Electrochemical Detection of Ultratrace (Picomolar) Levels of Hg2+ Using a Silver Nanoparticle-Modified Glassy Carbon Electrode

Electrochemical/fluorescent dual-mode aptasensor based on 3D porous AuNPs/MXene for detection of ultra-trace mercury (Hg2+)

In this work, the dual-mode aptasensor based on 3D porous AuNPs/MXene using "turn-on" electrochemical method and "turn-off" fluorescent strategy was fabricated. Here, 2D MXene was processed into 3D porous MXene by sacrificial polymethylmethacrylate (PMMA) spherical template. And the meteor hammer-like AuNPs which had good electrochemical properties and quenching effect on fluorescence was synthesized by single electrodeposition. Dual-signal labeled Nile Blue (NB) was in situ grafted to the Hg2+ aptamer ends of 3D porous AuNPs/MXene/GCE, and an efficient and sensitive signal interface was constructed to realize the sensitive detection of Hg2+. 3D porous AuNPs/MXene had the advantages of large specific surface area, excellent electron transmission performance and signal amplification. The experimental results indicated that this sensor exhibited high sensitivity to Hg2+ in both electrochemical and fluorescent sensing, with detection limits of 2.69 fM and 1.60 fM, respectively. Further, the dual-mode aptasensor can ensure the detection accuracy and target quantization. The dual-mode aptasensor has been successfully applied to the ultra-trace detection of Hg2+ in actual water samples, which shows the potential of aptamer sensor in detecting heavy metal ions in environmental monitoring.

A dual-sensing strategy for the early diagnosis of urinary tract infections via detecting biofilm cellulose using aromatic amino acid-capped Au and Ag nanoparticles

Currently, urinary tract infection (UTI) diagnosis focuses on planktonic cell detection rather than biofilm detection, but the facile identification of UPEC bacterial biofilms is crucial in UTI diagnosis as the biofilm formed by bacteria is the causative agent of recurrent and chronic UTIs. Therefore, in this work, we developed a simple, cost-effective, colorimetric, and electrochemical-based strategy for the detection of cellulose in urine. Cellulose, a biofilm matrix component, was detected using tyrosine-capped gold and silver nanoparticles through a visible colorimetric change with a decrease in the absorbance intensity and a decrease in current response in the case of cyclic voltammetry. The sensor displayed a linear detection range of 10-70 mg mL-1 for colorimetry and 10-300 μg mL-1 for cyclic voltammetry with a good selectivity of <2.8% and a recovery rate of 95-100% in real-time sample analysis. Moreover, the binding affinity of cellulose with tyrosine was investigated using molecular docking studies to validate the sensing mechanism. We anticipate that our work will aid clinicians in the implementation of rapid, cost-effective, and definitive diagnosis of UTIs.

Synthesis of hydroxyethylcellulose phthalate-modified silver nanoparticles and their multifunctional applications as an efficient antibacterial, photocatalytic and mercury-selective sensing agent

Water contamination by several aquatic pollutants such as dyes, heavy metal ions and microbes is a prevalent concern to health and environment. Thus, developing facile, economical, and eco-friendly strategies to tackle this problem have become paramount. Hence, this study reports the synthesis of hydroxyethylcellulose phthalate-capped silver nanoparticles (HEC-PA@AgNPs) using a simple sunlight-assisted route. The multifunctional applications of the synthesized particles as an efficient nanoprobe for the selective sensing of Hg2+ as well as their photocatalytic and antimicrobial activities were demonstrated. HEC-PA@AgNPs were systematically characterized by various advanced analytical techniques such as FTIR, UV-Vis spectroscopy, X-ray diffraction (XRD), zeta potential (ZP) and dynamic light scattering (DLS). The successful functionalization of AgNPs with HEC-PA was manifested using FTIR. SEM and XRD revealed the formation of spherical AgNPs with a face centered cubic structure and a crystallite size of 14 nm. The particles demonstrated a hydrodynamic size of 40 nm with a good colloidal stability as evidenced from the ZP value of -35 mV, suggesting the effective role of the negatively charged HEC-PA capping agent in stabilizing the NPs. HEC-PA@AgNPs exhibited fast naked-eye colorimetric detection, high selectivity, and sensitivity to Hg2+ in spiked real water samples over a wide range of pH (3-9) and temperatures (298-328 K), achieving a detection limit of 119 nM. The presence of other diverse metal ions didn't affect the specificity of the particles toward Hg ions. Further, the sensing mechanism is based on a characteristic redox reaction between Hg2+ and AgNPs. Further, HEC-PA@AgNPs showcased a more noxious antimicrobial activity to gram-positive bacteria (B. subtilis and S. aureus) than gram-negative bacteria (E. coli). Besides, AgNPs exhibited high photocatalytic potential under sunlight irradiation with a degradation efficiency of 79 % for methylene blue dye in only 80 min following pseudo-1st order kinetics with a rate constant of 0.019 min-1. The photocatalyst exhibited good reusability after five recycling runs. These results render our approach promising multifunctional analytical probe for environmental and biomedical applications.

