Polyaniline-Based Photothermal Paper Sensor for Sensitive and Selective Detection of 2,4,6-Trinitrotoluene

5-Oxo-7,7-Dimethyl-5,6,7,8-Tetrahydro-4-H-Chromene Bearing N, N-Dimethylaniline as Turn-Off Fluorescent Chemosensor for Picric Acid in Real Water Sample

We have synthesized a one-pot, three-component pyran-based fluorescence chemosensor using onion extract as a green catalyst. The confirmed structure of the 1:2 binding of receptor SPR-2-picric acid adduct revealed that the pyran-based receptor accommodated two guest picric acid molecules through non-covalent interactions. UV-Vis and fluorescence spectroscopy show high selectivity and sensitivity towards picric acid. The 1D/2D NMR and Job's plot analysis show the complexation and stoichiometric binding of the receptor SPR-2 with picric acid are 1:2. The 1H NMR spectral studies confirm that the formation of receptor SPR-2-picric acid adduct via weak hydrogen bonding. The cooperativity of the receptor SPR-2-picric acid adduct shows negative cooperativity due to the weak hydrogen bonding of receptor SPR-2 and picric acid. Further, the density functional theory (DFT) confirmed the molecular level interaction of the SPR-2 and receptor SPR-2-Picric acid adduct. The receptor was effectively used to assess picric acid concentrations in real water samples.

NIR-II-Absorbing TMB Derivative for 1064 nm-Excited Photothermal Immunoassay

Materials exhibiting strong absorption in the NIR-II region are appealing for photothermal conversion-based imaging, diagnosis, and therapy, due to better thermal effect and decreased absorption of water in such a region. 3,3',5,5'-Tetramethylbenzidine (TMB), the typical substrate in ELISA, has been explored in photothermal immunoassay, since its oxidation product (oxTMB) is photothermally active in the NIR region. However, its absorption at 1064 nm (the most often used laser wavelength in photothermal studies) is not appreciable, thus limiting the assay sensitivity. Here, we proposed a derivative of TMB (3,3'-dimethoxy-5,5'-dimethylbenzidine, 2-OCH3) bearing higher NIR-II absorption for 1064 nm-excited photothermal immunoassay. Since electron-donating groups can help decrease the energy gap of molecules (here -CH3 → -OCH3), the oxidation product of 2-OCH3 exhibited substantially red-shifted absorption as compared with oxTMB, leading to a more than twofold higher absorption coefficient at 1064 nm. As a result, 2-OCH3 showed enhanced sensitivity over TMB in a photothermal immunoassay (PTIA), yielding a limit of detection (LOD) of 0.1 ng/mL for prostate-specific antigen (PSA). The feasibility of 2-OCH3-based PTIA for diagnosis was further validated by analyzing PSA in 61 serum samples. Considering its superior photothermal performance, 2-OCH3 can be explored for a broad range of photothermal applications.

Metal-mediated Fe3O4@polydopamine-aptamer capture nanoprobe coupling multifunctional MXene@Au@Pt nanozyme for direct and portable photothermal analysis of circulating breast cancer cells

Breast cancer (BC) is the most common cancer in the world and circulating tumor cells (CTCs) are reliable biomarkers for early breast cancer diagnosis in a non-invasive manner. However, effective isolation and sensitive detection of BC-CTCs by portable devices in human blood samples are extremely challenging. Herein, we proposed a highly sensitive and portable photothermal cytosensor for direct capture and quantification of BC-CTCs. To achieve efficient isolation of BC-CTCs, aptamer functionalized Fe₃O₄@PDA nanoprobe was facilely prepared through Ca²⁺-mediated DNA adsorption. To further detect the captured BC-CTCs with high sensitivity, multifunctional two-dimensional Ti₃C₂@Au@Pt nanozyme was synthesized, which not only possessed superior photothermal effect but also exhibited high peroxidase-like activity for catalyzing 3,3',5,5'-tetramethylbenzidine (TMB) to produce TMB oxide (oxTMB) with a strong photothermal characteristic, combining with Ti₃C₂@Au@Pt to synergistically amplify the temperature signal. Moreover, numerous Ti₃C₂@Au@Pt nanocomposites would be selectively attained on the BC-CTCs surface through multi-aptamer recognition and binding strategy, which further enhanced the specificity and facilitated signal amplification. Therefore, direct separation and highly sensitive detection of BC-CTCs was successfully achieved in human blood samples. More significantly, the controlled release of the captured BC-CTCs without affecting cell viability could be straightforwardly realized by a simple strand displacement reaction. Thus, with the distinct features of portability, high sensitivity, and easy operation, the current method holds great promise for early diagnosis of breast cancer.

