Recognition-Driven Remodeling of Dual-Split Aptamer Triggering In Situ Hybridization Chain Reaction for Activatable and Autonomous Identification of Cancer Cells

DNA Gate-Based CRISPR-Cas Exponential Amplification System for Ultrasensitive Small Extracellular Vesicle Detection to Enhance Breast Cancer Diagnosis

Tumor-derived small extracellular vesicles (tEVs) as potential biomarkers possess abundant surface proteins closely related to parent cells, which are crucial for noninvasive cancer diagnosis. However, tEVs exhibit phenotype heterogeneity and low abundance, posing a significant challenge for multiplex detection with a high sensitivity. Herein, we developed a DNA gate-based exponential amplification CRISPR-Cas (DGEAC) system for accurate and ultrasensitive detection of tEVs, which can greatly improve the accuracy of breast cancer (BC) diagnosis. Based on the coexpression of CD63 and vascular endothelial growth factor (VEGF) on BC-derived tEVs, we developed a dual-aptamer-based AND gate fluorescent probe by proximity hybridization. By integrating the target recognition and trans-cleavage activity of Cas12a, an autocatalysis-driven exponential amplification circuit was developed for ultrasensitive detection of CD63 and VEGF proteins on tEVs, which could avoid false negative signals from single protein or other interfering proteins. We achieved highly sensitive detection of tEVs over a linear range from 1.75 × 103 to 3.5 × 108 particles/mL with a detection limit as low as 1.02 × 103 particles/mL. Furthermore, the DGEAC system can distinguish tEVs from tEVs derived from different BC cell lines, including MDA-MB-231, MCF-7, SKBR3, and MCF-10A. Compared to linear amplification (AUC 90.0%), the DGEAC system effectively differentiates BC in different stages (AUC 98.3%).

Split aptamer-based sandwich-type ratiometric biosensor for dual-modal photoelectrochemical and electrochemical detection of 17β-estradiol

BACKGROUND

As one of the most potent environmental estrogens, 17β-estradiol (E2), which can be enriched into organisms through the food chain and cause harmful biological effects in humans, has been frequently detected in the water environment of the world. High performance liquid chromatography (HPLC) and gas chromatograohy-mass spectrometry (GC/MS) have been widely used for quantification of E2. Despite excellent accuracy, tedious pretreatment and expensive instruments result in their limited application. It is clear that there is an urgent need to establish simple, sensitive and accurate methods for the determination of E2.

RESULTS

A split aptamer-based sandwich-type ratiometric biosensor based on split aptamer was developed by coupling photoelectrochemical and electrochemical assays for E2 detection. For analysis, the two fragments of split aptamer recognized E2 by forming sandwich structure, which triggered hybridization chain reaction (HCR) to produce double-stranded DNA (dsDNA) with CdTe quantum dots (QDs) labeled hairpin DNA. The resultant dsDNA can further absorb methylene blue (MB) to sensitize CdTe QDs for an enlarged photocurrent (IPEC) and output a redox current of IMB, and both of them acted as response signals for detection; [Fe(CN)6]3-/4- probe produced redox current of I[Fe(CN)6]3-/4- as reference signal. Using IMB/I[Fe(CN)6]3-/4- and IPEC/I[Fe(CN)6]3-/4- as yardsticks, the developed split aptamer-based sandwich-type ratiometric biosensor provides two linear ranges of 0.1-5000 pg mL-1 for IMB/I[Fe(CN)6]3-/4- and 0.1-10000 pg mL-1 for IPEC/I[Fe(CN)6]3-/4- with detection limits of 0.06 pg mL-1 and 0.02 pg mL-1, respectively.

SIGNIFICANCE

These results of the biosensor are benefiting from the coupling of photoelectrochemical (PEC) and electrochemical (EC) assays as well as the unique cooperative recognition mechanism of split aptamer. This method not only enabled the biosensor to be successfully applied to the determination of E2 in lake water, but also broadens the prospects for the realization of sensitive and accurate detection of E2.

