Homogeneous Electrochemical Immunoassay Using an Aggregation-Collision Strategy for Alpha-Fetoprotein Detection

Glycan-Evocated Metallization for Amplification-Free Electrochemical Detection of Glycoproteins at Low Concentration Levels

Glycoproteins have become the most often screened tumor markers in the in vitro diagnostics. Although a large number of electrochemical methods have been proposed to sensitively detect glycoproteins, most of them involve the aid of laborious signal amplification. Herein, we report the use of glycan-evocated metallization (GlyMetal) for the amplification-free electrochemical detection of glycoproteins at low concentration levels. Briefly, the glycoproteins of interest are captured by an aptamer recognition layer, and then the glycans of targets are oxidized by NaIO4 to convert the 1,2-diol sites into aldehyde groups for the silver deposition-based metallization, followed by the electrochemical stripping assay of the deposited metallic silver for glycoprotein quantification via the established solid-state Ag/AgCl voltammetric process. As GlyMetal can enable the deposition of a large amount of metallic silver and a high signal-to-background ratio can be obtained for the solid-state Ag/AgCl voltammetric stripping assay, the developed GlyMetal-based electrochemical method is applicable to the amplification-free detection of glycoproteins. As a proof of concept, a detection limit of 1.65 pg/mL has been achieved for carcinoembryonic antigen (CEA) detection. In addition to the high selectivity, desirable results have been obtained with respect to the use of the method for CEA detection in serum samples. In consideration of the desirable simplicity, short assay time, and cost-effectiveness of the amplification-free approach, the GlyMetal-based electrochemical method shows great promise in the point-of-care detection of glycoproteins.

An innovative homogeneous electrochemistry coupled with colorimetry dual-model sensing strategy for perfluorooctane sulfonate based on Cu@CuO aerogel nanozyme

By preparing Cu@CuO aerogel as a nanozyme which exhibits prominent peroxidase-like (POD) activity, an innovative homogeneous electrochemistry (HEC) coupled with the colorimetry dual-model sensing strategy is proposed to detect perfluorooctane sulfonate (PFOS) for the first time. Cu@CuO aerogel accelerates the oxidation process of colorless o-phenylenediamine to form yellow 2,3-diaminophenazinc (DAP), and meanwhile, DAP as an electroactive substance creates a reduction peak current upon the electrochemical measurements. Interestingly, in the presence of PFOS, the POD activity of Cu@CuO aerogel is inhibited since the specific coordination between PFOS and Cu(II) can cover the active sites, resulting in the color of the sensing system becoming light and the peak current of DAP decreasing. This innovative dual-mode detection method showed excellent electrochemical detection of PFOS in the concentration range 10.0 ~ 1125.0 nM with a limit of detection (LOD) as low as 3.3 nM and a LOD of 20.8 nM in the colorimetric detection in the range 62.3 ~ 875 nM. Furthermore, the sensor was successfully used for the analysis of real samples with an RSD value  ≤ 6.5%. The successful application of this two-mode sensing method for the determination of PFOS holds promise for the detection of other contaminants in the future.

Digital CRISPR-Powered Biosensor Concept without Target Amplification Using Single-Impact Electrochemistry

The rapid and reliable detection and quantification of nucleic acids is crucial for various applications, including infectious disease and cancer diagnostics. While conventional methods, such as the quantitative polymerase chain reaction are widely used, they are limited to the laboratory environment due to their complexity and the requirement for sophisticated equipment. In this study, we present a novel amplification-free digital sensing strategy by combining the collateral cleavage activity of the Cas12a enzyme with single-impact electrochemistry. In doing so, we modified silver nanoparticles using a straightforward temperature-assisted cofunctionalization process to subsequently detect the collision events of particles released by the activated Cas12a as distinct current spikes on a microelectrode array. The functionalization resulted in stable DNA-AgNP conjugates, making them suitable for numerous biosensor applications. Thus, our study demonstrates the potential of clustered regularly interspaced short palindromic repeats-based diagnostics combined with impact-based digital sensing for a rapid and amplification-free quantification of nucleic acids.