Cascade signal amplification using Hg2+-induced oxidation of silver nanoparticles and cation exchange reaction for ICP-MS bioassay

Combining the Hg2+-induced oxidization of silver nanoparticles with the cation exchange reaction between Ag+ and CuS nanoparticles for cascade signal amplification, a sensitive, universal and label-free ICP-MS bioassay for nucleic acids and proteins was developed. By replacing the loop sequence of the T-Hg-T hairpin structure with specific sequences or aptamers to different biomarkers, it has great promise for the early detection of biomarkers potentially for diagnosis of cancerous diseases.

A highly selective Hg2+ colorimetric sensor and antimicrobial agent based on green synthesized silver nanoparticles using Equisetum diffusum extract

Plasmonic nanoparticles such as Ag have gained great interest in the biomedical domain and chemical analysis due to their unique optical properties. Herein, we report a simple, cost-effective, and highly selective colorimetric sensor of mercury(ii) based on E. diffusum (horsetail) extract-functionalized Ag nanoparticles (ED-AgNPs). The ED-AgNPs were synthesized by exploiting the coordination of Ag+ with the various functional groups of ED extract under sunlight exposure for only tens of seconds. ED-AgNPs (63 nm) were characterized using various techniques such as UV-vis, FTIR, DLS, SEM and EDX. FTIR spectra suggested the successful encapsulation of the AgNPs surface with ED extract and XRD confirmed its crystalline nature. This ED-AgNPs colorimetric sensor revealed remarkable selectivity towards Hg2+ in aqueous solution among other transition metal ions through a redox reaction mechanism. Besides, the sensor exhibited high sensitivity with rapid response and a detection limit of 70 nM. The sensor demonstrated feasibility for Hg(ii) detection in spiked tap and river water samples. In addition, the synthesized ED-AgNPs revealed enhanced antimicrobial activity with higher efficacy against the Gram-positive bacterium (L. monocytogenes with an inhibition zone of 18 mm) than the Gram-negative bacterium (E. coli with an inhibition zone of 10 mm). The simplicity and adaptability of this colorimetric sensor render it a promising candidate for on-site and point-of-care detection of heavy metal ions in diverse conditions.

Development and Analytical Evaluation of a Point-of-Care Electrochemical Biosensor for Rapid and Accurate SARS-CoV-2 Detection

The COVID-19 pandemic has underscored the critical need for rapid and accurate screening and diagnostic methods for potential respiratory viruses. Existing COVID-19 diagnostic approaches face limitations either in terms of turnaround time or accuracy. In this study, we present an electrochemical biosensor that offers nearly instantaneous and precise SARS-CoV-2 detection, suitable for point-of-care and environmental monitoring applications. The biosensor employs a stapled hACE-2 N-terminal alpha helix peptide to functionalize an in situ grown polypyrrole conductive polymer on a nitrocellulose membrane backbone through a chemical process. We assessed the biosensor's analytical performance using heat-inactivated omicron and delta variants of the SARS-CoV-2 virus in artificial saliva (AS) and nasal swab (NS) samples diluted in a strong ionic solution, as well as clinical specimens with known Ct values. Virus identification was achieved through electrochemical impedance spectroscopy (EIS) and frequency analyses. The assay demonstrated a limit of detection (LoD) of 40 TCID50/mL, with 95% sensitivity and 100% specificity. Notably, the biosensor exhibited no cross-reactivity when tested against the influenza virus. The entire testing process using the biosensor takes less than a minute. In summary, our biosensor exhibits promising potential in the battle against pandemic respiratory viruses, offering a platform for the development of rapid, compact, portable, and point-of-care devices capable of multiplexing various viruses. The biosensor has the capacity to significantly bolster our readiness and response to future viral outbreaks.

