Patterned Photonic Nitrocellulose for Pseudo-Paper Microfluidics

Development of an angle-adjustable photonic crystal fluorescence platform for sensitive detection of oxytetracycline

We pioneered an angle-adjustable photonic crystal fluorescence platform (APC-Fluor) that integrates PCs, an angular resolution spectrometer and a strategically aligned laser source. This configuration, featuring a coaxial rotating swing arm, allows for precise control over the angles of incidence and emission. The presence of photonic crystal microcavities facilitates the dispersion of fluorescent materials and promotes the transition of electrons from the excited state to the lowest vibrational energy level. The optical resonance effect triggered by modulating the alignment of the reflection peaks of the photonic crystals with the emission peaks of the fluorescent materials can significantly enhance the fluorescence intensity. Compared with the single BSA-AuNCs, the optimized fluorescence intensity can be significantly increased by 11.9-fold. The APC-Fluor system showcases rapid and highly sensitive detection capabilities for oxytetracycline (OTC), exhibiting a response across a concentration range from 2 to 1 × 104 nM and achieving a notably low detection limit of 1.03 nM.

Fluorescent Selectivity-Enhanced FRET Based on 3D Photonic Crystals for Multianalyte Sensing

Fluorescence resonance energy transfer (FRET) finds widespread utility in biochemical sensing, single-molecule experiments, cell physiology, and various other domains due to its inherent simplicity and high sensitivity. Nevertheless, the efficiency of energy transfer between the FRET donor and acceptor is significantly contingent on the local photonic environment, a factor that limits its application in complex systems or multianalyte detections. Here, a fluorescent selectivity-enhanced acridine orange (AO)-aflatoxins (AFs) FRET system based on a range of 3D topological photonic crystals (PCs) was developed with the aim of enhancing the selectivity and discrimination capabilities of FRET. By exploring the angle-dependent characteristics of the photonic stopband, the stopband distribution across different 3D topological PCs pixels was investigated. This approach led to selective fluorescence enhancement in PCs that matched the stopbands, enabling the successful discrimination of six distinct aflatoxins and facilitating complex multianalysis of moldy food samples. In particular, the stopband, which was strategically positioned within the blue-purple structural color range, exhibited a strong alignment with the fluorescence peaks of both the FRET donor and acceptor. This alignment allowed the 3D three-pointed star PCs to be effectively employed for the identification of mixed samples containing six distinct aflatoxins as well as the detection of real aflatoxin samples present in moldy potatoes, bread, oats, and peanuts. Impressively, this approach achieved a remarkable accuracy rate of 100%. This innovative strategy not only presents a novel avenue for developing a multitarget discrimination analysis system but also offers a convenient pretreatment method for the quantitative detection of various aflatoxins.

Screen Printed Particle-Based Microfluidics: Optimization and Exemplary Application for Heavy Metals Analysis

In this work, a screen-printing method was developed to create porous particle-based materials as layers with specifically designed shape to produce microfluidics systems. Among several tested binding agents, xanthan gum was found to be an excellent choice for a printing mixture thickener as well as a durable binder for the resulting material. In addition to demonstrating control over the shape of the printed microfluidics chips, control over material thickness, wetting characteristics and general method accuracy were also investigated. The applicability of the introduced method was further demonstrated with a development of an exemplary microfluidics chip for quantitative detection of Fe (III), Ni (II), Cu (II), Cd (II), and Pb (II) from a mixed sample at millimolar levels. The novel approaches demonstrated in this article offer new perspective into creating multiplexed on-site chemical analysis tests.

AIEgens-Doped Photonic Crystals for High Sensitivity Fluorescence Detection of Tumor Markers

Detection of tumor markers is of great significance to preliminarily judge whether patients have malignant tumors. Fluorescence detection (FD) is an effective means to achieve sensitive detection of tumor markers. Currently, the increased sensitivity of FD has attracted research interest worldwide. Here, we have proposed a method of doping luminogens with aggregation-induced emission (AIEgens) into photonic crystals (PCs), which can significantly enhance the fluorescence intensity to achieve high sensitivity in the detection of tumor markers. PCs are made by scraping and self-assembling, which has the special effect of fluorescence enhancement. The combination of AIEgens and PCs can enhance the fluorescence intensity 4-7 times. These characteristics make it extremely sensitive. The limit of detection (LOD) for the detection of alpha-fetoprotein (AFP) in the AIE10 (Tetraphenyl ethylene-Br) doped PCs with a reflection peak of 520 nm is 0.0377 ng/mL. LOD for the detection of carcinoembryonic antigen (CEA) in the AIE25 (Tetraphenyl ethylene-NH₂) doped PCs with a reflection peak of 590 nm is 0.0337 ng/mL. Our concept offers a good solution for highly sensitive detection of tumor markers.

