Engineering Carbon Nanotube Fiber for Real-Time Quantification of Ascorbic Acid Levels in a Live Rat Model of Alzheimer’s Disease

Ultrasensitive Fluorescence Detection of Ascorbic Acid Using Silver Ion-Modulated High-Quality CdSe/CdS/ZnS Quantum Dots

Improving the sensitivity of the fluorescence method for the detection of bioactive molecules is crucial in biochemical analysis. In this work, an ultrasensitive sensing strategy was constructed for the detection of ascorbic acid (AA) using high-quality 3-mercaptopropionic acid-capped CdSe/CdS/ZnS quantum dots (MPA-CdSe/CdS/ZnS QDs) as the fluorescent probe. The prepared water-soluble QDs exhibited a high photoluminescence quantum yield (PL QY) of up to 96%. Further, the fluorescence intensity of the QDs was intensively quenched through the dynamic quenching of Ag+ ions due to an efficient photoinduced electron transfer progress. While the existence of AA before adding Ag+ ions, Ag+ ions were reduced. Thus, the interaction of the QDs and Ag+ ions was destroyed, which led to the fluorescence distinct recovery. The detection limit of AA could be as low as 0.2 nM using this sensing system. Additionally, most relevant small molecules and physiological ions had no influence on the analysis of AA. Satisfactory results were obtained in orange beverages, showing its great potential as a meaningful platform for highly sensitive and selective AA sensing for clinical analysis.

Efficient Electrochemical Microsensor for the Simultaneous Measurement of Hydrogen Peroxide and Ascorbic Acid in Living Brains

Hydrogen peroxide (H2O2) and ascorbic acid (AA), acting as two significant indicative species, correlate with the oxidative stress status in living brains, which have historically been considered to be involved mainly in neurodegenerative disorders such as Alzheimer's disease, Huntington's disease, and Parkinson's disease (PD). The development of efficient biosensors for the simultaneous measurement of their levels in living brains is vital to understand their roles played in the brain and their interactive relationship in the progress of these diseases. Herein, a robust ratiometric electrochemical microsensor was rationally designed to realize the determination of H2O2 and AA simultaneously. Therefore, a specific probe was designed and synthesized with both recognition units responsible for reacting with H2O2 to produce a detectable signal on the microsensor and linkage units helping the probe modify onto the carbon substrate. A topping ingredient, single-walled carbon nanotubes (SWCNTs) was added on the surface of the electrode, with the purpose of not only facilitating the oxidation of AA but also absorbing methylene blue (MB), prompting to read out the inner reference signal. This proposed electrochemical microsensor exhibited a robust ability to real-time track H2O2 and AA in linear ranges of 0.5-900 and 10-1000 μM with high selectivity and accuracy, respectively. Eventually, the efficient electrochemical microsensor was successfully applied to the simultaneous measurement of H2O2 and AA in the rat brain, followed by microinjection, and in the PD mouse brain.

Biomedical Applications of CNT-Based Fibers

Carbon nanotubes (CNTs) have been regarded as emerging materials in various applications. However, the range of biomedical applications is limited due to the aggregation and potential toxicity of powder-type CNTs. To overcome these issues, techniques to assemble them into various macroscopic structures, such as one-dimensional fibers, two-dimensional films, and three-dimensional aerogels, have been developed. Among them, carbon nanotube fiber (CNTF) is a one-dimensional aggregate of CNTs, which can be used to solve the potential toxicity problem of individual CNTs. Furthermore, since it has unique properties due to the one-dimensional nature of CNTs, CNTF has beneficial potential for biomedical applications. This review summarizes the biomedical applications using CNTF, such as the detection of biomolecules or signals for biosensors, strain sensors for wearable healthcare devices, and tissue engineering for regenerating human tissues. In addition, by considering the challenges and perspectives of CNTF for biomedical applications, the feasibility of CNTF in biomedical applications is discussed.

Challenges and strategies faced in the electrochemical biosensing analysis of neurochemicals in vivo: A review

Our brain is an intricate neuromodulatory network, and various neurochemicals, including neurotransmitters, neuromodulators, gases, ions, and energy metabolites, play important roles in regulating normal brain function. Abnormal release or imbalance of these substances will lead to various diseases such as Parkinson's and Alzheimer's diseases, therefore, in situ and real-time analysis of neurochemical interactions in pathophysiological conditions is beneficial to facilitate our understanding of brain function. Implantable electrochemical biosensors are capable of monitoring neurochemical signals in real time in extracellular fluid of specific brain regions because they can provide excellent temporal and spatial resolution. However, in vivo electrochemical biosensing analysis mainly faces the following challenges: First, foreign body reactions induced by microelectrode implantation, non-specific adsorption of proteins and redox products, and aggregation of glial cells, which will cause irreversible degradation of performance such as stability and sensitivity of the microsensor and eventually lead to signal loss; Second, various neurochemicals coexist in the complex brain environment, and electroactive substances with similar formal potentials interfere with each other. Therefore, it is a great challenge to design recognition molecules and tailor functional surfaces to develop in vivo electrochemical biosensors with high selectivity. Here, we take the above challenges as a starting point and detail the basic design principles for improving in vivo stability, selectivity and sensitivity of microsensors through some specific functionalized surface strategies as case studies. At the same time, we summarize surface modification strategies for in vivo electrochemical biosensing analysis of some important neurochemicals for researchers' reference. In addition, we also focus on the electrochemical detection of low basal concentrations of neurochemicals in vivo via amperometric waveform techniques, as well as the stability and biocompatibility of reference electrodes during long-term sensing, and provide an outlook on the future direction of in vivo electrochemical neurosensing.

