Paper-Based Flow Sensor for the Detection of Hyaluronidase via an Enzyme Hydrolysis-Induced Viscosity Change in a Polymer Solution

Capillary Flow-Based One-Minute Quantification of Amyloid Proteolysis

Quantifying the formation and decomposition of amyloid is a crucial issue in the development of new drugs and therapies for treating amyloidosis. The current technologies for grasping amyloid formation and decomposition include fluorescence analysis using thioflavin-T, secondary structure analysis using circular dichroism, and image analysis using atomic force microscopy or transmission electron microscopy. These technologies typically require spectroscopic devices or expensive nanoscale imaging equipment and involve lengthy analysis, which limits the rapid screening of amyloid-degrading drugs. In this study, we introduce a technology for rapidly assessing amyloid decomposition using capillary flow-based paper (CFP). Amyloid solutions exhibit gel-like physical properties due to insoluble denatured polymers, resulting in a shorter flow distance on CFP compared to pure water. Experimental conditions were established to consistently control the flow distance based on a hen-egg-white lysozyme amyloid solution. It was confirmed that as amyloid is decomposed by trypsin, the flow distance increases on the CFP. Our method is highly useful for detecting changes in the gel properties of amyloid solutions within a minute, and we anticipate its use in the rapid, large-scale screening of anti-amyloid agents in the future.

Detection of H2O2 and catalase on a paper-based flow sensor constructed with borate cross-linked PVA hydrogel

The detections of H2O2 and catalase play an important role in daily life. This study introduces a paper-based flow sensor that is specifically designed to detect H2O2 and catalase. The sensor utilizes a hydrogel composed of cross-linked 4-carboxyphenylboronic acid and polyvinyl alcohol. When H2O2 is in contact with the hydrogel, the B-C bonds of the hydrogel undergo a reactive process, causing decomposition of the hydrogel. The pH indicator strip enables the visual monitoring of the viscosity change that occurs during the gel-sol transition. The quantification of H2O2 is accomplished by assessing the proportion of water coverage on the pH indicator strip. The sensor shows a detection limit of 0.077 wt% and is applicable for the quantitative measurement of H2O2 in routinely used disinfectants. Furthermore, the presence of catalase is effectively identified and the detection of catalase in milk is successfully fulfilled. In summary, this work proposes a simple, user-friendly, label-free, and cost-effective method for constructing a paper-based flow sensor using borate cross-linked polyvinyl alcohol hydrogel, showing great potential for detecting H2O2 and catalase in various practical scenarios.

Applications of Biosensors in Bladder Cancer

Bladder cancer (BC) is the tenth most common cancer globally, predominantly affecting men. Early detection and treatment are crucial due to high recurrence rates and poor prognosis for advanced stages. Traditional diagnostic methods like cystoscopy and imaging have limitations, leading to the exploration of noninvasive methods such as liquid biopsy. This review highlights the application of biosensors in BC, including electrochemical and optical sensors for detecting tumor markers like proteins, nucleic acids, and other biomolecules, noting their clinical relevance. Emerging therapeutic approaches, such as antibody-drug conjugates, targeted therapy, immunotherapy, and gene therapy, are also explored, the role of biosensors in detecting corresponding biomarkers to guide these treatments is examined. Finally, the review addresses the current challenges and future directions for biosensor applications in BC, highlighting the need for large-scale clinical trials and the integration of advanced technologies like deep learning to enhance diagnostic accuracy and treatment efficacy.

Photothermal hydrogel-integrated paper-based point-of-care platform for visible distance-readout of glucose

BACKGROUND

The accurate detection of glucose and cholesterol plays a pivotal role in disease diagnosis and home care. To this end, biochemical analyzers have become extensively utilized tools for measuring disease biomarkers. Nonetheless, their poor portability and high cost have restricted their accessibility, limiting their use to laboratory settings and hindering the adoption of point-of-care testing (POCT). In contrast, the emergence of portable and affordable paper-based testing platform has revolutionized diagnostic testing by providing distance signals, enhancing intuitiveness and visual accessibility. Consequently, these platforms have become increasingly suitable for POCT.

RESULTS

We have developed a POCT platform that integrated AuNS@Ag, stimulus-responsive hydrogel and test strips, enabling visual distance reading of glucose. The silver-coated AuNS and enzyme were encapsulated within a temperature-responsive N-isopropylacrylamide-acrylamide (NIPAM-AcAm) hydrogel to act as target recognition and reaction units respectively. Glucose can diffuse freely within the hydrogel porous matrix, thereby instigating enzyme-catalyzed reaction that induce alterations in the photothermal effect of the system. This dynamic process ensures efficient and responsive modulation of the system's photothermal properties. By ingeniously capturing distance signals induced by the photothermal effect-mediated water release the visualization and quantification of target substances are achieved, with a linear range spanning from 0 to 30 mM. The consistency between distance-based POCT platform and commercial blood glucose meter demonstrates that the platform provides a portable, affordable and reliable method for visual reading biomarkers.

