Electrochemically Mediated Surface-Initiated de Novo Growth of Polymers for Amplified Electrochemical Detection of DNA

Glycan-Evocated Metallization for Amplification-Free Electrochemical Detection of Glycoproteins at Low Concentration Levels

Glycoproteins have become the most often screened tumor markers in the in vitro diagnostics. Although a large number of electrochemical methods have been proposed to sensitively detect glycoproteins, most of them involve the aid of laborious signal amplification. Herein, we report the use of glycan-evocated metallization (GlyMetal) for the amplification-free electrochemical detection of glycoproteins at low concentration levels. Briefly, the glycoproteins of interest are captured by an aptamer recognition layer, and then the glycans of targets are oxidized by NaIO4 to convert the 1,2-diol sites into aldehyde groups for the silver deposition-based metallization, followed by the electrochemical stripping assay of the deposited metallic silver for glycoprotein quantification via the established solid-state Ag/AgCl voltammetric process. As GlyMetal can enable the deposition of a large amount of metallic silver and a high signal-to-background ratio can be obtained for the solid-state Ag/AgCl voltammetric stripping assay, the developed GlyMetal-based electrochemical method is applicable to the amplification-free detection of glycoproteins. As a proof of concept, a detection limit of 1.65 pg/mL has been achieved for carcinoembryonic antigen (CEA) detection. In addition to the high selectivity, desirable results have been obtained with respect to the use of the method for CEA detection in serum samples. In consideration of the desirable simplicity, short assay time, and cost-effectiveness of the amplification-free approach, the GlyMetal-based electrochemical method shows great promise in the point-of-care detection of glycoproteins.

A sensitive Ag+-mediated magnetic relaxation and colorimetry dual-mode sensing platform

To address the relatively low sensitivity of current redox reagent-mediated magnetic relaxation sensing methods, we present a novel Ag+-mediated magnetic sensing platform that enhances the sensitivity by three orders of magnitude. The new sensing platform is based on Ag+-catalyzed oxidation of Mn2+ to KMnO4, accompanied by a distinct color change, which facilitates colorimetric detection. In the case of insufficient Ag+ ions, MnO2 is an additional oxidation product and the KMnO4/MnO2 ratio is dependent on the concentration of Ag+. When combined with a specific quantity of reducing agent, both KMnO4 and MnO2 are reduced to Mn2+ with a large relaxivity, and the concentration of Mn2+ in the resultant solution inversely correlates with the amount of KMnO4 since KMnO4 consumes more reductant during reduction. Consequently, the transverse relaxation rate of the solution exhibits a negative correlation with the Ag+ concentration. Thus, by coupling this Ag+-mediated Mn2+ to KMnO4 transformation with reactions that modulate Ag+ concentration, a dual-mode sensing platform for magnetic relaxation and colorimetry can be realized. Herein, we take H2O2 as an example to verify the detection performance of this sensing platform since H2O2 can oxidize Ag0 in Ag@Fe3O4 nanoparticles to Ag+. Experimental findings demonstrate detection limits of 10 nM and 20 nM for the magnetic relaxation and colorimetry modes, respectively, affirming the excellent sensitivity and the potential practical application of this strategy.

Programmable DNA Nanomachine Integrated with Electrochemically Controlled Atom Transfer Radical Polymerization for Antibody Detection at Picomolar Level

The quantitative detection of antibodies is crucial for the diagnosis of infectious and autoimmune diseases, while the traditional methods experience high background signal noise and restricted signal gain. In this work, we have developed a highly efficient electrochemical biosensor by constructing a programmable DNA nanomachine integrated with electrochemically controlled atom transfer radical polymerization (eATRP). The sensor works by binding the target antidigoxin antibody (anti-Dig) to the epitope of the recognization probe, which then initiates the cascaded strand displacement reaction on a magnetic bead, leading to the capture of cupric oxide (CuO) nanoparticles through magnetic separation. After CuO was dissolved, the eATRP initiators were attached to the electrode based on the CuΙ-catalyzed azide-alkyne cycloaddition. The subsequent eATRP reaction results in the formation of long electroactive polymers (poly-FcMMA), producing an amplified current response for sensitive detection of anti-Dig. This method achieved a detection limit at clinically relevant picomolar concentration in human serum, offering a sensitive, convenient, and cost-effective tool for detecting various biomarkers in a wide range of applications.

Site-Directed Electrochemical Grafting for Amplified Detection of Antibody Pharmaceuticals

Antibody pharmaceuticals have become the most popular immunotherapeutic drugs and are often administered with low serum drug dosages. Hence, the development of a highly sensitive method for the quantitative assay of antibody levels is of great importance to individualized therapy. On the basis of the dual signal amplification by the glycan-initiated site-directed electrochemical grafting of polymer chains (glyGPC), we report herein a novel strategy for the amplified electrochemical detection of antibody pharmaceuticals. The target of interest was affinity captured by a DNA aptamer ligand, and then the glycans of antibody pharmaceuticals were decorated with the alkyl halide initiators (AHIs) via boronate cross-linking, followed by the electrochemical grafting of the ferrocenyl polymer chains from the glycans of antibody pharmaceuticals through the electrochemically controlled atom transfer radical polymerization (eATRP). As the glycans can be decorated with multiple AHIs and the grafted polymer chains are composed of tens to hundreds of electroactive tags, the glyGPC-based strategy permits the dually amplified electrochemical detection of antibody pharmaceuticals. In the presence of trastuzumab (Herceptin) as the target, the glyGPC-based strategy achieved a detection limit of 71.5 pg/mL. Moreover, the developed method is highly selective, and the results of the quantitative assay of trastuzumab levels in human serum are satisfactory. Owing to its uncomplicated operation and cost-effectiveness, the glyGPC-based strategy shows great promise in the amplified electrochemical detection of antibody pharmaceuticals.

