Nanoplasmonic Sensing from the Human Vision Perspective

Colorimetric sensing for translational applications: from colorants to mechanisms

Colorimetric sensing offers instant reporting via visible signals. Versus labor-intensive and instrument-dependent detection methods, colorimetric sensors present advantages including short acquisition time, high throughput screening, low cost, portability, and a user-friendly approach. These advantages have driven substantial growth in colorimetric sensors, particularly in point-of-care (POC) diagnostics. Rapid progress in nanotechnology, materials science, microfluidics technology, biomarker discovery, digital technology, and signal pattern analysis has led to a variety of colorimetric reagents and detection mechanisms, which are fundamental to advance colorimetric sensing applications. This review first summarizes the basic components (e.g., color reagents, recognition interactions, and sampling procedures) in the design of a colorimetric sensing system. It then presents the rationale design and typical examples of POC devices, e.g., lateral flow devices, microfluidic paper-based analytical devices, and wearable sensing devices. Two highlighted colorimetric formats are discussed: combinational and activatable systems based on the sensor-array and lock-and-key mechanisms, respectively. Case discussions in colorimetric assays are organized by the analyte identities. Finally, the review presents challenges and perspectives for the design and development of colorimetric detection schemes as well as applications. The goal of this review is to provide a foundational resource for developing colorimetric systems and underscoring the colorants and mechanisms that facilitate the continuing evolution of POC sensors.

Distinguishable Colorimetric Biosensor for Diagnosis of Prostate Cancer Bone Metastases

Castration-resistant prostate cancer (PCa) causes severe bone metastasis (BM), which significantly increases mortality in men with PCa. Imaging tests and radiometric scanning require long analysis times, expensive equipment, specialized personnel, and a slow turnaround. New visualization technologies are expected to solve the above problems. Nonetheless, existing visualization techniques barely meet the urgency for precise diagnosis because the human eyes cannot recognize and capture even slight variations in visual information. By using dye differentiated superposition enhancement colorimetric biosensors, an effective method to diagnose prostate cancer bone metastases (PCa-BM) with excellent accuracy for naked-eye quantitative detection of alkaline phosphatase (ALP) is developed. The biomarker ALP specific hydrolytic product ascorbic acid can be detected by rhodamine derivatives (Rd) as gold nanobipyramids (Au NBPs) are deposited and grown. Color-recombining enhancement effects between Rd and Au NBPs significantly improved abundance. The 150 U L-1 threshold between normal and abnormal can be identified by color. And with color enhancement effect and double signal response, the ALP index is visually measured to diagnose PCa-BM and provide handy treatment recommendations. Additionally, the proposed colorimetric sensing strategy can be used to diagnose other diseases.

Direct detection of neuron-specific enolase using a spectrometer-free colorimetric plasmonic biosensor

Sensitive detection of a tumor marker, neuron-specific enolase (NSE), was performed by a label-free direct immunoassay based on a colorimetric plasmonic biosensor. Reflective plasmonic colors of silver nanodome arrays provided a way for a sensitive refractive index sensor based on spectrometer-free colorimetric detection. The direct detection of NSE was demonstrated by a combination of a sensitive sensor substrate and image processing. The limit of detection (LOD) for NSE was determined to be 270 pM, which is lower than the clinical threshold value of NSE used for medical diagnostics of small-cell lung cancer. Since our substrate-based colorimetric plasmonic biosensor is compatible with smartphone detection, we believe that the presented biosensor will open up a way for biosensor technology for point-of-care testing as well as mobile health applications.

