Direct Surface and Droplet Microsampling for Electrospray Ionization Mass Spectrometry Analysis with an Integrated Dual-Probe Microfluidic Chip

Monolithic 3D nanoelectrospray emitters based on a continuous fluid-assisted etching strategy for glass droplet microfluidic chip-mass spectrometry

Glass microfluidic chips are suitable for coupling with mass spectrometry (MS) due to their flexible design, optical transparency and resistance to organic reagents. However, due to the high hardness and brittleness of glass, there is a lack of simple and feasible technology to manufacture a monolithic nanospray ionization (nESI) emitter on a glass microchip, which hinders its coupling with mass spectrometry. Here, a continuous fluid-assisted etching strategy is proposed to fabricate monolithic three-dimensional (3D) nESI emitters integrated into glass microchips. A continuous fluid of methanol is adopted to protect the inner wall of the channels and the bonding interface of the glass microfluidic chip from being wet-etched, forming sharp 3D nESI emitters. The fabricated 3D nESI emitter can form a stable electrospray plume, resulting in consistent nESI detection of acetylcholine with an RSD of 4.5% within 10 min. The fabricated 3D emitter is integrated on a glass microfluidic chip designed with a T-junction droplet generator, which can realize efficient analysis of acetylcholine in picoliter-volume droplets by nESI-MS. Stability testing of over 20 000 droplets detected by the established system resulted in an RSD of 9.1% over approximately 180 min. The detection of ten neurochemicals in rat cerebrospinal fluid droplets is achieved. The established glass droplet microfluidic chip-MS system exhibits potential for broad applications such as in vivo neurochemical monitoring and single-cell analysis in the future.

A review on hyphenation of droplet microfluidics to separation techniques: From instrumental conception to analytical applications for limited sample volumes

In this study, we review various strategies to couple sample processing in microfluidic droplets with different separation techniques, including liquid chromatography, mass spectrometry, and capillary electrophoresis. Separation techniques interfaced with droplet microfluidics represent an emerging trend in analytical chemistry, in which micro to femtoliter droplets serve as microreactors, a bridge between analytical modules, as well as carriers of target analytes between sample treatment and separation/detection steps. This allows to overcome the hurdles encountered in separation science, notably the low degree of module integration, working volume incompatibility, and cross contamination between different operational stages. For this droplet-separation interfacing purpose, this review covers different instrumental designs from all works on this topic up to May 2023, together with our viewpoints on respective advantages and considerations. Demonstration and performance of droplet-interfaced separation strategies for limited sample volumes are also discussed.

Microfluidic Sampling of Undissolved Components from Subcellular Regions of Living Single Cells for Mass Spectrometry Analysis

Precise sampling of undissolved chemical components from subcellular regions of living single cells is a prerequisite for their in-depth analysis, which could promote understanding of subtle early stage physiological or pathological processes. Here we report a microfluidic method to extract undissolved components from subcellular regions for MS analysis. The target single cell was isolated by the microchamber beneath the microfluidic probe and washed by the injected biocompatible isotonic glucose aqueous solution (IGAS). Then, the sampling solvent was injected to extract undissolved components from the expected subcellular region of the living single cell, where the position and size of the sampling region could be controlled. The components immobilized by undissolved cellular structures were proven to be successfully extracted. Since unextracted subcellular regions were protected by IGAS, the single cell could survive after a tiny part was extracted, providing the possibility of repetitive sampling of the same living cell. Phospholipids extracted from the subcellular regions were successfully identified. The results demonstrated the feasibility of our method for subcellular sampling and analysis.

