An Immunosensor Using Electroactive COF as Signal Probe for Electrochemical Detection of Carcinoembryonic Antigen

Signal amplification strategies in photoelectrochemical sensing of carcinoembryonic antigen

Early detection of cancer markers is critical for cancer diagnosis and cancer therapy since these markers may indicate cancer risk, incidence, and disease prognosis. Carcinoembryonic antigen (CEA) is a type of non-specific and broad-spectrum cancer biomarker commonly utilized for early cancer diagnosis. Moreover, it serves as an essential tool to assess the efficacy of cancer treatment and monitor tumor recurrence as well as metastasis, thus garnering significant attention for precise and sensitive CEA detection. In recent years, photoelectrochemical (PEC) techniques have emerged as prominent methods in CEA detection due to the advantages of PEC, such as simple equipment requirements, cost-effectiveness, high sensitivity, low interference from background signals, and easy of instrument miniaturization. Different signal amplification methods have been reported in PEC sensors for CEA analysis. Based on these, this article reviews PEC sensors based on various signal amplification strategies for detection of CEA during the last five years. The advantages and drawbacks of these sensors were discussed, as well as future challenges.

Enhancing CRISPR/Cas-mediated electrochemical detection of nucleic acid using nanoparticle-labeled covalent organic frameworks reporters

Molecular detection of nucleic acid plays an important role in early diagnosis and therapy of disease. Herein, a novel and enhanced electrochemical biosensor was exploited based on target-activated CRISPR/Cas12a system coupling with nanoparticle-labeled covalent organic frameworks (COFs) as signal reporters. Hollow spherical COFs (HCOFs) not only served as the nanocarriers of silver nanoparticles (AgNPs)-DNA conjugates for enhanced signal output but also acted as three-dimensional tracks of CRISPR/Cas12a system to improve the cleavage accessibility and efficiency. The presence of target DNA triggered the trans-cleavage activity of the CRISPR/Cas12a system, which rapidly cleaved the AgNPs-DNA conjugates on HCOFs, resulting in a remarkable decrease of the electrochemical signal. As a proof of concept, the fabricated biosensing platform realized highly sensitive and selective detection of human papillomavirus type 16 (HPV-16) DNA ranging from 100 fM to 1 nM with the detection limit of 57.2 fM. Furthermore, the proposed strategy provided a versatile and high-performance biosensor for the detection of different targets by simple modification of the crRNA protospacer, holding promising applications in disease diagnosis.

Synthesis of flower-like ZnO nanoparticles for label-free point of care detection of carcinoembryonic antigen

In this work, flower-like ZnO nanoparticles (ZnONPs) were synthesized using zinc nitrate (Zn(NO3)2 6H2O) as a precursor with KOH. The morphology of the ZnONPs was controlled by varying the synthesis temperature at 50, 75 and 95 °C. The morphology and structure of ZnONPs were characterized using Scanning Electron Microscopy, and X-Ray Diffraction and Brunauer-Emmett Teller analysis. ZnONPs were successfully synthesized by a simple chemical precipitation method. A synthesis temperature of 75 °C produced the most suitable flower-like ZnONPs, which were combined with graphene nanoplatelets to develop a label-free electrochemical immunosensor for the detection of the colon cancer biomarker carcinoembryonic antigen in human serum. Under optimum conditions, the developed immunosensor showed a linear range of 0.5-10.0 ng mL-1 with a limit of detection of 0.44 ng mL-1. The label-free electrochemical immunosensor exhibited good selectivity, reproducibility, and repeatability, and recoveries were excellent. The immunosensor is used with a Near-Field Communication potentiostat connected to a smartphone to facilitate point-of-care cancer detection in low-resource locations.

Dual-responsive electrochemical immunosensor for CYFRA21-1 detection based on Au/Co Co-loaded 3D ordered macroporous carbon interconnected framework

Cytokeratin 19 fragment antigen 21-1 (CYFRA21-1) is a protein fragment released into the bloodstream during the death of lung epithelial cells, serving as a predictive biomarker in diagnosing non-small cell lung cancer (NSCLC) and need to be accurately detected. Herein, a dual-responsive label-free electrochemical immunosensor was developed based on a three-dimensional ordered interconnecting macroporous carbon skeleton material modified with gold-cobalt nanoparticles (Au/Co NPs-3D MCF) to detect cytokeratin-19 fragment (CYFRA21-1). The three-dimensional ordered interconnect macroporous structure, by providing a high specific surface area and an electrochemically active area, not only enhances the electron transport channel and reduces mass transfer resistance, but also offers a confined region that elevates the collision frequency with the active site. In addition to exhibiting excellent biocompatibility for antibody binding, gold-cobalt nanoparticles contribute significantly to the overall robustness of the immunosensor. By capitalizing on the 3D network structure and collective effect of Au and Co NPs, the Au/Co NPs-3D MCF immunosensors exhibit exceptional response signals in both chronocurrent testing and square-wave voltammetry, allowing for a wide linear response range of 0.0001-100 ng/mL and a low detection limit. Moreover, the constructed immunosensor is capable of detecting CYFRA21-1 in human serum and has the potential for further extension to detect multiple biomarkers. This work opens up new avenues for the construction of other highly selective 3D network immunosensors.

A papain-based colorimetric catalytic sensing system for immunoassay detection of carcinoembryonic antigen

A colorimetric immunoassay was built for determination of carcinoembryonic antigen (CEA) based on papain-based colorimetric catalytic sensing system through the use of glucose oxidase (GOx). In the presence of GOx, glucose was catalytically oxidized to produce H2O2. Through the assistance of papain (as a peroxide mimetic enzyme), the signal came from the oxidative color development of 3,3',5,5'-tetramethylbenzidine (TMB, from colorless to blue) catalyzed by the generated H2O2. Herein, a sandwich-type immunoassay was built based on GOx as labels. As the concentration of CEA increased, more GOx-labeled antibodies specifically associate with target, which leaded to more H2O2 generation. Immediately following this, more TMB were oxidized with the addition of papain. Accordingly, the absorbance increased further. As a result, the concentration of CEA is positively correlated with the change in absorbance of the solution. Under optimal conditions, the CEA concentration was linear in the range of 0.05-20.0 ng/mL, and the limit of detection (LOD) reached 37 pg/mL. The papain-based colorimetric immunoassay also exhibited satisfactory repeatability, stability, and selectivity.

