Ultrasensitive SERS Analysis of Liquid and Gaseous Putrescine and Cadaverine by a 3D-Rosettelike Nanostructure-Decorated Flexible Porous Substrate

A ratiometric SERS strategy for the prediction of cancer cell proportion and guidance of glioma surgical resection

Rapid and accurate identification of tumor boundaries is critical for the cure of glioma, but it is difficult due to the invasive nature of glioma cells. This paper aimed to explore a rapid diagnostic strategy based on a label-free surface-enhanced Raman scattering (SERS) technique for the quantitative detection of glioma cell proportion intraoperatively. With silver nanoparticles as substrate, an in-depth SERS analysis was performed on simulated clinical samples containing normal brain tissue and different concentrations of patient-derived glioma cells. The results revealed two universal characteristic peaks of 655 and 717 cm-1, which strongly correlated with glioma cell proportion regardless of individual differences. Based on the intensity ratio of the two peaks, a ratiometric SERS strategy for the quantification of glioma cells was established by employing an artificial neuron network model and a polynomial regression model. Such a strategy accurately estimated the proportion of glioma cells in simulated clinical samples (R2 = 0.98) and frozen samples (R2 = 0.85). More importantly, it accurately facilitated the delineation of tumor margins in freshly obtained samples. Taken together, this SERS-based method ensured a rapid and more detailed identification of tumor margins during surgical resection, which could be beneficial for intraoperative decision-making and pathological evaluation.

SERS detection of thiram using a 3D sea cucumber-like composite flexible porous substrate

Nowadays, trace detection of thiram is in urgent demand due to its widespread application in agriculture and significant harmful effects on public health. In this work, a three-dimensional (3D) sea cucumber-like flexible porous surface-enhanced Raman scattering (SERS) substrate composed of a poly(vinylidene fluoride) (PVDF) membrane, ZnO nanorods, gold films, and Ag nanoparticles (Ag/Au/ZnO/P) has been established for the highly sensitive detection of thiram. The substrate takes advantage of the 3D morphology of the Ag/Au/ZnO system on a flexible porous PVDF membrane to produce abundant plasmonic hot spots. Meanwhile, the employment of an AgNPs/Au shell system combined the benefits of both gold and silver metals, thus guaranteeing stable and sensitive detection. With 4-mercaptobenzoic acid (4-MBA) as a probe molecule, the Ag/Au/ZnO/P substrate exhibited excellent linear detection in the range of 10-11-10-5 M, with a correlation coefficient (R2) of 0.99 and an enhancement cofactor of 7.09 × 107. The substrate exhibited excellent uniformity with a related standard deviation (RSD) value of 3.82% and demonstrated high stability during a 15 d-storage test. In addition, the substrate could detect thiram in an aqueous solution at concentrations as low as 10-10 M with excellent selectivity. Meanwhile, thiram on the surface of apple peel could be easily detected by the Ag/Au/ZnO/P substrate with the "paste-and-peel" method in less than 10 s, and the detection limit could be as low as 0.48 ng cm-2. Overall, the remarkable performance of the Ag/Au/ZnO/P SERS substrate demonstrated its great potential for the environmental monitoring of thiram.

Ag Nanoparticles@Au Nanograting Array as a 3D Flexible and Effective Surface-Enhanced Raman Scattering Substrate

