Tailoring Catalytic Activity of Pt Nanoparticles Encapsulated Inside Dendrimers by Tuning Nanoparticle Sizes with Subnanometer Accuracy for Sensitive Chemiluminescence-Based Analyses

Potential-resolved ratiometric electrochemiluminescence detection for prostate-specific antigen based on CdS nanocrystals modified on carbon nanotubes and luminol functionalized nanocomposites

A ratiometric electrochemiluminescence (ECL) aptamer-based sensing platform was fabricated for prostate-specific antigen (PSA) determination. Activated CdS nanocrystals/multi-walled carbon nanotubes (CdS/MCNTs) and luminol-Pt/PAMAM nanocomposites (L-Pt/PAMAM NCs) were synthesized and used as cathodic and anodic ECL emitters, respectively. Amino group-modified aptamers were assembled on carboxylated magnetic beads, followed by hybridization with probe DNA functionalized L-Pt/PAMAM NCs. In the presence of PSA, the aptamer would bind specifically to the target PSA, thereby releasing L-Pt/PAMAM NCs. After magnetic separation, the separated L-Pt/PAMAM NCs would hybridize with capture DNA on CdS/MCNTs coated on glassy carbon electrode. This binding would lead to a decrease in cathodic ECL signal of CdS/MCNTs, due to the efficient energy transfer from CdS/MCNTs to L-Pt/PAMAM NCs. Meanwhile, L-Pt/PAMAM brought the anodic ECL signal from luminol. With the increase of PSA concentration, the ECL emission from luminol increased and the ECL emission from CdS/MCNTs decreased. The ratio of ECL intensity of luminol at 0.55 V and CdS/MCNTs at - 1.25 V could be used to quantify the concentration of PSA. This method enables sensitive and reliable detection of PSA over a wide range from 0.05 to 200 ng mL-1, and the detection limit is 0.02 ng mL-1.

Layer Growth Inhibiting Strategy for Superior-Loading Atomic Metal Sites on Ultrathin Layered Double Hydroxides as the Efficient Chemiluminescence Probes

Owing to the remarkable catalytic attributes, single-atom catalysts (SACs) have exhibited promising application prospects as the substitutes of natural enzymes. However, the low loading amount of atomic sites on typical SACs (no more than 5 wt %) significantly restricts their increased capability. Hereby, a layer growth inhibitor protocol was attempted to optimize anchoring isolated Co atoms efficiently on ultrathin monolayer layered double hydroxides (LDHs). Superior to the conventional multiple-layer LDHs, the synthesized monolayer LDHs (7.29 nm-thick) served as the emerging support for dispersing substantial active sites and featured a dramatic loading content of 32.5 wt %. Through X-ray absorption spectroscopy, the atomically dispersed active centers on Co SACs were verified as Co-N4 moieties. The results of radical scavenger experiments and electron paramagnetic resonance spectroscopy showed that Co SACs were favorable to the high yield of reactive oxygen species originating from the decomposition of H2O2. Therefore, Co SACs functioned as a sensitive enhancer to drastically boost the luminol-H2O2 chemiluminescence intensity by ∼4713-fold, which excelled drastically over these previously reported SACs. Furthermore, Co SACs were adopted as chemiluminescent probes for the quantitation of chlorothalonil, wherein a low detection limit of 49 pg mL-1 (3σ) was achieved. Additionally, the successful application in recovery trials demonstrated the favorable feasibility of Co SACs. The facile layer growth inhibitor protocol affords SACs with improved loading properties and even superior catalytic performances for sensitive luminescent bioassays.

