Using a Chromatographic Pseudophase Model To Elucidate the Mechanism of Olefin Separation by Silver(I) Ions in Ionic Liquids

Evidence for Nanostructures of at Least 20 nm in a Phosphonium Ionic Liquid at Room Temperature Using Fluorescence Correlation Spectroscopy

Fluorescence correlation spectroscopy (FCS) measurements are performed on the ionic liquid (IL), tetradecyl(trihexyl) phosphonium chloride, [P66614+][Cl-], using fluorescent probes of varying sizes: ATTO 532, ∼2 nm; and 20- and 40 nm fluorescent beads. The fluorescence correlation function, G(t), is analyzed in terms of a distribution of diffusion coefficients using a maximum entropy method (MEM). For ATTO 532 and the 20 nm beads, the fit to G(t) yields two well-defined distributions; for the 40 nm beads, however, only one is obtained. These results are consistent with the existence of two nanodomains whose size is greater than or equal to 20 nm and less than 40 nm. The origin of such nanodomains is attributed to a liquid-liquid phase transition. Other groups have observed liquid-liquid phase transitions experimentally in a number of systems, including [P66614+][Cl-]. We suggest that because large regions (i.e., greater than 1-2 nm) resulting from the liquid-liquid phase transition would be expected to have different properties, such as viscosity, and because their presence would necessarily increase the number of interfaces in the IL, these regions may provide an explanation for the exceptional behavior of ILs in various separation systems.

Examining the Influence of Silver(I) Ion Coordination Environment in Ionic Liquids on Olefin-Paraffin Separations using Inverse Gas Chromatography

Silver(I) ions (Ag+) undergo selective π-complexation with olefins and have been employed as separation media for the isolation of olefins from structurally similar paraffins. Ionic liquids (ILs) possess minimal vapor pressures, exceptional thermal stabilities, low melting points, as well as provide a favorable environment for π-complexation between Ag+ ions and olefins. The development of molecular drivers capable of highly selective olefin/paraffin separation systems with Ag+-containing ILs necessitates a comprehensive understanding of all factors that affect olefin solubility and selectivity. This study examines how coordinating different ligand species to Ag+ ions produces separation media with varying interaction strengths to olefins. Four coordination compounds, (4,4'-dimethyl-2,2'-bipyridine)silver(I) bis[(trifluoromethyl)sulfonyl]imide ([Ag+(DMBP)][NTf2-]), bis(pyridine)silver(I) [NTf2-] ([Ag+(Py)2][NTf2-]), bis(2,6-lutidine)silver(I) [NTf2-] ([Ag+(Lut)2][NTf2-]), and (triphenylphosphine)silver(I) [NTf2-] ([Ag+(PPh3)][NTf2-]) were dissolved in the 1-decyl-3-methylimidazolium [NTf2-] ([DMIM+][NTf2-]) IL and employed as stationary phases for inverse gas chromatography. Ligand coordination to the Ag+ ion was observed to modulate interactions of unsaturated hydrocarbons. The [Ag+(Py)2][NTf2-] complex offered the greatest olefin retention among the coordination complexes reaching 54% of the 1-octene retention factor of the uncoordinated [Ag+][NTf2-]. Hydrogen (H2) exposure studies showed ligand-dependent rates of reduction from Ag+ ion to elemental silver (Ag0). The [Ag+(PPh3)][NTf2-] complex exhibited superior stability, compared to the neat [Ag+][NTf2-] salt, reducing the retention factor of 1-octene by 15.3% and 19.4%, respectively, after 200 h of H2 exposure at 70 °C. The results from this study show that coordination complexes with Ag+ ions are useful in highly selective and efficient petroleum processing systems.