In Situ Ratiometric Determination of Cerebral Ascorbic Acid after Ischemia Reperfusion

Ascorbic acid (AA) is significant in protecting the brain from further damage and maintaining brain homeostasis after ischemia stroke (IS); however, the dynamic change of cerebral AA content after different degrees of ischemic stroke is still unclear. Herein, carboxylated single-walled carbon nanotube (CNT-COOH)- and polyethylenedioxythiophene (PEDOT)-modified carbon fiber microelectrodes (CFEs) were proposed to detect in situ cerebral AA with sensitivity, selectivity, and stability. Under differential pulse voltammetry scanning, the CFE/CNT-COOH/PEDOT gave a ratiometric, electrochemically responsive signal. The internal standard peak at -310 mV was from the reversible peak of O2 reduction and the deprotonation and protonation of quinone groups, while AA was oxidized at -70 mV. In vivo experimental results indicated that the cerebral AA level gradually increased with the ischemic time increasing in different middle cerebral artery occlusion (MCAO) model mice. This work implies that the increasing cerebral AA level may be highly related to the glutamate excitotoxicity and ROS-led cell apoptosis and paves a new way for further understanding the release and metabolic mechanisms of AA during ischemia reperfusion and IS.

COF-Coated Microelectrode for Space-Confined Electrochemical Sensing of Dopamine in Parkinson's Disease Model Mouse Brain

Parkinson's disease (PD) is a progressive neurodegenerative disorder causing the loss of dopaminergic neurons in the substantia nigra and the drastic depletion of dopamine (DA) in the striatum; thus, DA can act as a marker for PD diagnosis and therapeutic evaluation. However, detecting DA in the brain is not easy because of its low concentration and difficulty in sampling. In this work, we report the fabrication of a covalent organic framework (COF)-modified carbon fiber microelectrode (cCFE) that enables the real-time detection of DA in the mouse brain thanks to the outstanding antibiofouling and antichemical fouling ability, excellent analytical selectivity, and sensitivity offered by the COF modification. In particular, the COF can inhibit the polymerization of DA on the electrode (namely, chemical fouling) by spatially confining the molecular conformation and electrochemical oxidation of DA. The cCFE can stably and continuously work in the mouse brain to detect DA and monitor the variation of its concentration. Furthermore, it was combined with levodopa administration to devise a closed-loop feedback mode for PD diagnosis and therapy, in which the cCFE real-time monitors the concentration of DA in the PD model mouse brain to instruct the dose and injection time of levodopa, allowing a customized medication to improve therapeutic efficacy and meanwhile avoid adverse side effects. This work demonstrates the fascinating properties of a COF in fabricating electrochemical sensors for in vivo bioanalysis. We believe that the COF with structural tunability and diversity will offer enormous promise for selective detection of neurotransmitters in the brain.

Therapeutic Potential of Nanomedicine in Management of Alzheimer's Disease and Glioma

Neoplasm (Glioblastoma) and Alzheimer's disease (AD) comprise two of the most chronic psychological ailments. Glioblastoma is one of the aggressive and prevalent malignant diseases characterized by rapid growth and invasion resulting from cell migration and degradation of extracellular matrix. While the latter is characterized by extracellular plaques of amyloid and intracellular tangles of tau proteins. Both possess a high degree of resistance to treatment owing to the restricted transport of corresponding drugs to the brain protected by the blood-brain barrier (BBB). Development of optimized therapies using advanced technologies is a great need of today. One such approach is the designing of nanoparticles (NPs) to facilitate the drug delivery at the target site. The present article elaborates the advances in nanomedicines in treatment of both AD as well as Gliomas. The intention of this review is to provide an overview of different types of NPs with their physical properties emphasizing their importance in traversing the BBB and hitting the target site. Further, we discuss the therapeutic applications of these NPs along with their specific targets. Multiple overlapping factors with a common pathway in development of AD and Glioblastoma are discussed in details that will assist the readers in developing the conceptual approach to target the NP for an aging population in the given circumstances with limitations of currently designed NPs, and the challenges to meet and the future perspectives.