Galvanic Bipolar Electrode Arrays with Self-Driven Optical Readouts

In this work, we report a bipolar electrode (BPE) array system with self-driven optical readouts of the faradic current flowing through the BPEs. The BPE array system is based on the spontaneous redox reactions that are respectively occurring at opposite poles of the BPEs with appropriate electrocatalysts on the poles; this system is analogous to one consisting of galvanic electrochemical cells. The galvanic BPE array system operates in a self-powered mode that requires there to be neither a direct electrical connection nor external electrical polarization to each BPE. Importantly, the appropriate electrocatalysts on the poles play a critical role in the galvanic BPE array system to induce the spontaneous redox reactions occurring at the poles of BPEs. Moreover, the galvanic BPE array system provides self-driven optical readouts, including fluorometric and colorimetric ones, to report the faradaic current resulting from the spontaneous redox reactions on the BPE poles. Based on the unique benefits that the galvanic BPE array system has over conventional BPEs, we demonstrated the promising potential of galvanic BPE arrays for the simple yet rapid and quantitative screening of electrocatalysts for the oxygen reduction reaction as well as sensitive sensing of H2O2 in parallel.

Turn-On Fluorescence Sensing of Oxygen with Dendrimer-Encapsulated Platinum Nanoparticles as Tunable Oxidase Mimics for Spatially Resolved Measurement of Oxygen Gradient in a Human Gut-on-a-Chip

Turn-on type fluorescence sensing of O₂ is considered a promising approach to developing ways to measure O₂ in microenvironments with spatially distributed O₂ levels. As a class of nanomaterials with a high degree of control over composition and structure, dendrimer-encapsulated nanoparticles (DENs) are promising candidates to mimic biological enzymes. Here, we report a strategy to monitor spatially distributed O₂ across a three-dimensional (3D) human intestinal epithelial layer in a gut-on-a-chip in a turn-on fluorescence sensing manner. The strategy is based on the oxidase-mimetic activity of Pt DENs for catalytic oxidation of nonfluorescent Amplex Red to highly fluorescent resorufin in the presence of O₂. We synthesized Pt DENs using two different types of dendrimers (i.e., amine-terminated or hydroxyl-terminated generation 6 polyamidoamine (PAMAM) dendrimers) with six different Pt²⁺/dendrimer ratios (i.e., 55, 200, 220, 550, 880, and 1320). After clarifying the intrinsic oxidase-mimetic activity of Pt DENs, we determined tunable oxidase-mimetic activity of Pt DENs, especially with fine-tuning the ratios of the Pt precursor ions and dendrimers. Particularly, the optimal Pt DENs having a Pt²⁺/dendrimer ratio of 1320 exhibited an ∼117-fold increase in the oxidase-mimetic activity for catalyzing the aerobic oxidation of Amplex Red to resorufin compared to one having a Pt²⁺/dendrimer ratio of 200. This study exemplified a simple yet effective approach for spatially resolved imaging of O₂ using metal nanoparticle-based oxidase mimics in microphysiological environments like a human gut-on-a-chip.

A metastasis suppressor Pt-dendrimer nanozyme for the alleviation of glioblastoma

Nanozymes are nanostructure-based materials which mimic the enzymatic characteristics of natural enzymes. Biological applications of nanozymes have been highlighted in basic research, industry, and translational medicine as a new cutting-edge tool. In this work, and for the first time, we disclose a tumor alleviation property of a nanozyme that is made up of amine-terminated sixth-generation polyamidoamine dendrimers with encapsulated tiny platinum nanoparticles. We systematically conducted the synthesis and characterization of the dendrimer-encapsulated Pt nanoparticles (denoted Pt-dendrimer) and confirmed their enzymatic function (hydrogen peroxide (H2O2) decomposition) within various cell lines (normal, cancerous), including glioblastoma (GBM) cells. By understanding the effects of the Pt-dendrimer at the gene level, especially related to cancer cell metastasis, we have thoroughly demonstrated its ability for tumor alleviation and suppressing GBM migration, invasion, and adhesion. The present findings show great promise for the application of the nanozyme for use in GBM-related basic research as well as at clinical sites.