Design and Engineering of a Palm-Sized Optical Immunosensing Device for the Detection of a Kidney Dysfunction Biomarker

Creatinine is one of the most common and specific biomarkers for renal diseases, usually found in the serum and urine of humans. Its level is extremely important and critical to know, not only in the case of renal diseases, but also for various other pathological conditions. Hence, detecting creatinine in clinically relevant ranges in a simplistic and personalized manner is interesting and important. In this direction, an optical sensing device has been developed for the simple, point-of-care detection of creatinine. The developed biosensor was able to detect creatinine quantitatively based on optical signals measured through a change in color. The sensor has been integrated with a smartphone to develop a palm-sized device for creatinine analysis in personalized settings. The sensor has been developed following facile chemical modification steps to anchor the creatinine-selective antibody to generate a sensing probe. The fabricated sensor has been thoroughly characterized by FTIR, AFM, and controlled optical analyses. The quantitative analysis is mediated through the reaction between picric acid and creatinine which was detected by the antibody-functionalized sensor probe. The differences in color intensity and creatinine concentrations show an excellent dose-dependent correlation in two different dynamic ranges from 5 to 20 μM and 35 to 400 μM, with a detection limit of 15.37 (±0.79) nM. Several interfering molecules, such as albumin, glucose, ascorbic acid, citric acid, glycine, uric acid, Na⁺, K⁺, and Cl^-, were tested using the biosensor, in which no cross-reactivity was observed. The utility of the developed system to quantify creatinine in spiked serum samples was validated and the obtained percentage recoveries were found within the range of 89.71-97.30%. The fabricated biosensor was found to be highly reproducible and stable, and it retains its original signal for up to 28 days.

Microfluidic Paper-Based Analytical Devices for the Determination of Food Contaminants: Developments and Applications

Food safety is an issue that cannot be ignored at any time because of the great impact of food contaminants on people's daily life, social production, and the economy. Because of the extensive demand for high-quality food, it is necessary to develop rapid, reliable, and efficient devices for food contaminant detection. Microfluidic paper-based analytical devices (μPADs) have been applied in a variety of detection fields owing to the advantages of low-cost, ease of handling, and portability. This review systematically discusses the latest progress of μPADs, including the fundamentals of fabrication as well as applications in the detection of chemical and biological hazards in foods, hoping to provide suitable screening strategies for contaminants in foods and accelerating the technology transformation of μPADs from the lab into the field.

A comprehensive review on advancements in tissue engineering and microfluidics toward kidney-on-chip

This review provides a detailed literature survey on microfluidics and its road map toward kidney-on-chip technology. The whole review has been tailored with a clear description of crucial milestones in regenerative medicine, such as bioengineering, tissue engineering, microfluidics, microfluidic applications in biomedical engineering, capabilities of microfluidics in biomimetics, organ-on-chip, kidney-on-chip for disease modeling, drug toxicity, and implantable devices. This paper also presents future scope for research in the bio-microfluidics domain and biomimetics domain.

One-step 3D printed intelligent silk fibroin artificial skin with built-in electronics and microfluidics

The rapid fabrication of artificial skin patches with multiple functions has attracted great attention in various research fields, such as personal health monitoring, tissue engineering and robotics. Intertwined-network structures (blood vessel, lymphatic and nerve networks) play a key role in endowing skin with multiple functions. Thus, considerable efforts have been devoted to fabricating artificial skin patches with mimetic internal channels. Here, we present a one-step 3D printed intelligent silk fibroin artificial skin (i-skin) with built-in electronics and microfluidics. By simultaneously extruding functional materials in polyurethane-silk fibroin precursor using a 3D bioprinter, the i-skin and its internal channels can be fabricated within one step. Photonic crystals (PCs) were integrated into the microfluidic channel, enabling the i-skin to sense multiple biomarkers. Moreover, the printed electronics give the i-skin remarkable conductivity, endowing the i-skin with the capability of sensitive motion sensing. Notably, by using the built-in electronics and PC-integrated microfluidics, sensitive sensing of motions and specific cardiac biomarkers can be achieved simultaneously in the i-skin, indicating the remarkable prospects of the printed multi-functional i-skin in health care-related biomedical fields.