Nickel-Cobalt Salen Organometallic Complexes Encapsulated in Mesoporous NaA Nanozeolite for Electrocatalytic Quantification of Ascorbic Acid and Paracetamol

Goal of current study was fabrication of novel voltammetric nanosensor for the synchronize quantification of ascorbic acid (AA) and paracetamol (PAR) by nickel-cobalt salen complexes encapsulated in the supercages of NaA nanozeolite modified carbon paste electrode (NiCoSalenA/CPE). For this purpose, NiCoSalenA nanocomposite was firstly prepared and characterized by various methods. Also, cyclic voltammetry (CV), choronoamperometry (CHA) and differential pulse voltammetry (DPV) were utilized to evaluate performance of the modified electrodes. The effects of pH and modifier amount were considered on the electrochemical oxidation of AA and PAR on the surface of NiCoSalenA/CPE. Results from this method indicated that pH of 3.0 in phosphate buffer solution (0.1 M) and 15 wt% of NiCoSalenA nanocomposite in the modified CPE results in the maximum current density. The oxidation signals of AA and PAR was amplified affectively at NiCoSalenA/CPE versus unmodified CPE. The limit of detection (LOD) and linear dynamic range (LDR) for the simultaneous measurement of them were founds to be 0.82 and 2.73-80.70 for AA and 0.51 µM, 1.71-32.50 and 32.50-137.60 µM for PAR, respectively. The catalytic rate constants (kcat) were attained to be 3.73 × 107 and 1.27 × 107 cm3 mol-1 s-1 for AA and PAR via CHA method, respectively. Also, the amounts of diffusion coefficient (D) were found to be 1.12 × 10-7 and 1.92 × 10-7 cm2 s-1 for AA and PAR, respectively. The average value of electron transfer rate constant between NiCoSalenA/CPE and PAR was obtained to be 0.016 s-1. The NiCoSalen-A/CPE displayed worthy stability, repeatability and extraordinary recovery for simultaneous measurements of AA and PAR. Application of offered sensor was confirmed by quantifying concentrations of AA and PAR in human serum solution as a real sample.

A portable electrochemical microsensor for in-site measurement of dissolved oxygen and hydrogen sulfide in natural water

Dissolved oxygen (O₂) and hydrogen sulfide (H₂S) are two important indicators of water quality, their levels are of intimate dependence and varying over time. It is of great significance to monitoring of dissolved O₂ and H₂S simultaneously in natural water, yet has not been reported because of lack of effective approaches. In this work, a portable electrochemical microsensor was developed for simultaneously quantifying dissolved O₂ and H₂S. Here, Pd@Ni nanoparticles (NPs) were self-assembled onto the microelectrode by MXene titanium carbide (Ti₃C₂T_x), which were of responsibility towards O₂ and H₂S detection within single electrochemical reduction process. On this regard, Pd NPs facilitated catalyzing the electrochemical reduction of O₂, while Ni NPs were employed as recognition element for H₂S detection. With the electrochemical reduction sweep, the initial application of a positive voltage rendered the Ni to be oxidized to be Ni ions, contributing to their following capture of surrounding S^2- to form nickel sulfide. Nickel sulfide with highly electrochemical activity were capable of generating detecting reduction current. In consequence, the as-designed microsensor can simultaneously determine O₂ concentrations ranging from 36 to 318 μM and H₂S levels ranging from 0.1 to 2.5 μM with high selectivity. Finally, the portable microsensor was successfully applied to simultaneous detection dissolved O₂ and H₂S in natural water in-site, the results of which were comparable to the classical methods.

A systematic study of nano-based fibrous systems: Diagnostic and therapeutic approaches for dementia control

Nano-based systems provide many advantages, including eluding gastrointestinal and first-pass metabolism of the drug and improving the potential advantage of reduced doses of drugs for an equal or better therapeutic effect compared to other parts of oral administration. Over the last few years, protein-based nanofibrous biomaterials have been used for better controlling dementia. PubMed, Scopus, and ISI Web of Science were consulted for available articles on nano-based fibrous systems for the treatment and diagnosis of dementia (up to October 2022). Of 725 articles that were identified and evaluated, only 19 were included. Eleven studies evaluated nanofibrous electrospun biomaterials for better dementia control. Among these, four investigated marker/biomarker detection for the early diagnosis of dementia. Two from four studies conducted hydrogel-based nanofibrous for Alzheimer's disease (AD) treatment. Additionally, four studies inspected stem cell (SC) transplantation on nano-based fibrous scaffolds for better treatment of dementia. Finally, two from the final four studies considered nano-based fibrous systems for the enhanced treatment of dementia. Our study concluded that nano-based fibrous platforms, exclusively peptide/protein-based nanofibrous scaffolds made from biomaterials, can be applied for dementia management by either diagnostic or therapeutic approaches specific in purpose-designed electrospun nanofibrous scaffolds.

Conductive Metal-Organic Framework Microelectrodes Regulated by Conjugated Molecular Wires for Monitoring of Dopamine in the Mouse Brain

Herein, we demonstrated a strategy to regulate the conductive metal-organic framework (MOF) surface, by the conjugated molecule wires for selective and sensitive determination of dopamine (DA) in the live brain. The MOFs were decorated at the carbon fiber electrode deposited by Au nanoleaves as the upper electric transducer to provide rich electrocatalytic sites for electron transfer of neurochemicals at the electrode surface, leading to greatly enhanced sensitivity for detection of neurochemicals. On the other hand, the conjugated molecular wire, 4-(thiophen-3-ylethynyl)-benzaldehyde (RP1), was synthesized and assembled as an underlying bridge to regulate the electrochemical processes at the MOF-based electrode, specifically decreasing the reaction Gibbs free energy of DA oxidation, thus selectively promoting the heterogeneous electron transfer of DA from the MOF layer to the electrode surface. Owing to the electrocatalytic activity for DA oxidation, the present microsensor exhibited high selectivity for real-time tracking of DA in a good linear relationship in the range of 0.004-0.4 μM with a detection limit of 1 nM. Eventually, this functionalized electrode was successfully applied for in vivo monitoring of DA in mouse brains with Parkinson's disease (PD) model. The results indicated that the levels of DA were obviously decreased in both acute and subacute PD models. Moreover, the level of DA strongly depended on the amount of uric acid (UA), a physiological antioxidant, which rose as the UA amount was lower than 200 mg kg^-1 but was downregulated again after treatment by a higher amount of UA.

