Conductive Polymer-Coated Carbon Nanotubes To Construct Stretchable and Transparent Electrochemical Sensors

Microelectrochemical Sensor Reveals Tunneling Nanotube-Mediated Intercellular Communication of Endothelial Mechanotransduction

The intercellular communication of mechanotransduction has a significant impact on various cellular processes. Tunneling nanotubes (TNTs) have been documented to possess the capability of transmitting mechanical stimulation between cells, thereby triggering an influx of Ca2+ ions. However, the related kinetic information on the TNT-mediated intercellular mechanotransduction communication is still poorly explored. Herein, we developed a classic and sensitive Pt-functionalized carbon fiber microelectrochemical sensor (Pt/CF) to study the intercellular communication of endothelial mechanotransduction through TNTs. The experimental findings demonstrate that the transmission of mechanical stimulation from stimulated human umbilical vein endothelial cells (HUVECs) to recipient HUVECs connected by TNTs occurred quickly (<100 ms) and effectively promoted nitric oxide (NO) production in the recipient HUVECs. The kinetic profile of NO release exhibited remarkable similarity in stimulated and recipient HUVECs. But the production of NO in the recipient cell is significantly attenuated (16.3%) compared to that in the stimulated cell, indicating a transfer efficiency of approximately 16.3% for TNTs. This study unveils insights into the TNT-mediated intercellular communication of mechanotransduction.

Real-Time Quantification of Nanoplastics-Induced Oxidative Stress in Stretching Alveolar Cells

Nanoplastics from air pollutants can be directly inhaled into the alveoli in the lungs and further enter blood circulation, and numerous studies have revealed the close relation between internalized nanoplastics with many physiological disorders via intracellular oxidative stress. However, the dynamic process of nanoplastics-induced oxidative stress in lung cells under breath-mimicked conditions is still unclear, due to the lack of methods that can reproduce the mechanical stretching of the alveolar and simultaneously monitor the oxidative stress response. Here, we describe a biomimetic platform by culturing alveoli epithelial cells on a stretchable electrochemical sensor and integrating them into a microfluidic device. This allows reproducing the respiration of alveoli by cyclic stretching of the alveoli epithelial cells and monitoring the nanoplastics-induced oxidative stress by the built-in sensor. By this device, we prove that cyclic stretches can greatly enhance the cellular uptake of nanoplastics with the dependencies of strain amplitude. Importantly, oxidative stress evoked by internalized nanoplastics can be quantitatively monitored in real time. This work will promote the deep understanding about the cytotoxicity of inhaled nanoplastics in the pulmonary mechanical microenvironment.

Flexible and Stretchable Electrochemical Sensors for Biological Monitoring

The rise of flexible and stretchable electronics has revolutionized biosensor techniques for probing biological systems. Particularly, flexible and stretchable electrochemical sensors (FSECSs) enable the in situ quantification of numerous biochemical molecules in different biological entities owing to their exceptional sensitivity, fast response, and easy miniaturization. Over the past decade, the fabrication and application of FSECSs have significantly progressed. This review highlights key developments in electrode fabrication and FSECSs functionalization. It delves into the electrochemical sensing of various biomarkers, including metabolites, electrolytes, signaling molecules, and neurotransmitters from biological systems, encompassing the outer epidermis, tissues/organs in vitro and in vivo, and living cells. Finally, considering electrode preparation and biological applications, current challenges and future opportunities for FSECSs are discussed.

Sensitive electrochemical measurement of nitric oxide released from living cells based on dealloyed PtBi alloy nanoparticles

Nitric oxide (NO), as a vital signaling molecule related to different physiological and pathological processes in living systems, is closely associated with cancer and cardiovascular disease. However, the detection of NO in real-time remains a difficulty. Here, PtBi alloy nanoparticles (NPs) were synthesized, dealloyed, and then fabricated to NP-based electrodes for the electrochemical detection of NO. Transmission electron microscopy (TEM), small-angle X-ray scattering (SAXS), and nitrogen physical adsorption/desorption show that dealloyed PtBi alloy nanoparticles (dPtBi NPs) have a porous nanostructure. Electrochemical impedance spectroscopy and cyclic voltammetry results exhibit that the dPtBi NP electrode possesses unique electrocatalytic features such as low charge transfer resistance and large electrochemically active surface area, which lead to its excellent NO electrochemical sensing performance. Owing to the higher density of catalytical active sites formed PtBi bimetallic interface, the dPtBi NP electrode displays superior electrocatalytic activity toward the oxidation of NO with a peak potential at 0.74 V vs. SCE. The dPtBi NP electrode shows a wide dynamic range (0.09-31.5 μM) and a low detection limit of 1 nM (3σ/k) as well as high sensitivity (130 and 36.5 μA μM^-1 cm^-2). Moreover, the developed dPtBi NP-based electrochemical sensor also exhibited good reproducibility (RSD 5.7%) and repeatability (RSD 3.4%). The electrochemical sensor was successfully used for the sensitive detection of NO produced by live cells. This study indicates a highly effective approach for regulating the composition and nanostructures of metal alloy nanomaterials, which might provide new technical insights for developing high-performance NO-sensitive systems, and have important implications in enabling real-time detection of NO produced by live cells.

