Uranium(VI) On-Chip Microliter Concentration Measurements in a Highly Extended UV-Visible Absorbance Linearity Range

Quantification of Lanthanides on a PMMA Microfluidic Device with Three Optical Pathlengths Using PCR of UV-Visible, NIR, and Raman Spectroscopy

Microfluidic devices (MFDs) offer customizable, low-cost, and low-waste platforms for performing chemical analyses. Optical spectroscopy techniques provide nondestructive monitoring of small sample volumes within microfluidic channels. Optical spectroscopy can probe speciation, oxidation state, and concentration of analytes as well as detect counterions and provide information about matrix composition. Here, ultraviolet-visible (UV-vis) absorbance, near-infrared (NIR) absorbance, and Raman spectroscopy are utilized on a custom poly(methyl methacrylate) (PMMA) MFD for the detection of three lanthanide nitrates in solution. Absorbance spectroscopies are conducted across three pathlengths using three portions of a contiguous channel within the MFD. Univariate and chemometric multivariate modeling, specifically Beer's law regression and principal component regression (PCR), respectively, are utilized to quantify the three lanthanides and the nitrate counterion. Models are composed of spectra from one or multiple pathlengths. Models are also constructed from multiblock spectra composed of UV-vis, NIR, and Raman spectra at one or multiple pathlengths. Root-mean-square errors (RMSE), limit of detection (LOD), and residual predictive deviation (RPD) values are compared for univariate, multivariate, multi-pathlength, and multiblock models. Univariate modeling produces acceptable results for analytes with a simple signal, such as samarium cations, producing an LOD of 5.49 mM. Multivariate and multiblock models produce enhanced quantification for analytes that experience spectral overlap and interfering nonanalyte signals, such as holmium, which had an LOD reduction from 7.21 mM for the univariate model down to 3.96 mM for the multiblock model. Multi-pathlength models are developed that maintain model errors in line with single-pathlength models. Multi-pathlength models have RPDs from 9.18 to 46.4, while incorporating absorbance spectra collected at optical paths of up to 10-fold difference in length.

Dual-Enhancement Electrochemiluminescence Device for Ultratrace Uranium Visualized Monitoring in Fish, Hair, and Nail Samples

Uranium is a nuclear fuel but also a hazardous contaminant due to its radioactivity and chemical toxicity. To prevent and mitigate its potential threat, the accurate monitoring of ultratrace uranium (orders of magnitude of pg g-1) in practical environmental samples has become an important scientific problem. To meet this challenge, we developed an efficient electrochemiluminescence (ECL) UO22+ detection device by a novel dual-enhancement mechanism. In detail, poly[(9,9-dioctylfuor-enyl-2,7-diyl)-alt-co-(1,4-benzo-{2,1,3}-thiadiazole)] polymer dots (Pdots) are modified by the UO22+ DNA aptamer, and rhodamine B (RhB) is combined with dsDNA to quench the ECL signal via a resonance energy transfer (RET) process. UO22+ can cut off the DNA aptamer to release RhB, which generates an ECL enhancement process, and then, UO22+ continuously combines with the DNA chain, inducing another ECL enhancement by the RET process from UO22+ to Pdots. This device achieves an ultralow detection limit (12 pg L-1) and a wide linear range (113 pg L-1-11.3 mg L-1), which can successfully give accurate determination results to the ultratrace uranium in biosamples (<1 pg g-1) to monitor the uranium simulation of fish. This work presents an efficient strategy for ultratrace uranium determination in the environment, highlighting its significance in public health and environmental fields.

On-Chip Photonic Detection Techniques for Non-Invasive In Situ Characterizations at the Microfluidic Scale

Microfluidics has emerged as a robust technology for diverse applications, ranging from bio-medical diagnostics to chemical analysis. Among the different characterization techniques that can be used to analyze samples at the microfluidic scale, the coupling of photonic detection techniques and on-chip configurations is particularly advantageous due to its non-invasive nature, which permits sensitive, real-time, high throughput, and rapid analyses, taking advantage of the microfluidic special environments and reduced sample volumes. Putting a special emphasis on integrated detection schemes, this review article explores the most relevant advances in the on-chip implementation of UV-vis, near-infrared, terahertz, and X-ray-based techniques for different characterizations, ranging from punctual spectroscopic or scattering-based measurements to different types of mapping/imaging. The principles of the techniques and their interest are discussed through their application to different systems.