Research progress on pesticide residue detection based on microfluidic technology

The problem of pesticide residue contamination has attracted widespread attention and poses a risk to human health. The current traditional pesticide residue detection methods have difficulty meeting rapid and diverse field screening requirements. Microfluidic technology integrates functions from sample preparation to detection, showing great potential for quick and accurate high-throughput detection of pesticide residues. This paper reviews the latest research progress on microfluidic technology for pesticide residue detection. First, the commonly used microfluidic materials are summarized, including silicon, glass, paper, polydimethylsiloxane, and polymethyl methacrylate. We evaluated their advantages and disadvantages in pesticide residue detection applications. Second, the current pesticide residue detection technology based on microfluidics and its application to real samples are summarized. Finally, we discuss this technology's present challenges and future research directions. This study is expected to provide a reference for the future development of microfluidic technology for pesticide residue detection.

Recent advances in microfluidics for single-cell functional proteomics

Single-cell proteomics (SCP) reveals phenotypic heterogeneity by profiling individual cells, their biological states and functional outcomes upon signaling activation that can hardly be probed via other omics characterizations. This has become appealing to researchers as it enables an overall more holistic view of biological details underlying cellular processes, disease onset and progression, as well as facilitates unique biomarker identification from individual cells. Microfluidic-based strategies have become methods of choice for single-cell analysis because they allow facile assay integrations, such as cell sorting, manipulation, and content analysis. Notably, they have been serving as an enabling technology to improve the sensitivity, robustness, and reproducibility of recently developed SCP methods. Critical roles of microfluidics technologies are expected to further expand rapidly in advancing the next phase of SCP analysis to reveal more biological and clinical insights. In this review, we will capture the excitement of the recent achievements of microfluidics methods for both targeted and global SCP, including efforts to enhance the proteomic coverage, minimize sample loss, and increase multiplexity and throughput. Furthermore, we will discuss the advantages, challenges, applications, and future prospects of SCP.

Attomole-Level Multiplexed Detection of Neurochemicals in Picoliter Droplets by On-Chip Nanoelectrospray Ionization Coupled to Mass Spectrometry

While droplet microfluidics is becoming an effective tool for biomedical research, sensitive detection of droplet content is still challenging, especially for multiplexed analytes compartmentalized within ultrasmall droplets down to picoliter volumes. To enable such measurements, we demonstrate a silicon-based integrated microfluidic platform for multiplexed analysis of neurochemicals in picoliter droplets via nanoelectrospray ionization (nESI)-mass spectrometry (MS). An integrated silicon microfluidic chip comprising downscaled 7 μm-radius channels, a compact T-junction for droplet generation, and an integrated nESI emitter tip is used for segmentation of analytes into picoliter compartments and their efficient delivery for subsequent MS detection. The developed system demonstrates effective detection of multiple neurochemicals encapsulated within oil-isolated plugs down to low picoliter volumes. Quantitative measurements for each neurochemical demonstrate limits of detection at the attomole level. Such results are promising for applications involving label-free and small-volume detection for monitoring a range of brain chemicals.

Faster, better, and cheaper: harnessing microfluidics and mass spectrometry for biotechnology

High-throughput screening technologies are widely used for elucidating biological activities. These typically require trade-offs in assay specificity and sensitivity to achieve higher throughput. Microfluidic approaches enable rapid manipulation of small volumes and have found a wide range of applications in biotechnology providing improved control of reaction conditions, faster assays, and reduced reagent consumption. The integration of mass spectrometry with microfluidics has the potential to create high-throughput, sensitivity, and specificity assays. This review introduces the widely-used mass spectrometry ionization techniques that have been successfully integrated with microfluidics approaches such as continuous-flow system, microchip electrophoresis, droplet microfluidics, digital microfluidics, centrifugal microfluidics, and paper microfluidics. In addition, we discuss recent applications of microfluidics integrated with mass spectrometry in single-cell analysis, compound screening, and the study of microorganisms. Lastly, we provide future outlooks towards online coupling, improving the sensitivity and integration of multi-omics into a single platform.