An achromatic colorimetric nanosensor for sensitive multiple pathogen detection by coupling plasmonic nanoparticles with magnetic separation

Rapid screening of multiple pathogens will greatly improve the efficiency of pandemic prevention and control. Colorimetric methods exhibit the advantages of convenience, portability, low cost, time efficiency, and free of sophisticated instruments, yet usually have difficulties in simultaneous detection and suffer from monotonous color changes with low visual resolution and sensitivity. Hence, coupled three kinds of plasmonic nanoparticles (NPs) with magnetic separation, we developed an achromatic colorimetric nanosensor with highly enhanced visual resolution for simultaneous detection of SARS-CoV-2, Staphylococcus aureus, and Salmonella typhimurium. The achromatic nanosensor was composed of SARS-CoV-2-targeting red gold NPs, S. aureus-targeting yellow silver NPs and S. typhimurium-targeting blue silver triangle NPs mixed as black color. In the detection, three corresponding magnetic probes were added into the above mixture. In the presence of a target pathogen, it would be recognized and combined with corresponding colored reporters and magnetic probes to form sandwich complexes, which were removed by magnetic separation, and the sensor changed from black to a chromatic color (the color of the reporters remained in supernatant). Consequently, different target pathogen induced different color. For example, SARS-CoV-2, S. aureus, and S. typhimurium respectively produced green, purple, and orange. While coexistence of S. aureus and S. typhimurium produced red, and coexistence of S. aureus and SARS-CoV-2 produced blue, etc. Therefore, by observing the color change or measuring the absorption spectra, multiple pathogen detection was achieved conveniently. Compared with most colorimetric sensors, this achromatic nanosensor involved rich color change, thus significantly enhancing visual resolution and inspection sensitivity. Therefore, this sensor opened a promising avenue for efficient monitoring and early warning of food safety and quality.

Empirical Optimization of Peptide Sequence and Nanoparticle Colloidal Stability: The Impact of Surface Ligands and Implications for Colorimetric Sensing

Surface ligands play a critical role in controlling and defining the properties of colloidal nanocrystals. These aspects have been exploited to design nanoparticle aggregation-based colorimetric sensors. Here, we coated 13-nm gold nanoparticles (AuNPs) with a large library of ligands (e.g., from labile monodentate monomers to multicoordinating macromolecules) and evaluated their aggregation propensity in the presence of three peptides containing charged, thiolate, or aromatic amino acids. Our results show that AuNPs coated with the polyphenols and sulfonated phosphine ligands were good choices for electrostatic-based aggregation. AuNPs capped with citrate and labile-binding polymers worked well for dithiol-bridging and π-π stacking-induced aggregation. In the example of electrostatic-based assays, we stress that good sensing performance requires aggregating peptides of low charge valence paired with charged NPs with weak stability and vice versa. We then present a modular peptide containing versatile aggregating residues to agglomerate a variety of ligated AuNPs for colorimetric detection of the coronavirus main protease. Enzymatic cleavage liberates the peptide segment, which in turn triggers NP agglomeration and thus rapid color changes in <10 min. The protease detection limit is 2.5 nM.

CRISPR-Cas12a coupled with universal gold nanoparticle strand-displacement probe for rapid and sensitive visual SARS-CoV-2 detection

Point of care (POC) diagnosis of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) are particularly significant for preventing transmission of coronavirus disease 2019 (COVID-19) by any user at any given time and place. CRISPR/Cas-assisted SARS-CoV-2 assays are viewed as supplemental to RT-PCR due to simple operation, convenient use and low cost. However, most current CRISPR molecular diagnostics based on fluorescence measurement increased the difficulty of POC test with need of the additional light sources. Some instrument-free visual detection with the naked eye has limitations in probe universality. Herein, we developed a universal, rapid, sensitive and specific SARS-CoV-2 POC test that combines the outstanding DNase activity of Cas12a with universal AuNPs strand-displacement probe. The oligo trigger, which is the switch the AuNPs of the strand-displacement probe, is declined as a result of Cas12a recognition and digestion. The amount of released AuNPs produced color change which can be visual with the naked eye and assessed by UV-Vis spectrometer for quantitative detection. Furthermore, a low-cost hand warmer is used as an incubator for the visual assay, enabling an instrument-free, visual SARS-CoV-2 detection within 20 min. A real coronavirus GX/P2V instead of SARS-CoV-2 were chosen for practical application validation. After rapid virus RNA extraction and RT-PCR amplification, a minimum of 2.7 × 10² copies/mL was obtained successfully. The modular design can be applied to many nucleic acid detection applications, such as viruses, bacteria, species, etc., by simply modifying the crRNA, showing great potential in POC diagnosis.