Electrochemical Determination of 17-β-Estradiol Using a Glassy Carbon Electrode Modified with α-Fe2O3 Nanoparticles Supported on Carbon Nanotubes

In this study, a novel electrochemical assay for determining 17-β-estradiol (E2) was proposed. The approach involves modifying a glassy carbon electrode (GCE) with a nanocomposite consisting of α-Fe2O3 nanoparticles supported on carbon nanotubes (CNTs)-denoted as α-Fe2O3-CNT/GCE. The synthesis of the α-Fe2O3-CNT nanocomposite was achieved through a simple and cost-effective hydrothermal process. Morphological and chemical characterization were conducted using scanning electron microscopy (SEM), Raman spectroscopy, and energy-dispersive X-ray spectroscopy (EDX). The presence of the α-Fe2O3-CNT film on the GCE surface resulted in an enhanced electrochemical response to E2, preventing electrode surface fouling and mitigating the decrease in peak current intensity during E2 oxidation. These outcomes substantiate the rationale behind the GCE modification. After the optimization of experimental conditions, E2 was determined by the square wave voltammetry technique using 0.1 mol L-1 KCl solution (pH = 7.0) with 20% ethanol as a supporting electrolyte. A linear concentration range of 5.0-100.0 nmol L-1 and a low limit of detection of 4.4 nmol L-1 were obtained. The electroanalytical method using α-Fe2O3-CNT/GCE was applied for E2 determination in pharmaceutical, lake water, and synthetic urine samples. The obtained results were attested by recovery tests and by high-performance liquid chromatography as a comparative technique at a 95% confidence level. Thus, the developed electrochemical sensor is simple and fast to obtain, presents high accuracy, and is viable for determining E2 in routine analysis.

Colorimetric method transforms into highly sensitive homogeneous voltammetric sensing strategy for mercury ion based on mercury-stimulated Ti3C2Tx MXene nanoribbons@gold nanozyme activity

Nanozymes were emerged as the next generation of enzyme-mimics which exhibit great applications in various fields, but there is rarely report in the electrochemical detection of heavy metal ions. In this work, Ti₃C₂T_x MXene nanoribbons@gold (Ti₃C₂T_x MNR@Au) nanohybrid was prepared firstly via a simple self-reduction process and its nanozyme activity was studied. The results showed the peroxidase-like activity of bare Ti₃C₂T_x MNR@Au is extremely weak, while in the presence of Hg²⁺, the related nanozyme activity is stimulated and improved remarkably, which can easily catalyze oxidation of several colorless substrates (e.g., o-phenylenediamine) to form colored products. Interestingly, the product of o-phenylenediamine exhibits a strong reduction current which is considerably sensitive to the Hg²⁺ concentration. Based on this phenomenon, an innovative and highly sensitive homogeneous voltammetric (HVC) sensing strategy was then proposed to detect Hg²⁺ via transforming the colorimetric method into electrochemistry since it can exhibit several unique advantages (e.g., rapid responsiveness, high sensitivity and quantificational). Compared to the conventional electrochemical sensing methods for Hg²⁺, the designed HVC strategy can avoid the modification processes of electrode coupled with enhanced sensing performances. Therefore, we expect the as-proposed nanozyme-based HVC sensing strategy provides a new development direction for detecting Hg²⁺ and other heavy metals.