Rational Design of Cu-Doped Tetrahedron of Spinel Oxide for High-Performance Nitric Oxide Electrochemical Sensor

The real-time detection of nitric oxide (NO) in living cells is essential to reveal its physiological processes. However, the popular electrochemical detection strategy is limited to the utilization of noble metals. The development of new detection candidates without noble metal species still maintaining excellent catalytic performance has become a big challenge. Herein, we propose a spinel oxide doped with heteroatom-Cu-doped Co₃O₄ (Cu-Co₃O₄) for the sensitive and selective detection of NO release from the living cells. The material is strategically designed with Cu occupying the tetrahedral (T_d) center of Co₃O₄ through the formation of a Cu-O bond. The introduced Cu regulates the local coordination environment and optimizes the electronic structure of Co₃O₄, hybridizing with the N 2p orbital to enhance charge transfer. The Cu_Td site can well inhibit the current response to nitrite (NO₂^-), resulting in a high improvement in the electrochemical oxidation of NO. The selectivity of Cu-Co₃O₄ can be markedly improved by the pore size of the molecular sieve and the negative charge on the surface. The rapid transmission of electrons is due to the fact that Cu-Co₃O₄ can be uniformly and densely in situ grown on Ti foil. The rationally designed Cu-Co₃O₄ sensor displays excellent catalytic activity toward NO oxidation with a low limit of detection of 2.0 nM (S/N = 3) and high sensitivity of 1.9 μA nM^-1 cm^-2 in cell culture medium. The Cu-Co₃O₄ sensor also shows good biocompatibility to monitor the real-time NO release from living cells (human umbilical vein endothelial cells: HUVECs; macrophage: RAW 264.7 cells). It was found that a remarkable response to NO was obtained in different living cells when stimulated by l-arginine (l-Arg). Moreover, the developed biosensor could be used for real-time monitoring of NO released from macrophages polarized to a M1/M2 phenotype. This cheap and convenient doping strategy shows universality and can be used for sensor design of other Cu-doped transition metal materials. The Cu-Co₃O₄ sensor presents an excellent example through the design of proper materials to implement unique sensing requirements and sheds light on the promising strategy for electrochemical sensor fabrication.

Stretchable Oxygen-Tolerant Sensor Based on a Single-Atom Fe-N4 Electrocatalyst for Observing the Role of Oxidative Stress in Hypertension

Oxidative stress and related oxidative damage have a causal relation with the pathogenesis of hypertension. Therefore, it is crucial to determine the mechanism of oxidative stress in hypertension by applying mechanical forces on cells to simulate hypertension while monitoring the release of reactive oxygen species (ROS) from cells under an oxidative stress environment. However, cellular level research has rarely been explored because monitoring the ROS released by cells is still challenging owing to the interference of O₂. In this study, an Fe single-atom-site catalyst anchored on N-doped carbon-based materials (Fe SASC/N-C) was synthesized, which exhibits excellent electrocatalytic activity for the reduction of hydrogen peroxide (H₂O₂) at a peak potential of +0.1 V and can effectively avoid the interference of O₂. Furthermore, we constructed a flexible and stretchable electrochemical sensor based on the Fe SASC/N-C catalyst to study the release of cellular H₂O₂ under simulated hypoxic and hypertension conditions. Density functional theory calculations show that the highest transition state energy barrier from the oxygen reduction reaction (ORR), i.e., O₂ to H₂O, is 0.38 eV. In comparison, the H₂O₂ reduction reaction (HPRR) can be completed only by overcoming a lower energy barrier of 0.24 eV, endowing the HPRR to be more favorable on Fe SASC/N-C compared with the ORR. This study provided a reliable electrochemical platform for real-time investigation of H₂O₂-related underlying mechanisms of the hypertension process.

Stretchable Electrochemical Sensor Based on a Gold Nanowire and Carbon Nanotube Network for Real-Time Tracking Cell-Released H2S

Hydrogen sulfide (H₂S), as the third gas transporter in biological systems, plays a key role in the regulation of biological cells. Real-time detection of local H₂S concentration in vivo is an important and challenging task. Herein, we explored a novel and facile strategy to develop a flexible and transparent H₂S sensor based on gold nanowire (AuNW) and carbon nanotube (CNT) films embedded in poly(dimethylsiloxane) (PDMS) (AuNWs/CNTs/PDMS). Taking the advantage of the sandwich-like nanostructured network of AuNWs/CNTs, the prepared electrochemical sensing platform exhibited desirable electrocatalytic activity toward H₂S oxidation with a wide linear range (5 nM to 24.9 μM) and a low dete ction limit (3 nM). Furthermore, thanks to the good biocompatibility and flexibility of the sensor, HeLa cells can be cultured directly on the electrode, allowing real-time monitoring of H₂S released from cells under a stretched state. This work provides a versatile strategy for the construction of stretchable electrochemical sensors, which has potential applications in the study of H₂S-related signal mechanotransduction and pathological processes.

Transparent and self-healing elastomers for reconfigurable 3D materials

Transparent soft materials have been widely used in applications ranging from packaging to flexible displays, wearable devices, and optical lenses. Nevertheless, soft materials are susceptible to mechanical damages, leading to functional failure and premature disposal. Herein, we introduce a transparent self-healing elastomer that is able to repair the polymer network via exchange reactions of dynamic disulfide bonds. Due to its self-healing ability, the mechanical properties of the elastomer can be recovered, as well as its transparency after multiple cycles of abrasion and healing. The self-healing polymer is fabricated into three-dimensional (3D) structures by folding or modular origami assembly of planar self-healing polymer sheets. The 3D polymer objects are employed as storage containers of solid and liquid substances, reactors for photopolymerization, and cuvettes for optical measurements (exhibiting superior properties to those of commercial cuvettes). These dynamic polymers show outstanding mechanical, optical, and recycling properties that could potentially be further adapted in adaptive smart packaging, reconfigurable materials, optical devices, and recycling of elastomers. This article is protected by copyright. All rights reserved.