Peptide Amphiphile Mediated Co-assembly for Nanoplasmonic Sensing

Aromatic interactions are commonly involved in the assembly of naturally occurring building blocks, and these interactions can be replicated in an artificial setting to produce functional materials. Here we describe a colorimetric biosensor using co-assembly experiments with plasmonic gold and surfactant-like peptides (SLPs) spanning a wide range of aromatic residues, polar stretches, and interfacial affinities. The SLPs programmed in DDD-(ZZ)x -FFPC self-assemble into higher-order structures in response to a protease and subsequently modulate the colloidal dispersity of gold leading to a colorimetric readout. Results show the strong aggregation propensity of the FFPC tail without polar DDD head. The SLPs were specific to the target protease, i.e., Mpro , a biomarker for SARS-CoV-2. This system is a simple and visual tool that senses Mpro in phosphate buffer, exhaled breath condensate, and saliva with detection limits of 15.7, 20.8, and 26.1 nM, respectively. These results may have value in designing other protease testing methods.

Plasma-induced nanoparticle aggregation for stratifying COVID-19 patients according to disease severity

Stratifying patients according to disease severity has been a major hurdle during the COVID-19 pandemic. This usually requires evaluating the levels of several biomarkers, which may be cumbersome when rapid decisions are required. In this manuscript we show that a single nanoparticle aggregation test can be used to distinguish patients that require intensive care from those that have already been discharged from the intensive care unit (ICU). It consists of diluting a platelet-free plasma sample and then adding gold nanoparticles. The nanoparticles aggregate to a larger extent when the samples are obtained from a patient in the ICU. This changes the color of the colloidal suspension, which can be evaluated by measuring the pixel intensity of a photograph. Although the exact factor or combination of factors behind the different aggregation behavior is unknown, control experiments demonstrate that the presence of proteins in the samples is crucial for the test to work. Principal component analysis demonstrates that the test result is highly correlated to biomarkers of prognosis and inflammation that are commonly used to evaluate the severity of COVID-19 patients. The results shown here pave the way to develop nanoparticle aggregation assays that classify COVID-19 patients according to disease severity, which could be useful to de-escalate care safely and make a better use of hospital resources.

Gold-Silver Core-Shell Nanoparticle Crosslinking Mediated by Protease Activity for Colorimetric Enzyme Detection

Plasmonic nanoparticles produce a localized surface plasmon resonance (LSPR) under optical excitation. The LSPR of nanoparticles can shift in response to changes in the local dielectric environment and produce a color change. This color change can be observed by the naked eye due to the exceptionally large extinction coefficients (10⁸-10¹¹ M^-1 cm^-1) of plasmonic nanoparticles. Herein, we investigate the optical shifts (i.e., color change) of three unique gold-silver core-shell nanoparticle structures in response to changes in their dielectric environment upon nanoparticle aggregation. Aggregation is induced by a cysteine-containing peptide that has a sulfhydryl near its N and C termini, which crosslinks nanoparticles. Furthermore, we demonstrate that adding proline spacers between the cysteines impacts the degree of aggregation and, ultimately, the color response. Using this information, we construct a colorimetric enzyme assay, where the signal produced from nanoparticle aggregation is modulated by proteolysis. The degree of aggregation and the resulting optical shift can be correlated with enzyme concentration with high linearity (R² = 0.998). Overall, this study explores the optical properties of gold-silver core-shell nanoparticles in a dispersed vs aggregated state and leverages that information to develop an enzyme sensor with a spectral LOD of 0.47 ± 0.09 nM.