Functionalized polydopamine nanospheres as in situ spray for photothermal image-guided tumor precise surgical resection

Surgical resection is a critical procedure for treatment of solid tumor, which commonly suffers from postoperative local recurrence due to the possibility of positive surgical margin. Although the widely used clinical imaging techniques (CT, MRI, PET, etc.) show beneficial effects in providing a macroscopic view of preoperative tumor position, they are still failing to provide intraoperative real-time imaging navigation during the surgery and need oral or intravenous injection contrast agents with risk of adverse effects. In this work, we present a nano-spray assisted photothermal imaging system for in vitro cells discrimination as well as in vivo visualization of tumor position and border that guides real-time precise tumor resection during surgery (even for tiny tumor less than 3 mm). Herein, the nano-spray were prepared by RGD peptide functionalized polydopamine (PDA-RGD) nanospheres with excellent photothermal conversion efficiency (54.27%), stability and reversibility, which target ανβ3 integrin overexpressed tumor cells. Such PDA-RGD serve as nanothermometers that convert and amplify biological signal to intuitive thermal image signal, depicting the tumor margin in situ. In comparison to conventional imaging techniques, our approach through topical spraying together with portable infrared camera has the characteristics of low cost, convenient, no radiation hazard, real-time intraoperative imaging-guidance and avoiding the adverse effects risk of oral or intravenous contrast agent. This technology provides a new universal tool for potentially assisting surgeons' decision in real-time during surgery and aiding to improved outcome.

Mask assistance to colorimetric sniffers for detection of Covid-19 disease using exhaled breath metabolites

According to World Health Organization reports, large numbers of people around the globe have been infected or died for Covid-19 due to the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). Researchers are still trying to find a rapid and accurate diagnostic method for revealing infected people by low viral load with the overriding goal of effective diagnostic management. Monitoring the body metabolic changes is known as an effective and inexpensive approach for the evaluation of the infected people. Here, an optical sniffer is introduced to detect exhaled breath metabolites of patients with Covid-19 (60 samples), healthy humans (55 samples), and cured people (15 samples), providing a unique color pattern for differentiation between the studied samples. The sniffer device is installed on a thin face mask, and directly exposed to the exhaled breath stream. The interactions occurring between the volatile compounds and sensing components such as porphyrazines, modified organic dyes, porphyrins, inorganic complexes, and gold nanoparticles allowing for the change of the color, thus being tracked as the sensor responses. The assay accuracy for the differentiation between patient, healthy and cured samples is calculated to be in the range of 80%-84%. The changes in the color of the sensor have a linear correlation with the disease severity and viral load evaluated by rRT-PCR method. Interestingly, comorbidities such as kidney, lung, and diabetes diseases as well as being a smoker may be diagnosed by the proposed method. As a powerful detection device, the breath sniffer can replace the conventional rapid test kits for medical applications.

The advent of thermoplasmonic membrane distillation

Freshwater scarcity is a vital societal challenge related to climate change, population pressure, and agricultural and industrial demands. Therefore, sustainable desalination/purification of salty/contaminated water for human uses is particularly relevant. Membrane distillation is an emerging hybrid thermal-membrane technology with the potential to overcome the drawbacks of conventional desalination by a synergic exploitation of the water-energy nexus. Although membrane distillation is considered a green technology, efficient heat management remains a critical concern affecting the cost of the process and hindering its viability at large scale. A multidisciplinary approach that involves materials chemistry, physical chemistry, chemical engineering, and materials and polymer science is required to solve this problem. The combination of solar energy with membrane distillation is considered a potentially feasible low-cost approach for providing high-quality freshwater with a low carbon footprint. In particular, recent discoveries about efficient light-to-heat conversion in nanomaterials have opened unprecedented perspectives for the implementation of sunlight-based renewable energy in membrane distillation. The integration of nanofillers enabling photothermal effects into membranes has been demonstrated to be able to significantly enhance the energy efficiency without impacting on economic costs. Here, we provide a comprehensive overview on the state of the art, the opportunities, open challenges and pitfalls of the emerging field of solar-driven membrane distillation. We also assess the peculiar physicochemical properties and synthesis scalability of photothermal materials, as well as the strategies for their integration into polymeric nanocomposite membranes enabling efficient light-to-heat conversion and freshwater.

Impedimetric detection of 2,4,6-trinitrotoluene using surface-functionalized halloysite nanotubes

Herein, we report the application of amine-surface-functionalized halloysite nanotubes (HAs) as active materials for the quantitative detection of 2,4,6-trinitrotoluene (TNT). The findings indicated that HA could selectively capture TNT via a strong reaction between the amine groups on its surface and the TNT molecules. Plate electrodes were fabricated from HA to evaluate its TNT-sensing capacity by electrochemical impedance spectroscopy. Upon binding with TNT, the proton conductivity on the HA plate electrodes increased linearly with the TNT concentration from 1.0 × 10⁻¹¹ M to 1.0 × 10⁻⁴ M. The HA plate electrodes exhibited good sensitivity with a detection limit of 1.05 × 10⁻¹² M. Subsequently, the cycling measurements of the TNT binding/removal were performed on the HA plate electrode, and the material exhibited high stability, good regenerative ability, and good reversibility without a significant decrease in efficiency. The present work highlights the significant application potential of HAs for the electrochemical detection of TNT.

Amine-surface-functionalized halloysite nanotubes are used for electrochemical sensing TNT.

