Propagation of Concentration Polarization Affecting Ions Transport in Branching Nanochannel Array

Light-Enhanced Osmotic Energy Harvester Using Photoactive Porphyrin Metal-Organic Framework Membranes

High ion selectivity and permeability, as two contradictory aspects for the membrane design, highly hamper the development of osmotic energy harvesting technologies. Metal-organic frameworks (MOFs) with ultra-small and high-density pores and functional surface groups show great promise in tackling these problems. Here, we propose a facile and mild cathodic deposition method to directly prepare crack-free porphyrin MOF membranes on a porous anodic aluminum oxide for osmotic energy harvesting. The abundant carboxyl groups of the functionalized porphyrin ligands together with the nanoporous structure endows the MOF membrane with high cation selectivity and ion permeability, thus a large output power density of 6.26 W m^-2 is achieved. The photoactive porphyrin ligands further lead to an improvement of the power density to 7.74 W m^-2 upon light irradiation. This work provides a promising strategy for the design of high-performance osmotic energy harvesting systems.

Structural Engineering of the Barrier Oxide Layer of Nanoporous Anodic Alumina for Iontronic Sensing

The hemispherical barrier oxide layer (BOL) closing the bottom tips of hexagonally distributed arrays of cylindrical nanochannels in nanoporous anodic alumina (NAA) membranes is structurally engineered by anodizing aluminum substrates in three distinct acid electrolytes at their corresponding self-ordering anodizing potentials. These nanochannels display a characteristic ionic current rectification (ICR) signal between high and low ionic conduction states, which is determined by the thickness and chemical composition of the BOL and the pH of the ionic electrolyte solution. The rectification efficiency of the ionic current associated with the flow of ions across the anodic BOL increases with its thickness, under optimal pH conditions. The inner surface of the nanopores in NAA membranes was chemically modified with thiol-terminated functional molecules. The resultant NAA-based iontronic system provides a model platform to selectively detect gold metal ions (Au³⁺) by harnessing dynamic ICR signal shifts as the core sensing principle. The sensitivity of the system is proportional to the thickness of the barrier oxide layer, where NAA membranes produced in phosphoric acid at 195 V with a BOL thickness of 232 ± 6 nm achieve the highest sensitivity and low limit of detection in the sub-picomolar range. This study provides exciting opportunities to engineer NAA structures with tailorable ICR signals for specific applications across iontronic sensing and other nanofluidic disciplines.

Electrical monitoring of infection biomarkers in chronic wounds using nanochannels

Chronic wounds represent an important healthcare challenge in developed countries, being wound infection a serious complication with significant impact on patients' life conditions. However, there is a lack of methods allowing an early diagnosis of infection and a right decision making for a correct treatment. In this context, we propose a novel methodology for the electrical monitoring of infection biomarkers in chronic wound exudates, using nanoporous alumina membranes. Lysozyme, an enzyme produced by the human immune system indicating wound infection, is selected as a model compound to prove the concept. Peptidoglycan, a component of the bacterial layer and the native substrate of lysozyme, is immobilized on the inner walls of the nanochannels, blocking them both sterically and electrostatically. The steric blocking is dependent on the pore size (20-100 nm) and the peptidoglycan concentration, whereas the electrostatic blocking depends on the pH. The proposed analytical method is based on the electrical monitoring of the steric/electrostatic nanochannels unblocking upon the specific degradation of peptidoglycan by lysozyme, allowing to detect the infection biomarker at 280 ng/mL levels, which are below those expected in wounds. The low protein adsorption rate and thus outstanding filtering properties of the nanoporous alumina membranes allowed us to discriminate wound exudates from patients with both sterile and infected ulcers without any sample pre-treatment usually indispensable in most diagnostic devices for analysis of physiological fluids. Although size and charge effects in nanochannels have been previously approached for biosensing purposes, as far as we know, the use of nanoporous membranes for monitoring enzymatic cleavage processes, leading to analytical systems for the specific detection of the enzymes has not been deeply explored so far. Compared with previously reported methods, our methodology presents the advantages of no need of neither bioreceptors (antibodies or aptamers) nor competitive assays, low matrix effects and quantitative and rapid analysis at the point-of-care, being also of potential application for the determination of other protease biomarkers.