Covalent organic frameworks (COFs) as carrier for improved drug delivery and biosensing applications

Porous organic frameworks (POFs) represent a significant subclass of nanoporous materials in the field of materials science, offering exceptional characteristics for advanced applications. Covalent organic frameworks (COFs), as a novel and intriguing type of porous material, have garnered considerable attention due to their unique design capabilities, diverse nature, and wide-ranging applications. The unique structural features of COFs, such as high surface area, tuneable pore size, and chemical stability, render them highly attractive for various applications, including targeted and controlled drug release, as well as improving the sensitivity and selectivity of electrochemical biosensors. Therefore, it is crucial to comprehend the methods employed in creating COFs with specific properties that can be effectively utilized in biomedical applications. To address this indispensable fact, this review paper commences with a concise summary of the different methods and classifications utilized in synthesizing COFs. Second, it highlights the recent advancements in COFs for drug delivery, including drug carriers as well as the classification of drug delivery systems and biosensing, encompassing drugs, biomacromolecules, small biomolecules and the detection of biomarkers. While exploring the potential of COFs in the biomedical field, it is important to acknowledge the limitations that researchers may encounter, which could impact the practicality of their applications. Third, this paper concludes with a thought-provoking discussion that thoroughly addresses the challenges and opportunities associated with leveraging COFs for biomedical applications. This review paper aims to contribute to the scientific community's understanding of the immense potential of COFs in improving drug delivery systems and enhancing the performance of biosensors in biomedical applications.

Functional Interface for Glycoprotein Sensing: Focusing on Biosensors

Glycosylated proteins or glycoproteins make up a large family of glycoconjugates, and they participate in a variety of fundamental biological events. Glycoproteins have become important biomarkers in the diagnosis and treatment of a number of tumors. Biosensors are quite suitable for glycoprotein detection. The design and fabrication of a functional sensing interface play a crucial role in the biosensor construction to target glycoproteins. The functional interface, particularly receptors, typically determines the key characteristics of a biosensor, such as selectivity and sensitivity. Antibody, peptide, aptamer, boronic acid derivative, lectin, and molecularly imprinted polymer are all capable receptors for glycoprotein recognition, and each of these will be discussed. Most glycoproteins exist in low abundance, thus rendering signal amplification techniques indispensable. Nucleic acid-mediated and nanomaterial-mediated signal amplification for the detection of glycoproteins will be focused on herein. This review aims to highlight these different functional interfaces for glycoprotein sensing.

Optical fiber sensing probe for detecting a carcinoembryonic antigen using a composite sensitive film of PAN nanofiber membrane and gold nanomembrane

An optical fiber sensing probe using a composite sensitive film of polyacrylonitrile (PAN) nanofiber membrane and gold nanomembrane is presented for the detection of a carcinoembryonic antigen (CEA), a biomarker associated with colorectal cancer and other diseases. The probe is based on a tilted fiber Bragg grating (TFBG) with a surface plasmon resonance (SPR) gold nanomembrane and a functionalized polyacrylonitrile (PAN) PAN nanofiber coating that selectively binds to CEA molecules. The performance of the probe is evaluated by measuring the spectral shift of the TFBG resonances as a function of CEA concentration in buffer. The probe exhibits a sensitivity of 0.46 dB/(µg/ml), a low limit of detection of 505.4 ng/mL in buffer, and a good selectivity and reproducibility. The proposed probe offers a simple, cost-effective, and a novel method for CEA detection that can be potentially applied for clinical diagnosis and monitoring of CEA-related diseases.

Yolk shell structured YS-Si@N-doped carbon derived from covalent organic frameworks for enhanced lithium storage

Silicon (Si) has ultra-high theoretical capacity (4200 mAh g-1) and accordingly is widely studied as anode materials for lithium-ion batteries (LIBs). However, its huge volume expansion during charging/discharging is a fatal challenge. The preparation of Si-based composite materials with yolk shell structure is the key to solving the Si volume expansion. Here, N-doped carbon-coated Si nanoparticles (SiNPs) nanocomposites (YS-Si@NC-60) with yolk shell structure derived from covalent organic frameworks (COFs) was prepared. N-doped carbon shells derived from COFs not only maintain the well-ordered nanosized pores of COFs, which facilitates the transport of Li+ to contact with internal SiNPs, but also provide more extra active sites for Li+ storage. Most importantly, the internal void can effectively alleviate the damage effect of SiNPs volume expansion. The obtained YS-Si@NC-60 as a LIBs anode show high cyclic stability and Li+ storage performances. At 0.1 A g-1, the capacity is 1446 mAh g-1 after 110 cycles, and initial coulomb efficiency is as high as 82.2 %. The excellent performance can be attributed to the unique yolk shell structure. This simple and template-free strategy provides a new idea for preparing Si-C nanocomposites with yolk shell structure.

One-step solvent thermal synthesis of 3D networked MOF composites for preparation of an ultrasensitive chemosensor for hydroquinone and catechol

Pharmaceuticals and personal care products (PPCPs) have a significant impact on the environment and human health, due to their sometimes toxic and carcinogenic characteristics. Therefore, an innovative chemosensor was constructed for ultrasensitive determination of two typical PCCPs (hydroquinone (HQ) and catechol (CC)) in several minutes. The homemade chemosensor (UiO-67@GO/MWCNTs) consisted of MOF(UiO-67), graphene oxide (GO), and multi-walled carbon nanotubes (MWCNTs) composites; it was a networked, structurally sparse, porosity-rich, homogeneous octahedral composite, and had ultra-high electrical conductivity, which provided lots of active adsorption sites, promote charge transfer, and enrich lots of molecules to be measured in a few minutes. The prepared electrochemical sensor showed good long-term stability, applicability, reproducibility, and immunity to interference for the determination of HQ and CC, with a wide linear range of response of 5.0 ~ 940 µM for both HQ and CC, and a low limit of detection with satisfactory recoveries. In addition, a new strategy of using MOF composites as the basis for electrochemical determination of organic small molecules was established, and a new platform was constructed for the quantitative determination of organic small molecules in various environmental samples.