From colloidal particles to photonic crystals: advances in self-assembly and their emerging applications

Over the last three decades, photonic crystals (PhCs) have attracted intense interests thanks to their broad potential applications in optics and photonics. Generally, these structures can be fabricated via either "top-down" lithographic or "bottom-up" self-assembly approaches. The self-assembly approaches have attracted particular attention due to their low cost, simple fabrication processes, relative convenience of scaling up, and the ease of creating complex structures with nanometer precision. The self-assembled colloidal crystals (CCs), which are good candidates for PhCs, have offered unprecedented opportunities for photonics, optics, optoelectronics, sensing, energy harvesting, environmental remediation, pigments, and many other applications. The creation of high-quality CCs and their mass fabrication over large areas are the critical limiting factors for real-world applications. This paper reviews the state-of-the-art techniques in the self-assembly of colloidal particles for the fabrication of large-area high-quality CCs and CCs with unique symmetries. The first part of this review summarizes the types of defects commonly encountered in the fabrication process and their effects on the optical properties of the resultant CCs. Next, the mechanisms of the formation of cracks/defects are discussed, and a range of versatile fabrication methods to create large-area crack/defect-free two-dimensional and three-dimensional CCs are described. Meanwhile, we also shed light on both the advantages and limitations of these advanced approaches developed to fabricate high-quality CCs. The self-assembly routes and achievements in the fabrication of CCs with the ability to open a complete photonic bandgap, such as cubic diamond and pyrochlore structure CCs, are discussed as well. Then emerging applications of large-area high-quality CCs and unique photonic structures enabled by the advanced self-assembly methods are illustrated. At the end of this review, we outlook the future approaches in the fabrication of perfect CCs and highlight their novel real-world applications.

Bio-inspired wettability patterns for biomedical applications

Benefiting from the remarkable wettability heterogeneity, bio-inspired wettability patterns present a progressive and versatile platform for manipulating and patterning liquids, which provides an emerging strategy for operating liquid samples with crucial values in biomedical applications. In this review, we present a general summary of bio-inspired wettability patterns. After a compendious introduction of natural wettability phenomena and their underlying mechanisms, we summarize the general design principles and fabrication methods for preparing artificial wettability materials. Next, we shift to patterned surface wettability with an emphasis on the fabrication approaches. Then, we discuss in detail the various practical applications of wettability patterns in the biomedical field, including cell culture, drug screening and biosensors. Critical thinking about the current challenges and future outlook is also provided. We believe that this review would propel the prosperous development of bio-inspired wettability patterns to flourish in the field of biomedical engineering.

Photonics in nature and bioinspired designs: sustainable approaches for a colourful world

Biological systems possess nanoarchitectures that have evolved for specific purposes and whose ability to modulate the flow of light creates an extraordinary diversity of natural photonic structures. In particular, the striking beauty of the structural colouration observed in nature has inspired technological innovation in many fields. Intense research has been devoted to mimicking the unique vivid colours with newly designed photonic structures presenting stimuli-responsive properties, with remarkable applications in health care, safety and security. This review highlights bioinspired photonic approaches in this context, starting by presenting many appealing examples of structural colours in nature, followed by describing the versatility of fabrication methods and designed coloured structures. A particular focus is given to optical sensing for medical diagnosis, food control and environmental monitoring, which has experienced a significant growth, especially considering the advances in obtaining inexpensive miniaturized systems, more reliability, fast responses, and the use of label-free layouts. Additionally, naturally derived biomaterials and synthetic polymers are versatile and fit many different structural designs that are underlined. Progress in bioinspired photonic polymers and their integration in novel devices is discussed since recent developments have emerged to lift the expectations of smart, flexible, wearable and portable sensors. The discussion is expanded to give emphasis on additional functionalities offered to related biomedical applications and the use of structural colours in new sustainable strategies that could meet the needs of technological development.