Polydopamine-Induced Modification on the Highly Charged Surface of Asymmetric Nanofluidics: A Strategy for Adjustable Ion Current Rectification Properties

Surface charge effects in nanoconfines is one of the fundamentals in the ion current rectification (ICR) of nanofluidics, which provides entropic driving force by asymmetric surface charges and causes ion enrichment/depletion by the electrostatic interaction of fixed surface charges. However, the surface charge effect causes a significant electrostatic repulsion in nanoconfines, restricting additional like charge or elaborate chemistry on the highly charged confined surface, which limits ICR manipulation. Here, we use polydopamine (PDA), a nearly universal adhesive, that adheres to the highly positive-charged poly(ethyleneimine) (PEI) gel network in a nanochannel array. PDA enhances the ICR effect from a low rectification ratio of 9.5 to 92.6 by increasing the surface charge and hydrophobicity of the PEI gel network and, meanwhile, shrinking its gap spacing. Theoretical and experimental results demonstrate the determinants of the fixed surface charge in the enrichment/depletion region on ICR properties, which is adjustable by PDA-induced change in a nanoconfined environment. Chemically active PDA brings Au nanoparticles by chloroauric reduction for further hydrophobization and the modification of negative-charged DNA complexes in nanochannels, whereby ICR effects can be manipulated in versatile means. The results describe an adjustable and versatile strategy for adjusting the ICR behaviors of nanofluidics by manipulating local surface charge effects using PDA.

Rectification Correlation between Water and Ions through Asymmetric Graphene Channels

Rectification phenomena occurring in asymmetric channels are essential for the design of novel nanofluidic devices such as nanodiodes. Previous studies mostly focus on ion current rectification, while its correlations with water dynamics are rarely explored. In this work, we analyze the transport of water and ions through asymmetric graphene channels under the drive of electric fields using molecular dynamics simulations. A key observation is that the water flux also exists in the rectification phenomenon that follows the ion flux behaviors because of their dynamical coupling relation in electric fields, and both their rectification ratios exhibit maximum behaviors with the change of the channel opening ratio. This is because the ion dehydration is highly asymmetric for small opening ratios. In addition, the cations and anions have distinct rectification ratios that are strongly dependent on the field strength, where the values for anions can even be 1-2 orders larger. This can be attributed to their different hydration shell and dehydration processes in the graphene channel. The translocation time of ions displays a power law relation with the field strength, in agreement with the prediction by Langevin dynamics. Due to the exclude-volume effect, the occupancy of water and ions shows a clear competition and thus changes in an opposite trend with the field strength. Our results demonstrate the rectification correlations between water and ions, and tuning the geometry of graphene channels provides a simple and robust new route to achieve high rectification ratios.

Exceeding ohmic scaling by more than one order of magnitude with a 3D ion concentration polarization system

We report an ion concentration polarization (CP) system that exceeds ohmic scaling, a barrier that has stood for more than four decades, by more than one order of magnitude. CP is used in many important applications, including the enrichment of trace analytes in microfluidic systems and water purification by electrodialysis. The mechanisms that control the current through these systems have been largely discovered, but the reduced currents and loss of efficiency imparted by the high resistance of the CP ion depleted zone have not been overcome. To obtain high currents, an ion permselective element with a microscale cross-section is interfaced with a macroscale reservoir. Confocal fluorescence microscopy and microparticle tracking velocimetry (μ-PTV) are used to characterize the depleted zone that emanates vertically from the CP inducing nanoporous gel into the macroscale reservoir. The shape and growth of the depleted zone and velocity in the surrounding bulk solution are consistent with natural convection being the driver of the depleted zone morphology and eliminating the high resistance created by the depleted zone in 1D and 2D systems. Once the resistance of the depleted zone is negated, the high currents are hypothesized to result from enhancement of counter-ion concentration in the nanoporous gel-filled microchannel. In contrast with conventional systems, the current increases monotonically and remains stable at a high quasi-steady level in the reported systems. These results may be used to increase the efficiency and performance of future devices that utilize CP, while the ability to collect purified water with this geometry is demonstrated.

Electrochemically Switchable Double-Gate Nanofluidic Logic Device as Biomimetic Ion Pumps

Biological ion pumps with two separate gates can actively transport ions against the concentration gradient. Developing an artificial nanofluidic device with multiple responsive sites is of great importance to improve its controllability over ion transport to further explore its logic function and mimic the biological process. Here, we propose an electrochemical polymerization method to fabricate electrochemically switchable double-gate nanofluidic devices. The ion transport of the double-gate nanofluidic device can be in situ and reversibly switched among four different states. The logic function of this nanofluidic device is systematically investigated by assuming the gate state as the input and the transmembrane ionic conductance as the output. A biomimetic electrochemical ion pump is then established by alternately applying two different specific logic combinations, realizing an active ion transport under a concentration gradient. This work would inspire further studies to construct complex logical networks and explore bioinspired ion pump systems.

