Enhanced Cathodic Electrochemiluminescence of Luminol on Iron Electrodes

Enhancing electrochemiluminescence for chloramphenicol detection based on the synergistic effect of doped Ti3C2 with ultrasound

Chloramphenicol (CAP) is known to be harmful to the environment and food, posing a threat to human health. Developing an effective and convenient method for detecting CAP is crucial. An electrochemiluminescence (ECL) biosensor has been designed for sensitive detection of CAP. The improved ECL behavior was attributed to the synergistic effect of N and P co-doped Ti3C2-Apt1 (N, P-Ti3C2-Apt1) nanoprobes and high intensity focused ultrasound (HIFU) pretreatment. The doping of N and P could improve the electrochemical performance of Ti3C2. HIFU pretreatment generated more reactive oxygen species (ROS) in the luminol-O2 system. N, P-Ti3C2 could aggregate and catalyze ROS, causing an increase in ECL intensity. Furthermore, N, P-Ti3C2 as a carrier loaded more aptamer, which could recognize CAP with high specificity. The detection limit was 0.01 ng/mL. This biosensor has been successfully applied in milk and environmental water samples, highlighting its potential in the field of food and environmental analysis.

Aptamer responsive DNA Functionalized hydrogels electrochemiluminescence biosensor for the detection of adenosine triphosphate

DNA hydrogel represents a noteworthy biomaterial. The preparation of biosensors by combining DNA hydrogel with electrochemiluminescence can simplify the modification process and raise the experimental efficiency. In this study, an electrochemiluminescence (ECL) biosensor based on DNA hydrogel was fabricated to detect adenosine triphosphate (ATP) simply and quickly. CdTe-Ru@SiO2 nanospheres capable of ECL resonance energy transfer (RET) were synthesized and encapsulated CdTe-Ru@SiO2 in the DNA hydrogel to provide strong and stable ECL signals. DNA hydrogel avoided the labeling of ECL signal molecules. The aptamer of ATP as the linker of the hydrogel for the specificity of ATP detection. The cross-linked structure of the aptamer and the polymer chains was opened by ATP, and then the decomposition of the DNA hydrogel initiated the escape of CdTe-Ru@SiO2 to generate an ECL signal. The designed biosensor detected ATP without too much modification and complex experimental steps on the electrode surface, with good specificity and stability, and a wide linear range. The detection range was 10-5000 nM, and the detection limit was 6.68 nM (S/N = 3). The combination of DNA hydrogel and ECL biosensor provided a new way for clinical detection of ATP and other biomolecule.

Electrogenerated chemiluminescence from luminol-labelled microbeads triggered by in situ generation of hydrogen peroxide

We developed a sensing strategy that mimics the bead-based electrogenerated chemiluminescence immunoassay. However, instead of the most common metal complexes, such as Ru or Ir, the luminophore is luminol. The electrogenerated chemiluminescence of luminol was promoted by in situ electrochemical generation of hydrogen peroxide at a boron-doped diamond electrode. The electrochemical production of hydrogen peroxide was achieved in a carbonate solution by an oxidation reaction, while at the same time, microbeads labelled with luminol were deposited on the electrode surface. For the first time, we proved that was possible to obtain light emission from luminol without its direct oxidation at the electrode. This new emission mechanism is obtained at higher potentials than the usual luminol electrogenerated chemiluminescence at 0.3-0.5 V, in conjunction with hydrogen peroxide production on boron-doped diamond at around 2-2.5 V (vs Ag/AgCl).