Polymeric ionic liquids containing copper(I) and copper(II) ions as gas chromatographic stationary phases for olefin separations

Copper(I) ions (Cu+) are used in olefin separations due to their olefin complexing ability and low cost, but their instability in the presence of water and gases limits their widespread use. Ionic liquids (ILs) have emerged as stabilizers of Cu+ ions and prevent their degradation, providing high olefin separation efficiency. There is limited understanding into the role that polymeric ionic liquids (PILs), which possess similar structural characteristics to ILs, have on Cu+ ion-olefin interactions. Moreover, copper ions with diverse oxidation states, including Cu+ and Cu2+ ions, have been rarely employed for olefin separations. In this study, gas chromatography (GC) is used to investigate the interaction strength of olefins to stationary phases composed of the 1-hexyl-3-methylimidazolium bis[(trifluoromethyl)sulfonyl]imide ([C6MIM+][NTf2-]) IL and the poly(1-hexyl-3-vinylimidazolium [NTf2-]) (poly([C6VIM+][NTf2-])) PIL containing monovalent and divalent copper salts (i.e., [Cu+][NTf2-] and [Cu2+]2[NTf2-]). The chromatographic retention of alkenes, alkynes, dienes, and aromatic compounds was examined. Incorporation of the [Cu2+]2[NTf2-] salt into a stationary phase comprised of poly(dimethylsiloxane) resulted in strong retention of olefins, while its addition to the [C6MIM+][NTf2-] IL and poly([C6VIM+][NTf2-]) PIL allowed for the interaction strength to be modulated. Olefins exhibited greater affinities toward IL and PIL stationary phases containing the [Cu2+]2[NTf2-] salt compared to those with the [Cu+][NTf2-] salt. Elimination of water from both copper salts was observed to be an important factor in promoting olefin interactions, as evidenced by increased olefin retention upon exposure of the stationary phases to high temperatures. To evaluate the long-term thermal stability of the stationary phase, chromatographic retention of probes was measured on the [Cu2+]2[NTf2-]/[C6MIM+][NTf2-] IL stationary phase after its exposure to helium at a temperature of 110 °C.

Elucidating the role of temperature and water on the π-complexation strength of copper(I) ion-containing ionic liquids using inverse gas chromatography

BACKGROUND

The π-complexation capability of copper(I) ion has been exploited in olefin/paraffin separations, but its propensity of undergoing disproportionation to copper(II) ion and copper metal has limited its use. Imidazolium-based ionic liquids (ILs) can serve as solvents for copper(I) ions as they facilitate copper(I) ion-olefin complexation and can enhance its stability. To precisely monitor how copper(I) ions complex with olefins in ILs and evaluate the effects of environmental factors, it is necessary to construct an experimental platform capable of quantitatively measuring their molecular-level interactions.

RESULTS

This study employs an innovative inverse chromatography platform to measure changes in molecular-level interactions between copper(I) ions and olefins when the temperature and water content in the system are carefully controlled. Gas chromatographic stationary phases comprised of the 1-decyl-3-methylimidazolium bis[(trifluoromethyl)sulfonyl]imide ([C10MIM+][NTf2-]) IL containing 0.5 M [Cu+][NTf2-] were pre-heated to 140 °C maximizing copper(I) ion's π-complexation capability. The chromatographic retention of alkenes, dienes, and alkynes on the copper(I) ion/IL stationary phase was observed to be predominantly influenced by their partitioning between the carrier gas and copper(I) ion as well as between the IL and copper(I) ion. Upon introducing water to the system, the Gibbs free energy of solvation for olefins showed less favorable solvation into the stationary phase. In contrast, their solvation was significantly enhanced when the [Cu+][NTf2-]/[C10MIM+][NTf2-] stationary phase was heated to an elevated temperature, indicating that the π-complexation capability of copper(I) ion can be regenerated as needed.

SIGNIFICANCE

This study demonstrates that the stability of copper(I) ions can be improved by dissolving them into appropriate IL solvents. Moreover, the olefin separation performance of the copper(I) ion/IL stationary phase was found to be adjustable by the application of different column treatment conditions (i.e., heating and water introduction), opening the possibility of devising more stable, reliable, and efficient olefin separation systems based on copper(I) ion and IL solvents.