SIGNIFICANCE

The proposed strategy enables direct, visual quantitative analysis of the target without the need for additional analytical instruments. Particularly, this method holds significant promise as an efficient platform for cholesterol and other disease markers measurement.

Development of the viscosity biosensor for the detection of DNase I based on the flow distance on the paper with DNA mucus

Deoxyribonuclease I (DNase I) is a biomarker which has important applications in various biological processes. Thus, it is highly important to develop a user-friendly method for the detection of DNase I. Here, we present a paper-based distance sensor for the rapid detection of DNase I based on changes in the viscosity of DNA mucus. The viscosity of DNA mucus varies with different concentrations of DNase I, showing different water flow lengths on the pH test papers, this makes the quantification of DNase I possible. This method has a wide linear range (0.01-10 U/mL), excellent sensitivity, remarkable specificity and excellent reproducibility. The detection limit reaches 0.003 U/mL. Additionally, it can be well applied to detection of DNase I inhibitors, assay of DNase I in human serum and quality evaluation of nucleic acid scavengers. In general, this study offers a brief, convenient, label-free, and economical method to construct paper-based distance sensors using DNA mucus, which is very promising in the detection of DNase I in various applications.

Photocurrent Polarity Switchable Sensing of Hyaluronidase Activity by Regulating Electrostatic Interactions between Two Semiconductors

Photocurrent polarity switchable photoelectrochemical (PEC) sensing has superior accuracy and anti-interference ability to conventional PEC sensing. The development of a novel strategy for photocurrent polarity switchable sensing is of great interest. Herein, a novel strategy for photocurrent polarity switchable sensing is reported by regulating electrostatic interactions between two semiconductor photoactive materials. Hyaluronic acid (HA)-modified CuO nanosheets show a negatively charged surface, which prevents the attachment of CuO nanosheets to negatively charged CdS nanodendrite-modified photoelectrodes because of the strong electrostatic repulsion. In the presence of hyaluronidase (HAase), the specific hydrolysis of HA on the surface of CuO by HAase can yield a positively charged surface, so CuO can be attached to a CdS-modified photoelectrode via electrostatic attraction, leading to photocurrent polarity switching. The photocurrent polarity switchable detection of HAase activity is achieved with an ultralow detection limit of 2 × 10-3 U mL-1 and a wide linear detection range between 0.01 and 100 U mL-1. This work provides a new and effective photocurrent polarity switching strategy for PEC sensing and a simple and efficient method for detecting HAase activity.

Naked-Eye Readout Distance Quantitative Lateral Flow Assay Based on the Permeability Changes of Enzyme-Catalyzed Hydrogelation

Traditional lateral flow assay (LFA) is restricted to providing qualitative or semi-quantitative results and often requires special equipment for obtaining quantitative results. Herein, we proposed a naked-eye readout distance quantitative lateral flow assay based on the permeability changes in enzyme-catalyzed hydrogelation, which not only has the advantages of being simple, immediate, of high efficiency and low cost, and accurate in quantification but also avoids the use of special equipment. The developed LFA method includes three principal components of a nitrocellulose (NC) membrane containing a control line (C line) loading goat anti-rabbit (GAR) antibodies and a test line (T line) loading specific antibodies, alginate-tyramine conjugates forming a hydrogel in the presence of hydrogen peroxide (H₂O₂) and horseradish peroxidase (HRP), and the HRP-AuNPs-Ab probe only labeling targets captured on the T line. Hemoglobin A1c (HbA1c) was chosen as a representative example to demonstrate the feasibility of our method. Under the optimal conditions, the developed LFA method shows excellent performance in standard samples and real human blood samples where the results of real human blood samples show a high linear correlation with the clinical data obtained by ion exchange chromatography (R² = 0.9929) and the margin of recovery is only 3.8%. All results demonstrated that our developed LFA method not only has enormous potential in the quantitative detection of HbA1c in clinical complex samples but also can serve as a versatile method for highly efficient detection of other target biomolecules due to the fungibility of antibodies.