Peptidic Sulfhydryl for Interfacing Nanocrystals and Subsequent Sensing of SARS-CoV-2 Protease

There is a need for surveillance of COVID-19 to identify individuals infected with SARS-CoV-2 coronavirus. Although specific, nucleic acid testing has limitations in terms of point-of-care testing. One potential alternative is the nonstructural protease (nsp5, also known as Mpro/3CLpro) implicated in SARS-CoV-2 viral replication but not incorporated into virions. Here, we report a divalent substrate with a novel design, (Cys)2-(AA)x-(Asp)3, to interface gold colloids in the specific presence of Mpro leading to a rapid and colorimetric readout. Citrate- and tris(2-carboxyethyl)phosphine (TCEP)-AuNPs were identified as the best reporter out of the 17 ligated nanoparticles. Furthermore, we empirically determined the effects of varying cysteine valence and biological media on the sensor specificity and sensitivity. The divalent peptide was specific to Mpro, that is, there was no response when tested with other proteins or enzymes. Furthermore, the Mpro detection limits in Tris buffer and exhaled breath matrices are 12.2 and 18.9 nM, respectively, which are comparable to other reported methods (i.e., at low nanomolar concentrations) yet with a rapid and visual readout. These results from our work would provide informative rationales to design a practical and noninvasive alternative for COVID-19 diagnostic testing-the presence of viral proteases in biofluids is validated.

Dopamine Imaging in Living Cells and Retina by Surface-Enhanced Raman Scattering Based on Functionalized Gold Nanoparticles

Retinal dopamine is believed to be involved in the development of myopia, which is projected to affect almost half of the world population's visual health by 2050. Direct visualization of dopamine in the retina with high spatial precision is essential for understanding the biochemical mechanism during the development of myopia. However, there are very few approaches for the direct detection of dopamine in the visual system, particularly in the retina. Here, we report surface-enhanced Raman scattering (SERS)-based dopamine imaging in cells and retinal tissues with high spatial precision. The surface of gold nanoparticles is modified with N-butylboronic acid-2-mercaptoethylamine and 3,3'-dithiodipropionic acid di(N-hydroxysuccinimide ester), which shows excellent specific reaction with dopamine. The existence of dopamine triggers the aggregation of gold nanoparticles that subsequently form plasmonic hot spots to dramatically increase the Raman signal of dopamine. The as-synthesized SERS nanoprobes have been evaluated and applied for dopamine imaging in living cells and retinal tissues in form-deprivation (FD) myopia guinea pigs, followed by further investigation on localized dopamine levels in the FD-treated mice. The results suggest a declined dopamine level in mice retina after 2-week FD treatment, which is associated with the development of myopia. Our approach will greatly contribute to better understanding the localized dopamine level associated with myopia and its possible treatments. Furthermore, the imaging platform can be utilized to sensing other important small molecules within the biological samples.

In Situ Nucleic Acid Amplification and Ultrasensitive Colorimetric Readout in a Paper-Based Analytical Device Using Silver Nanoplates

A rapid, highly sensitive, and quantitative colorimetric paper-based analytical device (PAD) based on silver nanoplates (AgNPls) and loop-mediated isothermal amplification (LAMP) is presented. It is shown that cauliflower-like concatemer LAMP products can mediate crystal etching of AgNPls, with a threefold signal enhancement versus linear dsDNA. Methicillin-resistant Staphylococcus aureus (MRSA), an antimicrobial resistant bacterium that poses a formidable risk with persistently high mortality, is used as a model pathogen. Due to the excellent color contrast provided by AgNPls, the PAD allows qualitative analysis by the naked eye and quantitative analysis using a smartphone camera, with detection limits down to a single copy in just 30 min, and a linear response from 1 to 10⁴ copies (R² = 0.994). The entire assay runs in situ on the paper surface, which drastically simplifies operation of the device. This is the first demonstration of single copy detection using a colorimetric readout, and the developed PAD shows great promise for translation into an ultrasensitive gene-based point-of-care test for any infectious disease target, via modification of the LAMP primer set.