Real-Time Monitoring of Neurotransmitters in the Brain of Living Animals

Neurotransmitters, as important chemical small molecules, perform the function of neural signal transmission from cell to cell. Excess concentrations of neurotransmitters are often closely associated with brain diseases, such as Alzheimer's disease, depression, schizophrenia, and Parkinson's disease. On the other hand, the release of neurotransmitters under the induced stimulation indicates the occurrence of reward-related behaviors, including food and drug addiction. Therefore, to understand the physiological and pathological functions of neurotransmitters, especially in complex environments of the living brain, it is urgent to develop effective tools to monitor their dynamics with high sensitivity and specificity. Over the past 30 years, significant advances in electrochemical sensors and optical probes have brought new possibilities for studying neurons and neural circuits by monitoring the changes in neurotransmitters. This Review focuses on the progress in the construction of sensors for in vivo analysis of neurotransmitters in the brain and summarizes current attempts to address key issues in the development of sensors with high selectivity, sensitivity, and stability. Combined with the latest advances in technologies and methods, several strategies for sensor construction are provided for recording chemical signal changes in the complex environment of the brain.

In Vivo Electrochemical Biosensors: Recent Advances in Molecular Design, Electrode Materials, and Electrochemical Devices

Electrochemical biosensors provide powerful tools for dissecting the dynamically changing neurochemical signals in the living brain, which contribute to the insight into the physiological and pathological processes of the brain, due to their high spatial and temporal resolutions. Recent advances in the integration of in vivo electrochemical sensors with cross-disciplinary advances have reinvigorated the development of in vivo sensors with even better performance. In this Review, we summarize the recent advances in molecular design, electrode materials, and electrochemical devices for in vivo electrochemical sensors from molecular to macroscopic dimensions, highlighting the methods to obtain high performance for fulfilling the requirements for determination in the complex brain through flexible and smart design of molecules, materials, and devices. Also, we look forward to the development of next-generation in vivo electrochemical biosensors.

A Review on Electrochemical Microsensors for Ascorbic Acid Detection: Clinical, Pharmaceutical, and Food Safety Applications

Nowadays, micro-sized sensors have become a hot topic in electroanalysis. Because of their excellent analytical features, microelectrodes are well-accepted tools for clinical, pharmaceutical, food safety, and environmental applications. In this brief review, we highlight the state-of-art electrochemical non-enzymatic microsensors for quantitative detection of ascorbic acid (also known as vitamin C). Ascorbic acid is a naturally occurring water-soluble organic compound with antioxidant properties and its quantitative determination in biological fluids, foods, cosmetics, etc., using electrochemical microsensors is of wide interest. Various electrochemical techniques have been applied to detect ascorbic acid with extremely high sensitivity, selectivity, reproducibility, and reliability, and apply to in vivo measurements. This review paper aims to give readers a clear view of advances in areas of electrode modification, successful strategies for signal amplification, and miniaturization techniques used in the electroanalytical devices for ascorbic acid. In conclusion, current challenges related to the microelectrodes design, and future perspectives are outlined.

A recent advancement on the applications of nanomaterials in electrochemical sensors and biosensors

Industrialization and globalization, both on an international and local scale, have caused large quantities of toxic chemicals to be released into the environment. Thus, developing an environmental pollutant sensor platform that is sensitive, reliable, and cost-effective is extremely important. In current years, considerable progress has been made in the expansion of electrochemical sensors and biosensors to monitor the environment using nanomaterials. A large number of emerging biomarkers are currently in existence in the biological fluids, clinical, pharmaceutical and bionanomaterial-based electrochemical biosensor platforms have drawn much attention. Electrochemical systems have been used to detect biomarkers rapidly, sensitively, and selectively using biomaterials such as biopolymers, nucleic acids, proteins etc. In this current review, several recent trends have been identified in the growth of electrochemical sensor platforms using nanotechnology such as carbon nanomaterials, metal oxide nanomaterials, metal nanoparticles, biomaterials and polymers. The integration strategies, applications, specific properties and future projections of nanostructured materials for emerging progressive sensor platforms are also observed. The objective of this review is to provide a comprehensive overview of nanoparticles in the field of electrochemical sensors and biosensors.