The Role of Silver Nanoparticles in Electrochemical Sensors for Aquatic Environmental Analysis

With rapidly increasing environmental pollution, there is an urgent need for the development of fast, low-cost, and effective sensing devices for the detection of various organic and inorganic substances. Silver nanoparticles (AgNPs) are well known for their superior optoelectronic and physicochemical properties, and have, therefore, attracted a great deal of interest in the sensor arena. The introduction of AgNPs onto the surface of two-dimensional (2D) structures, incorporation into conductive polymers, or within three-dimensional (3D) nanohybrid architectures is a common strategy to fabricate novel platforms with improved chemical and physical properties for analyte sensing. In the first section of this review, the main wet chemical reduction approaches for the successful synthesis of functional AgNPs for electrochemical sensing applications are discussed. Then, a brief section on the sensing principles of voltammetric and amperometric sensors is given. The current utilization of silver nanoparticles and silver-based composite nanomaterials for the fabrication of voltammetric and amperometric sensors as novel platforms for the detection of environmental pollutants in water matrices is summarized. Finally, the current challenges and future directions for the nanosilver-based electrochemical sensing of environmental pollutants are outlined.

Sensing of mercury ion using light induced aqueous leaf extract mediated green synthesized silver nanoparticles of Cestrum nocturnum L

In this study, a simple, one-pot, and eco-friendly biosynthesis of silver nanoparticles (AgNPs) was accomplished with the use of aqueous leaves extract of Cestrum nocturnum L.(AECN). Different techniques like ultraviolet-visible (UV-Vis) spectrophotometry, Fourier transform infrared (FTIR), X-ray diffraction (XRD), transmission electron microscopy (TEM), and scanning area electron diffraction were used to investigate the optical, operational, and physical properties of the green synthesized AECN-AgNPs.The AECN-AgNPs were further used for the detection of Hg²⁺ by UV-Vis and electrochemical methods. The disintegration of the AECN-AgNPs solution caused the formation of an Ag-Hg amalgam, which caused discoloration of the solution. Sensing performance for a variety of metals such as Na⁺, K⁺, Mg²⁺, Ca²⁺, Ni²⁺, Cu ²⁺, Fe³⁺, Zn²⁺, Co²⁺, Cd²⁺, Pb²⁺, As³⁺, and Mn²⁺ at 10-mM concentrations was measured in order to determine the selectivity of the sensor towards the Hg²⁺. For the electrochemical determination of 2 + Hg²⁺ , AECN-AgNPs were immobilized on a glassy carbon (GC) electrode, and the resulting modified electrode (GC/AECN-AgNPs) was characterized by cyclic voltammetry. This phenomenon is advantageously used for the sensitive determination of trace level Hg²⁺. GC/AECN-AgNPs demonstrated a linear calibration range of 100 nM to 10 μM and a limit of detection of 21 nM for Hg²⁺ determination.

Green synthesis of curcumin-silver nanoparticle and its modified electrode assisted amperometric sensor for the determination of paracetamol

Contamination of paracetamol, a primary analgesic was wide spread in the water system that affects the eco-system. High-dosage of paracetamol to humans cause organ damages and showed adverse effect. It is important to monitor the paracetamol concentration in environmental and human samples periodically. Conventional methods associated with chromatography is found to be high-cost, time consuming and requires high-end instrumentation, Herein, we investigated the role of curcumin during bio-synthesis of silver nanoparticles. The curcumin functionalized silver nanoparticles were further chemically modifying on the electrode surface and the resulting modified electrode was applied for electrocatalytic oxidation of paracetamol. The experimental finding proved that the modified electrode is capable of sensing paracetamol by applying oxidation potential 0.4 V. Both the synthesised material and modified electrode surface were characterized for its physic-chemical properties using spectroscopy and microscopy techniques. The HR-TEM, FESEM and AFM results showed that the distribution of nanoparticle with the size range from 25 to 70 nm and the UV-Vis and Raman spectrophotometer characterization confirms the coordination between SNP and curcumin. Under optimized condition, in 0.1 M NH₄Cl (pH 7) at the scan rate of 50 mVs^-1. The modified electrode enhanced the sensitivity towards the detection of paracetamol in trace level. The modified electrode is capable of sensing paracetamol in a linear range between 0.59 × 10^-6 and 342.1 × 10^-6 M, with LOD of 0.29 μM, and linear regression equation of y = 0.092x+502.6 with a correlation coefficient of R² = 0.996.