All-in-one fabrication of a ratiometric electrochemical aptasensor with tetrahedral DNA nanostructure for fumonisin B1 detection

Here, we develop an all-in-one strategy for efficient assembly of an electrochemical aptasensor. A multifunctional structure based on a tetrahedral DNA nanostructure (TDN) was synthesized via a one-step annealing process, providing DNA fixation, target recognition, signal amplification and space regulation. Based on the integration of this multifunctional structure, the sensing interface was assembled in one step. A ratiometric aptasensor was constructed by anchoring methylene blue (MB) to the TDN and ferrocene (Fc) on the cDNA. Using the ratio of the currents obtained from Fc and MB as a measure, the developed aptasensor shows excellent analytical performance for fumonisin B1 detection. This strategy is universal and could simplify the fabrication of aptasensors.

Engineered aptamers for molecular imaging

Molecular imaging, including quantification and molecular interaction studies, plays a crucial role in visualizing and analysing molecular events occurring within cells or organisms, thus facilitating the understanding of biological processes. Moreover, molecular imaging offers promising applications for early disease diagnosis and therapeutic evaluation. Aptamers are oligonucleotides that can recognize targets with a high affinity and specificity by folding themselves into various three-dimensional structures, thus serving as ideal molecular recognition elements in molecular imaging. This review summarizes the commonly employed aptamers in molecular imaging and outlines the prevalent design approaches for their applications. Furthermore, it highlights the successful application of aptamers to a wide range of targets and imaging modalities. Finally, the review concludes with a forward-looking perspective on future advancements in aptamer-based molecular imaging.

Methylation-Powered Assembly of a Single Quantum Dot-Based FRET Nanosensor for Antibody-Free and Enzyme-Free Monitoring of Locus-Specific N6-Methyladenosine in Clinical Tissues

N6-Methyladenosine (m6A) is the most pervasive and evolutionarily conserved epitranscriptomic modification in long noncoding RNA (lncRNA), and its dysregulation may induce aberrant transcription and translation programs. Herein, we demonstrate the methylation-powered assembly of a single quantum dot (QD)-based fluorescence resonance energy transfer (FRET) nanosensor for antibody- and enzyme-free monitoring of locus-specific m6A in clinical tissues. The m6A-sensitive DNAzyme VMC10 is employed to identify a specific m6A site in lncRNA, and it catalyzes the hydrolytic cleavage of unmethylated lncRNA. The cleaved lncRNA fails to trigger the subsequent catalytic hairpin assembly (CHA) reaction due to the energy barrier. In contrast, when m6A-lncRNA is present, the methyl group in m6A protects lncRNA from VMC10-mediated cleavage. With the aid of an assistant probe, the retained intact m6A-lncRNA is released from the VMC10/lncRNA complex and subsequently triggers the CHA reaction, generating abundant AF647/biotin dual-labeled duplexes. The assembly of AF647/biotin dual-labeled duplexes onto 605QD results in efficient FRET between 605QD and AF647. The FRET signal can be simply quantified by single-molecule detection. Notably, this assay can be implemented in an antibody-free and enzyme-free manner. This nanosensor can sensitively quantify target m6A with a detection limit of 0.47 fM, and it can discriminate as low as a 0.001% m6A level from excess coexisting counterparts. Importantly, this nanosensor can monitor the cellular m6A level with single-cell sensitivity and profile target m6A expression in breast cancer and healthy para-cancerous tissues, providing a powerful tool for studying the physiological and pathological functions of m6A.

Application and prospects of nucleic acid nanomaterials in tumor therapy

Cancer poses a great threat to human life, and current cancer treatments, such as radiotherapy, chemotherapy, and surgery, have significant side effects and limitations that hinder their application. Nucleic acid nanomaterials have specific spatial configurations and can be used as nanocarriers to deliver different therapeutic drugs, thereby enabling various biomedical applications, such as biosensors and cancer therapy. In recent decades, a variety of DNA nanostructures have been synthesized, and they have demonstrated remarkable potential in cancer therapy related applications, such as DNA origami structures, tetrahedral framework nucleic acids, and dynamic DNA nanostructures. Importantly, more attention is also being paid to RNA nanostructures, which play an important role in gene therapy. Therefore, this review introduces the developmental history of nucleic acid nanotechnology, summarizes the applications of DNA and RNA nanostructures for tumor treatment, and discusses the development opportunities for nucleic acid nanomaterials in the future.