Paper-Based Probes with Visual Response to Vapors from Nitroaromatic Explosives: Polyfluorenes and Tertiary Amines

Although it is well-known that nitroaromatic compounds quench the fluorescence of different conjugated polymers and form colored Meisenheimer complexes with proper nucleophiles, the potential of paper as a substrate for those macromolecules can be further developed. This work undertakes this task, impregnating paper strips with a fluorene-phenylene copolymer with quaternary ammonium groups, a bisfluorene-based cationic polyelectrolyte, and poly(2-(dimethylamino)ethyl methacrylate) (polyDMAEMA). Cationic groups make the aforementioned polyfluorenes attachable to paper, whose surface possesses a slightly negative charge and avoid interference from cationic quenchers. While conjugated polymers had their fluorescence quenched with nitroaromatic vapors in a non-selective way, polyDMAEMA-coated papers had a visual response that was selective to 2,4,6-trinitrotoluene (TNT), and that could be easily identified, and even quantified, under natural light. Far from implying that polyfluorenes should be ruled out, it must be taken into account that TNT-filled mines emit vapors from 2,4-dinitrotoluene (DNT) and dinitrobenzene isomers, which are more volatile than TNT itself. Atmospheres with only 790 ppbv TNT or 277 ppbv DNT were enough to trigger a distinguishable response, although the requirement for certain exposure times is an important limitation.

Rapid photothermal detection of foodborne pathogens based on the aggregation of MPBA-AuNPs induced by MPBA using a thermometer as a readout

Rapid and portable detection of foodborne pathogens is of great significance for food safety and public health. The colorimetric methods based on naked-eye have been demonstrated to be a suitable qualitative method for point-of-care testing (POCT). However, analytical instruments like a microplate reader must be needed for the quantitative assay. To overcome its limitation, we herein report a novel photothermal method for foodborne pathogens based on the photothermal effect of aggregated mercaptophenylboronic acid-functionalized AuNPs (MPBA-AuNPs) induced by MPBA to translate the colorimetric detection into a simple temperature measurement using thermometers as the readout. The aggregated AuNPs show higher photothermal conversion efficiency than well-separated AuNPs under 660 nm laser irradiation. In the presence of bacteria, MPBA-AuNPs will attach to the surface of bacteria and keep separated from aggregation induced by excess MPBA, resulting in a lower temperature increase under 660 nm laser irradiation. Using E. coli O157:H7 as a model target, a good linear relationship is observed between temperature increase and bacteria concentration from 1.00 × 10⁵-1.00 × 10⁹ cfu mL^-1 (R² = 0.9877) with a detection limit of 1.97 × 10⁴ cfu mL^-1, which is three orders of magnitude lower than of the MPBA-AuNPs-based colorimetric assays. The proposed photothermal method provided a universal platform for rapid and portable detection of broad-spectrum bacteria strains in real samples.

Synthesis, characteristics, and applications of modified starch nanoparticles: A review

Nowadays, starch nanoparticles (SNPs) are drawing attention to the scientific community due to their versatility and wide range of applications. Although several works have extensively addressed the SNP production routes, not much is discussed about the SNPs modification techniques, as well as the use of modified SNPs in typical and unconventional applications. Here, we focused on the SNP modification strategies and characteristics and performance of the resulting products, as well as their practical applications, while pointing out the main limitations and recommendations. We aim to guide researchers by identifying the next steps in this emerging line of research. SNPs esterification and oxidation are preferred chemical modifications, which result in changes in the functional groups. Moreover, additional polymers are incorporated into the SNP surface through copolymer grafting. Physical modification of starch has demonstrated similar changes in the functional groups without the need for toxic chemicals. Modified SNPs rendered differentiated properties, such as size, shape, crystallinity, hydrophobicity, and Zeta-potential. For multiple applications, tailoring the aforementioned properties is key to the performance of nanoparticle-based systems. However, the number of studies focusing on emerging applications is fairly limited, while their applications as drug delivery systems lack in vivo studies. The main challenges and prospects were discussed.

Recent advances of environmental pollutants detection via paper-based sensing strategy

Paper has become one of the most promising substrates for building low-cost and powerful sensing platforms due to its self-pumping ability and compatibility with multiple patterning methods. Paper-based sensors have been greatly developed in the field of environmental monitoring. In this review, we introduced the research and application of paper-based sensors in environmental monitoring, focusing on the deposition and patterning methods of building paper-based sensors, and summarized the applications of detecting environmental pollutants, including metal ions, anions, explosives, neurotoxins, volatile organic compounds, and small molecules. In addition, the development prospects and challenges of promoting paper-based sensors are also discussed. The current review will provide references for the construction of portable paper-based sensors, and has implications for the field of on-site real-time detection of the environment.