Comparing π-complexation capabilities of ionic liquids containing silver(I) and copper(I) ions by headspace single drop microextraction in combination with high-performance liquid chromatography

Selective π-complexation capabilities of silver(I) and copper(I) ions can be effectively facilitated in ionic liquids. To understand the effects of environmental factors that influence the π-complexation of these metal ions with analytes, techniques that employ small volumes of ionic liquid that can be readily analyzed are desired. In this study, headspace single drop microextraction coupled with HPLC is used to investigate a diverse set of environmental factors on the metal ion-mediated complexation with aromatic compounds in ionic liquid media. Silver(I) and copper(I) bis[(trifluoromethyl)sulfonyl]imide salts were both studied by dissolving them in the 1-decyl-3-methylimidazolium bis[(trifluoromethyl)sulfonyl]imide ionic liquid and employing the mixture as extraction media for aromatic compounds. Water and acetonitrile within the sample solution were observed to interfere with the complexation of silver(I) ions and aromatic compounds, while ethylene glycol and triethylene glycol did not. The temperature and extraction times were optimized to fully facilitate the π-complexation capabilities of metal ions in ionic liquid media. Partition coefficients between the sample headspace and metal ion were determined using a three-phase equilibria model. Although no discernable difference in analyte partitioning between the headspace and ionic liquid solvent was observed, analyte partition coefficients to silver(I) ion tended to be greater compared to copper(I) ion.

Silver-mediated separations: A comprehensive review on advancements of argentation chromatography, facilitated transport membranes, and solid-phase extraction techniques and their applications

The use of silver(I) ions in chemical separations, also known as argentation separations, is a powerful approach for the selective separation and analysis of many natural and synthetic organic compounds. In this review, a comprehensive discussion of the most common argentation separation techniques, including argentation-liquid chromatography (Ag-LC), argentation-gas chromatography (Ag-GC), argentation-facilitated transport membranes (Ag-FTMs), and argentation-solid phase extraction (Ag-SPE) is provided. For each of these techniques, notable advancements, optimized separations, and innovative applications are discussed. The review begins with an explanation of the fundamental chemistry underlying argentation separations, mainly the reversible π-complexation between silver(I) ions and carbon-carbon double bonds. Within Ag-LC, the use of silver(I) ions in thin-layer chromatography, high-performance liquid chromatography, as well as preparative LC are explored. This discussion focuses on how silver(I) ions are employed in the stationary and mobile phase to separate unsaturated compounds. For Ag-GC and Ag-FTMs, different silver compounds and supporting media are discussed, often with relation to olefin-paraffin separations. Ag-SPE has been widely employed for the selective extraction of unsaturated compounds from complex matrices in sample preparation. This comprehensive review of Ag-LC, Ag-GC, Ag-FTMs, and Ag-SPE techniques emphasizes the immense potential of argentation separations in separations science and serves as a valuable resource for researchers seeking to learn, optimize, and utilize argentation separations.

Comparison of olefin/paraffin separation by ionic liquid and polymeric ionic liquid stationary phases containing silver(I) ion using one-dimensional and multidimensional gas chromatography