A cell-surface-anchored DNA probe coupled with hybridization chain reaction enzyme-free dual signal amplification for sensitive electrochemical detection of the cellular microenvironment

The cellular microenvironment plays key roles in regulating physiological processes. However, it is still a challenge to detect it with quantification. Here, a simple, biocompatible, and universal strategy based on cell surface-anchored specific DNAzymes and hybridization chain reaction enzyme-free signal amplification for cellular microenvironment electrochemical detection is presented. In this strategy, the cell could be captured on the surface of the electrode via aptamer-target recognition. On the other hand, the DNAzyme hybridized with the substrate strand as a metal ion probe was anchored on the surface of the cell. In the presence of metal ions, the substrate strand could be cleaved into two fragments by the DNAzyme and released from the cell surface. Then, the DNA modified gold nanoparticles (AuNPs) could be captured on the electrode. Subsequently, an alternative hybridization reaction of two hairpin probes was triggered by the carried initiators forming nicked double helices. For signal readout, hemin could be inserted into the double-helix DNA long chain via electrostatic interaction, which could electro-reduce hydrogen peroxide to generate an electrochemical signal. Based on the intrinsic advantages of DNAzymes, including rapid kinetics, high sensitivity, and high selectivity, and the signal amplification strategy, this method should be able to monitor and semi-quantify target metal ions in the cellular microenvironment. Furthermore, this method shows potential for various targets by employing different DNA probes in the cellular microenvironment, providing a platform for bioanalysis.

Sensitive Electrochemical Sensor for Glycoprotein Detection Using a Self-Serviced-Track 3D DNA Walker and Catalytic Hairpin Assembly Enzyme-Free Signal Amplification

Approaches for the detection of targets in the cellular microenvironment have been extensively developed. However, developing a method with sensitive and accurate analysis for noninvasive cancer diagnosis has remained challenging until now. Here, we reported a sensitive and universal electrochemical platform that integrates a self-serviced-track 3D DNA walker and catalytic hairpin assembly (CHA) triggering G-Quadruplex/Hemin DNAzyme assembly signal amplification. In the presence of a target, the aptamer recognition initiated the 3D DNA walker on the cell surface autonomous running and releasing DNA (C) from the triple helix. The released DNA C as the target-triggered CHA moiety, and then G-quadruplex/hemin, was formed on the surface of electrode. Eventually, a large amount of G-quadruplex/hemin was formed on the sensor surface to generate an amplified electrochemical signal. Using N-acetylgalactosamine as a model, benefiting from the high selectivity and sensitivity of the self-serviced-track 3D DNA walker and the CHA, this designed method showed a detection limit of 39 cell/mL and 2.16 nM N-acetylgalactosamine. Furthermore, this detection strategy was enzyme free and exhibited highly sensitive, accurate, and universal detection of a variety of targets by using the corresponding DNA aptamer in clinical sample analysis, showing potential for early and prognostic diagnostic application.

Recent progress in the development of DNA-based biosensors integrated with hybridization chain reaction or catalytic hairpin assembly

As isothermal, enzyme-free signal amplification strategies, hybridization chain reaction (HCR) and catalytic hairpin assembly (CHA) possess the advantages such as high amplification efficiency, excellent biocompatibility, mild reactions, and easy operation. Therefore, they have been widely applied in DNA-based biosensors for detecting small molecules, nucleic acids, and proteins. In this review, we summarize the recent progress of DNA-based sensors employing typical and advanced HCR and CHA strategies, including branched HCR or CHA, localized HCR or CHA, and cascaded reactions. In addition, the bottlenecks of implementing HCR and CHA in biosensing applications are discussed, such as high background signals, lower amplification efficiency than enzyme-assisted techniques, slow kinetics, poor stability, and internalization of DNA probes in cellular applications.

Homogeneous protein assays mediated by dynamic DNA nanotechnology

Driven by recent advances in DNA nanotechnology, analytical methods have been greatly improved for designing simple and homogeneous assays for proteins. The translation from target proteins to DNA outputs dramatically enhances the sensitivity of protein assays. More importantly, the protein-responsive DNA nanotechnology has offered diverse assay mechanisms, allowing flexible assay designs and high sensitivity without the need for sophisticated operational procedures. This review will focus on the design principles and mechanistic insight of analytical assays mediated by protein-responsive DNA nanotechnology, which will serve a general guide for assay design and applications.