Surface-enhanced Raman scattering (SERS) is a powerful analytical technique for chemical identification, but it remains a great challenge to realize the large-scale and well-controlled fabrication of sensitive and repeatable SERS substrates. Here, we report a facile strategy to fabricate centimeter-sized periodic Au nanograting (Au-NG) decorated with well-arranged Ag nanoparticles (Ag-NPs) (denoted as Ag-NPs@Au-NG) as a three-dimensional (3D) flexible hybrid SERS substrate with high sensitivity and good reproducibility. The Au-NG patterns with periodic ridges and grooves are fabricated through nanoimprint lithography by employing a low-cost digital versatile disc (DVD) as a master mold, and the Ag-NPs are assembled by a well-controlled interface self-assembly method without any coupling agents. Multiple coupling electromagnetic field effects are created at the nanogaps between the Ag-NPs and Au-NG patterns, leading to high-density and uniform hot spots throughout the substrate. As a result, the Ag-NPs@Au-NG arrays demonstrate an ultrahigh SERS sensitivity as low as 10-13 M for rhodamine 6G with a high average enhancement factor (EF) of 1.85 × 108 and good signal reproducibility. For practical applications, toxic organic pollutants including crystal violet, thiram, and melamine have been successfully detected with high sensitivity at a low detection limit, showing a good perspective in the rapid detection of toxic organic pollutants.

On-site preparation of sandwich plasmonic coupled SERS tape toward pesticide residue determination on food surface

A sandwich plasmonic coupled surface enhanced Raman spectroscopy (SERS) tape is proposed prepared by peeling the chemical printed silver nanocorals (AgNCs) from Cu sheet with adhesive tape, which can sample targets from food surface and sandwich them between substrates and Cu sheet for SERS detection. The solid-to-solid transformation method for fabricating SERS tapes can effectively avoid the weakening of tape stickiness during the preparation process. The sandwich plasmonic coupled structure of AgNC substrate, targets, and Cu sheet display excellent SERS activity (EF = 1.62 × 107) for sensitive determination of analytes. In addition, due to the high heat conductivity of Cu sheet, the thermal effect of laser irradiation during SERS detection cannot damage the AgNC tapes, which ensures the reproducibility of subsequent quantification. The sandwich plasmonic coupled SERS tape is demonstrated to quantify malachite green (MG) and methyl parathion (MP) with good linear coefficients (> 0.98) by two typical calibration plots under different concentration ranges. The limit of detection (LOD) of the method is 0.17 ng/cm2 and 0.48 μg/cm2 (S/N = 3) for MG and MP. This method can realize the quantitative determination of MP and MG on the surface of fruits and fish scale with recoveries of 93-113%. The satisfactory detection results demonstrate the proposed sandwich plasmonic coupled AgNC tape can be successfully applied to SERS-based point-of-care testing (POCT) for pesticide residue determination, which will provide a new path for designing and constructing SERS tapes.

The release of polypropylene plastic from disposable face masks in different water conditions and their potential toxicity in human cells

Due to their extensive use during and after the COVID-19 pandemic, many disposable face masks are irresponsibly deposited into the water environment, threatening the health of people living nearby. However, the effects of water conditions on the degradation and potential hazards of these masks are generally unclear. This paper entailed the release and cellular toxicity of micro/nano plastics from disposable face masks once discarded in different waters, including soil water, river water, and tap water, with deionized (DI) water as control. At first, polypropylene (PP) was confirmed to be the major component of disposable face masks with Raman and Fourier transform infrared (FTIR) techniques. To monitor the release rate of PP from masks, a silver nanoparticle (AgNP)-based surface-enhanced Raman scattering (SERS) method was established by employing the unique Raman fingerprint of PP at 2882 cm-1. During 30-d incubation in different waters, the release rates of PP, sizes of PP aggregates, length of fibers, and proportions of plastics smaller than 100 nm were in the order of soil water > river water > tap water > DI water. All the obtained PP exhibited significant toxicity in human lung cancer (A549) cells at concentrations of 70 mg/L for 48 h, and the ones obtained in soil water exhibited the most severe damage. Overall, this paper revealed that environmental waters themselves would worsen the adverse effects of disposable face masks, and the key compounds affecting the degradation of masks remain to be clarified. Such information, along with the established methods, could be beneficial in assessing the health risks of disposable face masks in different waters.