Emerging open microfluidics for cell manipulation

Cell manipulation is the foundation of biochemical studies, which demands user-friendly, multifunctional and precise tools. Based on flow confinement principles, open microfluidics can control the movement of microscale liquid in open space. Every position of the circuit is accessible to external instruments, making it possible to perform precise treatment and analysis of cells at arbitrary target positions especially at the single-cell/sub-cell level. Benefiting from its unique superiority, various manipulations including patterned cell culture, 3D tissue modelling, localized chemical stimulation, online cellular factor analysis, single cell sampling, partial cell treatment, and subcellular free radical attack can be easily realized. In this tutorial review, we summarize two basic ideas to design open microfluidics: open microfluidic networks and probes. The principles of mainstream open microfluidic methods are explained, and their recent important applications are introduced. Challenges and developing trends of open microfluidics are also discussed.

On-chip mass spectrometric analysis in non-polar solvents by liquid beam infrared matrix-assisted laser dispersion/ionization

By the on-chip integration of a droplet generator in front of an emitter tip, droplets of non-polar solvents are generated in a free jet of an aqueous matrix. When an IR laser irradiates this free liquid jet consisting of water as the continuous phase and the non-polar solvent as the dispersed droplet phase, the solutes in the droplets are ionized. This ionization at atmospheric pressure enables the mass spectrometric analysis of non-polar compounds with the aid of a surrounding aqueous matrix that absorbs IR light. This works both for non-polar solvents such as n-heptane and for water non-miscible solvents like chloroform. In a proof of concept study, this approach is applied to monitor a photooxidation of N-phenyl-1,2,3,4-tetrahydroisoquinoline. By using water as an infrared absorbing matrix, analytes, dissolved in non-polar solvents from reactions carried out on a microchip, can be desorbed and ionized for investigation by mass spectrometry.

An Integrated Microfluidic Probe for Mass Spectrometry Imaging of Biological Samples*

Ambient ionization based on liquid extraction is widely used in mass spectrometry imaging (MSI) of molecules in biological samples. The development of nanospray desorption electrospray ionization (nano-DESI) has enabled the robust imaging of tissue sections with high spatial resolution. However, the fabrication of the nano-DESI probe is challenging, which limits its dissemination to the broader scientific community. Herein, we describe the design and performance of an integrated microfluidic probe (iMFP) for nano-DESI MSI. The glass iMFP, fabricated using photolithography, wet etching, and polishing, shows comparable performance to the capillary-based nano-DESI MSI in terms of stability and sensitivity; a spatial resolution of better than 25 μm was obtained in these first proof-of-principle experiments. The iMFP is easy to operate and align in front of a mass spectrometer, which will facilitate broader use of liquid-extraction-based MSI in biological research, drug discovery, and clinical studies.

An integrated microfluidic 3D tumor system for parallel and high-throughput chemotherapy evaluation

The development of a microplatform with multifunctional integration allowing the dynamic and high-throughput exploration of three-dimensional (3D) cultures is promising for biomedical research. Here, we introduce an integrated microfluidic 3D tumor system with pneumatic manipulation and chemical gradient generation to investigate anticancer therapy in a parallel, controllable, dynamic, and high-throughput manner. The stability of the microfluidic system to realize precise and long-term chemical gradient production was developed. Serial manipulations including active cell trapping, array-like tumor self-assembly and formation, reliable gradient generation, parallel multi-concentration drug stimulation, and real-time tumor analysis were achieved in a single microfluidic device. The microfluidic platform was demonstrated to be stable for high-throughput cell trapping and 3D tumor formation with uniform quantities. On-chip analysis of phenotypic tumor responses to diverse chemotherapies with different concentrations can be conducted in this device. The microfluidic advancement holds great potential for applications in the development of high-performance and multi-functional biomimetic tumor systems and in the fields of cancer research and pharmaceutical development.