Ionic Current Rectification of Porous Anodic Aluminum Oxide (AAO) with a Barrier Oxide Layer

Synthetic nanofluidic diodes with highly nonlinear current-voltage characteristics are currently of particular interest because of their potential applications in biosensing, separation, energy harvesting, and nanofluidic electronics. We report the ionic current rectification (ICR) characteristics of a porous anodic aluminum oxide membrane, whose one end of the nanochannels is closed by a barrier oxide layer. The membrane exhibits intriguing pH-dependent ion transport characteristics, which cannot be explained by the conventional surface charge governed ionic transport mechanism. We reveal experimentally and theoretically that the space charge density gradient present across the 40-nm-thick barrier oxide is mainly responsible for the evolution of ICR. Based on our findings, we demonstrate the formation of a single 5-8-nm-sized pore in each hexagonal cell of the barrier oxide. The present work would provide valuable information for the design and fabrication of future ultrathin nanofluidic devices without being limited by the engineering of the nanochannel geometry or surface charge.

Ion current rectification behavior of a nanochannel having nonuniform cross-section

Due to its versatile applications in biotechnology, ion current rectification (ICR), which arises from the asymmetric nature of the ion transport in a nanochannel, has drawn much attention, recently. Here, the ICR behavior of a pH-regulated nanochannel comprising two series connected cylindrical nanochannels of different radii is examined theoretically, focusing on the influences of the radii ratio, the length ratio, the bulk concentration, and the solution pH. The results of numerical simulation reveal that the rectification factor exhibits a local maximum with respect to both the radii ratio and the length ratio. The values of the radii ratio and the length ratio at which the local maximum in the rectification factor occur depend upon the level of the bulk salt concentration. The rectification factor also shows a local maximum as the solution pH varies. Among the factors examined, the solution pH influences the ICR behavior of the nanochannel most significantly.

In Situ Growth Visualization Nanochannel Membrane for Ultrasensitive Copper Ion Detection under the Electric Field Enrichment

The transport of ionic species through nanochannels plays an important role in the basic research and practical application of nanofluidic devices. Here, a visualized CdSe@ZIF-8/PAA nanochannel membrane was created by employing in situ growth of zeolite imidazole skeleton (ZIF-8) and CdSe quantum dots (CdSe QDs) on a porous anodized aluminum oxide (PAA) membrane surface using CdSe QDs, 2-methylimidazole, and zinc nitrate as the precursor solvents. ZIF-8 is a kind of metal-organic framework, a microporous material that possesses strong metal adsorption capacity. In addition, CdSe quantum dots have fluorescent properties. The nanochannel membrane detects copper ions (Cu²⁺) by quenching the fluorescence intensity by the interaction between Cu²⁺ and Se and S atoms. The direct potential of 5 V was applied to achieve Cu²⁺ enrichment at the nanochannel interface, and the fluorescence change was observed. The CdSe@ZIF-8/PAA nanochannel membrane has a good linear range of concentration (0.01 pM-1 μM) for Cu²⁺ detection. With the help of nanochannel enrichment, its detection limit reaches 4 fM. In addition, this nanochannel membrane has good selectivity for Cu²⁺.

Regulating Ion Transport in a Nanochannel with Tandem and Parallel Structures via Concentration Polarization

The unique phenomena of ion selectivity and ion current rectification (ICR) in nanofluidics have been widely used to construct bioinspired channels and organs, sensors, and power generators. However, the excellent performance of a single nanochannel does not show a linear increase when it is scaled up into multiple nanochannels in tandem and parallel structure, and in some cases, it even shows a reverse trend. Understanding of this scaling-up inconsistency in nanofluidics is essential to the design of functional devices. Here, we provide a method for investigating the ion transport properties in multiple nanochannels in tandem and parallel connections. We find that interfacial resistance caused by ion concentration polarization (ICP) in tandem and parallel nanochannels has a significant impact on ICR, showing a nonlinear scaling-up feature with the tandem number and a decreased trend with the parallel number, which is not expected in electronic devices. We further verify that it is feasible to regulate ion transport in tandem and parallel nanochannels by adding gap distances between nanochannels in tandem and parallel structures to decouple the ICP region between nanochannels. This study provides fundamental insights into the ion transport properties in nanofluidic circuits, which hold promise for the design of high-performance nanofluidic devices in the fields of separation, energy, and sensors.