Hybridization chain reaction-enhanced electrochemically mediated ATRP coupling high-efficient magnetic separation for electrochemical aptasensing of cardiac troponin I

The sensitive and accurate detection of cardiac troponin I (cTnI) as a gold biomarker for cardiovascular diseases at an early stage is crucial but has long been a challenge. In this study, we presented such an electrochemical (EC) aptasensor by combining hybridization chain reaction (HCR)-enhanced electrochemically mediated atom transfer radical polymerization (eATRP) amplification with high-efficient separation of magnetic beads (MBs). Aptamer-modified MBs empowered effective recognition and separation of cTnI from complex samples with high specificity. The specific binding of cTnI and aptamer could release triggered DNA (T-DNA) into solution to drive an HCR process, which produced plentiful active sites for eATRP initiators labeling followed by initiating eATRP process. With the development of eATRP, a great many of electroactive polymer probes were continually in situ formed to generate amplified current output for signal enhancement. Compared to no amplification, HCR-enhanced eATRP promoted the signals by ∼10-fold, greatly improving detection sensitivity for low-abundant cTnI analysis. Integrating MBs as capture carriers with HCR-enhanced eATRP as amplification strategy, this EC aptasensor achieved a low detection limit of 10.9 fg/mL for cTnI detection. Furthermore, the reliable detectability and anti-interference were confirmed in serum samples, indicating its promising application toward early diagnosis of cardiovascular diseases.

A highly sensitive and robust electrochemical biosensor for microRNA detection based on PNA-DNA hetero-three-way junction formation and target-recycling catalytic hairpin assembly amplification

Robust and sensitive methods for the detection of microRNAs (miRNAs) are crucial in the clinical diagnosis of cancers. In this study, a novel electrochemical biosensor with high sensitivity for miRNA-21 detection is developed, which relies on the formation of a peptide nucleic acid (PNA)-DNA hetero-three-way junction (H3WJ) and target-recycling catalytic hairpin assembly (CHA) amplification. The electroneutral PNA probes are initially immobilized onto a gold electrode to construct the sensor. Upon introduction of miRNA-21, target-recycling CHA is initiated, resulting in abundant double-stranded CHA products. Subsequently, association between the PNA probes and these products leads to the formation of PNA-DNA H3WJs. Consequently, the electrode surface is densely populated with numerous electroactive Ferrocene (Fc) groups, resulting in a significantly amplified current response for highly sensitive detection of miRNA-21 at concentrations as low as 0.15 fM. This approach demonstrates remarkable specificity towards target miRNAs and can be utilized for quantitative monitoring of miRNA-21 expression in human cancer cells. More importantly, the sensor exhibits exceptional stability and shows a significant reduction in background noise during miRNA detection, making this method a highly promising sensing platform for monitoring various miRNA biomarkers to facilitate the diagnosis of diverse cancers.

Ultrasensitive detection of miRNA-21 by click chemistry and fluorescein-mediated photo-ATRP signal amplification

The development of a convenient and efficient assay using miRNA-21 as a lung cancer marker is of great importance for the early prevention of cancer. Herein, an electrochemical biosensor for the detection of miRNA-21 was successfully fabricated under blue light excitation using click chemistry and photocatalytic atom transfer radical polymerization (photo-ATRP). By using hairpin DNA as a recognition probe, the electrochemical sensor deposits numerous electroactive monomers (ferrocenylmethyl methacrylate) on the electrode surface under the reaction of photocatalyst (fluorescein) and pentamethyldiethylenetriamine, thereby achieving signal amplification. This biosensor is sensitive, precise and selective for miRNA-21, and is highly specific for RNAs with different base mismatches. Under optimal conditions, the biosensor showed a linear relationship in the range of 10 fM ∼1 nM (R2 = 0.995), with a detection limit of 1.35 fM. Furthermore, the biosensor exhibits anti-interference performance when analyzing RNAs in serum samples. The biosensor is based on green chemistry and has the advantages of low cost, specificity and anti-interference ability, providing economic benefits while achieving detection objectives, which makes it highly promising for the analysis of complex samples.

Amplification-Free Ratiometric Electrochemical Aptasensor for Point-of-Care Detection of Therapeutic Monoclonal Antibodies

The rapid quantification of therapeutic monoclonal antibodies (mAbs) is of great significance to their pharmacokinetics/pharmacodynamics (PK/PD) research and the personalized medication for disease treatment. Taking advantage of the direct decoration of tens of redox tags to the target of interest, we illustrate herein an amplification-free ratiometric electrochemical aptasensor for the point-of-care (POC) detection of trace amounts of therapeutic mAbs. The POC detection of therapeutic mAbs involved the use of the methylene blue (MB)-conjugated aptamer as the affinity element and the decoration of therapeutic mAbs with ferrocene (Fc) tags via the boronate crosslinking, in which the MB-derived peak current was used as the reference signal, and the peak current of the Fc tag was used as the output signal. As each therapeutic mAb carries tens of diol sites for the site-specific decoration of the Fc output tags, the boronate crosslinking enabled the amplification-free detection, which is cost-effective and quite simple in operation. In the presence of bevacizumab (BevMab) as the target, the resulting ratiometric signal (i.e., the IFc/IMB value) exhibited a good linear response over the range of 0.025-2.5 μg/mL, and the limit of detection (LOD) of the electrochemical aptasensor was 6.5 ng/mL. Results indicated that the aptamer-based affinity recognition endowed the detection of therapeutic mAbs with high selectivity, while the ratiometric readout exhibited satisfactory reproducibility and robustness. Moreover, the ratiometric electrochemical aptasensor is applicable to the detection of therapeutic mAbs in serum samples. Taking together, the amplification-free ratiometric electrochemical aptasensor holds great promise in the POC detection of therapeutic mAbs.

Mn-MOF catalyzed multi-site atom transfer radical polymerization electrochemical sensing of miRNA-21

A green electrochemical biosensor was developed based on metal-organic framework (MOF)-catalyzed atom transfer radical polymerization (ATRP) for quantifying miRNA-21, used as the proof-of-concept analyte. Unlike conventional ATRP, Mn-PCN-222 (PCN, porous coordination network) could be used as an alternative for green catalyst to substitute traditional catalysts. First, poly (diallyldimethylammonium chloride) (PDDA) was fixed on the surface of the indium tin oxide (ITO) electrode, and then the Mn-PCN-222 was linked to ITO electrode via electrostatic binding with PDDA. Next, aminated ssDNA (NH₂-DNA) was used to modify the electrode further by amide reaction with Mn-PCN-222. Then, the recognition and hybridization of NH₂-DNA with miRNA-21 prompt the generation of DNA-RNA complexes, which further hybridize with Fc-DNA@β-CD-Br₁₅ and permit the initiator to be immobilized on the electrode surface. Accordingly, β-CD-Br₁₅ could initiate the polymerization of ferrocenylmethyl methacrylates (FcMMA) under the catalysis of MOF to complete the ATRP reaction. FcMMA presented a distinct electrochemical signal at ~ 0.33 V. Taking advantage of the unique multi-site properties of β-CD-Br₁₅ and the efficient catalytic reaction induced by Mn-PCN-222, ultrasensitive detection of miRNA-21 was achieved with a detection limit of 0.4 fM. The proposed electrochemical biosensor has been applied to the detection of miRNA-21 in serum samples. Therefore, the proposed strategy exhibited potential in early clinical biomedicine.