Real-Time Tracking of Electrical Signals and an Accurate Quantification of Chemical Signals with Long-Term Stability in the Live Brain

The development of in vivo analytical tools and methods for recording electrical signals and accurately quantifying chemical signals is a key issue for a comprehensive understanding of brain events. The electrophysiological microelectrode was invented to monitor electrical signals in free-moving brains. On the other hand, electrochemical assays with excellent spatiotemporal resolution provide an effect way to monitor chemical signals in vivo. Unfortunately, the in vivo electrochemical biosensors still have three limitations. First, many biological species such as reactive oxygen species (ROS) and neurotransmitters demonstrate large overpotentials at conventional electrodes. Thus, it is hard to convert the chemical/electrochemical signals of these molecules into electric signals. Second, the interfacial properties of the recognition molecules assembled onto the electrode surfaces have a great influence on the transmission of electric charge through the interface and the stability of the modified recognition molecules. Meanwhile, the surface of biosensors implanted in the brain is easily absorbed by many proteins present in the brain, resulting in the loss of signals. Finally, activities in the brain including neuron discharges and electrophysiological signals may be affected by electrochemical measurements due to the application of extra potentials and/or currents.This Account presents a deep view of the fundamental design principles and solutions in response to the above challenges for developing in vivo biosensors with high performance while meeting the growing requirements, including high selectivity, long-time stability, and simultaneously monitoring electrical and chemical signals. We aim to highlight the basic criteria based on a double-recognition strategy for the selective biosensing of ROS, H₂S, and H_nS through the rational design of specific recognition molecules followed by electrochemical oxidation or reduction. Recent developments in designing functionalized surfaces through a systematic investigation of self-assembly with Au-S bonds, Au-Se bonds, and Au≡C bonds for facilitating electrochemical properties as well as improving the stability are summarized. More importantly, this Account highlights the novel methodologies for simultaneously monitoring electrical and chemical signals ascribed to the dynamic changes in K⁺, Na⁺, and Ca²⁺ and pH values in vivo. Additionally, SERS-based photophysiological microarray probes have been developed for quantitatively tracking chemical changes in the live brain together with recording electrophysiological signals.The design principles and novel strategies presented in this Account can be extended to the real-time tracking of electrical signals and the accurate quantification of more chemical signals such as amino acids, neurotransmitters, and proteins to understand the brain events. The final part also outlines potential future directions in constructing high-density microarrays, eventually enabling the large-scale dynamic recording of the chemical expression of multineuronal signals across the whole brain. There is still room to develop a multifiber microarray which can be coupled with photometric methods to record chemical signals both inside and outside neurons in the live brains of freely moving animals to understand physiological processes and screen drugs.

Efficient Electrochemical Microsensor for In Vivo Monitoring of H2O2 in PD Mouse Brain: Rational Design and Synthesis of Recognition Molecules

Hydrogen peroxide (H₂O₂), one of the most stable and abundant reactive oxygen species (ROS), acting as a modulator of dopaminergic signaling, has been intimately implicated in Parkinson's disease, creating a critical need for the selective quantification of H₂O₂ in the living brain. Current natural or nanomimic enzyme-based electrochemical methods employed for the determination of H₂O₂ suffer from inadequate selectivity and stability, due to which the in vivo measurement of H₂O₂ in the living brain remains a challenge. Herein, a series of 5-(1,2-dithiolan-3-yl)-N-(4-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)phenyl)pentanamide (DBP) derivatives were designed by tuning the substitute groups and sites of a boric acid ester, which served as probes to specifically react with H₂O₂. Consequently, the reaction products, 5-(1,2-dithiolan-3-yl)-N-(4-hydroxyphen-yl)pentanamide (DHP) derivatives, converted the electrochemical signal from inactive into active. After systematically evaluating their performances, 5-(1,2-dithiolan-3-yl)-N-(3-chloro-4-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)phenyl)pentanamide (o-Cl-DBP) was finally identified as the optimized probe for H₂O₂ detection as it revealed the fastest reaction time, the largest current density, and the most negative potential. In addition, electrochemically oxidized graphene oxide (EOGO) was utilized to produce a stable inner reference. The designed electrochemical microsensor provided a ratiometric strategy for real-time tracking of H₂O₂ in a linear range of 0.5-600 μM with high selectivity and accuracy. Eventually, the efficient electrochemical microsensor was successfully applied to the measurement of H₂O₂ in Parkinson's disease (PD) mouse brain. The average levels of H₂O₂ in the cortex, striatum, and hippocampus in the normal mouse and PD mouse were systematically compared for the first time.

A ratiometric electrochemical microsensor for monitoring chloride ions in vivo

Chloride ion (Cl^-), the most common anion in animal brain, has been verified to play a vital role in maintaining normal physiological processes. Thus, development of a reliable platform to determine Cl^- is of great significance for brain research involving Cl^-. In this work, a ratiometric electrochemical microsensor (REM) for the in vivo measurement of cerebral Cl^- was designed. To prepare REM, uniform Ag nanoparticles (Ag NPs) with nano-level sizes were synthesized via an adsorption-reduction process, which served as selective recognition elements for Cl^- determination, while methylene blue (MB) was absorbed and acted as an inner reference unit to avoid the environmental interference of complicated brain systems. As a result, this developed REM exhibited high sensitivity and selectivity, as well as good stability, reproducibility and anti-biofouling. This reliable approach was established to monitor Cl^- in mouse brain.