Confined Electrochemiluminescence Generation at Ultra-High-Density Gold Microwell Electrodes

Electrochemiluminescence (ECL) imaging analysis based on the ultra-high-density microwell electrode array (UMEA) has been successfully used in biosensing and diagnostics, while the studies of ECL generation mechanisms with spatial resolution remain scarce. Herein we fabricate a gold-coated polydimethylsiloxane (PDMS) UMEA using electroless deposition method for the visualization of ECL reaction process at the single microwell level in conjunction with using microscopic ECL imaging technique, demonstrating that the microwell gold walls are indeed capable of enhancing the ECL generation. For the classical ECL system involving tris(2,2′-bipyridyl)ruthenium (Ru(bpy)₃²⁺) and tri-n-propylamine (TPrA), the ECL image of a single microwell appears as a surface-confined ring, indicating the ECL intensity generated inside the well is much stronger than that on the top surface of UMEA. Moreover, at a low concentration of Ru(bpy)₃²⁺, the ECL image remains to be ring-shaped with the increase of exposure time, because of the limited lifetime of TPrA radical cations TPrA^+•. In combination with the theoretical simulation, the ring-shaped ECL image is resolved to originate from the superposition effect of the mass diffusion fields at both microwell wall and bottom surfaces.

Three-Dimensional TEM Study of Dendrimer-Encapsulated Pt Nanoparticles for Visualizing Structural Characteristics of the Whole Organic-Inorganic Hybrid Nanostructure

Here, we report three-dimensional (3-D) visualization of dendrimer-encapsulated Pt nanoparticles (Pt DENs) by using 3-D electron tomography to reveal intricate structural characteristics of their whole organic-inorganic hybrid nanostructure. We reconstructed the 3-D spatial volume of Pt DENs by back-projecting a tilt series of two-dimensional (2-D) projections of Pt nanoparticles encapsulated inside dendrimers negatively stained with uranyl acetate. The direct 3-D visualization of Pt DENs elucidated their encapsulation characteristics with the spatial imaging of Pt nanoparticles embraced inside dendrimers in three dimensions. The encapsulation characteristics of Pt DENs were further verified with selective electrochemical poisoning experiments. In addition, quantitative 3-D structural characterization of Pt DENs provided more accurate and precise size distributions of nanoparticles than those obtained from conventional 2-D transmission electron microscopy analysis relying only on a 3-D structure projected on a 2-D plane.

Co nanoparticles decorated with N-doped carbon nanotubes as high-efficiency catalysts with intrinsic oxidase-like property for colorimetric sensing

Artificial nanozymes are designed for pursuing the functions of splendid catalytic efficiency and prominent selectivity of natural enzymes, meanwhile obtaining higher stability than that of natural enzymes. This emerging technology shows widespread application in the crossing field between nanotechnology and biomedicine. In this work, we employed a universal approach to fabricate a Co@N-CNTs hybrid nanocomposite as an oxidase mimic, in which fine Co nanoparticles were wrapped in N-doped carbon nanotubes, stacking on a hollow dodecahedron carbon skeleton. The synergistic effects of nanostructure engineering, N-doping and carbon coating, as well as the derived interfacial effect contribute to the glorious oxidase-like activity, stability and reusability. It can catalytically oxidize the colorless substrate 3,3′,5,5′-tetramethylbenzidine (TMB) to a blue oxidation product (ox-TMB). As a result, a colorimetric technique with excellent selectivity and sensitivity for detecting ascorbic acid (AA) with naked eyes was established, in view of specific inhibitory effects towards oxidation of TMB. Under optimal detection conditions, this method exhibits a good linearity ranging from 0.1 to 160 μM with a low limit of detection (LOD) of 0.076 μM. For practical applications, Co@N-CNTs hybrid catalyst as a mimic oxidase was used for the determination of AA in human serum, which yielded satisfactory results. This work may serve as a new research thought to guide the design of high-performance nanozymes and establish a sensing platform for the detection of AA.

In this work, we designed a Co@N-CNTs hybrid nanocomposite as an oxidase mimic for the colorimetric detection of ascorbic acid with the naked eye.