PD-L1 exosomes electrochemical sensor based on coordination of AgNCs and Zr4+: Multivalent peptide enhancing target capture efficiency and antifouling performance

Programmed death ligand 1 (PD-L1) exosomes are important biomarkers of immune activation in the initial stages of treatment and can predict clinical responses to PD-1 blockade in various cancer patients. However, traditional PD-L1 exosome bioassays face challenges such as high interface fouling in complex detection environments, limited detection specificity, and poor clinical serum applicability. Inspired by the multi-branched structure of trees, a biomimetic tree-like multifunctional antifouling peptide (TMAP)-assisted electrochemical sensor was developed for high-sensitivity exosomes detection. Multivalent interaction of TMAP significantly enhances the binding affinity of PD-L1 exosomes, thanks to the designed branch antifouling sequence, TMAPs antifouling performance is further improved. The addition of Zr⁴⁺ forms coordination bonds with the exosome's lipid bilayer phosphate groups to achieve highly selective and stable binding without interference from protein activity. The specific coordination between AgNCs and Zr⁴⁺ contributes to a dramatic change in the electrochemical signals, and lowing detection limit. The designed electrochemical sensor exhibited excellent selectivity and a wide dynamic response within the PD-L1 exosome concentration range from 78 to 7.8 × 10⁷ particles/mL. Overall, the multivalent binding ability of TMAP and the signal amplification characteristics of AgNCs have a certain driving role in achieving clinical detection of exosomes.

Dually Amplified Electrochemical Aptasensor for Endotoxin Detection via Target-Assisted Electrochemically Mediated ATRP

As the entering of bacterial endotoxin into blood can cause various life-threatening pathological conditions, the screening and detection of low-abundance endotoxin are of great importance to human health. Taking advantage of signal amplification by target-assisted electrochemically mediated atom transfer radical polymerization (teATRP), we illustrate herein a simple and cost-effective electrochemical aptasensor capable of detecting endotoxin with high sensitivity and selectivity. Specifically, the aptamer receptor was employed for the selective capture of endotoxin, of which the glycan chain was then decorated with ATRP initiators via covalent coupling between the diol sites and phenylboronic acid (PBA) group, followed by the recruitment of ferrocene signal reporters via the grafting of polymer chains through potentiostatic eATRP under ambient temperature. As the glycan chain of endotoxin can be decorated with hundreds of ATRP initiators while the further grafting of polymer chains through eATRP can recruit hundreds to thousands of signal reporters to each initiator-decorated site, the teATRP-based strategy allows for the dual amplification of the detection signal. This dually amplified electrochemical aptasensor has the ability to sensitively and selectively detect endotoxin at a concentration as low as 1.2 fg/mL, and its practical applicability has been further demonstrated using human serum samples. Owing to the simplicity, high efficiency, biocompatibility, and inexpensiveness of the teATRP-based amplification strategy, this electrochemical aptasensor holds great application potential in the sensitive and selective detection of low-abundance endotoxin and many other glycan chain-containing bio-targets.

Ferritin-Enhanced Direct MicroRNA Detection via Controlled Radical Polymerization

Accurate quantitative detection of tracing nucleic acids remains a great challenge in cancer genetic testing. It is crucial to propose a low-cost and highly sensitive direct gene detection method for cancer prevention and treatment. Herein, this work reports an ultrasensitive biosensor via a ferritin-enhanced atom-transfer radical polymerization (Ft-ATRP) process. Intriguingly, microRNA-21, an early marker of lung cancer, can be detected without being transcribed in advance by an innovative signal amplification strategy using ferritin-mediated aggregation of hydrophilic nitroxide radical monomers as an electrochemical biosensor. The sensor uses peptide nucleic acid probes modified on a gold electrode to accurately bind the target lung cancer marker in the sample, and then ferritin, which is naturally present in human blood, induces Ft-ATRP on the electrode surface under mild conditions. Many of 4-methacryloyloxy-2,2,6,6-tetramethylpiperidine 1-oxyl free radical (MATMP) monomers with electrochemical signals are combined into polymeric chains to be modified on target assays. The limit of detection (LOD) of microRNA-21 is as low as 6.03 fM, and the detection concentration ranges from 0.01 to 100 pM (R² = 0.994). The RNA biosensor can realize great performance analysis of complicated samples in simple operation, in addition, the detection process used by the catalyst, polymers containing electrochemical signals, and the electrolyte solution all have good water solubility. The superior performance of the RNA biosensor demonstrates its potential to screen and identify lung cancer in target patients.

Boronate Affinity-Amplified Electrochemical Aptasensing of Lipopolysaccharide

As lipopolysaccharide (LPS) is closely associated with sepsis and other life-threatening conditions, the point-of-care (POC) detection of LPS is of significant importance to human health. In this work, we illustrate an electrochemical aptasensor for the POC detection of low-abundance LPS by utilizing boronate affinity (BA) as a simple, efficient, and cost-effective amplification strategy. Briefly, the BA-amplified electrochemical aptasensing of LPS involves the tethering of the aptamer receptors and the BA-mediated direct decoration of LPS with redox signal tags. As the polysaccharide chain of LPS contains hundreds of cis-diol sites, the covalent crosslinking between the phenylboronic acid group and cis-diol sites can be harnessed for the site-specific decoration of each LPS with hundreds of redox signal tags, thereby enabling amplified detection. As it involves only a single-step operation (∼15 min), the BA-mediated signal amplification holds the significant advantages of unrivaled simplicity, rapidness, and cost-effectiveness over the conventional nanomaterial- and enzyme-based strategies. The BA-amplified electrochemical aptasensor has been successfully applied to specifically detect LPS within 45 min, with a detection limit of 0.34 pg/mL. Moreover, the clinical utility has been validated based on LPS detection in complex serum samples. As a proof of concept, a portable device has been developed to showcase the potential applicability of the BA-amplified electrochemical LPS aptasensor in the POC testing. In view of its simplicity, rapidness, and cost-effectiveness, the BA-amplified electrochemical LPS aptasensor holds broad application prospects in the POC testing.

