Online Preconcentration in Capillaries by Multiple Large-Volume Sample Stacking: An Alternative to Immunoassays for Quantification of Amyloid Beta Peptides Biomarkers in Cerebrospinal Fluid

Advancements in Multiple-Step On-Line Preconcentration Techniques for Enhanced Sensitivity in Capillary Electrophoresis

Multiple-step on-line preconcentration, a combination of at least two stacking techniques has been developed to increase the sensitivity in capillary electrophoresis (CE) for analytes in various samples. It is usually conducted sequentially, or in some cases, synergistically, where different stacking modes occur simultaneously. Multiple-step techniques allow simultaneous preconcentration and separation of various kinds of analytes in different complex samples in a single CE run. This review aims to provide recent advances in multiple-step on-line preconcentration techniques in CE. We critically review technical papers published for the last 7 years up until July 2024, subsequently organized according to the combination of the main stacking techniques, that is, field amplification, large volume sample stacking, transient isotachophoresis, micelle to solvent or micelle to cyclodextrin stacking, and others. The procedures, fundamental mechanism, analytical figures of merits achieved, and their feasibility for complicated sample matrices are reviewed.

Investigation of on-line electrokinetic enrichment strategies for capillary electrophoresis of extracellular vesicles

This work explores strategies for electrokinetic preconcentration of extracellular vesicles (EVs) that are potential source of biomarkers for different diseases. The first approach that led to successful preconcentration of EVs is based on large volume sample stacking (LVSS), allowing an enrichment factor of 7 for CE of EVs with long-end injection (using a capillary with an effective length of 50 cm). Attempts were also made to perform multiple cycles of LVSS, field amplified sample stacking (FASS) and field amplified sample injection (FASI), to improve EVs preconcentration performance. The focus was then put on development of capillary isotachophoresis under high ionic strengths (IS) for electrokinetic enrichment of slow migrating EVs having heterogeneous mobilities. This approach relies on the use of extremely high concentrations of the terminating electrolyte (TE) to slow down the mobility of TE co-ions, rendering them slower than those of EVs. The limit of detection for intact EVs using the developed ITP-UV method reached 8.3 × 108 EVs/mL, allowing an enrichment of 25 folds and a linear calibration up to 4 × 1010 EVs/mL. The ITP-UV and ITP-LIF approaches were applied to provide the electrokinetic signature of EVs of bovine milk and human plasma as well as to visualize more specifically intravesicular fluorescently labelled EVs. The investigation of these strategies shredded light into the challenges still encountered with electrokinetic preconcentration and separation of heterogeneous EVs sub-populations which are discussed herein based on our results and other attempts reported in the literature.

On-line dual-stage enrichment via magneto-extraction and electrokinetic preconcentration: A new concept and instrumentation for capillary electrophoresis

This study reports on the development of a new concept of on-line dual preconcentration stages for capillary electrophoresis (CE), in which two completely different preconcentration approaches can be realized in the same capillary. In the first stage, a dynamic magneto-extraction of target analytes on circulating magnetic beads is implemented within the capillary. In the second one, electrokinetic preconcentration of eluted analytes via large volume sample stacking is carried out to focus them into a nano band, prior to CE separation of enriched analytes. To implement the dual-stage preconcentration operation, a purpose-made instrument was designed, combining electrophoretic and microfluidic modules to allow precise control of the movement of magnetic beads and analyte's flow. The potential of this new enrichment principle and its associated instrument was demonstrated for CE separation with light-emitting-diode-induced fluorescent (LEDIF) detection of target double-stranded DNA (ds-DNA). The workflow consists of purification and preconcentration of a target DNA fragment (300 bp) on negatively charged magnetic beads, followed by in-capillary elution and fluorescent labelling of the enriched DNA. Large volume sample stacking of the DNA eluent was then triggered to further preconcentrate the labelled DNA before its analysis by CE-LEDIF. An enrichment factor of 125 was achieved for the target DNA fragment. With our new approach, dual-stage sample pretreatment and CE separation can now be performed in-capillary without any mismatch of working volumes, nor any waste of pretreated samples.