Flexible Sensors Based on Conductive Polymers

Conductive polymers have attracted wide attention since their discovery due to their unique properties such as good electrical conductivity, thermal and chemical stability, and low cost. With different possibilities of preparation and deposition on surfaces, they present unique and tunable structures. Because of the ease of incorporating different elements to form composite materials, conductive polymers have been widely used in a plethora of applications. Their inherent mechanical tolerance limit makes them ideal for flexible devices, such as electrodes for batteries, artificial muscles, organic electronics, and sensors. As the demand for the next generation of (wearable) personal and flexible sensing devices is increasing, this review aims to discuss and summarize the recent manufacturing advances made on flexible electrochemical sensors.

Lab on a body for biomedical electrochemical sensing applications: The next generation of microfluidic devices

This chapter highlights applications of microfluidic devices toward on-body biosensors. The emerging application of microfluidics to on-body bioanalysis is a new strategy to establish systems for the continuous, real-time, and on-site determination of informative markers present in biofluids, such as sweat, interstitial fluid, blood, saliva, and tear. Electrochemical sensors are attractive to integrate with such microfluidics due to the possibility to be miniaturized. Moreover, on-body microfluidics coupled with bioelectronics enable smart integration with modern information and communication technology. This chapter discusses requirements and several challenges when developing on-body microfluidics such as difficulties in manipulating small sample volumes while maintaining mechanical flexibility, power-consumption efficiency, and simplicity of total automated systems. We describe key components, e.g., microchannels, microvalves, and electrochemical detectors, used in microfluidics. We also introduce representatives of advanced lab-on-a-body microfluidics combined with electrochemical sensors for biomedical applications. The chapter ends with a discussion of the potential trends of research in this field and opportunities. On-body microfluidics as modern total analysis devices will continue to bring several fascinating opportunities to the field of biomedical and translational research applications.

Conducting Polymer-Reinforced Laser-Irradiated Graphene as a Heterostructured 3D Transducer for Flexible Skin Patch Biosensors

Flexible skin patch biosensors are promising for the noninvasive determination of physiological parameters in perspiration for fitness and health monitoring. However, various prerequisites need to be met for the development of such biosensors, including the creation of a flexible conductive platform, bending/contact stability, fast electrochemical kinetics, and immobilization of biomolecules. Here, we describe a conducting polymer-reinforced laser-irradiated graphene (LIG) network as a heterostructured three-dimensional (3D) transducer for flexible skin patch biosensors. LIG with a hierarchically interconnected graphene structure is geometrically patterned on polyimide via localized laser irradiation as a flexible conductive platform, which is then reinforced by poly(3,4-ethylenedioxythiophene) (PEDOT) as a conductive binder (PEDOT/LIG) with improved structural/contact stability and electrochemical kinetics. The interconnected pores of the reinforced PEDOT/LIG function as a 3D host matrix for high loading of "artificial" (Prussian blue, PB) and natural enzymes (lactate oxidase, LOx), forming a compact and heterostructured 3D transducer (LOx/PB-PEDOT/LIG) for lactate biosensing with excellent sensitivity (11.83 μA mM^-1). We demonstrated the fabrication of flexible skin patch biosensors comprising a custom-built integrated three-electrode system achieve amperometric detection of lactate in artificial sweat over a wide physiological linear range of 0-18 mM. The advantage of this facile and versatile transducer is further illustrated by the development of a folded 3D wristband lactate biosensor and a dual channel biosensors for simultaneous monitoring of lactate and glucose. This innovative design concept of a heterostructured transducer for flexible biosensors combined with a versatile fabrication approach could potentially drive the development of new wearable and skin-mountable biosensors for monitoring various physiological parameters in biofluids for noninvasive fitness and health management.

A novel multifunctional platform based on ITO/APTES/ErGO/AuNPs for long-term cell culture and real-time biomolecule monitoring

Integrating long-term cell culture with real-time electrochemical monitoring is a promising strategy for future studies of physiological and pathological processes. However, great challenges still remain in fabricating such a platform with satisfactory electrochemical performance as well as desirable biocompatibility. Herein, we proposed a novel multifunctional platform based on gold nanoparticles/electrochemically reduced graphene oxide/3-aminopropyl-triethoxysilane modified indium tin oxide plate (ITO/APTES/ErGO/AuNPs). The unique biological and electrical properties of AuNPs and ErGO endow the platform with superior electrocatalytic activity and desirable biocompatibility. As a proof of concept, the present platform showed satisfactory electrochemical performance for sensitive and selective detection of hydrogen peroxide (H₂O₂) with a sensitivity about 0.25 μA μM^-1 cm^-2 and a detection limit of 0.38 μM in a linear range of 0.5-1461 μM. And the principle of catalytic reduction was clarified through density functional calculations (DFT). Furthermore, cells grew on the platform exhibited excellent proliferation ability and considerable viability after a long-term cultivation. Based on those desirable performances, in-situ and real-time monitoring of endogenously produced H₂O₂ released from cancer cells cultured on the platform has been successfully realized, which will be of great significance in pathophysiology research.

