Evaluation of Alkylamine Modified Pt Nanoparticles as Oxygen Reduction Reaction Electrocatalyst for Fuel Cells via Electrochemical Impedance Spectroscopy

A robust inorganic binder against corrosion and peel-off stress in electrocatalysis

Electrochemical binders used to immobilize electrocatalysts on electrodes are essential in all fields of electrochemistry. However, conventional organic-based binders like Nafion generally suffer from oxidative decomposition at high potentials on anodic electrodes and have high charge transport resistivity. This work proposes the use of acidic redox-assisted deposition to form cobalt manganese oxyhydroxides (CMOH) as a solid-state inorganic binder. CMOH remains stable under high oxidative currents and ensures catalyst adhesion even under significant peel-off stress as shown by experiments involving the alkaline oxygen evolution reaction (OER) using RuO2 as a catalyst immobilized on a rotating disc electrode. While the molecular structure of Nafion decays significantly after 45 minutes under OER conditions at 3.86 V, the CMOH binder is able to support the powder catalysts (RuO2 and NiO x ) showing stability around 1000 mA cm-2 without significant current decay over 24 hours. The robust catalyst adhesion is a result of the formation of chemical bonds between the electrode and the binder and it can be further improved by increasing the applied loading of CMOH. Unlike Nafion, both the OER activity and the diffusion kinetics are not significantly affected by the CMOH binder. It has also been shown that using CMOH as a binder leads to lower charge transfer resistances R ct and higher electrochemical surface areas compared to systems using Nafion. This is partially due to the presence of metal sites in different oxidation states which has been shown to increase intrinsic conductivity, facilitating the charge hopping at the binder/electrocatalyst interface. With this, the present work provides a proof-of-concept for inorganic metal oxides as promising solid-state binders for a wide range of applications in electrochemistry, demonstrating CMOH's outstanding characteristic of strong adhesion to support other highly active but adhesion-weak electrocatalysts.

A hydrogen sulfide photoelectrochemical sensor based on BiVO4/Fe2O3 heterojunction

A BiVO4/Fe2O3 heterojunction for non-enzymatic photoelectrochemical (PEC) determination of hydrogen sulfide (H2S) is reported. The BiVO4/Fe2O3 heterojunction promoted the separation of photo-generated carriers, reduced electron-hole recombination, and thus improved electron collection and photocurrent. The proposed BiVO4/Fe2O3/FTO sensor exhibited a linear range of 1-500 μM and a detection limit of 0.51 nM H2S. In addition, high selectivity, good reproducibility, and stability were obtained for H2S sensing. The detection of H2S in water and serum samples demonstrated its feasibility. This work provides a new strategy to detect and understand the bio-function of H2S in the biological environment.

A new In Situ Oxidized 2D Layered MnBi2Te4 Cathode for High-Performance Aqueous Zinc-Ion Battery

Recently, aqueous zinc ion batteries (AZIBs) with the superior theoretical capacity, high safety, low prices, and environmental protection, have emerged as a contender for advanced energy storage. However, challenges related to cathode materials, such as dissolution, instability, and structural collapse, have hindered the progress of AZIBs. Here, a novel AZIB is constructed using an oxidized 2D layered MnBi2Te4 cathode for the first time. The oxidized MnBi2Te4 cathode with large interlayer spacing and low energy barrier for zinc ion diffusion at 240 °C, exhibited impressive characteristics, including a high reversibility capacity of 393.1 mAh g-1 (0.4 A g-1), outstanding rate performance, and long cycle stability. Moreover, the corresponding aqueous button cell also exhibits excellent electrochemical performance. To demonstrate the application in practice in the realm of flexible wearable electronics, a quasi-solid-state micro ZIB (MZIB) is constructed and shows excellent flexibility and high-temperature stability (the capacity does not significantly degrade when the temperature reaches 100 °C and the bending angle exceeds 150°). This research offers effective tactics for creating high-performance cathode materials for AZIBs.

In situ Activation of Molecular Oxygen at Intermetallic Spacing-Optimized Iron Network-Like Sites for Boosting Electrocatalytic Oxygen Reduction

The oxygen reduction reaction (ORR) catalyzed by transition-metal single-atom catalysts (SACs) is promising for practical applications in energy-conversion devices, but great challenges still remain due to the sluggish kinetics of O═O cleavage. Herein, a kind of high-density iron network-like sites catalysts are constructed with optimized intermetallic distances on an amino-functionalized carbon matrix (Fe-HDNSs). Quasi-in situ soft X-ray absorption spectroscopy and in situ synchrotron infrared characterizations demonstrate that the optimized intermetallic distances in Fe-HDNSs can in situ activate the molecular oxygen by fast electron compensation through the hybridized Fe 3d‒O 2p, which efficiently facilitates the cleavage of the O═O bond to *O species and highly suppresses the side reactions for an accelerated kinetics of the 4e- ORR. As a result, the well-designed Fe-HDNSs catalysts exhibit superior performances with a half-wave potential of 0.89 V versus reversible hydrogen electrode (RHE) and a kinetic current density of 72 mA cm-2@0.80 V versus RHE, exceeding most of the noble-metal-free ORR catalysts. This work offers some new insights into the understanding of 4e- ORR kinetics and reaction pathways to boost electrochemical performances of SACs.