Ultrasensitive Electrochemical Biosensor Based on Efficient PDA-APDMAO Antifouling Interface and Dual-Signal Ratio Strategy for Trace Detection of Alpha-Fetoprotein in Human Serum

In electrochemical analysis, developing biosensors that can resist the nonspecific adsorption of interfering biomolecules in human serum remains a huge challenge, which depends on the design of efficient antifouling materials. Herein, 3-aminopropyldimethylamine oxide (APDMAO) biomimetic zwitterions were prepared as antifouling interfaces. Among them, the unique positive and negative charges (N+-O-) of APDMAO promoted its hydrogen bonding with water molecules, forming a firm hydration barrier that endowed it with strong and stable antifouling performance. Meanwhile, its inherent amino groups could copolymerize with the biomimetic adhesive dopamine to form a thin layer of quinone intermediates, providing conditions for the subsequent binding of aptamers and signal probes. Importantly, the biomimetic APDMAO with functional groups and one-step oxidation characteristics solved the challenges of zwitterionic synthesis and modification, as well as improved biocompatibility of the sensing interface, thereby expanding the application potential of zwitterions as antifouling materials in sensing analysis. Thiol-containing alpha-fetoprotein (AFP) aptamers modified with methylene blue (MB) were coupled under controllable potential, greatly reducing the incubation time, which promoted the productization application of biosensors. In addition, the ratio sensing strategy using MB as internal standard factors and concanavalin-silver nanoparticles (ConA-Ag NPs) as signal probes was introduced to reduce background and instrument interferences, thus improving detection accuracy. On this basis, the proposed antifouling electrochemical biosensor achieved sensitive and accurate AFP detection over a wide dynamic range (10 fg/mL-10 ng/mL), with a low detection limit of 3.41 fg/mL (3σ/m). This work provides positive insights into the development of zwitterionic antifouling materials and clinical detection of liver cancer markers in human serum.

An ultrasensitive electrochemical immunosensor based on meso-PdN NCs and Au NPs/N-CNTs for quantitative cTnI detection

Electrochemical immunosensors have gained considerable attention in detecting human disease markers due to their excellent specificity, high sensitivity, and facile operation. Herein, a rational-designed sandwich-type electrochemical immunosensor is constructed for the sensitive detection of cardiac troponin I (cTnI) using nitrogen-doped carbon nanotubes loaded with gold nanoparticles (Au NPs/N-CNTs) as substrate and highly active mesoporous palladium-nitrogen nanocubes (meso-PdN NCs) as secondary antibody markers. Benefitting from its large specific surface area (638.04 m2 g-1) and high nitrogen content, novel polydopamine (PDA)/ halloysite nanotubes (HNTs) hybrid derived one-dimensional (1D) N-CNTs can provide more binding sites for the in-situ growth of Au NPs to connect Ab1. Furthermore, as an ideal substrate material, Au NPs/N-CNTs exhibit finely tuned mesoporous structures and outstanding conductivity, which facilitate the mass and electron transfer during the electrocatalysis process. Besides, highly concave surfaces and crystalline mesopores of meso-PdN NCs expose more surfaces and crevices, providing abundant reactive sites for H2O2 reduction. Remarkably, the as-obtained immunosensor presented a wide linear range (from 10 fg mL-1 to 100 ng mL-1) and an excellent low detection limit (9.85 fg mL-1). This study may offer new insights into the precise fabrication of efficient electrochemical immunosensors for various clinical diagnosis applications.