Clarity improvement of the discoloration boundary and detection of Hg2+ ions by using a polystyrene nanoparticle-modified paper-based microdevice

Distance-based microfluidic paper-based analytical devices (μPADs) can be used to calculate the analyte content by reading the length of the discolored area in the channel. A blurred discoloration boundary is difficult to distinguish, resulting in reading errors. In this study, we constructed a μPAD modified with carboxyl-containing polystyrene nanoparticles (PS-μPAD) to improve the discoloration-boundary clarity. The filling of the pores of the fibers with the deposited polystyrene nanoparticles (PS NPs) caused a decrease in the paper porosity, resulting in a flow delay. Meanwhile, the carboxyl groups carried by PS NPs were able to form hydrogen bonds with hydroxyl-containing compounds FLPI, a Hg²⁺ probe, and the two factors acted synergistically to fix the FLPI to react in situ, raising the discoloration-boundary clarity. Compared with the unmodified μPAD, the detection of Hg²⁺ ions using the PS-μPAD still had a good linear relationship. Importantly, the color-depth difference inside and outside the discoloration boundary improved by about four times and showed excellent reproducibility in different populations. The method was simple and easy to expand, thereby providing an idea for more widespread application of distance-based μPADs.

On-site bioaerosol sampling and detection in microfluidic platforms

As the recent coronavirus disease (COVID-19) pandemic and several severe illnesses such as Middle East respiratory syndrome coronavirus (MERS-CoV), Influenza A virus (IAV) flu, and severe acute respiratory syndrome (SARS) have been found to be airborne, the importance of monitoring bioaerosols for the control and prevention of airborne epidemic diseases outbreaks is increasing. However, current aerosol collection and detection technologies may be limited to on-field use for real-time monitoring because of the relatively low concentrations of targeted bioaerosols in air samples. Microfluidic devices have been used as lab-on-a-chip platforms and exhibit outstanding capabilities in airborne particulate collection, sample processing, and target molecule analysis, thereby highlighting their potential for on-site bioaerosol monitoring. This review discusses the measurement of airborne microorganisms from air samples, including sources and transmission of bioaerosols, sampling strategies, and analytical methodologies. Recent advancements in microfluidic platforms have focused on bioaerosol sample preparation strategies, such as sorting, concentrating, and extracting, as well as rapid and field-deployable detection methods for analytes on microfluidic chips. Furthermore, we discuss an integrated platform for on-site bioaerosol analyses. We believe that our review significantly contributes to the literature as it assists in bridging the knowledge gaps in bioaerosol monitoring using microfluidic platforms.

Paper-Based Distance Sensor for the Detection of Lipase via a Phase Separation-Induced Viscosity Change

Human pancreatic lipase is a symbolic biomarker for the diagnosis of acute pancreatitis, which has profound significance for clinical detection and disease treatment. Herein, we first demonstrate a paper-based lipase sensor via a phase separation-induced viscosity change. Lipase catalyzes triolein to produce oleic acid and glycerol. Adding an excess of Ca²⁺ produces calcium oleate. The remaining Ca²⁺ binds with sodium alginate, triggering hydrogelation with an "egg-box" structure. The viscosity change of the aqueous solution induced by the phase separation process can be quantified by measuring the solution flow distance on a pH test paper. The paper-based lipase sensor has high sensitivity with a detection limit of 0.052 U/mL and also shows excellent specificity. Additionally, it is also utilized for quantitative lipase analysis in human serum samples to exhibit its potency in acute pancreatitis detection. This method overcomes the drawbacks of low sensitivity, slow response, and poor reproducibility caused by the nonuniform distribution of the highly viscous hydrogel on the sensing interface in existing approaches. In conclusion, thanks to the prominent characteristics of high portability, low cost, and easy operation, it is prospective for simple quantitative detection of lipase and has great potential for commercialization.

Metal-Organic Framework UiO-66-Mediated Dual-Signal Ratiometric Electrochemical Sensor for microRNA Detection with DNA Walker Amplification

Electrochemical nanotags with strong signal input are necessary for a ratiometric electrochemical sensor to overcome the drawbacks of inaccurate detection results. In this paper, the metal-organic framework (MOF) UiO-66 was utilized as an electrochemical signal tag. A stable and strong current response at +0.9 V can be detected in neutral conditions. MicroRNA (miRNA) was employed as the model analyte. Herein, an enzyme-free DNA-walker-based ultrasensitive ratiometric electrochemical biosensor in combination with Zr MOF (UiO-66) signal tags to detect miRNA was demonstrated. In the presence of miRNA, the autonomous walker movement can be initiated by miRNA, leading to the release of biotin-modified fragments. Thus, streptavidin-labeled UiO-66 nanomaterials were not bound to the electrode, generating a low signal response of UiO-66 at +0.9 V. However, the current signal of electrolyte solution as reference at +0.2 V was increased due to the enhancement of electrode conductivity. This ratiometic sensor demonstrated high sensitivity, selectivity, and reproducibility. It can eliminate the disturbance of environmental factors and basic electrode characteristics, providing more accurate signals. A limit of detection (LOD) of 0.17 fM was achieved. Moreover, the method was also used to detect miRNA-21 spiked in real serum samples.