Quantum Dot-Peptide Conjugates as Energy Transfer Probes for Sensing the Proteolytic Activity of Matrix Metalloproteinase-14

Synthetic Protein-to-DNA Input Exchange for Protease Activity Detection Using CRISPR-Cas12a

We present a novel activity-based detection strategy for matrix metalloproteinase 2 (MMP2), a critical cancer protease biomarker, leveraging a mechanism responsive to the proteolytic activity of MMP2 and its integration with CRISPR-Cas12a-assisted signal amplification. We designed a chemical translator comprising two functional units─a peptide and a peptide nucleic acid (PNA), fused together. The peptide presents the substrate of MMP2, while the PNA serves as a nucleic acid output for subsequent processing. This chemical translator was immobilized on micrometer magnetic beads as a physical support for an activity-based assay. We incorporated into our design a single-stranded DNA partially hybridized with the PNA sequence and bearing a region complementary to the RNA guide of CRISPR-Cas12a. The target-induced nuclease activity of Cas12a results in the degradation of FRET-labeled DNA reporters and amplified fluorescence signal, enabling the detection of MMP2 in the low picomolar range, showing a limit of detection of 72 pg/mL. This study provides new design principles for a broader applicability of CRISPR-Cas-based biosensing.

A highly sensitive fluorescence biosensor based on polylysine functionalized quantum dots for serum GDF-15 detection

Growth differentiation factor-15 (GDF-15) is a stress-responsive cytokine that increases in tissue injury and inflammatory states. The circulation level of GDF-15 is firmly correlated with cardiovascular diseases. Herein, we constructed a novel quantum dot-based fluorescent immunosensor for the sensitive detection of serum GDF-15. In this proposed platform, green-emission water-soluble carboxyl-capped CdTe quantum dots were synthesized as fluorescent labels, conjugated with lysine-rich biotinylated peptides P16K to amplify fluorescent signals, and then linked to antibodies via a biotin-streptavidin system to obtain the fluorescent detection probes. The probes were then integrated into a fluorescence-linked immunosorbent assay (FLISA) platform for GDF-15 detection, achieving a wide linear range (6-1600 pg/mL) and low limits of detection (0.98 pg/mL). Moreover, our approach has been demonstrated in clinical validation experiments performed on human serum samples, in which the results obtained were consistent with those from commercial ELISA kits. Due to its higher sensitivity in comparison to commercial ELISA kits, the platform shows excellent potential for early diagnosis and risk screening of cardiovascular diseases.

Multifunctional nano co-delivery system for efficiently eliminating neuroblastoma by overcoming cancer heterogeneity

The high heterogeneity of neuroblastoma (NB) is currently the main challenge in clinical treatment, impeding the complete eradication of the tumor through monotherapy alone. In this study, we propose a combination strategy using a targeted nano co-delivery system (ADRF@Ag2Se) comprising phototheranostic agents, differentiation inducers and chemotherapy drugs for sequential therapy of NB. Upon intravenous injection, ADRF@Ag2Se demonstrates effective tumor targeting by the specific binding of AF7P to MMP14, which is overexpressed on the surface of NB cells. Subsequent implementation of local photothermal therapy (PTT) leverages the robust photothermal conversion capabilities of the amphiphilic photothermal reagent PF. This is followed by the temperature-triggered release of differentiation-inducing agent 13-cis-retinoic acid and chemo-drug doxorubicin to synergistically eliminate the residual lesions. This nanotherapeutic strategy facilitatesin vivotargeted delivery and PTT under the supervision of NIR-II fluorescence, and it also enhances the chemotherapeutic response through differentiation induction of poorly differentiated cancer cells. In the NB tumor model, this co-delivery strategy effectively inhibited tumor growth and significantly prolonged the survival of the mice.

Oxidative stress modulating nanomaterials and their biochemical roles in nanomedicine

Many pathological conditions are predominantly associated with oxidative stress, arising from reactive oxygen species (ROS); therefore, the modulation of redox activities has been a key strategy to restore normal tissue functions. Current approaches involve establishing a favorable cellular redox environment through the administration of therapeutic drugs and redox-active nanomaterials (RANs). In particular, RANs not only provide a stable and reliable means of therapeutic delivery but also possess the capacity to finely tune various interconnected components, including radicals, enzymes, proteins, transcription factors, and metabolites. Here, we discuss the roles that engineered RANs play in a spectrum of pathological conditions, such as cancer, neurodegenerative diseases, infections, and inflammation. We visualize the dual functions of RANs as both generator and scavenger of ROS, emphasizing their profound impact on diverse cellular functions. The focus of this review is solely on inorganic redox-active nanomaterials (inorganic RANs). Additionally, we deliberate on the challenges associated with current RANs-based approaches and propose potential research directions for their future clinical translation.