Split aptamer remodeling-initiated target-self-service 3D-DNA walker for ultrasensitive detection of 17β-estradiol

DNA walker machines, as one of the dynamic DNA nanodevices, have attracted extensive interest in the field of analysis due to their inherent superiority. Herein, we reported a split aptamer remodeling-initiated target-self-service 3D-DNA walker for ultrasensitive, specific, and high-signal-background ratio determination of 17β-estradiol (E2) in food samples. Two split probes (STWS-a and STWS-b) were rationally designed that can undergo structural reassembled to serve as walking strands (STWS) under the induction of the target. Meanwhile, an intact E6-DNAzyme region was formed and activated at the tail of STWS. The activated E6-DNAzyme then continuously drives the 3D-DNA walker for signal amplification and specific detection of E2. Under optimal conditions, the proposed DNA walker-based biosensor exhibited excellent linearity in the range of 1 pM to 50 nM with a low limit of detection (LOD) of 0.28 pM, and good precision (2.7%) for 11 replicate determinations of 1 nM of E2. Furthermore, the developed DNA walker-based biosensor achieved excellent sensitive analysis of E2 in the complex food matrix with recoveries of 95.6-106.5%. This newly proposed split aptamer-based strategy has the advantages of ultrasensitive, high signal-to-background ratio, and high stability. Noteworthy, the successful operation of the DNA walker initiated by the split aptamer expands the principles of DNA walker design and provides a universal signal amplification platform for trace analysis.

Sensitive Autocatalytic Hybridization Circuit for Reliable In Situ Intracellular Polynucleotide Kinase Imaging

Exploring the characteristic functions of polynucleotide kinase (PNK) could substantially promote the elucidation of PNK-related mechanistic pathways. Yet, the sensitive and reliable detection of intracellular PNK still presents a challenging goal. Herein, we propose a simple autocatalytic hybridization circuit (AHC) for in situ intracellular imaging of PNK with high reliability. The AHC amplifier consists of two mutually activated hybridization chain reaction (HCR) modules for magnified signal transduction. The PNK is transduced into initiator I by phosphorylation and cleavage of mediator H_p. Initiator I activates the initial HCR-1 module, leading to the formation of long dsDNA nanowires that carry numerous initiator T. Then, T-initiated feedback HCR-2 module generates branched products that contain plentiful initiator I, thus realizing an autocatalytic HCR amplification reaction. Simultaneously, the HCR-2 module is also assembled as a versatile signal transduction unit for generating the amplified readout. Based on the mutually sustained accumulation of two initiators for the reciprocal activation of two reaction modules, continuous signal amplification and assembly of high-molecular-weight copolymers endow the AHC system with high sensitivity and robustness for the PNK assay. Moreover, the PNK-sensing AHC system achieves reliable imaging of intracellular PNK, thus showing great potential to decipher the correlation between PNK and related diseases.

A sequentially triggered DNA nanocapsule for targeted drug delivery based on pH-responsive i-motif and tumor cell-specific aptamer

Targeted drug delivery with minor off-target effects is urgently needed for precise cancer treatments. Here, a sequentially triggered strategy based on double targeting elements is designed to meet this purpose. By using an acidic pH-responsive i-motif DNA and a tumor cell-specific aptamer as targeting elements, a smart dual-targeted DNA nanocapsule (ZBI5-DOX) was constructed. ZBI5-DOX can be firstly triggered by acidic pH, and then bind to target cells via aptamer recognition and thus targeted release of the carried DOX chemotherapeutics. With this smart DNA nanocapsule, the carried DOX could be precisely delivered to target SMMC-7721 tumor cells in acidic conditions. After drug treatments, selective cytotoxicity of the DNA nanocapsule was successfully achieved. Meanwhile, the DNA nanocapsule had a specific inhibition effect on target cell migration and invasion. Therefore, this sequentially triggered strategy may provide deep insight into the next generation of targeted drug delivery.