Electrochemically Controlled Atom Transfer Radical Polymerization for Electrochemical Aptasensing of Tumor Biomarkers

Tumor biomarkers are of great value in the liquid biopsy of malignant tumors. In this work, a simple and cost-friendly electrochemical aptasensor was presented for the highly sensitive and selective detection of glycoprotein tumor biomarkers. The DNA aptamer-modified electrode was used as the sensing interface to specifically capture the target glycoprotein tumor biomarkers, to which the alkyl halide initiators for atom transfer radical polymerization (ATRP) were then attached via the esterification crosslinking between the boronic acid group and the cis-dihydroxyl sites of the conjugated oligosaccharide chains on glycoprotein tumor biomarkers followed by the growth of long-chain polymers through electrochemically controlled ATRP (eATRP) to efficiently recruit the ferrocene detection tags. As there are tens to hundreds of cis-dihydroxyl sites on a glycoprotein tumor biomarker for attaching ATRP initiators while each long-chain polymer can recruit hundreds to thousands of ferrocene detection tags, a significantly high current signal can be generated even in the presence of ultralow-abundance targets. Hence, the eATRP-based electrochemical aptasensor is capable of sensitively and selectively detecting glycoprotein tumor biomarkers. Using alpha-fetoprotein as the model target, the limit of detection was demonstrated to be 0.32 pg/mL. Moreover, the aptasensor has been successfully applied to detect glycoprotein tumor biomarkers in human serum samples. In view of its high sensitivity and selectivity, simple operation, and cost-friendliness, the eATRP-based electrochemical aptasensor shows great promise in the glycoprotein-based liquid biopsy of malignant tumors, even at the early stage of development.

Electrochemical Detection of Femtomolar DNA via Boronate Affinity-Mediated Decoration of Polysaccharides with Electroactive Tags

In view of their high efficiency and cost-effectiveness, polymers are of great promise as carriers for signal tags in amplified detection. Herein, we present a polysaccharide-amplified method for the electrochemical detection of a BRCA1 breast cancer gene-derived DNA target at the femtomolar levels. Briefly, peptide nucleic acid (PNA) with a complementary sequence was tethered as the capture probe for the DNA target, to which carboxyl group-containing polysaccharides were then attached via facile phosphate-Zr(IV)-carboxylate crosslinking, followed by the decoration of polysaccharide chains with electroactive ferrocene (Fc) signal tags via affinity coupling between a cis-diol site and phenylboronic acid (PBA) group. As the polysaccharide chain contains hundreds of cis-diol sites, boronate affinity can enable the site-specific decoration of each polysaccharide chain with hundreds of Fc signal tags, efficiently transducing each target capture event into the decoration of many Fc signal tags. As polysaccharides are cheap, renewable, ubiquitous, and biodegradable natural biopolymers, the use of polysaccharides for signal amplification offers the benefits of high efficiency, cost-effectiveness, excellent biocompatibility, and environmental friendliness. The linear range of the polysaccharide-amplified method for DNA detection was demonstrated to be from 10 fM to 10 nM (R² = 0.996), with the detection limit as low as 2.9 fM. The results show that this method can also discriminate single base mismatch with satisfactory selectivity and can be applied to DNA detection in serum samples. In view of these merits, the polysaccharide-amplified PNA-based electrochemical method holds great promise in DNA detection with satisfactory sensitivity and selectivity.

Boronate-Affinity Cross-Linking-Based Ratiometric Electrochemical Detection of Glycoconjugates

Despite the widespread application of the boronate-affinity cross-linking (BAC) in the separation, enrichment, and sensing of glycoconjugates, it remains a huge challenge to integrate the BAC into the selective electrochemical detection of glycoconjugates due to the poor selectivity of the BAC. Herein, we demonstrate a BAC-based ratiometric electrochemical method for the simple, low-cost, and highly sensitive and selective detection of glycoconjugates. Briefly, the methylene blue (MB)-tagged nucleic acid aptamer is exploited as the recognition element to selectively capture target glycoconjugate, to which a large number of ferrocene (Fc) tags are subsequently labeled via the BAC between the phenylboronic acid (PBA) group and the cis-diol site of the oligosaccharide chains on the captured targets. Using the MB tag as the internal reference and the Fc tag as the reporter of the target capture, the dual-signal output enables the ratiometric detection. Due to the presence of a high density of the cis-diol sites on a glycoconjugate, sufficiently high sensitivity can be obtained even without using any amplification strategies. Using glycoprotein mucin 1 (MUC1) as the model target, the signal ratio (I_Fc/I_MB) exhibits good linearity over the range from 0.05 to 50 U/mL, with a detection limit of 0.021 U/mL. In addition to the high sensitivity and selectivity, the results of the analysis of MUC1 in serum samples are acceptable. By virtue of its simplicity, cost-effectiveness, and high robustness and reproducibility, this BAC-based ratiometric electrochemical method holds great promise in the highly sensitive and selective detection of glycoconjugates.

Sensitive electrochemiluminescence analysis of lung cancer marker miRNA-21 based on RAFT signal amplification

An electrochemiluminescence approach based on surface-initiated reversible addition-fragmentation chain transfer (SI-RAFT) was developed for miRNA-21 detection for the first time. The SI-RAFT polymerization generates polymer chains with functional groups that are used to recruit luminol, enabling strong ECL signal output with low concentrations of miRNA-21, and greatly improving the detection sensitivity.

In Situ Assembly of Nanomaterials and Molecules for the Signal Enhancement of Electrochemical Biosensors

The physiochemical properties of nanomaterials have a close relationship with their status in solution. As a result of its better simplicity than that of pre-assembled aggregates, the in situ assembly of nanomaterials has been integrated into the design of electrochemical biosensors for the signal output and amplification. In this review, we highlight the significant progress in the in situ assembly of nanomaterials as the nanolabels for enhancing the performances of electrochemical biosensors. The works are discussed based on the difference in the interactions for the assembly of nanomaterials, including DNA hybridization, metal ion-ligand coordination, metal-thiol and boronate ester interactions, aptamer-target binding, electrostatic attraction, and streptavidin (SA)-biotin conjugate. We further expand the range of the assembly units from nanomaterials to small organic molecules and biomolecules, which endow the signal-amplified strategies with more potential applications.

