Dual-Mode Sensing Platform Guided by Intramolecular Electrochemiluminescence of a Ruthenium Complex and Cationic N,N-Bis(2-(trimethylammonium iodide)propylene) Perylene-3,4,9,10-tetracarboxydiimide for Estradiol Assay

Europium Metal-Organic Framework with a Tetraphenylethylene-Based Ligand: A Dual-Mechanism Quenching Immunosensor for Enhanced Electrochemiluminescence via the Coordination Trigger

The effective applications of electrochemiluminescence (ECL) across various fields necessitate ongoing research into novel luminophores and ECL strategies. In this study, self-luminous flower-like nanocomposites (Eu-tcbpe-MOF) were prepared by coordination self-assembly using the aggregation-induced emission material 1,1,2,2-tetrakis(4-carboxyphenyl)ethylene (H4TCBPE) and Eu(III) ions as the precursors. Compared with the monomers and aggregates of H4TCBPE, Eu-tcbpe-MOF exhibits stronger ECL emission. Such enhanced electrochemiluminescence is due to coordination as the coordination-triggered electrochemiluminescence (CT-ECL) enhancement effect. In this study, a cubic-structured nanocomposite (Co9S8@Au@MoS2) was used as an efficient quencher, and a more sensitive ECL detection platform was achieved by two quenching mechanisms: resonance energy transfer and competitive consumption of coreactants. N,N-Diethylethanolamine (DBAE) was used as a coreactant, and DBAE has a faster electron transfer rate and stronger energy supply efficiency than the traditional anodoluminescent coreactant tripropylamine, which effectively improves the ECL signal intensity of Eu-tcbpe-MOF. Hence, a sandwich-type ECL immunosensor was prepared by employing a dual-quenching mechanism, utilizing Eu-tcbpe-MOF as the detection probe and Co9S8@Au@MoS2 as the quencher, achieving precise detection of carcinoembryonic antigen from 0.1 pg·mL-1 to 100 ng·mL-1 with a detection limit of 35.1 fg·mL-1.

Constructed MXene matrix composites as sensing material and applications thereof: A review

Most studies on MXene matrix composites for sensor development have primarily focused on synthesis and application. Nevertheless, there is currently a lack of research on how the introduction of different materials affects the sensing properties of these composites. The rapid development of MXene has raised intriguing questions about improving sensor performance by combining MXene with other materials such as polymers, metals and inorganic non-metals. This review will concentrate on the construction of MXene-based composites and explore ways to enhance their sensor applications. Specifically, this review describes why the introduction of materials to the system brings the advantage of low concentration and high sensitivity assays, as well as the MXene-based frameworks that have been recently investigated. Lastly, in order to capture the current trend of MXene-based composites in sensor applications and identify promising research directions, this review will critically evaluate the potential applications of newly developed MXene systems.

Dual-mode colorimetric and homogeneous electrochemical detection of intracellular/extracellular H2O2 based on FeSx/SiO2 nanoparticles with high peroxidase-like activity

Abnormal expression of hydrogen peroxide (H₂O₂) elucidates cell dysfunctions and might induce the occurrence and deterioration of various diseases. However, limited by its ultralow level under pathophysiological conditions, intracellular and extracellular H₂O₂ was difficult to be detected accurately. Herein, a colorimetric and homogeneous electrochemical dual-mode biosensing platform was constructed for intracellular/extracellular H₂O₂ detection based on FeS_x/SiO₂ nanoparticles (FeS_x/SiO₂ NPs) with high peroxidase-like activity. In this design, FeS_x/SiO₂ NPs were synthesized with excellent catalytic activity and stability compared to natural enzymes, which improved the sensitivity and stability of sensing strategy. 3,3',5,5'-Tetramethylbenzidine (TMB), as a multifunctional indicator, was oxidized in the presence of H₂O₂, generated color changes and realized visual analysis. In this process, the characteristic peak current of TMB decreased, which could realize the ultrasensitive detection of H₂O₂ by homogeneous electrochemistry. Accordingly, by integrating visual analysis ability of colorimetry and the high sensitivity of homogeneous electrochemistry, the dual-mode biosensing platform exhibited high accuracy, sensitivity and reliability. The detection limits of H₂O₂ were 0.2 μM (S/N = 3) for the colorimetric method and 2.5 nM (S/N = 3) for the homogeneous electrochemistry assay. Therefore, the dual-mode biosensing platform provided a new opportunity for highly accurate and sensitive detection of intracellular/extracellular H₂O₂.