Antibody-Protein-Aptamer Electrochemical Biosensor based on Highly Efficient Proximity-Induced DNA Hybridization on Tetrahedral DNA Nanostructure for Sensitive Detection of Insulin-like Growth Factor-1

Herein, an antibody-protein-aptamer electrochemical biosensor was designed by highly efficient proximity-induced DNA hybridization on a tetrahedral DNA nanostructure (TDN) for ultrasensitive detection of human insulin-like growth factor-1 (IGF-1). Impressively, the IGF-1 antibody immobilized on the top vertex of the TDN could effectively capture the target protein with less steric effect, and the ferrocene-labeled signal probe (SP) bound on the bottom vertex of the TDN was close to the electrode surface for generating a strong initial signal. In the presence of target protein IGF-1 and an aptamer strand, an antibody-protein-aptamer sandwich could be formed on the top vertex of TDN, which would trigger proximity-induced DNA hybridization to release the SP on the bottom vertex of TDN; therefore, the signal response would decrease dramatically, enhancing the sensitivity of the biosensor. As a result, the linear range of the proposed biosensor for target IGF-1 was 1 fM to 1 nM with the limit of detection down to 0.47 fM, which was much lower than that of the traditional TDN designs on electrochemical biosensors. Surprisingly, the use of this approach offered an innovative approach for the sensitive detection of biomarkers and illness diagnosis.

Unique three-dimensional ordered macroporous dealloyed gold-silver electrochemical sensing platforms for ultrasensitive mercury(II) monitoring

To address the requirement of ultra-sensitive detection of trace mercury(II) (Hg2+) ions in the environment and food, we developed an electrochemical biosensor with super-sensitivity, extremely high selectivity, and reusability. This biosensor comprised two signal amplification components: a three-dimensional macroporous dealloyed (3DOMD) Au-Ag thin-film electrode and a multifunctional encoded Au@Pt nanocage (APNC). As a platform for immobilized capture DNA (cDNA), a 3DOMD Au-Ag thin film prepared by a dealloying method with an active surface area 4.8 times higher than that of 3D macroporous gold films generated by cyclic voltammetry (CV) with sulfuric acid was capable of increasing the sensing surface area while also strengthening the electron transport capacity of the sensing substrate due to its multilayered multi-porous framework. In the presence of Hg2+, probe DNA (pDNA) could be hybridized with the mismatched capture DNA (cDNA) through stable thymine-Hg2+-thymine (T-Hg2+-T) linkages, connecting thionine-APNC to the electrode surface and utilizing the large specific surface area to accomplish highly sensitive detection of Hg2+. With an extremely low Hg2+ detection limit of 2 pM and a detection range from 0.01 to 1000 nM, this technique opened up a new avenue for the ultrasensitive detection of a wider range of heavy metal ions or biomolecules.

Au/PANI@PtCu-based electrochemical immunosensor for ultrasensitive determination of pro-gastrin-releasing peptide

An ultrasensitive sandwich-type electrochemical immunosensor for pro-gastrin-releasing peptide (ProGRP) detection was constructed based on PtCu nanodendrites functionalized Au/polyaniline nanospheres (Au/PANI@PtCu). The prepared Au/PANI@PtCu nanocomposites not only possessed excellent electro-catalytic activity of H2O2 reduction due to the synergistic effect between the Au/PANI and PtCu NDs but also provided large specific surface area for detection of antibodies (Ab2) immobilization. In addition, Au nanoparticles encapsulated multi-wall carbon nanotubes (AuNPs@MWCNTs) were also applied to modify the glassy carbon electrode interface for loading numerous capture antibodies (Ab1). In the presence of target ProGRP, a sandwich-type electrochemical immunosensor showed a strong current response from the electro-catalysis of Au/PANI@PtCu toward H2O2 reduction. Benefiting from the exceptional electro-catalytic performance of Au/PANI@PtCu and the high conductivity of AuNPs@MWCNTs, the sandwich-type immunoassay exhibited remarkable sensitivity in detection. The linear range extended from 100 fg/mL to 10 ng/mL, while achieving an impressively low limit of detection of 77.62 fg/mL.

Ternary electrochemiluminescence quenching effects of CuFe2O4@PDA-MB towards self-enhanced Ru(dcbpy)32+ functionalized 2D metal-organic layer and application in carcinoembryonic antigen immunosensing

BACKGROUND

Carcinoembryonic antigen (CEA) is a significant glycosylated protein, and the unusual expression of CEA in human serum is used as a tumor marker in the clinical diagnosis of many cancers. Although scientists have reported many ways to detect CEA in recent years, such as electrochemistry, photoelectrochemistry, and fluorescence, their operation is complex and sensitivity is average. Therefore, finding a convenient method to accurately detect CEA is significance for the prevention of malignant tumors. With high sensitivity, quick reaction, and low background, electrochemiluminescence (ECL) has emerged as an essential method for the detection of tumor markers in blood.

RESULTS

In this work, a "signal on-off" ECL immunosensor for sensitive analysis of CEA ground on the ternary extinction effects of CuFe2O4@PDA-MB towards a self-enhanced Ru(dcbpy)32+ functionalized metal-organic layer [(Hf)MOL-Ru-PEI-Pd] was prepared. The high ECL efficiency of (Hf)MOL-Ru-PEI-Pd originated from the dual intramolecular self-catalysis, including intramolecular co-reaction between polyethylenimine (PEI) and Ru(dcbpy)32+. At the same time, loading Pd NPs onto (Hf)MOL-Ru-PEI could not only improve the electron transfer ability of (Hf)MOL-Ru-PEI, but also provide more active sites for the reaction of Ru(dcbpy)32+ and PEI. In the presence of CEA, CuFe2O4@PDA-MB-Ab2 efficiently quenches the excited states of (Hf)MOL-Ru-PEI-Pd by PDA, Cu2+, and methylene blue (MB) via energy and electron transfer, leading to an ECL signal decrease. Under optimal conditions, the proposed CEA sensing strategy showed satisfactory properties ranging from 0.1 pg mL-1 to 100 ng mL-1 with a detection limit of 20 fg mL-1.

SIGNIFICANCE

The (Hf)MOL-Ru-PEI-Pd and CuFe2O4@PDA-MB were prepared in this work might open up innovative directions to synthesize luminescence-functionalized MOLs and effective quencher. Besides, the ECL quenching mechanism of Ru(dcbpy)32+ by MB was successfully explained by the inner filter effect (ECL-IFE). At last, the proposed immunosensor exhibits excellent repeatability, stability, and selectivity, and may provide an attractive way for CEA and other disease markers determination.