Development of luminol-fluorescamine-PVP chemiluminescence system and its application to sensitive tyrosinase determination

Fluorescamine is a popular fluorescent probe. We report for the first time that luminol chemiluminescence (CL) can be enhanced by fluorescamine in the presence of PVP. The CL intensity of luminol-fluorescamine-PVP is about 26 times stronger than that of luminol. Both the removal of oxygen and the addition of superoxide dismutase (SOD) decrease CL intensity, thiourea and NaN₃ have little effect on CL intensities, indicating that O₂^•- is critical for CL. Interestingly, o-quinone generated from phenol by tyrosinase obviously inhibited the CL intensity. Inspired by such quenching effect on the luminol-fluorescamine-PVP CL system, a sensitive CL sensing for the determination of tyrosinase activity was developed. The method can detect tyrosinase in the range of 0.07-1.5 μg mL^-1 (0.19-4.02 U mL^-1) with the detection limit of 0.035 μg mL^-1 (0.094 U mL^-1). Moreover, this method exhibits satisfied recoveries for the spiked human serum samples.

Core-shell Au@Pt Nanoparticles Catalyzed Luminol Chemiluminescence for Sensitive Detection of Thiocyanate

In this study, core-shell Au@Pt nanoparticles (Au@Pt NPs) with peroxidase catalytic activity were synthesized by the seed-mediated method, and were used to catalyze the reaction of luminol-H₂O₂ to enhance the chemiluminescence (CL) intensity. It was found that thiocyanate (SCN^-) can effectively inhibit the catalytic activity of Au@Pt NPs. Based on this phenomenon, a method to detect SCN^- by using the Au@Pt NPs-catalytic luminol-H₂O₂ CL system was established, which has an ultra-low detection limit and an ultra-wide linear range, as well as the advantages of being simple and having low-cost and convenient operation. The research mechanism indicated that SCN^- could be adsorbed on the surface of Au@Pt NPs and occupies the active sites of Pt nanostructures, which led to a decrease in the amount of Pt⁰ and a loss of the excellent catalytic activity of Au@Pt NPs. After optimizing the experimental conditions, this assay for detecting SCN^- exhibited a good linear range from 5 to 180 nM, and the low detection limit was 2.9 nM. In addition, this approach has been successfully applied to the detection of SCN^- in tap-water samples, which has practical application value and embodies good development prospects.

Silicotungstic acid as a highly efficient coreactant for luminol chemiluminescence for sensitive detection of uric acid

Herein, we report luminol-silicotungstic acid (STA) chemiluminescence (CL) for the first time. The luminol-STA system resulted in remarkable CL enhancement (65 times) compared with the known classical luminol-H₂O₂ system because of the generation of the strong oxidizing agent tungsten trioxide from STA. Based on the quenching effect of uric acid, the new CL system is applied for the sensitive and selective assay of uric acid in its pure state (LOD 0.75 nM) and in real human urine with excellent recoveries in the range of 99.6-102.3%. Furthermore, this system permits the efficient detection of STA (LOD, 0.24 μM).

Novel Chemiluminescence Sensor for Thrombin Detection Based on Dual-Aptamer Biorecognition and Mesoporous Silica Encapsulated with Iron Porphyrin

Thrombin is a marker of blood-related diseases, and its detection is of great significance in the fields of medical and biological research. Herein, a novel chemiluminescence (CL) sensor for thrombin detection was prepared based on dual-aptamer biorecognition and mesoporous silica encapsulated with iron porphyrin. Mesoporous silica encapsulated with hematin by aptamer1 (Apt1/hematin/M-SiO₂) and magnetic microspheres modified with aptamer2 (Apt2/NH₂-MS) were successfully prepared, and the two materials were used to construct a CL sensor to detect thrombin. Primarily, Apt2/NH₂-MS is used for pretreatment separation of thrombin samples by the biorecognition effect between the aptamer (Apt2) and target (thrombin). Then, thrombin/Apt2/NH₂-MS is again recognized with Apt1 on the surface of Apt1/hematin/M-SiO₂ and Apt1/thrombin/Apt2/NH₂-MS is formed, so dual-aptamer biorecognition is realized. Meanwhile, the generated Apt1/thrombin/Apt2/NH₂-MS makes Apt1 shed off the surface of M-SiO₂ and release hematin. The released hematin can catalyze the luminol-H₂O₂ CL reaction. Therefore, a sandwich-type CL sensor was constructed based on dual-aptamer biorecognition and hematin catalysis for the detection of thrombin. The sensor has a linear range of 7.5 × 10^-15 to 2.5 × 10^-10 mol·L^-1 and a detection limit of 2.2 × 10^-15 mol·L^-1 and also exhibits excellent selectivity, reproducibility, and stability. The sensor was successfully used for the detection of thrombin in serum samples, which makes it possible to apply the sensor in the detection of thrombin in actual samples.

