Polymer Dots for Photoelectrochemical Bioanalysis

Semiconducting polymer dots for multifunctional integrated nanomedicine carriers

The expansion applications of semiconducting polymer dots (Pdots) among optical nanomaterial field have long posed a challenge for researchers, promoting their intelligent application in multifunctional nano-imaging systems and integrated nanomedicine carriers for diagnosis and treatment. Despite notable progress, several inadequacies still persist in the field of Pdots, including the development of simplified near-infrared (NIR) optical nanoprobes, elucidation of their inherent biological behavior, and integration of information processing and nanotechnology into biomedical applications. This review aims to comprehensively elucidate the current status of Pdots as a classical nanophotonic material by discussing its advantages and limitations in terms of biocompatibility, adaptability to microenvironments in vivo, etc. Multifunctional integration and surface chemistry play crucial roles in realizing the intelligent application of Pdots. Information visualization based on their optical and physicochemical properties is pivotal for achieving detection, sensing, and labeling probes. Therefore, we have refined the underlying mechanisms and constructed multiple comprehensive original mechanism summaries to establish a benchmark. Additionally, we have explored the cross-linking interactions between Pdots and nanomedicine, potential yet complete biological metabolic pathways, future research directions, and innovative solutions for integrating diagnosis and treatment strategies. This review presents the possible expectations and valuable insights for advancing Pdots, specifically from chemical, medical, and photophysical practitioners' standpoints.

Carbon Nitride-Based Heterojunction Photoelectrodes with Modulable Charge-Transfer Pathways toward Selective Biosensing

Photoelectrochemical (PEC) sensing enables the rapid, accurate, and highly sensitive detection of biologically important chemicals. However, achieving high selectivity without external biological elements remains a challenge because the PEC reactions inherently have poor selectivity. Herein, we report a strategy to address this problem by regulating the charge-transfer pathways using polymeric carbon nitride (pCN)-based heterojunction photoelectrodes. Interestingly, because of redox reactions at different semiconductor/electrolyte interfaces with specific charge-transfer pathways, each analyte demonstrated a unique combination of photocurrent-change polarity. Based on this principle, a pCN-based PEC sensor for the highly selective sensing of ascorbic acid in serum against typical interferences, such as dopamine, glutathione, epinephrine, and citric acid was successfully developed. This study sheds light on a general PEC sensing strategy with high selectivity without biorecognition units by engineering charge-transfer pathways in heterojunctions on photoelectrodes.

Effect of perylene assembly shapes on photoelectrochemical properties and ultrasensitive biosensing behaviors toward dopamine

In this study, a photoelectrochemical (PEC) sensor based on perylene diimide derivatives (PDIs) was developed for the ultrasensitive quantification of dopamine (DA). PDIs were able to form self-assembled semiconductor nanostructures by strong π-π stacking, suitable for photoactive substances. Moreover, the shape of the PDI significantly affected the PEC properties of these nanostructures. The results showed that amino PDI with two-dimensional (2D) wrinkled layered nanostructures exhibited superior PEC properties relative to one-dimensional (1D) nanorods and fiber-based nanostructures (methyl and carboxyl PDIs). Based on these results, a mechanism for PEC sensor action was then proposed. The presence of 2D amino-PDI resulted in accelerated charge separation and transport. Furthermore, dopamine acted as effective electron donor to cause an increase in photocurrent. The as-obtained sensor was then used to detect small molecules like DA. A blue light optimized sensor at an applied potential of 0.7 V showed a detection limit of 1.67 nM with a wide linear range of 5 nM to 10 μM. On the other hand, the sensor presented acceptable reliability in determining DA in real samples. A recovery rate between 97.99 and 101.0% was obtained. Overall, controlling the morphology of semiconductors can influence PEC performance, which is a useful finding for the future development of PEC sensors.

