Efficient Ensemble System Based on the Copper Binding Motif for Highly Sensitive and Selective Detection of Cyanide Ions in 100% Aqueous Solutions by Fluorescent and Colorimetric Changes

A dual-signals fluorometric and colorimetric peptide-based probe for Cu(II) and glyphosate detection and its application for bioimaging and water testing

A novel dual-signal fluorometric and colorimetric probe FMDH (5-FAM-Met-Asp-His-NH2), incorporating a tripeptide (Met-Asp-His-NH2) linked to 5-carboxyfluorescein (5-FAM), was firstly synthesised. FMDH demonstrated exceptional selectivity and sensitivity, rapid response, wide pH response range and robust anti-interference capabilities for monitoring Cu2+. This was achieved through a distinctive naked-eye colorimetric and fluorescent quenching behaviour. A good linearity within the range of 0-3 μM (R2 = 0.9914) was attained, and the limit of detection (LOD) for Cu2+ was 47.4 nM. Furthermore, the FMDH-Cu2+ ensemble responded to glyphosate with notable selectivity and sensitivity. A good linear correlation (R2 = 0.9926) was observed at the lower concentration range (2.4-7.8 μM) and achieving a detection limit as low as 29.9 nM. The response time of FMDH with Cu2+ and glyphosate were less than 20 s, and the pH range of 7-11 that was suitable for practical application under physiological pH conditions. MTT assays confirmed that FMDH offers good permeability and low toxicity, facilitating successful application in imaging analysis of Cu2+ and glyphosate in living cells and zebrafish. In addition, FMDH was employed in the detection of these analytes in real water samples. Cost-effective, highly sensitive and easily prepared FMDH-impregnated test strips were developed for the efficient visual detection of Cu2+ and glyphosate under 365 nm UV light. Increasing concentrations of Cu2+ and glyphosate resulted in notable colour changes under 365 nm UV light, enabling visual semi-quantitative analysis via a smartphone colour-analysis App.

Rational design of peptide-based fluorescent probe for sequential recognitions of Cu(II) ions and glyphosate: Smartphone, test strip, real sample and living cells applications

A new peptide-based fluorescent probe named DMDH with easy-to-synthesize, excellent stability, good water solubility and large Stokes shift (225 nm) was synthesized for highly selective sequential detections of copper ions (Cu2+) and glyphosate (Glyp). DMDH demonstrated great detection performance towards Cu2+via strong fluorescence quenching, and forming non-fluorescence DMDH-Cu2+ ensemble. As a new promising cascade probe, the fluorescence of DMDH-Cu2+ ensemble was significantly recovered based on displacement approach after glyphosate was added. Interestingly, the limit of detections (LODs) for Cu2+ and glyphosate were 40.6 nM and 10.6 nM, respectively, which were far lower than those recommended by the WHO guidelines for drinking water. More importantly, DMDH was utilized to evaluate Cu2+ and glyphosate content in three real water samples, demonstrating that its effectiveness in water quality monitoring. Additionally, it is worth noting that DMDH was also applied to analyze Cu2+ and glyphosate in living cells in view of significant cells permeability and low cytotoxicity. Moreover, DMDH soaked in filter paper was used to create qualitative test strips and visually identify Cu2+ and glyphosate through significant color changes. Furthermore, smartphone RGB color recognition provided a new method for semi-quantitative testing of Cu2+ and glyphosate in the absence of expensive instruments.

Semi-quantitative and visual detection of Cu2+ and glyphosate in real samples and living cells using fluorescent and colorimetric dual-signals peptide-based probe

The excessive emission of copper ions (Cu2+) and the abuse of glyphosate (Glyp) have caused serious harm to the ecological environment and human health, so it is important to develop a fast and convenient method for the analysis of Cu2+ and glyphosate to ensure environmental and food safety. Herein, a dual-signals peptide-based probe (FASRH) with fluorescent and colorimetric was prepared using 5-carboxyl fluorescein modified tetrapeptide (Ala-Ser-Arg-His-NH2). FASRH was successfully used to recognize Cu2+ as a fluorescence "on-off" probe, forming the FASRH-Cu2+ complex with non-fluorescence. As a new promising cascade probe, FASRH-Cu2+ complex probe has high selectivity (only Glyp), good sensitivity (50.2 nM), good anti-interference ability and wide pH range (7.0-11.0) for the detection of glyphosate by ligand replacement method. In addition, the recognizable color changed markedly under 365 nm UV light and natural light. Notably, FASRH not only achieved accurate monitoring of Cu2+ and glyphosate in two real water samples, but also successfully applied to detect Cu2+ and glyphosate in live Hacat cells based on low cytotoxicity. Moreover, it is worth noting that FASRH-impregnated test strips exhibited significant fluorescence and colorimetric color changes for Cu2+ and glyphosate via naked eye. Furthermore, smartphone-assisted FASRH was used for the portable detection of Cu2+ and glyphosate based on the advantages of simplicity, low cost and fast response.

