Solvatochromic Probes Displaying Unprecedented Organic Liquids Discriminating Characteristics

Water-Soluble Single-Benzene Chromophores: Excited State Dynamics and Fluorescence Detection

Two water-soluble single-benzene-based chromophores, 2,5-di(azetidine-1-yl)-tereph- thalic acid (DAPA) and its disodium carboxylate (DAP-Na), were conveniently obtained. Both chromophores preserved moderate quantum yields in a wide range of polar and protonic solvents. Spectroscopic studies demonstrated that DAPA exhibited red luminescence as well as large Stokes shift (>200 nm) in aqueous solutions. Femtosecond transient absorption spectra illustrated quadrupolar DAPA usually involved the formation of an intramolecular charge transfer state. Its Frank−Condon state could be rapidly relaxed to a slight symmetry-breaking state upon light excitation following the solvent relaxation, then the slight charge separation may occur and the charge localization became partially asymmetrical in polar environments. Density functional theory (DFT) calculation results were supported well with the experimental measurements. Unique pH-dependent fluorescent properties endows the two chromophores with rapid, highly selective, and sensitive responses to the amino acids in aqueous media. In detail, DAPA served as a fluorescence turn-on probe with a detection limit (DL) of 0.50 μM for Arg and with that of 0.41 μM for Lys. In contrast, DAP-Na featured bright green luminescence and showed fluorescence turn-off responses to Asp and Glu with the DLs of 0.12 μM and 0.16 μM, respectively. Meanwhile, these two simple-structure probes exhibited strong anti-interference ability towards other natural amino acids and realized visual identification of specific analytes. The present work helps to understand the photophysic−structure relationship of these kinds of compounds and render their fluorescent detection applications.

Three-photon absorption iridium(iii) photosensitizers featuring aggregation induced emission

Ir-H exhibits better three-photon absorption aggregation induced emission property, and thus can enhance the photodynamic therapy efficiency.

Dual-Mode Photonic Sensor Array for Detecting and Discriminating Hydrazine and Aliphatic Amines

Colorimetric chemosensors have attracted tremendous interest for sensing hazardous substances in an uncomplicated and economical manner. Herein, a series of push-pull dicyanovinyl-substituted oligothiophene derivatives were designed, and the impacts of different end-cappers on their photophysical properties were comprehensively investigated. Interestingly, combined with a zinc porphyrin derivative (Zn-TPP), one dicyanovinyl-substituted oligothiophene derivative (NA-3T-CN) can be further developed into colorimetric and fluorescent sensor array for dual-mode detection of aliphatic amines and hydrazine. The obtained sensors showed satisfactory results between optical response and analyte's concentration both in selective single-sensor type and in enhanced multisensory mode. Based on the fluorescence change of the NA-3T-CN system, the detection limit for N₂H₄ was calculated to be around 1.22 × 10^-5 mol/L in THF. The stained TLC-supported sensor array offers obvious optical changes for down to 0.5 wt % hydrazine solution for naked-eye sensing. An aromatic amine like aniline has no obvious effect on the dicyanovinyl-substituted oligothiophene derivatives. We also found that a zinc porphyrin derivative has an obvious colorimetric response to the presence of hydrazine, ethanolamine, and aniline. Furthermore, smartphone-enabled readout system and data treatment based on RGB changes of the sensor array were performed, and the discrimination capability among hydrazine, aliphatic amines, and aromatic amine was satisfactory. In this regard, related push-pull oligothiophene derivatives not only can be regarded as models for a fundamental understanding of the relationship between molecular structure and photophysical properties but also present potential applications in the field of real-time and visual detection of hazardous chemicals.

1,3,5-Trifluoro-2,4,6-triiodobenzene: A neglected NIR phosphor with prolonged lifetime by σ-hole and π-hole capture

Room temperature phosphorescence (RTP) materials have become a hot topic in fields of organic light-emitting dioes, biological sensing and imaging. The present work reports firstly that 1,3,5-trifluoro-2,4,6-triiodobenzene (TITFB) can act as a simple pure organic NIR phosphor due to its novel function in promoting n-π∗ transition. Also, TITFB crystal has longer phosphorescence lifetime than other ordinary multiiodoluminophors and TITFB powder. Based on the TITFB crystal structure, σ-hole and π-hole capture mechanism of n-electron is proposed, i.e., the excited state energy is decreased and n-electrons are stabilized to cause slower radiative decay rate due to the restriction of σ-hole and π-hole bond. Both computational and experimental studies support the mechanism. The new electron-capture mode is more conducive to understanding pure organic ultralong lifetime RTP.