Clinical Applications of Visual Plasmonic Colorimetric Sensing

Colorimetric analysis has become of great importance in recent years to improve the operationalization of plasmonic-based biosensors. The unique properties of nanomaterials have enabled the development of a variety of plasmonics applications on the basis of the colorimetric sensing provided by metal nanoparticles. In particular, the extinction of localized surface plasmon resonance (LSPR) in the visible range has permitted the exploitation of LSPR colorimetric-based biosensors as powerful tools for clinical diagnostics and drug monitoring. This review summarizes recent progress in the biochemical monitoring of clinical biomarkers by ultrasensitive plasmonic colorimetric strategies according to the distance- or the morphology/size-dependent sensing modes. The potential of colorimetric nanosensors as point of care devices from the perspective of naked-eye detection is comprehensively discussed for a broad range of analytes including pharmaceuticals, proteins, carbohydrates, nucleic acids, bacteria, and viruses such as Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-CoV-2). The practical suitability of plasmonic-based colorimetric assays for the rapid visual readout in biological samples, considering current challenges and future perspectives, is also reviewed.

Distance-dependent visual fluorescence immunoassay on CdTe quantum dot-impregnated paper through silver ion-exchange reaction

A paper-based visual fluorescence immunoassay is presented for the detection of matrix metalloproteinase-7 (MMP7) that is related to renal cancer. The method is based on the distance-dependent fluorescence quenching of CdTe quantum dots (QDs) on a nitrocellulose membrane by Ag⁺ following a sandwich-type immunoreaction on microtiter wells using silver nanoparticle (AgNP)-labeled secondary antibody- and primary antibody-coated microtiter wells. The silver nanoparticles captured in the well are dissolved with HNO₃, while the quenching effect of QDs is based on silver ion-exchange reaction under 365-nm excitation light irradiation. Increasing concentration of released Ag⁺, thus higher concentration of the protein, leads to an increased distance of quenching on the nitrocellulose membrane. The paper-based immunoassay by combination of AgNP-assisted ion-exchange reaction with QD gives good distance-dependent responses and allows the detection of MMP7 at a concentration as low as 7.3 pg mL^-1. The coefficients of variation are less than 6.9% and 12.4% for intra-assay and inter-assay, respectively. High specificity and long-term stability are achieved during the assay. Importantly, the testing of human serum samples using our strategy shows well-matched results with commercial human MMP7 ELISA kits. Graphical abstract A distance-dependent visual immunoassay is developed for the determination of serum matrix metalloproteinase-7 on CdTe quantum dot-impregnated paper with silver ion-exchange reaction.

Rational Design of Functional Peptide-Gold Hybrid Nanomaterials for Molecular Interactions

Gold nanoparticles (AuNPs) have been extensively used for decades in biosensing-related development due to outstanding optical properties. Peptides, as newly realized functional biomolecules, are promising candidates of replacing antibodies, receptors, and substrates for specific molecular interactions. Both peptides and AuNPs are robust and easily synthesized at relatively low cost. Hence, peptide-AuNP-based bio-nano-technological approaches have drawn increasing interest, especially in the field of molecular targeting, cell imaging, drug delivery, and therapy. Many excellent works in these areas have been reported: demonstrating novel ideas, exploring new targets, and facilitating advanced diagnostic and therapeutic technologies. Importantly, some of them also have been employed to address real practical problems, especially in remote and less privileged areas. This contribution focuses on the application of peptide-gold hybrid nanomaterials for various molecular interactions, especially in biosensing/diagnostics and cell targeting/imaging, as well as for the development of highly active antimicrobial/antifouling coating strategies. Rationally designed peptide-gold nanomaterials with functional properties are discussed along with future challenges and opportunities.