Ratiometric peptide-based fluorescent probe with large Stokes shift for detection of Hg2+ and S2- and its applications in cells imaging and smartphone-assisted recognition

In this work, a new ratiometric fluorescent probe DKA was synthesized based on the double sides of lysine backbone conjugated with alanine and dansyl groups. DKA exhibited fluorescence ratiometric response for Hg2+ with high sensitivity (13.4 nM), specific selectivity (only Hg2+), strong anti-interference ability (no interference), fast recognition (within 60 s) and wide pH range (5-10). The stoichiometry of binding of DKA and Hg2+ was determined to be 1:1 via Job's plot, ESI-HRMS and 1HNMR titration analysis. Subsequently, the in situ formation of DKA-Hg2+ complex was used for highly selective detection of S2- as a novel fluorescence "on-off" probe, and the lowest detection limit for S2- was 12.9 nM. In addition, DKA possessed excellent cells permeation and low toxicity, and fluorescence imaging of Hg2+ and S2- was performed in living Hacat cells. Most importantly, the digital imaging using a smartphone color recognition APP indicated that DKA could semi-quantitatively and visually detected Hg2+ and S2- without expensive equipment.

Small Molecule Optical Probes for Detection of H2S in Water Samples: A Review

Hydrogen sulfide (H2S) is closely linked to not only environmental hazards, but also it affects human health due to its toxic nature and the exposure risks associated with several occupational settings. Therefore, detection of this pollutant in water sources has garnered immense importance in the analytical research arena. Several research groups have devoted great efforts to explore the selective as well as sensitive methods to detect H2S concentrations in water. Recent studies describe different strategies for sensing this ubiquitous gas in real-life water samples. Though many of the designed and developed H2S detection approaches based on the use of organic small molecules facilitate qualitative/quantitative detection of the toxic contaminant in water, optical detection has been acknowledged as one of the best, attributed to the simple, highly sensitive, selective, and good repeatability features of the technique. Therefore, this review is an attempt to offer a general perspective of easy-to-use and fast response optical detection techniques for H2S, fluorimetry and colorimetry, over a wide variety of other instrumental platforms. The review affords a concise summary of the various design strategies adopted by various researchers in constructing small organic molecules as H2S sensors and offers insight into their mechanistic pathways. Moreover, it collates the salient aspects of optical detection techniques and highlights the future scope for prospective exploration in this field based on the limitations of the existing H2S probes.

Peptide-based probe for colorimetric and fluorescent detection of Cu2+ and S2- in environmental and biological systems

Pollution caused by Copper and hydrogen sulfide pollution has severe adverse effects on the environment and organisms. Real-time, fast and accurate monitoring of Cu2+ and S2- faces serious challenges. In this study, we designed a novel biosensor and synthesized it by mimicking the structure of the main Cu(II)-binding site on bovine serum albumin. As a peptide-based sensor, FGGH (FITC-Gly-Gly-His-NH2) can perform the sequential detection of Cu2+ and S2- by fluorescence and colorimetry. The high water solubility and selectivity make it suitable for monitoring Cu2+ and S2- in environmental water samples with high sensitivity; its limit of detection (LOD) is as low as 1.42 nM for Cu2+ and 22.2 nM for S2-. The paper-based sensing platform of this probe was found to be a promising tool for the on-site visualization of real-time quantitative analysis of Cu2+ and S2- due to its rapid response and recyclable detection characteristics. Additionally, FGGH was successfully used to image Cu2+ and S2- in living cells and zebrafish models with adequate fluorescence stability and low cytotoxicity, providing the first visual evidence of the effect of the interactions between Cu2+ and S2- on the redox homeostasis of organisms.

