.

In situ anchored ternary hierarchical hybrid nickel@cobaltous sulfide on poly(3,4-ethylenedioxythiophene)-reduced graphene oxide for highly efficient non-enzymatic glucose sensing

A ternary hierarchical hybrid Ni@CoxSy/poly(3,4-ethylenedioxythiophene)-reduced graphene oxide (Ni@CoxSy/PEDOT-rGO) is rationally designed and in situ facilely synthesized as electrocatalyst to construct a binder-free sensing platform for non-enzymatic glucose monitoring through traditional electrodeposition procedure. The as-prepared Ni@CoxSy/PEDOT-rGO presents unique hierarchical structure and multiple valence states as well as strong and robust adhesion between Ni@CoxSy/PEDOT-rGO and GCE. Profiting from the aforementioned merits, the sensing platform constructed under optimal conditions achieved a wide detection range (0.2 μM ~ 2.0 mM) with high sensitivity (1546.32 μA cm-2 mM-1), a rapid response time (5 s), an ultralow detection limit (0.094 μM), superior anti-interference performance, excellent reproducibility and considerable stability. Furthermore, the sensor demonstrates an acceptable accuracy and appreciable recoveries ranging from 90.0 to 102.0% with less than 3.98% RSD in human blood serum samples, indicating the prospect of the sensor for the real samples analysis. It will provide a strategy to rationally design and fabricate ternary hierarchical hybrid as nanozyme for glucose assay.

Porphyrin Metal-organic Framework Sensors for Chemical and Biological Sensing

Porphyrins and porphyrin derivatives have been intensively explored for a number of applications such as sensing, catalysis, adsorption, and photocatalysis due to their outstanding photophysical properties. Their usage in sensing applications, however, is limited by intrinsic defects such as physiological instability and self-quenching. To reduce self-quenching susceptibility, researchers have developed porphyrin metal-organic frameworks (MOFs). Metal-organic frameworks (MOFs), a unique type of hybrid porous coordination polymers comprised of metal ions linked by organic linkers, are gaining popularity. Porphyrin molecules can be integrated into MOFs or employed as organic linkers in the production of MOFs. Porphyrin-based MOFs are a separate branch of the huge MOF family that combines the distinguishing qualities of porphyrins (e.g., fluorescent nature) and MOFs (e.g., high surface area, high porosity) to enable sensing applications with higher sensitivity, specificity, and extended target range. The key synthesis techniques for porphyrin-based MOFs, such as porphyrin@MOFs, porphyrinic MOFs, and composite porphyrinic MOFs, are outlined in this review article. This review article focuses on current advances and breakthroughs in the field of porphyrin-based MOFs for detecting a variety of targets (for example, metal ions, anions, explosives, biomolecules, pH, and toxins). Finally, the issues and potential future uses of this class of emerging materials for sensing applications are reviewed.

The construction of dual-emissive ratiometric fluorescent probes based on fluorescent nanoparticles for the detection of metal ions and small molecules

With the rapid development of fluorescent nanoparticles (FNPs), such as CDs, QDs, and MOFs, the construction of FNP-based probes has played a key role in improving chemical sensors. Ratiometric fluorescent probes exhibit distinct advantages, such as resistance to environmental interference and achieving visualization. Thus, FNP-based dual-emission ratiometric fluorescent probes (DRFPs) have rapidly developed in the field of metal ion and small molecule detection in the past few years. In this review, firstly we introduce the fluorescence sensing mechanisms; then, we focus on the strategies for the fabrication of DRFPs, including hybrid FNPs, single FNPs with intrinsic dual emission and target-induced new emission, and DRFPs based on auxiliary nanoparticles. In the section on hybrid FNPs, methods to assemble two types of FNPs, such as chemical bonding, electrostatic interaction, core satellite or core-shell structures, coordination, and encapsulation, are introduced. In the section on single FNPs with intrinsic dual emission, methods for the design of dual-emission CDs, QDs, and MOFs are discussed. Regarding target-induced new emission, sensitization, coordination, hydrogen bonding, and chemical reaction induced new emissions are discussed. Furthermore, in the section on DRFPs based on auxiliary nanoparticles, auxiliary nanomaterials with the inner filter effect and enzyme mimicking activity are discussed. Finally, the existing challenges and an outlook on the future of DRFP are presented. We sincerely hope that this review will contribute to the quick understanding and exploration of DRFPs by researchers.