Target-Catalyzed Self-Growing Spherical Nucleic Acid Enzyme (SNAzyme) as a Double Amplifier for Ultrasensitive Chemiluminescence MicroRNA Detection

Portable chemiluminescence (CL) imaging with a smartphone has shown a great promise for point-of-care testing of diseases, especially for acute myocardial infarction (AMI), which may occur abruptly. A challenge remains how to improve the imaging sensitivity that usually is several orders of magnitude lower than those of counterpart methodologies using the sophisticated equipment. Toward this goal, here, we report the target-triggered in situ growth of AuNP@hairpin-DNA nanoprobes into spherical nucleic acid enzymes (SNAzymes), which serve as both nanolabels and amplifiers for portable CL imaging of microRNAs (miRNAs) with an ultrahigh sensitivity comparable to that of the instrumental measurement under same conditions. A G-quadruplex (G4) DNA dense layer is dynamically produced on the gold nanocore via a DNAzyme machine-driven hairpin cleaving and captures the cofactor hemin to form the SNAzymes with higher peroxidase activity and stronger nuclease resistance than the commonly used G4 DNAzymes. The matured SNAzymes are then utilized as catalytic labels in a luminol-artesunate CL system for miRNA imaging with a smartphone as the portable detector. In this way, two AMI-related miRNAs, miRNA-499 and miRNA-133a, are successfully detected in real patients' serum with a naked eye-visualized CL change at 10 fM, showing a 5 order of magnitude improvement on the sensitivity of visualizing the same disease markers in clinical circulating blood as compared to the reported strategy. In addition, a good selectivity of our developed CL imaging platform is demonstrated. These unique features make it promising to employ this portable imaging platform for clinical AMI diagnosis.

Fabrication of Various Plasmonic Pt Nanostructures via Indium Assisted Solid-State Dewetting: From Small Nanoparticles to Widely Connected Networks

In this paper, the modified solid-state dewetting (MSSD) of well-defined and various uniform Pt nanostructures is demonstrated by the auxiliary diffusion enhancement. The MSSD utilizes the introduction of metallic indium (In) layers with high diffusivity in between sapphire and platinum (Pt) layer, through which the global diffusion and dewetting of metallic atoms can be significantly enhanced. Subsequently, the In atoms can be sublimated from the NP matrix, resulting in the formation of pure Pt NPs. By the systematic control of In and Pt bi-layer thickness, various areal density, size and configuration of Pt NPs are demonstrated. The In_{2 nm}/Pt_{2 nm} bilayers establish very small and highly dense NPs throughout the temperature range due to the early maturation of growth. Intermediate size of NPs is demonstrated with the In_{45 nm}/Pt_{15 nm} bilayers with the much improved interparticle spacings by annealing between 650 and 900 °C for 450 s. Finally, the In_{30 nm}/Pt_{30 nm} bilayers demonstrate the widely connected network-like nanostructures. In addition, the finite difference time domain (FDTD) simulation is employed to exploit the local electric field distributions at resonance wavelengths. The dewetting characteristics of In/Pt bilayers is systematically controlled by the modifications of layer thickness and annealing temperature and is systematically described based on the diffusion of atoms, Rayleigh instability and surface energy minimization mechanism. The optical properties demonstrate dynamic and widely tunable localized surface plasmon resonance (LSPR) responses depending upon the various surface morphologies of Pt nanostructures.