Rational development of a peptide-based probe for fluorescence and colorimetric dual-mode detection of Cu2+ and S2- ions: Real application in cell imaging and test strips

A new dual-mode probe FAM-SSH with fluorescence and colorimetric properties was developed by solid-phase peptide synthesis, comprising 5-carboxy fluorescein (5-FAM) as a fluorophore, and tripeptide (Ser-Ser-His) as a recognition group. FAM-SSH not only displayed highly selective detection of Cu2+ based on fluorescence quenching mode, but also achieved colorimetric recognition of Cu2+ in solution, wherein a color change was observable to the naked eye. Additionally, the FAM-SSH-Cu2+ ensemble was highly selective for S2- over a wide pH range (7.0-12.0), characterized by a fluorescence enhanced response and colorimetric recognition, which was caused by the release of FAM-SSH and the precipitation of CuS. Moreover, the limit of detection (LOD) values for Cu2+ and S2- were 55.5 nM and 31.1 nM, respectively. Results of sample analyses and cell imaging experiments indicated that FAM-SSH has exciting field practicability and good cell permeability, and would be further useful for detection and imaging in environmental systems and living cells. Finally, test strips were produced by immersing them in FAM-SSH solution, thereby creating a method for portable visual detection. More importantly, a smartphone-assisted visual sensing platform was also developed for semi-quantitative Cu2+ and S2- detection with LOD values of 0.48 μM and 1.22 μM, respectively.

A novel fluorescent probe based on a tripeptide-Cu(II) complex system for detection of histidine and its application on test strips and smartphone

Herein, we reported a novel peptide-based fluorescent probe DSSH for highly selective and sensitive detections of both Cu²⁺ and _l-histidine (_l-His). DSSH exhibited different color changes and fluorescence "on-off" response toward Cu²⁺ with a 2:1 binding stoichiometry, and the limit of detection (LOD) for Cu²⁺ was calculated to be 22.9 nM. The in situ formed DSSH-Cu²⁺ ensemble showed obvious fluorescence "off-on" response to _l-His based on replacement reaction with Cu²⁺, as well as the discernable color changes under 365 nm UV lamp irradiation with "naked eye". The specificity of Cu²⁺/_l-His interactions allowed _l-His to be determined without interference from other amino acids, and the detection limit of DSSH-Cu²⁺ ensemble response to _l-His was determined as 25.7 nM. Notably, DSSH was successfully applied for detecting Cu²⁺ and _l-His in RKO living cells owing to its remarkable fluorescence behavior and low cytotoxicity. Test strips experiments suggested that DSSH can recognize Cu²⁺ and _l-His together by a remarkable fluorescence change. More importantly, smartphone was combined with _l-His solutions of different concentrations and converted into digital values through RGB channels, which was successfully used for semi-quantitative identification of _l-His, and the limit of detection (LOD) was 0.97 μM.

Single Organic Ligands Act as a Bifunctional Sensor for Subsequent Detection of Metal and Cyanide Ions, a Statistical Approach toward Coordination and Sensitivity

The detection of key ions in environmental samples has garnered significant attention in recent years in the pursuit of a cleaner environment for living organisms. Bifunctional and multifunctional sensors, as opposed to single-species sensors, have emerged as a rapidly developing field. Many reports in the literature have documented the use of bifunctional sensors for the subsequent detection of metal and cyanide ions. These sensors, consisting of simple organic ligands, form coordination compounds with transition metal ions, resulting in clear visible or fluorescent changes that facilitate detection. In some cases, a single polymeric material can act as a ligand and coordinate with metal ions, forming a complex that serves as a sensor for cyanide ion detection in biological and environmental samples through various mechanisms. Nitrogen is the most dominant coordinating site in these bifunctional sensors, with the sensitivity of the sensors being directly proportional to the denticities of ligands for metal ions, while for cyanide ions the sensitivity was found independent of the denticity of the ligands. This review covers the progress made in the field over the past fifteen years (2007-2022), with most ligands detecting copper (II) and cyanide ions, but with the capability to detect other metals such as iron, mercury, and cobalt as well.

A novel peptide-based relay fluorescent probe with a large Stokes shift for detection of Hg2+ and S2- in 100 % aqueous medium and living cells: Visual detection via test strips and smartphone

Herein, a novel relay peptide-based fluorescent probe DGRK was synthesized via solid phase peptide synthesis (SPPS) technology. DGRK exhibited excellent water-solubility, good stability, remarkably large Stokes shift (230 nm) and high selectivity response to Hg²⁺ with a non-fluorescence complex DGRK-Hg²⁺ formation via a 1:1 binding mode. Further studies indicated that the DGRK-Hg²⁺ complex could act as a secondary probe for rapidly and sequentially detecting S^2- based on fluorescent "off-on" response, and without interference from a range of anions. The limit of detection (LOD) for Hg²⁺ and S^2- were calculated to be 33.6 nM and 60.9 nM, respectively. In addition, The reversibility of interaction of confirmed that the continuous and reversible recognition behavior of Hg²⁺ and S^2- by the probe DGRK, and could be cycled more than 5 times. In addition, DGRK could be successfully applied to the fluorescence imaging of Hg²⁺ and S^2- in two living cells based on excellent cells permeability and low cytotoxicity. Meanwhile, DGRK was successfully used to create the low-cost and portable test strips for visual detection and rapid analysis under 365 nm UV lamp, and the test strips combined with a smartphone (RGB color) was successfully applied to the semi-quantitative analysis and monitoring of dynamic changes of Hg²⁺ levels.