S-CdIn2S4: A novel near-infrared emitter triggered by low potential for constructing a dual-mode immunosensing platform

CdIn₂S₄ is an interesting ternary metal sulfide whose narrow band gap and tunable optical properties offer new opportunities for the development of novel ECL emitters. Here, we use a simple hydrothermal synthesis to obtain hollow spindle CdIn₂S₄ (S-CIS), which exhibits strong near-infrared electrochemiluminescence (ECL) emission with K₂S₂O₈ as a coreactant at a low excitation potential (-1.3 V), which is encouraging. The lower excitation potential of S-CIS is probably due to the low band gap energy, which makes the excitation potential positively shift. This lower excitation potential reduces the side-reactions caused by high voltages, effectively avoiding irreversible damage to biomolecules, and protecting the biological activity of antigens and antibodides. In this work, new features of S-CIS in ECL studies are also presented, demonstrating that the ECL emission mechanism of S-CIS is generated by surface state transitions and that S-CIS exhibits excellent near-infrared (NIR) characteristics. Importantly, we introduced S-CIS into electrochemical impedance spectroscopy (EIS) and ECL to the construct a dual-mode sensing platform to achieve AFP detection. The two models with intrinsic reference calibration and high accuracy showed outstanding analytical performance in AFP detection. The detection limits were 0.862 pg mL^-1 and 16.8 fg mL^-1, respectively. This study demonstrates the key role and great application potential of S-CIS as a novel NIR emitter with easy preparation, low cost and great performance in the development of a simple, efficient and ultrasensitive dual-mode response sensing platform for early clinical use.

Gold nanocluster-confined covalent organic frameworks as bifunctional probes for electrochemiluminescence and colorimetric dual-response sensing of Pb2

The development of bifunctional signal probes based on a single component is highly desirable for sensitive and simple dual-mode detection of Pb²⁺. Here, novel gold nanocluster-confined covalent organic frameworks (AuNCs@COFs) were fabricated as a bisignal generator to enable electrochemiluminescence (ECL) and colorimetric dual-response sensing. AuNCs with both intrinsic ECL and peroxidase-like activity were confined into the ultrasmall pores of the COFs via an in situ growth method. On the one hand, the space-confinement effect of the COFs closed the ligand motion-induced nonradiative transition channels of the AuNCs. As a result, the AuNCs@COFs exhibited a 3.3-fold enhancement in anodic ECL efficiency compared to the solid-state aggregated AuNCs using triethylamine as the coreactant. On the other hand, due to the outstanding spatial dispersibility of the AuNCs in the structurally ordered COFs, a high density of active catalytic sites and accelerated electron transfer were obtained, leading to the promotion of the enzyme-like catalytic capacity of the composite. To validate its practical applicability, a Pb²⁺-triggered dual-response sensing system was proposed based on the aptamer-regulated ECL and peroxidase-like activity of the AuNCs@COFs. Sensitive determinations down to 7.9 pM for the ECL mode and 0.56 nM for the colorimetric mode were obtained. This work provides an approach for designing single element-based bifunctional signal probes for dual-mode detection of Pb²⁺.