Enzyme-catalyzed electrochemical aptasensor for ultrasensitive detection of soluble PD-L1 in breast cancer based on decorated covalent organic frameworks and carbon nanotubes

BACKGROUND

Soluble programmed death-ligand 1 (sPD-L1) is critically involved in breast cancer recurrence and metastasis. However, the clinical application of highly sensitive sPD-L1 assays remains a challenge due to its low abundance in peripheral blood. To address this issue, for the first time, an enzyme-catalyzed electrochemical aptasensing platform was devised, incorporating covalent organic frameworks-gold nanoparticles-antibody-horseradish peroxidase (COFs-AuNPs-Ab-HRP) and polyethyleneimine-functionalized multiwalled carbon nanotubes (MWCNTs-PEI-AuNPs) for the highly specific and ultrasensitive detection of sPD-L1.

RESULTS

MWCNTs-PEI-AuNPs possessed an extensive specific surface area and exhibited excellent electrical conductivity, facilitating the immobilization of aptamer and amplifying the signal. COFs modified with AuNPs not only amplified the electrical signal but also proffered a loading platform for the Ab and HRP. The favorable biocompatibility of COFs contributed to the preservation of enzyme activity and stability. HRP acted in synergy with hydrogen peroxide (H2O2) to catalyze the oxidation of hydroquinone (HQ) to benzoquinone (BQ). Subsequently, BQ underwent electrochemical reduction to HQ, inducing an enzymatic redox cycle that amplified the electrochemical signal and enhanced the sensitivity and selectivity of the detection method. The developed aptasensor displayed a liner range for sPD-L1 identification from 1 pg mL-1 to 100 ng mL-1 and the detection limit reached 0.143 pg mL-1 (S/N = 3).

SIGNIFICANCE

Paving the way for clinical application, this strategy detected differences in sPD-L1 in cell supernatants and peripheral blood of breast cancer patients with higher sensitivity compared to commercial sPD-L1 ELISA kit. This work demonstrates significant potential in offering reference information for early diagnosis and disease surveillance of breast cancer.

Sensitive sensing of Hg(II) based on lattice B and surface F co-doped CeO2: Synergies of catalysis and adsorption brought by doping site engineering

Transition metal oxides are widely used in the detection of heavy metal ions (HMIs), and the co-doping strategy that introducing a variety of different dopant atoms to modify them can obtain a better detection performance. However, there is very little research on the co-doped transition metal oxides by non-metallic elements for electrochemical detection. Herein, boron (B) and fluorine (F) co-doped CeO2 nanomaterial (BFC) is constructed to serve as the electrochemically sensitive interface for the detection of Hg(II). B and F affect the sensitivity of CeO2 to HMIs when they were introduced at different doping sites. Through a variety of characterization, it is proved that B is successfully doped into the lattice and F is doped on the surface of the material. Through the improvement of the catalytic properties and adsorption capacity of CeO2 by different doping sites, this B and F co-doped CeO2 exhibits excellent square wave anodic stripping voltammetry (SWASV) current responses to Hg(II). Both the high sensitivity of 906.99 μA μM-1 cm-2 and the low limit of detection (LOD) of 0.006 μM are satisfactory. Besides, this BFC glassy carbon electrode (GCE) also has good anti-interference property, which has been successfully used in the detection of Hg(II) in actual water. This discovery provides a useful strategy for designing a variety of non-metallic co-doped transition metal oxides to construct trace heavy metal ion-sensitive interfaces.

Proximity Amplification-Enabled Electrochemical Analysis of Tumor-Associated Glycoprotein Biomarkers

Glycoproteins produced and secreted from specific cells and tissues are associated with several diseases and emerge as typical biomarkers to provide useful information in cancer diagnosis considering their abnormal expression levels. In this work, we design a universal method to achieve the accurate and sensitive analysis of tumor-associated glycoprotein biomarkers based on both carbohydrate recognition and protein recognition at the same protein surface. The byproduct of dual recognition-induced proximity amplification, pyrophosphate, triggers the disassembly of methylene blue-encapsulated metal-organic frameworks, MB@ZIF-90. As a result, methylene blue molecules are released to arouse amplified electrochemical responses for glycoprotein analysis. Experimental results demonstrate the high-accuracy analysis of carcinoembryonic antigen, a typical glycoprotein biomarker in cancer diagnosis, in a linear range of 0.001-100 ng mL-1 with a low limit of detection of 0.419 pg mL-1. The method also displays satisfactory specificity and recoveries in complex serum samples and proves good versatility by adopting two other tumor-associated glycoprotein biomarkers, α-fetoprotein and mucin-1, as the targets. Therefore, this work provides a valuable tool for the analysis of glycoprotein biomarkers, which may be of great potential in early warning of malignant tumors in clinical applications.

Immunosensing of neuron-specific enolase based on signal amplification strategies via catalysis of ascorbic acid by heteropolysate COF

In view of the importance of quantification of neuron-specific enolase (NSE), an electrochemical NSE immunosensor was developed. The sandwich voltammetric immunosensor utilized vinyl-functionalized crystalline covalent organic framework (COFTAPT-Dva) modified electrode to load lots of Ab1 via thiol-ene "click" reaction as matrix. A crystalline cationic EB-COF:Br was used to load Au nanoparticles (AuNPs) and H3[PMo12O40] (PMo12) as immunoprobe. The AuNPs with the size of about 30 nm were firstly grown on EB-COF:Br and then a large number of electroactive PMo12 were uniformly assembled on AuNPs/EB-COF:Br via ion exchanging reaction. The AuNPs not only facilitated the bonding of Ab2 based on Au-S bond, but also improved performance of Ab2/AuNPs/EB-COF:PMo12 immunoprobe. The sensitivity of sandwich electrochemical immunosensor could be primarily amplified based on loaded abundant PMo12. Secondary sensitivity amplification of immunosensor could be achieved by using PMo12 to catalyze ascorbic acid. The linear range of sandwich voltammetric immunosensor based on current change of differential pulse voltammetry is 500 ± 36 fg mL-1 - 100 ± 8 ng mL-1. Thanks to the dual sensitivity amplification strategy, the sensitivity is as high as 54.06 ± 3.2 μA cm-2/lg(cNSE/ng mL-1), and the detection limit is as low as 166 ± 10.8 fg mL-1. It proves that it is completely feasible to amplify sensitivity of sandwich voltammetric immunosensors using polyoxometalate-COF and its catalytic substrate.