Online large volume sample staking preconcentration and separation of enantiomeric GHRH analogs by capillary electrophoresis

A capillary electrophoresis method is proposed to analyze the four most well-known growth hormone-releasing hormone (GHRH) analogs that are misused by athletes. Dimethyl-β-cyclodextrin used as a chiral selector allowed, for the first time, the separation of those basic peptide analogs, including enantiopeptides (sermorelin and CJC-1293) that differ by the chirality of only one amino acid. To increase the method sensitivity, electrokinetic preconcentration methods have been investigated. The large volume sample stacking with polarity switching (PS-LVSS) method with an injected sample volume corresponding to 80% of the capillary one was found superior to the sweeping in terms of signal enhancement factor (SEF). Acid and organic solvent addition to the sample (0.1 mM phosphoric acid with 30% methanol) led to a twofold signal improvement, when compared to water as a matrix. We increased capillary dimensions to provide a signal enhancement through the injection of a larger sample volume. Finally, using a combination of the optimized PS-LVSS preconcentration with the chiral capillary zone electrophoresis (CZE), the GHRH analogs were separated and limits of detection between 75 and 200 ng/mL were reached. This method was successfully applied to urine after a desalting step. An optimized C18 SPE was used for that purpose in order to provide low sample conductivity (<130 µS/cm) and preserve the efficiency of LVSS preconcentration. SEF of 640 was obtained with desalted urine spiked with sermorelin by comparison to the CZE (without preconcentration) method.

A chemometric experimental design with three-step stacking capillary electrophoresis for analysis of five tobacco-specific nitrosamines in cigarette products

Tobacco-specific nitrosamines (TSNAs) as carcinogens endanger our health and life from cigarette products. However, the safe range of TSNAs levels in commercial cigarette products has not yet been established. For the purpose of safety and supervision, a three-step stacking approach including field amplified sample injection (FASI), sweeping, and analyte focusing by micelle collapse (AFMC), was developed for the simultaneous determination of five TSNAs levels in cigarette products. This approach also involved aspects of chemometric experimental design, including fractional factorial design and central composite design. After the multilevel optimization of the experimental design, the five TSNAs were well separated. The LOD (S/N = 3) values of the N´-nitrosonornicotine (NNN), N´-nitrosoanatabine (NAT), N´-nitrosoanabasine (NAB), 4-(methylnitrosamino)-1-(3-pyridyl)-1-butanol (NNAL), and 4-(methylnitrosamino)-1-(3-pyridyl)-1-butanone (NNK) in the FASI-sweeping-AFMC CE approach were 1.000 ng/mL, 0.500 ng/mL, 0.125 ng/mL, 1.000 ng/mL, and 0.500 ng/mL respectively. The results of relative standard deviation (RSD) and relative error (RE) were all less than 3.35%, demonstrating good precision and accuracy. Finally, this novel approach was further applied to monitor three commercial cigarette products, and a range of 250.1-336.6 ng/g for NNN, 481.6-526.7 ng/g for NAT, 82.2-247.6 ng/g for NAB, 167.7-473.7 ng/g for NNAL, and 39.4-246.7 ng/g for NNK could be observed among these. Based on these results, the novel CE stacking strategy was successfully applied for the analysis of five TSNAs levels in cigarette products and could serve as a tool for assays of quality control of nitrosamines.

High sensitivity capillary electrophoresis with fluorescent detection for glycan mapping

We present in this study a novel strategy to drastically improve the detection sensitivity and peak capacity for capillary electrophoresis with laser induced fluorescent detection (CE-LIF) of glucose oligomers and released glycans. This is based on a new approach exploiting a polymer-free background electrolyte (BGE) for CE-LIF of glycans. The best performance in terms of sample stacking and suppression of electroosmotic flow (EOF) was found for a BGE composed of triethanolamine/citric acid and triethanolamine/acetic acid at elevated ionic strengths (IS up to 200 mM). Compared to the conventional protocols for CE-LIF of glucose-oligosaccharides and released glycans, our polymer-free strategy offered up to 5-fold improvement of detection sensitivity and visualization of higher degree of polymerization (DP) of glucose oligomers (18 vs 15). To further improve the detection sensitivity, a new electrokinetic preconcentration strategy via large volume sample stacking with electroosmotic modulation without having recourse to neutrally coated capillaries is proposed, offering a 200-fold signal enhancement. This approach is based on variation of the buffer's IS, rather than pH adjustment as in conventional methods, for EOF modulation or quasi-total reduction. This strategy allows selecting with high flexibility the best pH conditions to perform efficient preconcentration and separation. The new approach was demonstrated to be applicable for the analysis of N-linked oligosaccharides released from a model glycoprotein (Human Immunoglobulin G) and applied to map N-glycans from human serum for congenital disorders of glycosylation (CDG) diagnosis.