Bioinspired Electro-RAFT Polymerization for Electrochemical Sensing of Nucleic Acids

Sensing of ultralow-abundance nucleic acids (NAs) is integral to medical diagnostics and pathogen screening. We present herein an electrochemical method for the highly selective and amplified sensing of NAs, using a peptide nucleic acid (PNA) recognition probe and a bioinspired electro-RAFT polymerization (BERP)-based amplification strategy. The presented method is based on the recognition of target NAs by end-tethered PNA probes, the labeling of thiocarbonylthio reversible addition-fragmentation chain transfer (RAFT) agents, and the BERP-assisted growth of ferrocenyl polymers. The dynamic growth of polymers is electrochemically regulated by the reduction of 1-methylnicotinamide (MNA) organic cations, the redox center of nicotinamide adenine dinucleotide (NAD⁺, coenzyme I). Specifically, electroreduction of the MNA cations causes the fragmentation of thiocarbonylthio RAFT agents into radical species, triggering the polymerization of ferrocenyl monomers, thereby recruiting plenty of ferrocene electroactive tags for amplified sensing. It is obvious that the BERP-based strategy is inexpensive and simple in operation. Benefiting from the high specificity of the PNA recognition probe and the amplified signal by the BERP-based strategy, this method is highly selective and the detection limit is as low as 0.58 fM (S/N = 3). Besides, it is applicable to the sensing of NAs in serum samples, thus showing great promise in the selective and amplified sensing of NAs.

Grafting of polymers via ring-opening polymerization for electrochemical assay of alkaline phosphatase activity

As an important hydrolytic enzyme, abnormal activity of alkaline phosphatase (ALP) is closely associated with a variety of diseases. It has been identified as an important diagnostic indicator for clinical hepatobiliary and bone diseases. Herein, a novel electrochemical sensor based on signal amplification strategy through ring-opening polymerization (ROP) has been developed to assay of ALP activity. First of all, 3-mercaptopropanoic acid (MPA) was employed as a cross-linking agent to attach O-phosphoethanolamine to the electrode surface via amide bond. Then, ALP catalyzed the hydrolysis of phosphate monoester structures to hydroxyl groups, which could initiate ROP reaction. The polymer grafted on the electrode surface contains a large number of ferrocene electroactive molecules, which effectively increased the signal output of the electrochemical sensor and improved the sensitivity of ALP activity detection. Under optimum conditions, this electrochemical sensor rendered a satisfactory linear dependence over the range from 20 to 120 mU mL^-1, with a low detection limit of 0.66 mU mL^-1. Furthermore, this strategy presented satisfactory selectivity and interference resistance in human serum sample, and compared with clinical data, the relative error of the results obtained by this method was less than 5%. Thus, this method showed considerable potential for the detection of ALP activity in clinical application.

Application of peptide nucleic acid in electrochemical nucleic acid biosensors

The early diagnosis of major diseases, such as malignant tumors, has always been an important field of research. Through screening, early detection of such diseases, and timely and effective treatment can significantly improve the survival rate of patients and reduce medical costs. Therefore, the development of a simple detection method with high sensitivity and strong specificity, and that is low cost is of great significance for the diagnosis and prognosis of the disease. Electrochemical DNA biosensing analysis is a technology based on Watson Crick base complementary pairing, which uses the capture probe of a known sequence to specifically recognize the target DNA and detect its concentration. Because of its advantages of low cost, simple operation, portability, and easy miniaturization, it has been widely researched and has become a cutting-edge topic in the field of biochemical analysis and precision medicine. However, the existing methods for electrochemical DNA biosensing analysis have some shortcomings, such as poor stability and specificity of capture probes, insufficient detection sensitivity, and long detection cycles. In this review, we focus on improving the sensitivity and practicability of electrochemical DNA biosensing analysis methods and summarize a series of research work carried out by using electrically neutral peptide nucleic acid as an immobilized capture probe.

Coenzyme-Mediated Electro-RAFT Polymerization for Amplified Electrochemical Interrogation of Trypsin Activity

Trypsin is a key proteolytic enzyme in the digestive system and its abnormal levels are indicative of some pancreatic diseases. Taking advantage of the coenzyme-mediated electrografting of ferrocenyl polymers as a novel strategy for signal amplification, herein, a signal-on cleavage-based electrochemical biosensor is reported for the highly selective interrogation of trypsin activity at ultralow levels. The construction of the trypsin biosensor involves (i) the immobilization of peptide substrates (without free carboxyl groups) via the N-terminus, (ii) the tryptic cleavage of peptide substrates, (iii) the site-specific labeling of the reversible addition-fragmentation chain transfer (RAFT) agents, and (iv) the grafting of ferrocenyl polymers through the electro-RAFT (eRAFT) polymerization, which is mediated by potentiostatic reduction of nicotinamide adenine dinucleotide (NAD⁺) coenzymes. Through the NAD⁺-mediated eRAFT (NAD⁺-eRAFT) polymerization of ferrocenylmethyl methacrylate (FcMMA), the presence of a few tryptic cleavage events can eventually result in the recruitment of a considerable amount of ferrocene redox tags. Obviously, the NAD⁺-eRAFT polymerization is low-cost and easy to operate as a highly efficient strategy for signal amplification. As expected, the as-constructed biosensor is highly selective and sensitive toward the signal-on interrogation of trypsin activity. Under optimal conditions, the detection limit can be as low as 18.2 μU/mL (∼72.8 pg/mL). The results also demonstrate that the as-constructed electrochemical trypsin biosensor is applicable to inhibitor screening and the interrogation of enzyme activity in the presence of complex sample matrices. Moreover, it is low-cost, less susceptible to false-positive results, and relatively easy to fabricate, thus holding great potential in diagnostic and therapeutic applications.