Wireless rotating bipolar electrochemiluminescence for enzymatic detection

New dynamic, wireless and cost-effective analytical devices are developing rapidly in biochemical analysis. Here, we report on a remotely-controlled rotating electrochemiluminescence (ECL) sensing system for enzymatic detection of a model analyte, glucose, on both polarized sides of an iron wire acting as a bipolar electrode. The iron wire is controlled by double contactless mode, involving remote electric field polarization, and magnetic field-induced rotational motion. The former triggers the interfacial polarization of both extremities of the wire by bipolar electrochemistry, which generates ECL emission of the luminol derivative (L-012) with the enzymatically produced hydrogen peroxide in presence of glucose, at both anodic and cathodic poles, simultaneously. The latter generates a convective flow, leading to an increase in mass transfer and amplifying the corresponding ECL signals. Quantitative glucose detection in human serum samples is achieved. The ECL signals were found to be a linear function of the glucose concentration within the range of 10-1000 μM and with a limit of detection of 10 μM. The dynamic bipolar ECL system simultaneously generates light emissions at both anodic and cathodic poles for glucose detection, which can be further applied to biosensing and imaging in autonomous devices.

Electrogenerated Chemiluminescence Imaging of Single-Atom Nanocatalysts

Single-atom catalysts (SACs), distinguished by their maximum atom efficiency and precise control over the coordination and electronic properties of individual atoms, show great promise in electrocatalysis. Gaining a comprehensive understanding of the electrochemical performance of SACs requires the screening of electron transfer process at micro/nano scale. This research pioneers the use of electrogenerated chemiluminescence microscopy (ECLM) to observe the electrocatalytic reactions at individual SACs. It boasts sensitivity at the single photon level and temporal resolution down to 100 ms, enabling real-time capture of the electrochemical behavior of individual SACs during potential sweeping. Leveraging the direct correlation between ECL emission and heterogeneous electron transfer processes, we introduced photon flux density for quantitative analysis, unveiling the electrocatalytic efficiency of individual SACs. This approach systematically reveals the relationship between SACs based on different metal atoms and their peroxidase (POD)-like activity. The outcomes contribute to a fundamental understanding of SACs and pave the way for designing SACs with diverse technological and industrial applications.

Novel immunosensor based on electrochemiluminescence inner filter effect and static quenching between fibrillary Ag-MOGs and SiO2@PANI@AuNPs for enabling the sensitive detection of neuron-specific enolase

Metal-organic gels (MOGs) are unique supramolecular gels that are convenient to synthesize. In this work, a cathodic electrochemiluminescence (ECL) system based on Ag-MOGs as a luminophore and K2S2O8 as a co-reactor was developed. The ECL spectrum of the Ag-MOGs overlapped significantly with the strong UV-Vis spectrum of the SiO2@PANI@AuNPs, which effectively quenched the ECL luminescence of the Ag-MOGs. Relying on the inner filter effect between Ag-MOGs and SiO2@PANI@AuNPs, a novel ECL-IFE immunosensor was developed for the detection of neuron-specific enolase (NSE). Under optimal conditions, the ECL signal of the immunosensor displayed excellent linearity over the NSE concentration range of 10 fg/mL-100 ng/mL. The limit of detection (LOD) was 2.6 fg/mL (S/N = 3) with a correlation coefficient R2 of 0.9975. The ECL immunosensor also exhibited excellent stability and reproducibility for the detection of NSE. The results reported provide a feasible concept for the development analytical methods for the detection of other clinically relevant biomarkers.

Cathodic electrochemiluminescence of L012 and its application in antioxidant detection

Cathodic electrochemiluminescence (ECL) of a luminol (or its analogues)-dissolved oxygen (O2) system is an ideal alternative to ECL of the traditional luminol-hydrogen peroxide (H2O2) system, which can efficiently avoid the self-decomposition of H2O2 at room temperature. However, the mechanism for the generation of cathodic ECL by the luminol (or its analogues)-O2 system is still ambiguous. Herein, we report the study of cathodic ECL generation by the L012-O2 system at a glassy carbon electrode (GCE). The types of reactive oxygen species (ROS) involved generated during ECL reactions were verified. A possible reaction mechanism for the system was proposed and the rate constants of related reactions were estimated. Furthermore, several intermediates of L012 involved in the proposed pathways were validated by electrochemistry-coupled mass spectrometry. Finally, the cathodic ECL system was successfully used for measuring the antioxidant capacity of commercial juice with Trolox as a standard.