Organic-Inorganic Hybrid Flower-Shaped Microspheres Applied in Photoelectrochemical Sensing

Organic-inorganic hybrid materials are rarely applied in photoelectrochemical (PEC) sensing because of the serious charge-carrier recombination in organic conjugated polymers. In this work, a series of poly(3,4-ethylenedioxythiophene) (PEDOT)/ZnIn2S4 hybrid flower-shaped microspheres were synthesized using ionic liquids (ILs) as the supporting electrolyte for EDOT electropolymerization and as the regulating reagent for controlling ZnIn2S4 growth, respectively. It was found that the hybrid material [HOEMIM]NTf2-PEDOT/[HOEMIM]BF4-ZnIn2S4 ([HOEMIM]+: 1-hydroxyethyl-3-methylimidazolium cation; NTf2-: bis(trifluoromethanesulfonyl)amide) was the optimal one, with a smooth, transparent, and continuous polymer film covering the uniform and ordered cross-linked nanosheet arrays. The hybrid material could produce a high anodic photocurrent, which was about 78 times as high as that produced by the [HOEMIM]BF4-ZnIn2S4. The enhancement effect should be the highest among all the organic-inorganic hybrid materials reported so far. This was related to its unique micromorphology structure, p-n heterojunction, and the coexisting ILs, which restrained the charge-carrier recombination in PEDOT and enhanced PEDOT sensitization to ZnIn2S4. Then, a carcinoembryonic antigen PEC immunosensor was constructed based on the photoanodic sensing platform, and it exhibited good performance. Furthermore, the [HOEMIM]BF4-ZnIn2S4 was treated with NaClO solution to create the [HOEMIM]NTf2-PEDOT/[HOEMIM]BF4-S-ZnwInxSyOz general platform for both photoanodic and photocathodic sensing. As a proof of concept, L-cysteine and dissolved oxygen were used as models for photoanodic and photocathodic sensing, respectively. The results demonstrated that the general PEC platform was quite competent. This work opens up a window for the design of organic-inorganic hybrid PEC materials and will promote the application of such hybrid materials in PEC biosensing.

Recent Advances of Nanostructured Materials for Photoelectrochemical Bioanalysis

Nowadays, the emerging photoelectrochemical (PEC) bioanalysis has drawn intensive interest due to its numerous merits. As one of its core elements, functional nanostructured materials play a crucial role during the construction of PEC biosensors, which can not only be employed as transducers but also act as signal probes. Although both chemical composition and morphology control of nanostructured materials contribute to the excellent analytical performance of PEC bioassay, surveys addressing nanostructures with different dimensionality have rarely been reported. In this review, according to classification based on dimensionality, zero-dimensional, one-dimensional, two-dimensional, and three-dimensional nanostructures used in PEC bioanalysis are evaluated, with an emphasis on the effect of morphology on the detection performances. Furthermore, using the illustration of recent works, related novel PEC biosensing patterns with promising applications are also discussed. Finally, the current challenges and some future perspectives in this field are addressed based on our opinions.

Innovative ratiometric optical strategy: Nonconjugated polymer dots based fluorescence-scattering dual signal output for sensing mercury ions

A new ratiometric platform was developed for sensing Hg²⁺, which combined fluorescence and scattering simultaneously. This ratiometric strategy reflected superiorities over conventional methods, since the two independent signals at irrelevant categories meet the requirements of sufficient wavelength separation, stimulation under one excitation, and collection on single instrument. Herein, nonconjugated polymer dots (N-PDs) were served as the recognition unit for Hg²⁺ with turn-off fluorescence and turn-on scattering. Additionally, two signal collection tactics were proposed to achieve fluorescence and scattering in a window: one was to record down-conversion fluorescence and second-order scattering spectra (FL@SOS), and the other was to gather the fluorescence excited by second-order diffraction light and first-order scattering (SODL-FL@FOS). This ratiometric sensor exhibited outstanding performance toward Hg²⁺ in the range of 0.1-50 μM with the detection limit of 27 nM. By contrast, the present proposal provided a more ingenious and scalable way to construct ratiometric sensor than traditional approach.