Stretchable and Transparent Electrochemical Sensor Based on Nanostructured Au on Carbon Nanotube Networks for Real-Time Analysis of H2O2 Release from Cells

Various electrochemical biosensors have been developed for direct and real-time recording of biomolecules released from living cells. However, since these traditional electrodes are commonly rigid and nonflexible, in situ monitoring of biochemical signals while cell deformation occurs remains a great challenge. Herein, we report a facile approach for the development of a stretchable and transparent electrochemical cell-sensing platform based on Au nanostructures (nano-Au) and carbon nanotube (CNT) films embedded in PDMS (nano-Au/CNTs/PDMS). The sandwich-like nanostructured network of nano-Au/CNTs endows the sensor with excellent mechanical stability and electrochemical performance. The obtained nano-Au/CNTs/PDMS electrode displays desired performance for H₂O₂ detection with a wide linear range (20 nM-25.8 μM) and low detection limit (8 nM). Owing to good biocompatibility and flexibility, HeLa and human umbilical vein endothelial cells can be directly cultured on the electrode and real-time monitoring of H₂O₂ release from cells under their stretched state was realized. The proposed strategy demonstrated in this work provides an effective way for design of stretchable sensors and more opportunities for sensing biomolecules from mechanically sensitive cells.

Multi-Walled Carbon Nanotubes-Based Sensors for Strain Sensing Applications

The use of multi-walled carbon nanotube (MWCNT)-based sensors for strain-strain applications is showcased in this paper. Extensive use of MWCNTs has been done for the fabrication and implementation of flexible sensors due to their enhanced electrical, mechanical, and thermal properties. These nanotubes have been deployed both in pure and composite forms for obtaining highly efficient sensors in terms of sensitivity, robustness, and longevity. Among the wide range of applications that MWCNTs have been exploited for, strain-sensing has been one of the most popular ones due to the high mechanical flexibility of these carbon allotropes. The MWCNT-based sensors have been able to deduce a broad spectrum of macro- and micro-scaled tensions through structural changes. This paper highlights some of the well-approved conjugations of MWCNTs with different kinds of polymers and other conductive nanomaterials to form the electrodes of the strain sensors. It also underlines some of the measures that can be taken in the future to improve the quality of these MWCNT-based sensors for strain-related applications.

Review on carbonaceous materials and metal composites in deformable electrodes for flexible lithium-ion batteries

With the rapid propagation of flexible electronic devices, flexible lithium-ion batteries (FLIBs) are emerging as the most promising energy supplier among all of the energy storage devices owing to their high energy and power densities with good cycling stability. As a key component of FLIBs, to date, researchers have tried to develop newly designed high-performance electrochemically and mechanically stable pliable electrodes. To synthesize better quality flexible electrodes, based on high conductivity and mechanical strength of carbonaceous materials and metals, several research studies have been conducted. Despite both materials-based electrodes demonstrating excellent electrochemical and mechanical performances in the laboratory experimental process, they cannot meet the expected demands of stable flexible electrodes with high energy density. After all, various significant issues associated with them need to be overcome, for instance, poor electrochemical performance, the rapid decay of the electrode architecture during deformation, and complicated as well as costly production processes thus limiting their expansive applications. Herein, the recent progression in the exploration of carbonaceous materials and metals based flexible electrode materials are summarized and discussed, with special focus on determining their relative electrochemical performance and structural stability based on recent advancement. Major factors for the future advancement of FLIBs in this field are also discussed.

Stretchable Electrochemical Sensors for Cell and Tissue Detection

Electrochemical sensing based on conventional rigid electrodes has great restrictions for characterizing biomolecules in deformed cells or soft tissues. The recent emergence of stretchable sensors allows electrodes to conformally contact to curved surfaces and perfectly comply with the deformation of living cells and tissues. This provides a powerful strategy to monitor biomolecules from mechanically deformed cells, tissues, and organisms in real time, and opens up new opportunities to explore the mechanotransduction process. In this minireview, we first summarize the fabrication of stretchable electrodes with emphasis on the nanomaterial-enabled strategies. We then describe representative applications of stretchable sensors in the real-time monitoring of mechanically sensitive cells and tissues. Finally, we present the future possibilities and challenges of stretchable electrochemical sensing in cell, tissue, and in vivo detection.

Stretchable Electrode Based on Au@Pt Nanotube Networks for Real-Time Monitoring of ROS Signaling in Endothelial Mechanotransduction

Vascular endothelial cells (ECs) are natively exposed to dynamic cyclic stretch and respond to it by the production of vasoactive molecules. Among them, reactive oxygen species (ROS) are closely implicated to the endothelial function and vascular homeostasis. However, the dynamic monitoring of ROS release during endothelial mechanotransduction remains a steep challenge. Herein, we developed a stretchable electrochemical sensor by decoration of uniform and ultrasmall platinum nanoparticles (Pt NPs) on gold nanotube (Au NT) networks (denoted as Au@Pt NTs). The orchestrated structure exhibited prominent electrocatalytic property toward the oxidation of hydrogen peroxide (H₂O₂) (as the most stable ROS) while maintaining excellent mechanical compliance of Au NT networks. Moreover, the favorable biocompatibility of Au NTs and Pt NPs promoted the adhesion and proliferation of ECs cultured thereon. These allowed in situ inducing ECs mechanotransduction and synchronously real-time monitoring of H₂O₂ release. Further investigation revealed that the production of H₂O₂ was positively correlated with the applied mechanical strains and could be boosted by other coexisting pathogenic factors. This indicates the great prospect of our proposed sensor in exploring ROS-related signaling for the deep understanding of cell mechanotransduction and vascular disorder.