Electroless Deposition of Palladium Nanoparticles on Graphdiyne Boosts Electrochemiluminescence

Modulating the electronic structure of metal nanoparticles via metal-support interaction has attracted intense interest in the field of catalytic science. However, the roles of supporting substrates in regulating the catalytic properties of electrochemiluminescence (ECL) remain elusive. Here, we find that the use of graphdiyne (GDY) as the substrate for electroless deposition of Pd nanoparticles (Pd/GDY) produces the most pronounced anodic signal enhancement in luminol-dissolved oxygen (O2) ECL system as co-reactant accelerator over other carbon-based Pd composite nanomaterials. Pd/GDY exhibits electrocatalytic activity for the reduction of O2 through a four-electron pathway at approximately -0.059 V (vs Ag/AgCl) in neutral solution forming reactive oxygen species (ROS) as intermediates. The study shows that the interaction of Pd and GDY increases the amount and stability of ROS on the Pd/GDY electrode surface and promotes the reaction of ROS and luminol anion radical to generate excited luminol, which significantly boosts the luminol anodic ECL emission. Based on quenching of luminol ECL through the consumption of ROS by antioxidants, we develop a platform for the detection of intracellular antioxidants. This study provides an avenue for the development of efficient luminol ECL systems in neutral media and expands the biological application of ECL systems.

Electrochemiluminescence Analysis of Multiple Glycans on Single Living Cell with a Closed Bipolar Electrode Array Chip

The profiling of multiple glycans on a single cell is important for elucidating glycosylation mechanisms and accurately identifying disease states. Herein, we developed a closed bipolar electrode (BPE) array chip for live single-cell trapping and in situ galactose and sialic acid detection with the electrochemiluminescence (ECL) method. Methylene blue-DNA (MB-DNA) as well as biotin-DNA (Bio-DNA) codecorated AuNPs were prepared as nanoprobes, which were selectively labeled on the cell surface through chemoselective labeling techniques. The individual cell was captured and labeled in the microtrap of the cathodic chamber, under an appropriate potential, MB molecules on the cellular membrane underwent oxidation, triggering the reduction of [Ru(bpy)3]2+/TPA and consequently generating ECL signals in the anodic chamber. The abundance of MB groups on the single cell enabled selective monitoring of both sialic acid and galactosyl groups with high sensitivity using ECL. The sialic acid and galactosyl content per HepG2 cell were detected to be 0.66 and 0.82 fmol, respectively. Through comprehensive evaluation of these two types of glycans on a single cell, tumor cells, and normal cells could be effectively discriminated and the accuracy of single-cell heterogeneous analysis was improved. Additionally, dynamic monitoring of variations in galactosyl groups on the surface of the single cell was also achieved. This work introduced a straightforward and convenient approach for heterogeneity analysis among single cells.

Dumbbell hybridization chain reaction coupled with positively charged Au@luminol nanoparticles for enhanced electrochemiluminescent sensing of exosomal miRNA-21

MicroRNAs (miRNAs) are important cancer biomarkers in cancer cell-derived exosomes. Herein, positively charged Au@luminol nanoparticles ((+)Au@luminol NPs) with enhanced electrochemiluminescence (ECL) and extreme stability were firstly established for the sensitive detection of miRNA-21 in exosome. In the presence of miRNA-21, dumbbell hybridization chain reaction (DHCR) happened at gold nanoparticles and ZIF-67 metal-organic framework modified glass carbon electrode (AuNP/ZIF-MOF/GCE) with the help of dumbbell DNA fuel strands (DHP1 and DHP2). The formed DHCR polymers were negatively charged and could electrostatically adsorb numbers of (+)Au@luminol NPs to produce strong ECL signal. Combing DHCR signal amplification with (+)Au@luminol NPs enhancer, sensitive detection of miRNA-21 realized with a detection limit of 0.43 fM. Moreover, the proposed method was successfully applied for the analysis of miRNA-21 in serum samples of healthy individuals and breast cancer patients, indicating a potential application value in early clinical diagnosis.

