Biometric Photoelectrochemical-Visual Multimodal Biosensor Based on 3D Hollow HCdS@Au Nanospheres Coupled with Target-Induced Ion Exchange Reaction for Antigen Detection

Constructing a highly sensitive duplex immunoassay using AuNPs and AgNPs as nanolabels for investigating the epithelial-mesenchymal transition occurring on circulating tumor cells with lung cancer patients

Transformation of epithelial to mesenchymal (EMT) is an important event in the process of tumor initiation, invasion and metastasis. Circulating tumor cells (CTCs) are one kind of important markers in the field of liquid tumor biopsy, whose number and phenotype represent the occurrence and progression of tumors. Therefore, it is our interest to investigate the epithelial mesenchymal transition process occurring on the surface of CTCs. Herein in this work, two proteins of E-cadherin (E-cad) and N-cadherin (N-cad) were selected as representative proteins of EMT process. To achieve simultaneous analysis of E-cad and N-cad on the surface of rare CTCs, we designed a duplex and portable immunosensor using AuNPs and AgNPs as nanolabels to amplify the immunoreaction signals. The dual channel immunosensor not only exhibited good electrochemical responses for recombinant E-cad and N-cad as low as 0.1 ng/mL and 0.05 ng/mL, respectively, but also showed good linear correlations with different numbers of phenotypic CTCs (10-500 cells/10 μL). The above strategy was further employed to inspect the occurrence of EMT on CTCs surface, which displayed a high consistence with other molecular biological characterizations. Finally, this immunoassay was successfully applied to inspect the correlations of numbers, phenotype of CTCs, as well as E-cad and N-cad expressions on these CTCs in bloods of NSCLC patients with disease stage.

A split organic photophotochemical transistor/vision sensing platform based on MNZ composite and ZIF-67/CuCoO nanospheres for ultra-sensitive detection of CEA

In this study, a novel organic photophotochemical transistor (OPECT) biosensing platform was proposed for dual-mode detection of CEA. The dual-mode detecting system is achieved benefit from the exceptional photoelectric performance of MIL-53(Fe) -NH2@ZnIn2S4 (MNZ) and the peroxidase enzyme (POD) activity of ZIF-67/Cu0.76Co2.24O4 (ZIF-67/CuCoO). Ab2- ZIF-67/CuCoO probe was immobilized on a 96-well plate by enzyme-linked immunosorbent assay, which accelerated the oxidation of 3,3,5,5-tetramethylbenzidine (TMB) by hydrogen peroxide and thus successfully realized visual detection of CEA. Additionally, in OPECT biosensing mode, the oxidized form of TMB (oxTMB·) serves as a consumptive agents of the electron donor AA, which cause the photocurrent change of MNZ heterojunction, leading to a decrease in the channel current of poly (ethylenedioxythiophene): poly (styrene sulfonate) (PEDOT: PSS) organic transistor. The integration of nanobiocatalysts and the OPECT system demonstrates excellent detection performance for CEA, with a detection limit as low as 3.24 fg mL-1 and expanded their prospective applications for clinical detection of nucleic acids, proteins, and other tumor markers.

Smartphone-assisted fluorescent microfluidic-chip for sensitive detection of sweat glucose via dual-sensing of O2/H2O2

A novel smartphone-assisted fluorescent microfluidic-chip was designed for detecting sweat glucose. The microfluidic chip contained six microchambers, each of which was equipped with a glucose sensing membrane incorporating glucose oxidase (GOD), fluorescent O2 probe PtTFPP and H2O2 probe G1. Based upon O2 consumption and H2O2 generation during glucose catalysis by GOD, the chip produced two fluorescence signals towards glucose under single-wavelength excitation, i.e. green fluorescence in response to H2O2 and red fluorescence to O2. The limit of detection (LOD) based on H2O2 monitoring was 0.005 mM, while the LOD based on O2 monitoring was 0.04 mM. Furthermore, the obtained chip was integrated with a smartphone-based portable platform to record RGB values for point-of-care testing of sweat glucose. Glucose calibration (Y = -3.45 + 1.81∗R + 0.68∗G) at 6-min time point was performed by combining R and G channels signals. The dual-monitoring analysis provided a more accurate and reliable verification of glucose detection. This smartphone-assistant optical microfluidic-chip device holds significant potential for portable self-management of glucose in personalized healthcare and clinical diagnosis.