Ultrasensitive Fluorescence Platform Based on AgNPs In Situ-Incorporated Zr-MOFs for the Detection of Organophosphorus Pesticides

Organophosphorus pesticides (OPPs) are extensively used in agricultural production, and the contamination caused by their residues has raised significant concerns regarding potential threats to human health. Herein, a novel fluorescence nanoprobe based on an enzyme-mediated silver nanoparticle-modified metal organic framework (AgNPs@PCN-224) was successfully prepared for the rapid detection of OPPs. Initially, AgNPs@PCN-224 were synthesized by reducing silver nitrate (AgNO3) using sodium borohydride (NaBH4) embedded into luminescent PCN-224. This triggered the inner filter effect, leading to fluorescence quenching. Meanwhile, under the catalysis of acetylcholinesterase (AChE) and choline oxidase (CHO), acetylcholine (ATCh) was decomposed to hydrogen peroxide (H2O2), which could destroy AgNPs to form Ag+ released from PCN-224 for fluorescence recovery. Instead, fenitrothion, an OPP, inhibited AChE activity, allowing the quenched fluorescence to be reactivated. Under the current optimum conditions, the fluorescence intensity had a good correlation (Y = -728.5370X + 2178.4248, R2 = 0.9869) over a dynamic range of fenitrothion concentrations from 0.1 to 500 ng/mL, with an LOD of 0.037 ng/mL. In addition, the anti-interference ability and robustness of the proposed sensor was verified for the monitoring of fenitrothion in tea with recoveries of 87.67-103.72% and the relative standard deviations (RSD) < 5.43%, indicating that the system has excellent prospects for OPP determination in practical applications. Furthermore, this work provides a universal platform for screening other enzyme inhibitors to detect OPPs.

Enhancing the Electrochemiluminescence of Porphyrin via Crystalline Networks of Metal-Organic Frameworks for Sensitive Detection of Cardiac Troponin I

Porphyrins easily aggregate due to unfavorable π-π accumulation, causing luminescent quenching in the aqueous phase and subsequently reducing luminescent efficiency. It is a feasible way to immobilize porphyrin molecules through metal-organic framework materials (MOFs). In this study, 5,10,15,20-tetrakis (4-carboxyphenyl) porphyrin (TCPP) was introduced into the metal-organic skeleton (PCN-224) as a ligand. The result showed that the electrochemiluminescence (ECL) and photoluminescence (PL) efficiency of the MOF skeleton was 8.2 and 6.5 times higher than TCPP, respectively. Impressively, the periodic distribution of porphyrin molecules in the MOF framework can overcome the bottleneck of porphyrin aggregation, resulting in the organic ligand TCPP participating in the electron transfer reaction. Herein, based on the PCN-224, a sandwich-type ECL immunosensor was constructed for the determination of cardiac troponin I (cTnI). It provided sensitive detection of cTnI in the range of 1 fg/mL to 10 ng/mL with a detection limit of 0.34 fg/mL. This work not only innovatively exploited a disaggregation ECL (DIECL) strategy via the crystalline framework of MOF to enhance the PL and ECL efficiency of porphyrin but also provided a promising ECL platform for the ultrasensitive monitoring of cTnI.

G-/C-rich ssDNA-based Fe and Cu/Fe nanoclusters with peroxidase-like activity for intracellular ROS production and cytotoxicity applications

Five G-/C-rich single-stranded DNA (ssDNA) with different sequences and lengths were templated to prepare the DNA-Cu, DNA-Fe, and bimetallic DNA-Cu/M nanoclusters (NCs). The peroxidase-like activities of these nanomaterials were studied using H₂O₂ and 3,3',5,5''-tetramethylbenzidine (TMB) as the reaction substrates in HAc-NaAc buffer. It was found that T30-G2-Fe NCs and T30-G2-Cu/Fe NCs, with a size of about 2 nm, exhibit similar and the strongest enzyme-like activity under optimal conditions. Both NCs possess a similarly high affinity to substrates, and the Michaelis-Menten constant (K_m) values to TMB and H₂O₂ are about 11 and 2-3 times lower than those of natural horseradish peroxidase (HRP), respectively. The activity of both nanozymes decreases to about 70% after being kept for one week in pH 4.0 buffer at 4 °C, which is comparable with HRP. Hydroxyl radicals (•OH) are the main reactive oxygen species (ROS) produced in the catalytic reaction. Moreover, both NCs can facilitate in situ generation of ROS in HeLa cells using endogenous H₂O₂. MTT assays indicate that the T30-G2-Cu/Fe NCs exhibit the strong selective cytotoxicity to HeLa cells over HL-7702 cells. The cellular viability is about 70% and 50% after incubating with 0.6 M NCs for 24 h without or with 2 mM H₂O₂, respectively. The current study shows that the T30-G2-Cu/Fe NCs have the potential for chemical dynamic treatment (CDT).

An enzyme-free Ti3C2/Ni/Sm-LDH-based screen-printed-electrode for real-time sweat detection of glucose

Here, we report the fabrication of an enzyme-free glucose sensor benefiting from nickel-samarium nanoparticles-decorated MXene layered double hydroxide (MXene/Ni/Sm-LDH). The electrochemical response of the MXene/Ni/Sm-LDH to glucose was studied via cyclic voltammetry (CV). The fabricated electrode has high electrocatalytic activity for glucose oxidation. The voltametric response of the MXene/Ni/Sm-LDH electrode to glucose was investigated by differential pulse voltammetry (DPV) that demonstrated an extended linear range of from 0.001 to 0.1 mM and 0.25-7.5 mM with a detection limit down to 0.24 μM (S/N = 3) and a sensitivity at 1673.54 μA mM^-1 cm^-2 1519.09 μA mM^-1 cm^-2 in concentrations of 0.01 mM and 1 mM respectively as well as good repeatability, high stability and applicability for the real sample analysis. Moreover, the as-fabricated sensor was applied to glucose detection in human sweat and showed promising results.