Ion-selective polymer dots for photoelectrochemical detection of potassium ions

Potassium-selective polymer dots (K-Pdots) containing potassium ionophores were for the first time used for photoelectrochemical (PEC) analysis and yielded sensitive and specific detection of potassium ions. The successful PEC analysis using ion-selective Pdots underscored the effectiveness of the strategy deployed and suggested the potential universality of this strategy for the detection of metal ions, which should advance the development of PEC sensors in ion analysis.

A one-step hydrothermal route to fabricate a ZnO nanorod/3D graphene aerogel-sensitized structure with enhanced photoelectrochemistry performance and self-powered photoelectrochemical biosensing of parathion-methyl

A facile one-pot hydrothermal method for fabricating ZnO/GAs was developed. And a novel self-powered PEC biosensor was constructed based on the ZnO/GAs with the amplification of thiocholine for the detection of parathion-methyl.

Functional polymers in photoelectrochemical biosensing

Photoelectrochemical (PEC) analysis is a detection technique that has gained a wide attention in sensing applications. PEC presents the advantages of high sensitivity, low background signal, simple equipment and easy miniaturization. In PEC detection, light is used as an excitation source while current or voltage is measured as the output detection signal. The ability to couple the PEC process with specific bioreceptors gives PEC biosensing a unique advantage of being both selective and sensitive. The growing interest in PEC bioanalysis has resulted in essential progress in its analytical performance and biodetection applications. Functional polymers have different applications in the development of novel PEC biosensing platforms. Recently, the interest in polymer-based photoactive materials has emerged as they are efficient and less toxic alternatives to certain kinds of inorganic semiconductors and sensitizers. Moreover, molecularly imprinted polymers are a class of synthetic bioreceptors that are increasingly used in PEC bioanalytics. In this review, we will provide an overview on functional polymer-based PEC biosensing approaches. Novel classes of polymers as photoactive materials are reviewed and selected applications are described. Furthermore, molecularly imprinted polymers in the development of smart and sensitive PEC bioanalytical strategies are discussed.

Platinum and Iridium Oxide Co-modified TiO2 Nanotubes Array Based Photoelectrochemical Sensors for Glutathione

Oriented TiO₂ nanotubes, which are fabricated by anodic oxidation method, are prospective in photoelectrochemical analysis and sensors. In this work, Pt and IrO₂ co-modified TiO₂ nanotubes array was prepared via a two-step deposition process involving the photoreductive deposition of Pt and chemical deposition of IrO₂ on the oriented TiO₂ nanotubes. Due to the improved separation of photo-generated electrons and holes, Pt-IrO₂ co-modified TiO₂ nanotubes presented significantly higher PEC activity than pure TiO₂ nanotubes or mono-modified TiO₂ nanotubes. The PEC sensitivity of Pt-IrO₂ co-modified TiO₂ nanotubes for glutathione was also monitored and good sensitivity was observed.

A Novel Multifunctional p-Type Semiconductor@MOFs Nanoporous Platform for Simultaneous Sensing and Photodegradation of Tetracycline

p-Type semiconductors enable new opportunities for the development of photocatalysts. Metal-organic frameworks (MOFs) could now be manufactured for a wide range of applications. The zeolitic imidazolate framework-8 (ZIF-8), in particular, shows important desirable properties like good stability and a high surface area. Considering the p-type semiconducting intrinsic catalytic performance of CuBi₂O₄ (CBO) and the unique porous nanostructure and stability of ZIF-8, in this paper, we innovatively propose and investigate a new p-type semiconductor@MOFs (CBO@ZIF-8) material. Moreover, we focus on its application as a novel dual-function platform for simultaneous detection and degradation. The experimental results reveal that the platform is well suited for absorption, degradation, and fluorescent detection of certain targets. Using the contaminant, antibiotic tetracycline, as an example, the platform confirms excellent fluorescence sensing performance and good photodegradation properties under visible light. These results could aid the future design and implementation of novel and more sophisticated multifunction p-type semiconductor@MOFs platforms. The presented strategy represents the early stages of a future, genuine, general, multifunction platform.