Sensitive detection of 2,4,6-trinitrotoluene utilizing fluorescent sensor from carbon dots and reusable magnetic core-shell nanomaterial

Carbon dots have been a promising nano-carbon material with many advantages, and attracted many more attentions. This study designed a new chemosensor integrating the strong fluorescent property of carbon dots and the magnetism of amino-functionalized magnetic core-shell nanomaterial, Fe@SiO₂-NH₂ for determination of 2,4,6-trinitrotoluene (TNT). In this system, fluorescent carbon dots interacted with amino groups on the surface of amino-functionalized magnetic core-shell nanomaterial leading to fluorescence quenching of carbon dots, appearance of TNT competitively replaced of carbon dots on the surface of the magnetic material through forming a Meisenheimer complex. This sensor exhibits excellent selectivity and sensitivity for TNT, and which provided a good dynamic linear range for TNT from 10 to 2000 ng mL^-1. The experiments demonstrate a low detection limit of 2.15 ng mL^-1. The intra-day precisions for 25, 100 and 500 ng mL^-1 were 4.6, 2.3 and 0.5% (RSD, n = 6), inter-day precisions for 25, 100 and 500 ng mL^-1 were 4.2, 2.5 and 0.9% (RSD, n = 6), respectively. The developed sensor was validated with river water, dust, and soil samples, and the achieved spiked recoveries were immensely satisfied from 98.1% to 102.0%. The Fe@SiO₂-NH₂ possessed excellent reusability. This sensor exhibits that it is simple, sensitive and selective, and will be a vital analytical tool for TNT in many fields.

A Photoluminescent Cd(II) Coordination Polymer with Potential Active Sites Exhibiting Multiresponsive Fluorescence Sensing for Trace Amounts of NACs and Fe3+ and Al3+ Ions

The elaborately designed π-electron-rich fluorescent ligand 1,4-bis(1-carboxymethylene-4-imidazolyl)benzene (H₂L), possessing bifunctional groups including the carboxylate groups (building units) and 4-imidazoyl groups (N-donor potential active sites) has been employed to construct fluorescent coordination polymers. A luminescent sensor, namely [Cd(L)(phen)₂]·5H₂O (1), was obtained, which has a one-dimensional structure. The fluorescent material shows a blue emission maximum at 457 nm with a luminescence lifetime of 488 ns and a quantum yield (QY) of 4.56%. Significantly, 1 serves as a promising multiresponsive luminescent sensor to detect trace nitroaromatic compounds (NACs) with the limits of detection (LOD) of 7.21 × 10^-8, 1.85 × 10^-5, and 1.15 × 10^-5 mol/L for 2-nitrophenol (2-NP), 3-nitrophenol (3-NP), and 4-nitrophenol (4-NP), respectively. Furthermore, CP 1 exhibits fluorescent turn-off and turn-on sensing behavior for Fe³⁺ and Al³⁺ metal ions with trace amounts of 1.05 × 10^-7 and 1.13 × 10^-7 mol/L, respectively. Experimental methods and theoretical calculations were employed to elucidate the sensing mechanism in detail.

NIR-Driven Intracellular Photocatalytic O2 Evolution on Z-Scheme Ni3S2/Cu1.8S@HA for Hypoxic Tumor Therapy

Hypoxia in a tumor microenvironment (TME) has inhibited the photodynamic therapy (PDT) efficacy. Here, Ni₃S₂/Cu_1.8S nanoheterostructures were synthesized as a new photosensitizer, which also realizes the intracellular photocatalytic O₂ evolution to relieve hypoxia in TME and enhance PDT as well. With the narrow band gap (below 1.5 eV), the near infrared (NIR) (808 nm) can stimulate their separation of the electron-hole. The novel Z-scheme nanoheterostructures, testified by experimental data and density functional theory (DFT) calculation, possess a higher redox ability, endowing the photoexited holes with sufficient potential to oxide H₂O into O₂, directly. Meanwhile, the photostimulated electrons can capture the dissolved O₂ to form a toxic reactive oxygen species (ROS). Moreover, Ni₃S₂/Cu_1.8S nanocomposites also possess the catalase-/peroxidase-like activity to convert the endogenous H₂O₂ into ·OH and O₂, which not only cause chemodynamic therapy (CDT) but also alleviate hypoxia to assist the PDT as well. In addition, owing to the narrow band gap, they possess a high NIR harvest and great photothermal conversion efficiency (49.5%). It is noted that the nanocomposites also exhibit novel biodegradation and can be metabolized and eliminated via feces and urine within 2 weeks. The present single electrons in Ni/Cu ions induce the magnetic resonance imaging (MRI) ability for Ni₃S₂/Cu_1.8S. To make sure that the cancer cells were specifically targeted, hyaluronic acid (HA) was grafted outside and Ni₃S₂/Cu_1.8S@HA integrated photodynamic therapy (PDT), chemodynamic therapy (CDT), and photothermal therapy (PTT) to exhibit the great anticancer efficiency for hypoxic tumor elimination.