Immuno-Rolling Circle Amplification (Immuno-RCA): Biosensing Strategies, Practical Applications, and Future Perspectives

In the rapidly evolving field of life sciences and biomedicine, detecting low-abundance biomolecules, and ultraweak biosignals presents significant challenges. This has spurred a rapid development of analytical techniques aiming for increased sensitivity and specificity. These advancements, including signal amplification strategies and the integration of biorecognition events, mark a transformative era in bioanalytical precision and accuracy. A prominent method among these innovations is immuno-rolling circle amplification (immuno-RCA) technology, which effectively combines immunoassays with signal amplification via RCA. This process starts when a targeted biomolecule, such as a protein or cell, binds to an immobilized antibody or probe on a substrate. The introduction of a circular DNA template triggers RCA, leading to exponential amplification and significantly enhanced signal intensity, thus the target molecule is detectable and quantifiable even at the single-molecule level. This review provides an overview of the biosensing strategy and extensive practical applications of immuno-RCA in detecting biomarkers. Furthermore, it scrutinizes the limitations inherent to these sensors and sets forth expectations for their future trajectory. This review serves as a valuable reference for advancing immuno-RCA in various domains, such as diagnostics, biomarker discovery, and molecular imaging.

Photoelectron-transfer-effect grafting: Validation of a generalized strategy for fluorescence and photoelectrochemical dual-mode detection of hydrogen sulfide

BACKGROUND

The progress of modern research is constantly fueled by the convergence of multiple technologies. Despite the enormous potential of both fluorescence (FL) and photoelectrochemical (PEC) technologies, the development of synergistic PEC-FL sensing platforms that combine the advantages of both is still in its early stages due to their relatively recent inception. Hydrogen sulfide (H2S), possessing dual irritant and asphyxiating traits, poses challenges for environmental preservation and human health. The development of the PEC-FL detection methodology for H2S in complex environmental settings is imperative.

RESULTS

Combining FL and PEC sensing techniques, this work presented a new concept of photoinduced electron-transfer (PET) effect grafting for dual-mode fluorescence and PEC analysis. Briefly, a well-designed fluorescent molecule (BTFM-DNP) featuring the PET effect was synthesized and implemented to modulate the photoelectric response of the indium tin oxide (ITO)/BiOI photocathode electrode. After reacting with H2S, the thiolysis of dinitrophenyl ether eliminated the intramolecular PET effect and recovered the significant fluorescence of the probe. Remarkably, the newly formed 2,4-dinitrobenzenethiol (DBT) with strong electron-withdrawing groups was then grafted to the ITO/BiOI photoelectrode and achieved the successful transfer of the PET process, resulting in a sharp decrease in photocurrent. The as-developed dual-mode protocol exhibited good performance in terms of ultra-sensitivity, high selectivity, fast response, and a wide detection range from 1 pM to 80 μM.

SIGNIFICANCE

The newly developed PEC-FL sensing platform can be applied to detect H2S levels in both the environment and food. This study demonstrates a promising synergy between fluorescent probes and PEC sensors, offering a novel perspective on the advancement of multi-mode analysis techniques. This approach has the potential to significantly enhance detection accuracy and reliability.

Gold Nanoparticles-Based Colorimetric Immunoassay of Carcinoembryonic Antigen with Metal-Organic Framework to Load Quinones for Catalytic Oxidation of Cysteine

This work reported gold nanoparticles (AuNPs)-based colorimetric immunoassay with the Cu-based metal-organic framework (MOF) to load pyrroloquinoline quinone (PQQ) for the catalytic oxidation of cysteine. In this method, both Cu2+ and PQQ in the MOF could promote the oxidation of inducer cysteine by redox cycling, thus limiting the cysteine-induced aggregation of AuNPs and achieving dual signal amplification. Specifically, the recombinant carcinoembryonic antigen (CEA) targets were anchored on the MOF through the metal coordination interactions between the hexahistidine (His6) tag in CEA and the unsaturated Cu2+ sites in MOF. The CEA/PQQ-loaded MOF could be captured by the antibody-coated ELISA plate to catalyze the oxidation of cysteine. However, once the target CEA in the samples bound to the antibody immobilized on the plate surface, the attachment of CEA/PQQ-loaded MOF would be limited. Cysteine remaining in the solution would trigger the aggregation of AuNPs and cause a color change from red to blue. The target concentration was positively related to the aggregation and color change of AuNPs. The signal-on competitive plasmonic immunoassay exhibited a low detection limit with a linear range of 0.01-1 ng/mL. Note that most of the proteins in commercial ELISA kits are recombinant with a His6 tag in the N- or C-terminal, so the work could provide a sensitive plasmonic platform for the detection of biomarkers.