Pt NPs catalyzed chemiluminescence method for Hg2+ detection based on a flow injection system

Establishing a simple and accurate method for Hg²⁺ detection is of great importance for the environment and human health. In this work, platinum nanoparticles (Pt NPs) with different capped agents and morphologies were synthesized. It was found that Pt NPs exhibited peroxidase-like activity that can catalyze the chemiluminescence (CL) of the luminol system without H₂ O₂ . The most intensive CL signals were obtained by using PVP-capped Pt NPs as catalysis. Based on the fact that Hg²⁺ could further enhance the CL intensity in the Pt NPs-luminol CL system, a Pt NPs-catalyzed CL method based on a flow injection system is developed for the sensitive analysis of Hg²⁺ . When the concentration of Hg²⁺ in the system increases, the CL intensity would together increase, thereby achieving sensitive Hg²⁺ detection. The limit of detection (LOD) was calculated to be 8.6 nM. This developed method provides a simple and rapid approach for the sensitive detection of Hg²⁺ and shows great promise for applications in other complex systems.

A Robust Longitudinal Co-culture of Obligate Anaerobic Gut Microbiome With Human Intestinal Epithelium in an Anoxic-Oxic Interface-on-a-Chip

The majority of human gut microbiome is comprised of obligate anaerobic bacteria that exert essential metabolic functions in the human colon. These anaerobic gut bacteria constantly crosstalk with the colonic epithelium in a mucosal anoxic-oxic interface (AOI). However, in vitro recreation of the metabolically mismatched colonic AOI has been technically challenging. Furthermore, stable co-culture of the obligate anaerobic commensal microbiome and epithelial cells in a mechanically dynamic condition is essential for demonstrating the host-gut microbiome crosstalk. Here, we developed an anoxic-oxic interface-on-a-chip (AOI Chip) by leveraging a modified human gut-on-a-chip to demonstrate a controlled oxygen gradient in the lumen-capillary transepithelial interface by flowing anoxic and oxic culture medium at various physiological milieus. Computational simulation and experimental results revealed that the presence of the epithelial cell layer and the flow-dependent conditioning in the lumen microchannel is necessary and sufficient to create the steady-state vertical oxygen gradient in the AOI Chip. We confirmed that the created AOI does not compromise the viability, barrier function, mucin production, and the expression and localization of tight junction proteins in the 3D intestinal epithelial layer. Two obligate anaerobic commensal gut microbiome, Bifidobacterium adolescentis and Eubacterium hallii, that exert metabolic cross-feeding in vivo, were independently co-cultured with epithelial cells in the AOI Chip for up to a week without compromising any cell viability. Our new protocol for creating an AOI in a microfluidic gut-on-a-chip may enable to demonstrate the key physiological interactions of obligate anaerobic gut microbiome with the host cells associated with intestinal metabolism, homeostasis, and immune regulation.

Magnetic microspheres with polydopamine encapsulated ultra-small noble metal nanocrystals as mimetic enzymes for the colorimetric detection of H2O2 and glucose

A novel sandwich-structured magnetic microsphere with ultra-small noble metal nanocrystals as a mimetic enzyme for the colorimetric detection of H₂O₂ and glucose.

A Facile and Scalable Route to the Preparation of Catalytic Membranes with in Situ Synthesized Supramolecular Dendrimer Particle Hosts for Pt(0) Nanoparticles Using a Low-Generation PAMAM Dendrimer (G1-NH2) as Precursor