Current Advances in Black Phosphorus-Based Drug Delivery Systems for Cancer Therapy

Cancer has been one of the major threats to the lives of human beings for centuries. Traditional therapy is more or less faced with certain defects, such as poor targeting, easy degradation, high side effects, etc. Therefore, in order to improve the treatment efficiency of drugs, an intelligent drug delivery system (DDS) is considered as a promising solution strategy. Due to their special structure and large specific surface area, 2D materials are considered to be a good platform for drug delivery. Black phosphorus (BP), as a new star of the 2D family, is recommended to have the potential to construct DDS by virtue of its outstanding photothermal therapy (PTT), photodynamic therapy (PDT), and biodegradable properties. This tutorial review is intended to provide an introduction of the current advances in BP-based DDSs for cancer therapy, which covers topics from its construction, classified by the types of platforms, to the stimuli-responsive controlled drug release. Moreover, their cancer therapy applications including mono-, bi-, and multi-modal synergistic cancer therapy as well as the research of biocompatibility are also discussed. Finally, the current status and future prospects of BP-based DDSs for cancer therapy are summarized.

Multifunctional Flexible SERS Sensor on a Fixate Gel Pad: Capturing, Derivation, and Selective Picogram Indirect Detection of Explosive 2,2',4,4',6,6'-Hexanitrostilbene

2,2',4,4',6,6'-Hexanitrostilbene (HNS) is an explosive with better explosion performance than the well-known 2,4,6-trinitrotoluene (TNT). Surprisingly, unlike other nitroaromatic explosives, there are limited reports regarding the detection of the HNS, let alone sensing reports on surface residues. In this work, a multifunctional flexible SERS sensor was proposed for the indirect detection of HNS based on the transparent fixate gel pads. The sticky and flexible gel pad can effectively collect any HNS surface residues. The inherent amine groups within the gel pad of which the main ingredient is polyurethane can react with HNS to form the orange Meisenheimer-alike complex. The modification of Ag NPs with halide ions was screened for the best SERS performance. KI-modified-citrate-reduced Ag NPs showed selective but enormous SERS enhancement for the HNS derivative. The detection of HNS in the solution phase was explored, and a linear range of 0.01-25 ppm was achieved. The lowest detectable amount (LDA) of HNS was found to be 50 pg, making it one of the most sensitive methods in literature. It was successfully utilized for the HNS residues sensing on fingerprints and bags with LDAs of 5 and 200 ng, respectively. In addition, other explosives including TATB, LLM-105, RDX, HMX, FOX-7, and TNT were also examined to assess the selectivity of the fixate. It was found that the fixate showed excellent selectivity for HNS.

One-Step Instantaneous Detection of Multiple Military and Improvised Explosives Facilitated by Colorimetric Reagent Design

Although colorimetric detection based on reagents has been widely used in the fields of practical trace analysis, its versatility for detecting multitargets remains the most challenging problem. As a proof of concept, a general colorimetric reagent based on potassium isopropanol (C₃H₇KO) and dimethyl sulfoxide for one-step instantaneous detection and discrimination of typical military and improvised explosives was designed. Vivid colors from none to purple red, blue green, yellow green, and green were shown, respectively, when detecting 2,4,6-trinitrotoluene (TNT), 2,4-dinitrotoluene (DNT), elemental sulfur (S), and potassium permanganate (KMnO₄). The unique design including the specific nucleophilic addition reaction and the base-catalyzed oxidation-induced electron transfer ensures perfect selectivity even upon facing more than 20 interferents. It is further experimentally demonstrated that the confinement effect introduced by Tween-20 plays an essential role in enhancing the color signal on the surface and thus boosts the detection performance even with a mass as low as 1.45 ng. The applicability of this versatile colorimetric reagent was further verified by integrating the reagent onto paper strips for the in-field identification of TNT, DNT, S, and KMnO₄ with the help of a portable smartphone-based microscope apparatus, and a practical detection mass of 10.3 ng could be realized. We expect the present colorimetric reagent design strategy would pave a way for one-step instantaneous visual detection toward trace multianalytes.

Multifunctional Fe3O4@Au supraparticle as a promising thermal contrast for an ultrasensitive lateral flow immunoassay

An ultrasensitive lateral flow immunoassay (LFIA) strip has been developed based on a multifunctional photothermal contrast Fe₃O₄@Au supraparticle (Fe₃O₄@Au SP) for quantitative Ochratoxin A (OTA) detection. The Fe₃O₄@Au SP composite not only shows a better photothermal effect over Fe₃O₄ and gold nanoparticles, but possesses magnetic property and excellent ability to directly adsorb protein (antibody). Under 808 nm irradiation, photothermal images of the test strips are recorded by a portable Infrared thermal camera. A quantitative analysis is easily achieved based on the thermal changes, which are proportional to the concentrations of analytes. Under an optimal condition, a wide linear detection range from 1 pg mL⁻¹ to 1μgmL⁻¹ and a limit of detection (LOD) at 0.12 pg mL⁻¹ have been achieved with OTA as a model analytes. The practical application potential has also been validated by detection of OTA in spiked corn, peanut, and soybean extractives with overall recoveries ranging from 98.6% to 115% and coefficient of variations (CVs) between 6.06% and 12.73%. The photothermal LFIA renders a rapid, sensitive, and quantitative bio-/chemo-sensing platform with only a portable laser source and a thermal camera.