Modern evolution of paper-based analytical devices for wearable use: from disorder to order

Paper devices have attracted great attention for their rapid development in multiple fields, such as life sciences, biochemistry, and materials science. When manufacturing paper chips, flexible materials, such as cellulose paper or other porous flexible membranes, can offer several advantages in terms of their flexibility, lightweight, low cost, safety and wearability. However, traditional cellulose paper sheets with chaotic cellulose fiber constitutions do not have special structures and optical characteristics, leading to poor repeatability and low sensitivity during biochemical sensing, limiting their wide application. Recent evidence showed that the addition of ordered structure provides a promising method for manufacturing intelligent flexible devices, making traditional flexible devices with multiple functions (microfluidics, motion detection and optical display). There is an urgent need for an overall summary of the evolution of paper devices so that readers can fully understand the field. Hence, in this review, we summarized the latest developments in intelligent paper devices, starting with the fabrication of paper and smart flexible paper devices, in the fields of biology, chemistry, electronics, etc. First, we outlined the manufacturing methods and applications of both traditional cellulose paper devices and modern smart devices based on pseudopaper (order paper). Then, considering different materials, such as cellulose, nitrocellulose, nature sourced photonic crystals (photonic crystals sourced from nature directly) and artificial photonic crystals, we summarized a new type of smart flexible device containing an ordered structure. Next, the applications of paper devices in biochemical sensing, wearable sensing, and cross-scale sensing were discussed. Finally, we summarized the development direction of this field. The aim of this review is to take an integral cognition approach to the development of smart flexible paper devices in multiple fields and promote communications between materials science, biology, chemistry and electrical science.

A visual Hg2+ detection strategy based on distance as readout by G-quadruplex DNAzyme on microfluidic paper

In this work, we have developed a simple, fast and visual Hg²⁺ detection strategy based on distance as readout on paper chip by the Hg²⁺-mediated formation of G-quadruplex-hemin DNAzymes. In the presence of Hg²⁺, the two oligonucleotides hybridize to form G-quadruplex DNA by T-Hg²⁺-T base pair, which was able to bind hemin to form the catalytically active G-quadruplex-hemin DNAzymes. Once DNAzymes were added to react with the precipitated 3,3,5,5-tetramethyl benzidine (TMB) immobilized on the sample area, a visible color band was produced, and the formed length was positively correlated with the concentration of Hg²⁺. This biosensor is capable of selectively detecting mercuric ions with good reproducibility and satisfactory dynamic range. The limit of detection was low to 0.23 nM. Therefore, this strategy not only provides a visual and quick screen of Hg²⁺, but also shows a promising future in monitoring analysis of other metal ions in POC diagnostic field.

Micro-/Nanostructured Interface for Liquid Manipulation and Its Applications

Understanding the relationship between liquid manipulation and micro-/nanostructured interfaces has gained much attention due to the wide potential applications in many fields, such as chemical and biomedical assays, environmental protection, industry, and even daily life. Much work has been done to construct various materials with interfacial liquid manipulation abilities, leading to a range of interesting applications. Herein, different fabrication methods from the top-down approach to the bottom-up approach and subsequent surface modifications of micro-/nanostructured interfaces are first introduced. Then, interactions between the surface and liquid, including liquid wetting, liquid transportation, and a number of corresponding models, together with the definition of hydrophilic/hydrophobic, oleophilic/olephobic, the definition and mechanism of superwetting, including superhydrophobicity, superhydrophilicity, and superoleophobicity, are presented. The micro-/nanostructured interface, with major applications in self-cleaning, antifogging, anti-icing, anticorrosion, drag-reduction, oil-water separation, water collection, droplet (micro)array, and surface-directed liquid transport, is summarized, and the mechanisms underlying each application are discussed. Finally, the remaining challenges and future perspectives in this area are included.

Finding the perfect match between nanoparticles and microfluidics to respond to cancer challenges

The clinical translation of new cancer theranostic has been delayed by inherent cancer's heterogeneity. Additionally, this delay has been enhanced by the lack of an appropriate in vitro model, capable to produce accurate data. Nanoparticles and microfluidic devices have been used to obtain new and more efficient strategies to tackle cancer challenges. On one hand, nanoparticles-based therapeutics can be modified to target specific cells, and/or molecules, and/or modified with drugs, releasing them over time. On the other hand, microfluidic devices allow the exhibition of physiologically complex systems, incorporation of controlled flow, and control of the chemical environment. Herein, we review the use of nanoparticles and microfluidic devices to address different cancer challenges, such as detection of CTCs and biomarkers, point-of-care devices for early diagnosis and improvement of therapies. The future perspectives of cancer challenges are also addressed herein.