Development of a P-tau217 Electrochemiluminescent Immunosensor Reinforced with Au-Cu Nanoparticles for Alzheimer's Disease Precaution

To simply and rapidly detect the highly phosphorylated tau protein at threonine 217 (p-tau217) as a precautionary measure against Alzheimer's disease and distinguish it from other neurodegenerative diseases, a novel immunosensor was prepared using luminol as the electrochemiluminescent (ECL) sensing probe reinforced by Au-Cu nanoparticles (Au-Cu NPs). The Au-Cu alloy NPs were prepared via a co-reduction reaction, exhibiting excellent conductivity and catalytic activity. These properties remarkably enhanced the ECL of luminol, providing a suitable background for the sensing response. After the Au-Cu NPs were decorated on the surface of indium tin oxide glass using 3-amino-propyl trimethoxysilane, the antibody of p-tau217 was immobilized via dominant Au-N bonding to enable the biological specificity of the immunosensor. When p-tau217 specifically interacted with an antibody to form an immune complex on the sensing interface, the ECL signal of the sensor was considerably inhibited by the resulting giant biomolecular complex. This complex prevented luminol diffusion to the electrode surface and electron transfer. The resulting immunosensor showed remarkable sensitivity to p-tau217, with a wide linear detection range from 5 to 600 pg/mL. A detection limit of 0.56 pg/mL was achieved, with recoveries in human serum ranging from 92.3 to 109%. This ECL immunosensor demonstrated high sensitivity and specificity toward p-tau217, along with good reproducibility and stability, providing a new approach for clinical research on Alzheimer's disease.

Endogenous and exogenous wireless multimodal light-emitting chemical devices

Multimodal imaging is a powerful and versatile approach that integrates and correlates multiple optical modalities within a single device. This concept has gained considerable attention due to its potential applications ranging from sensing to medicine. Herein, we develop several wireless multimodal light-emitting chemical systems by coupling two light sources based on different physical principles: electrochemiluminescence (ECL) occurring at the electrode interface and a light-emitting diode (LED) switched on by an electrochemically triggered electron flow. Endogenous (thermodynamically spontaneous redox process) and exogenous (requiring an external power source) bipolar electrochemistry acts as a driving force to trigger both light emissions at different wavelengths. The results presented here interconnect optical imaging and electrochemical reactions, providing a novel and so far unexplored alternative to design autonomous hybrid systems with multimodal and multicolor optical readouts for complex bio-chemical systems.

A Carbonate-Involved Amplification Strategy for Cathodic Electrochemiluminescence of Luminol Triggered by the Catalase-like CoO Nanorods

The lumiol-O₂ electrochemiluminescence (ECL) system constantly emits bright light at positive potential. Notably, compared with the anodic ECL signal of the luminol-O₂ system, the great virtues of cathodic ECL are that it is simple and causes minor damage to biological samples. Unfortunately, little emphasis has been paid to cathodic ECL, owing to the low reaction efficacy between luminol and reactive oxygen species. The state-of-the-art work mainly focuses on improving the catalytic activity of the oxygen reduction reaction, which remains a significant challenge. In this work, a synergistic signal amplification pathway is established for luminol cathodic ECL. The synergistic effect is based on the decomposition of H₂O₂ by catalase-like (CAT-like) CoO nanorods (CoO NRs) and regeneration of H₂O₂ by a carbonate/bicarbonate buffer. Compared with Fe₂O₃ nanorod (Fe₂O₃ NR)- and NiO microsphere-modified glassy carbon electrodes (GCEs), the ECL intensity of the luminol-O₂ system is nearly 50 times stronger when the potential ranged from 0 to -0.4 V on the CoO NR-modified GCE in a carbonate buffer solution. The CAT-like CoO NRs decompose the electroreduction product H₂O₂ into OH^· and O₂^·-, which further oxidize HCO₃^- and CO₃^2- to HCO₃^· and CO₃^·-. These radicals very effectively interact with luminol to form the luminol radical. More importantly, H₂O₂ can be regenerated when HCO₃^· dimerizes to produce (CO₂)₂*, which provides a cyclic amplification of the cathodic ECL signal during the dimerization of HCO₃^·. This work inspires developing a new avenue to improve cathodic ECL and deeply understand the mechanism of a luminol cathodic ECL reaction.