Toward Sensitive and Reliable Immunoassays of Marine Biotoxins: From Rational Design to Food Analysis

Marine biotoxins are metabolites produced by algae that can accumulate in shellfish or fish and enter organisms through the food chain, posing a serious threat to biological health. Therefore, accurate and rapid detection is an urgent requirement for food safety. Although various detection methods, including the mouse bioassay, liquid chromatography-mass spectrometry, and cell detection methods, and protein phosphatase inhibition assays have been developed in the past decades, the current detection methods cannot fully meet these demands. Among these methods, the outstanding immunoassay virtues of high sensitivity, reliability, and low cost are highly advantageous for marine biotoxin detection in complex samples. In this work, we review the recent 5-year progress in marine biotoxin immunodetection technologies such as optical immunoassays, electrochemical immunoassays, and piezoelectric immunoassays. With the assistance of immunoassays, the detection of food-related marine biotoxins can be implemented for ensuring public health and preventing food poisoning. In addition, the immunodetection technique platforms including lateral flow chips and microfluidic chips are also discussed. We carefully investigate the advantages and disadvantages for each immunoassay, which are compared to demonstrate the guidance for selecting appropriate immunoassays and platforms for the detection of marine biotoxins. It is expected that this review will provide insights for the further development of immunoassays and promote the rapid progress and successful translation of advanced immunoassays with food safety detection.

An electrochemical ratiometric immunosensor for the detection of NMP22 based on ZIF-8@MWCNTs@Chit@Fc@AuNPs and AuPt-MB

Nuclear matrix protein 22 (NMP22) is one of the most important tumor markers of bladder cancer and is significantly elevated in the urine of bladder cancer patients. Therefore, in this work, a highly sensitive ratiometric electrochemical immunosensor was constructed to detect NMP22 based on ZIF-8@MWCNTs@Chit@Fc@AuNPs composites. ZIF-8 had a large surface area and good adsorption ability. Multi-Walled Carbon Nanotubes (MWCNTs) can optimize the electrical conductivity of ZIF-8, so that the electrode surface of ferrocene (Fc) obtains a stable and strong electrochemical signal. In addition, AuPt-MB provided another strong detection signal methylene blue (MB) while immobilizing the secondary antibody (Ab2) through Au-N and Pt-N bonds. A ratiometric electrochemical sensor was formed based on ZIF-8@MWCNTs@Chit@Fc@AuNPs and AuPt-MB, which showed a great linear connection between IMB/IFc and the logarithmic concentration of NMP22 with a detection limit of 3.33 fg mL-1 (S/N = 3) under optimized specifications in the concentration interval of 0.01 pg mL-1 to 1000 ng mL-1. In addition, the ratiometric immunosensor showed good selectivity and stability.

Recent Advances in Biosensor Technology for Early-Stage Detection of Hepatocellular Carcinoma-Specific Biomarkers: An Overview

Hepatocellular carcinoma is currently the most common malignancy of the liver. It typically occurs due to a series of oncogenic mutations that lead to aberrant cell replication. Most commonly, hepatocellular carcinoma (HCC) occurs as a result of pre-occurring liver diseases, such as hepatitis and cirrhosis. Given its aggressive nature and poor prognosis, the early screening and diagnosis of HCC are crucial. However, due to its plethora of underlying risk factors and pathophysiologies, patient presentation often varies in the early stages, with many patients presenting with few, if any, specific symptoms in the early stages. Conventionally, screening and diagnosis are performed through radiological examination, with diagnosis confirmed by biopsy. Imaging modalities tend to be limited by their requirement of large, expensive equipment; time-consuming operation; and a lack of accurate diagnosis, whereas a biopsy's invasive nature makes it unappealing for repetitive use. Recently, biosensors have gained attention for their potential to detect numerous conditions rapidly, cheaply, accurately, and without complex equipment and training. Through their sensing platforms, they aim to detect various biomarkers, such as nucleic acids, proteins, and even whole cells extracted by a liquid biopsy. Numerous biosensors have been developed that may detect HCC in its early stages. We discuss the recent updates in biosensing technology, highlighting its competitive potential compared to conventional methodology and its prospects as a tool for screening and diagnosis.