Photocurrent switchable dual-target bioassay: Signal distinction and interface reconfiguration via pH-responsive triplex DNA programming

Most multiplexed photoelectrochemical (PEC) sensors require additional instrumentation and cumbersome electrode modification and surface partitioning, which limits their portability and instrument miniaturization. Herein, a pH-responsive programmable triple DNA nanomachine was developed for constructing a reconfigurable multiplex PEC sensing platform. By programming the base sequence, T-A·T-riched triple DNA was designed to construct integrated nano-controlled release machine (INCRM) for simultaneous recognition of multiple targets. The INCRM enables to recognize two targets in one step, and sequentially separate the signal labels by pH adjustment. The detached signal label catalyzes glucose to produce gluconic acid, causing the C-riched DNA fold into a triple structure on the electrode surface. As a result, one target can be detected relying on the enhanced photocurrent due to accelerated electron transfer between the CdS QD labeled at the end of C-riched DNA and the electrode. The triplex DNA dissociation in pH 7.4 buffer reconfigures the electrode interface, which can be continued to detect another target. The feasibility of the multiplexed sensor is verified by the detection of extensively coexisting antibiotics enrofloxacin (ENR) and ciprofloxacin (CIP). Under the optimal conditions, wide linear range (10 fg/mL ∼ 1 μg/mL) and low detection limit (3.27 fg/mL and 9.60 fg/mL) were obtained. The pH-regulated programmable triplex DNA nanomachine-based sensing platform overcomes the technical difficulties of conventional multiplexed PEC assay, which may open the way for miniaturization of multiplexed PEC sensors.

Signal amplification strategies in photoelectrochemical sensing of carcinoembryonic antigen

Early detection of cancer markers is critical for cancer diagnosis and cancer therapy since these markers may indicate cancer risk, incidence, and disease prognosis. Carcinoembryonic antigen (CEA) is a type of non-specific and broad-spectrum cancer biomarker commonly utilized for early cancer diagnosis. Moreover, it serves as an essential tool to assess the efficacy of cancer treatment and monitor tumor recurrence as well as metastasis, thus garnering significant attention for precise and sensitive CEA detection. In recent years, photoelectrochemical (PEC) techniques have emerged as prominent methods in CEA detection due to the advantages of PEC, such as simple equipment requirements, cost-effectiveness, high sensitivity, low interference from background signals, and easy of instrument miniaturization. Different signal amplification methods have been reported in PEC sensors for CEA analysis. Based on these, this article reviews PEC sensors based on various signal amplification strategies for detection of CEA during the last five years. The advantages and drawbacks of these sensors were discussed, as well as future challenges.

Spatial-resolved and self-calibrated 3D-printed photoelectrochemical biosensor engineered by multifunctional CeO2/CdS heterostructure for immunoassay

A spatial-resolved and self-calibrated photoelectrochemical (PEC) biosensor has been fabricated by a multifunctional CeO2/CdS heterostructure, achieving portable and sensitive detection of carcinoembryonic antigen (CEA) using a homemade 3D printing device. The CeO2/CdS heterostructure with matched band structure is prepared to construct the dual-photoelectrodes to improve the PEC response of CeO2. In particular, as the photoactive nanomaterial, the CeO2 also plays the role of peroxidase mimetic nanozymes. Therefore, the catalytic performance of CeO2 with different morphologies (e.g., nano-cubes, nano-rods and nano-octahedra) have been studied, and CeO2 nano-cubes (c-CeO2) achieve the optimal catalytic activity. Upon introducing CEA, the sandwich-type immunocomplex is formed in the microplate using GOx-AuNPs-labeled second antibody as detection antibody. As a result, H2O2 can be produced from the catalytic oxidization of glucose substrate by GOx, which is further catalyzed by CeO2 to form •OH, thus in situ etching CdS and decreasing the photocurrents. The self-calibration is achieved by the dual-channel photoelectrodes on the homemade 3D printing device to obtain the photocurrents ratio, thus effectively normalizing the fluctuations of external factors to enhance the accuracy. This integrated biosensor with a detection limit as low as 0.057 ng mL-1 provides a promising way for ultrasensitive immunoassay in clinic application in complex environments.