Ru(II)-modified metal organic framework as excellent electrochemiluminescence emitter for ultrasensitive nicotine detection

The sensitive and selective nicotine detection in cigarette is necessary due to the cigarette addiction problem and the neurotoxicity of nicotine on human body. In this study, a novel electrochemiluminescence (ECL) emitter with excellent performance was prepared for nicotine analysis, by combining Zr-based metal organic framework (Zr-MOF) and branched polyethylenimine (BPEI)-coated Ru(dcbpy)₃²⁺ through electrostatic interaction. Ru(dcbpy)₃²⁺ integrated by Zr-MOF could be catalyzed by the reaction intermediates SO₄^•-, produced from the co-reactant S₂O₈^2-, resulting in a significant increase in ECL response. Interestingly, SO₄^•- with strong oxidizing ability could preferentially oxidize nicotine, leading to ECL quenching. The constructed ECL sensor based on the Ru-BPEI@Zr-MOF/S₂O₈^2- system displayed ultrasensitive determination of nicotine with a lower detection limit of 1.9 × 10^-12 M (S/N = 3), which is three orders lower than previously reported ECL results and 4-5 orders lower than that of other types of method. This method puts forward a new approach for building efficient ECL system with greatly improved ECL sensitivity for nicotine detection.

Dual-Mode Sensing Platform for Cancer Antigen 15-3 Determination Based on a Silica Nanochannel Array Using Electrochemiluminescence and Electrochemistry

An electrochemiluminescence-electrochemistry (ECL-EC) dual-mode sensing platform based on a vertically-ordered mesoporous silica films (VMSF) modified electrode was designed here for the sensitive and selective determination of cancer antigen 15-3 (CA 15-3), a specific biomarker of breast cancer. VMSF was assembled through a rapid electrochemically assisted self-assembly (EASA) method and plays a crucial role in signal amplification via a strong electrostatic interaction with the positively charged bifunctional probe Ru(bpy₎₃²⁺. To construct the biorecognition interface, epoxy functional silane was linked to the surface of VMSF for further covalent immobilization of the antibody. As a benefit from the specific combination of antigen and antibody, a non-conductive immunocomplex layer was formed in the presence of CA 15-3, leading to the hinderance of the mass and electron transfer of the probes. Based on this strategy, the dual-mode determination of CA 15-3 ranging from 0.1 mU/mL to 100 mU/mL with a LOD of 9 μU/mL for ECL mode, and 10 mU/mL to 200 U/mL with a LOD of 5.4 mU/mL for EC mode, was achieved. The proposed immunosensor was successfully employed for the detection of CA 15-3 in human serum without tedious pretreatment.

Dual-quenching effects of methylene blue on the luminophore and co-reactant: Application for electrochemiluminescent-electrochemical ratiometric zearalenone detection

Methylene blue (MB) is a common multifunctional indicator, which can be applied as a quencher for electrochemiluminescence (ECL) analysis as well as a classical redox probe. Although it is relatively prevalent for MB to study the mechanism with Ru-based luminophores in ECL systems, there are few studies on the effects between MB and co-reactants. In this work, we proposed the first investigation of MB on the luminophore and co-reactant of the self-enhanced ECL composites (nitrogen-doped graphene quantum dots on Ru(bpy)₃²⁺-doped silica nanoparticles, NGQDs-Ru@SiO₂), respectively. The relatively narrow ECL spectrum of luminophore (Ru@SiO₂) and the suitable ultraviolet-visible absorption spectrum of MB led to the ECL resonance energy transfer between them, meanwhile the appropriate energy levels among them facilitated the electron transfer, resulting in a decreased ECL signal (quench mode I). Additionally, the co-reactant (NGQDs) was prone to π-π conjugation with MB due to its abundant π-electrons, which reduced the concentration of NGQDs' intermediates and triggered a weakened ECL signal (quench mode II). Therefore, the dual-quenching effects are ingeniously integrated and designed in one ECL-electrochemical (ECL-EC) ratiometric aptasensor for zearalenone detection, for demonstrating its efficacy in enhancing the sensitivity, which is 4.8-fold higher than Ru@SiO₂ alone. This innovative ratiometric aptasensor achieved a relatively wide linear range from 1.0 × 10^-15 to 5.0 × 10^-8 g mL^-1, and obtained a low detection limit of 8.5 × 10^-16 g mL^-1. Our proposed dual-quenching interactions between MB and NGQDs-Ru@SiO₂ will open a new prospective for ECL-EC ratiometric aptasensor, which further broaden the application in sensitive and precise analysis of mycotoxins.