Progress in the Development of Biosensors Based on Peptide-Copper Coordination Interaction

Copper ions, as the active centers of natural enzymes, play an important role in many physiological processes. Copper ion-based catalysts which mimic the activity of enzymes have been widely used in the field of industrial catalysis and sensing devices. As an important class of small biological molecules, peptides have the advantages of easy synthesis, excellent biocompatibility, low toxicity, and good water solubility. The peptide-copper complexes exhibit the characteristics of low molecular weight, high tenability, and unique catalytic and photophysical properties. Biosensors with peptide-copper complexes as the signal probes have promising application prospects in environmental monitoring and biomedical analysis and diagnosis. In this review, we discussed the design and application of fluorescent, colorimetric and electrochemical biosensors based on the peptide-copper coordination interaction.

A dual-function luminescent probe for copper(II) ions and pH detection based on ruthenium(II) complex

A new ruthenium complex-based luminescent probe Ru-impa for Cu²⁺ and pH detection has been synthesized and characterized. Ru-impa could rapidly and selectively detect Cu²⁺ in aqueous solutions and the working pH ranges from weakly acidic to alkaline. The detection limit calculated using the S/N and S/B ratio was 24.7 nM and 3.4 μM, respectively. The test strips for practical detecting application were also prepared and the actual detection limit in drinking water was found to be 3 μM, which is lower than the WHO-guided drinking water limit (30 µM) and the upper limit of human serum free copper content (1.7-3.9 μM). Luminescence imaging study showed that Ru-impa could monitor Cu²⁺ level fluctuation in the cells. In addition, Ru-impa also shows a sensitive on-off luminescence response when pH > 10, indicating that it can also be used as a pH sensor under extremely alkaline conditions.

Peptide-based colorimetric and fluorescent dual-functional probe for sequential detection of copper(Ⅱ) and cyanide ions and its application in real water samples, test strips and living cells

A novel dual-functional peptide probe FLH based on fluorescent "on-off-on" strategy and colorimetric visualization method was designed and synthesized. This new probe exhibited highly selective and rapid detection of Cu²⁺ with significant fluorescent "turn-off" response, with a visible colorimetric change from yellow to orange. The combination ratio of FLH to Cu²⁺ (1:1) was determined using ESI-HRMS spectra and Job's plot. The fluorescent emission showed a good linear response (R² = 0.9986) with a low detection limit of 1.5 nM. In addition, the FLH-Cu²⁺ complex displayed colorimetric changes and a fluorescent "off-on" response toward CN^- over a wide pH range from 7 to 12. This detection behavior was observed within 20 s, with a limit of detection (LOD) for CN^- at 12.7 nM. Based on stability and accuracy, FLH was next developed as dual-functional test strips, and was also successfully applied to detect Cu²⁺ and CN^- in two actual water samples. More importantly, the cytotoxicity studies indicated that FLH had good biocompatibility and low toxicity, and was successfully utilized for monitoring Cu²⁺ and CN^- in living cells through fluorescence imaging.

Recent Development in Coordination Compounds as a Sensor for Cyanide Ions in Biological and Environmental Segments

Rapid detection of toxic ions has taken great attention in the last few decades due to its importance in maintaining a greener environment for human beings. The extreme toxicity of cyanide (CN-) ions is a great environmental concern as its continued industrial use generates interest in facile and sensitive methods for CN- ions detection. Since CN- ions act as a ligand in coordination chemistry which rapidly coordinates with suitable metals and forms complexes, this ability was mainly explored in its detection. It also attacks the central metal in coordination compounds and gives a fluorimetric response. Coordination compounds behave as a sensor for the detection of important ions like CN- ions and have gained great attention due to their facile synthesis, multianalyte detection, clear detection and low detection limit. Recently, considerable efforts have been devoted to the detection and quantification of hazardous multianalyte using a single probe. Cu2+ complexes are the main complexes used for CN- ions detection; however, the complexes of many other metals are also used as sensors. Four basic types of interaction have been discussed in coordination compound sensors for CN- detection. The performances of different sensors are compared with one another and the sensors which have the lowest detection limit are highlighted. This review comprises the progress made by coordination compounds as sensors for the detection of CN- ions in the last six years (2015-2021). To the best of our knowledge, there is no review on coordination compounds as a sensor for CN- ions during this period. [Figure: see text].

