Detection of Silver Ions Using Dielectrophoretic Tweezers-Based Force Spectroscopy

A Cytidine-Modified surfactant anchored liquid crystal Droplet-Based sensor for rapid and accurate detection of silver ions

Liquid crystal (LC) droplets exhibit unique and sensitive response behaviors to surface absorptions, making them promising candidates for sensing aplications. Here, we have developed a label-free, portable, and cost-effective sensor for the specific and rapid detection of silver ions (Ag+) in drinking-water samples. To achieve this, we have modified cytidine into a surfactant (denoted as C10-M-C) and anchored it onto the surface of LC droplets. The specific binding ability between cytidine and Ag+ enables LC droplets anchored with C10-M-C to respond rapidly and specifically to Ag+ ions. Furthermore, the sensitivity of the response meets requirements for the harmless concentration of Ag+ in drinking-water. The sensor we developed is label-free, portable, and cost-effectively. We believe that the sensor reported here can be applied to the detection of Ag+ in drinking-water and environmental samples.

A ratiometric luminescence probe for selective detection of Ag+ based on thiolactic acid-capped gold nanoclusters with near-infrared emission and employing bovine serum albumin as a signal amplifier

When thiolactic acid-capped gold nanoclusters (AuNCs@TLA) with strong near-infrared (NIR, 800 nm) emission were applied to detect metal ions, only Ag+ induced the generation of two new emission peaks at 610 and 670 nm in sequence and quenching the original NIR emission. The new peak at 670 nm generated after the 800-nm emission disappeared utterly. The ratiometric and turn-on responses showed different linear concentration ranges (0.10-4.0 μmol·L-1 and 10-50 μmol·L-1) toward Ag+, and the limit of detection (LOD) was 40 nmol·L-1. Especially, the probe exhibited extremely high selectivity and strong anti-interference from other metal ions. Mechanism studies showed that the novel responses were attributed to the anti-galvanic reaction of AuNCs to Ag+ and formation of bimetallic nanoclusters. The two new emission peaks were due to the composition change and size growth of the metal core. Besides, bovine serum albumin (BSA) has been employed as a signal amplifier based on the assembly-induced emission enhancement properties of AuNCs, which improved the LOD to 10 nmol·L-1. Moreover, the ratiometric method is feasible for Ag+ detection in diluted serum with high recovery rates, showing large application potential in the biological system. The present study supplies a novel ratiometric probe for Ag+ with a two-stage response and provides a novel signal amplifier of BSA, which will facilitate and promote the application of NIR-emitted metal nanoclusters in biological system.

Electromagnetic Forces and Torques: From Dielectrophoresis to Optical Tweezers

Electromagnetic forces and torques enable many key technologies, including optical tweezers or dielectrophoresis. Interestingly, both techniques rely on the same physical process: the interaction of an oscillating electric field with a particle of matter. This work provides a unified framework to understand this interaction both when considering fields oscillating at low frequencies─dielectrophoresis─and high frequencies─optical tweezers. We draw useful parallels between these two techniques, discuss the different and often unstated assumptions they are based upon, and illustrate key applications in the fields of physical and analytical chemistry, biosensing, and colloidal science.

Ultra-sensitive dielectrophoretic surface charge multiplex detection inside a micro-dielectrophoretic device

Label-free dielectrophoretic force-based surface charge detection has shown great potential for highly sensitive and selective sensing of metal ions and small biomolecules. However, this method suffers from a complex calibration process and measurement signal interference in simultaneous multi-analyte detection, thus creating difficulties in multiplex detection. We have developed a method to overcome these issues based on the optical discrimination of the dielectrophoretic behaviors of multiple microparticle probes considering the surface charge difference before and after self-assembling conjugation. In this report, we demonstrate and characterize this dielectrophoretic force-based surface charge detection method with particle probes functionalized by various biomolecules. This technique achieved an attomolar limit of detection (LOD) for Hg²⁺ in distilled water and a femtomolar LOD in drinking water using DNA aptamer-functionalized particle probes. More importantly, using two different DNA aptamer-functionalized particle probes for Hg²⁺ and Ag⁺, label-free dielectrophoretic multiplex detection of these species in drinking water with a femtomolar and a nanomolar LOD was achieved for the first time.