Stretchable Electrochemical Biosensing Platform Based on Ni-MOF Composite/Au Nanoparticle-Coated Carbon Nanotubes for Real-Time Monitoring of Dopamine Released from Living Cells

Existing electrochemical biosensing platforms, using traditional rigid and unstretchable electrodes, cannot monitor the biological signaling molecules released by cells in a mechanically deformed state in real time. Here, a stretchable and flexible electrochemical sensor was developed based on nickel metal-organic framework composite/Au nanoparticle-coated carbon nanotubes (Ni-MOF composite/AuNPs/CNTs) for sensitive detection of dopamine (DA) released by C6 living cells in real time. A Ni-MOF composite was obtained by introducing Ni, NiO, and a carbon frame onto the surface of two-dimensional (2D) Ni-MOF nanosheets using an efficient one-step calcination method. The hybrid of Ni-MOF composite/AuNPs/CNTs that deposited on the poly(dimethylsiloxane) (PDMS) film endowed the sensor with excellent electrochemical performance with a wide linear range of 50 nM to 15 μM and a high sensitivity of 1250 mA/(cm² M) and also provided the sensor with desirable stability against mechanical deformation. Furthermore, the stretchable electrode also displayed good cellular compatibility while C6 living cells can be cultured and proliferated on it with strong adhesion. Then, the DA released by C6 living cells with chemical induction in both natural and stretched states was monitored using our stretchable and flexible electrochemical sensor in real time. This indicates that our new design of flexible Ni-MOF composite/AuNPs/CNTs/PDMS (NACP) film electrodes provides more opportunities for the detection of chemical signals released from cells and soft living organisms even under mechanically deformed states.

Effect of surface properties on the electrochemical response of cynarin by electro-synthesized functionalized-polybithiophene/MWCNT/GNP

Cynarin is one of the biologically active functional components present a wide range of pharmacological applications. Herein, we reported the fabrication and surface properties investigation of a new highly sensitive electrochemical sensor for the detection of cynarin. The electrochemical sensors were fabricated in several steps; the first being the synthesis of bi-thiophene derivatives-based monomers 3,3'-bithiophen (M1); 2-methoxy-5-carbaldehyde-[3,3'-bithiophene] (M2) and 2-((2-methoxy-[3,3'-bithiophen]-5-yl)methylene)malononitrile) (M3) followed by electrochemical polymerization on a glassy carbon electrode after which multi-walled carbon nanotube (MWCNT) and gold nanoparticles (GNP's) were electrodeposited layer-by-layer on the polymer coating to obtain multilayer electrochemical sensors. The morphological properties of the formed polymers were evaluated using SEM analysis and the apparent contact angles to preview the changes in surface properties after the functionalization of monomers and therefore their effects on the detection of cynarin. Analytical parameters such as the accumulation time and pH of the PBS solution which influence the sensitivity of the electrochemical sensors were optimized. Under the optimal conditions the GCE/P3/MWCNT/GNP's showed a wide range of analyte concentrations (1 to 100 μM and 0.01 to 1 μM) and detection limit of 0.0095 using pulse differential voltammetry. In addition, the electrochemical sensors showed good reproducibility, stability and selectivity and they were used successfully for the determination of cynarin in real solutions.

Near-Linear Responsive and Wide-Range Pressure and Stretch Sensor Based on Hierarchical Graphene-Based Structures via Solvent-Free Preparation

Flexible and wearable electronics have huge potential applications in human motion detection, human-computer interaction, and context identification, which have promoted the rapid development of flexible sensors. So far the sensor manufacturing techniques are complex and require a large number of organic solvents, which are harmful not only to human health but also to the environment. Here, we propose a facile solvent-free preparation toward a flexible pressure and stretch sensor based on a hierarchical layer of graphene nanoplates. The resulting sensor exhibits many merits, including near-linear response, low strain detection limits to 0.1%, large strain gauge factor up to 36.2, and excellent cyclic stability withstanding more than 1000 cycles. Besides, the sensor has an extraordinary pressure range as large as 700 kPa. Compared to most of the reported graphene-based sensors, this work uses a completely environmental-friendly method that does not contain any organic solvents. Moreover, the sensor can practically realize the delicate detection of human body activity, speech recognition, and handwriting recognition, demonstrating a huge potential for wearable sensors.