Selective cyanide sensing using a Fe(III) complex of pyridoxal-beta alanine Schiff base

Fluorogenic chemosensors using pyridoxal derivatized ligands as fluorophore is a rapidly growing field of research. Here we report a new Fe(III) complex, [Fe(HBala-pydx)(Bala-pydx)] (H₂Bala-pydx is the Schiff base of pyridoxal with beta-alanine), which can serve as a sensitive and selective turn-on fluorescent sensor for the detection of cyanide(CN^-) in micromolar concentrations (L.O.D. is 1.134 µM), via the ligand displacement approach, in aqueous-acetonitrile medium. The Fe(III) complex is adequately characterized by analytical and spectroscopic methods along with X-ray crystal structure determination.

A novel Near-Infrared fluorescent probe for Zn2+ and CN- double detection based on dicyanoisfluorone derivatives with highly sensitive and selective, and its application in Bioimaging

We have successfully synthesized NIRF as a near-infrared fluorescence probe for relay recognition of zinc and cyanide ions. The probe possesses well selectivity and anti-interference ability over common ions towards Zn²⁺ and CN^-. The results showed that Zn²⁺ and the probe formed [NIRF-Zn²⁺] complex after added Zn²⁺ into the probe NIRF solution, which emited red fluorescence. The probe can be used for quantitative detection of Zn²⁺ with a detection limit of 4.61 × 10^-8 M. It was determined that the binding stoichiometry between the NIRF and Zn²⁺ was 1:1 according to the job^,s curve. Subsequently, CN^- was added to the NIRF-Zn²⁺ solution, CN^- combined with Zn²⁺ to generate [Zn(CN^-)_x]^1-x due to the stronger binding ability between zinc ion and cyanogen, which lead to the red fluorescence disappeared. The quantitative detection of CN^- was realized with a detection limit of 7.9 × 10^*7 M. In addition, the probe has excellent specificity and selectivity for Zn²⁺ and CN^-. And the probe can be stable in a wide range of pH. Through biological experiments, we found that it can complete cell imaging in macrophages and imaging of living mice, which has application prospects in Bioimaging. In addition, the probe NIRF has good applicability for Zn²⁺ and CN^- detection in actual samples.

A novel peptide-based fluorescent probe with a large stokes shift for rapid and sequential detection of Cu2+ and CN- in aqueous systems and live cells

A novel fluorescent probe (DSD) was reasonably designed and synthesized with dansyl-labeled dipeptide (Dan-Ser-Asp-NH₂). DSD featured remarkably large Stokes shift (230 nm) and perfect water solubility, and exhibited high selectivity and rapid recognition toward Cu²⁺via fluorescence quenching. The detection limit of DSD for Cu²⁺ was 2.4 nM, indicated that DSD has excellent sensitivity. In addition, the stoichiometry between DSD and Cu²⁺ were detected as 1:1 by fluorescence titration, Job's plot and ESI-HRMS data. As designed, DSD-Cu²⁺ system was able to sequentially detect CN^- according to the displacement approach with fluorescence "off-on" response, and the detection limit for CN^- was calculated to be 41.9 nM. Specifically, the response time of DSD with Cu²⁺ and CN^- was less than 40 s, which rendered it suitable for real time detection in actual water samples. In addition, with the alternate addition of Cu²⁺ and CN^-, the reversible cycles could be repeated for at least 10 times, indicated that DSD was a promising reversibility probe. DSD showed low toxicity and good biocompatibility, and was successfully applied to detect Cu²⁺ and CN^- in living cells.

Advances in electrospun nanofibrous membrane sensors for ion detection

Harmful metal ions and toxic anions produced in industrial processes cause serious damage to the environment and human health.

An “On-Off-On” fluorescent peptide probe for the specific detection of Cu2+ and S2- in living cells and zebrafish

Cu2+ plays an important role as the third of most abundant essential trace elements in normal physiological activities and metabolism of the organism. S2- participates in a variety of physiological...