The combination of highly efficient resonance energy transfer in one nanocomposite and ferrocene-quenching for ultrasensitive electrochemiluminescence bioanalysis

Sensitive and accurate detection of prostate-specific antigen (PSA) is of great significance since it is regarded as a biomarker for prostate diseases. Herein, a facile strategy for the design of highly efficient electrochemiluminescence (ECL) sensor was proposed for PSA assay. Carboxylated graphitic carbon nitride (g-C₃N₄) nanosheet (CCN) and tris (2, 2'-Bipyridyl) ruthenium (II) (Ru(bpy)₃²⁺) encapsulated in silica nanospheres (RuSi NPs) were employed as the donor and acceptor, respectively. CCN and RuSi NPs were covalently bound within one nanocomposite (CCN@RuSi) through the amide bond, which greatly shortened the electron-transfer path. Thus, the resonance energy transfer (RET) efficiency was remarkably increased, providing a high initial ECL intensity for the ECL assay. After the successive introducing of aptamer, PSA, and ferroceneboronic acid (FcBA) on the surface of CCN@RuSi modified electrode, the ECL signal remarkably decreased, which was caused by the steric hindrance of PSA and electron transfer quenching between Fc⁺ and excited-state Ru(bpy)₃²⁺*. Therefore, a highly efficient ECL platform was constructed, which achieved the ultrasensitive detection of PSA with a linear range and a limit of detection of 100 fg/mL - 50 ng/mL and 1.2 fg/mL, respectively. Furthermore, the dual-affinity of the aptamer and FcBA to PSA endowed the sensor with a high selectivity for the determination of PSA in human serum samples. The present work provides an important reference for the integration of RET and quenching strategy in the ECL study with rapid, ultrasensitive, and highly selective detection performances.

Biomaterials and advanced technologies for the evaluation and treatment of ovarian aging

Ovarian aging is characterized by a progressive decline in ovarian function. With the increase in life expectancy worldwide, ovarian aging has gradually become a key health problem among women. Over the years, various strategies have been developed to preserve fertility in women, while there are currently no clinical treatments to delay ovarian aging. Recently, advances in biomaterials and technologies, such as three-dimensional (3D) printing and microfluidics for the encapsulation of follicles and nanoparticles as delivery systems for drugs, have shown potential to be translational strategies for ovarian aging. This review introduces the research progress on the mechanisms underlying ovarian aging, and summarizes the current state of biomaterials in the evaluation and treatment of ovarian aging, including safety, potential applications, future directions and difficulties in translation.

Split aptamer regulated CRISPR/Cas12a biosensor for 17β-estradiol through a gap-enhanced Raman tags based lateral flow strategy

It is significant to exploit the full potential of CRISPR/Cas based biosensor for non-nucleic-acid targets. Here, we developed a split aptamer regulated CRISPR/Cas12a and gap-enhanced Raman tags based lateral flow biosensor for small-molecule target, 17β-estradiol. In this assay, one split aptamer of 17β-estradiol was designed to complement with crRNA of Cas12a so that the trans-cleavage ability of CRISPR/Cas12a can be regulated by the competitive binding of 17β-estradiol and split aptamers. Through integration of the signal amplification ability of CRISPR/Cas12a and the ultra-sensitive gap-enhanced Raman tags based lateral flow assay, a visible-SERS dual mode determination of 17β-estradiol can be established. 17β-estradiol can be visibly recognized as low as 10 pM and accurately quantified with a detection limit of 180 fM by SERS signals, which is at least 10³-fold lower than that of the previous immunoassay lateral flow strategies. Our assay provides a novel perspective to develop split aptamer regulated CRISPR/Cas12a coupling with SERS lateral flow strips for ultrasensitive and easy-to-use non-nucleic-acid targets detection.