Development of a Column-Shaped Fluorometric Sensor Array and Its Application in Visual Discrimination of Alcohols from Vapor Phase

Portable, miniaturized, and inexpensive detectors are in high demand for detecting and discriminating volatile organic compounds (VOCs). Sensor array design and exploitation are two key issues for new detector development. In contrast to the most reported plane-shaped sensor array for gaseous analyte sensing, here we report a column-shaped fluorometric sensor array by using fluorophore-loaded silica particles (∼40 μm) filled capillary. In the design, the capillary serves as test chamber and facilitates visualization. The orifices of the capillary were used as inlet and outlet for gaseous analyte. Sensing modules are installed in series, which lays foundation for their even and effective contact with the gaseous analyte. Meanwhile, further capsulation could be avoided. Silica particles were chosen as carries due to their preferred adsorption behavior to VOCs. By choosing four typical fluorophores (PBI-CB, Py-CB-Ph, Py-At, and NA-Ch) as sensing units, a 4-element fluorometric sensor array was achieved. Fluorescence of the array varied when different alcohol vapors were pumped in. The six tested alcohols could not only be distinguished as primary, secondary, or tertiary, but also be identified individually. The array had good reproducibility in visualization of the six alcohols. In addition, the orders of the fluorophores can be changed as desired. It is believed that the proofed concept provides not only a totally new design of sensor array but also contributes a new strategy for the discrimination of the alcohols as examined.

Single-Benzene-Based Solvatochromic Chromophores: Color-Tunable and Bright Fluorescence in the Solid and Solution States

The search for structurally simple chromophores with superior fluorescence brightness and a wide range of solvent compatibility is highly desirable. Herein, a new type of single-benzene-based solvatochromic chromophore with a symmetric bifunctional structure, in which azetidine and ethoxycarbonyl moieties serve as the electron-donating and -withdrawing groups, respectively, is reported. This chromophore exhibits an extraordinary wide range of solvent compatibility and preserves excellent fluorescence quantum yields from nonpolar n-hexane to polar methanol and even in water. Unusually, the symmetric structure of the chromophore shows a distinct color change from bright green to red with increasing solvent polarity and possesses large Stokes shifts (λ=132-207 nm) in the tested solvents. Moreover, this single-benzene-based chromophore displays good photochemical stability in both solution and solid states, and even exhibits reversible mechanochromic luminescence.

Carbazole and fluorene polyaniline derivatives: Synthesis, properties and application as multiple stimuli-responsive fluorescent chemosensor

Development of conjugated polymers with fluorescence sensing characteristics has received close attention from researchers in fields of environmental protection, biosensing and toxins detection on food. In this paper, novel polyaniline derivatives of poly(9-methyl-9H-carbazol-3-amine) and poly(9,9-dihexyl-9H-fluoren-2-amine) are prepared by facile chemical polymerization. Then they are characterized with NMR (Nuclear Magnetic Resonance), GPC (Gel Permeation Chromatography), XRD (X-Ray Diffraction), FT-IR (Fourier Transform Infrared spectroscopy), FL (Fluorescence spectrometry) and UV-vis (Ultraviolet-visible spectroscopy) characterizations and further applied to the fluorescence detection of different acids and amines. Moreover, the obtained poly(9-methyl-9H-carbazol-3-amine) displays excellent fluorescence properties in the detection for both acids and amines. Besides, this poly(9-methyl-9H-carbazol-3-amine) can not only be used for fluorescence detection in solution, but also can be prepared into solid state and applied in the gas phase fluorescence detection. This work has greatly expanded the scope of application to these polyaniline derivatives materials, opening a new path for the researches on multi-functional chemosensor.

A single 9-mesityl-10-methylacridinium ion as a solvatochromic sensor array for multicolor visual discrimination of solvents

We report a single 9-mesityl-10-methylacridinium ion (Acr+-Mes) as a solvatochromic sensor array for multicolor visual discrimination of solvents. The composite fluorescent response of Acr+-Mes to polarity, dispersed state, and lone-pair-π interactions produces different colors when it is dissolved in various solvents. The corresponding RGB values as sensing elements are extracted to create distinct fluorescence response patterns for each solvent. With the help of principal component analysis, common solvents, such as water (H2O), absolute ethanol (EtOH), acetonitrile (MeCN), dimethyl sulfoxide (DMSO), acetone (CO(Me)2), dichloromethane (DCM), trichloromethane (TCM), tetrahydrofuran (THF), toluene (PhMe), and tetrachloromethane (CCl4), are successfully discriminated and identified with an accuracy of 100%. What's more, this sensor array can also discriminate binary solvent mixtures and quantitatively detect DMSO in organic and inorganic solvents.