Recent Advances in Electrochemical Biosensors for the Detection of Salmonellosis: Current Prospective and Challenges

Salmonellosis is a major cause of foodborne infections, caused by Salmonella, posing a major health risk. It possesses the ability to infiltrate the food supply chain at any point throughout the manufacturing, distribution, processing or quality control process. Salmonella infection has increased severely and requires effective and efficient methods for early monitoring and detection. Traditional methods, such as real-time polymerase chain reaction and culture plate, consume a lot of time and are labor-intensive. Therefore, new quick detection methods for on-field applications are urgently needed. Biosensors provide consumer-friendly approaches for quick on-field diagnoses. In the last few years, there has been a surge in research into the creation of reliable and advanced electrochemical sensors for the detection of Salmonella strains in food samples. Electrochemical sensors provide extensive accuracy and reproducible results. Herein, we present a comprehensive overview of electrochemical sensors for the detection of Salmonella by focusing on various mechanisms of electrochemical transducer. Further, we explain new-generation biosensors (microfluidics, CRISPR- and IOT-based) for point-of care applications. This review also highlights the limitations of developing biosensors in Salmonella detection and future possibilities.

Recent developments in voltammetric and amperometric sensors for cysteine detection

This review article aims to provide an overview of the recent advances in the voltammetric and amperometric sensing of cysteine (Cys). The introduction summarizes the important role of Cys as an essential amino acid, techniques for its sensing, and the utilization of electrochemical methods and chemically modified electrodes for its determination. The main section covers voltammetric and amperometric sensing of Cys based on glassy carbon electrodes, screen printed electrodes, and carbon paste electrodes, modified with various electrocatalytic materials. The conclusion section discusses the current challenges of Cys determination and the future perspectives.

Pen sensor made with silver nanoparticles decorating graphite-polyurethane electrodes to detect bisphenol-A in tap and river water samples

Rapid, on-site detection of emerging pollutants is critical for monitoring health threats and the environment, especially if performed through autonomous systems. In this paper, we report on a new design of a complete electrochemical system whose working (WE), auxiliary (AE) and reference (RE) electrodes were obtained on a pen (PEN Sensor) made with graphite:polyurethane (GPUE). Working electrodes were decorated with spherical, ca. 200 nm silver nanoparticles (AgNPs) reduced on graphite using the polyol method. Differential pulse voltammetry (DPV) was used to detect bisphenol-A (BPA) in a linear range from 2.5 to 15 μmol L^-1 with detection limit of 0.24 μmol L^-1. The PEN Sensor could also detect bisphenol-A in tap and river water samples, with satisfactory reproducibility and repeatability, while common interferents did not affect electrooxidation of bisphenol-A. The high sensitivity and rapid detection are suitable for real-time analysis and in loco monitoring of emerging pollutants. With their robustness and versatility, PEN Sensors such as those fabricated here may be integrated into futuristic smart robotic systems.

Ultrasensitive determination of mercury ions using a glassy carbon electrode modified with nanocomposites consisting of conductive polymer and amino-functionalized graphene quantum dots

A one-pot method based on cyclic voltammetric scan was used to fabricate a glassy carbon electrode modified with nanocomposites consisting of poly(thionine) and amino-functionalized graphene quantum dots (afGQDs). Under near-neutral conditions, the dye polymer was effectively oxidized by hydroxyl radicals (·OH) that were derived from the copper-catalyzed Fenton-like reaction, and the cathodic peak current on the modified electrode greatly increased. The reaction of Cu²⁺ with thiourea (TU) and the generation of a complex, CuTU₂⁺, led to the decrease of Cu²⁺/Cu⁺ species, which inhibited the Fenton-like reaction and reduced the electrochemical response change. Due to a displacement reaction, the addition of Hg²⁺ into the H₂O₂-Cu²⁺-TU system resulted in the release of cuprous ions that benefited the Fenton-like reaction. Under the following optimal conditions: 6 mg mL^-1 afGQDs and the 25-cycle potential cycling for the fabrication of the modified electrode, pH 6.5, and the [Formula: see text] ratio of 1.0, the increasing extent of the cathodic peak current exhibited a good linear response to the logarithm of the Hg²⁺ concentration in the range of 1 pM-1 μM with a detection limit of 0.6 pM. Mercury ions in a water sample were determined with good recovery, ranging from 97 to 103%. The investigation on the uptake of Hg²⁺ into human vascular endothelial cells, HUVEC, shows that the cells incubated in the high-concentration glucose medium absorbed more mercury ions than HUVEC incubated in the normal medium. As a result, Hg²⁺ could lead to the greater damage to the former. Graphical abstract.