Stoichiometric Tuning of PNA Probes to Au0.8Ag0.2 Alloy Nanoparticles for Visual Detection of Nucleic Acids in Plasma

Standard detection methods for nucleic acids, an important class of diagnostic biomarkers, are often laborious and cumbersome. In need for development of facile methodologies, localized surface plasmon resonance (LSPR) assays have been widely explored for both spectroscopic and visual detection of nucleic acids. Our sensing approach is based on monitoring changes in the LSPR band due to interaction between peptide nucleic acid (PNA) and plasmonic nanoparticles (NPs) in the presence/absence of target nucleic acid. We have investigated the importance of tuning the stoichiometry of PNA to NPs to enable "naked-eye" detection of nucleic acids at clinically relevant concentration ranges. Assaying in plasma is achieved by incorporation of silver in gold NPs (AuNPs) via an alloying process. The synthesized gold/silver alloy NPs reduce nonspecific adsorption of proteinaceous interferents in plasma. Furthermore, the gold/silver alloy NPs absorb in the most sensitive cyan to green transition zone (∼500 nm) yielding highly competitive visual limits of detection (LODs). The visual LOD (calculated objectively using the ΔE algorithm) for a model microRNA (mir21) using a productive combination of stoichiometric tuning of the PNA to NP ratio and compositional tuning of the NPs in buffer and plasma extract equals 200 pM (∼250 times lower than existing reports) and 3 nM, respectively. We envision that the proposed LSPR assay based on Au_0.8Ag_0.2NPs offers an avenue for rapid and sensitive on-site detection of nucleic acids in complex matrixes in combination with efficient target extraction kits.

Portable and field-deployed surface plasmon resonance and plasmonic sensors

Plasmonic sensors are ideally suited for the design of small, integrated, and portable devices that can be employed in situ for the detection of analytes relevant to environmental sciences, clinical diagnostics, infectious diseases, food, and industrial applications. To successfully deploy plasmonic sensors, scaled-down analytical devices based on surface plasmon resonance (SPR) and localized surface plasmon resonance (LSPR) must integrate optics, plasmonic materials, surface chemistry, fluidics, detectors and data processing in a functional instrument with a small footprint. The field has significantly progressed from the implementation of the various components in specifically designed prism-based instruments to the use of nanomaterials, optical fibers and smartphones to yield increasingly portable devices, which have been shown for a number of applications in the laboratory and deployed on site for environmental, biomedical/clinical, and food applications. A roadmap to deploy plasmonic sensors is provided by reviewing the current successes and by laying out the directions the field is currently taking to increase the use of field-deployed plasmonic sensors at the point-of-care, in the environment and in industries.

Labeling-free detection of ECD-HER2 protein using aptamer-based nano-plasmonic sensor

A gold nanoparticle-based localized surface plasmon resonance substrate has been developed as nano-sensors for various bio-applications. However, reproducible and robust sensing substrates anchored gold nanoparticles has not yet been explored. In this study, dopamine-coated gold nanorods (DGNRs) were prepared and immobilized onto the micro-grooving PDMS substrates (mgPDMS). Subsequently, HER2-specific aptamers were conjugated with DGNR/mgPDMS for ECD-HER2 detection. By screening of the optimal concentration of DGNR and aptamers, the effective HER2-specific aptasensor was built up. In particular, the real-time binding assay for the evaluation of limit-of-detection (<5 ng ml^-1) was conducted. Furthermore, the binding kinetics for ECD-HER2 was investigated under the biological fluid using a rat serum. Our HER2-specific aptasensor demonstrated the effective sensitivity and selectivity for ECD-HER2.

Comparative study of serum sample preparation methods in aggregation-based plasmonic sensing

The use of nanoparticle-based colorimetric methods has received considerable attention for clinical analysis in biofluids. Sample preparation methods are surveyed here to minimize the impact of the sample matrix on the performance of a nanoparticle aggregation assay.