Application of Spectroscopy Techniques for Monitoring (Bio)Catalytic Processes in Continuously Operated Microreactor Systems

In the last twenty years, the application of microreactors in chemical and biochemical industrial processes has increased significantly. The use of microreactor systems ensures efficient process intensification due to the excellent heat and mass transfer within the microchannels. Monitoring the concentrations in the microchannels is critical for a better understanding of the physical and chemical processes occurring in micromixers and microreactors. Therefore, there is a growing interest in performing in-line and on-line analyses of chemical and/or biochemical processes. This creates tremendous opportunities for the incorporation of spectroscopic detection techniques into production and processing lines in various industries. In this work, an overview of current applications of ultraviolet–visible, infrared, Raman spectroscopy, NMR, MALDI-TOF-MS, and ESI-MS for monitoring (bio)catalytic processes in continuously operated microreactor systems is presented. The manuscript includes a description of the advantages and disadvantages of the analytical methods listed, with particular emphasis on the chemometric methods used for spectroscopic data analysis.

Microfluidic In-Situ Spectrophotometric Approaches to Tackle Actinides Analysis in Multiple Oxidation States

The study and development of present and future processes for the treatment/recycling of spent nuclear fuels require many steps, from design in the laboratory to setting up on an industrial scale. In all of these steps, analysis and instrumentation are key points. For scientific reasons (small-scale studies, control of phenomena, etc.) but also with regard to minimizing costs, risks, and waste, such developments are increasingly carried out on milli- or microfluidic devices. The logic is the same for the chemical analyses associated with their follow-up and interpretation. Due to this, over the last few years, opto-microfluidic analysis devices adapted to the monitoring of different processes (dissolution, liquid-liquid extraction, precipitation, etc.) have been increasingly designed and developed. In this work, we prove that photonic lab-on-a-chip (PhLoC) technology is fully suitable for all actinides concentration monitoring along the plutonium uranium refining extraction (plutonium, uranium, reduction, extraction, or Purex) process. Several PhLoC microfluidic platforms were specifically designed and used in different nuclear research and development (R&D) laboratories, to tackle actinides analysis in multiple oxidation states even in mixtures. The detection limits reached (tens of µmol·L^-1) are fully compliant with on-line process monitoring, whereas a range of analyzable concentrations of three orders of magnitude can be covered with less than 150 µL of analyte. Finally, this work confirms the possibility and the potential of coupling Raman and ultraviolet-visible (UV-Vis) spectroscopies at the microfluidic scale, opening the perspective of measuring very complex mixtures.

Microfluidic lab-on-a-chip characterization of nano- to microparticles suspensions by light extinction spectrometry

The analysis of nano- and microparticle suspensions with micro systems affords improved space-time yields, selectivity, reaction residence times and conversions capabilities. These capabilities are of primary importance in various fields of research and industry. The few microfluidic lab-on-a-chip approaches that have been developed are essentially designed to analyse fluid phases or involve the use of benchtop particle sizing instruments. We report a novel microscale approach to characterize the particle size distribution and absolute concentration of colloidal suspensions. The method is based on a photonic lab-on-a-chip with three scale-specific detection channels to record simultaneous light extinction spectra. Experiments carried out on particle standards with sizes ranging from 30 nm to 0.5 µm and volume concentrations of 1 to 1000ppm, clearly demonstrate the value and potential of the proposed method.

New optofluidic based lab-on-a-chip device for the real-time fluoride analysis

A PDMS (Polydimethylsiloxane) microfluidic channel coupled with UV-vis fibre-optic spectrometer and new synthesized colorimetric probe was integrated into an optofluidic based Lab-on-a-chip device for highly sensitive and real-time quantitative measurements of fluoride ions (F¯). An 'S' shaped microchannel in a microfluidic device was designed to act as microreactor to facilitate the continuous reaction between synthetized colorimetric probe (sensor) and F¯ ions. Following this reaction, the UV-vis optical probe in the downstream detection zone of the microfluidic device was used to capture their spectrum and present as F¯ concentration in real-time conditions. An initial study of the developed colorimetric probe with multi-colour change with several binding and chromophore groups such as -OH, -NH and -NO₂ groups confirmed its high sensitivity and selectivity for F¯ ions with a detection limit of 0.79 ppm. The performance of the developed optofluidic device was evaluated for the selective, sensitive detection of F¯ ions including real samples out-performing conventional methods. The technology has advantages such as low sample consumption, rapid analysis, high sensitivity and portability. Presented new Lab-on-a-chip device provides many competitive advantages for the real-time analysis of F¯ ions needed across broad sectors.