CDs-Peroxyfluor Conjugation for Ratiometric Fluorescence Detection of Glucose and Shortening Its Detection Time from Reaction Dynamic Perspective

A ratiometric fluorescence probe based on the conjugation of peroxyfluor-NHS (PF) and carbon dots (CDs) was designed for selective and rapid detection of glucose. When glucose was catalytically oxidized by glucose oxidase (GOx), the product H₂O₂ would react with colorless and non-fluorescent peroxyfluor moiety to give the colored and fluorescent fluorescein moiety which would absorb the energy of CDs emission at 450 nm due to the Förster Resonance Energy Transfer (FRET) and generate a new emission peak at 517 nm. The reaction between PF and H₂O₂ was slow with a rate constant of about 2.7 × 10^-4 s^-1 under pseudo-first-order conditions (1 uM PF, 1 mM H₂O₂), which was unconducive to rapid detection. Given this, a short time detection method was proposed by studying the kinetics of the reaction between PF and H₂O₂. In this method, the detection time was fixed at three minutes. The linear detection of glucose could be well realized even if the reaction was partially done. As glucose concentration increased from 0.05 mM to 5 mM, the fluorescence intensity ratio (I₅₁₇/I₄₅₀) after 3 minutes' reaction of CDs-PF and glucose oxidation products changed linearly from 0.269 to 1.127 with the limit of detection (LOD) of 17.19 μM. In addition, the applicability of the probe in blood glucose detection was verified.

Cerium/polyacrylic acid modified porphyrin metal-organic framework as fluorescence and photothermal sensor for ascorbic acid measurement

A fluorescence and photothermal dual-signal assay was developed for the determination of ascorbic acid (AA). Cerium/polyacrylic acid modified porphyrin metal-organic frameworks (PCN-224@PAA-Ce MOFs) exhibit oxidase-like activity and can effectively oxidize 3,3 ', 5,5 '-tetramethylbenzidine (TMB) from colorless substrates to blue substrates (oxTMB). The absorption spectrum of oxTMB overlaps with the emission spectrum of PCN-224@PAA-Ce, resulting in quenching of fluorescence emission of PCN-224@PAA-Ce. oxTMB, as an excellent photothermal agent, converts the optical signal into the thermal signal (temperature increasing) driven by 808 nm laser. In the presence of AA, the blue oxTMB was reduced to colorless TMB, which led to the fluorescence recovery of PCN-224@PAA-Ce and at the same time, the photothermal signal was changed with the temperature decreasing under the driving of 808 nm laser. The detection limits (LOD) of fluorescence/photothermal dual-mode AA sensor strategies were as low as 0.73 μM and 1.4 μM, respectively. Rapid analysis of ascorbic acid was accomplished with the present procedure, AA in vitamin C tablets and human serum samples were validated.

Silver Halide-Based Nanomaterials in Biomedical Applications and Biosensing Diagnostics

In recent years, silver halide (AgX, X = Cl, Br, I)-based photocatalytic materials have received increasing research attention owing to their excellent visible-light-driven photocatalytic performance for applications in organic pollutant degradation, HER, OER, and biomedical engineering. Ag as a noble metal has a surface plasma effect and can form Schottky junctions with AgX, which significantly promotes electron transport and increases photocatalytic efficiency. Therefore, Ag/AgX can reduce the recombination rate of electrons and holes more than pure AgX, leading to using AgX as a photocatalytic material in biomedical applications. The use of AgX-based materials in photocatalytic fields can be classified into three categories: AgX (Ag/AgX), AgX composites, and supported AgX materials. In this review, we introduce recent developments made in biomedical applications and biosensing diagnostics of AgX (Ag/AgX) photocatalytic materials. In addition, this review also discusses the photocatalytic mechanism and applications of AgX (Ag/AgX) and supported AgX materials.

Ratiometric Fluorescent Metal-Organic Framework Biosensor for Ultrasensitive Detection of Acrylamide

Acrylamide is a neurotoxin and carcinogen that forms during the thermal processing of food, inflicting irreversible harm to human health. Herein, a ratiometric fluorescence biosensor based on a 6-carboxyfluorescein-labeled aptamer (FAM-ssDNA) and porphyrin metal-organic framework (PCN-224) was developed. PCN-224 exhibits strong adsorption capacity for FAM-ssDNA and also quenches the fluorescence of FAM-ssDNA via fluorescence resonance energy transfer and photoinduced electron transfer. FAM-ssDNA hybridizes with complementary DNA to form double-stranded DNA (FAM-dsDNA), which is liberated from the PCN-224 surface, resulting in fluorescence recovery. However, the intrinsic fluorescence of the ligand remains unchanged. Acrylamide can create an adduct with FAM-ssDNA and inhibit the hybridization of FAM-dsDNA, thus realizing ratiometric sensing of acrylamide. The proposed biosensor displays excellent detection performance from 10 nM∼0.5 mM with a limit of detection of 1.9 nM. In conclusion, a fabricated biosensor was successfully applied to detect acrylamide in thermally processed food, and the results were consistent with those of high-performance liquid chromatography.