Fluorescent Sensor for Copper(II) and Cyanide Ions via the Complexation-Decomplexation Mechanism with Di(bissulfonamido)spirobifluorene

A novel spirobifluorene derivative bearing two bissulfonamido groups is successfully synthesized by Sonogashira coupling. This compound exhibits a strong fluorescence quenching by Cu(II) ion in a 50% mixture between acetonitrile and 20 mM pH 7.0 N-(2-hydroxyethyl)piperazine-N'-ethanesulfonic acid (HEPES) buffer with a detection limit of 98.2 nM. However, this sensor also shows ratiometric signal shifts from blue to yellow in the presence of Zn(II), Pb(II), and Hg(II) ions. The static quenching mechanism is verified by the signal reversibility using ethylenediaminetetraacetic acid (EDTA) and the Stern-Volmer plots at varying temperatures. The Cu(II)-spirobifluorene complex shows a highly selective fluorescence enhancement upon the addition of CN- ion with the detection limit of 390 nM. The application of this complex for quantitative analysis of spiked CN- ion in real water samples resulted in good recoveries.

Controllable and reversible sensing cyanide ion using dual-functional Cu(II)-based ensemble

In this work, a dual-functional Cu²⁺-based ensemble (2S·Cu²⁺) was well designed and characterized. Then, the successional and discriminating sensing for CN^- over other competitive species (H₂PO₄^- and biothiols) was achieved based on the disaggregation of 2S·Cu²⁺ ensemble and the deprotonation of imidazole NH of regenerated sensor S in aqueous solution, respectively. The visual sensing mechanism could be clearly demonstrated by ¹H NMR, HRMS and energy changes between the HOMO-LUMO band gaps. Furthermore, the reversibility and reusability of S and 2S·Cu²⁺ upon alternating addition of CN^-/H⁺ and CN^-/Cu²⁺ were studied. Interestingly, the sequential sensing for biothiols (cysteine, glutathione and homocysteine) and CN^- was also realized through spectroscopic methodology and test paper strips. This work may provide a feasible strategy to discriminate CN^- over H₂PO₄^- and biothiols with high selectivity and sensitivity through Cu²⁺-based ensembles.

A dual-functional colorimetric and fluorescent peptide-based probe for sequential detection of Cu2+ and S2- in 100% aqueous buffered solutions and living cells

Highly sensitive and selectivite detection of copper ions (Cu²⁺) and hydrogen sulfide (H₂S) have become important research topics due to the potential harmful impacts of these chemicals to human health and the environment. In this study, we report the synthesis of a dual-functional peptide-based probe L (FITC-AhxSerSerHis), designed to mimic a copper-sulfur metalloprotein, and capable of continuous detection of Cu²⁺ and S^2- based on colorimetric and fluorescent methods. The new probe L displayed excellent "turn off" fluorescence response and good selectivity for Cu²⁺ ions via a modification of the tripeptide and fluorescein isothiocyanate group, and produced an obvious color change visible to the naked eye. Furthermore, as an excitable probe, the L-Cu complex could continuously detect S^2- with high selectivity and sensitivity in 100% aqueous buffered solutions. The detection limits for fluorescence titration measurements, calculated using the equation 3σ/k, were 76.7 nM (Cu²⁺) and 27.2 nM (S^2-), which were well below U.S. EPA safety levels. In addition, L could be cycled to alternately detect Cu²⁺ and S^2-, thereby making it a promising reversible probe. Moreover, L was successfully applied to monitoring Cu²⁺ and S^2- in live RKO cells through fluorescence imaging, exhibiting low cytotoxicity and good cell permeability.

Rational Design of an ICT-Based Chemodosimeter with Aggregation-Induced Emission for Colorimetric and Ratiometric Fluorescent Detection of Cyanide in a Wide pH Range

An alkoxy-substituted 1,3-indanedione-based chemodosimeter 1 with an aggregation-induced emission (AIE) characteristic was rationally designed and synthesized for the ultrasensitive and selective sensing of cyanide in a wide pH range of 3.0-12.0. The nucleophilic addition of cyanide to the β-conjugated carbon of the 1,3-indanedione group obstructs intramolecular charge transfer (ICT) and causes a significant change in the absorption and fluorescence spectra, enabling colorimetric and ratiometric fluorescent detection of cyanide in a 90% aqueous solution. The cyanide-sensing mechanism is supported by single-crystal X-ray diffraction analysis, time-dependent density functional theory (TD-DFT) calculations, and ¹H NMR titration experiments. Sensor 1 exhibits strong yellow fluorescence in the solid state due to the AIE effect, and the paper probes containing 1 can be conveniently used to sense cyanide by the naked eye. Furthermore, chemodosimeter 1 was successfully used for sensing cyanide in real environmental water samples.