Raman Spectroscopy Coupled with Chemometric Analysis for Speciation and Quantitative Analysis of Aqueous Phosphoric Acid Systems

Complex chemical systems that exhibit varied and matrix-dependent speciation are notoriously difficult to monitor and characterize online and in real-time. Optical spectroscopy is an ideal tool for in situ characterization of chemical species that can enable quantification as well as species identification. Chemometric modeling, a multivariate method, has been successfully paired with optical spectroscopy to enable measurement of analyte concentrations even in complex solutions where univariate methods such as Beer's law analysis fail. Here, Raman spectroscopy is used to quantify the concentration of phosphoric acid and its three deprotonated forms during a titration. In this system, univariate approaches would be difficult to apply due to multiple species being present simultaneously within the solution as the pH is varied. Locally weighted regression (LWR) modeling was used to determine phosphate concentration from spectral signature. LWR results, in tandem with multivariate curve resolution modeling, provide a direct measurement of the concentration of each phosphate species using only the Raman signal. Furthermore, results are presented within the context of fundamental solution chemistry, including Pitzer equations, to compensate for activity coefficients and nonidealities associated with high ionic strength systems.

Enabling Microscale Processing: Combined Raman and Absorbance Spectroscopy for Microfluidic On-Line Monitoring

Microfluidics have many potential applications including characterization of chemical processes on a reduced scale, spanning the study of reaction kinetics using on-chip liquid-liquid extractions, sample pretreatment to simplify off-chip analysis, and for portable spectroscopic analyses. The use of in situ characterization of process streams from laboratory-scale and microscale experiments on the same chemical system can provide comprehensive understanding and in-depth analysis of any similarities or differences between process conditions at different scales. A well-characterized extraction of Nd(NO₃)₃ from an aqueous phase of varying NO_{3^- (aq)} concentration with tributyl phosphate (TBP) in dodecane was the focus of this microscale study and was compared to an earlier laboratory-scale study utilizing counter current extraction equipment. Here, we verify that this same extraction process can be followed on the microscale using spectroscopic methods adapted for microfluidic measurement. Concentration of Nd (based on UV-vis) and nitrate (based on Raman) was chemometrically measured during the flow experiment, and resulting data were used to determine the distribution ratio for Nd. Extraction distributions measured on the microscale were compared favorably with those determined on the laboratory scale in the earlier study. Both micro-Raman and micro-UV-vis spectroscopy can be used to determine fundamental parameters with significantly reduced sample size as compared to traditional laboratory-scale approaches. This leads naturally to time, cost, and waste reductions.

Compact integration of GaN-based photonic chip with microfluidics system

This Letter reports a demonstration of integrating a tiny GaN-based photonic chip with a PDMS microfluidics system. The photonic chip containing InGaN/GaN quantum wells is responsible for light emission and photodetection and fabricated through standard microfabrication techniques. The PDMS-enclosed chip is formed adjacent to the fluidic channel and operates in reflection mode, enabling the optical signals coupled into and out of the fluidic channel without the aid of external optics. The luminescence and photo-detecting properties are thoroughly characterized, confirming that the chip is capable of tracking the continuously flowing microdroplets with the changes of absorbance, length, and flow rate. The novel, to the best of our knowledge, photonic integration presented in this Letter is a significant step forward in the development of compact, miniature, and self-contained on-chip sensing systems, which are of great value in portable lab-on-a-chip applications.

Online Monitoring of Solutions Within Microfluidic Chips: Simultaneous Raman and UV-Vis Absorption Spectroscopies

Microfluidics is an appealing analytical tool in the global effort to close the nuclear fuel cycle. Using a microfluidic chip permits the analysis of greatly reduced sample volumes compared to what is necessary for traditional analytical methods. There is a commensurate reduction in disposal volume and cost. The development of novel sensors is necessary to take full advantage of the microchip configuration, where optical-spectroscopy-based approaches offer a powerful route to characterize chemical composition. This study uses simultaneously applied UV-vis and micro-Raman spectroscopies adapted to function on the microscale to analyze in situ both the Nd³⁺ (UV-vis-active) and HNO₃ (Raman-active) concentrations in the same sample. An adjustable translation platform was designed to hold the micro-Raman probe above and perpendicular to the chip face and the UV-vis probe in the plane of the chip. These complimentary spectral techniques when processed through multivariate partial least-squares (PLS) models gave an accurate picture of the widely varying solution concentrations as a function of time for each solution component. Solution matrix effects can drastically alter analyte signatures as measured by both UV-vis absorbance and Raman spectroscopy. PLS methods successfully modeled these spectral changes and accurately measured concentrations of components of interest within the microfluidic chip.