Vertically-Aligned Multi-Walled Carbon Nano Tube Pillars with Various Diameters under Compression: Pristine and NbTiN Coated

In this paper, the compressive stress of pristine and coated vertically-aligned (VA) multi-walled (MW) carbon nanotube (CNT) pillars were investigated using flat-punch nano-indentation. VA-MWCNT pillars of various diameters (30-150 µm) grown by low-pressure chemical vapor deposition on silicon wafer. A conformal brittle coating of niobium-titanium-nitride with high superconductivity temperature was deposited on the VA-MWCNT pillars using atomic layer deposition. The coating together with the pillars could form a superconductive vertical interconnect. The indentation tests showed foam-like behavior of pristine CNTs and ceramic-like fracture of conformal coated CNTs. The compressive strength and the elastic modulus for pristine CNTs could be divided into three regimes of linear elastic, oscillatory plateau, and exponential densification. The elastic modulus of pristine CNTs increased for a smaller pillar diameter. The response of the coated VA-MWCNTs depended on the diffusion depth of the coating in the pillar and their elastic modulus increased with pillar diameter due to the higher sidewall area. Tuning the material properties by conformal coating on various diameter pillars enhanced the mechanical performance and the vertical interconnect access (via) reliability. The results could be useful for quantum computing applications that require high-density superconducting vertical interconnects and reliable operation at reduced temperatures.

Silsesquioxane-Polythiophene Hybrid Copolymer as an Efficient Modifier for Single-Walled Carbon Nanotubes

One silsesquioxane-polythiophene hybrid copolymer, with combined star-like structure and intramolecular heterogeneity, was synthesized and sufficiently characterized via various methods, including FTIR, NMR, and SEC measurements. According to the exploration and characterization results, it was much more efficient at modifying SWNTs than its linear analogs in aqueous solution. The hydrophobic silsesquioxane core and PEDOT chains could locally anchor to the surface of the nanotubes, while the soluble flexible copolymer chains extended into the solution and rigid conjugated chains provided some π-π stacking effect to enhance adhesive force with the conjugated structure of the carbon nanotube, imparting steric stabilization to nanotube dispersion. The noncovalent interaction with SWNTs and solubility in aqueous solution improved the electrochemical characteristics of the modified-SWNT composite and availed for the preparation of a flexible and transparent electroactive film. Accordingly, this kind of silsesquioxane-polythiophene hybrid copolymer will be forwarded to apply to the assembling of flexible optoelectronic devices.

Integrating Flexible Electrochemical Sensor into Microfluidic Chip for Simulating and Monitoring Vascular Mechanotransduction

As an interface between the blood flow and vessel wall, endothelial cells (ECs) are exposed to hemodynamic forces, and the biochemical molecules released from ECs-blood flow interaction are important determinants of vascular homeostasis. Versatile microfluidic chips have been designed to simulate the biological and physiological parameters of the human vascular system, but in situ and real-time monitoring of the mechanical force-triggered signals during vascular mechanotransduction still remains a significant challenge. Here, such challenge is fulfilled for the first time, by preparation of a flexible and stretchable electrochemical sensor and its incorporation into a microfluidic vascular chip. This allows simulating of in vivo physiological and biomechanical parameters of blood vessels, and simultaneously monitoring the mechanically induced biochemical signals in real time. Specifically, the cyclic circumferential stretch that is actually exerted on endothelium but is hard to reproduce in vitro is successfully recapitulated, and nitric oxide signals under normal blood pressure, as well as reactive oxygen species signals under hypertensive states, are well documented. Here, the first integration of a flexible electrochemical sensor into a microfluidic chip is reported, therefore paving a way to evaluate in vitro organs by built-in flexible sensors.

Highly stretchable potentiometric ion sensor based on surface strain redistributed fiber for sweat monitoring

Development of stretchable potentiometric ion sensors has the observable potential for wearable devices to continuously monitoring of electrolytes in body fluids. However, the mechanical mismatch between soft elastomeric substrate and ion-selective electrode components greatly hinders sensor's fabrication and its stretching stability for long-term use. Here, we propose a new strategy to construct a potentiometric ion sensor on a surface strain redistributed elastic fiber (SSRE-fiber) with both high stretchability and high sensing stability. The SSRE-fiber is designed with a unique unilateral bead structure, which significantly changes its surface strain distribution during deformation. Benefit from this platform, the active sensing materials with high Young's modulus fabricated on the unilateral bead region can keep unchanged during stretching (0-200%). Thus, the as-prepared potentiometric sensors (ion-selective electrode and polymer/inorganic salt membrane-coated reference electrode) can perform with stable functions ignoring the stretching of the fiber. This new SSRE-fiber platform paves a way for the design of highly stretchable and stable electrochemical sensor capable of integrating into textiles for wearable biochemical detection applications.

Recent Developments of Flexible and Stretchable Electrochemical Biosensors

The skyrocketing popularity of health monitoring has spurred increasing interest in wearable electrochemical biosensors. Compared with the traditionally rigid and bulky electrochemical biosensors, flexible and stretchable devices render a unique capability to conform to the complex, hierarchically textured surfaces of the human body. With a recognition element (e.g., enzymes, antibodies, nucleic acids, ions) to selectively react with the target analyte, wearable electrochemical biosensors can convert the types and concentrations of chemical changes in the body into electrical signals for easy readout. Initial exploration of wearable electrochemical biosensors integrates electrodes on textile and flexible thin-film substrate materials. A stretchable property is needed for the thin-film device to form an intimate contact with the textured skin surface and to deform with various natural skin motions. Thus, stretchable materials and structures have been exploited to ensure the effective function of a wearable electrochemical biosensor. In this mini-review, we summarize the recent development of flexible and stretchable electrochemical biosensors, including their principles, representative application scenarios (e.g., saliva, tear, sweat, and interstitial fluid), and materials and structures. While great strides have been made in the wearable electrochemical biosensors, challenges still exist, which represents a small fraction of opportunities for the future development of this burgeoning field.