Bioinspired multistructured paper microfluidics for POCT

The rapid development of and the large market for medical diagnostics necessitate point-of-care testing (POCT) with superior sensitivity, miniaturization, multiple functionalities and high integration. Thus, flexible substrates with complex structures that provide multiple functions are in demand. Herein, we present multistructured pseudo-papers (MSPs) as a platform for building flexible microfluidics. Flexible and freestanding MSPs are generated by the self-assembly of colloidal silica crystals or core-shell copolymer elastic colloidal crystals on microcavity PDMS molds to form photonic crystals (PCs). Nitrocellulose (NC) multistructured pseudo-papers (NC MSPs) were obtained by etching SiO₂ PCs after NC precursor infiltration, while elastic copolymer (EC) multistructured pseudo-papers (EC MSPs) were directly peeled off the mold; both types of freestanding MSPs have ordered micropillars and nanocrystal structures and presented unique properties such as pumpless liquid transport and fluorescence and chemiluminescence (CL) enhancement. MSPs with designed patterns were fabricated by patterned PDMS molds, and complicated microfluidic chips were used to generate MSPs by utilizing these patterns as liquid channels. The MSPs were used for fabricating microfluidic sensors for human cardiac marker and cancer marker sensing; the features of these bioinspired MSPs indicate their potential for sensitive sensing, which will enable them to find broader applications in many fields.

Self-assembled colloidal arrays for structural color

Structural color materials that are colloidally assembled as inspired by nature are attracting increased interest in a wide range of research fields. The assembly of colloidal particles provides a facile and cost-effective strategy for fabricating three-dimensional structural color materials. In this review, the generation mechanisms of structural colors from colloidally assembled photonic crystalline structures (PCSs) and photonic amorphous structures (PASs) are first presented, followed by the state-of-the-art and detailed technologies for their fabrication. The variable optical properties of PASs and PCSs are then discussed, focusing on their spatial long- and short-order structures and surface topography, followed by a detailed description of the modulation of structural color by refractive index and lattice distance. Finally, the current applications of structural color materials colloidally assembled in various fields including biomaterials, microfluidic chips, sensors, displays, and anticounterfeiting are reviewed, together with future applications and tasks to be accomplished.

Visualized Quantitation of Trace Nucleic Acids Based on the Coffee-Ring Effect on Colloid-Crystal Substrates

We report a visualized quantitative detection method for nucleic acid amplification tests based on the coffee-ring effect on colloid-crystal substrates. The solution for loop-mediated isothermal amplification (LAMP) of DNA is drop cast on a colloid-crystal surface. After complete drying, a coffee ring containing the LAMP byproduct (i.e., magnesium pyrophosphate) is formed, and it is found that the width of the coffee ring is linearly correlated to the logarithm of the original DNA concentration before the isothermal amplification. Importantly, compared with other substrates, we found that the colloid-crystal substrate is an appropriate substrate for carrying out the assay of high sensitivity. On the basis of these findings, we develop a coffee-ring-based assay for quantitative readout of trace DNA in a sample. The assay requires 0.50 μL of the sample and is completed in 5 min in a homemade chamber with constant humidity. Semiquantitative detection of trace DNA is performed using naked eyes. With the use of a smartphone, the DNA in a sample can be quantitatively detected with a limit of detection of 20 copies.

Vertical flow assays based on core–shell SERS nanotags for multiplex prostate cancer biomarker detection

A core–shell SERS nanotag based VFA with a single test spot for multiplex biomarker detection at pg mL⁻¹ level with a wide LDR.

Integration of patterned photonic nitrocellulose and microfluidic chip for fluorescent point-of-care testing of multiple targets

With the unique capability of enhancing fluorescence, photonic material is integrated into microfluidic chip for point-of-care testing of multiple targets.

Emerging paper microfluidic devices

Paper has unique advantages over other materials, including low cost, flexibility, porosity, and self-driven liquid pumping, thus making it widely used in various fields in biology, chemistry, physics and materials science.

Bioinspired transfer method for the patterning of multiple nanomaterials

Patterned nanomaterials have promising applications in various fields, particularly for microfluidic analysis and functional surfaces.