Carbonized Polydopamine-Based Nanocomposites: The Effect of Transition Metals on the Oxygen Electrocatalytic Activity

The electrochemical oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) are the most critical processes in renewable energy-related technologies, such as fuel cells, water electrolyzers, and unitized regenerative fuel cells. N-doped carbon composites have been demonstrated to be promising ORR/OER catalyst candidates because of their excellent electrical properties, tunable pore structure, and environmental compatibility. In this study, we prepared porous N-doped carbon nanocomposites (NC) by combining mussel-inspired polydopamine (PDA) chemistry and transition metals using a solvothermal carbonization strategy. The complexation between dopamine catechol groups and transition metal ions (Fe, Ni, Co, Zn, Mn, Cu, and Ti) results in hybrid structures with embedded metal nanoparticles converted to metal-NC composites after the carbonization process. The influence of the transition metals on the structural, morphological, and electrochemical properties was analyzed in detail. Among them, Cu, Co, Mn, and Fe N-doped carbon nanocomposites exhibit efficient catalytic activity and excellent stability toward ORR. This method improves the homogeneous distribution of the catalytically active sites. The metal nanoparticles in reduced (MnO, Fe₃C) or metallic (Cu, Co) oxidation states are protected by the N-doped carbon layers, thus further enhancing the ORR performance of the composites. Still, only Co nanocomposite is also effective toward OER with a potential bifunctional gap (ΔE) of 0.867 V. The formation of Co-N active sites during the carbonization process, and the strong coupling between Co nanoparticles and the N-doped carbon layer could promote the formation of defects and the interfacial electron transfer between the catalyst surface, and the reaction intermediates, increasing the bifunctional ORR/OER performance.

Laser-Accelerated Mass Transport in Oxygen Reduction Via a Graphene-Supported Silver-Iron Oxide Heterojunction

Mass-transport acceleration is essential toward enhanced electrocatalytic performance yet rarely recognized under irradiation, because light is usually reported to improve charge transfer. We studied laser-enhanced mass transport through the heterojunction between Ag and semiconductor Fe₂O₃ situated on graphene for oxygen reduction reaction. Because of the decreased mass-transport resistance by 59% under 405 nm laser irradiation, the current density can be enhanced by 180%, which is also supported by a theoretical calculation. This laser-enhanced mass transport was attributed to local photothermal heating and the near-field local enhancement. Easier desorption of OH^- species occurring between the Fe and Ag centers under the laser accelerates the mass-transport centers.

Electrocatalyst Design for Conversion of Energy Molecules: Electronic State Modulation and Mass Transport Regulation

Electrocatalytic conversions of energy molecules are involved in many energy conversion processes. Improving the activity of electrocatalyst is critical for increasing the efficiency of these energy conversion processes. However, the...

Tuning the Covering on Gold Surfaces by Grafting Amino-Aryl Films Functionalized with Fe(II) Phthalocyanine: Performance on the Electrocatalysis of Oxygen Reduction

Current selective modification methods, coupled with functionalization through organic or inorganic molecules, are crucial for designing and constructing custom-made molecular materials that act as electroactive interfaces. A versatile method for derivatizing surfaces is through an aryl diazonium salt reduction reaction (DSRR). A prominent feature of this strategy is that it can be carried out on various materials. Using the DSRR, we modified gold surface electrodes with 4-aminebenzene from 4-nitrobenzenediazonium tetrafluoroborate (NBTF), regulating the deposited mass of the aryl film to achieve covering control on the electrode surface. We got different degrees of covering: monolayer, intermediate, and multilayer. Afterwards, the ArNO₂ end groups were electrochemically reduced to ArNH₂ and functionalized with Fe(II)-Phthalocyanine to study the catalytic performance for the oxygen reduction reaction (ORR). The thickness of the electrode covering determines its response in front of ORR. Interestingly, the experimental results showed that an intermediate covering film presents a better electrocatalytic response for ORR, driving the reaction by a four-electron pathway.

High-performance non-enzymatic biofuel cells based on an organic copper complex cathode and a nanoporous gold nanoparticle anode

We developed non-enzymatic biofuel cells based on organic copper complex and nanoporous gold nanoparticle electrocatalysts in a neutral medium.