Mechanical Distension Induces Serotonin Release from Intestine as Revealed by Stretchable Electrochemical Sensing

The role of endogenous serotonin (5-HT) in gastrointestinal motility is still highly controversial. Although electrochemical techniques allow for direct and real-time recording of biomolecules, the dynamic monitoring of 5-HT release from elastic and tubular intestine during motor reflexes remains a great challenge because of the specific peristalsis patterns and inevitable passivation of the sensing interface. A stretchable sensor with antifouling and decontamination properties was assembled from gold nanotubes, titanium dioxide nanoparticles, and carbon nanotubes. The sandwich-like structure endowed the sensor with satisfying mechanical stability and electrochemical performance, high resistance against physical adsorption, and superior efficiency in the photodegradation of biofouling molecules. Insertion of the sensor into the lumen of rat ileum (the last section of the small intestine) successfully mimics intestinal peristalsis, and simultaneous real-time monitoring of distension-evoked 5-HT release was possible for the first time. Our results unambiguously reveal that mechanical distension of the intestine induces endogenous 5-HT overflow, and 5-HT level is closely associated with the physiological or pathological states of the intestine.

A stretchable laminated GNRs/BNNSs nanocomposite with high electrical and thermal conductivity

The rapid development of modern electronics has accelerated the demand for stretchable components with high thermal management capability because increasing the power density and miniaturization of electronic devices generate greater heat. However, stretchable electronics with enhanced heat dissipation have been rarely reported. In this study, a stretchable laminated nanocomposite-based conductor with both robust electric conductivity and enhanced thermal management capability was fabricated. With the optimized GNRs and BNNS contents, this conductor exhibited a thermal conductivity enhancement of 266%, leading to a decrease in the working temperature from 57.4 °C to 29.2 °C. Even under 100% strain, the fluctuation of the equilibrium operational temperature was within 10%. Moreover, the conductor showed outstanding electric performance under 200% strain with an R/R₀ value of 1.46. Whether stretched and tested in a Moebius-belt shape or under hard-environmental conditions such as in seawater, crude oil, and even integrated in a wireless charging circuit, the significant reliability of this conductor was recorded. Thus, our results are promising to provide a practical approach for the fabrication of stretchable electronic devices working in high temperature environments associated with extreme thermal stresses and under extreme circumstances such as sea rescue operations and marine oil pollution remediation.

Integrated textile sensor patch for real-time and multiplex sweat analysis

Wearable sweat analysis devices for monitoring of multiple health-related biomarkers with high sensitivity are highly desired for noninvasive and real-time monitoring of human health. Here, we report a flexible sweat analysis patch based on a silk fabric-derived carbon textile for simultaneous detection of six health-related biomarkers. The intrinsically N-doped graphitic structure and the hierarchical woven, porous structure provided the carbon textile good electrical conductivity, rich active sites, and good water wettability for efficient electron transmission and abundant access to reactants, enabling it to serve as an excellent working electrode in electrochemical sensors. On the basis of the above, we fabricated a multiplex sweat analysis patch that is capable of simultaneous detection of glucose, lactate, ascorbic acid, uric acid, Na⁺, and K⁺. The integration of selective detectors with signal collection and transmission components in this device has enabled us to realize real-time analysis of sweat.

Gas-Permeable, Irritation-Free, Transparent Hydrogel Contact Lens Devices with Metal-Coated Nanofiber Mesh for Eye Interfacing

An electronic "smart" contact lens device with high gas permeability and optical transparency, as well as mechanical compliance and robustness, offers daily wear capability in eye interfacing and can have broad applications ranging from ocular diagnosis to augmented reality. Most existing contact lens electronics utilize gas-impermeable substrates, electronic components, and interfacial adhesion layers, which impedes them from applications requiring continuous daily wear. Here we report on the design and fabrication of an eye interfacing device with a commercial ocular contact lens as the substrate, metal-coated nanofiber mesh as the conductor, and in situ electrochemically deposited poly(3,4-ethylenedioxythiophene) (PEDOT) /poly(styrene sulfonate) (PSS) as the adhesion material. This hydrogel contact lens device shows high gas permeability, wettability, and level of hydration, in addition to excellent optical transparency, mechanical compliance, and robustness. Using a rabbit model, we found that the animals wearing these hydrogel contact lens devices continuously for 12 hours showed a level of corneal fluorescein staining comparable to those wearing pure hydrogel contact lenses for same period of time, with no obvious corneal abrasion or irritation, indicating their high level of safety for continuous daily wear. Finally, full-field electroretinogram (ERG) recordings on rabbits were carried out to demonstrate the functionality of this device. We believe that the strategy of integrating nanofiber mesh-based electronic components demonstrated here can offer a general platform for hydrogel electronics with the advantages of preserving the physiological and mechanical properties of the hydrogel, thus enabling seamless integration with biological tissues and providing various wearable or implantable sensors with improved biocompatibility for health monitoring or medical treatment.

Recent Advances in Transparent Electronics with Stretchable Forms

Advances in materials science and the desire for next-generation electronics have driven the development of stretchable and transparent electronics in the past decade. Novel applications, such as smart contact lenses and wearable sensors, have been introduced with stretchable and transparent form factors, requiring a deeper and wider exploration of materials and fabrication processes. In this regard, many research efforts have been dedicated to the development of mechanically stretchable, optically transparent materials and devices. Recent advances in stretchable and transparent electronics are discussed herein, with special emphasis on the development of stretchable and transparent materials, including substrates and electrodes. Several representative examples of applications enabled by stretchable and transparent electronics are presented, including sensors, smart contact lenses, heaters, and neural interfaces. The current challenges and opportunities for each type of stretchable and transparent electronics are also discussed.