Three-dimensional CdS nanosheet-enwrapped carbon fiber framework: Towards split-type CuO-mediated photoelectrochemical immunoassay

This work reports a customized methodology for the fabrication of 3D CdS nanosheet (NS)-enwrapped carbon fiber framework (CFF) and its utilization for sensitive split-type CuO-mediated PEC immunoassay. Specifically, the 3D CdS NS-CFF was fabricated via a solvothermal process, while the sandwich immunocomplexing was allowed in a 96 well plate with CuO nanoparticles (NPs) as the signaling labels. The subsequent release of the Cu²⁺ ions was directed to interact with the CdS NS, generating trapping sites and thus inhibiting its photocurrent generation. In such a protocol, the 3D CdS NS-CFF photoelectrode could not only guarantee its sufficient contact with the Cu²⁺-containing solution but also supply plenty CdS surface for the Cu²⁺ ions. Because of the target-dependent release of the Cu²⁺ ions and its proper coupling with the 3D CdS NS-CFF photoelectrode, a sensitive split-type PEC immunoassay was achieved for the detection of brain natriuretic peptide (BNP). This proposed system exhibited good stability and selectivity, and its applicability for real sample analysis was also demonstrated via comparison with the commercial BNP enzyme-linked immunosorbent assay (ELISA) kit. We expect this work could stimulate more interest in the design and utilization of 3D photoelectrodes for novel PEC bioanalysis.

Affinity-Based Detection of Biomolecules Using Photo-Electrochemical Readout

Detection and quantification of biologically-relevant analytes using handheld platforms are important for point-of-care diagnostics, real-time health monitoring, and treatment monitoring. Among the various signal transduction methods used in portable biosensors, photoelectrochemcial (PEC) readout has emerged as a promising approach due to its low limit-of-detection and high sensitivity. For this readout method to be applicable to analyzing native samples, performance requirements beyond sensitivity such as specificity, stability, and ease of operation are critical. These performance requirements are governed by the properties of the photoactive materials and signal transduction mechanisms that are used in PEC biosensing. In this review, we categorize PEC biosensors into five areas based on their signal transduction strategy: (a) introduction of photoactive species, (b) generation of electron/hole donors, (c) use of steric hinderance, (d) in situ induction of light, and (e) resonance energy transfer. We discuss the combination of strengths and weaknesses that these signal transduction systems and their material building blocks offer by reviewing the recent progress in this area. Developing the appropriate PEC biosensor starts with defining the application case followed by choosing the materials and signal transduction strategies that meet the application-based specifications.

In situ chemical redox and functionalization of graphene oxide: toward new cathodic photoelectrochemical bioanalysis

This report outlines the first exploration of graphene oxide (GO) itself as a light harvesting material with an innovative in situ chemical redox and functionalization (CRF) strategy for versatile and high-throughput cathodic photoelectrochemical (PEC) bioanalysis.

2D-porphrinic covalent organic framework-based aptasensor with enhanced photoelectrochemical response for the detection of C-reactive protein

In this study, a novel photoelectrochemical (PEC) aptasensor based on two-dimensional (2D) porphyrinic covalent organic frameworks (p-COFs) for the label-free detection of C-reactive protein (CRP) is presented. The obtained p-COFs possess high conductivity and an improved stability due to strong and rigid covalent linkages. The introduction of p-COFs hinder the recombination of electrons and holes, decreasing their band gap (E_g), thereby which improved the photocurrent conversion efficiency. Compared with pure porphyrin, p-COFs exhibited enhanced photocurrent intensity. An amplified photocurrent conversion efficiency and enhanced photocurrent results from H₂O₂, which act as active molecules and electron donors. As an unprecedented application of COFs in PEC bioanalysis, the detection of CRP with a PEC aptasensor is presented. The assembly of a CRP aptamer on the surface of Ag nanoparticles hinders the electron transfer, resulting in the decrease of the photocurrent response. This PEC aptasensor exhibits good analytical performances such as a rapid response, high stability, wide linear range and excellent selectivity, making COFs promising candidates for PEC bioanalysis.