Layered double hydroxide nanosheets-built porous film-covered Au nanoarrays as enrichment and enhancement chips for efficient SERS detection of trace styrene

Styrene, a prevalent volatile organic compounds (VOCs), is very harmful to atmosphere and humans. Consequently, the development of efficient detection technologies for styrene is of high importance, which is still in challenge! In this work, we crafted a layered double hydroxide (LDH) porous film-coated gold nanoarray, designed to act as a surface enhanced Raman spectroscopy (SERS) chip for the efficient and portable detection of gaseous styrene. This chip features a covering layer composed of cross-linked LDH nanosheets, notable for their porous structure and high specific surface area. When the covering layer is 100-300 nm in thickness, this composite chip has significant enrichment effect and strong SERS performance to gaseous styrene with a lowest detectable concentration below 1 ppb (4.64 ×10-3 mg/m3), and can response within 10 s, showing the rapid response and high sensitivity. Additionally, the chip has strong anti-interference capabilities and maintains excellent response to styrene, even in mixed benzene-VOCs gases. The exceptional SERS performances of this chip is ascribed to its LDH covering layer-induced styrene-enrichment and structurally-enhanced SERS performances. This study provides a simple route and practical chip for the rapid and ultrasensitive SERS-based detection of gaseous styrene, which is also potentially beneficial for the detection of other gaseous VOCs.

Fabrication of Flexible Pyramid Array as SERS Substrate for Direct Sampling and Reproducible Detection

Rapid extraction and analysis of target molecules from irregular surfaces are in high demand in the field of on-site analysis. Herein, a flexible platform used for surface-enhanced Raman scattering (SERS) based on an ordered polymer pyramid structure with half-imbedded silver nanoparticles (AgNPs) was prepared to address this issue. The fabrication includes the following steps: (1) creating inverted pyramid arrays in silicon substrate, (2) preparing a layer of AgNPs on the surface of the inverted pyramids, and (3) obtaining a substrate with an ordered polymer pyramids array with half-imbedded AgNPs by the molding method. This flexible substrate is capable of rapid extraction via a simple and convenient "paste and peel off" method. In addition, the substrate exhibits great repeatability and good sensitivity thanks to the uniformity and larger surface area of the ordered pyramids. The density of "hot spots" (local electromagnetic field with high intensity) is increased on the structured surface. Semi-imbedding silver particles in the polymer pyramids makes "hot spots" robust on the substrate. In addition, the preprepared silicon template with the inverted pyramids can be reused, which greatly reduces the production cost. With this substrate, we successfully analyzed thiram molecules on the epidermis of apples, cucumbers, and oranges, and the detection limits are 2.4, 3, and 3 ng/cm2, respectively. These results demonstrate the great potential of the substrate for in situ analysis, which can provide reference for the design of ideal SERS substrates.

Gold Nanobipyramid Hotspot Aggregation-Induced Surface-Enhanced Raman Scattering for the Ultrasensitive Detection of miRNA

Herein, a surface-enhanced Raman scattering (SERS) biosensor was constructed by gold nanobipyramid (Au NBP) hotspot aggregation-induced SERS (HAI-SERS) for the ultrasensitive detection of microRNA-221 (miRNA-221). Impressively, compared with single Au NBP, the multiple Au NBPs assembled by tetrahedral DNA nanostructures (TDNs) could increase hotspot aggregation to significantly enhance the SERS signal of Raman molecule methylene blue (MB). Meanwhile, in the aid of Exo-III assisted target cycle amplification and TDNs-induced catalytic hairpin assembly (CHA) amplification, the biosensor could achieve the sensitive detection of miRNA-221 with a linear range of 1 fM-10 nM, and the limit of detection (LOD) was 0.59 fM, which could be used for practical application in MHCC-97L and MCF-7 cell lysates. This work provided a method for hotspot aggregation to enhance SERS for the detection of biomarkers and disease diagnosis.