The local electric field effect of onion-like carbon nanoparticles for improved laser desorption/ionization efficiency of saccharides

It is still a challenge to improve ionization efficiency of saccharides in matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS). Herein, the highly curved onion-like carbon nanoparticles (OCS) were synthesized from the low-price candle raw via a facile strategy. The unique nanostructure of OCS showed large surface area with plentiful mesoporous architecture, highly curved sp² carbon with regulating electronic effect, and good hydrophilicity, which could be beneficial to facilitate the desorption and ionization efficiency in MS process. The prepared OCS material as MALDI matrix exhibited the superior performance for the detection of xylose, glucose, maltose monohydrate, and raffinose pentahydrate in positive-ion mode with low background noise, enhanced ion intensities, uniform distribution, excellent reproducibility, good salt-tolerance, and high sensitivity compared to control candle soot (CS) and traditional α-cyano-4-hydroxycinnamic acid (CHCA) matrices. This highly effective LDI of OCS matrix was attributed to its enhancing local electric field effect, strong UV absorption ability, and high photo-thermal conversion performance. Furthermore, the OCS-assisted LDI MS approach was employed to quantitatively detect glucose in rat serum. This LDI MS platform may have valuable for the analysis of metabolites in clinical research.

A Novel Enzyme-Free Ratiometric Fluorescence Immunoassay Based on Silver Nanoparticles for the Detection of Dibutyl Phthalate from Environmental Waters

A novel ratiometric fluorescent immunoassay was developed based on silver nanoparticles (AgNPs) for the sensitive determination of dibutyl phthalate (DBP). In the detection system, AgNPs were labeled on the secondary antibody (AgNPs@Ab₂) for signal amplification, which aimed to regulate the H₂O₂ concentrations. When AgNPs-Ab₂ and antigen-primary antibody (Ab₁) were linked by specific recognition, the blue fluorescence of Scopoletin (SC) could be effectively quenched by the H₂O₂ added while the red fluorescence of Amplex Red (AR) was generated. Under the optimized conditions, the calculated detection of limit (LOD, 90% inhibition) reached 0.86 ng/mL with a wide linear range of 2.31-66.84 ng/mL, which was approximately eleven times lower than that by HRP-based traditional ELISA with the same antibody. Meanwhile, it could improve the inherent built-in rectification to the environment by the combination of the dual-output ratiometric fluorescence assays with ELISA, which also enhanced the accuracy and precision (recoveries, 87.20-106.62%; CV, 2.57-6.54%), indicating it can be applied to investigate the concentration of DBP in water samples.

Dual-mode sensing of biomarkers based on nano 3D Cu-Flo.@AuNPs-electrocatalyzed oxidation of glucose inducing in-situ H2O2-generation system

A bimodal 3D-electrochemiluminescence (ECL) analysis method was developed, which integrated simpleness, label-free, high-throughput and real time detection together. Firstly, a novel 3D copper-based nanosheet micro-material (Cu-Flo. NMs) coupled with gold nanoparticles/Cysteine (Cu-Flo.@AuNPs-Cys) was prepared to use as the versatile label for both colorimetric and ECL techniques. The 3D-Cu-Flo.@AuNPs-Cys having glucose oxidase-like activity could catalyze glucose to produce H₂O₂ in situ, which was further found to be capable of exhibiting a 30.95-fold higher ECL-intensity for luminol than bare glassy carbon electrodes (GCE). Taking advantages of the 3D-Cu-Flo.@AuNPs-Cys above, a colorimetric and ECL-channel sensor (GCE/3D-Cu-Flo.@AuNPs-Cys) were constructed simultaneously for glucose detection. The fabricated sensor displayed a wide linear range (Glucose: 0.001-50 mmol L^-1, AFP: 2.25 × 10^-7-225 ng mL^-1), impressive low limit of detection (Glucose: 1.27 × 10^-7 mol L^-1, AFP: 1.92 × 10^-8 ng mL^-1, S/N = 3) and acceptable recovery (Glucose: 94% ∼ 104%, AFP: 96.04% ∼ 102.29%) in practical sample. Furthermore, the biosensor showed ultrafast (0.5 min) analysis efficiency, high stability for 6 cyclic potential scans and satisfactory reproducibility for 7 repeated tests. These results demonstrated the proposed 3D dual-modal ECL-biosensor for biomarkers detection had a great potential in clinical diagnostics, promoting the application in biomedical researching and POCT.