Recent Advances of Porous Graphene: Synthesis, Functionalization, and Electrochemical Applications

Graphene is a 2D sheet of sp² bonded carbon atoms and tends to aggregate together, due to the strong π-π stacking and van der Waals attraction between different layers. Its unique properties such as a high specific surface area and a fast mass transport rate are severely blocked. To address these issues, various kinds of 2D holey graphene and 3D porous graphene are either self-assembled from graphene layers or fabricated using graphene related materials such as graphene oxide and reduced graphene oxide. Porous graphene not only possesses unique pore structures, but also introduces abundant exposed edges and accelerates mass transfer. The properties and applications of these porous graphenes and their composites/hybrids have been extensively studied in recent years. Herein, recent progress and achievements in synthesis and functionalization of various 2D holey graphene and 3D porous graphene are reviewed. Of special interest, electrochemical applications of porous graphene and its hybrids in the fields of electrochemical sensing, electrocatalysis, and electrochemical energy storage, are highlighted. As the closing remarks, the challenges and opportunities for the future research of porous graphene and its composites are discussed and outlined.

Recent advances in the development of electrochemical aptasensors for detection of heavy metals in food

Heavy metal contamination in environment and food has attracted intensive attention from the public since it poses serious threats to ecological system and human health. Traditional detection methods for heavy metals such as atomic absorption spectrometry have a fairly low detection limit, but the methods have many limitations and disadvantages. Therefore, it is of significance to develop a rapid technology for real-time and online detection of heavy metals. The electrochemical aptasensor-based technology is promising in the detection of heavy metals with advantages of high sensitivity, specificity, and accuracy. Although its development is rapid, more researches should be carried out before this technology can be used for on-site detection. In this review, the origin, basic principles and development of electrochemical aptasensors are introduced. The applications of nanomaterials and electrochemical aptasensors for the detection of heavy metals (mainly mercury, lead, cadmium, and arsenic) are summarized. The research and application tendency of electrochemical aptasensors for detection of heavy metals are prospected.

Au@gap@AuAg Nanorod Side-by-Side Assemblies for Ultrasensitive SERS Detection of Mercury and its Transformation

As one of the most toxic heavy metal elements, mercury ion (Hg²⁺ ) and its methylated product, methylmercury (MeHg) can pose a threat to human health and the environment. Herein, a novel Raman biosensor with cascade sensitivity is developed for Hg²⁺ detection through Au@gap@AuAg nanorod side-by-side assemblies. Due to the strong electromagnetic coupling from the assemblies and core-shell structure, the Raman sensor possesses high sensitivity with the limit of detection (LOD) of 0.001 ng mL^-1 , which is about one order lower than traditional atomic fluorescence spectrometer (AFS) methods. Moreover, the fabricated biosensor is used to measure residual mercury levels in tissues and eggs of hens fed high-mercury diets, and the results show total mercury in collected egg yolks is 20 times higher than whites. Furthermore, the form of mercury in the eggs is also analyzed by high-performance liquid chromatography coupled with AFS, and, unexpectedly, the methylated product MeHg tends to only be found in egg whites. These interesting differences may indicate a new research direction for the toxicity of mercury in living organisms, and the developed ultrasensitive Surface Enhanced Raman Scattering (SERS) method could pave a broad way for the application of biosensors in Hg detection.

Electrochemical mercury biosensors based on advanced nanomaterials

This review presents an overview of the synthesis strategies and electrochemical performance of recently developed nanomaterials for the Hg²⁺ assay.