Prospects and challenges of dynamic DNA nanostructures in biomedical applications

The physicochemical nature of DNA allows the assembly of highly predictable structures via several fabrication strategies, which have been applied to make breakthroughs in various fields. Moreover, DNA nanostructures are regarded as materials with excellent editability and biocompatibility for biomedical applications. The ongoing maintenance and release of new DNA structure design tools ease the work and make large and arbitrary DNA structures feasible for different applications. However, the nature of DNA nanostructures endows them with several stimulus-responsive mechanisms capable of responding to biomolecules, such as nucleic acids and proteins, as well as biophysical environmental parameters, such as temperature and pH. Via these mechanisms, stimulus-responsive dynamic DNA nanostructures have been applied in several biomedical settings, including basic research, active drug delivery, biosensor development, and tissue engineering. These applications have shown the versatility of dynamic DNA nanostructures, with unignorable merits that exceed those of their traditional counterparts, such as polymers and metal particles. However, there are stability, yield, exogenous DNA, and ethical considerations regarding their clinical translation. In this review, we first introduce the recent efforts and discoveries in DNA nanotechnology, highlighting the uses of dynamic DNA nanostructures in biomedical applications. Then, several dynamic DNA nanostructures are presented, and their typical biomedical applications, including their use as DNA aptamers, ion concentration/pH-sensitive DNA molecules, DNA nanostructures capable of strand displacement reactions, and protein-based dynamic DNA nanostructures, are discussed. Finally, the challenges regarding the biomedical applications of dynamic DNA nanostructures are discussed.

Tetrahedral framework nucleic acids linked CRISPR/Cas13a signal amplification system for rare tumor cell detection

The sensitive and accurate detection of rare tumor cells provides precise diagnosis and dynamic assessment information in various tumor spectrums. However, rare tumor cells assay is still a challenge due to the exceedingly rare presence in the blood. In this research, we develop a fluorescent approach for the identification of rare tumor cells based on a combination of immunosorbent capture and a three-step signal amplification strategy. First, rare tumor cells are captured by immunoadsorption on 96-well plates. Second, self-synthesized tetrahedral framework nucleic acids (tFNAs) spontaneously anchor into the lipid bilayer of rare tumor cells, resulting in a "one to more" amplification effect. Then, the double-stranded DNA (dsDNA) binds to the vertices of the tFNAs and generates a large amount of target RNA by T7 polymerase, which is the secondary signal amplification. Finally, the target RNA activates the collateral cleavage ability of CRISPR/Cas13a, and the reporter RNA is cleaved for third signal amplification. The detection limit of the proposed method is down to 1 cell mL^-1. Furthermore, the tFNAs-Cas13a system is also shown to be capable of detecting rare tumor cells in spiked-in samples and clinical blood samples. This platform enables speedy detection of rare tumor cells with high sensitivity and good specificity, and shows great potential for tumor diagnosis.

A Self-Serviced-Track 3D DNA Walker for Ultrasensitive Detection of Tumor Exosomes by Glycoprotein Profiling

Sensitive and accurate analysis of low-concentration of tumor-derived exosomes (Exos) in biofluids is essential for noninvasive cancer diagnosis but is still challenging due to the lack of high-sensitive methods with low-cost and easy-operation. Herein, exploiting target Exos as a three-dimensional (3D) track for the first time, we developed a self-serviced-track DNA walker (STDW) for wash-free detection of tumor Exos using exosomal glycoprotein, which was enabled by split aptamer-recognition-initiated autonomous running powered by a catalytic hairpin assembly (CHA). Benefiting from high selectivity and sensitivity of the STDW assay, direct detection of tumor Exos in cell culture medium and serum could also be realized. Furthermore, this method exhibited high accuracy in clinical sample analysis, offering the potential for early cancer diagnosis and postoperative response prediction.

A high-integrated DNA biocomputing platform for MicroRNA sensing in living cells

DNA logic computing has captured increasing interest due to its ability to assemble programmable DNA computing elements for disease diagnosis, gene regulation, and targeted therapy. In this work, we developed an aptamer-equipped high-integrated DNA biocomputing platform (HIDBP-A) with a dual-recognition function that enabled cancer cell targeting. Dual microRNAs were the input signals and can perform AND logic operations. Compared to the free DNA biocomputing platform (FDBP), the integration of all computing elements into the same DNA tetrahedron greatly improved logic computing speed and efficiency owing to the confinement effect reflected by the high local concentration of computing elements. As a proof of concept, the utilization of microRNA as the input signal was beneficial for improving the scalability and flexibility of the sequence design of the logic nano-platform. Given that the different microRNAs were over-expressed in cancer cells, this new HIDBP-A has great promise in accurate diagnosis and logic-controlled disease treatment.