Reconstituting electrical conduction in soft tissue: the path to replace the ablationist

Cardiac arrhythmias are a leading cause of morbidity and mortality in the developed world. A common mechanism underlying many of these arrhythmias is re-entry, which may occur when native conduction pathways are disrupted, often by myocardial infarction. Presently, re-entrant arrhythmias are most commonly treated with antiarrhythmic drugs and myocardial ablation, although both treatment methods are associated with adverse side effects and limited efficacy. In recent years, significant advancements in the field of biomaterials science have spurred increased interest in the development of novel therapies that enable restoration of native conduction in damaged or diseased myocardium. In this review, we assess the current landscape of materials-based approaches to eliminating re-entrant arrhythmias. These approaches potentially pave the way for the eventual replacement of myocardial ablation as a preferred therapy for such pathologies.

Facile Electrochemical Microbiosensor Based on In Situ Self-Assembly of Ag Nanoparticles Coated on Ti3C2Tx for In Vivo Measurements of Chloride Ions in the PD Mouse Brain

Chloride ion (Cl^-), one of the most important anions in the brain, has been confirmed to participate in the pathological process of Parkinson's disease (PD). As such, the development of a reliable method for in vivo measurements of Cl^- is extremely appealing, especially for understanding the pathogenesis of PD. We herein designed a facile electrochemical microbiosensor (ECMB), based on in situ self-assembly of Ag nanoparticles (Ag NPs) coated on Ti₃C₂T_x. The uniform nanosized Ag NPs were reduced by Ti₃C₂T_x by a simple dipping process, endowing the ECMB with excellent specificity toward Cl^- detection and remarkably reproducible preparation process. Meanwhile, electro-oxidized graphene oxide was introduced as an inner reference, thus avoiding the environmental interference of the complicated brain systems to increase the determination accuracy. An extensive in vitro study revealed that the proposed ECMB would be a robust candidate for real-time monitoring of Cl^- in the PD mouse brain with high selectivity, accuracy, and reproducibility. Moreover, the availability and reliability toward in vivo Cl^- monitoring of the designed ECMB were well confirmed by comparing with the standard Volhard's method. Finally, by virtue of the successful employment of the developed detecting platform in the in vivo measurement of Cl^- in the PD mouse brain, systematic analysis and comparison of the average levels of Cl^- in the three regions including cortex, striatum, and hippocampus of brains from normal and PD model mice have been achieved.

Brain neurochemical monitoring

Brain neurochemical monitoring aims to provide continuous and accurate measurements of brain biomarkers. It has enabled significant advances in neuroscience for application in clinical diagnostics, treatment, and prevention of brain diseases. Microfabricated electrochemical and optical spectroscopy sensing technologies have been developed for precise monitoring of brain neurochemicals. Here, a comprehensive review on the progress of sensing technologies developed for brain neurochemical monitoring is presented. The review provides a summary of the widely measured clinically relevant neurochemicals and commonly adopted recognition technologies. Recent advances in sampling, electrochemistry, and optical spectroscopy for brain neurochemical monitoring are highlighted and their application are discussed. Existing gaps in current technologies and future directions to design industry standard brain neurochemical sensing devices for clinical applications are addressed.

Nonenzymatic Electrochemical Sensor with Ratiometric Signal Output for Selective Determination of Superoxide Anion in Rat Brain

There is still an urgent need to develop reliable analytical methods of O₂^•- in vivo for deeply elucidating the roles of O₂^•- playing in the brain. Herein, a nonenzymatic electrochemical sensor with ratiometric signal output was developed for an in vivo analysis of O₂^•- in the rat brain. Diphenylphosphonate-2-naphthol ester (ND) was designed and synthesized as a specific recognition molecule for the selective determination of O₂^•-. An anodic peak ascribed to the oxidation of 2-naphthol was generated via the nucleophilic substitution between ND and O₂^•- and was increased with the increasing concentration of O₂^•-. Meanwhile, the inner reference of methylene blue (MB) was co-assembled at the electrode surface to enhance the determination accuracy of O₂^•-. The anodic peak current ratio between 2-naphthol and MB exhibited a good linear relationship with the concentration of O₂^•- from 2 to 200 μM. Because of the stable molecule character of ND and its specific reaction with O₂^•-, the developed electrochemical sensor demonstrated excellent selectivity toward various potential interferences in the brain and good stability even after storage for 7 days. Accordingly, the present electrochemical sensor with high selectivity, high stability, and high accuracy was successfully exploited in monitoring the levels of O₂^•- in the rat brain and that of the diabetic model followed by cerebral ischemia.

Nanomaterials in Electrochemical Sensing Area: Applications and Challenges in Food Analysis

Recently, nanomaterials have received increasing attention due to their unique physical and chemical properties, which make them of considerable interest for applications in many fields, such as biotechnology, optics, electronics, and catalysis. The development of nanomaterials has proven fundamental for the development of smart electrochemical sensors to be used in different application fields such, as biomedical, environmental, and food analysis. In fact, they showed high performances in terms of sensitivity and selectivity. In this report, we present a survey of the application of different nanomaterials and nanocomposites with tailored morphological properties as sensing platforms for food analysis. Particular attention has been devoted to the sensors developed with nanomaterials such as carbon-based nanomaterials, metallic nanomaterials, and related nanocomposites. Finally, several examples of sensors for the detection of some analytes present in food and beverages, such as some hydroxycinnamic acids (caffeic acid, chlorogenic acid, and rosmarinic acid), caffeine (CAF), ascorbic acid (AA), and nitrite are reported and evidenced.