Molecularly Imprinted Polymer Functionalized Bi2S3/Ti3C2TX MXene Nanocomposites for Photoelectrochemical/Electrochemical Dual-Mode Sensing of Chlorogenic Acid

We report the proof-of-concept of molecularly imprinted polymer (MIP) functionalized Bi2S3/Ti3C2TX MXene nanocomposites for photoelectrochemical (PEC)/electrochemical (EC) dual-mode sensing of chlorogenic acid (CGA). Specifically, the in-situ growth of the Bi2S3/Ti3C2TX MXene served as a transducer substrate for molecularly imprinted polymers such as PEC and EC signal generators, due to its high surface area, suitable bandwidth and abundant active sites. In addition, the chitosan as a binder was encapsulated into MIP by means of phase inversion on a fluorine-doped tin dioxide (FTO) electrode. In the determination of CGA as an analytical model, the dual-mode sensor based on MIP functionalized Bi2S3/Ti3C2TX MXene nanocomposites had good selectivity, excellent stability and acceptable reproducibility, which displayed a linear concentration range from 0.0282 μM to 2824 μM for the PEC signal and 0.1412 μM to 22.59 μM for the EC signal with a low detection limit of 2.4 nM and 43.1 nM, respectively. Importantly, two dual-response mode with different transduction mechanisms could mutually conform to dramatically raise the reliability and accuracy of detection compared to single-mode detection. This work is a breakthrough for the design of dual-mode sensors and will provide a reasonable basis for the construction of dual-mode sensor platforms.

Designing Triangular Silver Nanoplates with GSH/GSSG Surface Mixed States as Novel Nanoparticle-based Redox Mediators for Electrochemical Biosensing

Herein, a dual signal-quenched electrochemical (EC) biosensing strategy utilizing surface-engineered trisodium citrate (TSC)-glutathione (GSH)/oxidized glutathione (GSSG)-capped triangular silver nanoplates (Tri-Ag NPs_TSC-GSH/GSSG) as a novel nanoparticle-based redox mediator was explored for biomarker determination. In contrast with conventional redox mediators, Tri-Ag NPs_TSC-GSH/GSSG provided more admirable EC performance along with a lower oxidation potential (∼0.14 V). Taking advantage of the split-type mode, the immune response in a 96-well microplate was independent from EC detection, which could effectively eliminate the biological interference and thereby greatly enhance the sensitivity. As for the surface engineering process of Tri-Ag NPs, it was composed of partial GSH replacement and the formation of the GSH/GSSG surface mixed state. Primarily, the signal response of Ag NPs_TSC-GSH decreased due to the hindrance of GSH on electron transfer. Moreover, varying proportions of GSH/GSSG could further impede the oxidation process of Tri-Ag NPs_TSC-GSH/GSSG and eventually realize efficient dual signal quenching of this system. Notably, the ZIF-67@MIL-88B-GO_x nanocomposite as the label was applied for a cascade reaction system with GSH peroxidase-like activities to form the optimal GSH/GSSG proportion, causing sensitive changes in signal response with a range of different antigen concentrations. On this basis, the fabricated biosensor provided measurable outputs of aflatoxin B1 concentrations in a linear range of 0.0005-50 ng/mL with a low detection limit of 0.61 pg/mL (S/N = 3). All of the results indicated that the novel biosensor could be a promising analytical tool for future biomarker detection.