Aggregation-induced emission enhancement (AIEE)-active tetraphenylethene (TPE)-based chemosensor for CN. SPECTROCHIMICA ACTA. PART A, MOLECULAR AND BIOMOLECULAR SPECTROSCOPY 2021;245:118928. [PMID: 32950857 DOI: 10.1016/j.saa.2020.118928]

An aggregation-induced emission enhancement (AIEE)-active fluorescent sensor has been successfully designed and synthesized, combining the AIE effect of tetraphenylethylene (TPE) with the cyanide acceptor of phenanthro[9,10-d]imidazole. The sensor exhibits not only the property of AIEE in DCM/n-hexane or THF/H₂O, but also the phenomenon of mechanofluorochromic (MFC). It displays large Stokes shift (107 nm) due to the intramolecular charge transfer (ICT) process. The cation of CN^- boosts the ICT process to make the greater Stokes shift (184 nm) with the fluorescent color vary from blue-green to sodium-yellow and visually turning from light yellow to dark yellow in the naked eyes. The results of Job's plot, ESI-MS and the DFT calculations provide the stoichiometric ratio and electronic properties of the sensor. Furthermore, the sensor could be applied to qualitative and quantitative detection of CN^- on test paper strips.

A novel peptide-based fluorescent probe for sensitive detection of zinc (II) and its applicability in live cell imaging

In this work, we report SPSS synthesis of a new peptide-based fluorescent probe (L) capable of detecting Zn²⁺ with little interference in 100% aqueous solutions at physiological pH. Furthermore, L showed excellent sensitivity, with a detection limit of 26.77 nM. The 2:1 binding ratio between L and Zn²⁺ was determined using fluorometric titration, Job's plot and ESI-MS analyses. The "off-on-off" type fluorescence change of L was demonstrated by alternately adding Zn²⁺ and EDTA based on a formation-separation process of the complex, indicating that L could serve as a reversible probe. Moreover, MTT studies demonstrated that L has low biotoxicity, and could be successfully used for detection of Zn²⁺ and EDTA in live cells.

Rationally designed imidazole derivative as colorimetric and fluorometric sensor for selective, qualitative and quantitative cyanide ion detection in real time samples

A new imidazole derivative of 1,2-diaminoanthraquinone and fluorene-2-carboxaldehyde was designed as a sensor B2 to selectively detect the cyanide (CN^-) ion through colorimetric and/or fluorometric methods. The photochemical characterizations of sensor B2 were tested using absorption and emission spectral studies in CH₃CN-H₂O (8:2) semi-aqueous medium. An excited state proton transfer process (ESIPT) was proved by theoretical and spectral studies. The colorimetric and fluorescence detection limit of CN^- ion was found to be 5.3 × 10^-6 M and 4.11 × 10^-8 M, respectively. ¹H NMR titration, electrochemical and DFT studies were supported the removal of -NH proton from B2. In order to utilize this sensor in real-time applications, we developed a test cassette which is coated with sensor B2 detected the presence of CN^- ion in the food sample with endogenous cyanide ion.

Highly sensitive turn-on detection of mercury(II) in aqueous solutions and live cells with a chemosensor based on tyrosine

Herein, we reported a novel fluorescent chemosensor (DY) based on dansyl group and tyrosine by solid phase peptide synthesis (SPPS) for the detection of mercury(II) ions with excellent selectivity among 17 different metal ions. As designed, DY exhibited a sensitive fluorescence "turn-on" response to Hg²⁺ with low detection limits of 22.65 nM. A stoichiometric ratio (2: 1) of chemosensor DY and Hg²⁺ ions was determined by a Job's plot, fluorescent titration and the ESI-MS spectra. Especially, the reversible of DY-Hg with EDTA establishes the reuse of DY, and the circulation effect was very good. Furthermore, the wide pH range of 6-10 makes it capable of application in biological systems. Moreover, DY has been successfully applied to the detection of Hg²⁺ ions and EDTA in living HeLa and HK2 cells based on low cytotoxicity and good membrane permeability.