Dual-Response Ratiometric Electrochemical Microsensor for Effective Simultaneous Monitoring of Hypochlorous Acid and Ascorbic Acid in Human Body Fluids

Redox homeostasis between hypochlorous acid (HClO/ClO^-) and ascorbic acid (AA) significantly impacts many physiological and pathological processes. Herein, we report a new electrochemical sensor for the simultaneous determination of HClO and AA in body fluids. We first coated a carbon fiber microelectrode (CFME) with a three-dimensional nanocomposite consisting of graphene oxide (GO) and carbon nanotubes (CNTs) to fabricate the CFME/GO-CNT electrode. After the electrochemical reduction of GO (ERGO), we integrated a latent 1-(3,7-bis(dimethylamino)-10H-phenothiazin-10-yl)-2-methylpropan-1-one (MBS) electrochemical molecular recognition probe to monitor HClO and employed anthraquinone (AQ) as an internal reference. The compact CFME/ERGO-CNT/AQ + MBS sensor enabled the accurate and simultaneous measurement of HClO and AA with excellent selectivity and sensitivity. Measurements were highly reproducible, and the sensor was stable and exceptionally biocompatible. We successfully detected changes in the redox cycles of HClO and AA in human body fluids. This sensor is a significant advance for the investigation of reactions involved in cellular redox regulation. More importantly, we have devised a strategy for the design and construction of ratiometric electrochemical biosensors for the simultaneous determination of various bioactive species.

Highly dispersive Pt-Pd nanoparticles on graphene oxide sheathed carbon fiber microelectrodes for electrochemical detection of H2O2 released from living cells

We report a facile strategy for the synthesis of surfactant-free, small and highly dispersive Pt-Pd nanoparticles on graphene oxide (Pt-Pd NPs/GO) by an electroless deposition method, which is sheathed on carbon fiber microelectrodes (CFMs) as an electrochemical sensing platform for highly sensitive and selective detection of hydrogen peroxide (H₂O₂) released from the living cells. GO serves as the reducing agent and stabilizer for electroless deposition of Pd NPs on the surface of GO owing to its low work function (4.38 eV) and highly conjugated electronic structure. The obtained Pd NPs/GO have a relatively high work function (4.64 eV), and thereby could be used as stabilizer for synthesis of surfactant-free, small and highly dispersive Pt-Pd NPs/GO by chemical reduction of K₂PtCl₄. The obtained Pt-Pd NPs have a uniform size of 4.0 ± 0.6 nm on the surface of GO. Moreover, the Pt-Pd NPs/GO sheathed CFMs exhibit an excellent electrocatalytic activity for the reduction of H₂O₂ with a low detection limit of 0.3 μM and good selectivity. These good properties enable the modified microelectrode to detect the H₂O₂ released from living cells.

Precision medicine, bioanalytics and nanomaterials: toward a new generation of personalized portable diagnostics

The customization of disease treatment focused on genetic, environmental and lifestyle factors of individual patients, including tailored medical decisions and treatments, is identified as precision medicine. This approach involves the combination of various aspects such as the collection and processing of a large amount of data, the selection of optimized and personalized drug dosage for each patient and the development of selective and reliable analytical tools for the monitoring of clinical, genetic and environmental parameters. In this context, miniaturized, compact and ultrasensitive bioanalytical devices play a crucial role for achieving the goals of personalized medicine. In this review, the latest analytical technologies suitable for providing portable and easy-to-use diagnostic tools in clinical settings will be discussed, highlighting new opportunities arising from nanotechnologies, offering peculiar perspectives and opportunities for precision medicine.

Facile Ratiometric Electrochemical Sensor for In Vivo/Online Repetitive Measurements of Cerebral Ascorbic Acid in Brain Microdiaysate

The in vivo monitoring of ascorbic acid (AA) following physiological and pathological events is of great importance because AA plays a critical role in brain functions. The conventional electrochemical sensors (ECSs) usually suffered from poor selectivity and sluggish electron transfer kinetics for cerebral AA oxidation. The exploitation of ECSs adapt to the electrochemical detection (ECD)-microdialysis system, here we reported a facile ratiometric electrochemical sensor (RECS) for in vivo/online repetitive measurements of cerebral AA in brain microdiaysate. The sensor were constructed by careful electrodeposition of graphene oxide (GO) onto glassy carbon (GC) electrodes. Methylene blue (MB) was electrostatically adsorbed onto the GO surface as a built-in reference to achieve ratiometric detection of AA. The subsequent proper electroreduction treatment was able to readily facilitate the oxidation of AA at a relatively negative potential (-100 mV) and the oxidation of MB at separated potential (-428 mV). The in vitro experiments demonstrated that the RECS exhibited high sensitivity (detection limit: 10 nM), selectivity, and stability toward AA determination, enabling the in vivo/online repetitive measurement of cerebral AA in brain microdiaysate with high reliability. As a result, the designed RECS was successfully applied in the ECD-microdialysis system to in vivo/online repetitive monitoring the dynamic change of cerebral AA in the progress of the global cerebral ischemia/reperfusion events. More, the microinjection of endogenous AA and AA oxidase (AAOx) verified the reliability of the proposed RECS for in vivo/online repetitive cerebral AA detection. This proposed sensor filled the gap that no rational electrochemical sensor has been developed for the ECD-microdialysis system since its creation by the Mao group in 2005, which provided a reliable and effective method for brain chemistry research.