Immobilization-free electrochemical DNA sensor based on signal cascade amplification strategy

The development of convenient and efficient strategies without using complex nanomaterials or enzymes for signal amplification is very important for bioanalytical applications. Herein, a novel electrochemical DNA sensor was developed by harnessing the signal amplification efficiency of catalytic hairpin assembly (CHA) and a brand-new signal marker tetraferrocene. The prepared sensor had both ends of the probe H2 labeled with tetraferrocene; both ends have a large number of unhybridized T bases, which cause tetraferrocene to move closer to the electrode surface, generating a high-efficiency amplification signal. In the presence of target DNA, it induced strand exchange reactions promoting the formation of double-stranded DNA and recycling of target DNA. Under optimal conditions, the sensor showed a good linear correlation between the peak currents and logarithm of target DNA concentrations (ranging from 0.1 fM to 0.3125 pM) with a detection limit of 0.06 fM, which is obtained by a triple signal-to-noise ratio. Additionally, the prepared sensor possesses excellent selectivity, reproducibility, and stability, demonstrating efficient and stable DNA detection methodology.

Electrochemistry for Atom Transfer Radical Polymerization

Atom Transfer Radical Polymerization (ATRP) is the most powerful and most employed technology of Controlled Radical Polymerization (CRP) to produce polymers with well-defined architecture, that is, composition, topology, and functionality. Several hundreds of papers are published every year on ATRP processes, mainly based on empiric experimental procedures. Electrochemistry powerfully entered in the field of ATRP about 10 years ago, providing important contributions both to the further development of the process and to a better understanding of its mechanism. Five main issues took advantage of electrochemistry and/or its synergism with ATRP: i) understanding the mechanism of ATRP activation; ii) determination of thermodynamic parameters; iii) determination of activation and deactivation rate constants; iv) the SARA ATRP vs SET-LRP dispute: the role of Cu⁰ ; v) electrochemically-mediated ATRP.

Electrochemical detection of alkaline phosphatase activity through enzyme-catalyzed reaction using aminoferrocene as an electroactive probe

As a nonspecific phosphomonoesterase, alkaline phosphatase (ALP) plays a pivotal role in tissue mineralization and osteogenesis which is an important biomarker for the clinical diagnosis of bone and hepatobiliary diseases. Herein, we described a novel electrochemical method that used aminoferrocene (AFC) as an electroactive probe for the ALP activity detection. In the condition with imidazole and N-(3-dimethylaminopropyl)-N'-ethylcarbodiimide hydrochloride (EDC), the AFC probe could be directly labeled on single-stranded DNA (ssDNA) by one-step conjugation. Specifically, thiolated ssDNA at 3'-terminals was modified to the electrode surface through Au-S bond. In the condition without ALP, AFC could be labeled on ssDNA by conjugating with phosphate groups. In the presence of ALP, phosphate groups were catalyzed to be removed from the 5'-terminal of ssDNA. The AFC probe cannot be labeled on ssDNA. Thus, the electrochemical detection of ALP activity was achieved. Under optimal conditions, the strategy presented a good linear relationship between current intensity and ALP concentration in the range of 20 to 100 mU/mL with the limit of detection (LOD) of 1.48 mU/mL. More importantly, the approach rendered high selectivity and satisfactory applicability for ALP activity detection. In addition, this method has merits of ease of operation, low cost, and environmental friendliness. Thus, this strategy presents great potential for ALP activity detection in practical applications. An easy, sensitive and reliable strategy was developed for the detection of alkaline phosphatase activity via electrochemical "Signal off".

Electrochemically Controlled ATRP for Cleavage-Based Electrochemical Detection of the Prostate-Specific Antigen at Femtomolar Level Concentrations

As a single-chain glycoprotein with endopeptidase activity, the prostate-specific antigen (PSA) is valuable as an informative serum marker in diagnosing, staging, and prognosis of prostate cancer. In this report, an electrochemical biosensor based on the target-induced cleavage of a specific peptide substrate (PSA peptide) is designed for the highly selective detection of PSA at the femtomolar level, using electrochemically controlled atom transfer radical polymerization (eATRP) as a method for signal amplification. The PSA peptides, without free carboxyl sites, are attached to the gold surface via the N-terminal cysteine residue. The target-induced cleavage of PSA peptides results in the generation of carboxyl sites, to which the alkyl halide initiator α-bromophenylacetic acid (BPAA) is linked via the Zr(IV) linkers. Subsequently, the potentiostatic eATRP of ferrocenylmethyl methacrylate (FcMMA, as the monomer) leads to the surface-initiated grafting of high-density ferrocenyl polymers. As a result, a large amount of Fc redox tags can be recruited for signal amplification, through which the limit of detection (LOD) for PSA can be down to 3.2 fM. As the recognition element, the PSA peptide is easy to synthesize, chemically and thermally stable, and low-cost. Without the necessity of enzyme or nanoparticle labels, the eATRP-based amplification method is easy to operate and low-cost. Results also show that the cleavage-based electrochemical PSA biosensor is highly selective and applicable to PSA detection in complex biological samples. In view of these merits, the integration of the eATRP-based amplification method into cleavage-based recognition is believed to hold great promise for the electrochemical detection of PSA in clinical applications.

Intramolecular photoinitiator induced atom transfer radical polymerization for electrochemical DNA detection

A novel electrochemical biosensor was reported for the first time to achieve highly sensitive DNA detection based on photoinduced atom transfer radical polymerization (photoATRP). In this work, PNA was applied as the capture probe to specifically recognize the target DNA (TDNA), and we utilized lung cancer DNA as TDNA. The ATRP initiator was introduced to the electrode surface via phosphate-Zr4+-carboxylate chemistry. PhotoATRP was activated under blue light irradiation based on a photoinitiator I2959, which produced free radicals via homolytic cleavage. Subsequently, Cu2+ was reduced to Cu+ with the assistance of the free radicals, and numerous electroactive probes were grafted onto the electrode surface. Under optimal conditions, the limit of detection (LOD) of this method was 3.16 fM (S/N = 3, R2 = 0.992), and the linear range was from 10 fM to 1.0 nM. More importantly, the preparation process of this biosensor was simple and less laborious with a low background signal, suggesting good potential in practical applications.