Recent advances in the selection of cancer-specific aptamers for the development of biosensors

An early diagnosis has the potential to greatly decrease cancer mortality. For that purpose, specific cancer biomarkers have been molecularly targeted by aptamer sequences to enable an accurate and rapid detection. Aptamer-based biosensors for cancer diagnostics are a promising alternative to those using antibodies, due to their high affinity and specificity to the target molecules and advantageous production. Synthetic nucleic acid aptamers are generated by in vitro Systematic Evolution of Ligands by Exponential enrichment (SELEX) methodologies that have been improved over the years to enhance the efficacy and to shorten the selection process. Aptamers have been successfully applied in electrochemical, optical, photoelectrochemical and piezoelectrical-based detection strategies. These aptasensors comprise a sensitive, accurate and inexpensive option for cancer detection being used as point-of-care devices. This review highlights the recent advances in cancer biomarkers, achievements and optimizations made in aptamer selection, as well as the different aptasensors developed for the detection of several cancer biomarkers.

Sensitive and selective detection of Mucin1 in pancreatic cancer using hybridization chain reaction with the assistance of Fe3O4@polydopamine nanocomposites

Pancreatic cancer is characterized as the worst for diagnosis lacking symptoms at the early stage, which results in a low overall survival rate. The frequently used techniques for pancreatic cancer diagnosis rely on imaging and biopsy, which have limitations in requiring experienced personnel to operate the expensive instruments and analyze the results. Therefore, there is a high demand to develop alternative tools or methods to detect pancreatic cancer. Herein, we propose a new strategy to enhance the detection sensitivity of pancreatic cancer cells both in biofluids and on tissues by combining the unique property of dopamine coated Fe₃O₄ nanoparticles (Fe₃O₄@DOP NPs) to specifically quench and separate free 6-carboxyfluorescein (FAM) labeled DNA (H₁-FAM/H₂-FAM), and the key feature of hybridization chain reaction (HCR) amplification. We have determined the limit of detection (LOD) to be 21 ~ 41 cells/mL for three different pancreatic cancer cell lines. It was also discovered that the fluorescence intensity of pancreatic cancer cells was significantly higher than that of HPDE-C7 and HepG-2 cells (control cell lines), which express lower MUC1 protein. Moreover, the HCR amplification system was used to identify the cancer cells on pancreatic tissue, which indicated the versatility of our strategy in clinical application. Therefore, the presented detection strategy shows good sensitivity, specificity and has great potential for the diagnosis of pancreatic cancer.

Membrane Protein and Extracellular Acid Heterogeneity-Driven Amplified DNA Logic Gate Enables Accurate and Sensitive Identification of Cancer Cells

DNA logic gates, as a class of smart molecular devices with excellent biocompatibility and convenient information processing mode, have been widely used for identification of cancer cells based on logic analysis of cancer biomarkers. However, most of the developed DNA logic gates for identification of cancer cells are mainly driven by homogeneous biomarkers such as membrane proteins or RNAs, which may suffer from insufficient accuracy. Herein, we reported a membrane protein and extracellular acid heterogeneity-driven amplified DNA logic gate (HDLG) for accurate and sensitive identification of cancer cells by combining the superior signal amplification characteristics of the hybridization chain reaction (HCR) and the precise computation ability of the logic operation. In this strategy, a DNA aptamer was employed for membrane protein recognition, and a split i-motif was used for the response of the extracellular acid. Only when the two heterogeneous biomarkers existed simultaneously, the DNA logic gate could be driven to perform the "AND" logic operation and induce the formation of an intact trigger to initiate a HCR process on the cell surface, generating an amplified "ON" fluorescence signal. Benefiting from the design of heterogeneity-driven and signal amplification, this DNA logic gate could not only autonomously perform high-resolution fluorescence imaging on the surface of target cancer cells, but also perform sensitive analysis of target cancer cells with a cell number of 70 detected in 200 μL of buffer and desirable accuracy in differentiating target cancer cells from complicated cell mixtures. We anticipate that this novel HDLG is expected to be applied in precise disease diagnosis.

A facile biosynthesis strategy of plasmid DNA-derived nanowires for readable microRNA logic operations

Multiple microRNAs (miRNAs) logical assays have attracted wide attention recently, which can be applied to mimic and reveal cellular events at the molecular level. However, it remains challenging to develop...