A novel dual-model photoelectrochemical/electrochemical sensor based on Z-scheme TiO2 disks/methylene blue for kanamycin detection

Herein, a new dual-model photoelectrochemical (PEC)/electrochemical (EC) sensor based on Z-scheme titanium dioxide (TiO2) disk/methylene blue (MB) sensibilization for the detection of kanamycin (Kana) was developed. Metal-organic framework-derived porous TiO2 disks were synthesized and exhibited excellent anodic photocurrent under visible light excitation. Subsequently, amino-labeled double-stranded DNA (dsDNA) was introduced into the modified electrode. Photocurrent was enhanced with MB embedded in dsDNA to form Z-scheme TiO2/MB sensibilization. When the target, Kana, was present, it specifically bound to the aptamer in the dsDNA, leading to the disruption of the dsDNA structure and the release of MB. This release of MB and the increase in target spatial resistance resulted in a significant weakening of PEC signal and a decreased oxidation peak current of MB. The PEC sensor successfully detected Kana in the range of 2-1000 pM with an LOD of 0.17 pM. Meanwhile, the EC sensor for Kana detection showed a linear range of 5-500 pM with an LOD of 1.8 pM. Additionally, the sensor exhibited excellent selectivity, reproducibility, stability, and good recoveries when applied to milk and honey samples. As a result, this method has the potential for application in ensuring food safety through the rapid determination of antibiotics in food.

Gold nanomaterials: important vectors in biosensing of breast cancer biomarkers

Breast cancer (BC) is one of the most common malignant tumors in women worldwide, and its incidence is increasing every year. Early diagnosis and treatment are critical to improve the curability and prognosis of patients. However, existing detection methods often suffer from insufficient sensitivity and specificity, which limits their clinical application. Fortunately, the rapid development of nanotechnology offers new possibilities for diagnosing BC. For example, the unique physicochemical properties of gold nanomaterials (Au NMs), such as fascinating optical properties and quantum size effect, along with excellent biocompatibility and modifiability, enable them to manifest great potential in the field of biosensing, especially in the detection of BC biomarkers. Through fine surface modification and functionalization, Au NMs can accurately bind to specific antibodies, nucleic acids, and other biomolecules, thus achieving sensitive and precise detection of specific biomarkers. Here, we focus on the research progress of Au NMs as a key biosensing vector in BC biomarker detection. From four major perspectives of early diagnosis, prognostic evaluation, risk prediction, and bioimaging applications, we have thoroughly analyzed the broad application of Au NMs in BC biomarker detection and prospectively addressed its possible future trends. We hope this review will provide more comprehensive ideas for future researchers and promote the further development of this field.

Three-dimensional polymer phenylethnylcopper/nitrogen doped graphene aerogel electrode coupled with Fe3O4 NPs nanozyme: Toward sensitive and robust photoelectrochemical detection of glyphosate in agricultural matrix

BACKGROUND

Presently, glyphosate (Gly) is the most extensively used herbicide globally, Nevertheless, its excessive usage has increased its accumulation in off-target locations, and aroused concerns for food and environmental safety. Commonly used detection methods, such as high-performance liquid chromatography and gas chromatography, have limitations due to expensive instruments, complex pre-processing steps, and inadequate sensitivity. Therefore, a facile, sensitive, and reliable Gly detection method should be developed.

RESULTS

A photoelectrochemical (PEC) sensor consisting of a three-dimensional polymer phenylethnylcopper/nitrogen-doped graphene aerogel (PPhECu/3DNGA) electrode coupled with Fe3O4 NPs nanozyme was constructed for sensitive detection of Gly. The microscopic 3D network of electrodes offered fast transfer routes for photo-generated electrons and a large surface area for nanozyme loading, allowing high signal output and analytical sensitivity. Furthermore, the use of peroxidase-mimicking Fe3O4 NPs instead of natural enzyme improved the stability of the sensor against ambient temperature changes. Based on the inhibitory effect of Gly on the catalytic activity Fe3O4 NPs, the protocol achieved Gly detection in the range of 5 × 10-10 to 1 × 10-4 mol L-1. Additionally, feasibility of the detection was confirmed in real agricultural matrix including tea, maize seedlings, maize seeds and soil.

SIGNIFICANCE

This work achieved facile, sensitive and reliable analysis towards Gly, and it was expected to inspire the design and utilization of 3D architectures in monitoring agricultural chemicals in food and environmental matrix.