Silver(I) ions have been used in various studies as components within polymer membranes or ionic liquids (ILs) to enable separation of olefins from paraffins. Polymeric ionic liquids (PILs) are a class of polymers synthesized from IL monomers and typically possess higher thermal and chemical stability than the ILs from which they are formed. Until now, very little is known about the difference in strength of silver(I) ion-olefin interactions when they take place in an IL compared to a PIL. In this work, the chromatographic separation of olefins by stationary phases composed of silver(I) bis[(trifluoromethyl)sulfonyl]imide ([Ag⁺][NTf₂^-]) incorporated into the 1-hexyl-3-methylimidazolium NTf₂ ([HMIM⁺][NTf₂^-]) IL and poly(1-hexyl-3-vinylimidazolium NTf₂) (poly([HVIM⁺][NTf₂^-])) PIL at varying concentrations was investigated. Olefins were more highly retained by silver(I) ions in PILs than in ILs as the silver(I) salt concentration in the stationary was increased. The potential separation power of silver(I)-containing IL and PIL stationary phases in comprehensive two-dimensional gas chromatography (GC×GC) was compared to the conventional one-dimensional system. The separation selectivity of alkenes and alkynes from paraffins was significantly increased, while dienes and aromatic compounds showed insignificant changes in retention. The chemical structural features of IL and PIL that enhance silver(I) ion stability and olefin separation were investigated by using silver(I) trifluoromethanesulfonate ([Ag⁺][OTf^-]), 1-decyl-3-methylimidazolium NTf₂ ([DMIM⁺][NTf₂^-]) IL, poly(1-decyl-3-vinylimidazolium NTf₂ (poly([DVIM⁺][NTf₂^-])) PIL, [HMIM⁺][OTf^-] IL and poly([HVIM⁺][OTf^-]) PIL. Longer alkyl substituents appended to the IL (and PIL) cation increased the strength of silver(I) olefin interaction, and [OTf^-] anions in the IL (and PIL) tended to preserve silver(I) ion from thermal reduction, while also retaining olefins less than the [NTf₂^-]-containing columns. In general, silver(I) ions in PILs possessing analogous chemical structures to ILs exhibited higher silver(I) ion-olefin interaction strength but were less thermally stable.

Deconvoluting the Combined Effects of Gas Composition and Temperature on Olefin Selectivity for Separations Using Silver(I) Ions in Ionic Liquids

Silver(I) ions have the propensity of undergoing reduction to form metallic silver within olefin/paraffin separation systems when they are subjected to hydrogen at elevated temperatures. Ionic liquids (ILs) are versatile solvents known for their low vapor pressure, high thermal stability, and structural tunability and have been shown to minimize hydrogen-induced reduction of silver(I) ions when employed as solvents. In the development of robust separation platforms that employ silver(I) ions, it is essential to deploy reliable approaches capable of measuring and assessing the factors that lower the overall separation performance. In this study, silver(I) ions dissolved in an imidazolium-based IL are subjected to mixed gas streams composed of hydrogen, nitrogen, and methane under varying temperatures. Using inverse gas chromatography, a total of 44 columns with stationary phases containing four different concentrations of silver(I) bis[(trifluoromethyl)sulfonyl]imide ([Ag+][NTf2 -]) dissolved in the 1-decyl-3-methylimidazolium ([C10MIM+]) [NTf2 -] IL were used to measure partition coefficients of olefins and paraffins, as well as aromatics, esters, and ketones. Upon exposing the stationary phases to mixed gases at elevated temperatures, olefin partitioning between the silver(I) ion pseudophase and the two other phases (i.e., carrier gas and IL stationary phase) was observed to decrease over time, while partitioning between the IL stationary phase and carrier gas remained unchanged. It was found that exposure gases composed of 5.0 to 85.0 mol % hydrogen and temperatures ranging from 95 to 130 °C resulted in a remarkable acceleration of silver(I) ion reduction and an approximate 36.4-61.3% decrease in olefin partitioning between the silver(I) ion pseudophase and both the carrier gas and IL stationary phase after 60 h. While binary mixtures of hydrogen and nitrogen resulted in a continuous decrease in silver(I) ion-olefin complexation capability, a ternary gas mixture produced varied silver(I) ion reduction kinetics.