Core-Shell Gold/Silver Nanoparticles for Localized Surface Plasmon Resonance-Based Naked-Eye Toxin Biosensing

The localized surface plasmon resonance (LSPR) phenomenon provides a versatile property for biodetection. Herein, this unique feature was employed to build a homogeneous optical biosensor to detect staphylococcal enterotoxin A (SEA) in solution down to very low levels by naked-eye readout. If the initial position of the LSPR band is located in the cyan region, even a small red shift (∼2-3 nm) induced by a refractive index change close to the surface of nanoparticles (NPs) could make the light absorption transit from cyan to green and become visually detectable via a concomitant change in the complementary colors. In this work, we aimed at synthesizing two types of NPs based on compositionally complex core-shell NPs-Ag shells on AuNPs (Au@AgNPs) and Ag inside gold nanoshells (Ag@AuNPs). By controlling the thickness of the shells and their surface chemistry with anti-SEA antibody (Ab), the LSPR band was tuned to near 495 and 520 nm for Ag@AuNPs and Au@AgNPs, respectively. The two particle systems were subsequently applied to spectroscopically and visually detect anti-SEA Ab-SEA interactions. Upon the addition of SEA, large red shifts of the LSPR band were observed spectroscopically and the limits of detection (LODs) were estimated to be 0.2 and 0.4 nM for Au@AgNPs and Ag@AuNPs, respectively. Although the two sets of NPs gave almost identical LODs, the Ag@AuNPs whose initial position of the LSPR band was tuned in the cyan to green region (∼500 nm) displayed a substantially more distinct color change from orange to red, as revealed by the naked eye. We foresee significant potential to this strategy in medical diagnostics and environmental monitoring, especially when basic laboratory infrastructure is sparse or nonexistent.

Plasmonic coloration of silver nanodome arrays for a smartphone-based plasmonic biosensor

In this study, the utility of plasmonic coloration on silver nanodome arrays for sensitive and quantitative detection of biomolecules using a smartphone-based sensor is proposed. In particular, a quantitative analysis of DNA hybridization was achieved using the hue angle in the HSV color space obtained from a photograph of a sensing spot taken using a smartphone camera. Silver and gold nanodome arrays consisting of a polystyrene bead layer covered with a thin metal film can be created over a large area by a bottom-up fabrication process. The metal nanodome arrays exhibited unique colorations which can be tuned by the dome diameter ϕ, metal species, and refractive index of the surrounding medium. The measurement of the bulk refractive index sensitivity revealed that the Ag nanodome with ϕ = 500 nm can provide the highest sensitivity of up to 588 nm per refractive index unit. The detection of DNA hybridization was performed by using a bimetallic nanodome consisting of silver and thin gold overlayers and DNA modified gold nanoparticles (AuNPs) for enhancing the sensor signals. Upon the immobilization of AuNPs, the Ag nanodome (ϕ = 200 nm) exhibited a large shift in the resonance wavelength accompanied by a dramatic change in coloration. The analysis of detection sensitivity of DNA hybridization using a model system revealed that colorimetric detection based on hue can be used for the quantitative detection of biomolecules in the same manner as the spectroscopic method with a few pM level of detectable concentration.

Silver-Based Plasmonic Nanoparticles for and Their Use in Biosensing

The localized surface plasmon resonance (LSPR) property of metallic nanoparticles is widely exploited for chemical and biological sensing. Selective biosensing of molecules using functionalized nanoparticles has become a major research interdisciplinary area between chemistry, biology and material science. Noble metals, especially gold (Au) and silver (Ag) nanoparticles, exhibit unique and tunable plasmonic properties; the control over these metal nanostructures size and shape allows manipulating their LSPR and their response to the local environment. In this review, we will focus on Ag-based nanoparticles, a metal that has probably played the most important role in the development of the latest plasmonic applications, owing to its unique properties. We will first browse the methods for AgNPs synthesis allowing for controlled size, uniformity and shape. Ag-based biosensing is often performed with coated particles; therefore, in a second part, we will explore various coating strategies (organics, polymers, and inorganics) and their influence on coated-AgNPs properties. The third part will be devoted to the combination of gold and silver for plasmonic biosensing, in particular the use of mixed Ag and AuNPs, i.e., AgAu alloys or Ag-Au core@shell nanoparticles will be outlined. In the last part, selected examples of Ag and AgAu-based plasmonic biosensors will be presented.