Electroosmotic flow modulation for improved electrokinetic preconcentration: Application to capillary electrophoresis of fluorescent magnetic nanoparticles

It is reported in this study a new approach for modulation and even suppression of the electroosmotic flow (EOF) to achieve better electrokinetic preconcentration in capillary electrophoresis. This is based on the augmentation of the buffer's concentrations to very high levels (more than a thousand of mM) without recourse to any dynamic/permanent coating nor viscous gel. The use of large weakly charged molecules as background electrolyte's constituents allows working at extreme concentration ranges without penalty of high electric currents and Joule heating. By this way, the electroosmotic mobility could be modulated over a wide range (2-60 × 10^-5 cm² V^-1 s^-1 under alkaline conditions), and suppressed to levels equivalent to those obtained with several neutral coatings. The highest buffer concentrations, and the lowest EOF magnitudes, accordingly, were achieved with diethanolamine/3-(Cyclohexylamino)-1-propanesulfonic acid (ionic strength (IS) of 250 mM, pH 9.5), Tris(hydroxymethyl)aminomethane (Tris)/2-(Cyclohexylamino)ethanesulfonic acid (CHES) (IS of 280 mM, pH 8.7) and triethanolamine/2-(Cyclohexylamino)ethanesulfonic acid (IS of 250 mM, pH 8.5). For demonstration, this new approach was applied for sensitive determination of core-shell magnetic nanoparticles (CSMNPs) having high potential for healthcare applications such as imaging agents for diagnostics and controllable cargos for nanomedicine. Different profiles were achieved for purpose-made and commercial magnetic nanoparticles using CE coupled with light-emitting-diode induced fluorescence (LEDIF) detection. The best performance for EOF-assisted preconcentration and CE-LEDIF of CSMNPs was achieved with these nanoparticles prepared in TRIS/CHES (IS 10 mM, pH 8.4) for preconcentration, and separation under BGE of TRIS/CHES (IS 100 mM, pH 8.4). Compared to the conventional capillary electrophoresis (CE-UV) method for characterization of magnetic nanoparticles, our proposed approach with fluorescent detection and EOF-assisted preconcentration offers almost 350-fold sensitivity improvement. Furthermore, our scheme can be used for monitoring the interaction between CSMNPs and target pharmaceutical molecules, serving for drug delivery development. A preliminary study with two antibiotics using this approach revealed that kanamycin interacts better with the target nanoparticles than amikacin.

Model, Simulation, and Experiments on Moving Exchange Boundary via Ligand and Quantum Dots in Chip Electrophoresis

Herein, the quench model of the moving exchange boundary (MEB) was first created via a ligand of 5,5'-dithiobis(2-nitro-benzoic acid) (DTNB) and group of 3-mercaptopropionic acid (MPA) capped on QDs, and then the recovery model was formed via MPA and 2-nitro-5-thiobenzoic acid (TNB) capped on QDs. The theory on MEB dynamics and width was developed based on the two reversible models, the simulation was conducted for the illumination of MEB, and the protocol was described for the MEB runs. The experiments revealed that (i) the quench model could be created via DTNB and MPA capped on QDs and the recovery one could be in situ formed via MPA and TNB capped on QDs, showing the feasibility of MEB models; (ii) the simulations on MEB dynamics and width were in coincidence with the theoretic predictions, showing the validity of two models; and (iii) the experiments demonstrated the validity of models, predictions, and simulations. The models and theory have potential for development of a biosensor, nanoparticle characterization, separation science, and an affinity assay of ligand-QDs.