A carbon-based bifunctional heterogeneous enzyme: toward sustainable pollution control

We present a study on an immobilized functional enzyme (IFE), a novel biomaterial with exceptional sustainability in enzyme utility, widely employed across various fields worldwide. However, conventional carriers are prone to eroding the active functional domain of the IFE, thereby weakening its intrinsic enzyme activity. Consequently, there is a burgeoning interest in developing next-generation IFEs. In this study, we engineered a carbon-based bifunctional heterogeneous enzyme (MIP-AMWCNTs@lipase) for the intelligent recognition of di(2-ethylhexyl)phthalate (DEHP), a common plasticizer. The heterogeneous enzyme contains a bifunctional structural domain that both enriches and degrades DEHP. We investigated its dual-response performance for the enrichment and specific removal of DEHP. The imprinting factor of the carrier for DEHP was 3.4, demonstrating selectivity for DEHP. The removal rate reached up to 94.2% over a short period. The heterogeneous enzyme exhibited robust activity, catalytic efficiency, and excellent stability under harsh environmental conditions, retaining 77.7% of its initial lipase activity after 7 cycles. Furthermore, we proposed a stepwise heterogeneous enzyme reaction kinetic model based on the Michaelis-Menten equation to enhance our understanding of enzyme reaction kinetics. Our study employs a dual-effect recognition strategy of molecular blotting and enzyme immobilization to establish a method for the removal of organic pollutants. These findings hold significant implications for the fields of biomaterials and environmental science.

Colorimetric sensing for translational applications: from colorants to mechanisms

Colorimetric sensing offers instant reporting via visible signals. Versus labor-intensive and instrument-dependent detection methods, colorimetric sensors present advantages including short acquisition time, high throughput screening, low cost, portability, and a user-friendly approach. These advantages have driven substantial growth in colorimetric sensors, particularly in point-of-care (POC) diagnostics. Rapid progress in nanotechnology, materials science, microfluidics technology, biomarker discovery, digital technology, and signal pattern analysis has led to a variety of colorimetric reagents and detection mechanisms, which are fundamental to advance colorimetric sensing applications. This review first summarizes the basic components (e.g., color reagents, recognition interactions, and sampling procedures) in the design of a colorimetric sensing system. It then presents the rationale design and typical examples of POC devices, e.g., lateral flow devices, microfluidic paper-based analytical devices, and wearable sensing devices. Two highlighted colorimetric formats are discussed: combinational and activatable systems based on the sensor-array and lock-and-key mechanisms, respectively. Case discussions in colorimetric assays are organized by the analyte identities. Finally, the review presents challenges and perspectives for the design and development of colorimetric detection schemes as well as applications. The goal of this review is to provide a foundational resource for developing colorimetric systems and underscoring the colorants and mechanisms that facilitate the continuing evolution of POC sensors.

Advancements in SARS-CoV-2 detection: Navigating the molecular landscape and diagnostic technologies

According to information from the World Health Organization, the world has experienced about 430 million cases of COVID-19, a world-wide health crisis caused by the SARS-CoV-2 virus. This outbreak, originating from China in 2019, has led to nearly 6 million deaths worldwide. As the number of confirmed infections continues to rise, the need for cutting-edge techniques that can detect SARS-CoV-2 infections early and accurately has become more critical. To address this, the Federal Drug Administration (FDA) has issued emergency use authorizations (EUAs) for a wide range of diagnostic tools. These include tests based on detecting nucleic acids and antigen-antibody reactions. The quantitative real-time reverse transcription PCR (qRT-PCR) assay stands out as the gold standard for early virus detection. However, despite its accuracy, qRT-PCR has limitations, such as complex testing protocols and a risk of false negatives, which drive the continuous improvement in nucleic acid and serological testing approaches. The emergence of highly contagious variants of the coronavirus, such as Alpha (B.1.1.7), Delta (B.1.617.2), and Omicron (B.1.1.529), has increased the need for tests that can specifically identify these mutations. This article explores both nucleic acid-based and antigen-antibody serological assays, assessing the performance of recently approved FDA tests and those documented in scientific research, especially in identifying new coronavirus strains.