Paper Microfluidics for Cell Analysis

Paper microfluidics has attracted much attention since its first introduction around one decade ago due to the merits such as low cost, ease of fabrication and operation, portability, and facile integration with other devices. The dominant application for paper microfluidics still lies in point-of-care testing (POCT), which holds great promise to provide diagnostic tools to meet the ASSURED criteria. With micro/nanostructures inside, paper substrates provide a natural 3D scaffold to mimic native cellular microenvironments and create excellent biointerfaces for cell analysis applications, such as long-term 3D cell culture, cell capture/phenotyping, and cell-related biochemical analysis (small molecules, protein DNA, etc.). This review summarizes cell-related applications based on various engineered paper microdevices and provides some perspectives for paper microfluidics-based cell analysis.

In situ synthesis of gold nanoparticles on pseudo-paper films as flexible SERS substrate for sensitive detection of surface organic residues

Surface enhanced Raman scattering (SERS) substrates that can be attached to rough, irregular surfaces and directly collect samples is especially useful for the detection of surface organic residues. Herein, novel AuNPs-pseudo-paper films (APPFs) with uniform structure, flexible properties and wicking capabilities were first fabricated and used as SERS substrate for the sensitive detection of surface pesticides residues. Gold nanoparticles (AuNPs) were in situ synthesized on pseudo-paper films (PPFs) by iterative seeding method to create lots of "hot-spots", accordingly exhibiting high SERS activity (SERS enhancement factor of 3.02 × 10⁶). By virtue of polyethylenimine (PEI) grafted onto the dissolved microcrystalline cellulose (MCC), AuCl₄^- and AuNPs can firmly be bonded to the surfaces of PPFs. The prepared APPFs show high reproducibility (relative standard deviation of 6.13%), which is attributed to the uniform surface of the films. The fabricated APPFs SERS substrate allows rapid detection of surface pesticides residues by a facile "swabbing-measure" detection mode avoiding tedious and time-consuming sampling and separation processes. Based on their inherent SERS spectra, thiram, parathion methyl, and malachite green (MG) can be simultaneously detected on apple peel, which demonstrates the potential applicability of this developed protocol for surface organic residues analysis in agriculture and food security.

Disposable Morpho menelaus Based Flexible Microfluidic and Electronic Sensor for the Diagnosis of Neurodegenerative Disease

Rapid early disease prevention or precise diagnosis is almost impossible in low-resource settings. Natural ordered structures in nature have great potential for the development of ultrasensitive biosensors. Here, motivated by the unique structures and extraordinary functionalities of ordered structures in nature, a biosensor based on butterfly wings is presented. In this study, a flexible Morpho menelaus (M. menelaus) based wearable sensor is integrated with a microfluidic system and electronic networks to facilitate the diagnosis of neurodegenerative disease (ND). In the microfluidic section, the structural characteristics of the M. menelaus wings up layer are combined with SiO₂ nanoparticles to form a heterostructure. The fluorescent enhancement property of the heterostructure is used to increase the fluorescent intensity for multiplex detection of two proteins: IgG and AD7c-NTP. For the electronic section, conductive ink is blade-coated on the under layer of wings for measuring resistance change rate to obtain the frequency of static tremors of ND patients. The disposable M. menelaus based flexible microfluidic and electronic sensor enables biochemical-physiological hybrid monitoring of ND. The sensor is also amenable to a variety of applications, such as comprehensive personal healthcare and human-machine interaction.

A multifunctional wearable sensor based on a graphene/inverse opal cellulose film for simultaneous, in situ monitoring of human motion and sweat

A multifunctional, wearable sensor based on a reduced oxide graphene (rGO) film onto a porous inverse opal acetylcellulose (IOAC) film has been developed and can perform simultaneous, in situ monitoring of various human motions and ion concentrations in sweat. The rGO film is used as a strain-sensing layer for monitoring human motion via its resistance change, whereas the porous IOAC film is used as a flexible microstructured substrate not only for high sensitive motion sensing, but also for collection and analysis of ion concentrations in sweat by its simple colorimetric changes or reflection-peak shifts. Studies on humans demonstrated that the devices have excellent capability for monitoring various human motions, such as finger bending motion, wrist bending motion, head rotation motion and various small-scale motions of the throat. Simultaneous, in situ analysis of the ion concentration in sweat during these motions shows that the IOAC substrate can detect a wide range of NaCl concentrations in sweat from normal 30 to 680 mM under the conditions of severe dehydration. This investigation provides new horizons toward the design and fabrication of multifunctional, wearable health monitoring devices and the proposed wearable sensor shows promising applications in healthcare and preventive medicine.