A homogeneous photoelectrochemical hydrogen sulfide sensor based on the electronic transfer mediated by tetrasulfophthalocyanine

A homogeneous photoelectrochemical sensor for H₂S detection based on the electronic transfer mediated by [Fe(iii)PcS₄]⁺was developed with an un-modified photoelectrode.

A cobalt corrole/carbon nanotube enables simultaneous electrochemical monitoring of oxygen and ascorbic acid in the rat brain

It is of interest to in vivo monitor the co-dynamics of different substances. However, the tracking of multiple species is still challenging. In this work, we demonstrate an in vivo electrochemical method by using multi-potential step amperometry to in vivo detect ascorbic acid (AA) and oxygen (O2) simultaneously. In order to achieve good selectivity and high sensitivity for both AA and O2, we design a cobalt corrole [Co(tpfc)(py)2] (tpfc = 5,10,15-tris(penta-fluorophenyl) corrole, py = pyridine, denoted as Co-TPFC) and carbon nanotube nanocomposite to modify a carbon fiber microelectrode (Co-TPFC/MWNT/CFE). This Co-TPFC/MWNT/CFE exhibits excellent electrocatalytic properties towards the reduction of O2 preceding a 4e process and facilitates the oxidation of AA at low potential in the physiological environment. Based on this, we realize simultaneous detection of AA and O2 using two-potential steps (one cathodic (-0.2 V) and the other anodic (+0.05 V)) with 1 second step time. Both in vitro and in vivo experiments proved the feasibility of this method. This demonstrated strategy is useful for us to understand various physiological and pathological processes associated with O2 and AA co-dynamics, and also provides an idea for detecting multiple substances simultaneously.

Rational Design of Specific Recognition Molecules for Simultaneously Monitoring of Endogenous Polysulfide and Hydrogen Sulfide in the Mouse Brain

A biosensor was created for the simultaneous monitoring of endogenous H₂ S_n and H₂ S in mouse brains and exploring their roles in activation of the TRPA1 channel under two types of brain disease models: ischemia and Alzheimer's disease (AD). Based on DFT calculations and electrochemical measurements, two probes, 3,4-bis((2-fluoro-5-nitrobenzoyl)oxy)-benzoic acid (M_PS-1 ) and N-(4-(2,5-dinitrophenoxy) phenyl)-5-(1, 2-dithiolan-3-yl)pentanamide (M_HS-1 ), were synthesized for specific recognition of H₂ S_n and H₂ S. Through co-assembly of the two probes at the mesoporous gold film with good anti-biofouling ability and electrocatalytic activity, this microsensor showed high selectivity for H₂ S_n and H₂ S against potential biological interferences. The biosensor can simultaneously determine the concentration of H₂ S_n from 0.2 to 50 μm, as well as that of H₂ S from 0.2 to 40 μm. The expression of TRPA1 protein positively correlated with levels of H₂ S_n under both ischemia and AD.

Cost-effective synthesis of three-dimensional nitrogen-doped nanostructured carbons with hierarchical architectures from the biomass of sea-tangle for the amperometric determination of ascorbic acid

In this work, the three-dimensional nitrogen-doped nanostructured carbons with hierarchical architectures (3D-NNCsHAs) with high density of defective sites, high surface area and pluralities of pore size distributions was prepared through the pyrolysis of sea-tangle (Laminaria japonica), an inexpensive, eco-friendly and abundant precursor. Benefitting from their structural uniqueness, a selective and sensitive ascorbic acid (AA) sensor based on 3D-NNCsHAs was developed. Compared to the glassy carbon electrode (GCE) and the carbon nanotubes modified GCE (CNTs/GCE), the 3D-NNCsHAs modified GCE (3D-NNCsHAs/GCE) presents higher performance towards the electrocatalysis and detection of AA, such as lower detection limit (1 μM), wider linear range (10-4410 μM) and lower electrooxidation peak potential (-0.02 V vs. Ag/AgCl). In addition, 3D-NNCsHAs/GCE also exhibits high anti-interference and anti-fouling abilities for AA detection. Particularly, the fabricated 3D-NNCsHAs/GCE is able to determine AA in real samples and the results acquired are satisfactory. Therefore, the 3D-NNCsHAs can be considered as a kind of novel electrode nanomaterial for the fabrication of selective and sensitive AA sensor for the extensive practical applications ranging from food analysis, to pharmaceutical industry and clinical test.