Construction of a ratiometric phosphorescent assay with long-lived carbon quantum dots and inorganic nanoparticles for its application in environmental and biological systems

An effective ratiometric phosphorescence assay for Hg²⁺ detection is established based on carbon quantum dots and inorganic nanoparticles (CDs–CaTiO₃:Pr³⁺@SiO₂).

Highly Sensitive AgNP/MWCNT/Nafion Modified GCE-Based Sensor for the Determination of Heavy Metals in Organic and Non-organic Vegetables

Silver nanoparticles/multi-walled carbon nanotubes/Nafion modified glassy carbon electrodes (AgNPs/MWCNTs/Nafion-GCE) were fabricated and were used as working electrode in anodic stripping voltammetry (ASV) for trace level determination of lead (Pb²⁺) and cadmium (Cd²⁺). The fabricated electrodes were characterized using scanning electron microscopy and cyclic voltammetry. The amounts of the electrode modifiers and the ASV parameters were optimized. It was found that the electrode modified with 1 mg AgNPs and 2 mg MWCNTs exhibited the best analytical response towards the determination of Pb²⁺ and Cd²⁺. The optimized ASV parameters were 60 s for the deposition time, 90 s for the accumulation time, and 100 mV/s for the scan rate. The electrode exhibited linearity from 0.493 ppb to 157.2 ppb for Pb²⁺ and 1.864 ppb to 155.1 ppb for Cd²⁺. The limit of detection was found to be 0.216 ppb for Pb²⁺ and 0.481 ppb for Cd²⁺. Real sampling analysis was carried out using organic vegetables from Sitio San Ysiro, Antipolo and Daraitan, Rizal and commercially available vegetables from Divisoria, all in Luzon, Philippines. Trace amounts of lead, cadmium, and copper were detected in the samples. Unwashed vegetables contained more heavy metal concentration compared to the washed vegetables. Atomic absorption spectroscopy was performed to validate the presence of the heavy metals in the vegetables.

Ultrasensitive impedimetric mercury(II) sensor based on thymine-Hg(II)-thymine interaction and subsequent disintegration of multiple sandwich-structured DNA chains

An impedimetric method is described for ultrasensitive analysis of mercury(II). It is based on thymine-Hg(II)-thymine interaction which causes the disintegration of multiple-sandwich structured DNA chains. DNA strands were selected that are partially complementary to the T-rich Hg(II)-specific oligonucleotides (MSO). They were immobilized on a gold electrode via Au-S interaction. Next, the MSO and the bridging strands (BS) that can connect adjacent MSOs were alternately attached through layer-by-layer hybridization. Thus, a multiple-sandwich structured interface in created that carries numerous MSOs. This leads to a change-transfer resistance (R_ct) values of the electrode-electrolyte interface at faradic electrochemical impedance spectroscopy measurements in the presence of the hexacyanoferrate(II)/(III) redox probe at 0.2 V (vs. Ag/AgCl). If Hg(II) is added to the solution, the MSOs selectively interact with Hg(II) to produce T-Hg(II)-T structures. Hence, the multiple-sandwich hybridization chains become disintegrated, and this causes a decrease in resistivity. The effect can be used to quantify Hg(II) over an analytical range that extends over four orders of magnitude (1 fM to 10 pM), and it has a 0.16 fM limit of detection under optimal conditions. Graphical abstract An electrochemical sensor for femtomolar level detection of Hg²⁺ is realized on the basis of thymine-Hg²⁺-thymine interaction which causes disintegration of multiple sandwich DNA hybridization strands.