A simple pyrimidine based colorimetric and fluorescent chemosensor for sequential detection of copper (II) and cyanide ions and its application in real samples

In this study, a new pyrimidine-based chemosensor (PyrCS) has been developed for sequential detection of copper (II) and cyanide ions. The PyrCS has revealed high sensitivity and selectivity toward copper ion over other metal ions in aqueous media. The PyrCS as an optical probe exhibited a distinct color change and a bathochromic shift in UV spectra in the presence of copper ion in a few seconds due to the formation of stable complex (PyrCS-Cu²⁺). The results confirmed that the PyrCS has a widely linear detection range of 0.3-30 μM toward Cu²⁺. The calculated limit of detection for Cu²⁺ ions was low as 0.116 μM. Moreover, the fluorescent intensity of PyrCS at 507 nm was significantly quenched in the presence of Cu²⁺ and Fe²⁺ ions. Additionally, complex PyrCS-Cu²⁺ was successfully used to detect cyanide ions via Cu²⁺ displacement approach. The free PyrCS was recovered after adding the CN‾ ions in a few seconds due to the formation of the stable copper cyanide complex Cu(CN)_x. The calculated LOD for CN‾ ions was low as 0.320 μM. The data also clarified that the other competing anions did not create a clear color change in solutions. Since the proposed method could provide a vivid colorimetric response in the presence of detected analytes within the pH range of 3-9, we can claim that the developed chemosensor can be utilized in any physical and biological conditions.

A novel fluorescent chemosensor for detection of mercury(II) ions based on dansyl-peptide and its application in real water samples and living LNcap cells

Mercury is one of the most hazardous pollutants, and mercury pollution is a serious hazard to our environment. Herein, we designed and synthesized a new peptide-based fluorescent chemosensor (L) based on a Fmoc-Lys (Fmoc)-OH backbone conjugated with two Serines and dansyl groups using solid phase peptide synthesis (SPPS) technology. L exhibited highly selective and excellent sensitive detection of Hg²⁺ ions in 100% aqueous solutions through fluorescence quenching. The chemosensor L forms a 2:1 stoichiometry with high binding constants (4.89×10⁶M^-1) and the detection limit for Hg²⁺ ions of the proposed assay was 7.59nM. In addition, the recovery test results of Hg²⁺ concentration in actual water samples showed that the quantitative detection of Hg²⁺ ions can be realized in two water samples. Moreover, L showed low cytotoxicity and excellent membrane permeability in HK2 cells, which has been successfully applied for monitoring Hg²⁺ ions in living LNCaP cells.

A water-soluble peptide fluorescent chemosensor for detection of cadmium (II) and copper (II) by two different response modes and its application in living LNcap cells

A novel peptide-based fluorescent chemosensor (DGC) based on dansyl-appended dipeptide (Gly-Cys-NH₂) was synthesized using SPPS technology. DGC exhibited highly sensitive detection of Cadmium (II) ions in 100% aqueous solutions through fluorescent "turn on" response and the detection limits of 14.5 nM. On the other hand, the fluorescence of DGC was almost completely quenched with fast response time when the addition of Cu²⁺ ions to DGC solutions, the detection limits for Cu²⁺ was 26.3 nM. In addition, the 2:1 binding stoichiometry of DGC with Cd²⁺ and Cu²⁺ were confirmed by Job's plot, fluorescent titration and HR-MS data. More importantly, MTT assays and fluorescence imaging experiments suggested that DGC has outstanding membrane permeability and hypotoxicity, and could be an efficient fluorescent chemosensor for Cd²⁺ and Cu²⁺ detection by two different response modes in living LNcap cells.

Post-synthetic modification of a metal–organic framework with a chemodosimeter for the rapid detection of lethal cyanide via dual emission

A post-synthetically modified chemodosimeter grafted MOF is presented for the selective, visual and fluorogenic detection of cyanide via dual emission.

A terbium(iii) luminescent ATCUN-based peptide sensor for selective and reversible detection of copper(ii) in biological media

Detection of copper(ii) in biological media via time-delayed luminescence by a selective and reversible terbium(iii)-luminescent peptide sensor with pM affinity.

Copper Complex-Embedded Vesicular Receptor for Selective Detection of Cyanide Ion and Colorimetric Monitoring of Enzymatic Reaction

Detection of environmentally important ion cyanide (CN^-) has been done by a new method involving displacement of both metal and indicator, metal indicator displacement approach (MIDA) on the vesicular interface. Terpyridine unit was selected as the binding site for metal (Cu²⁺), whereas Eosin-Y (EY) was preferred as an indicator. About 150 nm sized nanoscale vesicular ensemble (Lip-1.Cu) has shown good selectivity and sensitivity for CN^- without any interference from other biologically and environmentally important anions. Otherwise, copper complexes are known for the interferences of binding with phosphates and amino acids. The Lip-1.Cu nanoreceptor also has the possibility to be used for real-time colorimetric scanning for the released HCN via enzymatic reactions. Lip-1.Cu has several superiorities over the other reported sensor systems. It has worked in 100% aqueous environment, fast response time with colorimetric monitoring of enzymatic reaction, and low detection limit.