Peptide-Mediated Liposome Fusion as a Tool for the Detection of Matrix Metalloproteinases

Biological cells continue to inspire the development of technologies toward rapid, sensitive, and selective detection of analytes. Membrane fusion is a key biological event in living cells that involves a highly selective recognition mechanism controlled by different functional proteins. Herein, liposome-liposome fusion mediated by coiled-coil forming peptides JR2EC and JR2KC to mimic biological membrane fusion is reported. The liposome fusion event is monitored through fluorescence generation and this mechanism forms the basis of a detection assay for matrix metalloproteinases (MMPs), which are key homeostatic proteases. Using this approach, a limit of detection of 0.35 µg mL^-1 MMP-7 in biological samples is obtained, and this assay does not require washing, separation, or amplification steps. The developed tool could be extended for the detection of other proteolytic enzymes of the MMP family (diagnostic or prognostic markers) and has the potential for screening of peptide libraries against a target of interest.

Noble Metal Nanoparticle-Based Multicolor Immunoassays: An Approach toward Visual Quantification of the Analytes with the Naked Eye

Noble metal nanoparticle-based colorimetric sensors have become powerful tools for the detection of different targets with convenient readout. Among the many types of nanomaterials, noble metal nanoparticles exhibit extraordinary optical responses mainly due to their excellent localized surface plasmon resonance (LSPR) properties. The absorption spectrum of the noble metal nanoparticles was mostly in the visible range. This property enables the visual detection of various analytes with the naked eye. Among numerous color change modes, the way that different concentrations of targets represent vivid color changes has been brought to the forefront because the color distinction capability of normal human eyes is usually better than the intensity change capability. We review the state of the art in noble metal nanoparticle-based multicolor colorimetric strategies adopted for visual quantification by the naked eye. These multicolor strategies based on different means of morphology transformation are classified into two categories, namely, the etching of nanoparticles and the growth of nanoparticles. We highlight recent progress on the different means by which biocatalytic reactions mediated LSPR modulation signal generation and their applications in the construction of multicolor immunoassays. We also discuss the current challenges associated with multicolor colorimetric sensors during actual sample detection and propose the future development of next-generation multicolor qualification strategies.

Nanoplasmonics in Paper-Based Analytical Devices

Chemical and biological sensing are crucial tools in science and technology. Plasmonic nanoparticles offer a virtually limitless number of photons for sensing applications, which can be available for visual detection over long periods. Moreover, cellulosic materials, such as paper, represent a versatile building block for implementation of simple, yet valuable, microfluidic analytical devices. This mini review outlines the basic theory of nanoplasmonics and the usability of paper as a nanoplasmonic substrate exploiting its features as a (bio)sensing platform based on different mechanisms depending on localized surface plasmon resonance response. Progress, current trends, challenges and opportunities are also underscored. It is intended for general researchers and technologists who are new to the topic as well as specialist/experts in the field.

Enhanced catalytic and SERS performance of shape/size controlled anisotropic gold nanostructures

Au nanostars of different sizes and shapes prepared using a simple method and their applications.

Toward ultrasensitive and fast colorimetric detection of indoor formaldehyde across the visible region using cetyltrimethylammonium chloride-capped bone-shaped gold nanorods as “chromophores”

A colorimetric method for detecting formaldehyde was developed by coupling bone-shaped gold nanorods (AuNRs) with silver mirror reaction, which enables low detection limit, wide linear range and high visual resolution.