Label-free fluorescent aptasensor for chloramphenicol based on hybridization chain reaction amplification and G-quadruplex/N-methyl mesoporphyrin IX complexation

The use of the broad-spectrum antibiotic chloramphenicol (CAP) in food is strictly regulated or banned in many countries. Herein, for the sensitive, rapid, and specific detection of CAP in milk, a label-free fluorescence strategy was established based on guanine (G)-quadruplex/N-methyl mesoporphyrin IX (NMM) complex formation and hybridization chain reaction (HCR) amplification. In this system, CAP can specifically bind to an aptamer (Apt) to release an Apt-C sequence from double-stranded DNA (Apt·Apt-C). Apt-C, can further hybridize with a functional hairpin DNA probe to release a primer sequence. The released primer sequence causes HCR and the formation of a nicked double-helix polymer, which contains G-quadruplex DNA. The recognition of G-quadruplex DNA by the NMM fluorochrome results in fluorescence enhancement. Consequently, CAP can be quantitatively detected by measuring the fluorescence intensity at 612 nm. The reliability of the aptasensor method was confirmed by comparison with an enzyme-linked immunosorbent assay. The proposed aptasensor was found to have a limit of detection of 0.8 pg mL⁻¹ for CAP. Moreover, when the aptasensor was applied to the detection of CAP in milk samples, the average recoveries were 99.8–108.3% with relative standard deviations of 4.5–5.2%. Thus, this CAP detection method, which is rapid with high sensitivity and selectivity, has considerable potential for a wide range of food analysis applications.

For the sensitive and specific detection of CAP in milk, a label-free fluorescence strategy was established based on guanine (G)-quadruplex/N-methyl mesoporphyrin IX (NMM) complex formation and hybridization chain reaction (HCR) amplification.

Wearable and Implantable Intraocular Pressure Biosensors: Recent Progress and Future Prospects

Biosensors worn on or implanted in eyes have been garnering substantial attention since being proven to be an effective means to acquire critical biomarkers for monitoring the states of ophthalmic disease, diabetes. Among these disorders, glaucoma, the second leading cause of blindness globally, usually results in irreversible blindness. Continuous intraocular pressure (IOP) monitoring is considered as an effective measure, which provides a comprehensive view of IOP changes that is beyond reach for the "snapshots" measurements by clinical tonometry. However, to satisfy the applications in ophthalmology, the development of IOP sensors are required to be prepared with biocompatible, miniature, transparent, wireless and battery-free features, which are still challenging with many current fabrication processes. In this work, the recent advances in this field are reviewed by categorizing these devices into wearable and implantable IOP sensors. The materials and structures exploited for engineering these IOP devices are presented. Additionally, their working principle, performance, and the potential risk that materials and device architectures may pose to ocular tissue are discussed. This review should be valuable for preferable structure design, device fabrication, performance optimization, and reducing potential risk of these devices. It is significant for the development of future practical IOP sensors.

Preparation and properties of a dual-function cellulose nanofiber-based bionic biosensor for detecting silver ions and acetylcholinesterase

A dual-function cellulose nanofiber (CNF)-based bionic biosensor with good biocompatibility was developed for detecting Ag⁺ and acetylcholinesterase (AChE) by grafting deoxyribonucleic acid (DNA) onto CNF. The Ag⁺ ions captured by the biosensor acted as recognition sites for the detection of AChE. The CNF-based bionic biosensor (CNF-DNA) could detect Ag⁺ concentrations as low as 10^-6 nM in the presence of interference metal ions (Hg²⁺, Ba²⁺, Cd²⁺, Mg²⁺, Mn²⁺, Pb²⁺, and Zn²⁺). DNA-template silver nanoclusters (DNA-AgNCs) were formed on the surface of CNF-DNA during the detection of Ag⁺ (CNF-DNA-AgNCs). This new strategy yielded CNF-DNA-AgNCs through the adsorption of Ag⁺ ions onto the cytosine base of the single-stranded DNA in CNF-DNA without the use of any additional reducer. Meanwhile, the CNF-DNA-AgNCs exhibited excellent sensitivity and selectivity for trace levels (0.053 mU/mL) of AChE in the presence of interference reagents. The novel strategy proposed in this paper may establish a foundation for further research on DNA-template AgNCs for developing biosensors and biomarkers for in vivo and in vitro detection.