A Portable Smartphone Platform Using a Ratiometric Fluorescent Paper Strip for Visual Quantitative Sensing

Instrument-free, portable, and direct read-out mini-devices have wider application prospects in various fields, especially for real-time/on-site sensing. Herein, combined with a paper strip, a smartphone sensing platform integrated with a UV lamp and dark cavity by 3D-printing technology has been developed for the rapid, sensitive, instrument-free, and visual quantitative analysis in real-time/on-site conditions. The platform proved the feasibility for visual quantitative detection of pesticide via a fluorescence "on-off-on" response with a single dual-emissive ratiometric paper strip. Red-emitting CdTe quantum dots (rQDs) were embedded into the silica nanoparticles (SiO₂ NPs) as an internal reference, while blue-emitting carbon dots (bCDs) as a signal report unit were covalently linked to the outer surface of SiO₂ NPs. The blue fluorescence could be quenched by gold nanoparticles (Au NPs) and then recovered with pesticide. The red (R), green (G), and blue (B) channel values of the generated images were determined by a color recognizer application (APP) installed in the smartphone, and the R/B values could be used for pesticide quantification with a sensitive detection limit (LOD) of 59 nM. The smartphone sensing platform based on 3D printing might provide a general strategy for visual quantitative detection in a variety of fields including environments, diagnosis, and safety monitoring.

Photothermal enhancement in sensitivity of lateral flow assays for detection of E-coli O157:H7

Lateral flow immunoassay (LFA) is a well-known point-of-care technology for the detection of various analytes. However, low sensitivity and lack of quantitative results are some of its critical drawbacks. Here we report a photothermal enhanced lateral flow sensor on the basis of the photothermal properties of reduced graphene oxide (rGO) for the detection of E-coli O157:H7 as a model pathogen. The calibration curve of the photothermal method exhibited a linear range from 5 × 10⁵ to 5 × 10⁷ CFU/ml with a correlation coefficient of R² = 0.96 and a regression equation of y = 8.1x-43 for standard bacteria solutions in phosphate buffer. The limit of detection was ∼5 × 10⁵ CFU/ml for standard bacteria solutions, which was a 10-fold enhancement in sensitivity compared to the qualitative results. Specificity experiments showed that the photothermal method can only detect the target bacteria among 6 types of bacteria strains. It was confirmed that the developed technique could be a highly potential method for the rapid detection field because it can provide fast quantitative results with improved sensitivity.

Chemically modified mesoporous wood: a versatile sensor for visual colorimetric detection of trinitrotoluene in water, air, and soil by smartphone camera

There is great interest in detection of the level of 2,4,6-trinitrotoluene (TNT) explosive due to its importance in public security and environmental protection fields. The conventional chemical sensors do not simultaneously realize simple, rapid, sensitive, selective, and direct detection of TNT in different medium without sample pretreatment. Here we present a modified wood-based chemical sensor for visual colorimetric detection of TNT in water, air, and soil. The natural wood undergoes a delignified process, which is further functionalized by 3-aminopropyltriethoxysilane (APTES). When TNT solutions are introduced, the wood-based sensor shows a colorimetric transition from light yellow to brown for naked-eye readout because of the generation of Meisenheimer complex between APTES and TNT. The photographs are collected by smartphone camera, and the RGB components are extracted to calculate the adjusted intensity for qualitative detection of TNT. This visual colorimetric sensor for TNT solution displays a linearity in the range of 0.01-5 mM with a limit of detection of 3 μM. In addition, by taking advantage of its inherent mesostructure, the wood-based sensor can be employed for visual detection of TNT vapor as well. Furthermore, it is also able to directly detect TNT in wet soil samples based on capillary action, in which TNT carried by water transports upward along the wood microchannel, triggering the generation of Meisenheimer complex. Graphical Abstract.

Detection of Nitroaromatics by Pyrene-Labeled Starch Nanoparticles

Starch nanoparticles (SNPs) were hydrophobically modified by using 1-pyrenebutyric acid (PyBA) with degrees of substitution (DS) between 0.0006 and 0.11. Fluorescence quenching studies were conducted on the pyrene-labeled starch nanoparticles (Py-SNPs) in dimethyl sulfoxide (DMSO) and water with nitromethane (NM), 4-mononitrotoluene (MNT), 2,6-dinitrotoluene (DNT), and 2,4,6-trinitrotoluene (TNT) to assess the mode of quenching of the pyrene labels in the two solvents. In DMSO where pyrene, starch, and the quenchers were soluble, a decrease in fluorescence signal was the result of dynamic encounters between the excited pyrene labels and the nitrated quenchers. In water where starch could be dispersed but pyrene and the nitroaromatic compounds (NACs) were sparingly soluble, quenching took place through the binding of NACs to pyrene aggregates. Py(11)-SNPs (Py-SNPs with a DS of 0.11)-coated filter papers (Py-CFPs) were prepared as fluorescence sensors. The fluorescence emitted by Py-CFPs was quenched to 25% of its original value within 10 ± 2, 72 ± 20, and 23 ± 4 s upon exposure to vapors of MNT, DNT, and TNT, respectively. When known amounts of NACs were deposited onto Py-CFPs, their limit of detection (LOD) when the fluorescence decreased by more than 3 standard deviations (3σ) from its original value equaled 9.2 ± 0.8, 3.3 ± 0.5, and 0.20 ± 0.02 ng/mm² for MNT, DNT, and TNT, respectively. These response times and LODs were among the best values reported to date in the scientific literature for fluorescence sensors. The selectivity of the Py-CFPs toward NACs was also investigated by comparing their response to the presence of non-nitrated aromatics, amines, and aromatic ketones. Quenching was only observed with the latter family of chemicals tested, but with much lower efficiency compared to TNT, thus reflecting some level of selectivity toward this specific NAC.