Nanocrystals for Deep-Tissue In Vivo Luminescence Imaging in the Near-Infrared Region

In vivo imaging technologies have emerged as a powerful tool for both fundamental research and clinical practice. In particular, luminescence imaging in the tissue-transparent near-infrared (NIR, 700-1700 nm) region offers tremendous potential for visualizing biological architectures and pathophysiological events in living subjects with deep tissue penetration and high imaging contrast owing to the reduced light-tissue interactions of absorption, scattering, and autofluorescence. The distinctive quantum effects of nanocrystals have been harnessed to achieve exceptional photophysical properties, establishing them as a promising category of luminescent probes. In this comprehensive review, the interactions between light and biological tissues, as well as the advantages of NIR light for in vivo luminescence imaging, are initially elaborated. Subsequently, we focus on achieving deep tissue penetration and improved imaging contrast by optimizing the performance of nanocrystal fluorophores. The ingenious design strategies of NIR nanocrystal probes are discussed, along with their respective biomedical applications in versatile in vivo luminescence imaging modalities. Finally, thought-provoking reflections on the challenges and prospects for future clinical translation of nanocrystal-based in vivo luminescence imaging in the NIR region are wisely provided.

Single probe-based catalytic quantum dot FRET nanosensor for human alkyladenine DNA glycosylase detection

Human alkyladenine DNA glycosylase (hAAG) is essential for repairing alkylated and deaminated bases, and it has become a prospective diagnosis biomarker and a therapeutic target for disease treatment. However, most of hAAG assays suffer from complicated reaction scheme, poor specificity, long assay time, and limited sensitivity. Herein, we report a novel single probe-based catalytic quantum dot (QD) Förster resonance energy transfer (FRET) nanosensor for simple and sensitive detection of hAAG activity. In this assay, hAAG induces the generation of 3' OH terminus via the excision of I base and the cleavage of AP site by APE1, subsequently initiating strand displacement reaction to produce numerous ssDNA signal probes. These probes can self-assemble on the QD surface to induce efficient FRET between QD and Cy5. This assay is very simple with the involvement of only a single probe for the achievement of both specific sensing and efficient signal amplification. Moreover, each signal probe contains multiple Cy5 moieties, and multiple signal probes can assemble on a single QD to greatly enhance the FRET efficiency. This nanosensor exhibits a detection limit of 3.60 × 10-10 U/μL and it is suitable for measuring enzymatic kinetics, screening inhibitor, and quantifying cellular hAAG activity with single-cell sensitivity.

Ligation of Gold Nanoparticles with Self-Assembling, Coiled-Coil Peptides

The surface of gold nanoparticles (AuNPs) can be conjugated with a wide range of highly functional biomolecules. A common pitfall when utilizing AuNPs is their tendency to aggregate, especially when their surface is functionalized with ligands of low molecular weight (no steric repulsion) or ligands of neutral charge (no electrostatic repulsion). For biomedical applications, AuNPs that are colloidally stable are desirable because they have a high surface area and thus reactivity, resist sedimentation, and exhibit uniform optical properties. Here, we engineer the surface of AuNPs so that they remain stable when decorated with coiled-coil (CC) peptides while preserving the native polypeptide properties. We achieve this by using a neutral, mixed ligand layer composed of lipoic acid poly(ethylene glycol) and lipoic acid poly(ethylene glycol) maleimide to attach the CCs. Tuning the surface fraction of each component within the mixed ligand layer also allowed us to control the degree of AuNP labeling with CCs. We demonstrate the dynamic surface properties of these CC-AuNPs by performing a place-exchange reaction and their utility by designing an energy-transfer-based caspase-3 sensor. Overall, this study optimizes the surface chemistry of AuNPs to quantitatively present functional biomolecules while maintaining colloid stability.

Endoproteolysis of Oligopeptide-Based Coacervates for Enzymatic Modeling

Better insights into the fate of membraneless organelles could strengthen the understanding of the transition from prebiotic components to multicellular organisms. Compartmentalized enzyme reactions in a synthetic coacervate have been investigated, yet there remains a gap in understanding the enzyme interactions with coacervate as a substrate hub. Here, we study how the molecularly crowded nature of the coacervate affects the interactions of the embedded substrate with a protease. We design oligopeptide-based coacervates that comprise an anionic Asp-peptide (D10) and a cationic Arg-peptide (R5R5) with a proteolytic cleavage site. The coacervates dissolve in the presence of the main protease (Mpro) implicated in the coronavirus lifecycle. We capitalize on the condensed structure, introduce a self-quenching mechanism, and model the enzyme kinetics by using Cy5.5-labeled peptides. The determined specificity constant (kcat/KM) is 5817 M-1 s-1 and is similar to that of the free substrate. We further show that the enzyme kinetics depend on the type and quantity of dye incorporated into the coacervates. Our work presents a simple design for enzyme-responsive coacervates and provides insights into the interactions between the enzyme and coacervates as a whole.