Glassy Carbon: A Promising Material for Micro- and Nanomanufacturing

When certain polymers are heat-treated beyond their degradation temperature in the absence of oxygen, they pass through a semi-solid phase, followed by the loss of heteroatoms and the formation of a solid carbon material composed of a three-dimensional graphenic network, known as glassy (or glass-like) carbon. The thermochemical decomposition of polymers, or generally of any organic material, is defined as pyrolysis. Glassy carbon is used in various large-scale industrial applications and has proven its versatility in miniaturized devices. In this article, micro and nano-scale glassy carbon devices manufactured by (i) pyrolysis of specialized pre-patterned polymers and (ii) direct machining or etching of glassy carbon, with their respective applications, are reviewed. The prospects of the use of glassy carbon in the next-generation devices based on the material's history and development, distinct features compared to other elemental carbon forms, and some large-scale processes that paved the way to the state-of-the-art, are evaluated. Selected support techniques such as the methods used for surface modification, and major characterization tools are briefly discussed. Barring historical aspects, this review mainly covers the advances in glassy carbon device research from the last five years (2013⁻2018). The goal is to provide a common platform to carbon material scientists, micro/nanomanufacturing experts, and microsystem engineers to stimulate glassy carbon device research.

Potentiality of PARAFAC approaches for simultaneous determination of N-acetylcysteine and acetaminophen based on the second-order data obtained from differential pulse voltammetry

N-acetylcysteine (N-AC) has widespread application such as pharmaceutical drug and nutritional supplement. Its adverse effects are rash, urticaria, and itchiness and large doses of N-AC could potentially cause damage to the heart and lungs. Therefore, in this work, a sensitive voltammetric sensor based on a carbon paste electrode modified with silica nano particles (i.e. Mobil Composition of Matter (No. 41) modified with Boron Trifluoride or BF₃@MCM-41) with a combination of 4,4'-dihydroxybiphenyl (DHB) (BF₃@MCM-41/DHB/CPE) was designed for determination of N-AC. The electrochemical oxidation of N-AC was examined using various techniques such as cyclic voltammetry (CV), chronoamperometry and differential pulse voltammetry (DPV). Under the optimum conditions, some parameters such as electron transfer coefficient (α) and heterogeneous rate constant (k_s) were estimated for N-AC. Due to the use of N-AC for the treatment of acetaminophen (AC) overdose, the application of modified electrode was investigated for the simultaneous determination of N-AC and AC in blood serum and tablet samples. Since, the signals of these species overlap and due to the presence of interfering species in blood samples, the simultaneous determination of mentioned species is difficult or impossible. To overcome this challenge, parallel factor analysis (PARAFAC) was used for the analysis of the complex matrices to obtain the spectral profile of each component and interference. To achieve this goal, electrochemical second-order data were generated using a simple change in pulse height of differential pulse voltammetry. The results of the presently proposed strategy for the real samples analysis are similar to those obtained with HPLC. Thus, the proposed method has acceptable performance for simultaneous determination of the two species in real samples.

A robust electrochemical sensing platform using carbon paste electrode modified with molecularly imprinted microsphere and its application on methyl parathion detection

A highly sensitive electrochemical sensor using a carbon paste electrode (CPE) modified with surface molecularly imprinted polymeric microspheres (SMIPMs) was developed for methyl parathion (MP) detection. Molecular imprinting technique based on distillation precipitation polymerization was applied to prepare SMIPMs and non-surface imprinted microspheres (MIPMs). The polymer properties including morphology, size distribution, BET specific surface area and adsorption performance were investigated and compared carefully. Both MIPMs and SMIPMs were adopted to prepare CPE sensors and their electrochemical behaviors were characterized via cyclic voltammetry and electrochemical impedance spectroscopy. Compared with MIPMs packed sensor, SMIPMs/CPE exhibits a higher sensing response towards MP with linear detection range of 1 × 10^-12-8 × 10^-9 mol L^-1 and detection limit of 3.4 × 10^-13 mol L^-1 (S/N = 3). Moreover, SMIPMs/CPE exhibits good selectivity and stability in multiple-cycle usage and after long-time storage. Finally, the developed sensor was used to determine MP in real samples including soil and vegetables and only simple pretreatment is needed. The detection results were consistent with those obtained from liquid chromatography. Collectively, this newly developed sensor system shows significant potential for use in a variety of fields like food safety, drug residue determination and environmental monitoring.

DNA-templated copper nanoparticles for voltammetric analysis of endonuclease activity

A voltammetric sensor for the detection of endonuclease activity is constructed based on DNA-templated copper nanoparticles.