Facile synthesis of binary two-dimensional lanthanide metal-organic framework nanosheets for ratiometric fluorescence detection of mercury ions

Three boric acid-functionalized two-dimensional metal-organic frameworks (2D MOFs) nanosheets, namely, 2D Tb-bop, Eu-bop and Tb/Eu-bop nanosheets, were synthesized through simple mixing of a reaction mixture of Tb/Eu salts and 5-boronoisophthalic acid (5-bop) in the presence of triethylamine (TEA) at room temperature. The product had excellent mercury ions (Hg²⁺) sensing properties. The highly exposed boric acid sites on the surface of the 2D structure can undergo a transmetalation reaction with Hg²⁺ to promote the energy transfer between the ligand and the lanthanide ions, thus enhancing the emission of 2D Tb-bop and Eu-bop nanosheets and resulting in high sensitivity for Hg²⁺ sensing. Significantly, the Hg²⁺-induced transmetalation reaction in 2D binary Tb/Eu-bop nanosheets also enhanced the energy transfer between Tb³⁺ and Eu³⁺ nodes, showing a ratiometric fluorescence response toward Hg²⁺, and further improving the sensitivity. This novel 2D ratiometric fluorescence probe showed good linearity from 0.1 to 40 μM for Hg²⁺ with a detection limit of 4.83 nM. This work not only provided a simple and efficient strategy for synthesizing 2D MOFs but also yielded new insights for designing fluorescence probes with excellent sensing properties.

Metal-Organic Frameworks and Their Composites Towards Biomedical Applications

Owing to their unique features, including high cargo loading, biodegradability, and tailorability, metal–organic frameworks (MOFs) and their composites have attracted increasing attention in various fields. In this review, application strategies of MOFs and their composites in nanomedicine with emphasis on their functions are presented, from drug delivery, therapeutic agents for different diseases, and imaging contrast agents to sensor nanoreactors. Applications of MOF derivatives in nanomedicine are also introduced. Besides, we summarize different functionalities related to MOFs, which include targeting strategy, biomimetic modification, responsive moieties, and other functional decorations. Finally, challenges and prospects are highlighted about MOFs in future applications.

Synthesis of bio-templated clickable quantum dots and dual-emitting organic/inorganic complex for ratiometric fluorescence visual assay of blood glucose

With the prevalence of diabetes, rapid and simple blood glucose monitoring becomes more and more important. Here, we reported the synthesis of the bio-templated N3-CdZnTeS quantum dots (QDs), which was...

Colorimetric detection of glucose by a hybrid nanomaterial based on amplified peroxidase-like activity of ferrosoferric oxide modified with gold–platinum heterodimer

An easy and sensitive colorimetric sensor based on the Fe3O4@Au–Pt hybrid nanomaterial was constructed for H2O2 and glucose detection.

Ratiometric fluorescence immunoassay based on MnO2–o-phenylenediamine–fluorescent carbon nanodots for the detection of α-fetoprotein via fluorescence resonance energy transfer

The ratiometric fluorescence immunoassay based on MnO2–o-phenylenediamine–fluorescent carbon nanodots is superior to the traditional single-wavelength-based method.

Direct electrochemistry of silver nanoparticles-decorated metal-organic frameworks for telomerase activity sensing via allosteric activation of an aptamer hairpin

A direct electrochemistry of silver nanoparticles (AgNPs)-anchored metal-organic frameworks (MOFs) is developed for detection of telomerase activity based on allosteric activation of an aptamer hairpin. AgNPs in situ decorated on PCN-224 (AgNPs/PCN-224) constituted the direct electrochemical labels that were further biofunctionalized by recognition moiety of streptavidin (SA). To achieve the target biosensing, an allosteric hairpin-structured DNA was elaborately designed for signal transduction. The presence of telomerase elongated its primer in the hairpin to displace partial stem strand, thus resulted in the formation of SA aptamer-open structure. Through the specific interaction with aptamer, SA-biofunctionalized AgNPs/PCN-224 probe was attached onto the electrode surface, generating electrochemical signal at + 0.072 V of AgNPs centralized by MOF structure. The direct electrochemical biosensor showed target activity-dependent response from 1.0 × 10^-7 to 1.0 × 10^-1 IU L^-1 with a detection limit of 5.4 × 10^-8 IU L^-1. Moreover, the sensor was applied in evaluation of telomerase activity in living cancer cells. The established electrochemical detection approach in this work avoids the critical deoxygenation conditions and additional electrocatalytic reagents, which opens a novel biosensing perspective for direct electrochemistry of MOF-based nanocomposites.

Iron, Nitrogen-Doped Carbon Aerogels for Fluorescent and Electrochemical Dual-Mode Detection of Glucose

Due to their effective catalytic activity and maximum atom utilization, single metal atoms dispersed in carbon matrices have found diverse applications in electrocatalysis, photocatalysis, organic catalysis, and biosensing. Herein, iron is atomically dispersed into nitrogen-doped porous carbon aerogel by a facile pyrolysis procedure, and the resulting nanocomposite behaves both as a peroxidase mimic for the sensitive detection of glucose by fluorescence spectroscopy and as an effective catalyst for the electrochemical oxidation of glucose. The glucose concentration can be quantified within the millimolar to micromolar range with a limit of detection of 3.1 and 0.5 μM, respectively. Such a dual-functional detection platform also shows excellent reproducibility, stability, and selectivity, and the performance in glucose detection of clinical and artificial human body fluids is highly comparable to that of leading assays in recent studies and results from commercial sensors. Results from this study suggest that carbon aerogel-supported single atoms can be used as a dual-functional nanozyme for the construction of low-cost, high-performance dual-signal readout platforms for glucose detection.