Handheld Platform for Sensitive Rosiglitazone Detection: Immunosensor Based on a Time-Based Readout Device

The detection of rosiglitazone (RSG) in food is of great importance since the excessive intake of RSG could cause adverse effects on the human body. Although liquid chromatography-mass spectrometry and gas chromatography-mass spectrometry are the preliminary methods for the detection of hazardous materials in food, they are not suitable for point-of-care or on-site detection. Herein, a time-based readout (TBR) device with an application software (APP) controlled by a smart phone was developed for the sensitive and selective immunoassay of RSG. The homemade TBR device was based on a two-electrode system, where the immune molecule-modified glassy carbon electrode was used as the bioanode, and Prussian blue-modified FTO was used as the cathode. By using Au-modified octahedral Cu₂O with high catalytic activity as mimetic peroxidase, an insulating layer was generated on the cathode by catalyzing 4-chloro-1-naphthol (4-CN) into benzo-4-chlorohexadienone (B4Q). The time to reach a fixed potential varied indirectly with the concentrations of RSG and was recognized by the APP, while the electrochromic property on the cathode was also correspondingly changed. Under optimum conditions, both the square root of the time and the chroma value of the electrochromism exhibited linear responses for the detection of RSG ranging from 5 × 10^-10 to 5 × 10^-7 g/L, while the limits of detection were 8.2 × 10^-11 and 1.3 × 10^-10 g/L, respectively. With easy operation and portability, this TBR device showed a promising application for point-of-care monitoring of hazardous materials in food or the environment.

An electrochemiluminescence dual “turn-on” strategy for alkaline phosphatase detection using a dual quenching Ru(bpy)32+ encapsulated zeolite imidazole metal organic framework

An electrochemiluminescence (ECL) dual “turn-on” strategy is first designed to detect alkaline phosphatase (ALP) using a dual quenching Ru(bpy)32+ encapsulated zeolite imidazole metal organic framework (Ru(bpy)32+@ZIF-90).

Aptamer functionalized and reduced graphene oxide hybridized porous polymers SPE coupled with LC-MS for adsorption and detection of human α-thrombin

In this study, reduced graphene oxide (rGO) hybridized high internal phase emulsions were developed and polymerized as porous carriers for aptamer (5'/5AmMC6/-AGT CCG TGG TAG GGC AGG TTG GGG TGA CT-3') modification to enrich human α-thrombin from serum. The structure and properties of the materials were confirmed by scanning electron microscope (SEM), Fourier transform infrared spectroscope (FT-IR), and X-ray photoelectron spectra (XPS). The adsorption ability and selectivity were studied and the thrombin was detected with liquid chromatography-mass spectrometry (LC-MS). The adsorption of thrombin onto the sorbent was achieved within 30 min and the desorption was realized using 5.0 mL of acetonitrile/water (80/20, v/v). The thrombin was quantified by LC-MS according to its characteristic peptide sequence of ELLESYIDGR.

An electrochemiluminescence aptasensor for diethylstilbestrol assay based on resonance energy transfer between Ag3PO4-Cu-MOF(II) and silver nanoparticles

In this work, a novel electrochemiluminescence (ECL) aptasensor based on the resonance energy transfer (RET) effect between Ag3PO4-Cu-MOF (ii) and silver nanoparticles (Ag NPs) is proposed. The ECL emission spectra of Ag3PO4-Cu-MOF and the ultraviolet absorption spectra of Ag NPs showed a good spectral overlap. Based on this, we designed an "on-off-on" ECL sensing strategy for the sensitive and specific detection of diethylstilbestrol (DES). Under the optimal conditions, the linear range of the sensor for DES detection was 1.0 × 10-12-1.0 × 10-4 M, with a detection limit of 7.2 × 10-13 M (S/N = 3). The method showed simple and fast operation, high sensitivity and selectivity, a strong anti-interference ability and good stability. More importantly, the developed aptasensor exhibited excellent recognition towards residual DES in actual water samples. The sensor has superior measurement capability and potential application value in the field of environment water quality monitoring.