LC-Swan Probe: An Integrated In Situ Sampling Interface for Liquid Chromatography Separation and Mass Spectrometry Analysis

In situ sampling mass spectrometry (MS) systems can achieve rapid analysis of samples, while most of them do not have the pretreatment capability of chromatographic separation. This Article describes the design, fabrication, and application of a swan-shaped in situ sampling MS probe with liquid chromatography (LC) separation capacity. The LC-Swan probe was fabricated based on a single capillary with a micrometer-sized hole at its U-shaped bottom for sampling, a monolithic column for separation, and a tapered tip for electrospray. Four functions including in situ sampling, sample injection, chromatographic separation, and MS electrospray were integrated in the LC-Swan probe. Direct sampling and contacting-dissolution-injection sampling modes were developed to perform in situ sampling and injection of liquid samples and dry spot samples, respectively, in the high flow-resistance LC system. A pressing-sealing method was also developed using a polydimethylsiloxane (PDMS) sealer to achieve the sealing of the probe sampling hole during the high-pressure chromatographic separation process. The LC-Swan probe-based system exhibited effective desalting capacity in the analysis of angiotensin II with similar relative standard deviations (RSDs) of retention time and peak area below 3% and 19% (n = 3) for both salt-containing and salt-free samples. The present system was applied for analyzing cytochrome C digest to test its separation capability for samples with complex compositions, and 19 peptides were detected in 13 min with an amino acid coverage of 85%. We also applied the system in metabolite analysis of mouse organ sections of brain, liver, and kidney to preliminarily demonstrate its application potential in MS imaging analysis.

Microfluidic Probe for In-Situ Extraction of Adherent Cancer Cells to Detect Heterogeneity Difference by Electrospray Ionization Mass Spectrometry

The pathological studies of cancer tissues and cell molecules could provide an early diagnosis for the treatment of cancer. In this work, we have designed a microfluidic surface extractor (MSE). The MSE has been coupled with electrospray mass spectrometry (extraction reagent, methanol; optimum flow rate, 0.5 mL/h) to analyze the phospholipid content of different tumor cells. Three types of cancer cell lines, including A549 cells, HepG2 cells, and U87 cells, were investigated, and the principle component analysis (PCA: linear discriminant analysis (LDA), PC1 97.2%; PC2, 2.8%) was carried out to analyze the difference in the lipid contents. The LDA revealed heterogeneity among the cancer cells. The designed MSE could have potential applications in the clinical analysis of cancer tissues.

Microfluidic device fabrication mediated by surface chemical bonding

This review discusses on various bonding techniques for fabricating microdevices with a special emphasis on the modification of surface assisted by the use of chemicals to assemble microfluidic devices at room temperature under atmospheric pressure.

Deciphering Metabolic Heterogeneity by Single-Cell Analysis

Single-cell analysis provides insights into cellular heterogeneity and dynamics of individual cells. This Feature highlights recent developments in key analytical techniques suited for single-cell metabolic analysis with a special focus on mass spectrometry-based analytical platforms and RNA-seq as well as imaging techniques that reveal stochasticity in metabolism.

Enhancement and control of neuron adhesion on polydimethylsiloxane for cell microengineering using a functionalized triblock polymer

Polydimethylsiloxane (PDMS)-based neuron microengineering provides new opportunities for spatiotemporal control of neuronal activity and stimuli. The demand for long-lasting adhesive PDMS surfaces has steered the development of straightforward, feasible, and accessible interface modifications. Here, we describe an innovative approach for promoting and engineering neuron adhesion on a PDMS substrate based on a very simple modification using poly-d-lysine-conjugated Pluronic F127, a functionalized triblock polymer. The modification procedure only involves single-step pipetting or microfluidic-guided introduction for the reinforcement of cell adhesion in quantity, extensibility, and stability. Micropatterning at a single-cell resolution, microfluidic long-term culture, and neuron network formation were achieved. The present approach provides a previously unprecedented simple and effective technique for neuron adhesion on PDMS and may be useful for applications in neurobiology, tissue engineering, and neuronal microsystems.