Since the first reports of Cu dendrimer-encapsulated nanoparticles (DENs) published in 1998, the dendrimer-templating method has become the best and most versatile method for preparing ultrafine metallic and bimetallic nanoparticles (1-3 nm) with well-defined compositions, high catalytic activity, and tunable selectivity. However, DENs have remained for the most part model systems with limited prospects for scale up and integration into high-performance and reusable catalytic modules and systems for industrial-scale applications. Here, we describe a facile and scalable route to the preparation of catalytic polyvinylidene fluoride (PVDF) membranes with in situ synthesized supramolecular dendrimer particles (SDPs) that can serve as hosts and containers for Pt(0) nanoparticles (2-3 nm). These new catalytic membranes were prepared using a reactive encapsulation process similar to that utilized to prepare Pt DENs by addition of a reducing agent (sodium borohydride) to aqueous complexes of Pt(II) + G4-OH/G6-OH polyamidoamine (PAMAM) dendrimers. However, the SDPs (2.4 μm average diameter) of our new mixed matrix PVDF-PAMAM membranes were synthesized in the dope dispersion without purification prior to film casting using (i) a low-generation PAMAM dendrimer (G1-NH₂) as particle precursor and (ii) epichlorohydrin, an inexpensive functional reagent, as cross-linker. In addition, the membrane PAMAM particles contain secondary amine groups (∼1.9 mequiv per gram of dry membrane), which are more basic and thus have higher Pt binding affinity than the tertiary amine groups of the G4-OH and G6-OH PAMAM dendrimers. Proof-of-concept experiments show that our new PVDF-PAMAM-G1-Pt/membranes can serve as highly active and reusable catalysts for the hydrogenation of alkenes and alkynes to the corresponding alkanes using (i) H₂ at room temperature and a pressure of 1 bar and (ii) low catalyst loadings of ∼1.4-1.6 mg of Pt. Using cyclohexene as model substrate, we observed near quantitative conversion to cyclohexane (∼98%). The regeneration studies showed that our new Pt/membrane catalysts are stable and can be reused for five consecutive reaction cycles for a total duration of 120 h including 60 h of heating at 100 °C under vacuum for substrate, product, and solvent removal with no detectable loss of cyclohexene hydrogenation activity. The overall results of our study point to a promising, versatile, and scalable path for the integration of catalytic membranes with in situ synthesized SDP hosts for Pt(0) nanoparticles into high-throughput modules and systems for heterogeneous catalytic hydrogenations, an important class of reactions that are widely utilized in industry to produce pharmaceuticals, agrochemicals, and specialty chemicals.

Determination of ferric ion via its effect on the enhancement of the chemiluminescece of the permanganate-sulfite system by nitrogen-doped graphene quantum dots

Nitrogen-doped graphene quantum dots (NGQDs) are shown to strongly enhance the integrated chemiluminescence (CL) of the permanganate-sulfite system. The mechanism of enhancement was investigated, and the catalytic effect of the NGQDs was proven. In contrast to other carbon-based nanomaterials, the enhancement by NGQDs is independent of particle size and surface. However, the pyridinic nitrogen on the surface of the NGQDs facilitates the transformation of dissolved oxygen into H₂O₂ and the generation of hydroxyl radicals. This induces the increase of CL intensity. However, in the presence of Fe³⁺, the nitrogen functions and phenol groups on the surface of the NGQDs will chelate it, and the CL signal is decreased as a result. This effect was used to design an assay for Fe³⁺ that has a wide response range (1 × 10^-8 - 1 × 10^-6 M) and a 4 nM detection limit. The method was successfully applied to the determination of Fe³⁺ in spiked real water samples. Graphical abstract Nitrogen-doped graphene quantum dots (NGQDs) are demonstrated to strongly enhance the integrated chemiluminescence (CL) of the permanganate-sulfite system. The pyridinic N-atoms in NGQDs facilitate the transformation from dissolved oxygen into H₂O₂ and the generation of •OH radicals. This leads to the highly enhanced CL of the system. In the presence of Fe³⁺, which will be chelated by the nitrogen functions and phenol groups on the surface of the NGQDs, the CL signal is decreased.