Assessing CO2 Adsorption Behavior onto Free-Standing, Flexible Organic Framework-PVDF Composite Membrane: An Empirical Modeling and Validation of an Experimental Data Set

Covalent organic framework (COF) materials have greatly expanded their range in a variety of applications since the cognitive goal of a highly organized and durable adsorbent is quite rational. The characteristics of a conjugated organic framework are combined with an industrially relevant polymer to produce a composite membrane optimized for selectively adsorbing carbon dioxide (CO2) gas across a wide temperature range. Additionally, treatment of the composite membrane with cold atmospheric plasma (CAP) that specifically enhanced the parent membrane's surface area by 36% is established. Following CAP treatment, the membrane accelerates the CO2 uptake by as much as 66%. This is primarily due to a Lewis acid-base interaction between the electron-deficient carbon atom of CO2 and the newly acquired functionalities on the COFs@PVDF membrane's surface. In particular, the C-N bonds, which appear to be a higher electron density site, play a key role in this interaction. Moreover, the empirical model proposed here has confirmed CO2 adsorption phenomena in the COF@PVDF composite membrane, which closely matches the findings from the experimental data set under designated operating conditions. As a result, the current study may pave the way for future design work as well as refine the covalent framework polymer composite membrane's features, revealing a more sophisticated approach to addressing CO2 capture problems.

A bimetallic metal-organic framework with high enzyme-mimicking activity for an integrated electrochemical immunoassay of carcinoembryonic antigen

Metal-organic frameworks (MOFs) show excellent catalytic activity and have been widely applied in diagnosis of diseases and tumors. However, current assay methods usually involve cumbersome configurations and complicated procedures, which inhibit their practical applications. Hence, a Cu-Ni MOF/carbon printed electrode (CPE)-based integrated electrochemical immunosensor was constructed for highly sensitive and efficient determination of carcinoembryonic antigen (CEA). First, highly conductive carbon ink was screen-printed onto a polyethylene terephthalate substrate to manufacture a CPE. Afterward, an aminated Cu-Ni MOF was prepared by a typical solvothermal strategy and modified on the CPE. Owing to its excellent peroxidase activity, the Cu-Ni MOF can catalytically oxidize hydroquinone using hydrogen peroxide, which greatly amplifies the peak current signal. Then the formation of an immune complex inhibited the catalytic activity of the MOF, thus enabling the quantitative determination of CEA content with a wide linear range of 0.5 pg mL-1-500 ng mL-1 and a low detection limit of 0.16 pg mL-1. Furthermore, the Cu-Ni MOF/CPE-based integrated portable electrochemical immunosensor also showed satisfactory performance in the detection of CEA in clinical serum samples with excellent accuracy, showing great potential for application in point-of-care disease diagnosis.

Gold nanoparticle-decorated covalent organic frameworks as amplified light-scattering probes for highly sensitive immunodetection of Salmonella in milk

Traditional immunoassays exhibit insufficient screening sensitivity for foodborne pathogens due to their low colorimetric signal intensities. Herein, we propose an ultrasensitive dynamic light scattering (DLS) immunosensor for Salmonella based on a "cargo release-seed growth" strategy enabled by a probe, namely gold nanoparticle-decorated covalent organic frameworks (COF@AuNP). Large amounts of AuNPs in COF@AuNP can be released by acid treatment-induced decomposition of the imine-linked COF, and then they are enlarged via gold growth to generate a dramatically enhanced light-scattering signal, leading to a vast improvement in detection sensitivity. Based on an immunomagnetic microbead carrier, the proposed DLS immunosensor is capable of detecting trace Salmonella in milk in the range of 2.0 × 102-2.0 × 105 CFU mL-1, with a limit of detection of 60 CFU mL-1. The immunosensor also demonstrated excellent selectivity, good accuracy and precision, and high reliability for detecting Salmonella in milk.

Facile preparation of Ru nanoassemblies for electrochemical immunoassay of carcinoembryonic antigen in clinical serum

Abnormal expression of carcinoembryonic antigen (CEA) can be used for early diagnosis of various cancers (e.g. colorectal cancer, cervical carcinomas, and breast cancer). In this work, using l-cysteine-ferrocene-Ruthenium nanocomposites (L-Cys-Fc-Ru) to immobilize secondary antibody (Ab₂) and Au nanoparticles (NPs) as the substrate to ensure accurate capture of primary antibody (Ab₁), a signal-on sandwich-like biosensor was constructed in the presence of CEA. Specifically, Ru nanoassemblies (NAs) were first prepared by a facile one-step solvothermal approach as signal amplifiers for the electrical signal of Fc. Based on specific immune recognition, as the increase of CEA concentration, the content of L-Cys-Fc-Ru-Ab₂ captured on the electrode surface also increased, thus the signal of Fc gradually increased. Therefore, the quantitative detection of CEA can be realized according to the peak current of Fc. After a series of experiments, it was found that the biosensor has a wide detection range from 1.0 pg mL^-1 to 100.0 ng mL^-1 and a low detection limit down to 0.5 pg mL^-1, as well as good selectivity, repeatability and stability. Furthermore, satisfactory results were also obtained for the determination of CEA in serums, which were comparable to commercial electrochemiluminescence (ECL) method. The developed biosensor shows great potential in clinical applications.

Homogeneous Electrochemical Aptamer Sensor Based on Two-Dimensional Nanocomposite Probe and Nanochannel Modified Electrode for Sensitive Detection of Carcinoembryonic Antigen

A rapid and convenient homogeneous aptamer sensor with high sensitivity is highly desirable for the electrochemical detection of tumor biomarkers. In this work, a homogeneous electrochemical aptamer sensor is demonstrated based on a two-dimensional (2D) nanocomposite probe and nanochannel modified electrode, which can realize sensitive detection of carcinoembryonic antigen (CEA). Using π-π stacking and electrostatic interaction, CEA aptamer (Apt) and cationic redox probe (hexaammineruthenium(III), Ru(NH₃)₆³⁺) are co-loaded on graphite oxide (GO), leading to a 2D nanocomposite probe (Ru(NH₃)₆³⁺/Apt@GO). Vertically ordered mesoporous silica-nanochannel film (VMSF) is easily grown on the supporting indium tin oxide (ITO) electrode (VMSF/ITO) using the electrochemical assisted self-assembly (EASA) method within 10 s. The ultrasmall nanochannels of VMSF exhibits electrostatic enrichment towards Ru(NH₃)₆³⁺ and size exclusion towards 2D material. When CEA is added in the Ru(NH₃)₆³⁺/Apt@GO solution, DNA aptamer recognizes and binds to CEA and Ru(NH₃)₆³⁺ releases to the solution, which can be enriched and detected by VMSF/ITO electrodes. Based on this mechanism, CEA can be an electrochemical detection ranging from 60 fg/mL to 100 ng/mL with a limit of detection (LOD) of 14 fg/mL. Detection of CEA in human serum is also realized. The constructed homogeneous detection system does not require the fixation of a recognitive aptamer on the electrode surface or magnetic separation before detection, demonstrating potential applications in rapid, convenient and sensitive electrochemical sensing of tumor biomarkers.