Quantum Dot Arrays Fabricated Using In Situ Photopolymerization of a Reactive Mesogen and Dielectrophoresis

Dielectrophoresis (DEP) is an excellent tool for manipulating small particles within a liquid or gas medium. However, when the size of the particles is too small, such as with quantum dots (QDs), it is difficult to manipulate the particles using DEP because the dielectrophoretic force (F_DEP) depends on the volume of the particles and is therefore too weak to achieve particle migration. Herein, we demonstrate a novel method for controlling nanoscale QD particles using DEP by introducing photopolymerized reactive mesogen (RM) bead vehicles. The size of an RM bead is well-controlled by the RM concentration in the medium, and when the size is approximately 0.2 μm or larger, the RM beads can be arbitrarily manipulated using DEP under moderate electric fields. Interestingly, during photopolymerization, QD particles are easily absorbed by polymerized RM beads and most of the QDs are embedded within the RM beads. Hence, we can fabricate periodic QD arrays by manipulating the RM beads containing such dots. In addition, we can fabricate multicolor QD arrays by repeating the processes using different QD particles. The shape of a DEP-assisted QD-RM network pattern can be precisely predicted by calculating the gradient of the square of the electric field (∇E²) and the corresponding F_DEP. This new technology may be useful for the fabrication of optical devices, displays, photonic crystal devices, and bioapplications.

Variable Membrane Dielectric Polarization Characteristic in Individual Live Cells

Investigation of the dielectric properties of cell membranes plays an important role in understanding the biological activities that sustain cellular life and realize cellular functionalities. Herein, the variable dielectric polarization characteristics of cell membranes are reported. In controlling the dielectric polarization of a cell using dielectrophoresis force spectroscopy, different cellular crossover frequencies were observed by modulating both the direction and sweep rate of the frequency. The crossover frequencies were used for the extraction of the variable capacitance, which is involved in the dielectric polarization across the cell membranes. In addition, this variable phenomenon was investigated by examining cells whose membranes were cholesterol-depleted with methyl-β-cyclodextrin, which verified a strong correlation between the variable dielectric polarization characteristics and membrane composition changes. This study presented the dielectric polarization properties in live cells' membranes that can be modified by the regulation of external stimuli and provided a powerful platform to explore cellular membrane dielectric polarization.

A sensitive fluorometric sensor for Ag+ based on the hybridization chain reaction coupled with a glucose oxidase dual-signal amplification strategy

In this work, an efficient and sensitive fluorometric sensor was developed to detect silver ions (Ag⁺). It is based on the cytosine–Ag⁺–cytosine (C–Ag⁺–C) structure via a dual-signal amplification strategy using glucose oxidase (GOx) and the hybridization chain reaction (HCR). A silver-coated glass slide (SCGS) acts as an ideal material for separation. Cytosine rich (C-rich) capture DNA (C-DNA) assembled themselves on the SCGS via Ag–S bonds and hybridized with signal DNA (S-DNA) to trigger the HCR. With specific base-pairing, the S-DNA and HCR products bind on the SCGS. Then, the GOx–biotin–streptavidin (SA) complexes bind to the HCR products through SA–biotin interactions. Owing to the formation of a particular C–Ag⁺–C structure between two neighboring C-rich C-DNA on the SCGS, the C-DNA/S-DNA/HP1-GOx/HP2-GOx complex gradually moved away from the SCGS as the concentration of Ag⁺ increased and the combined GOx fell into the buffer. H₂O₂ could be generated during the oxidation of glucose, catalyzed by GOx in the buffer. Afterward, H₂O₂ could oxidize the substrate (3-(p-hydroxyphenyl)-propanoic acid) when Horseradish peroxidase was present, giving rise to blue fluorescence. The proposed strategy reached a limit of detection (LOD) of 1.8 pmol L⁻¹ with a linear detection range of 5 to 1000 pmol L⁻¹ for Ag⁺. Moreover, this assay has been commendably used for the detection of Ag⁺ in actual samples with fairly good results.

An assay for Ag⁺ based on a C–Ag⁺–C structure by utilizing a HCR/GOx dual-signal amplification strategy and SCGS as an ideal separation material.

Elucidating sensing mechanisms of a pyrene excimer-based calix[4]arene for ratiometric detection of Hg(ii) and Ag(i) and chemosensor behaviour as INHIBITION or IMPLICATION logic gates

This article reports the synthesis and characterisation of two lower rim calix[4]arene derivatives with thiourea as spacer and pyrene or methylene-pyrene as fluorophore. Both derivatives exhibit a fluorimetric response towards Hg²⁺, Ag⁺ and Cu²⁺. Only methylene-pyrenyl derivative 2 allows for selective detection of Hg²⁺ and Ag⁺ by enhancement or decrease of excimer emission, respectively. The limits of detection of 2 are 8.11 nM (Hg²⁺) and 2.09 nM (Ag⁺). DFT and TD-DFT computational studies were carried out and used to identify possible binding modes that explain the observed response during fluorescence titrations. Calculations revealed the presence of different binding sites depending on the conformation of 2, which suggest a reasonable explanation for non-linear changes in fluorescence depending on the physical nature of the interaction between metal centre and conformer. INHIBITION and IMPLICATION logic gates have also been generated monitoring signal outputs at pyrene monomer (395 nm) and excimer (472 nm) emission, respectively. Thus 2 is a potential primary sensor towards Ag⁺ and Hg²⁺ able to configure two different logic gate operations.