Flexible Sensors—From Materials to Applications

Flexible sensors have the potential to be seamlessly applied to soft and irregularly shaped surfaces such as the human skin or textile fabrics. This benefits conformability dependant applications including smart tattoos, artificial skins and soft robotics. Consequently, materials and structures for innovative flexible sensors, as well as their integration into systems, continue to be in the spotlight of research. This review outlines the current state of flexible sensor technologies and the impact of material developments on this field. Special attention is given to strain, temperature, chemical, light and electropotential sensors, as well as their respective applications.

Hexagonal and Square Patterned Silver Nanowires/PEDOT:PSS Composite Grids by Screen Printing for Uniformly Transparent Heaters

Transparent conductive films with hexagonal and square patterns were fabricated on poly(ethylene terephthalate) (PET) substrates by screen printing technology utilizing a poly(3,4-ethylenedioxythiophene) poly(styrenesulfonate) (PEDOT:PSS) and silver nanowire (Ag NWs) composite ink. The printing parameters-mesh number, printing layer, mass ratio of PEDOT:PSS to Ag NWs and pattern shape-have a significant influence on the photoelectric properties of the composite films. The screen mesh with a mesh number of 200 possesses a suitable mesh size of 74 µm for printing clear and integrated grids with high transparency. With an increase in the printing layer and a decrease in the mass ratio of PEDOT:PSS to Ag NWs, the transmittance and resistance of the printed grids both decreased. When the printing layer is 1, the transmittance and resistance are 85.6% and 2.23 kΩ for the hexagonal grid and 77.3% and 8.78 kΩ for the square grid, indicating that the more compact arrangement of square grids reduces the transmittance, and the greater number of connections of the square grid increases the resistance. Therefore, it is believed that improved photoelectric properties of transparent electrodes could be obtained by designing a printing pattern with optimized printing parameters. Additionally, the Ag NWs/PEDOT:PSS composite films with hexagonal and square patterns exhibit high transparency and good uniformity, suggesting promising applications in large-area and uniform heaters.

Recent Overviews in Functional Polymer Composites for Biomedical Applications

Composite materials are considered as an essential part of our daily life due to their outstanding properties and diverse applications. Polymer composites are a widespread class of composites, characterized by low cost, facile processing methods, and varied applications ranging from daily-use issues to highly complicated electronics and advanced medical combinations. In this review, we focus on the most important fabrication techniques for bioapplied polymer composites such as electrospinning, melt-extrusion, solution mixing, and latex technology, as well as in situ methods. Additionally, significant and recent advances in biomedical applications are spotlighted, such as tissue engineering (including bone, blood vessels, oral tissues, and skin), dental resin-based composites, and wound dressing.

Fabrication of a Flexible and Stretchable Nanostructured Gold Electrode Using a Facile Ultraviolet-Irradiation Approach for the Detection of Nitric Oxide Released from Cells

We developed a simple and environmentally friendly ultraviolet (UV)-irradiation-assisted technique to fabricate a stretchable, nanostructured gold film as a flexible electrode for the detection of NO release. The flexible gold film endows the electrode with desirable electrochemical stability against mechanical deformation, including bending to different curvatures and bearing repeated bending circumstances (200 times). The flexible nanostructured gold electrodes can catalyze NO oxidation at 0.85 V (as opposed to Ag/AgCl) and detect NO within a wide linearity in the range of 10 nM to 1.295 μM. Its excellent NO-sensing ability and its stretchability together with its biocompatibility allows the electrode to electrochemically monitor NO release from mechanically sensitive HUVECs in both their unstretched and stretched states. This result paves the way for an effective and easily accessible platform for designing stretchable and flexible electrodes and opens more opportunities for sensing chemical-signal molecules released from cells or other biological samples during mechanical stimulation.

Wearable Wireless Tyrosinase Bandage and Microneedle Sensors: Toward Melanoma Screening

Wearable bendable bandage-based sensor and a minimally invasive microneedle biosensor are described toward rapid screening of skin melanoma. These wearable electrochemical sensors are capable of detecting the presence of the tyrosinase (TYR) enzyme cancer biomarker in the presence of its catechol substrate, immobilized on the transducer surface. In the presence of the surface TYR biomarker, the immobilized catechol is rapidly converted to benzoquinone that is detected amperometrically, with a current signal proportional to the TYR level. The flexible epidermal bandage sensor relies on printing stress-enduring inks which display good resiliency against mechanical deformations, whereas the hollow microneedle device is filled with catechol-coated carbon paste for assessing tissue TYR levels. The bandage sensor can thus be used directly on the skin whereas microneedle device can reach melanoma tissues under the skin. Both wearable sensors are interfaced to an ultralight flexible electronic board, which transmits data wirelessly to a mobile device. The analytical performance of the resulting bandage and microneedle sensing systems are evaluated using TYR-containing agarose phantom gel and porcine skin. The new integrated conformal portable sensing platforms hold considerable promise for decentralized melanoma screening, and can be extended to the screening of other key biomarkers in skin moles.