Aptamer decorated PDA@magnetic silica microparticles for bacteria purification

One significant constraint in the advancement of biosensors is the signal-to-noise ratio, which is adversely affected by the presence of interfering factors such as blood in the sample matrix. In the present investigation, a specific aptamer binding was chosen for its affinity, while exhibiting no binding affinity towards non-target bacterial cells. This selective binding property was leveraged to facilitate the production of magnetic microparticles decorated with aptamers. A novel assay was developed to effectively isolate S. pneumoniae from PBS or directly from blood samples using an aptamer with an affinity constant of 72.8 nM. The capture experiments demonstrated efficiencies up to 87% and 66% are achievable for isolating spiked S. pneumoniae in 1 mL PBS and blood samples, respectively.

NIR-driven photoelectrochemical-fluorescent dual-mode biosensor based on bipedal DNA walker for ultrasensitive detection of microRNA

Optical biosensors have become powerful tools for bioanalysis, but most of them are limited by optic damage, autofluorescence, as well as poor penetration ability of ultraviolet (UV) and visible (Vis) light. Herein, a near-infrared light (NIR)-driven photoelectrochemical (PEC)-fluorescence (FL) dual-mode biosensor has been proposed for ultrasensitive detection of microRNA (miRNA) based on bipedal DNA walker with cascade amplification. Fueled by toehold-mediated strand displacement (TMSD), the bipedal DNA walker triggered by target miRNA-21 is formed through catalytic hairpin assembly (CHA), which can efficiently move along DNA tracks on CdS nanoparticles (CdS NPs)-modified fluorine doped tin oxide (FTO) electrode, resulting in the introduction of upconversion nanoparticles (UCNPs) on electrode surface. Under 980 nm laser irradiation, the UCNPs serve as the energy donor to emit UV/Vis light and excite CdS NPs to generate photocurrent for PEC detection, while the upconversion luminescence (UCL) at 803 nm is monitored for FL detection. This PEC-FL dual-mode biosensor has achieved the ultrasensitive and accurate analysis of miRNA-21 in human serum and different gynecological cancer cells. Overall, the proposed dual-mode biosensor can not only couple the inherent features of each single-mode biosensor but also provide mutual authentication of testing results, which opens up a new avenue for early diagnosis of miRNA-related diseases in clinic.

Construction of Multi-Mode Photoelectrochemical Immunoassays for Accurate Detection of Cancer Markers: Assisted with MOF-Confined Plasmonic Nanozyme

In clinical diagnostics, sensitive and accurate biomarker monitoring is greatly challenged by the limitations of false positive/negative errors in single-modal photoelectrochemical analysis. Herein, we propose a multimode immunoassay by integrating photoelectrochemical, colorimetric, and photothermal imaging analysis into one electrode. The immunosensors could simultaneously achieve three detection modes at one electrode, which provided a new pathway for the accurate detection of the target prostate-specific antigen (PSA) and circumvented false-positive or negative errors during the detection process. To this end, an integrated multifunctional chip (TiO2/ZIF-8/Cu(II)) was first constructed via in situ embedding of Cu(II) in the Metal-organic framework growth process. Then, an alkaline phosphatase-labeled magnetic probe was designed to achieve split-type detection for PSA. In a sodium thiophosphate solution, the in situ generated H2S could react with Cu(II) to form small-size CuS due to the nanoconfinement of ZIF-8 and thus result in the formation of p-n heterojunctions (TiO2/ZIF-8/CuS). The TiO2/ZIF-8/CuS could efficiently improve the light-harvesting ability and facilitate the charge separation efficiency, thus finally resulting in an increased photocurrent in the PEC mode. Furthermore, by constructing the portable colorimetric and photothermal sensors based on the Arduino microcontroller and photothermal imager, the TiO2/ZIF-8/CuS also provided point-of-care and visual detection modes, as the in situ-formed CuS exhibited peroxidase-mimicking activity and outstanding photothermal properties. The work had important prospects for establishing multimode immunoassays for the accurate detection of cancer markers in early disease diagnosis.