Trending Technology of Glucose Monitoring during COVID-19 Pandemic: Challenges in Personalized Healthcare

The COVID-19 pandemic has continued to spread rapidly, and patients with diabetes are at risk of experiencing rapid progression and poor prognosis for appropriate treatment. Continuous glucose monitoring (CGM), which includes accurately tracking fluctuations in glucose levels without raising the risk of coronavirus exposure, becomes an important strategy for the self-management of diabetes during this pandemic, efficiently contributing to the diabetes care and the fight against COVID-19. Despite being less accurate than direct blood glucose monitoring, wearable noninvasive systems can encourage patient adherence by guaranteeing reliable results through high correlation between blood glucose levels and glucose concentrations in various other biofluids. This review highlights the trending technologies of glucose sensors during the ongoing COVID-19 pandemic (2019-2020) that have been developed to make a significant contribution to effective management of diabetes and prevention of coronavirus spread, from off-body systems to wearable on-body CGM devices, including nanostructure and sensor performance in various biofluids. The advantages and disadvantages of various human biofluids for use in glucose sensors are also discussed. Furthermore, the challenges faced by wearable CGM sensors with respect to personalized healthcare during and after the pandemic are deliberated to emphasize the potential future directions of CGM devices for diabetes management.

Direct epitaxial growth of nickel phosphide nanosheets on nickel foam as self-support electrode for efficient non-enzymatic glucose sensing

Design and develop of cost-effective non-enzymatic electrode materials is of great importance for next generation of glucose sensors. In this work, we report a high-performance self-supporting electrode fabricated via direct epitaxial growth of nickel phosphide on Ni foam (Ni₂P/NF) for nonenzymatic glucose sensors in alkaline solution. Under the optimal conditions, the uniform Ni₂P nanosheets could be obtained with an average thickness of 80 nm, which provides sufficient active sites for glucose molecules. As a consequence, the Ni₂P/NF electrode displays superior electrochemistry performances with a high sensitivity of 6375.1μA mM^-1cm^-2, a quick response about 1 s, a low detection limit of 0.14μM (S/N = 3), and good selectivity and specificity. Benefit from the strong interaction between Ni₂P and NF, the Ni₂P/NF electrode is also highly stable for long-term applications. Furthermore, the Ni₂P/NF electrode is capable of analyzing glucose in human blood serum with satisfactory results, indicating that the Ni₂P/NF is a potential candidate for glucose sensing in real life.

"Switch-on" fluorescence sensing platform based on porphyrin metal-organic frameworks for rapid and specific detection of zinc ion

Zinc ion (Zn²⁺) is a necessary transition metal ion in the human body and plays a vital role in biological systems. Therefore, it is meaningful for rapid, sensitive, and specific detection of Zn²⁺. Herein, a "switch-on" fluorescence sensing platform for the detection of Zn²⁺ was successfully established. In this work, we report an optical nanoprobe with amino functional groups based on porphyrin metal-organic frameworks (PCN-NH₂) through a simple treatment method. The modification of the salicylaldehyde (SA) through the C=N acts as a quencher of PCN-NH₂ and the ligand of Zn²⁺ can effectively inhibit the fluorescence emission of PCN-NH₂. The complex of porphyrin-based metal-organic framework and salicylaldehyde (PCN/SA) acts as the fluorescence sensing probe. The presence of Zn²⁺ results in the new emission peak at 448 nm due to the formation of a complex between Zn²⁺ and SA. The corresponding fluorescence signal changes were used to accurately detect the concentration of Zn²⁺. The fluorescence sensing platform shows advantages, including rapid response, high sensitivity, and excellent specificity with a linear detection range of Zn²⁺ between 0.1 and 250 μM, and a low detection limit (LOD) of 0.07 μM. And the feasibility of the method was verified for the quantification of Zn²⁺ in cell lysate, environmental water, and plasma.