On a separation voltage polarity switching transient capillary isotachophoresis method for higher sample loading capacity and better separation performance

Limited sample loading capacity is one of the major reasons that prevents the utility of capillary electrophoresis (CE) as a routine separation method as compared to liquid chromatography (LC). In our previous study, separation voltage polarity switching transient capillary isotachophoresis (PS-tCITP) was proposed. Both sample loading capacity and separation resolution could be improved using a single PS-tCITP instead of routine transient capillary isotachophoresis (tCITP). In this study, a detailed investigation on the optimization strategy of the PS-tCITP method was performed systematically. A possible mechanism of sample preconcentration in multiple PS-tCITP was first proposed to better understand the multiple PS-tCITP process. Several optimization experiments were then performed, including single PS-tCITP, paused PS-tCITP and multiple PS-tCITP, sequentially using a mixture of five peptides. By selecting an optimum polarity switching time, sample loading capacity of 100% capillary volume could be achieved in a single PS-tCITP. Introducing an additional pause between each polarity switching in a single PS-tCITP further improved the separation resolution. Experimental results showed a baseline separation of five selected peptide standards at 100% sample loading volume using a 100 min pause in a single PS-tCITP. To further improve separation efficiency while still maintaining 100% sample loading volume, a multiple PS-tCITP technique was developed through this study. Compared to the separation performance of the optimal single PS-tCITP at 100% sample loading volume with a 10 min pause, the separation window was improved by 54% and the peak capacity was improved by 48% in the optimal four PS-tCITP with the same sample loading volume and pause.

Recent Electrokinetic and Microfluidic Strategies for Detection of Amyloid Beta Peptide Biomarkers: Towards Molecular Diagnosis of Alzheimer's Disease

Among all neurodegenerative diseases, Alzheimer's Disease (AD) is the most prevalent worldwide, with a huge burden to the society and no efficient AD treatment so far. Continued efforts have been being made towards early and powerful diagnosis of AD, in the hope for a successful set of clinical trials and subsequently AD curative treatment. Towards this aim, detection and quantification of amyloid beta (Aβ) peptides in cerebrospinal fluid (CSF) and other biofluids, which are established and validated biomarkers for AD, have drawn attention of the scientific community and industry over almost two decades. In this work, an overview on our major contributions over 15 years to develop different electrokinetic and microfluidic strategies for Aβ peptides detection and quantification is reported. Accordingly, discussions and viewpoints on instrumental and methodological developments for microscale electrophoresis, microfluidic designs and immuno-enrichment / assays on magnetic beads in microchannels for tracing Aβ peptides in CSF are given in this review.

Determination of sulfa antibiotic residues in river and particulate matter by field-amplified sample injection-capillary zone electrophoresis

In the present research, field-amplified sample injection-CZE (FASI-CZE) coupled with a diode array detector was established to determine trace level sulfa antibiotic. Sulfathiazole, sulfadiazine, sulfamethazine, sulfadimethoxine, sulfamethoxazole, and sulfisoxazole were selected as analytes for the experiments. The background electrolyte solution consisted of 70.0 mmol/L borax and 60.0 mmol/L boric acid (including 10% methanol, pH 9.1). The plug was 2.5 mmol/L borax, which was injected into the capillary at a pressure of 0.5 psi for 5 s. Then the sample was injected into the capillary at an injection voltage of -10 kV for 20 s. The electrophoretic separation was carried out under a voltage of +19 kV. The capillary temperature was maintained at 20˚C throughout the analysis, and six sulfonamides were completely separated within 35 min. Compared with pressure injection-CZE, the sensitivity of FASI-CZE was increased by 6.25-10.0 times, and the LODs were reduced from 0.2-0.5 to 0.02-0.05 μg/mL. The method was applied to the determination of sulfonamides in river water and particulate matter samples. The recoveries were 78.59-106.59%. The intraday and interday precisions were 2.89-7.35% and 2.77-7.09%, respectively. This provides a simpler and faster method for the analysis of sulfa antibiotic residues in environmental samples.