ATMP-induced three-dimensional conductive polymer hydrogel scaffold for a novel enhanced solid-state electrochemiluminescence biosensor

Reliable and sensitive detection of xanthine has important medical and biological significance. In this work, a novel three-dimensional (3D) conductive polymer hydrogel of polyaniline (PAni) was feasibly prepared using aniline (Ani), amino trimethylene phosphonic acid (ATMP) and ammonium persulfate ((NH₄)₂S₂O₈) as monomer, gelatinizing agent and oxidizing agent, respectively. Protonation of aniline can be achieved by ATMP, inducing good conductivity of the obtained hydrogel. ATMP remained the chelating abilities in the conductive hydrogel, enabling further immobilization with silver nanoparticles (AgNPs) functionalized by a luminol derivative, N-(aminobutyl)-N-(ethylisoluminol) (ABEI). ABEI-Ag@PAni-ATMP exhibited an enhanced performance of solid-state electrochemiluminescence (ECL). Integrated with xanthine oxidase (XOD), the proposed biosensor can be applied in the detection of xanthine via in-situ generated hydrogen peroxide (H₂O₂), and present a low detection limit of 9.6 nM, a wide linear range (from 0.01 to 200 μM) and excellent stability.

Colorimetric paper sensor for sensitive detection of explosive nitroaromatics based on Au@Ag nanoparticles

Rapid, reliable, onsite approaches for detection trace level of trinitrotoluene (TNT) is a pressing necessity for both homeland security and environmental protection. To this end, hydrophilic amine(-NH₂) protected Au@Ag nanoparticles (NPs) were developed and fabricated as colorimetric paper sensor for delicate detection of TNT. The as-developed nanoprobe selectively reacts with TNT through classic Meisenheimer complex formation by means of charge transfer process from an electron-rich NH₂ group of β-cysteamine to an electron-deficient nitro group on TNT. Due to the absence of this particular interaction of other nitroaromatics, the proposed probe is highly selective for TNT detection with a better linear range (0-20 μg/mL) and limit of detection (LOD) of 0.35 μg/mL. The present work provides a novel and facile strategy to fabricate colorimetric paper sensors with rapid and selective recognition ability for label free analysis of TNT.

Mechanistic and thermodynamic aspects of a pyrene-based fluorescent probe to detect picric acid

Thermodynamic investigation of picric acid sensing using a pyrene-based fluorescent probe.

Embedding Nanocluster in MOF via Crystalline Ion-Triggered Growth Strategy for Improved Emission and Selective Sensing

Metal-organic frameworks (MOFs) containing metal nanoclusters (NCs) display great potentials, but the fabrication faces challenges because of the serious agglomeration of NCs during the MOF growth. We report a crystalline ion-triggered growth strategy for embedding AuNCs in ZIF-8. As control, when the encapsulation was triggered with other metal ions (e.g., Ca²⁺, Pb²⁺, Cd²⁺, Na⁺, Fe³⁺, Cu²⁺, and Ni²⁺), the AuNCs failed to be encapsulated. The quantum yields and lifetime of AuNCs were greatly enhanced after embedding in ZIF-8. The AuNCs@ZIF-8 were then successfully applied for the selective sensing of H₂S both in liquid and gas phases. This crystalline ion-triggered growth strategy was easily extended to other systems, such as AgNCs@ZIF-8 and AuNCs@ZIF-67, indicating the general adaptability of this design protocol.

Fluorometric detection of nitroaromatics by fluorescent lead complexes: A spectroscopic assessment of detection mechanism

Three Schiff base ligands such as 2‑[(2‑Hydroxy‑3‑methoxy‑benzylidene)‑amino]‑2‑hydroxymethyl‑propane‑1,3‑diol (HL1), 2‑[(2‑Hydroxy‑benzylidene)‑amino]‑2‑hydroxymethyl‑propane‑1,3‑diol (HL2), 2‑[(3,5‑Dichloro‑2‑hydroxy‑benzylidene)‑amino]‑2‑hydroxymethyl‑propane‑1,3‑diol (HL3) have been synthesized by condensation of aldehydes (such as 3,5‑Dichloro‑2‑hydroxy benzaldehyde, 2‑Hydroxy‑benzaldehyde, and 2‑Hydroxy‑3‑methoxy‑benzaldehyde) with Tris‑(hydroxymethyl)amino methane and characterized by IR, UV-vis and ¹H NMR spectroscopy. Then all these three ligands have been used to prepare Pb(II) complexes by reaction with lead(II) acetate tri-hydrate in methanol. In view of analytical and spectral (IR, UV-vis and Mass) studies, it has been concluded that, except HL2, other two ligands form 1:1 metal complexes (1 and 3) with lead. Between two complexes, complex 3 is highly fluorescent and this property has been used to identify the pollutant nitroaromatics. Finally, the quenching mechanism has been established by means of spectroscopic investigation.