A colorimetric/electrochemical sensor based on coral-like CuCo2O4@AuNPs composites for sensitive dopamine detection

As a central neurotransmitter, DA (dopamine) plays a vital part in human metabolism, and its accurate detection is of great significance in disease diagnosis. In this work, we used Cu/Co bimetallic metal-organic frameworks (MOFs) as templates and gold nanoparticles (AuNPs) to construct novel nanocomposite coral-like CuCo2O4@AuNPs with strong peroxidase activity and electrochemical response. The coral-like CuCo2O4@AuNPs showed excellent peroxidase activity, and the Km value was as low as 0.358 mM. In the presence of H2O2, the colorless substrate 3,3',5,5', -tetramethylbenzidine (TMB) can be catalytically oxidized into a blue product. Simultaneously, coral-like CuCo2O4@AuNPs, as an electroactive substance, possess strong electrocatalytic activity, which enhances the electron-transfer rate and promotes excellent current response. In the presence of DA, coral-like CuCo2O4@AuNPs can catalyze the oxidation of DA to dopaquinone, which further enhances the electrochemical signal. In addition, DA captures hydroxyl radicals and inhibits the oxidation of TMB, resulting in an obvious color change (blue turns colorless) and realizing colorimetric detection with the naked eye. On this basis, we successfully established a dual-mode colorimetric/electrochemical sensor using coral-like CuCo2O4@AuNP nanocomposites as a dual-signal probe. Combining colorimetric and electrochemical detection, the sensor achieved a wide linear range (0-1 mM) and a low detection limit (0.07 μM) for DA concentration. It was also successfully used for the detection of DA in human serum and urine with good results. In summary, this work provides an intuitive, economical, sensitive, and promising platform for DA detection.

Isoniazide modified Ag nanoparticles triggered photothermal immunoassay for carcinoembryonic antigen detection

As the most well-known analytical tool, the thermometer has been extended to the field of biological analysis based on the photothermal effect. Herein, isoniazide modified Ag nanoparticles were prepared as nanolabels to build an immunoassay. The nanoparticles were characterized by transmission electron microscope (TEM), dynamic laser scattering (DLS), X-ray powder diffraction (XRD), and Fourier transform infrared (FT-IR). When the target protein was present, the sandwich immunoassay was developed and the photothermal reaction was triggered by isoniazide modified Ag nanoparticles. As a reducing agent, isoniazide is used to transform phosphomolybdic acid hydrate into molybdenum blue solution. And molybdenum blue had good photothermal stability and high photothermal conversion efficiency. The temperature variation of molybdenum blue solution showed a positive correlation with the concentration of carcinoembryonic antigen (CEA). Thus, the target protein of CEA was quantitative detection by thermometer. The linear response range is 0.1 ng mL-1 to 40 ng mL-1, and the detection limit is 0.08 ng mL-1. Moreover, the proposed protocol had satisfactory selectivity, accuracy, and reproducibility.

NAD+ mediated photoelectrochemical biosensor for histone deacetylase Sirt1 detection based on CuO-BiVO4-AgNCs heterojunction and hybridization chain reaction amplification

BACKGROUND

Histone deacetylate Sirt1 has been involved in many important biological processes and is closely related to the occurrence and development of many diseases. Therefore, the accurate detection of Sirt1 is of great significance for the diagnosis and treatment of diseases caused by Sirt1 and the development of related drugs.

RESULTS

In this work, a photoelectrochemical biosensor was developed for Sirt1 detection based on the NAD + mediated Sirt1 recognition and E. Coli DNA ligase activity. CuO-BiVO4p-n heterojunction was employed as the photoactive material, rolling circle amplification (RCA), hybridization chain reaction (HCR) and AgNCs were used as triple signal amplifications. As a bifunctional cofactor, NAD+ played a crucial role for Sirt1 detection, where the peptide deacetylation catalyzed by Sirt1 consumed NAD+, and the decreased amount of NAD + inhibited the activity of E. Coli DNA ligase, leading to the failure on RCA reaction, and improving the HCR reaction. Finally, AgNCs were generated using C-rich DNA as carrier. The surface plasmon effect of AgNCs and its heterojunction with CuO and BiVO4 accelerated the transfer rate of photogenerated carriers and improved the photocurrent signal. When the detection range was 0.001-200 nM, the detection limit of the biosensor was 0.76 pM (S/N = 3).

SIGNIFICANCE

The applicability of the method was evaluated by studying the effects of known inhibitors nicotinamide and environmental pollutant halogenated carbazole on Sirt1 enzyme activity. The results showed that this method can be used as a new platform for screening Sirt1 enzyme inhibitors, and also provided a new biomarker for evaluating the ecotoxicological effects of environmental pollutants.