Reusable OIRD Microarray Chips Based on a Bienzyme-Immobilized Polyaniline Nanowire Forest for Multiplexed Detection of Biological Small Molecules

Quantitative detection of multiple biological small molecules is critical for health evaluation and disease diagnosis. In this study, a microarray chip featuring a bienzyme-immobilized polyaniline nanowire forest on fluorine-doped tin oxide (bienzyme-PANI/FTO) is developed for this purpose. On such a chip, the target molecules are oxidized under the catalysis of their attached oxidases to produce hydrogen peroxide, which further induces the partial oxidation of local PANI nanowires in the presence of horseradish peroxidase (HRP) enzyme. The redox state change of PANI nanowires is monitored by the oblique incident reflectivity difference (OIRD) technique in a real-time and wireless manner, thus allowing for quantitative analysis of the target molecules. As typical model targets, hydrogen peroxide, glucose, lactic acid, and cholesterol are successfully detected with low detection limits, excellent specificities, and broad detection ranges, all of which fully meet the requirements for clinical analysis of human serum samples. Simultaneous detection of multiple targets on an individual chip is further demonstrated using the OIRD scanning mode. Meanwhile, by simple electrochemical reduction of the PANI nanowires, the chip is reusable for more than eight detection cycles without evident decay in its performance. The detection principle of this chip is also universal to other small molecules, and thus, it shows great promise as a valuable device to analyze biological small molecules.

MnO2 Nanospheres Assisted by Cysteine Combined with MnO2 Nanosheets as a Fluorescence Resonance Energy Transfer System for "Switch-on" Detection of Glutathione

Manganese dioxide nanosheets combined with cysteine-assisted emitting manganese dioxide nanospheres (Cys-MnO₂ nanospheres) is fabricated for the first time as an "off-on" fluorescence detection platform for glutathione (GSH). In this sensing system, Cys-MnO₂ nanospheres served as energy donors, while MnO₂ nanosheets were used as both energy acceptors and recognition units. MnO₂ nanosheets can effectively quench the fluorescence of Cys-MnO₂ nanospheres through the fluorescence resonance energy transfer (FRET). The addition of GSH could reduce MnO₂ nanosheets into Mn²⁺, disrupting the FRET process and restoring the fluorescence of Cys-MnO₂ nanospheres. Under the optimum conditions, the "switch-on" platform we established has a wide response to GSH with a range of 5-50 μM and 150-800 μM, as well as a superior specificity. Importantly, all components of the sensor are nontoxic, biocompatible, easily prepared, and have a high utilization of raw materials. Moreover, the sensing system achieved satisfactory results in human serum, showing a tremendous potential in the field of biomedicine.

Glucose oxidase decorated fluorescent metal-organic frameworks as biomimetic cascade nanozymes for glucose detection through the inner filter effect

Metal-organic frameworks (MOFs) as a peroxidase mimic have been integrated with glucose oxidase (GOx) to achieve one-step glucose detection. However, limited by the loading amount of GOx, the performances of the developed glucose sensing assays still remain to be further improved to meet sensing requirements in diverse biological samples. Herein, with Fe3+ as the metal ion and 2-amino-benzenedicarboxylic acid as a ligand, a fluorescent Fe-based organic framework (NH2-MIL-101) with peroxidase-like activity was synthesized. Due to the large specific surface area (791.75 m2 g-1), 68 μg mg-1 GOx could be immobilized through the amidation coupling reaction, and the product was designated GOx@NH2-MIL-101. With OPD as the substrate, Gox@NH2-MIL-101 achieved highly efficient biomimetic cascade catalysis for one-step glucose detection through an inner filter effect: upon reacting with glucose, GOx@NH2-MIL-101 catalytically oxidized glucose using dissolved O2, and the produced H2O2 concurrently oxidized o-phenylenediamine (OPD) to oxidized OPD (oxOPD), accompanied by the fluorescence of GOx@NH2-MIL-101 at 456 nm being quenched and that of oxOPD at 565 nm being enhanced. With the fluorescent ratio F565/F456 used as a readout signal, a wide linear range of 0.1-600 μM was obtained, and the detection limit was 0.0428 μM. Based on the excellent selectivity and high stability of GOx@NH2-MIL-101, the developed assay was successfully applied to glucose detection in human serum and saliva, presenting potential applications in diverse biological samples and even medical diagnosis.

Polydopamine nanodots-based cost-effective nanoprobe for glucose detection and intracellular imaging

The cellular glucose detection remains a vital topic, which could provide some essential information about the glucose-based pathological and physiological processes. In this study, a smart polydopamine nanodots-based cost-effective fluorescence turn-on nanoprobe (denoted as PDA-Ag-GOx) for intracellular glucose detection is established. Silver nanoparticles (AgNPs) are directly formed in one step by the reduction of fluorescent polydopamine nanodots (PDADs) which have much phenolic hydroxyls on the surface. The fluorescence of PDADs could be quenched by AgNPs through surface plasmon-enhanced energy transfer (SPEET) from donor PDADs to acceptor AgNPs. Glucose oxidase (GOx) is modified on the PDA-Ag NPs by covalent bond. In the presence of glucose, GOx could catalyze glucose to produce H₂O₂ and gluconic acid. The generated acid and H₂O₂ would degrade AgNPs into Ag⁺, the PDADs release and restore its fluorescence. The proposed nanoprobe has some advantages, such as cost-effective, easy preparation, and excellent selectivity toward glucose, which could be successfully utilized to intracellular glucose imaging.