Organic Photo-Electrochemical Transistor-Based Biosensor: A Proof-of-Concept Study toward Highly Sensitive DNA Detection

Organic bioelectronics have shown promising applications for various sensing purposes due to their significant advantages in term of high flexibility, portability, easy fabrication, and biocompatibility. Here, a new type of organic device, organic photo-electrochemical transistor (OPECT), is reported, which is the combination of an organic electrochemical transistor and a photo-electrochemical gate electrode modified with CdS quantum dots (QDs). Thanks to the inherent amplification function of the transistor, the OPECT-based biosensor exhibits much higher sensitivity than that of a traditional biosensor. The sensing mechanism of the OPECT is attributed to the charge transfer between the photosensitive semiconductor CdS QDs and the gate electrode. In an OPECT-based DNA sensor, target DNA is labeled with Au nanoparticles (NPs) and captured on the gate electrode, which can influence the charge transfer on the gate caused by the exciton-plasmon interactions between CdS QDs and Au NPs. Consequently, a highly sensitive and selective DNA sensor with a detection limit of around 1 × 10^-15 m is realized. It is expected that OPECTs can be developed as a high-performance platform for numerous biological detections in the future.

Photoelectrochemical Stripping Analysis

Electrochemical stripping analysis (ECSA) is a promising method for metal ions detection. However, the low sensitivity and poor reproducibility limits its practical applications. The combination with other powerful detection techniques to address these concerns is highly desirable. Herein, the anodic stripping method and photoelectrochemical (PEC) technique are integrated into a new detection platform of PEC stripping analysis (PECSA) with bismuth vanadate (BiVO₄) as both optoelectronic material and an electrochemical enrichment candidate. The new PECSA strategy presents high sensitivity and excellent reproducibility; in addition, inherited from the ECSA, this strategy also offers new selectivity dimensions through the potential-dependent response and thus implements reproducible, sensitive, and selective detection of silver ion (Ag⁺) in real biological and environmental samples. The success of PECAS strategy shed light on the rational combination of various analysis techniques for versatile applications.

Triphenylamine flanked furan-diketopyrrolopyrrole for multi-imaging guided photothermal/photodynamic cancer therapy

The combination of photodynamic therapy (PDT) and photothermal therapy (PTT) is highly desired to improve the cancer phototherapeutic effect. However, most reported multicomponent therapeutic agents need complex preparation processes and must be excited by using multiple light sources. Herein, triphenylamine flanked furan-diketopyrrolopyrrole (FDPP-TPA) with a donor-acceptor-donor structure has been synthesized and used as a sole-component agent for fluorescence, photoacoustic and photothermal imaging guided photodynamic and photothermal synergistic therapy. FDPP-TPA nanoparticles (NPs) obtained by re-precipitation exhibit a high molar extinction coefficient (ε = 2.13 (±0.2) × 10⁴ M^-1 cm^-1), excellent photothermal conversion efficiency (η = 47%) and favorable singlet oxygen quantum yield (Φ_Δ(X) = 40%). In vitro, the half-maximal inhibitory concentration (IC₅₀) is 13 μg mL^-1 determined by cytotoxicity assay. And the apoptosis rate is 67.3% according to flow cytometry analysis. In vivo, the tumor can be completely ablated without recurrence, which suggests that FDPP-TPA NPs can generate considerable poisonous singlet oxygen and hyperthermia for tumor treatment.