Nitronyl nitroxide monoradical TEMPO as new electrochemical label for ultrasensitive detection of nucleic acids

In this work, a novel electrochemical biosensor based on nitronyl nitroxide monoradical 2,2,6,6-tetramethylpiperidine 1-Oxyl (TEMPO) as new electrochemical label for facile nucleic acids detection is developed. This fast and convenient functional microelectrode was designed by fixing the capture probe peptide nucleic acid (PNA) and using the coordination interaction of Zr⁴⁺ with both phosphate groups and carboxyl groups. Differential pulse voltammetry (DPV) was used to study the oxidation current of TEMPO which was combined with the electrode surface and labeled. TEMPO electrochemical signal related to target deoxyribonucleic acid (tDNA) concentration was finally detected when tDNA was added on the surface of glassy carbon electrode (GCE). The detection principle, optimization of key factors and performance analysis of the biosensor are also discussed. A great linear relation is acquired within the scope of 10 pM-100 nM under optimal conditions and the detection limit of this experiment is calculated as low as 2.57 pM (R² = 0.996). In addition, complex serum samples were used to explore the practical application of this experiment. The results show the developed electrochemical DNA biosensor has wide application prospects in nucleic acids detection and clinical analysis.

Electrochemical CYFRA21-1 DNA sensor with PCR-like sensitivity based on AgNPs and cascade polymerization

In this work, a new method of CYFRA21-1 DNA (tDNA) detection based on electrochemically mediated atom transfer radical polymerization (e-ATRP) and surface-initiated reversible addition-fragmentation chain transfer polymerization (SI-RAFT) cascade polymerization and AgNP deposition is proposed. Firstly, the peptide nucleic acid (PNA) probe is captured on a gold electrode by Au-S bonds for specific recognition of tDNA. After hybridization, PNA/DNA strands provide high-density phosphate groups for the subsequent ATRP initiator by the identified carboxylate-Zr⁴⁺-phosphate chemistry. Then, a large number of monomers are successfully grafted from the DNA through the e-ATRP reaction. After that, the chain transfer agent of SI-RAFT and methacrylic acid (MAA) are connected by recognized carboxylate-Zr⁴⁺-carboxylate chemistry. Subsequently, through SI-RAFT, the resulting polymer introduces numerous aldehyde groups, which could deposit many AgNPs on tDNA through silver mirror reaction, causing significant amplification of the electrochemical signal. Under optimal conditions, this designed method exhibits a low detection limit of 0.487 aM. Moreover, the method enables us to detect DNA at the level of PCR-like and shows high selectivity and strong anti-interference ability in the presence of serum. It suggests that this new sensing signal amplification technology exhibits excellent potential of application in the early diagnosis of non-small cell lung cancer (NSCLC). Graphical abstract Electrochemical detection principle for CYFRA21-1 DNA based on e-ATRP and SI-RAFT signal amplification technology.

CuBr2/EDTA-mediated ATRP for ultrasensitive fluorescence detection of lung cancer DNA

In this paper, we reported a system for the ultrasensitive fluorescence detection of cytokeratin fragment antigen 21-1 DNA (CYFRA21-1 DNA) for the early diagnosis of lung cancer. The approach used electron transfer atom transfer radical polymerization (ARGET-ATRP) with ethylenediaminetetraacetic acid (EDTA) as the metal ligand. Firstly, thiolated peptide nucleic acid (PNA) was linked to aminated magnetic beads solutions (MBs) by a cross-linking agent and then hybridized with CYFRA21-1 DNA (tDNA). Subsequently, Zr4+ was introduced into the MBs by conjugating with the phosphate group of tDNA, and the initiator of ARGET-ATRP was introduced into via phosphate-Zr4+-carboxylate chemistry. Next, Cu(II)Br/EDTA was reduced to Cu(I)/EDTA by ascorbic acid (AA) to trigger ARGET-ATRP and then a large amount of fluorescein-o-acrylate (FA) molecules were grafted from the surface of the MBs, which amplified significantly the fluorescent signal. Under optimal conditions, a strong linear relationship of tDNA over the range from 0.1 fM to 1 nM (R2 = 0.9988). The limit of detection was as low as 23.8 aM (~143 molecules). The fluorescence detection based on the ARGET-ATRP strategy yielded excellent sensitivity, selectivity, outstanding anti-interference properties, and cost-effectiveness. These results indicated that this strategy has considerable potential for biological detection and early clinical diagnosis.

Dual atom transfer radical polymerization for ultrasensitive electrochemical DNA detection

Atom transfer radical polymerization as a form of controlled/living radical polymerization is particularly attractive. In this work, dual atom transfer radical polymerization (ATRP) is reported for ultrasensitive DNA detection. Firstly, a peptide nucleic acid (PNA) modified with a thiol group was self-assembled on an electrode surface to capture target DNA (TDNA). The initiator of the first ATRP (ATRP-1), α-bromoisobutyric acid (BIBA), was linked to forming PNA/DNA heteroduplexes via coordination of Zr⁴⁺. The polymer chain formed by the monomer of ATRP-1 (2-(2-bromoisobutyryloxy) ethyl methacrylate, BIEM) was also one of initiators of the second ATRP (eATRP-2). The other initiator of eATRP-2 was additional BIBA. ATRP-1 involves activator regeneration by electron transfer (ARGET) ATRP, regulated via excess reducing agent. eATRP-2 is electrochemically mediated ATRP which can control the polymerization via an appropriate applied potential. Compared with one ATRP, more monomers of eATRP-2 modified with ferrocene are attached to electrode surface. Under optimal conditions, this dual ATRP strategy provides a low limit of detection (25 aM, ~150 molecules) with satisfactory selectivity and stability. Importantly, this strategy presents a useful prospect for the field of biomolecule detection.

Metal-Free Photoinduced Atom Transfer Radical Polymerization for Highly Sensitive Detection of Lung Cancer DNA

Convenient and sensitive detection of biomolecules is of great significance to disease diagnosis. In this work, a metal-free photoinduced atom transfer radical polymerization (photoATRP) by a reductive quenching pathway as a novel strategy is applied to achieve lung cancer DNA detection. Thiolated PNA is exploited to specifically recognize target DNA, and the initiator of photoATRP is linked to the electrode surface via phosphate-Zr⁴⁺ -carboxylate. Under the excitation of blue light, the reductive quenching pathway is activated with eosin Y (EY) as photoredox catalyst and N,N,N',N'',N'-pentamethyldiethylenetriamine (PMDETA) as electron donor, and numerous polymeric chains are formed. Under optimal conditions, the linear range of this strategy is from 0.1 pm to 10 nm (R² =0.989) with a limit of detection (LOD) of 1.4 fm (14 zmol in 10 μL). The variety of possible light sources for photoATRP and simple operation endow this biosensor with great potential for practical applications.

Radical polymerization reactions for amplified biodetection signals

This review summarizes various radical polymerization chemistries for amplifying biodetection signals and compares them from the practical point of view.