Regulating the ionic current rectification behavior of branched nanochannels by filling polyelectrolytes

The overlapping of the electric double layer (EDL) in a nanochannel yields many interesting and significant electrokinetic phenomena such as ionic current rectification (ICR), which occurs only at a relatively low bulk salt concentration (∼1 mM) where the EDL thickness is comparable to the nanochannel size. In an attempt to raise this concentration to higher levels and the ICR performance improved appreciably, a branched nanochannel filled with polyelectrolytes (PEs) is proposed in this study. We show that these objectives can be achieved by choosing appropriate PE. For example, if the stem side of an anodic aluminun oxide nanochannel is filled with polystyrene sulfonate (PSS) an ICR ratio up to 850 can be obtained at 1 mM, which was not reported in previous studies. Taking account of the effect of electroosmotic flow, the underlying mechanisms of the ICR phenomena observed are discussed and the influences of the solution pH, the bulk salt concentration, and how the region(s) of a nanochannel is filled with PE examined. We show that the ICR behavior of a branched nanochannel can be modulated satisfactorily by filling highly charged PE and the solution pH.

Asymmetric Membrane for Digital Detection of Single Bacteria in Milliliters of Complex Water Samples

In this work, we introduce an asymmetric membrane as a simple and robust nanofluidic platform for digital detection of single pathogenic bacteria directly in 10 mL of unprocessed environmental water samples. The asymmetric membrane, consisting of uniform micropores on one side and a high density of vertically aligned nanochannels on the other side, was prepared within 1 min by a facile method. The single membrane covers all the processing steps from sample concentration, purification, and partition to final digital loop-mediated isothermal amplification (LAMP). By simple filtration, bacteria were enriched and partitioned inside the micropores, while inhibitors typically found in the environmental samples ( i.e., proteins, heavy metals, and organics) were washed away through the nanochannels. Meanwhile, large particles, indigenous plankton, and positively charged pollutants in the samples were excluded by using a sacrificial membrane stacked on top. After initial filtration, modified LAMP reagents, including NaF and lysozyme, were loaded onto the membrane. Each pore in the asymmetric membrane functioned as an individual nanoreactor for selective, rapid, and efficient isothermal amplification of single bacteria, generating a bright fluorescence for direct counting. Even though high levels of inhibitors were present, absolute quantification of Escherichia coli and Salmonella directly in an unprocessed environmental sample (seawater and pond water) was achieved within 1 h, with sensitivity down to single cell and a dynamic range of 0.3-10000 cells/mL. The simple and low-cost analysis platform described herein has an enormous potential for the detection of pathogens, exosomes, stem cells, and viruses as well as single-cell heterogeneity analysis in environmental, food, and clinical research.

Mussel-inspired fabrication of porous anodic alumina nanochannels and a graphene oxide interfacial ionic rectification device

A mussel-inspired new interfacial ionic rectification device is fabricated using porous anodic alumina nanochannels and graphene oxide via dopamine polymerization.

Asymmetric Nanochannel-Ionchannel Hybrid for Ultrasensitive and Label-Free Detection of Copper Ions in Blood

Nanochannel/nanopre based analysis methods have attracted increasing interest in recent years due to their exquisite ability to reveal changes in molecular volume. In this work, a highly asymmetric nanochannel-ionchannel hybrid coupled with an electrochemical technique was developed for copper ion (Cu²⁺) detection. Polyglutamic acid (PGA) was modified in a nanochannel array of porous anodic alumina (PAA). When different concentrations of Cu²⁺ were introduced into the nanochannel-ionchannel hybrid in a neutral environment, a Cu²⁺-PGA chelation reaction occurs, resulting in varied current-potential (I-V) properties of the nanochannel-ionchannel hybrid. When PAA was immersed in a low pH solution, the Cu²⁺-PGA complex dissociated. On the basis of the change in ionic current, a label-free assay for Cu²⁺ was achieved along with the ability to regenerate and reuse the constructed platform. Because of the unique mass transfer property of the nanochannel-ionchannel hybrid combined with the highly amplified ionic current magnitude of the nanochannel array, significantly increased assay sensitivity was achieved, as expected. To evaluate the applicability of the present methodology for detecting Cu²⁺ in a real sample, the Cu²⁺ content in real blood samples was analyzed. The results demonstrate that the present method shows excellent selectivity with high sensitivity toward Cu²⁺ detection in real blood samples.