Catalytic hairpin assembly-assisted dual-signal amplification platform for ultrasensitive detection of tumor markers and intelligent diagnosis of gastric cancer

Quantification of extracellular tumor markers has shown great promise for non-invasive cancer diagnosis. Combined detection of multiple tumor markers instead of a single one is valuable for accurate diagnosis. Here, we integrate CRISPR-Cas12a with DNA catalytic hairpin assembly (CHA) to doubly amplify the output signal for detecting microRNA-182 (miR-182), which is overexpressed by gastric cancer patients. Additionally, we develop a CHA system with self-replicating capacity (SRCHA) to realize dual-signal amplification for the detection of carcinoembryonic antigen (CEA), a broad-spectrum tumor marker. The proposed cascade amplification strategies enable ultrasensitive detection of miR-182 and CEA with low LODs of 0.063 fM and 4.8 pg mL^-1, respectively. Moreover, we design a ternary "AND" logic gate using different concentrations of miR-182 and CEA as inputs, which demonstrates intelligent diagnosis of gastric cancer staging with a high accuracy of 93.3% in a clinical cohort of 30 individuals. Overall, our study expands the application of CRISPR-Cas12a in biosensing and provides a new diagnostic strategy for non-invasive liquid biopsy of gastric cancer before resorting to a traumatic tissue biopsy.

Sandwich-type electrochemical immunosensor based on CuFe2O4-Pd for cardiac troponin I detection

A sandwich-type electrochemical immunosensor was designed by highly efficient catalytic cycle amplification strategy of CuFe₂O₄-Pd for sensitive detection of cardiac troponin I. CuFe₂O₄ with coupled variable valence metal elements exhibited favorable catalytic performance through bidirectional cycling of Fe²⁺/Fe³⁺ and Cu⁺/Cu²⁺ redox pairs. More importantly, Cu⁺ acted as the intermediate product of the catalytic reaction, promoted the regeneration of Fe²⁺ and ensured the continuous recycling occurrence of the double redox pairs, and significantly amplified the current signal response. Pd nanoparticles (Pd NPs) loaded on the surface of amino-functionalized CuFe₂O₄ (CuFe₂O₄-NH₂) served as electrochemical mediators to capture labeled antibodies (Ab₂), and also as co-catalysts of CuFe₂O₄ to further enhance the catalytic efficiency, thus improving the sensitivity of the electrochemical immunosensor. Under the optimal experimental conditions, the linear range was 0.001 ~ 100 ng/mL, and the detection limit was 1.91 fg/mL. The electrochemical immunosensor has excellent analytical performance, giving a new impetus for the sensitive detection of cTnI.

Covalent organic framework: A state-of-the-art review of electrochemical sensing applications

Covalent organic framework (COF), a kind of porous polymer with crystalline properties, is a periodic porous framework material with precise regulation at atomic level, which can be formed by the orderly connection of pre-designed organic construction units through covalent bonds. Compared with metal-organic frameworks, COFs exhibit unique performance, including tailor-made functions, stronger load ability, structural diversity, ordered porosity, intrinsic stability and excellent adsorption features, are more conducive to the expansion of electrochemical sensing applications and the universality of applications. In addition, COFs can accurately integrate organic structural units with atomic precision into ordered structures, so that the structural diversity and application of COFs can be greatly enriched by designing new construction units and adopting reasonable functional strategies. In this review, we mainly summarized state-of-the-art recent advances of the classification and synthesis strategy of COFs, the design of functionalized COF for electrochemical sensors and COFs-based electrochemical sensing. Then, an overview of the considerable recent advances made in applying outstanding COFs to establish electrochemical sensing platform, including electrochemical sensor based on voltammetry, amperometry, electrochemical impedance spectroscopy, electrochemiluminescence, photoelectrochemical sensor and others. Finally, we discussed the positive outlooks, critical challenges and bright directions of COFs-based electrochemical sensing in the field of disease diagnosis, environmental monitoring, food safety, drug analysis, etc.

Visual analysis of Alzheimer disease biomarker via low-potential driven bipolar electrode

Developing a simple, economical, and accurate diagnostic method has positive practical significance for the early prevention and intervention of Alzheimer's disease (AD). Herein, combining a closed bipolar electrode (BPE) chip with multicolor electrochemiluminescence (ECL) imaging technology, we constructed a low-voltage driven portable visualized ECL device for the early screening of AD. By introducing parallel resistance, the total resistance of the circuit was greatly reduced. A classical mixture of Ir(ppy)₃ and Ru(bpy)₃²⁺ was used as multicolor emitters of the anode with TPrA as the co-reactant. Capture of amyloid-β (Aβ) through antigen-antibody recognition, and signal amplification by electroactive covalent organic frameworks (COF) probe at the cathode of BPE caused the significantly increased faradaic current. The electrical balance of the BPE system resulted in the change of the emission color from green to red at the anode. The ECL-BPE sensor shows good reproducibility and high sensitivity with detection limit of 1 pM by naked eye. The driving voltage is 3.0 V, which means the chip could be driven by two fifth batteries. The visualized ECL-BPE sensor provides a promising point-of-care testing (POCT) tool for the screening of Alzheimer's-related diseases in the early stage.

Perylene derivative and persulfate as highly efficient electrochemical system for constructing sensitive amperometric aptasensor

To design highly efficient electrochemistry system was important for construct simple and sensitive biosensors, which was crucial in clinical diagnosis and therapy. In this work, a novel electrochemistry probe N,N'-di (1-hydroxyethyl dimethylaminoethyl) perylene diimide (HDPDI) with positive charges was reported to show two-electron redox behavior in neutral phosphate buffer solution between 0 and -1.0 V. And K₂S₂O₈ in solution could significantly increase the reduction current of HDPDI at -0.29 V, which was interpreted with cyclic catalysis mechanism of K₂S₂O₈. Moreover, HDPDI as electrochemical probe and K₂S₂O₈ as signal enhancer was used to design aptasensors for protein detection. Thrombin was used as target model protein. Thiolate ssDNA with thrombin-binding sequence was immobilized on gold electrode to selectively capture thrombin and adsorb HDPDI. The thiolate ssDNA without binding with thrombin was with random coil structure and could adsorb HDPDI through electrostatic attraction interaction. However, the thiolate ssDNA binding with thrombin became G-quadruplex structure and hardly adsorbed HDPDI. Thus, with increasing the concentration of thrombin, the current signal stepwisely decreased and was taken as detection signal. Compared with other aptasensors based on electrochemistry molecules without signal enhancer, the proposed aptasensors exhibited wider linear response for thrombin between 1 pg mL^-1 and 100 ng mL^-1 with lower detection limit 0.13 pg mL^-1. In addition, the proposed aptasensor showed good feasibility in human serum samples.