Two Birds with one Stone: Dual-mode immunoassay constructed using a novel emitter ethylene glycol-induced perylene diimide and a multifunctional ANS probe

Perylene diimide (PDI) is a readily reducible electron-deficient dye that exhibits strong photoluminescent properties, providing new opportunities for synthesizing novel electrochemiluminescence (ECL) emitters. In this study, ethylene glycol (EG) was used to induce the self-assembly of PDI supramolecules for the preparation of ultrathin EG-PDI nanosheets characterized by low crystallinity and weak stacking interaction. Notably, EG-PDI integrates luminescent and catalytic functions into one device, accelerating the interfacial electron transfer and the faster charge transfer kinetics of EG-PDI with K2S2O8. Furthermore, the narrow band gap of EG-PDI facilitates its excitation at an ultra-low potential (-0.3 V). To improve the efficiency of tumor marker analysis, multifunctional Au nanostars (ANS) was introduced both as an energy acceptor of the ECL system and a probe for the photothermal system. Dual-mode immunoassay have demonstrated superior analytical performance in detecting alpha-fetoprotein (AFP), meeting the requirements of modern clinical diagnostics in resource-limited environments.

Impact electrochemistry for biosensing: advances and future directions

Impact electrochemistry allows for the investigation of the properties of single entities, ranging from nanoparticles (NPs) to soft bio-particles. It has introduced a novel dimension in the field of biological analysis, enhancing researchers' ability to comprehend biological heterogeneity and offering a new avenue for developing novel diagnostic devices for quantifying biological analytes. This review aims to summarize the recent advancements in impact electrochemistry-based biosensing over the past two to three years and provide insights into the future directions of this field.

Homogeneous and Label-Free Detection and Monitoring of Protein Kinase Activity Using the Impact Electrochemistry of Silver Nanoparticles

Protein kinase activity correlates closely with that of many human diseases. However, the existing methods for quantifying protein kinase activity often suffer from limitations such as low sensitivity, harmful radioactive labels, high cost, and sophisticated detection procedures, underscoring the urgent need for sensitive and rapid detection methods. Herein, we present a simple and sensitive approach for the homogeneous detection of protein kinase activity based on nanoimpact electrochemistry to probe the degree of aggregation of silver nanoparticles (AgNPs) before and after phosphorylation. Phosphorylation, catalyzed by protein kinases, introduces two negative charges into the substrate peptide, leading to alterations in electrostatic interactions between the phosphorylated peptide and the negatively charged AgNPs, which, in turn, affects the aggregation status of AgNPs. Via direct electro-oxidation of AgNPs in nanoimpact electrochemistry experiments, protein kinase activity can be quantified by assessing the impact frequency. The present sensor demonstrates a broad detection range and a low detection limit for protein kinase A (PKA), along with remarkable selectivity. Additionally, it enables monitoring of PKA-catalyzed phosphorylation processes. In contrast to conventional electrochemical sensing methods, this approach avoids the requirement of complex labeling and washing procedures.

Ternary electrochemiluminescence quenching effects of CuFe2O4@PDA-MB towards self-enhanced Ru(dcbpy)32+ functionalized 2D metal-organic layer and application in carcinoembryonic antigen immunosensing

BACKGROUND

Carcinoembryonic antigen (CEA) is a significant glycosylated protein, and the unusual expression of CEA in human serum is used as a tumor marker in the clinical diagnosis of many cancers. Although scientists have reported many ways to detect CEA in recent years, such as electrochemistry, photoelectrochemistry, and fluorescence, their operation is complex and sensitivity is average. Therefore, finding a convenient method to accurately detect CEA is significance for the prevention of malignant tumors. With high sensitivity, quick reaction, and low background, electrochemiluminescence (ECL) has emerged as an essential method for the detection of tumor markers in blood.