Simultaneous Detection of Ovarian Cancer-Concerned HE4 and CA125 Markers Based on Cu Single-Atom-Triggered CdS QDs and Eu MOF@Isoluminol ECL

Simultaneous detection of different disease markers is significant for clinical diagnosis. In this work, a dual-signal electrochemiluminescence (ECL) immunosensor was constructed for the simultaneous detection of carbohydrate antigen 125 (CA125) and human epithelial protein 4 (HE4) markers of ovarian cancer. The results showed that the Eu metal-organic framework-loaded isoluminol-Au nanoparticles (Eu MOF@Isolu-Au NPs) could generate a strong anodic ECL signal through synergistic interaction; as cathodic luminophore, the composite of carboxyl-functionalized CdS quantum dots and N-doped porous carbon-anchored Cu single-atom catalyst could catalyze H₂O₂ co-reactant to produce a large amount of ^•OH and O₂^•-, making the anodic and cathodic ECL signals significantly increase and become stable. Based on the enhancement strategy, a sandwich immunosensor was constructed for the simultaneous detection of ovarian cancer-associated CA125 and HE4 markers by combining antigen-antibody specific recognition and magnetic separation technique. The resulting ECL immunosensor displayed high sensitivity, a wide linear response range of 0.005∼500 ng mL^-1, and low detection limits of 0.37 and 1.58 pg mL^-1 for CA125 and HE4, respectively. Furthermore, it had excellent selectivity, stability, and practicability in the detection of real serum samples. This work establishes a framework for in-depth design and application of single-atom catalysis in ECL sensing.

Ultrasensitive Electrochemiluminescence Biosensor Based on 2D Co3O4 Nanosheets as a Coreaction Accelerator and Highly Ordered Rolling DNA Nanomachine as a Signal Amplifier for the Detection of MicroRNA

A novel ultrasensitive electrochemiluminescence (ECL) biosensor was constructed using two-dimensional (2D) Co₃O₄ nanosheets as a novel coreaction accelerator of the luminol/H₂O₂ ECL system for the detection of microRNA-21 (miRNA-21). Impressively, coreaction accelerator 2D Co₃O₄ nanosheets with effective mutual conversion of the Co²⁺/Co³⁺ redox pair and abundant active sites could promote the decomposition of coreactant H₂O₂ to generate more superoxide anion radicals (O₂^•-), which reacted with luminol for significantly enhancing ECL signals. Furthermore, the trace target miRNA-21 was transformed into a large number of G-wires through the strand displacement amplification (SDA) process to self-assemble the highly ordered rolling DNA nanomachine (HORDNM), which could tremendously improve the detection sensitivity of biosensors. Hence, on the basis of the novel luminol/H₂O₂/2D Co₃O₄ nanosheet ternary ECL system, the biosensor implemented ultrasensitive detection of miRNA-21 with a detection limit as low as 4.1 aM, which provided a novel strategy to design an effective ECL emitter for ultrasensitive detection of biomarkers for early disease diagnosis.

Cathodic Electrochemiluminesence Microscopy for Imaging of Single Carbon Nanotube and Nucleolin at Single Tumor Cell

Cathodic electrochemiluminesence (ECL) microscopy based on luminol analog L012 was originally established to implement the imaging of a single nanotube and nucleolin on a single tumor cell. This microscopy utilizes multiwalled carbon nanotubes (MWCNTs) as advanced coreactant accelerators to efficiently convert dissolved oxygen (O₂) and H₂O₂ into reactive oxygen species (ROS) due to excellent electrocatalytic properties. The produced ROS could oxide L012 into an excited state of L012 leading to a bright cathodic ECL illumination, thereby promoting ECL imaging of MWCNTs at a low triggering potential. After being modified with AS1411 aptamers, MWCNTs@AS1411 probes were incubated with tumor cells for specific ECL imaging of nucleolin on the plasma membrane, which permits cathodic ECL microscopy for label-free bioassays without ECL tags. The L012-based cathodic ECL microscopy with a moderate operating potential and label-free characteristics provides a universal approach in single nanomaterial and single-cell imaging and analyses.