Construction of a Quantum-Dot-Based FRET Nanosensor through Direct Encoding of Streptavidin-Binding RNA Aptamers for N6-Methyladenosine Demethylase Detection

N6-Methyladenosine (m6A) demethylases can catalyze the removal of the methyl modification on m6A, and it is closely associated with the occurrence, proliferation, differentiation, and metastasis of malignancies. The m6A demethylases (e.g., fat mass and obesity-associated protein (FTO)) may act as a cancer biomarker and are crucial for anticancer drug screening and early clinical diagnosis. Herein, we demonstrate the construction of a quantum-dot-based Förster resonance energy-transfer (FRET) nanosensor through direct encoding of streptavidin-binding RNA aptamers (SA aptamers) for m6A demethylase detection. This nanosensor employs multiple Cy5-molecule-labeled SA aptamers as the building materials to construct the 605QD-RNA-Cy5 nanoassembly, and it exploits the hinder effect of m6A upon elongation and ligation reactions to distinguish m6A-containing RNA probes from demethylated RNA probes. When m6A demethylase is present, the m6A-containing RNA probes are demethylated to generate the demethylated RNA probes, initiating strand extension and ligation reactions to yield a complete transcription template for SA aptamers. Subsequently, a T7-assisted cascade transcription amplification reaction is activated to transcribe abundant SA aptamers with the incorporation of multiple Cy5 fluorophores. The Cy5-incorporated SA aptamers can self-assembly onto the streptavidin-coated 605QD surface to obtain the 605QD-SA aptamer-Cy5 nanoassemblies, resulting in the generation of distinct FRET signals. This nanosensor exhibits ultrahigh sensitivity and excellent specificity, and it can detect endogenous FTO at the single-cell level. Furthermore, this nanosensor can precisely measure enzyme kinetic parameters, screen m6A demethylase inhibitors, and differentiate the FTO expression between breast cancer patients and healthy individual tissues, offering a versatile platform for clinical diagnostic and drug discovery.

Targeting Peptides: The New Generation of Targeted Drug Delivery Systems

Peptides can act as targeting molecules, analogously to oligonucleotide aptamers and antibodies. They are particularly efficient in terms of production and stability in physiological environments; in recent years, they have been increasingly studied as targeting agents for several diseases, from tumors to central nervous system disorders, also thanks to the ability of some of them to cross the blood-brain barrier. In this review, we will describe the techniques employed for their experimental and in silico design, as well as their possible applications. We will also discuss advancements in their formulation and chemical modifications that make them even more stable and effective. Finally, we will discuss how their use could effectively help to overcome various physiological problems and improve existing treatments.

Evaluating the Catalytic Efficiency of the Human Membrane-type 1 Matrix Metalloproteinase (MMP-14) Using AuNP-Peptide Conjugates

Interactions of plasmonic nanocolloids such as gold nanoparticles and nanorods with proximal dye emitters result in efficient quenching of the dye photoluminescence (PL). This has become a popular strategy for developing analytical biosensors relying on this quenching process for signal transduction. Here, we report on the use of stable PEGylated gold nanoparticles, covalently coupled to dye-labeled peptides, as sensitive optically addressable sensors for determining the catalytic efficiency of the human matrix metalloproteinase-14 (MMP-14), a cancer biomarker. We exploit real-time dye PL recovery triggered by MMP-14 hydrolysis of the AuNP-peptide-dye to extract quantitative analysis of the proteolysis kinetics. Sub-nanomolar limit of detections for MMP-14 has been achieved using our hybrid bioconjugates. In addition, we have used theoretical considerations within a diffusion-collision framework to derive enzyme substrate hydrolysis and inhibition kinetics equations, which allowed us to describe the complexity and irregularity of enzymatic proteolysis of nanosurface-immobilized peptide substrates. Our findings offer a great strategy for the development of highly sensitive and stable biosensors for cancer detection and imaging.