Covalent Organic Frameworks: Recent Progress in Biomedical Applications

Covalent organic frameworks (COFs) are a type of crystalline organic porous material with specific features and interesting structures, including porosity, large surface area, and biocompatibility. These features enable COFs to be considered as excellent candidates for applications in various fields. Recently, COFs have been widely demonstrated as promising materials for biomedical applications because of their excellent physicochemical properties and ultrathin structures. In this review, we cover the recent progress of COF materials for applications in photodynamic therapy, gene delivery, photothermal therapy, drug delivery, bioimaging, biosensing, and combined therapies. Moreover, the critical challenges and further perspectives with regards to COFs for future biology-facing applications are also discussed.

A fluorescent covalent organic framework for visual detection of p-benzoquinone

P-benzoquinone (PBQ) is toxic and harmful for health. The development of portable sensor to realize the detection of PBQ is of great significance. Herein, a novel covalent organic framework (COF_ML-TFPB) with intramolecular charge transfer and aggregation induced emission properties was proposed via condensation reaction of melem (ML) and 1,3,5-tris (4-formylphenyl) benzene (TFPB). COF_ML-TFPB shows strong fluorescence in both solution and solid state and can be used for the fluorescence detection of PBQ. Due to the internal filtration effect and photoinduced electron transfer effect, PBQ can quench the fluorescence of COF_ML-TFPB. The developed COF_ML-TFPB fluorescent sensor displayed a wide linear range for PBQ from 0.138 ng mL^-1 - 35 μg mL^-1, and the detection limit was 0.046 ng mL^-1. In addition, fluorescent test paper for rapid and portable detection of PBQ was also developed by depositing COF_ML-TFPB on filter paper directly. It reduces the cost and time of detection and realizes the semiquantitative detection of PBQ. Moreover, the fluorescence color was converted into digital RGB value to calculate the concentration of PBQ accurately by a smartphone. This method realizes the portable qualitative and semiquantitative determination of PBQ.

A novel electrochemical immunosensor that amplifies Poly(o-phenylenediamine) signal by pH-driven cascade reaction used for alpha-foetoprotein detection

The present protocol develops an electrochemical immunosensor with poly(o-phenylene diamine) attached gold nanoparticles (PPD@Au NPs) as the immune platform, polydopamine-loaded cobalt ions (Co²⁺-PDA) as the immune probe, and K₂S₂O₈ as the signal amplifying substance with pH-driven cascade reaction. The application of conventional immunosensors often leads to easy leakage of the current signal and increases the impedance due to assembly. However, this new immunosensor offers the following advantages: (1) The signal substance PPD is modified on the electrode surface, effectively reducing the signal loss and leakage of the immunosensor; (2) The pH response reduces the impedance of the immunosensor while destroying the Co²⁺-PDA secondary antibody label; (3) The pH response releases a small amount of Co²⁺, leading to SO₄^-· generation by K₂S₂O₈ through a cascade reaction, further amplifying the PPD response current signal; (4) The pH response generates excess Co²⁺ and the by-product PDA fragments can consume the SO₄^-· generated by K₂S₂O₈, so that the final response signal decreases with the increasing antigen concentration. The experimental results showed that the immunosensor exhibited good selectivity, long-term stability, and reproducibility for AFP detection in the range of 1 pg/mL-100 ng/mL, with a detection limit of 0.214 pg/mL. Interestingly, it is expected to be used for detecting AFP in actual blood samples.

Aluminum(III)-Based Organic Nanofibrous Gels as an Aggregation-Induced Electrochemiluminescence Emitter Combined with a Rigid Triplex DNA Walker as a Signal Magnifier for Ultrasensitive DNA Assay

Due to effective tackling of the problems of aggregation-caused quenching of traditional ECL emitters, aggregation-induced electrochemiluminescence (AIECL) has emerged as a research hotspot in aqueous detection and sensing. However, the existing AIECL emitters still encounter the bottlenecks of low ECL efficiency, poor biocompatibility, and high cost. Herein, aluminum(III)-based organic nanofibrous gels (AOGs) are used as a novel AIECL emitter to construct a rapid and ultrasensitive sensing platform for the detection of Flu A virus biomarker DNA (fDNA) with the assistance of a high-speed and hyper-efficient signal magnifier, a rigid triplex DNA walker (T-DNA walker). The proposed AOGs with three-dimensional (3D) nanofiber morphology are assembled in one step within about 15 s by the ligand 2,2':6',2″-terpyridine-4'-carboxylic acid (TPY-COOH) and cheap metal ion Al³⁺, which demonstrates an efficient ECL response and outstanding biocompatibility. Impressively, on the basis of loop-mediated isothermal amplification-generated hydrogen ions (LAMP-H⁺), the target-induced pH-responsive rigid T-DNA walker overcomes the limitations of conventional single or duplex DNA walkers in walking trajectory and efficiency due to the entanglement and lodging of leg DNA, exhibiting high stability, controllability, and walking efficiency. Therefore, AOGs with excellent AIECL performance were combined with a CG-C⁺ T-DNA nanomachine with high walking efficiency and stability, and the proposed "on-off" ECL biosensor displayed a low detection limit down to 23 ag·μL^-1 for target fDNA. Also, the strategy provided a useful platform for rapid and sensitive monitoring of biomolecules, considerably broadening its potential applications in luminescent molecular devices, clinical diagnosis, and sensing analysis.