Repetitively Coupled Chemical Reduction and Galvanic Exchange as a Synthesis Strategy for Expanding Applicable Number of Pt Atoms in Dendrimer-Encapsulated Pt Nanoparticles

In this study, we report the controllable synthesis of dendrimer-encapsulated Pt nanoparticles (Pt DENs) utilizing repetitively coupled chemical reduction and galvanic exchange reactions. The synthesis strategy allows the expansion of the applicable number of Pt atoms encapsulated inside dendrimers to more than 1000 without being limited by the fixed number of complexation sites for Pt²⁺ precursor ions in the dendrimers. The synthesis of Pt DENs is achieved in a short period of time (i.e., ∼10 min) simply by the coaddition of appropriate amounts of Cu²⁺ and Pt²⁺ precursors into aqueous dendrimer solution and subsequent addition of reducing agents such as BH₄^-, resulting in fast and selective complexation of Cu²⁺ with the dendrimers and subsequent chemical reduction of the complexed Cu²⁺ while uncomplexed Pt²⁺ precursors remain oxidized. Interestingly, the chemical reduction of Cu²⁺, leading to the formation of Cu nanoparticles encapsulated inside the dendrimers, is coupled with the galvanic exchange of the Cu nanoparticles with the nearby Pt²⁺. This coupling repetitively proceeds until all of the added Pt²⁺ ions form into Pt nanoparticles encapsulated inside the dendrimers. In contrast to the conventional method utilizing direct chemical reduction, this repetitively coupled chemical reduction and galvanic exchange enables a substantial increase in the applicable number of Pt atoms up to 1320 in Pt DENs while maintaining the unique features of DENs.

Platinum nanoparticles in nanobiomedicine

Oxidative stress-dependent inflammatory diseases represent a major concern for the population's health worldwide. Biocompatible nanomaterials with enzymatic properties could play a crucial role in the treatment of such pathologies. In this respect, platinum nanoparticles (PtNPs) are promising candidates, showing remarkable catalytic activity, able to reduce the intracellular reactive oxygen species (ROS) levels and impair the downstream pathways leading to inflammation. This review reports a critical overview of the growing evidence revealing the anti-inflammatory ability of PtNPs and their potential applications in nanomedicine. It provides a detailed description of the wide variety of synthetic methods recently developed, with particular attention to the aspects influencing biocompatibility. Special attention has been paid to the studies describing the toxicological profile of PtNPs with an attempt to draw critical conclusions. The emerging picture suggests that the material per se is not causing cytotoxicity, while other physicochemical features related to the synthesis and surface functionalization may play a crucial role in determining the observed impairment of cellular functions. The enzymatic activity of PtNPs is also summarized, analyzing their action against ROS produced by pathological conditions within the cells. In particular, we extensively discuss the potential of these properties in nanomedicine to down-regulate inflammatory pathways or to be employed as diagnostic tools with colorimetric readout. A brief overview of other biomedical applications of nanoplatinum is also presented.

Artemisinin-Luminol Chemiluminescence for Forensic Bloodstain Detection Using a Smart Phone as a Detector

Forensic luminol chemiluminescence test is one of the most sensitive and popular methods for the determination of latent bloodstains. It mainly uses hydrogen peroxide or sodium perborate as coreactants. The easy decomposition of hydrogen peroxide and sodium perborate in the presence of many ions significantly affects the selectivity. Artemisinin is a natural peroxide that is quite stable in the presence of common ions. In the present study, artemisinin has been exploited for the forensic bloodstain chemiluminescence detection for the first time. Using smart phone as cost-effective portable detector, the visual detection of bloodstains has been achieved with a dilution factor of blood up to 100 000. Moreover, this system shows excellent selectivity against many common species. It can well differentiate bloodstains from other stains, such as coffee, brown sugar, and black tea. Both favorable sensitivity and selectivity makes the present method promising in forensic detection.

Enhanced anodic electrochemiluminescence of CdTe quantum dots based on electrocatalytic oxidation of a co-reactant by dendrimer-encapsulated Pt nanoparticles and its application for sandwiched immunoassays

A first immunosensor using Fe₃O₄@SiO₂-Pt DENs for carrier separation and signal amplification in the CdTe QD-TPrA anodic ECL system.