Nanochannels as molecular check valves

A molecular check valve is a nanomachine that enables unidirectional molecular transport. In this work, we report a novel molecular check valve fabricated by asymmetric modification of a silica nanoporous membrane (SNM) consisting of parallel nanochannels with a diameter of 2-3 nm. Asymmetric modification refers to the thermal deposition of hydrophobic polydimethylsiloxane (PDMS) only on one side of the SNM to generate hydrophobic nanoorifices. Such an asymmetric nanostructure, designated as PDMS-SNM, could synergistically exert a hydrophobic force on the molecules by PDMS nanoorifices and an electrostatic force by naked silica nanochannels, resulting in unidirectional molecular transport under specific circumstances. Typically, only positively charged molecules were able to transport across the PDMS-SNM from the PDMS nanoorifice side, while backward transport from the other side was prohibited. In the former case, positively charged molecules were subject to electrostatic attraction from naked silica channels, which could exceed the hydrophobic rejection from PDMS nanoorifices to pull the molecule across the PDMS-SNM. However, in the latter case the electrostatic attraction is no longer a driving force to overcome the hydrophobic rejection from PDMS nanoorifices to promote the molecular transport. On the other hand, the PDMS-SNM based molecular check valve can be shut down to prevent any molecular transport from either side of the PDMS-SNM under certain conditions, such as a high salt concentration or an appropriate pH (e.g., pH 3). We believe that it could be applied to convert natural fluctuation energy into directed motion, as well as to prevent backward transport in batteries and fuel cells.

Ultrasensitive Capture, Detection, and Release of Circulating Tumor Cells Using a Nanochannel-Ion Channel Hybrid Coupled with Electrochemical Detection Technique

With the growing demands of the early, accurate, and sensitive diagnosis for cancers, the development of new diagnostic technologies becomes increasingly important. In this study, we proposed a strategy for efficient capture and sensitive detection of circulating tumor cells (CTCs) using an array nanochannel-ion channel hybrid coupled with an electrochemical detection technique. The aptamer probe was immobilized on the ion channel surface to couple with the protein overexpressed on the CTCs membrane. Through this special molecular recognition, CTCs can be selectively captured. The trapped CTCs cover the ion channel entrance efficiently, which will dramatically block the ionic flow through channels, resulting in a varied mass-transfer property of the nanochannel-ion channel hybrid. On the basis of the changed mass-transfer properties, the captured CTCs can be sensitively detected using the electrochemical linear sweep voltammetry technique. Furthermore, due to the amplified response of array channels compared to that of a single channel, the detection sensitivity can be enhanced greatly. The results showed that acute leukemia CCRF-CEM (a type of CTC) concentration as low as 100 cells mL^-1 can be successfully captured and detected. The present method provides a simple, sensitive, and label-free technique for CTCs capture, detection, and release, which would hold great potential in the early clinical diagnosis and treatment of cancers.

Sequential Vapor Infiltration Treatment Enhances the Ionic Current Rectification Performance of Composite Membranes Based on Mesoporous Silica Confined in Anodic Alumina

Ionic current rectification of nanofluidic diode membranes has been studied widely in recent years because it is analogous to the functionality of biological ion channels in principle. We report a new method to fabricate ionic current rectification membranes based on mesoporous silica confined in anodic aluminum oxide (AAO) membranes. Two types of mesostructured silica nanocomposites, hexagonal structure and nanoparticle stacked structure, were used to asymmetrically fill nanochannels of AAO membranes by a vapor-phase synthesis (VPS) method with aspiration approach and were further modified via sequence vapor infiltration (SVI) treatment. The ionic current measurements indicated that SVI treatment can modulate the asymmetric ionic transport in prepared membranes, which exhibited clear ionic current rectification phenomenon under optimal conditions. The ionic current rectifying behavior is derived from the asymmetry of surface conformations, silica species components, and hydrophobic wettability, which are created by the asymmetrical filling type, silica depositions on the heterogeneous membranes, and the condensation of silanol groups. This article provides a considerable strategy to fabricate composite membranes with obvious ionic current rectification performance via the cooperation of the VPS method and SVI treatment and opens up the potential of mesoporous silica confined in AAO membranes to mimic fluid transport in biological processes.

Salt gradient driven ion transport in solid-state nanopores: the crucial role of reservoir geometry and size

The crucial influence of the reservoir geometry and size on the salt gradient driven ion transport in solid-state nanopores is unraveled.