A Bisboronic Acid Sensor for Ultra-High Selective Glucose Assay by 19F NMR Spectroscopy

Glucose is a significant analyte both in biology and biomedical science, it is of great importance to selectively detect glucose both in body fluids and complex mixture. In this study, a simple ¹⁹F NMR based sensor was synthesized easily, which exhibited a high selectivity and robust anti-interference ability toward glucose detection both in a mixture containing up to 10 saccharides and human urine samples without any pretreatment. Combined with this sensor system, glucose could be well detected in human urine samples and the limit of detection was 0.41 mM by using a 400 MHz NMR spectrometer with 128 scans (ca. 4 min). This method had a potential for specific detection of glucose in complex mixture and diagnosis of diabetes mellitus related diseases in body fluid.

The strength in Numbers! Porphyrin hybrid nanostructured materials for chemical sensing

The development of chemical sensors is an urgent need for both environmental and health issues. The breakthrough needed for the advancement of these devices is the development of efficient receptors. Porphyrins have been widely used as sensing layers in chemical sensors, but their integration with nanostructures can greatly boost the performance of these macrocycles, improving from one side the stability of the sensing layer, and from the other, offering additional interaction mechanisms with target analytes. We present here some recent examples of hybrid materials prepared by the integration of porphyrins with metal and metal oxide nanoparticles, porphyrin-based metal organic frameworks and their exploitation as sensing layers in chemical sensors.

Stimuli -triggered fluoro-switching in metal-organic frameworks: applications and outlook

The design and synthesis of efficient sensor materials with fast-responsive and ultrasensitive detection ability is critical to monitor ecological safety, supervise human health, control industrial wastes, and govern food quality among others. Metal-organic frameworks (MOFs) or coordination polymers (CPs) are a new class of porous crystalline materials that have emerged in several potential applications in last two decades. In particular, applications of MOFs as sensory scaffolds for the detection of hazardous pollutants have attracted researchers due to their fabulous structural characteristics and wide range of pore environment tunability. Among several transducer procedures, the luminescence detection of a particular analyte is immensely desirable as it is easy to handle and cost effective, where visual changes in physicochemical attributes can be comprehended via a quick naked eye detection. The porous nature of MOFs facilitates the pre-concentration of target analytes within the pore structure and provides superior host-guest interaction with good detection limits when compared to conventional materials. To this end, guest-induced fluorescence switching in sensory MOFs with good recyclability and unique detectable fingerprints are of particular importance to benefit futuristic monitoring aptitudes and promises environmental remediation. In this review, we present the latest literature based on the analyte-responsive modulation of fluorescence intensity in MOFs towards the detection of target pollutants and discuss the underlying sensing mechanism, which can assist in developing new useful nano-scale devices and sensors.

Construction of an MnO2 nanosheet array 3D integrated electrode for sensitive enzyme-free glucose sensing

MnO₂ based electrochemical enzyme-free glucose sensors remain significantly limited by their low electronic conductivity and associated complex preparation. In this paper, an MnO₂ nanosheet array supported on nickel foam (MnO₂ NS/NF) was prepared using a simple hydrothermal synthesis and employed as a 3D integrated electrode for enzyme-free glucose detection. It was found that MnO₂ NS/NF shows high performance with a wide linear range from 1 μM to 1.13 mM, a high sensitivity of 6.45 mA mM^-1 cm^-2, and a low detection limit of 0.5 μM (S/N = 3). Besides, MnO₂ NS/NF shows high selectivity against common interferences and good reliability for glucose detection in human serum. This work demonstrates the promising role of MnO₂ NS/NF as an efficient integrated electrode in enzyme-free glucose detection with high performance.

An enzyme cascade sensor with resistance to the inherent intermediate product by logic-controlled peroxidase mimic catalysis

Enzyme cascade sensors usually could not discriminate between the target and intermediate product. Herein, based on "AND" logic-controlled activation of the glucose oxidase-copper peroxide sensing system, enzyme cascade detection for glucose with resistance to inherently existing intermediate product H₂O₂ was reported for the first time, which may provide a novel way for facilitating enzyme cascade sensing.

A historical perspective on porphyrin-based metal-organic frameworks and their applications

Porphyrins are important molecules widely found in nature in the form of enzyme active sites and visible light absorption units. Recent interest in using these functional molecules as building blocks for the construction of metal-organic frameworks (MOFs) have rapidly increased due to the ease in which the locations of, and the distances between, the porphyrin units can be controlled in these porous crystalline materials. Porphyrin-based MOFs with atomically precise structures provide an ideal platform for the investigation of their structure-function relationships in the solid state without compromising accessibility to the inherent properties of the porphyrin building blocks. This review will provide a historical overview of the development and applications of porphyrin-based MOFs from early studies focused on design and structures, to recent efforts on their utilization in biomimetic catalysis, photocatalysis, electrocatalysis, sensing, and biomedical applications.

A silicon nanoparticle-based nanoprobe for ratiometric fluorescence and visual detection of glucose

We synthesized SiNPs by a one-step method and established, for the first time, a novel SiNP-based nanoprobe (denoted as SiNPs/OPD/HRP/GOx) for ratiometric fluorescence and visual detection of glucose in serum samples.