RESULTS

In this work, a "signal on-off" ECL immunosensor for sensitive analysis of CEA ground on the ternary extinction effects of CuFe2O4@PDA-MB towards a self-enhanced Ru(dcbpy)32+ functionalized metal-organic layer [(Hf)MOL-Ru-PEI-Pd] was prepared. The high ECL efficiency of (Hf)MOL-Ru-PEI-Pd originated from the dual intramolecular self-catalysis, including intramolecular co-reaction between polyethylenimine (PEI) and Ru(dcbpy)32+. At the same time, loading Pd NPs onto (Hf)MOL-Ru-PEI could not only improve the electron transfer ability of (Hf)MOL-Ru-PEI, but also provide more active sites for the reaction of Ru(dcbpy)32+ and PEI. In the presence of CEA, CuFe2O4@PDA-MB-Ab2 efficiently quenches the excited states of (Hf)MOL-Ru-PEI-Pd by PDA, Cu2+, and methylene blue (MB) via energy and electron transfer, leading to an ECL signal decrease. Under optimal conditions, the proposed CEA sensing strategy showed satisfactory properties ranging from 0.1 pg mL-1 to 100 ng mL-1 with a detection limit of 20 fg mL-1.

SIGNIFICANCE

The (Hf)MOL-Ru-PEI-Pd and CuFe2O4@PDA-MB were prepared in this work might open up innovative directions to synthesize luminescence-functionalized MOLs and effective quencher. Besides, the ECL quenching mechanism of Ru(dcbpy)32+ by MB was successfully explained by the inner filter effect (ECL-IFE). At last, the proposed immunosensor exhibits excellent repeatability, stability, and selectivity, and may provide an attractive way for CEA and other disease markers determination.

Highly-oxidizing Au@MnO2-X nanozymes mediated homogeneous electrochemical detection of organophosphorus independent of dissolved oxygen

Traditional oxidase-like (OXD) nanozymes rely primarily on O2-mediated superoxide anion (O2·-) process for catalytic oxidation and organophosphorus (Ops) detection. While during the actual detection process, the concentration of O2 is inconstant that can be easily changed with the external environment, distorting detection results. Herein, highly-oxidizing Au@MnO2-X nanozymes with core-shell nanostructure are designed which trigger substantial electron transfer from inner Au core to outer ultrathin MnO2-X layer. According to experimental and theoretical calculations, the core-shell nanostructure and ultrathin MnO2-X of Au@MnO2-X result in the large surface defects, high oxygen vacancies and MnIII ratios. The specially structured Au@MnO2-X nanozymes are therefore highly-oxidizing and the catalytic oxidation can be completed merely through electrons transferring instead of the O2-mediated O2·- process. Based on this, an oxygen independent and ultrasensitive nanozyme-based sensor is established using homogeneous electrochemistry (HEC), its Ops is detected at a LOD of 0.039 ng mL-1. Combined with the UV-vis spectrum of 3,3',5,5'-tetramethylbenzidine (TMB), the linear discriminant analysis of five Ops i.e., Ethion, Omethoate, Diazinon, Chlorpyrifos methyl and Dipterex has achieved superior discrimination results. Therefore, HEC based on strong oxidizing nanozymes provide a new avenue for the development of high-performance electrochemical sensors and demonstrate potential applicability to pesticide residue determination in real samples.

Sensitive quantification of mercury ions in real water systems based on an aggregation-collision electrochemical detection

Nanoparticle impact electrochemistry (NIE) is an emerging electroanalytical technique that has been utilized to the sensitive detection of a wide range of biological species. So far, the NIE based trace ion detection is largely unexplored due to the lack of effective signal amplification strategies. We herein develop an NIE-based electrochemical sensing platform that utilizes T-Hg2+-T coordination induced AgNP aggregation to detect Hg2+ in aqueous solution. The proposed aggregation-collision strategy enables highly sensitive and selective detection. A dual-mode analysis based on the change in impact frequency and oxidative charge of the anodic oxidation of the AgNPs in NIE allows for more accurate self-validated quantification. Furthermore, the current NIE-based sensor demonstrates reliable analysis of Hg2+ of real water samples, showing great potential for practical environmental monitoring and point-of-care testing (POCT) applications.