Organic Electronics in Biosensing: A Promising Frontier for Medical and Environmental Applications

The promising field of organic electronics has ushered in a new era of biosensing technology, thus offering a promising frontier for applications in both medical diagnostics and environmental monitoring. This review paper provides a comprehensive overview of organic electronics' remarkable progress and potential in biosensing applications. It explores the multifaceted aspects of organic materials and devices, thereby highlighting their unique advantages, such as flexibility, biocompatibility, and low-cost fabrication. The paper delves into the diverse range of biosensors enabled by organic electronics, including electrochemical, optical, piezoelectric, and thermal sensors, thus showcasing their versatility in detecting biomolecules, pathogens, and environmental pollutants. Furthermore, integrating organic biosensors into wearable devices and the Internet of Things (IoT) ecosystem is discussed, wherein they offer real-time, remote, and personalized monitoring solutions. The review also addresses the current challenges and future prospects of organic biosensing, thus emphasizing the potential for breakthroughs in personalized medicine, environmental sustainability, and the advancement of human health and well-being.

Ultrathin mesoporous BiOCl nanosheets-mediated liposomes for photoelectrochemical immunoassay with in-situ signal amplification

Designing new biochemical sensors and achieving selectivity and high-sensitivity analysis is one of main research directions for immunoassays. Herein, a liposome-amplification photoelectrochemical (PEC) immunoassay was developed using ultrathin mesoporous bismuth chloride oxide nanosheets (BiOCl MSCN) for the highly selective and sensitive detection of carcinoembryonic antigen (CEA). Based on good photocurrent response of BiOCl MSCN toward dopamine, a liposome-conjugated secondary antibody loaded with dopamine was added for specific recognition in the presence of CEA. After the lysis treatment, the liberated dopamine was injected into the three-electrode electrolytic cell to enhance the photocurrent of BiOCl MSCN. Under the optimized conditions, the constructed liposome-mediated PEC immunoassay showed high sensitivity against CEA, with a dynamic response in the linear range of 0.05 ng mL-1 to 100 ng mL-1 and a detection limit of 35 pg mL-1. The present study proposes a new approach to the liposome-mediated PEC immunoassay constructed on ultrathin mesoporous BiOCl nanosheets, which can be used to target further the study of the sensing mechanism.

Self-powered photoelectrochemical/visual sensing platform based on PEDOT/BiOBr0.8I0.2 organic-inorganic hybrid material and MWCNTs/SnS2 heterojunction for the ultrasensitive detection of programmed death ligand-1

Programmed death ligand-1 (PD-L1) can enhance the immune tolerance of tumor cells by suppressing the activity of T-cells, and is one of the culprits that lead to the immune escape of tumor cells. Thus, the sensitive and portable detection of PD-L1 levels is essential for many types of tumor prognosis. Herein, a novel dual-mode analytical device for the ultrasensitive detection of PD-L1 has been developed. In this configuration, an advanced organic-inorganic hybrid material of poly(3,4-ethylenedioxythiophene) -BiOBr0.8I0.2 is designed as photocathode to enhance the photogenerated electron migration efficiency of the MWCNTs/SnS2-photoanode by external circuit, amplifying cathodic photocurrent without extra energy supply. The PD-L1 aptamer is loaded on the photocathode surface to ensure selectivity. The obtained sensing platform can achieve highly sensitive and specific detection of PD-L1 in complex environment, with a low detection limit of 0.29 pg mL-1. On the other hand, electrochromic material Prussian blue (PB) and MWCNTs/SnS2 are integrated to fabricate a portable sensing chip for PD-L1. Under illumination, photogenerated electrons of MWCNTs/SnS2 are injected into Prussian blue, and the blue PB is reduced to white product, indicating the concentration of PD-L1, without need of other instrument. This self-powered photoelectrochemical and visual analysis system has good practicability and is a promising clinical diagnosis tool.

Fabrication and nano-engineering of non-/noble metal-coupled plasmonic heterostructures for ultrasensitive photoelectrochemical immunoassays

To achieve reliable and ultrasensitive detection for disease markers in PEC bioanalysis, constructing and nano-engineering of ideal photoelectrodes and signal transduction strategies are of vital importance. Herein, a non-/noble metal coupled plasmonic nanostructure (TiO₂/r-STO/Au) was tactically designed with high-efficient PEC performance. Evidenced by the DFT and FDTD calculations, the reduced SrTiO₃ (r-STO) was found to support the localized surface plasmon resonance due to the sufficiently increased and delocalized local charge in r-STO. Under the synergistic coupling of plasmonic r-STO and AuNPs, the PEC performance of TiO₂/r-STO/Au was found remarkably promoted with reduced onset potential. This merit supported TiO₂/r-STO/Au as a self-powered immunoassay via a proposed oxygen-evolution-reaction mediated signal transduction strategy. With the increase of the target biomolecules (PSA), the catalytic active sites of TiO₂/r-STO/Au would be blocked and result in the decrease of the oxygen evaluation reaction. Under optimal conditions, the immunoassays exhibited an excellent detection performance with a LOD as low as 1.1 fg/mL. This work proposed a new type of plasmonic nanomaterial for ultrasensitive PEC bioanalysis.