Addressing the Origin of Single-Atom-Activated Supports Monitored by Electrochemiluminescence

Currently, much attention has been paid to the efforts to stabilize and regulate single atoms through supports to obtain decent electrocatalytic behaviors. However, little concern was given to the effect of single atoms on modulating the electronic structure of supports, despite the catalytic activities and large quantities of supports in the catalytic reactions. Herein, we have localized Ru single atoms onto two-dimensional layered double hydroxide (NiFe-LDH) and studied the role of Ru single atoms in adjusting the electronic structure of the NiFe-LDH support. Spin polarization of 3d electrons for Fe and electron redistribution in NiFe-LDH were effectively modulated through the interaction between Ru single atoms and NiFe-LDH. As a result, the luminol redox reaction and reactive oxygen revolution were simultaneously promoted by Ru single-atom-modulated NiFe-LDH, manifested as boosted electrochemiluminescence (ECL). Therefore, we have provided valid information to reveal the regulation effect of single atoms on the spin state and electronic structure of the supports. It is anticipated that our strategy may arouse wide interest in manipulating single-atom-modulated supports.

Boosting the electrochemiluminescence of luminol by high-intensity focused ultrasound pretreatment combined with 1T/2H MoS2 catalysis to construct a sensitive sensing platform

In the luminol-O₂ ECL system, O₂ as an endogenous coreactant has the advantages of non-toxicity and stability. Improving the efficiency to generate radicals of O₂ is a challenge currently. In this work, a strategy combining physical method - ultrasound and nanomaterial with unique physicochemical properties was designed to enhance the ECL signal of luminol-O₂ system. Specifically, high-intensity focused ultrasound (HIFU) pretreatment as a non-invasive method could generate ROS (H₂O₂, O₂^•-, OH•, ¹O₂) in situ, triggering and boosting the ECL signal of luminol. In addition, 1T/2H MoS₂ with excellent catalytic activity could catalyze the H₂O₂ produced in situ, accelerate the oxidation of luminol and further enhance the ECL response. At the same time, combined with the catalytic hairpin assembly (CHA) reaction, the constructed ECL biosensing platform showed excellent performance for the detection of miRNA-155. The concentration range of 0.1 fM ∼ 1 nM with the detection limit as low as 0.057 fM were obtained. Furthermore, the ECL biosensor was also successfully applied to the determination of miRNA-155 in human serum samples. The established ECL sensing platform opens up a promising method for the detection of clinical biomarkers.

Voltammetric Study and Modeling of the Electrochemical Oxidation Process and the Adsorption Effects of Luminol and Luminol Derivatives on Glassy Carbon Electrodes

Luminol is one of the most widely used electrochemiluminescence (ECL) reagents, yet the detailed mechanism and kinetics of the electrochemical oxidation of luminol remain unclear. We propose a model that describes the electrochemical oxidation of luminol as multiple electron transfer reactions followed by an irreversible chemical reaction, and we applied a finite element method simulation to analyze the electron transfer kinetics in alkaline solutions. Although negligible at higher pH values, the adsorption of luminol on the glassy carbon electrode became noticeable in a solution with pH = 12. Additionally, various types of adsorption behaviors were observed for luminol derivatives and analogues, indicating that the molecular structure affected not only the oxidation but also the adsorption process. The adsorption effect was analyzed through a model with a Langmuir isotherm to show that the saturated surface concentration as well as the reaction kinetics increased with decreasing pH, suggesting a competition for the active sites between the molecule and OH^-. Moreover, we show that the ECL intensity could be boosted through the adsorption effect by collecting the ECL intensity generated through the electrochemical oxidation of luminol and a luminol analogue, L012, in a solution with pH = 13. In contrast with luminol, a significant adsorption effect was observed for L012 at pH = 13, and the ECL intensity was enhanced by the adsorbed species, especially at higher scan rates. The magnitude of the enhancement of the ECL intensity matched well with the simulation using our model.