Label-free fluorescence imaging of cytochrome c in living systems and anti-cancer drug screening with nitrogen doped carbon quantum dots

As an important biomarker for the early stage of apoptosis, cytochrome c (Cyt c) has been recognized as a key component of the intrinsic apoptotic pathway. Fluorescence imaging tools enabling detection of Cyt c in apoptotic signaling have been rarely explored, though they are critical for cell biology and clinical theranostics. Here, we designed a novel label-free N-doped carbon dot (N-doped CD)-based nanosensor that enables fluorescence activation imaging of Cyt c release in cell apoptosis. The inner filter effect of Cyt c towards N-doped CDs enabled quantitative Cyt c measurement. The nanosensor exhibited high sensitivity and selectivity, rapid response, good cell-membrane permeability and low cytotoxicity. All these features are favorable for in situ visualization of Cyt c for apoptosis research. Notably, the developed nanosensor was successfully applied to monitor intracellular release of Cyt c, and to visualize Cyt c in living zebrafish for the first time. Moreover, it also provided a viable platform for cell-based screening of apoptosis-inducing compounds. In virtue of these advantages and potential, the developed assay not only holds great significance for the better understanding of certain diseases at the cellular level, but also provides an invaluable platform for apoptotic studies and screening of anti-cancer drugs toward drug development.

Exploration of photothermal sensors based on photothermally responsive materials: a brief review

Photothermal sensors have emerged as a new type of sensor platform in recent decades and this brief review has summarized different types of photothermally responsive materials and their applications in various fields.

Ultrafast Paper Thermometers Based on a Green Sensing Ink

With the use of an ionic liquid as the ultrathermosensitive fluid, a paper thermometer is successfully developed with intrinsic ability of ultrafast response and high stability upon temperature change. The fluidic nature allows the ionic liquid to be easily deposited on paper by pen writing or inkjet printing, affording great promise for large-scale fabrication of low-cost paper sensors. Owing to the advantages of nonvolatilization, excellent continuity and deformability, the thermosensitive ink trapped within the cellulose fibers of paper matrix has no leakage or evaporation at open states, ensuring the excellent stability and repeatability of thermal sensing against arbitrary bending and folding operation. By shortening the heat exchange distance between ionic liquid and samples, it takes only 8 s for the thermometer to reach an electrical equilibrium at a given temperature. Moreover, the paper thermometer can be applied to remotely monitor temperature change with the combination of a wireless communication technology.

Facile synthesis of black phosphorus–Au nanocomposites for enhanced photothermal cancer therapy and surface-enhanced Raman scattering analysis

Black phosphorus nanosheets loaded with Au nanoparticles are suitable novel nanoagents for cancer photothermal therapy.

Rapid and Sensitive Detection of Cancer Cells Based on the Photothermal Effect of Graphene Functionalized Magnetic Microbeads

A strategy based on an immune-graphene oxide (GO)-magnetic microbead complex for the sensitive, rapid, portable, and low-cost detection of cancer cells was developed. The high-efficiency cell capture and high sensitive thermal contrast detection could be simultaneously achieved using magnetic microbeads and the photothermal effect of GOs. The temperature variation caused by irradiating the GOs with a laser was used to establish the standard curve of temperature variation and cancer cell number. Under optimal conditions, the limit of detection could reach 100 cells. 4T1 cells spiked in human blood could be successfully detected in 1.5 h, and the recovery was between 90.8% and 116.5%.

Permselectivity and thickness-dependent ion transport properties of overoxidized polyaniline: a mechanistic investigation

We report here the permselectivity of overoxidized polyaniline obtained using anodic polarization of polyaniline on glassy carbon electrodes. The contrasting redox behavior of overoxidized polyaniline coated electrodes towards [Fe(CN)₆]^3- and [Ru(NH₃)₆]³⁺ has been analyzed using cyclic voltammetry, hydrodynamic voltammetry and electrochemical impedance spectroscopy. This permselectivity vis a vis anion exclusivity arises from the incorporation of counter anions rather than by the formation of new functional groups in the polymer upon overoxidation - as inferred from FT Raman and UV-Visible spectral data. The surface charges of the polymeric films are also deduced from the zeta potential analysis. The thickness-dependent anion exclusion behavior of overoxidized polyaniline is quantitatively interpreted using diffusion coefficient measurements with rotating disc electrodes. The mechanism pertaining to the non-trivial role of film thickness in influencing anion exclusion is confirmed by additional impedance spectroscopy carried out during the overoxidation of polyaniline.