Generation and manipulation of isotropic droplets in nematic medium using switchable dielectrophoresis

Dielectrophoresis (DEP) in a medium with anisotropic dielectric susceptibility is very different from typical DEP in an isotropic medium: The direction of particle actuation can be switched depending on the direction of the susceptibility tensor of the medium. However, the understanding of switchable DEP (SDEP) in an anisotropic medium is still in its infant stage. Here, we investigate SDEP using heat-generated isotropic droplets in a nematic liquid crystal (LC) medium. We demonstrate that the location of the generation of isotropic droplets can be partially controlled by controlling the temperature gradient within the LC cell using dielectric loss. The SDEP actuation of isotropic droplets is also highly dependent on the location of the isotropic droplets. Using this method, we fabricated different array patterns of isotropic and nematic phase separations under different applied signals.

Fluorescence Anisotropy Reduction of An Allosteric G-Rich Oligonucleotide for Specific Silver Ion and Cysteine Detection Based on the G-Ag+-G Base Pair

Silver is a common heavy metal, and the detection of silver ion (Ag⁺) is of great importance because of its wide application and hazardous effect on the environment and human health. However, it is a great challenge to produce a large fluorescence anisotropy (FA) change for small molecules (e.g, Ag⁺). Herein, we describe a novel fluorescence anisotropy reduction approach for the sensitive and specific detection of Ag⁺. The feasibility of this method is demonstrated through screening a number of guanine-rich oligonucleotide probes. By selectively labeling the oligonucleotides with a single fluorophore tetramethylrhodamine (TMR), the reduction in FA response is associated with the conformation change from the unfolded to a hairpin-like folded structure by inducing formation of the intermolecular G-Ag⁺-G base pair, which diminishes the interaction between guanine and TMR by photoinduced electron transfer (PET). The change in FA allows the selective detection of Ag⁺ at a concentration as low as 0.5 nM with a dynamic range from 2.0 to 100 nM. The interference from the other 14 metal ions with a 100-fold even to a 1000-fold excess amount is negligible. This simple and cost-effective probe was further explored to determine cysteine (Cys) based on competing with a guanine-rich oligonucelotide for Ag⁺-binding.

Enhanced 3D paper-based devices with a personal glucose meter for highly sensitive and portable biosensing of silver ion

A variety of routine methods are available for the detection of silver (I) (Ag⁺) ions, but most of them rely on expensive, sophisticated and desktop instruments. Herein, a low-cost, instrument-free and portable Ag⁺ biosensor was described by initially designing a new class of 3D origami microfluidic paper-based analytical devices (μPADs) into each of which one piece of reagent-loaded nanoporous membrane was integrated. It combines analyte-triggered self-growing of silver nanoparticles to block the membrane's pores in situ for rapid yet efficient signal amplification with a handheld personal glucose meter for a portable and sensitive quantitative readout based on the biocatalytic reactions between the glucose oxidase and glucose. Its utility is well demonstrated with the specific detection of the analyte with a limit of detection as low as ∼58.1 pM (3σ), which makes this new biosensing method one of the most sensitive Ag⁺ assays in comparison with many other typical methods recently reported. Moreover, the satisfactory recovery of analyzing several types of real water examples, i.e., tap water, drinking water, pond water and soil water, additionally validates its feasibility for practical applications.