Gold nanoparticle-based signal amplified electrochemiluminescence for biosensing applications

Since the content levels of biomarkers at the early stage of many diseases are generally lower than the detection threshold concentration, achieving ultrasensitive and accurate detection of these biomarkers is still one of the major goals in bio-analysis. To achieve ultrasensitive and reliable bioassay, it requires developing highly sensitive biosensors. Among all kinds of biosensors, electrogenerated chemiluminescence (ECL) based biosensors have attracted enormous attention due to their excellent properties. In order to improve the performance of ECL biosensors, gold nanoparticles (Au NPs) have been widely utilized as signal amplification tags. The introduction of Au NPs could dramatically enhance the performance of the constructed ECL biosensors via diverse ways such as electrode modification material, efficient energy acceptor in ECL resonant energy transfer (ECL-RET), reaction catalyst, surface plasmon resonance (SPR) enhancer, and as nanocarrier. Herein, we summarize recent developments and progress of ECL biosensors based on Au NPs signal amplification strategies. We will cover ECL applications of Au NPs as a signal amplification tag in the detection of proteins, metal ions, nucleic acids, small molecules, living cells, exosomes, and cell imaging. Finally, brief summary and future outlooks of this field will be presented.

Identifying Luminol Electrochemiluminescence at the Cathode via Single-Atom Catalysts Tuned Oxygen Reduction Reaction

Luminol-based electrochemiluminescence (ECL) can be readily excited by various reactive oxygen species (ROS) electrogenerated with an oxygen reduction reaction (ORR). However, the multiple active intermediates involved in the ORR catalyzed with complex nanomaterials lead to recognizing the role of ROS still elusive. Moreover, suffering from the absence of the direct electrochemical oxidation of luminol at the cathode and poor transformation efficiency of O₂ to ROS, the weak cathodic ECL emission of luminol is often neglected. Herein, owing to the tunable coordination environment and structure-dependent catalytic feature, single-atom catalysts (SACs) are employed to uncover the relationship between the intrinsic ORR activity and ECL behavior. Interestingly, the traditionally negligible cathodic ECL of luminol is first boosted (ca. 70-fold) owing to the combination of electrochemical ORR catalyzed via SACs and chemical oxidation of luminol. The boosted cathodic ECL emission exhibits electron-transfer pathway-dependent response by adjusting the surrounding environment of the center metal atoms in a controlled way to selectively produce different active intermediates. This work bridges the relationship between ORR performance and ECL behavior, which will guide the development of an amplified sensing platform through rational tailoring of the ORR activity of SACs and potential-resolved ECL assays based on the high-efficiency cathodic ECL reported.

Ag-O-Co Interface Modulation-Amplified Luminol Cathodic Electrogenerated Chemiluminescence

It remains a great challenge to develop effective strategies for improving the weak cathodic electrogenerated chemiluminescence (ECL) of the luminol-dissolved O₂ system. Interface modulation between metal and supports is an attractive strategy to improve oxygen reduction reaction (ORR) activity. Therefore, the design of electrocatalysts via interface modulation would provide new opportunities for the ECL amplification involving reactive oxygen species (ROSs). Herein, we have fabricated an Ag single-atom catalyst with an oxygen-bridged interface (Ag-O-Co) through the electrodeposition of Ag on a CoAl layered double hydroxide (LDH) modified indium tin oxide (ITO) electrode (Ag^s/LDH/ITO). Interestingly, it was found that the cathodic ECL intensity of the luminol-dissolved O₂ system at the Ag^s/LDH/ITO electrode was extraordinarily enhanced in comparison with those at bare ITO and other Ag nanoparticle-based electrodes. The enhanced ECL performances of the Ag^s/LDH/ITO electrode were attributed to the increasing amounts of ROSs by electrocatalytic ORR in the Ag-O-Co interface. The electron redistribution of Ag and Co bimetallic sites could accelerate electron transfer, promote the adsorption of O₂, and sufficiently activate O₂ through a four-electron reaction pathway. Finally, the luminol cathodic ECL intensity was greatly improved. Our findings can provide inspiration for revealing the interface effects between metal and supports, and open up a new avenue to improve the luminol cathodic ECL.