Patterned Colloidal Photonic Crystals

Colloidal photonic crystals (PCs) have been well developed because they are easy to prepare, cost-effective, and versatile with regards to modification and functionalization. Patterned colloidal PCs contribute a novel approach to constructing high-performance PC devices with unique structures and specific functions. In this review, an overview of the strategies for fabricating patterned colloidal PCs, including patterned substrate-induced assembly, inkjet printing, and selective immobilization and modification, is presented. The advantages of patterned PC devices are also discussed in detail, for example, improved detection sensitivity and response speed of the sensors, control over the flow direction and wicking rate of microfluidic channels, recognition of cross-reactive molecules through an array-patterned microchip, fabrication of display devices with tunable patterns, well-arranged RGB units, and wide viewing-angles, and the ability to construct anti-counterfeiting devices with different security strategies. Finally, the perspective of future developments and challenges is presented.

Double Replication of Silica Colloidal Crystal Films

Inverse opals made by polymerizing vinyl monomers inside a colloidal crystal have lattice dimensions that are contracted relative to the original hard template. This effect was studied in order to investigate the possibility of making double replicas of varying pore sizes from different materials, and to gain a better understanding of the polymer contraction behavior during replication. The degree of lattice contraction was measured using colloidal crystal films formed from silica spheres with diameters in the range 33-225 nm, and polymers pEDMA [poly(1,2-ethanediol dimethacrylate)], pDVB [poly(divinylbenzene)], pHDMA [poly(1,6-hexanediol dimethacrylate)], pBDMA [poly(1,4-butanediol dimethacrylate)], and a 5:4 copolymer mixture of pEDMA/pDVB. The degree of lattice contraction depended on the alkyl chain length of the monomer, as well as the degree of cross-linking, with up to 32% contraction observed for pEDMA when the silica template was removed. However, filling the polymer inverse opals with silica or titania returned the lattice spacing closer to its original size, an effect that can be rationalized in terms of the driving forces for contraction. Double replication of both single-component and binary silica colloidal crystals therefore generated silica and titania replicas of the original lattice. Thus, double replication provides a pathway for accessing periodic structures that are difficult to synthesize directly from materials such as titania.

Transpiration-Inspired Fabrication of Opal Capillary with Multiple Heterostructures for Multiplex Aptamer-Based Fluorescent Assays

In this work we report a method for the fabrication of opal capillary with multiple heterostructures for aptamer-based assays. The method is inspired by plant transpiration. During the fabrication, monodisperse SiO₂ nanoparticles (NPs) self-assemble in a glass capillary, with the solvent gradually evaporating from the top end of the capillary. By a simple change of the colloid solution that wicks through the capillary, multiple heterostructures can be easily prepared inside the capillary. On the surface of the SiO₂ NPs, polydopamine is coated for immobilization of aminomethyl-modified aptamers. The aptamers are used for fluorescent detection of adenosine triphosphate (ATP) and thrombin. Owing to fluorescence enhancement effect of the photonic heterstructures, the fluorescent signal for detection is amplified up to 40-fold. The limit of detection is 32 μM for ATP and 8.1 nM for thrombin. Therefore, we believe this method is promising for the fabrication of analytical capillary devices for point-of-care testing.

Ultrasensitive Detection of Protein with Wide Linear Dynamic Range Based on Core-Shell SERS Nanotags and Photonic Crystal Beads

Detection of proteins in a wide concentration range from fg mL^-1 to sub mg mL^-1 is a challenge in the high throughput analysis of precision medicine. Herein, we proposed a biosensor consisting of core-shell surface-enhanced Raman scattering (SERS) nanotags as labels and photonic crystal beads (PCBs) as carriers for ultrasensitive detection of proteins. In practice, Raman dyes (RDs) were embedded in the interface of gold core and silver shell in the bimetal nanoparticles to form SERS nanotags. It was found that the sensitivity was significantly improved due to the enhanced Raman signal by the coupling of the core-shell structure and linear dynamic range (LDR) was extended owing to the high surface to volume ratio of PCBs as well. In addition, we also demonstrated that the biosensor exhibited fine stability and low background, which has great application potential in the detection of protein biomarkers.