Dielectrophoresis Manipulation: Versatile Lateral and Vertical Mechanisms

Discussing the topic of the capability of dielectrophoresis (DEP) devices in terms of the selective detection and rapid manipulation of particles based on the DEP force (F_DEP) via contactless methods is challenging in medical research, drug discovery and delivery. Nonetheless, the process of the selective detection and rapid manipulation of particles via contactless DEP based on dielectric particles and the surrounding medium can reduce the effects of major issues, including physical contact with the particles and medium contamination to overcome operational difficulties. In this review, DEP microelectromechanical system (MEMS) microelectrodes with a tapered profile for the selective detection and rapid manipulation of particles were studied and compared with those of conventional designs with a straight-cut profile. The main objective of this manuscript is to review the versatile mechanism of tapered DEP MEMS microelectrodes for the purpose of selective detection and rapid manipulation. Thus, this review provides a versatile filtration mechanism with the potential for a glomerular-based membrane in an artificial kidneys’ development solution for implementing engineered particles and cells by lateral attraction as well as vertical repulsion in the development of lab-on-a-chip applications. For tapered DEP MEMS microelectrodes, the scope of this study methodology involved the characterisation of DEP, modelling of the polarisation factor and the dynamic dielectric changes between the particles and medium. Comprehensive discussions are presented on the capability of tapered DEP microelectrodes to drive the selected particles and the simulation, fabrication and testing of the tapered profile. This study revealed an outstanding performance with the capability of producing two regions of high electric field intensity at the bottom and top edges of the side wall of tapered microelectrodes. Observations on particle separation mainly by the lateral attraction force of particles with positive DEP on the y-axis and vertical repulsion force of particles with negative DEP on the z-axis proved an efficient and uniform F_DEP produced by tapered electrodes. In conclusion, this study confirmed the reliability and efficiency of the tapered DEP microelectrodes in the process of selective detection and rapid manipulation at a higher efficiency rate than straight-cut microelectrodes, which is significant in DEP technology applications.

Extremely sensitive and wide-range silver ion detection via assessing the integrated surface potential of a DNA-capped gold nanoparticle

With the rapid development of nanotechnology and its associated waste stream, public concern is growing over the potential toxicity exposure to heavy metal ions poses to the human body and the environment. Herein, we report an extremely sensitive Kelvin probe force microscopy (KPFM)-based platform for detecting nanotoxic materials (e.g. Ag⁺) accomplished by probing the integrated surface potential differences of a single gold nanoparticle on which an interaction between probe DNA and target DNA occurs. This interaction can amplify the surface potential of the nanoparticle owing to the coordination bond mediated by Ag⁺ (cytosine-Ag⁺-cytosine base pairs). Interestingly, compared with conventional methods, this platform is capable of extremely sensitive Ag⁺ detection (∼1 fM) in a remarkably wide-range (1 fM to 1 μM). Furthermore, this platform enables Ag⁺ detection in a practical sample (general drinking water), and this KPFM-based technique may have the potential to detect other toxic heavy metal ions and single nucleotide polymorphisms by designing specific DNA sequences.

Benzimidazole-containing aramid nanofiber for naked-eye detection of heavy metal ions

The rapid detection of heavy metal ions in wastewater has received significant attention in modern society.

A novel polydentate ligand chromophore for simultaneously colorimetric detection of trace Ag+ and Fe3. SPECTROCHIMICA ACTA. PART A, MOLECULAR AND BIOMOLECULAR SPECTROSCOPY 2017;186:17-22. [PMID: 28600992 DOI: 10.1016/j.saa.2017.06.007]

A novel polydentate ligand chromophore, 3,6-di-(N-ethyl-N-ethoxyl phenylazo) acridine (EEPA), was identified and synthesized. After its structure was characterized by FTIR, ¹H NMR, mass spectra and element analyses, it was noted to find that there was a simultaneously colorimetric response to Ag⁺ and Fe³⁺ accompanying with different color changes, i.e., from brown to light purple for Ag⁺ and further to purple-red for Fe³⁺, respectively. Their different action mechanisms, a 1:2 complex mode for EEPA-Ag⁺ and 1:1 for EEPA-Fe³⁺, were investigated and confirmed by means of Job's plot and theoretical calculation. EEPA would be a potential colorimetric chemo-dosimeter for simultaneous detection of Ag⁺ and Fe³⁺ with the detection limits of 1.6nmol·L^-1 and 69nmol·L^-1, respectively.

Automated Dielectrophoretic Tweezers-Based Force Spectroscopy System in a Microfluidic Device

We reported an automated dielectrophoretic (DEP) tweezers-based force spectroscopy system to examine intermolecular weak binding interactions, which consists of three components: (1) interdigitated electrodes and micro-sized polystyrene particles used as DEP tweezers and probes inside a microfluidic device, along with an arbitrary function generator connected to a high voltage amplifier; (2) microscopy hooked up to a high-speed charge coupled device (CCD) camera with an image acquisition device; and (3) a computer aid control system based on the LabVIEW program. Using this automated system, we verified the measurement reliability by measuring intermolecular weak binding interactions, such as hydrogen bonds and Van der Waals interactions. In addition, we also observed the linearity of the force loading rates, which is applied to the probes by the DEP tweezers, by varying the number of voltage increment steps and thus affecting the linearity of the force loading rates. This system provides a simple and low-cost platform to investigate intermolecular weak binding interactions.