Effect of silver(I) ion reduction on the selectivity of olefins, paraffins, and aromatic compounds by gas chromatographic stationary phases consisting of silver(I) salts in ionic liquids

The olefin/paraffin selectivity offered by ionic liquid (IL) stationary phases can be enhanced through the addition of silver(I) ion, which is well-known to undergo selective complexation with unsaturated compounds. However, such stationary phases often suffer from the loss of chromatographic selectivity as silver(I) ion can be reduced to elemental silver. To maintain the separation performance of silver(I) ion/IL stationary phases, an understanding of factors and conditions that promote the reduction of silver(I) ion is needed. In this study, capillary gas chromatography columns featuring a stationary phase consisting of the 1-decyl-3-methylimidazolium bis[(trifluoromethyl)sulfonyl]imide ([C₁₀MIM⁺][NTf₂^-]) IL impregnated with [Ag⁺][NTf₂^-] were examined to investigate the effects of temperature, hydrogen content in exposure gas stream, and time of heating/exposure events on olefin selectivity. Retention factors of representative analytes, such as C₆ olefins and paraffins as well as aromatic compounds, were measured after subjecting the columns to the aforementioned conditions, followed by an evaluation of selectivity factors over time. Selectivity factors of olefins and aromatic compounds were observed to decrease significantly when the stationary phases were heated to temperatures higher than 110°C as well as being subjected to mixed gas streams containing greater than 50 mol% of hydrogen. As constant column heating temperatures were applied under exposure gas mixtures containing hydrogen and nitrogen, a gradual decrease in analyte selectivity factors was observed under prolonged periods of time. However, application of a ternary gas mixture comprised of 25/50/25 mol% hydrogen/nitrogen/methane resulted in an increase in the 3-hexyne/cis-2-hexene selectivity when measured at 120°C for 60 h, due to a smaller decrease in the retention factor of 3-hexyne compared to cis-2-hexene.

Profiling Olefins in Gasoline by Bromination Using GC×GC-TOFMS Followed by Discovery-Based Comparative Analysis

An analytical workflow for the analysis of olefins in gasoline that combines selective bromination and comprehensive two-dimensional (2D) gas chromatography time-of-flight mass spectrometry (GC×GC-TOFMS) with discovery-based analysis is reported. First, a standard mix containing n-alkanes, 1-alkenes, and aromatic species was brominated and quantified using % reacted as a metric for each compound class, defined as the difference in the total peak area between the brominated and original samples normalized to the original sample. The average % reacted (1 s.d.) values were -1.45% (2.8%) for the alkanes, 99.5% (0.4%) for the alkenes, and 6.7% (11.6%) for the aromatics, demonstrating excellent selectivity toward the alkenes with only minor aromatic bromination. The bromination chemistry was then applied to gasoline, followed by GC×GC-TOFMS analysis of the original and brominated gasoline. This GC×GC-TOFMS data set was then submitted to the supervised discovery tool tile-based F-ratio analysis (FRA), which reduced the large data set to only the chromatographic regions which distinguish between the original and brominated gasoline samples. FRA discovered 314 hits, 56 of which were determined statistically significant using combinatorial null distribution analysis (CNDA), a permutation-based significance test. Since the brominated olefins elute in an uncrowded region of the 2D chromatogram and have no signal in the original sample, their discoverability was greatly increased relative to the original olefins. By combining the information gained from brominated olefin standards and the structured patterns of the GC×GC separations, the top hits were identified as the dibromoalkane products of mono-olefins, with five C5 mono-olefins identified on a species level. The analytical workflow has broad implications for using selective reaction chemistries to facilitate supervised discovery by targeting desired compound classes.

Ionic Liquid Stabilizes Olefin Facilitated Transport Membranes Against Reduction

Separation of olefins from their paraffin analogs relies on energy-intensive cryogenic distillation. Facilitated transport-based membranes that reversibly and selectively bind olefins, but not paraffins, could save considerable amounts of energy. However, the chemical instability of the silver ion olefin-binding carriers in such membranes has been a longstanding roadblock for this approach. We discovered long-term carrier stability against extended exposure to hydrogen, a common contaminant in such streams. Based on UV/Vis absorption and Raman spectroscopy, along with XRD analysis results, certain ionic liquids solubilize silver ions, and anion aggregates surrounding the silver ion carriers greatly attenuate their reduction by hydrogen. Here, we report the stability of olefin/paraffin separation properties under continuous exposure to high pressure hydrogen, which addresses a critical technical roadblock in membrane-based olefin/paraffin separation.