Complementary DNA Significantly Enhancing Signal Response and Sensitivity of a Molecular Beacon Probe to Aflatoxin B1

This paper reported an improved molecular beacon method for the rapid detection of aflatoxin B1 (AFB1), a natural mycotoxin with severe carcinogenicity. With the assistance of a complementary DNA (cDNA) chain, the molecular beacon which consists of a DNA aptamer flanked by FAM and BHQ1 displayed a larger fluorescent response to AFB1, contributing to the sensitive detection of AFB1. Upon optimization of some key experimental factors, rapid detection of AFB1 ranging from 1 nM to 3 μM, within 20 min, was realized by using this method. A limit of detection (LoD) of 1 nM was obtained, which was lower than the LoD (8 nM) obtained without cDNA assistance. This aptamer-based molecular beacon detection method showed advantages in easy operation, rapid analysis and larger signal response. Good specificity and anti-interference ability were demonstrated. This method showed potential in real-sample analysis.

PEC/Colorimetric Dual-Mode Lab-on-Paper Device via BiVO4/FeOOH Nanocomposite In Situ Modification on Paper Fibers for Sensitive CEA Detection

A dual-mode lab-on-paper device based on BiVO4/FeOOH nanocomposites as an efficient generating photoelectrochemical (PEC)/colorimetric signal reporter has been successfully constructed by integration of the lab-on-paper sensing platform and PEC/colorimetric detection technologies for sensitive detection of carcinoembryonic antigen (CEA). Concretely, the BiVO4/FeOOH nanocomposites were in situ synthesized onto the paper-working electrode (PWE) through hydrothermal synthesis of the BiVO4 layer on cellulose fibers (paper-based BiVO4) which were initially modified by Au nanoparticles for improving the conductivity of three dimensional PWE, and then the photo-electrodeposition of FeOOH onto the paper-based BiVO4 to construct the paper-based BiVO4/FeOOH for the portable dual-mode lab-on-paper device. The obtained nanocomposites with an FeOOH needle-like structure deposited on the BiVO4 layer exhibits enhanced PEC response activity due to its effective separation of the electron-hole pair which could further accelerate the PEC conversion efficiency during the sensing process. With the introduction of CEA targets onto the surface of nanocomposite-modified PWE assisted by the interaction with the CEA antibody from a specific recognition property, a signal-off PEC signal state with a remarkable photocurrent response decreasing trend can be achieved, realizing the quantitative detection of CEA with the PEC signal readout mode. By means of a smart origami paper folding, the colorimetric signal readout is achieved by catalyzing 3,3',5,5'-tetramethylbenzidine (TMB) to generate blue oxidized TMB in the presence of H2O2 due to the satisfied enzyme-like catalytic activity of the needle-like structure, FeOOH, thereby achieving the dual-mode signal readout system for the proposed lab-on-paper device. Under the optimal conditions, the PEC and colorimetric signals measurement were effectively carried out, and the corresponding linear ranges were 0.001-200 ng·mL-1 and 0.5-100 ng·mL-1 separately, with the limit of detection of 0.0008 and 0.013 ng·mL-1 for each dual-mode. The prepared lab-on-paper device also presented a successful application in serum samples for the detection of CEA, providing a potential pathway for the sensitive detection of target biomarkers in clinical application.

DNA-functionalized gold nanoparticles: Modification, characterization, and biomedical applications

With the development of technologies based on gold nanoparticles (AuNPs), bare AuNPs cannot meet the increasing requirements of biomedical applications. Modifications with different functional ligands are usually needed. DNA is not only the main genetic material, but also a good biological material, which has excellent biocompatibility, facile design, and accurate identification. DNA is a perfect ligand candidate for AuNPs, which can make up for the shortcoming of bare AuNPs. DNA-modified AuNPs (DNA-AuNPs) have exciting features and bright prospects in many fields, which have been intensively investigated in the past decade. In this review, we summarize the various approaches for the immobilization of DNA strands on the surface of AuNPs. Representative studies for biomedical applications based on DNA-AuNPs are also discussed. Finally, we present the challenges and future directions.