Homogeneous immunoassay utilizing fluorescence resonance energy transfer from quantum dots to tyramide dyes deposited on full immunocomplexes

There is an urgent need for homogeneous immunoassays that offer sufficient sensitivity for routine clinical practice. In this study, we have developed a highly sensitive, fluorescence resonance energy transfer (FRET)-based homogeneous immunoassay. Unlike previous FRET-based homogeneous immunoassays, where acceptors were attached to antibody molecules located far from the donor, we employed acceptors to label the entire sandwich-structured immunocomplex, including two antibodies and one antigen. As a result, the FRET signal was amplified by a factor of 10, owing to the reduced distance between the donor and acceptors. We validated our method by quantifying carcinoembryonic antigen (CEA) and α-fetoprotein (AFP) in PBS buffer and blank plasma. The limits of detection (LOD) for CEA and AFP in both PBS buffer and blank plasma were comparable, reaching sub-femtomolar levels. Furthermore, we successfully quantified CEA and AFP in three human plasma samples, thereby confirming the reliability of our method for clinical applications.

Multiplex Assays of MicroRNAs by Using Single Particle Electrochemical Collision in a Single Run

It is important to quantify multiple biomarkers in a single run due to the advantages of precious samples and diagnostic accuracy. Based on the distinguishability of two types of current signals from single particle electrochemical collision (SPEC), step-type current transients produced by Pt nanoparticles (PtNPs) catalyzed hydrazine oxidation and peak-type current transients produced by Ag nanoparticles (AgNPs) oxidation, a kind of multiplex immunoassay of target microRNAs (miRNA-21 and Let-7a) have been established during SPEC in a single run. When the single-stranded DNA (ssDNA1) that was perfectly complementary to miRNA-21 was coupled to the surface of PtNPs, the SPEC of PtNPs electrocatalysis was inhibited and the step-type current transients disappeared, while the single-stranded DNA (ssDNA2) that was perfectly complementary to Let-7a was coupled to the surface of AgNPs, the SPEC of AgNPs oxidation was inhibited, and the peak-type current transients disappeared, thus the signals were in the "off" state at this time. After that, miRNA-21 and Let-7a were added into solution, complementary base pairing disrupted the weak DNA-NP interaction and restored the electrocatalysis of PtNPs and the electrooxidation of AgNPs, and the step-type current signals and peak-type current signals were in the "on" state. Moreover, the frequencies from two different recovered signals (PtNPs catalysis and AgNPs oxidation) corresponded to the amount of added miRNA-21 and Let-7a, thus a multiplex immunoassay method for dual quantification of miRNA-21 and Let-7a in a single run was established.

Enhanced Single-Particle Collision Electrochemistry at Polysulfide-Functionalized Microelectrodes for SARS-CoV-2 Detection

Single-particle collision electrochemistry (SPCE) has shown great promise in biosensing applications due to its high sensitivity, high flux, and fast response. However, a low effective collision frequency and a large number of interfering substances in complex matrices limit its broad application in clinical samples. Herein, a novel and universal SPCE biosensor was proposed to realize sensitive detection of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) based on the collision and oxidation of single silver nanoparticles (Ag NPs) on polysulfide-functionalized gold ultramicroelectrodes (Ps-Au UMEs). Taking advantage of the strong interaction of the Ag-S bond, collision and oxidation of Ag NPs on the Ps-Au UME surface could be greatly promoted to generate enhanced Faraday currents. Compared with bare Au UMEs, the collision frequency of Ps-Au UMEs was increased by 15-fold, which vastly improved the detection sensitivity and practicability of SPCE in biosensing. By combining magnetic separation, liposome encapsulation release, and DNAzyme-assisted signal amplification, the SPCE biosensor provided a dynamic range of 5 orders of magnitude for spike proteins with a detection limit of 6.78 fg/mL and a detection limit of 21 TCID50/mL for SARS-CoV-2. Furthermore, SARS-CoV-2 detection in nasopharyngeal swab samples of infected patients was successfully conducted, indicating the potential of the SPCE biosensor for use in clinically relevant diagnosis.