A Paper-Based Electrochemical Sensor Based on PtNP/COFTFPB-DHzDS@rGO for Sensitive Detection of Furazolidone

Herein, a paper-based electrochemical sensor based on PtNP/COF_TFPB-DHzDS@rGO was developed for the sensitive detection of furazolidone. A cluster-like covalent organic framework (COF_TFPB-DHzDS) was successfully grown on the surface of amino-functional reduced graphene oxide (rGO-NH₂) to avoid serious self-aggregation, which was further loaded with platinum nanoparticles (PtNPs) with high catalytic activity as nanozyme to obtain PtNP/COF_TFPB-DHzDS@rGO nanocomposites. The morphology of PtNP/COF_TFPB-DHzDS@rGO nanocomposites was characterized, and the results showed that the smooth rGO surface became extremely rough after the modification of COF_TFPB-DHzDS. Meanwhile, ultra-small PtNPs with sizes of around 1 nm were precisely anchored on COF_TFPB-DHzDS to maintain their excellent catalytic activity. The conventional electrodes were used to detect furazolidone and showed a detection limit as low as 5 nM and a linear range from 15 nM to 110 μM. In contrast, the detection limit for the paper-based electrode was 0.23 μM, and the linear range was 0.69-110 μM. The results showed that the paper-based electrode can be used to detect furazolidone. This sensor is a potential candidate for the detection of furazolidone residue in human serum and fish samples.

A Novel Paper-Based Electrochemical Biosensor Based on N,O-Rich Covalent Organic Frameworks for Carbaryl Detection

A new N,O-rich covalent organic framework (COF_DHNDA-BTH) was synthesized by an amine-aldehyde condensation reaction between 2,6-dialdehyde-1,5-dihydroxynaphthalene (DHNDA) and 1,3,5-phenyltriformylhydrazine (BTH) for carbaryl detection. The free NH, OH, and C=O groups of COF_DHNDA-BTH not only covalently couples with acetylcholinesterase (AChE) into the pores of COF_DHNDA-BTH, but also greatly improves the catalytic activity of AChE in the constrained environment of COF_DHNDA-BTH's pore. Under the catalysis of AChE, the acetylthiocholine (ATCl) was decomposed into positively charged thiocholine (TCl), which was captured on the COF_DHNDA-BTH modified electrode. The positive charges of TCl can attract anionic probe [Fe(CN)₆]^3-/4- on the COF_DHNDA-BTH-modified electrode to show a good oxidation peak at 0.25 V (versus a saturated calomel electrode). The carbaryl detection can inhibit the activity of AChE, resulting in the decrease in the oxidation peak. Therefore, a turn-off electrochemical carbaryl biosensor based on a flexible carbon paper electrode loaded with COF_DHNDA-BTH and AChE was constructed using the oxidation peak of an anionic probe [Fe(CN)₆]^3-/4- as the detection signal. The detection limit was 0.16 μM (S/N = 3), and the linear range was 0.48~35.0 μM. The sensor has good selectivity, repeatability, and stability, and has a good application prospect in pesticide detection.

In2O3/CdIn2S4 heterojunction-based photoelectrochemical immunoassay of carcinoembryonic antigen with enzymatic biocatalytic precipitation for signal amplification

This work reported a split-type photoelectrochemical (PEC) immunoassay for the detection of carcinoembryonic antigen (CEA) based on target-induced biocatalytic precipitation (BCP) by using In₂O₃/CdIn₂S₄ heterojunctions as the photosensitizers. The synthesized In₂O₃/CdIn₂S₄ heterojunctions improved the efficiency of charge separation and shortened the electron convey path to enhance the photocurrent, thus exhibiting high conductivity and low complexation rates of photogenerated electrons and holes. In the presence of CEA, horseradish peroxidase (HRP) catalyzed 4-chloro-1-naphthol (4-CN) to produce benzo-4-chloro-hexadienone (4-CD) through H₂O₂. Then, 4-CD was deposited onto the surface of In₂O₃/CdIn₂S₄ to reduce the photocurrent and realized the signal amplification. The PEC immunoassay revealed an excellent photocurrent toward target CEA within a wide range of 0.01-50 ng mL^-1 at a low limit of detection of 2.8 pg mL^-1 under the optimum conditions. Multiple switching light excitation tests demonstrated the good reliability and stability of the fabricated PEC biosensor. The accuracy was acceptable in comparison with human CEA enzyme-linked immunosorbent assay (ELISA) kit.

Expression Levels and Clinical Significance of Serum miR-497, CEA, CA24-2, and HBsAg in Patients with Colorectal Cancer

The objective of the current study was to look at the levels of blood micro ribonucleic acid- (miR-) 497, carcinoembryonic antigen (CEA), carbohydrate antigen (CA) 24-2, and hepatitis B surface antigen (HBsAg) in patients with colorectal cancer (CRC), as well as the clinical importance of these markers in CRC patients. The serum levels of miR-497, CEA, CA24-2, and HBsAg were compared between 60 patients with CRC (observation group) and another 60 patients with colorectal polyps (control group). The 4 indicators in patients with lymph node metastasis and liver metastasis were compared. The diagnostic effects of 4 detection methods and the combined detection were analyzed, and the influence of 4 indicators on the 5-year cumulative survival rate of patients was discussed. The results showed that the serum levels of miR-497 and HBsAg were lower, and the levels of CEA and CA24-2 were higher in the observation group (P < 0.05). The combined detection had the best diagnostic effect, and CEA alone had the best prediction effect. The serum level of miR-497 was significantly lower in patients with lymphatic metastasis, with the significantly higher levels of CEA and CA24-2 (P < 0.05). The HBsAg level of patients with liver metastases was greatly lower than that of patients without liver metastases (P < 0.05). The 5-year cumulative survival rate of patients with high levels of CEA and CA24-2 was significantly lower than that of patients with low level of CEA. The 5-year cumulative survival rate was lower in patients with low level of HBsAg, but the difference was small. The 5-year cumulative survival rate of patients with elevated serum miR-497 was observably lower. In conclusion, combined detection could diagnose CRC more accurately. Serum miR-497, CEA, and CA24-2 were important in the diagnosis of lymph node metastasis of CRC. HBsAg did a better job of predicting liver metastases in CRC patients. High level of CEA significantly reduced the cumulative survival rate of CRC patients and could predict the long-term survival rate of patients. Serum levels of miR-497, CEA, CA24-2, and HBsAg played a positive role in the diagnosis and evaluation of CRC and could identify lymph node and liver metastases, having a high clinical guidance value.

Construction of hydrophilic covalent organic frameworks and their fast and efficient adsorption of cationic dyes from aqueous solution

TFPB-Pa-SO3H COF and TFPB-BDSA COF were synthesized and showed fast adsorption of MLB (1 and 2 min) and high adsorption uptakes of CV (1559 and 1288 mg g−1). TFPB-Pa-SO3H COF as adsorbing material was used for the removal of dye molecules in real water samples.