Vapor sensing with color-tunable multilayered coatings of cellulose nanocrystals

Colloidal cellulose nanocrystals were LBL deposited to form firmly-stacked optical coatings in which the nanorods regulated their head-to-tail association and aligned in the axial-centrifuged direction. The periodically transition from blue to orange of reflected colors was tunable via deposition layer adjustment. While the sensing coating was exposed to vapors of NH₃^.H₂O, H₂O, HCl and HAc, respectively, the color variation in the response process was irreversible at room temperature and highly dependent on vapor diffusion and chemical interface interaction. Consequently, HAc vapor presented the longest sensing transition of wavelength, whereas the alkaline NH₃^.H₂O displays a less recovery ratio than HAc and H₂O at room temperature. Under heating at 50°C, the sensed coatings could mostly be restored to their original state except HCl-etched one. Therefore, the naked-eyed qualitative detectability of vapors by nanocellulose could be realized by the divergence in color shift which is of great importance in chemical sensors.

A dual enzyme-inorganic hybrid nanoflower incorporated microfluidic paper-based analytic device (μPAD) biosensor for sensitive visualized detection of glucose

A novel microfluidic paper-based analytic device (μPAD) biosensor is developed for sensitive and visualized detection of glucose. This biosensor is easily fabricated using the wax printing technique, with a hybrid nanocomplex composed of dual enzymes glucose oxidase (GOx) and horseradish peroxidase (HRP) and Cu₃(PO₄)₂ inorganic nanocrystals incorporated in the detection zones. The hybrid nanocomplex is found to exhibit a flower-like structure, which allows co-immobilization of these two enzymes in a biocompatible environment. These nanoflowers not only preserve the activity and enhance the stability of the enzymes, but also facilitate the transport of the substrates between the two enzymes. The biosensor is demonstrated to enable rapid and sensitive quantification of glucose in the concentration range of 0.1-10 mM with a limit of detection (LOD) of 25 μM. It is also shown to be applicable to colorimetric quantitative detection of glucose in human serum and whole blood samples, implying its potential for clinical applications.

Hierarchically structured photonic crystals for integrated chemical separation and colorimetric detection

A SiO₂ colloidal photonic crystal film with a hierarchical porous structure is fabricated to demonstrate an integrated separation and colorimetric detection of chemical species for the first time. This new photonic crystal based thin layer chromatography process requires no dyeing, developing and UV irradiation compared to the traditional TLC. The assembling of mesoporous SiO₂ particles via a supersaturation-induced-precipitation process forms uniform and hierarchical photonic crystals with micron-scale cracks and mesopores, which accelerate the diffusion of developers and intensify the adsorption/desorption between the analytes and silica for efficient separation. Meanwhile, the chemical substances infiltrated to the voids of photonic crystals cause an increase of the refractive index and a large contrast of structural colors towards the unloaded part, so that the sample spots can be directly recognized with the naked eye before and after separation.

Paper-based microfluidic devices by asymmetric calendaring

We report a simple, efficient, one-step, affordable method to produce open-channel paper-based microfluidic channels. One surface of a sheet of paper is selectively calendared, with concomitant hydrophobization, to create the microfluidic channel. Our method involves asymmetric mechanical modification of a paper surface using a rolling ball (ball-point pen) under a controlled amount of applied stress (σ_z) to ascertain that only one side is modified. A lubricating solvent (hexane) aids in the selective deformation. The lubricant also serves as a carrier for a perfluoroalkyl trichlorosilane allowing the channel to be made hydrophobic as it is formed. For brevity and clarity, we abbreviated this method as TACH (Targeted Asymmetric Calendaring and Hydrophobization). We demonstrate that TACH can be used to reliably produce channels of variable widths (size of the ball) and depths (number of passes), without affecting the nonworking surface of the paper. Using tomography, we demonstrate that these channels can vary from 10s to 100s of microns in diameter. The created hydrophobic barrier extends around the channel through wicking to ensure no leakages. We demonstrate, through modeling and fabrication, that flow properties of the resulting channels are analogous to conventional devices and are tunable based on associated dimensionless numbers.