High-Throughput Nanoelectrospray Ionization-Mass Spectrometry Analysis of Microfluidic Droplet Samples

Droplet microfluidics enables high-throughput manipulation of fL-μL volume samples. Methods implemented for the chemical analysis of microfluidic droplets have been limited in scope, leaving some applications of droplet microfluidics difficult to perform or out of reach entirely. Nanoelectrospray ionization-mass spectrometry (nESI-MS) is an attractive approach for droplet analysis, because it allows rapid, label-free, information-rich analysis with high mass sensitivity and resistance to matrix effects. Previous proof-of-concept systems for the nESI-MS analysis of droplets have been limited by the microfluidics used so that stable, long-term operation needed for high-throughput applications has not been demonstrated. We describe a platform for the stable analysis of microfluidic droplet samples by nESI-MS. Continuous infusion of droplets to an nESI emitter was demonstrated for as long as 2.5 h, corresponding to analysis of over 20 000 samples. Stable signal was observed for droplets as small as 65 pL and for throughputs as high as 10 droplets/s. A linear-concentration-based response and sample-to-sample carryover of <3% were also shown. The system is demonstrated for measuring products of in-droplet enzymatic reactions.

Rapid generation of chemical combinations on a magnetic digital microfluidic array

Combinatorial screening is frequently used to identify chemicals with synergistic effects by measuring the response of biological entities exposed to various chemical-dose combinations. Conventional microwell-based combinatorial screening is resource-demanding, and the closed microfluidics-based screening requires sophisticated fluidic control systems. In this work, we present a novel combinatorial screening platform based on the surface energy trap (SET)-assisted magnetic digital microfluidics. This platform, known as FlipDrop, rapidly generates chemical combinations by coupling two droplet arrays with orthogonal chemical concentration gradients with a simple flip. We have illustrated the working principle of FlipDrop by generating combinations of quantum dots. We have also successfully demonstrated the screening of quantum dot fluorescence resonance energy transfer (QD-FRET) on the FlipDrop platform by measuring the FRET response. This report demonstrates that FlipDrop is capable of rapidly generating chemical combinations with unprecedented ease for combinatorial screening.

FlipDrop is a combinatorial screening platform. It enables rapid generation of chemical combinations by flipping and coupling two droplet arrays generated by surface energy traps on the magnetic digital microfluidic platform.

Electrochemical Biosensing System for Single Cells, Cellular Aggregates and Microenvironments

Applications of electrochemical biosensing for surveying intact cells and tissues have been focus of attention. Two experimental approaches have been used when performing amperometric measurements on biological cells, the stylus-type microelectrode probes and the electrode-integrated microdevices based on lithographic technologies. For the probe scanning approach, various types of microsensors were developed to monitor localized physical or chemical natures at a variety of surfaces in situ under wet conditions. Scanning electrochemical microscopy (SECM) has been applied for monitoring local oxygen, enzyme activity, and collection of transcripts. For the non-scanning type of approach, electrode array devices allow very rapid response, parallel monitoring, and multi-analyte assay. Sveral topics of on-chip-culture system were introduced especially concerning on gene expression monitoring by reporter system and reconstruction of in vivo-like nature by controlling microenvironments. Electrochemical reporter assay has been demonstrated to monitor the gene expression process of the gene-modified cultured cells. Long-term monitoring of cellular function of spheroids and three dimensionally-cultured cells were carried out by controlling microenvironments on the cellular chip.

Automating drug discovery

Small-molecule drug discovery can be viewed as a challenging multidimensional problem in which various characteristics of compounds - including efficacy, pharmacokinetics and safety - need to be optimized in parallel to provide drug candidates. Recent advances in areas such as microfluidics-assisted chemical synthesis and biological testing, as well as artificial intelligence systems that improve a design hypothesis through feedback analysis, are now providing a basis for the introduction of greater automation into aspects of this process. This could potentially accelerate time frames for compound discovery and optimization and enable more effective searches of chemical space. However, such approaches also raise considerable conceptual, technical and organizational challenges, as well as scepticism about the current hype around them. This article aims to identify the approaches and technologies that could be implemented robustly by medicinal chemists in the near future and to critically analyse the opportunities and challenges for their more widespread application.