Fast, sensitive, selective and reversible fluorescence monitoring of TATP in a vapor phase

The development of sensors for the detection of triacetone triperoxide (TATP) has attracted great attention. Here, we constructed a low-cost, portable, reusable, visible paper-based fluorescent sensor for the sensitive detection of TATP via vapor sampling. Under optimized conditions, the fluorescent film showed a high sensitivity to TATP with a detection limit of lower than 0.5 μg mL-1 in air. The linear range of the response is from 0.5 to 8.0 μg mL-1. In addition, the paper-based sensor exhibited high selectivity to TATP. The presence of potential interferents showed little effect on sensing. Moreover, sensing is fully reversible. Fortunately, the test can also be conducted in a visualized way.

High Photostability in Nonconventional Coumarins with Far-Red/NIR Emission through Azetidinyl Substitution

Replacement of electron-donating N,N-dialkyl groups with three- or four-membered cyclic amines (e.g., aziridine and azetidine, respectively) has been described as a promising approach to improve some of the drawbacks of conventional fluorophores, including low fluorescent quantum yields (Φ_F) in polar solvents. In this work, we have explored the influence of azetidinyl substitution on nonconventional coumarin-based COUPY dyes. Two azetidine-containing scaffolds were first synthesized in four linear synthetic steps and easily transformed into far-red/NIR-emitting fluorophores through N-alkylation of the pyridine moiety. Azetidine introduction in COUPY dyes resulted in enlarged Stokes' shifts with respect to the N,N-dialkylamino-containing parent dyes, but the Φ_F were not significantly modified in aqueous media, which is in contrast with previously reported observations in other fluorophores. However, azetidinyl substitution led to an unprecedented improvement in the photostability of COUPY dyes, and high cell permeability was retained since the fluorophores accumulated selectively in mitochondria and nucleoli of HeLa cells. Overall, our results provide valuable insights for the design and optimization of novel fluorophores operating in the far-red/NIR region, since we have demonstrated that three important parameters (Stokes' shifts, Φ_F, and photostability) cannot be always simultaneously addressed by simply replacing a N,N-dialkylamino group with azetidine, at least in nonconventional coumarin-based fluorophores.

Naphthalimide-Based Fluorophore for Soft Anionic Interface Monitoring

A naphthalimide-based low-molecular-mass fluorophore (NA) was designed and synthesized by introducing an azetidine unit onto the aromatic ring of the compound as an electron-donating structure, and a hydrophilic (2-(2-aminoethyl-amino)ethanol) moiety into the "N-imide site" of the core structure. UV-vis absorption and fluorescence measurements revealed that the fluorophore is soluble in water and shows a fluorescent quantum yield of ∼20% and lifetime of ∼3.7 ns in the solvent within a wide pH range. Moreover, the fluorescence emission and anisotropy of the fluorophore as produced are both dependent upon the viscosity and polarity of the medium. Further studies demonstrated that NA can be used as a selective probe to monitor the aggregation of anionic surfactants owing to its accumulation onto the anionic surfaces of the aggregates as formed. Inspired by the discovery, NA was successfully applied for detection of cell membranes and E. coli via monitoring of their negatively charged surfaces, which is important for fast checking of biological contamination of water. Importantly, all the tests could be performed in a visualized manner. We believe that the new, low-molecular-mass fluorophore as created may find applications in chemical and biochemical sensing and imaging.

Reunderstanding the Fluorescent Behavior of Four-Coordinate Monoboron Complexes Containing Monoanionic Bidentate Ligands

We demonstrated for the first time that, at temperatures below the melting point of a given polar solvent, the emission of some four-coordinate monoboron complexes containing monoanionic bidentate (NO) ligands shifted to lower wavelengths, but no such shift was observed for studies conducted in nonpolar solvents. This means that the emission from a polar solvent appears at shorter wavelengths if compared with that from a nonpolar solvent when the measurement was performed at low temperatures, a phenomenon totally different from that observed for conventional solvatochromic fluorophores. The finding was rationalized by considering the temperature-dependent conformational relaxation of the tetrahedron monoboron complexes from their local excited (LE) state to their relaxed excited (RE) state. Further studies revealed that variating the structure of the chelating ligands could result in remarkable changes in the fluorescent colors of the monoboron complexes. However, changing the structure of other two monodentate ligands showed little effect upon the fluorescence property of the compounds. Therefore, it is anticipated that the monoboron complexes may be taken as a platform to construct a variety of functional molecular systems via alternating the structure of the chelating ligand and that of the monodentate ligand. As an example, naphthalene was introduced as a monodentate ligand, and independent emissions from naphthalene unit and the other part of the monoboron complex as well as intramolecular energy transfer between them were observed. It is believed that the present work provides a new insight into the monoboron complexes, laying the foundation for them to be explored for developing novel molecular systems.

Synthesis and optical and electrochemical properties of julolidine-structured pyrido[3,4-b]indole dye

The julolidine-structured pyrido[3,4-b]indole dye ET-1 possesses the ability to act as a calorimetric and fluorescent sensor for Brønsted and Lewis acids.