Highly sensitive determination of DNA via a new type of electrochemical zirconium signaling probe

Exploiting Zr(iv) as a redox probe for the detection of DNA has great potential in clinical analysis.

Controlled/“living” radical polymerization-based signal amplification strategies for biosensing

Controlled/“living” radical polymerization-based signal amplification strategies and their applications in highly sensitive biosensing of clinically relevant biomolecules are reviewed.

A Fluorescent Sensor Based on Reversible Addition-Fragmentation Chain Transfer Polymerization for the Early Diagnosis of Non-small Cell Lung Cancer

We propose a novel, ultrasensitive and low-cost sensor using reversible addition-fragmentation chain transfer (RAFT) polymerization as a signal amplification strategy for the detection of CYFRA 21-1 DNA fragment, a tumor marker of non-small cell lung carcinoma. The peptide nucleic acid (PNA) probes were firstly immobilized on magnetic beads (MBs) to capture the CYFRA 21-1 DNA specifically. After hybridization, CPAD was tethered to the hetero duplexes through carboxylate-Zr⁴⁺-phosphate chemistry. Subsequently, a number of fluorescent tags were introduced to the heteroduplexes through RAFT polymerization, leading to an amplification of the fluorescence signal. The sensor demonstrates a low limit of detection (LOD) of 0.02 fM. It has great selectivity with respect to base mismatch DNA, and high anti-interference ability in normal human serum. Overall findings of the study suggest that proposed sensor holds enormous potential to be used as a tool for the early-stage diagnosis of lung cancers.

A dual signal amplification strategy combining thermally initiated SI-RAFT polymerization and DNA-templated silver nanoparticles for electrochemical determination of DNA

A highly sensitive method is described for determination of DNA. It is based on dual signal amplification, viz. (a)DNA-templated metal deposition, and (b) thermally initiated surface-initiated reversible addition-fragmentation chain transfer (SI-RAFT) polymerization. A peptide nucleic acid (PNA) with a terminal thiol group was grasped onto a gold electrode by self-assembly. The modified electrode serves as a probe to selectively capture target DNA (tDNA). In the next step, Zr(IV) ions are bound to the phosphate groups of the tDNA. A chain-transfer agent (CTA) for thermally initiated SI-RAFT polymerization, 4-cyano-4-(phenylcarbonothioylthio)pentanoic acid (CPAD), was immobilized on tDNA by conjugation of the carboxy group to Zr(IV) ions. Subsequently, numerous monomers of glycosyloxyethyl methacrylate (GEMA) were connected to the CPAD by thermally initiated SI-RAFT polymerization with azobisisobutyronitrile (AIBN) serving as the free-radical thermal initiator. Afterwards, hydroxyl groups of the GEMA were oxidized to aldehyde groups reacting with sodium periodate, and silver nanoparticles were further introduced on the surface of electrode via "silver mirror reaction". This results in a large electrochemical signal amplification. Under optimized conditions, the electrochemical signal (best measured at a working potential of 0 V vs. SCE (KCl; 3 M)) increases linearly with the logarithm of tDNA concentration in the 10 to 10⁶ aM concentration range. The detection limit is as low as 5.6 aM (~34 molecules in a 10 μL sample). This is lower by factors between 2 and 1800 times than detection limits of most other ultra-sensitive electrochemical DNA assays. Graphical abstractSchematic representation of a dual signal amplification strategy combining thermally initiated surface-initiated reversible addition-fragmentation chain transfer polymerization (SI-RAFT) and DNA-templated silver nanoparticles for electrochemical determination of DNA.

Dual signal amplification by polysaccharide and eATRP for ultrasensitive detection of CYFRA 21-1 DNA

Cytokeratin fragment antigen 21-1 (CYFRA 21-1) DNA is a crucial biomarker closely associated with non-small cell lung cancer. Here, we fabricated a novel electrochemical biosensor for ultrasensitive detection of CYFRA 21-1 DNA via polysaccharide and electrochemically mediated atom transfer radical polymerization (eATRP) dual signal amplification. Specifically, thiolated peptide nucleic acid (PNA) probes at 5'-terminals are immobilized on the gold electrode surface for specific recognition of CYFRA 21-1 DNA (tDNA). After hybridization, hyaluronic acid (HA) is linked to the hybridized PNA/DNA duplexes via the recognized carboxylate-Zr⁴⁺-phosphate chemistry. Then multiple initiators of the polymerization reaction are introduced via esterification reaction. Lastly, large numbers of electro-active monomers are successfully grafted from the initiation sites of functionalized HA by eATRP reaction, significantly amplifying the electrochemical signal. Under optimal conditions, the constructed sensor can detect as low as 9.04 aM tDNA. Further, this proposed biosensor can also be applied to the direct detection of double-stranded DNA (dsDNA), obtaining 0.12 fM as the detection limit. Besides, this strategy shows high selectivity for mismatched bases and excellent applicability for CYFRA 21-1 DNA detection in the serum samples. Given its high sensitivity, selectivity, ease of operation, low cost and environmental friendliness, this biosensor has considerable potential in early diagnosis and biomedical application.

F-containing initiatior for ultrasensitive fluorescent detection of lung cancer DNA via atom transfer radical polymerization

An ultrasensitive fluorescence method for early diagnosis of lung cancer via Nafion-initiated atom transfer radical polymerization (ATRP) is reported, in this paper. In the proposed method, thiolated peptide nucleic acid (PNA) is modified to amino magnetic beads (MBs) via a cross-linking agent to specifically capture target DNA (tDNA), and the initiator (Nafion) of ATRP is attached to PNA/DNA heteroduplexes based on the phosphate groups of the tDNA and sulfonate groups of Nafion via phosphate-Zr⁴⁺-sulfonate chemistry. Nafion as a macroinitiator of ATRP possesses multiple C-F active sites to initiate polymerization, and numerous polymeric chains that significantly amplify the fluorescent signal are formed. Under optimal conditions, a good linear relationship is obtained in the range of 0.1 nM-0.1 fM with correlation coefficients of 0.9975, and the detection limit is as low as 35.5 aM (∼214 molecules). The proposed strategy has several advantages of simplicity, cost-effectiveness, selectivity and sensitivity. More importantly, the anti-interference results demonstrate that the proposed Nafion-initiated ATRP strategy has great potential in bioanalytical applications.