A label-free and signal-amplifiable assay method for colorimetric detection of carcinoembryonic antigen

In this work, an innovative colorimetric assay method for the determination of carcinoembryonic antigen is developed with aptamer probes utilized as recognition element. DNA hybridization chain reaction is used as signal amplification technique, and peroxidase-mimicking hemin/G-quadruplex-assisted catalytic oxidation of 2,2'-azino-bis-3-ethylbenzothiazoline-6-sulfonic acid (ABTS) is deployed as signal reporting mechanism. The detection principle was firstly verified by using gel electrophoresis analysis and absorbance measurements. After condition optimization, a detection limit was theoretically determined as 24.8 ng/ml. Furthermore, the method exhibited good selectivity and satisfactory recovery rates (92.2%-108.6%) in serum samples. Moreover, the sensing scheme is easily extended for the detection of other analytes via similar target-aptamer recognition principle. To sum up, this is an enzyme- and label-free, cost-effective yet signal-amplifiable assay scheme for the determination of tumor markers with promising simplicity and selectivity, practical utility, and potential universality.

Traditional and new applications of the HCR in biosensing and biomedicine

The hybridization chain reaction is a very popular isothermal nucleic acid amplification technology. A single-stranded DNA initiator triggers an alternate hybridization event between two hairpins forming a double helix polymer. Due to isothermal, enzyme-free and high amplification efficiency characteristics, the HCR is often used as a signal amplification technology for various biosensing and biomedicine fields. However, as an enzyme-free self-assembly reaction, it has some inevitable shortcomings of relatively slow kinetics, low cell internalization efficiency, weak biostability of DNA probes and uncontrollable reaction in these applications. More and more researchers use this reaction system to synthesize new materials. New materials can avoid these problems skillfully by virtue of their inherent biological characteristics, molecular recognition ability, sequence programmability and biocompatibility. Here, we summarized the traditional application of the HCR in biosensing and biomedicine in recent years, and also introduced its new application in the synthesis of new materials for biosensing and biomedicine. Finally, we summarized the development and challenges of the HCR in biosensing and biomedicine in recent years. We hope to give readers some enlightenment and help.

Enhancing the Sensitivity of DNA and Aptamer Probes in the Dextran/PEG Aqueous Two-Phase System

Increasing the local concentration of DNA-based probes is a convenient way to improve the sensitivity of biosensors. Instead of using organic solvents or ionic liquids that phase-separate with water based on hydrophobic interactions, we herein studied a classic aqueous two-phase system (ATPS) comprising polyethylene glycol (PEG) and dextran. Polymers of higher molecular weights and higher concentrations favored phase separation. DNA oligonucleotides are selectively enriched in the dextran-rich phase unless the pH was increased to 12. A higher volume ratio of PEG-to-dextran and a higher concentration of PEG also enrich more DNA probes in the dextran-rich phase. The partition efficiency of the T₁₅ DNA was enriched around seven times in the dextran phase when the volume ratio of dextran and PEG reached 1:10. The detection of limit improved by 3.6-fold in a molecular beacon-based DNA detection system with the ATPS. The ATPS also increased the sensitivity for the detection of Hg²⁺ and adenosine triphosphate, although these target molecules alone distributed equally in the two phases. This work demonstrates a simple method using water soluble polymers to improve biosensors.

Target-Triggered Assembly in a Nanopipette for Electrochemical Single-Cell Analysis

Engineered nanopipette tools have recently emerged as a powerful approach for electrochemical nanosensing, which has major implications in both fundamental biological research and biomedical applications. Herein, we describe a generic method of target-triggered assembly of aptamers in a nanopipette for nanosensing, which is exemplified by sensitive and rapid electrochemical single-cell analysis of adenosine triphosphate (ATP), a ubiquitous energy source in life and important signaling molecules in many physiological processes. Specifically, a layer of thiolated aptamers is immobilized onto a Au-coated interior wall of a nanopipette tip. With backfilled pairing aptamers, the engineered nanopipette is then used for probing intracellular ATP via the ATP-dependent linkage of the split aptamers. Due to the higher surface charge density from the aptamer assembly, the nanosensor would exhibit an enhanced rectification signal. Besides, this ATP-responsive nanopipette tool possesses excellent selectivity and stability as well as high recyclability. This work provides a practical single-cell nanosensor capable of intracellular ATP analysis. More generally, integrated with other split recognition elements, the proposed mechanism could serve as a viable basis for addressing many other important biological species.