Antibody-free detection of amyloid beta peptides biomarkers in cerebrospinal fluid using capillary isotachophoresis coupled with mass spectrometry

This study reports a capillary isotachophoresis (ITP) - electrospray ionization mass spectrometry (ESI-MS) method for the determination of several amyloid β (Aβ) peptides, which are biomarkers of Alzheimer's disease (AD) in cerebrospinal fluids (CSF). For the first time, these peptides have been detected directly from CSF by MS without recourse to an immunocapture-based sample pre-treatment. The antibody-free approach is based on the marriage between capillary ITP, a powerful on-line electrokinetic preconcentration technique, and MS for simultaneous detection of different Aβ peptides. To ensure a good performance, the ITP process of fluorescently labelled Aβ peptides was for the first time implemented and verified with laser induced fluorescent detection, prior to methodology transfer to MS detection. Better detection sensitivity was achieved with labelled Aβ peptides for both detection modes. Using hydroxyl ions as the terminating and acetate as the leading ions, our method allows efficient ITP preconcentration under alkaline conditions of the slowly migrating Aβ peptides to reach quantifiable concentration down to 50 pM. The developed ITP-MS approach allows reliable quantification of different fluorescently derivatized Aβ peptides, i.e. Aβ 1-42, Aβ 1-40 and Aβ 1-38 down to sub nM ranges in CSF samples from AD and non-demented (healthy control) patients. Good agreement (<20% deviation) for the determination of Aβ 1-42/Aβ 1-40 ratio in CSF was achieved between results obtained with this new ITP-MS and our recently developed method based on large volume sample stacking coupled to CE. Discrimination of one AD patient from two healthy controls was successfully made with the Aβ 1-42/Aβ 1-40 ratio obtained by the developed ITP-MS method for the tested cerebrospinal fluid samples.

A separation voltage polarity switching method for higher sample loading capacity and better separation resolution in transient capillary isotachophoresis separation

A separation voltage polarity switching transient capillary isotachophoresis (PS-tCITP) was developed to overcome a major sample loading volume limitation in transient capillary isotachophoresis (tCITP). The fundamental idea of PS-tCITP is to let sample ions move back and forth in a separation capillary during their initial isotachophoresis focusing stage by switching the polarity of the separation voltage, in order to both increase the sample loading volume and improve the separation efficiency as compared to the conventional tCITP method. The experimental evaluation of the novel PS-tCITP method by using two peptide standards at 2 μM concentration showed that the maximum sample loading volume could be increased from 45% of the total separation capillary volume in tCITP to 70% in PS-tCITP, which resulted in a more than 1.5 fold increase in the peptide peak intensity at a given length/volume of the separation capillary. Due to the consecutive focusing of sample volume from each polarity switching of the separation voltage, the separation time window at a given sample loading volume was also increased significantly in PS-tCITP as compared to tCITP. Experiment comparison between tCITP and PS-tCITP at 45% sample loading volume using the same setup showed that the migration time difference between the two peptide peaks increased from 0.3 min in tCITP to 0.363 min in PS-tCITP with similar peak widths and heights, resulting in roughly a 21% improvement in separation resolution. The performance advantages of PS-tCITP separation over tCITP separation were further verified by using a mixture of six peptide standards.

Recent advances in enhancing the sensitivity of electrophoresis and electrochromatography in capillaries and microchips (2016-2018)

One of the most cited limitations of capillary and microchip electrophoresis is the poor sensitivity. This review continues to update this series of biannual reviews, first published in Electrophoresis in 2007, on developments in the field of online/in-line concentration methods in capillaries and microchips, covering the period July 2016-June 2018. It includes developments in the field of stacking, covering all methods from field-amplified sample stacking and large-volume sample stacking, through to isotachophoresis, dynamic pH junction, and sweeping. Attention is also given to online or in-line extraction methods that have been used for electrophoresis.

Recent progress of sample stacking in capillary electrophoresis (2016-2018)

Electrophoretic sample stacking comprises a group of capillary electrophoretic techniques where trace analytes from the sample are concentrated into a short zone (stack). This paper is a continuation of our previous reviews on the topic and brings a survey of more than 120 papers published approximately since the second quarter of 2016 till the first quarter of 2018. It is organized according to the particular stacking principles and includes chapters on concentration adjustment (Kohlrausch) stacking, on stacking techniques based on pH changes, on stacking in electrokinetic chromatography and on other stacking techniques. Where available, explicit information is given about the procedure, electrolyte(s) used, detector employed and sensitivity reached. Not reviewed are papers on transient isotachophoresis which are covered by another review in this issue.