Scalable fabrication of silver covered polyurethane nanofibers as flexible SERS nanosensors for aflatoxin detection

Flexible surface enhanced Raman spectroscopy (SERS) nanosensors, constructed by integration of plasmonic nanostructures with polymeric substrates, have received increasing research interests for recent decades. When compared to abundant works on optimization of the plasmonic nanostructures, the research involving the influence of polymeric substrates on analytical performance of resultant flexible SESR nanosensors is unexpectedly limited. Herein, the ultra-thin silver layer has been deposited on the electrospun polyurethane (ePU) nanofibrous membranes via vacuum evaporation to prepare the flexible SRES nanosensors. Interestingly, we find that the molecular weight and polydispersion index of synthesized PU play important roles in regulating the fine morphology of electrospun nanofibers, which in turns determine the Raman enhancement of resultant flexible SERS nanosensors. Specifically, the optimized SERS nanosensor, obtained by evaporating 10 nm silver layer on top of nanofibers derived from electrospinning of PU with a weight-average molecular weight of 140,354 and polydispersion index of 1.26, enables label-free detection of the carcinogen of aflatoxin down to 0.1 nM. Thanks to its scalable fabrication and good sensitivity, the current work opens new way for design of cost-effective flexible SERS nanosensors for environmental monitoring and food security applications.

Engineered nanomaterials-based sensing systems for assessing the freshness of meat and aquatic products: A state-of-the-art review

Meat and aquatic products are susceptible to spoilage during distribution, transportation, and storage, increasing the urgency of freshness evaluation. Engineered nanomaterials (ENMs) typically with the diameter in the range of 1-100 nm exhibit fascinating physicochemical properties. ENMs-based sensing systems have received extensive attention for food freshness assessment due to the advantages of being fast, simple, and sensitive. This review focuses on summarizing the recent application of ENMs-based sensing systems for food freshness detection. First, chemical indicators related to the freshness of meat and aquatic products are described. Then, how to apply the ENMs including noble metal nanomaterials, metal oxide nanomaterials, carbon nanomaterials, and metal-organic frameworks for the construction of different sensing systems were described. Besides, the recent advance in ENMs-based colorimetric, fluorescent, electrochemical, and surface-enhanced Raman spectroscopy sensing systems for assessing the freshness of meat and aquatic products were outlined. Finally, the challenges and future research perspectives for the application of ENMs-based sensing systems were discussed. The ENMs-based sensing systems have been demonstrated as effective tools for freshness evaluation. The sensing performance of ENMs employed in different sensing systems depends on their composition, size, shape, and stability of nanoparticles. For the real application of ENMs in food industries, the risks and regulatory issues associated with nanomaterials need to be further considered. With the continuous development of nanomaterials and sensing devices, the ENMs-based sensors are expected to be applied in-field for rapid detection of the freshness of meat and aquatic products in the future.

Prospects for the next generation of artificial enzymes for ensuring the quality of chilled meat: Opportunities and challenges

As living standards rise, the demand for high-quality chilled meat among consumers also grows. Researchers and enterprises have been interested in ensuring the quality of chilled meat in all links of the downstream industry. Nanozyme has shown the potential to address the aforementioned requirements. Reasons and approaches for the application of nanozymes in the freshness assessment or shelf life extension of chilled meat were discussed. The challenges for applying these nanozymes to ensure the quality of chilled meat were also summarized. Finally, this review examined the safety, regulatory status, and consumer attitudes toward nanozymes. This review revealed that the freshness assessment of chilled meat is closely related to mimicking the enzyme activities of nanozymes, whereas the shelf life changes of chilled meat are mostly dependent on the photothermal activities and pseudophotodynamic activities of nanozymes. In contrast, studies regarding the shelf life of chilled meat are more challenging to develop, as excessive heat or reactive oxygen species impair its quality. Notably, meat contains a complex matrix composition that may interact with the nanozyme, reducing its effectiveness. Nanopollution and mass manufacturing are additional obstacles that must be overcome. Therefore, it is vital to choose suitable approaches to ensure meat quality. Furthermore, the safety of nanozymes in meat applications still needs careful consideration owing to their widespread usage.