Low Background Cascade Signal Amplification Electrochemical Sensing Platform for Tumor-Related mRNA Quantification by Target-Activated Hybridization Chain Reaction and Electroactive Cargo Release

Light-Driven Electrochemical Biosensing with DNA Origami-Assisted Hybrid Nanoantenna for Fumonisin B1 Monitoring

The electrochemical detection of biosensors is largely governed by the changes in physical properties of redox probes, which are susceptible to electrode substrate effects, inhibiting sensor sensitivity. In this work, a light-driven electrochemical biosensor based on a hybrid nanoantenna was developed for the sensitive detection of fumonisin B1 (FB1). The hybrid nanoantenna sensing interface was constructed by coupling CdSe quantum dots (QDs)-DNA nanowire and graphdiyne oxide composites loaded with methylene blue and gold nanorods (GDYO-MB-Au NRs) using a tetrahedral DNA nanostructure, which acted as a light-driven unit and an amplification unit, respectively. The hybrid nanoantenna with light-driven properties facilitated the alteration in the chemical properties of MB at the sensing interface; that is, MB was degraded under light illumination. The stripping of the CdSe QDs-DNA nanowire triggered by the binding of FB1 could degrade the light-driven capability, thereby improving the electrochemical signal through depressing MB degradation. Taking advantage of the photodegradation of MB by the hybrid nanoantenna, the developed biosensor reduced the background signal and increased the detection sensitivity. The developed biosensor exhibited a linear detection range from 0.5 fg mL-1 to 10 pg mL-1 and a detection limit down to 0.45 fg mL-1. This strategy shows great promise for the fabrication of highly sensitive electrochemical biosensors.

DNA nanosensor based on bipedal 3D DNA walker-driven proximal catalytic hairpin assembly for sensitive and fast TK1 mRNA detection

Hyperproliferative  diseases are the first step for tumor formation; thymidine kinase 1 (TK1) mRNA is closely related to cell proliferation. Therefore, the risk of malignant proliferation can be identified by sensitively detecting the variance in TK1 mRNA concentration, which can be used for tumor auxiliary diagnosis and monitoring tumor treatment. Owing to the low abundance and instability of TK1 mRNA in real samples, the development of a sensitive and fast mRNA detection method is necessary. A DNA nanosensor that can be used for detecting TK1 mRNA based on bipedal 3D DNA walker-driven proximal catalytic hairpin assembly (P-CHA) was developed. P-CHA hairpins were hybridized to a linker DNA strand coupled with magnetic nanoparticles to increase their local concentrations. The bipedal DNA walking on the surface of NPs accelerates reaction kinetics using the proximity effect. Taking advantage of the signal amplification of P-CHA as well as the rapid reaction rate of the DNA walker in 80 min, the proposed sensor detects TK1 mRNA with a low detection limit of 14 pM and may then be applied to clinical diagnosis.

Integration of Hybridization Chain Reaction and Protein-Binding Amplification for Long-Term Imaging of Intracellular mRNA: Avoiding Signal Fluctuation

Amplified nanoprobes based on hybridization chain reaction (HCR) have been widely developed for the detection of intracellular low abundance mRNA. However, the formed chain-like assembly decorated with fluorophore would be degraded rapidly by endogenous enzyme, resulting in failure of the long-term fluorescence imaging. To address this issue, herein, a composite signal-amplifying strategy that integrates HCR into protein-binding signal amplification (HPSA) was communicated for the in situ imaging of mRNA by avoiding signal fluctuation. Different from conventional HCR-based nanoprobes (HCR-nanoprobe), the HCR was used as the signal-triggered mode and the amplifying signal generated from in situ fluorophore-protein binding in cells, which can maintain high stability of the signal for a long time. As a proof-of-principle, a nanobeacon based on HPSA (HPSA-nanobeacon) was constructed to detect TK1 mRNA. Taking advantage of the double signal-amplifying mode, the endogenous TK1 mRNA was sensitively detected and the fluorescence signal was maintained for more than 8 h in HepG2 cells. The attempt in this work provides a new option to the current signal-amplifying strategy for sensing nucleic acid targets with high stability, significantly enhancing the acquisition of intracellular molecular information.

The Recent Applications of Magnetic Nanoparticles in Biomedical Fields

Magnetic nanoparticles (MNPs) have found extensive application in the biomedical domain due to their enhanced biocompatibility, minimal toxicity, and strong magnetic responsiveness. MNPs exhibit great potential as nanomaterials in various biomedical applications, including disease detection and cancer therapy. Typically, MNPs consist of a magnetic core surrounded by surface modification coatings, such as inorganic materials, organic molecules, and polymers, forming a nucleoshell structure that mitigates nanoparticle agglomeration and enhances targeting capabilities. Consequently, MNPs exhibit magnetic responsiveness in vivo for transportation and therapeutic effects, such as enhancing medical imaging resolution and localized heating at the site of injury. MNPs are utilized for specimen purification through targeted binding and magnetic separation in vitro, thereby optimizing efficiency and expediting the process. This review delves into the distinctive functional characteristics of MNPs as well as the diverse bioactive molecules employed in their surface coatings and their corresponding functionalities. Additionally, the advancement of MNPs in various applications is outlined. Additionally, we discuss the advancements of magnetic nanoparticles in medical imaging, disease treatment, and in vitro assays, and we anticipate the future development prospects and obstacles in this field. The objective is to furnish readers with a thorough comprehension of the recent practical utilization of MNPs in biomedical disciplines.

Construction of an autofluorescence interference-free phosphorescence biosensor for the specific detection of TK1 mRNA

The anti-interference ability of biosensors is critical for detection in biological samples. Fluorescence-based sensors are subject to interference from self-luminescent substances in biological matrices. Therefore, phosphorescent sensors stand out among biosensors due to their lack of self-luminescence background. In this study, a phosphorescent sensor was constructed, which can accurately detect thymidine kinase 1 (TK1) mRNA in biological samples and avoid autofluorescence interference. When there is no target, polydopamine (PDA) is used as the phosphorescence resonance energy transfer (PRET) acceptor to quench the phosphorescence of the persistently luminescent (PL) nanomaterial. When there is a target, the DNA modified by the PL nanomaterial is replaced by the hairpin H and removed away from the PDA, resulting in a rebound in phosphorescence. The phosphorescent sensor exhibits a good linear relationship in the TK1 mRNA concentration range of 0-200 nM, and the detection limit was 1.74 nM. The sensor fabricated in this study can effectively avoid interference from spontaneous fluorescence in complex biological samples, and sensitively and precisely detect TK1 mRNA in serum samples, providing a powerful tool to more accurately detect biomarkers in biological samples.

Colorimetric sensing for the sensitive detection of UO22+via the phosphorylation functionalized mesoporous silica-based controlled release system

In this study, we developed a simple and sensitive colorimetric sensing method for the detection of UO22+, which was built to release MB from the molybdenum disulfide with a phosphate group (MoS2-PO4) gated mesoporous silica nanoparticles functionalized phosphate group (MSN-PO4) with UO22+ chelating. In the presence of UO22+, MoS2-PO4 can be effectively adsorbed onto the surface of MSN-PO4 based on the coordination chemistry for strong affinity between the P-O bond and UO22+. The adsorbed MoS2-PO4 was then utilized as an ideal gate material to control the release of signal molecules (MB) entrapped within the pores of MSN-PO4, resulting in a detectable decrease in the absorption peak at 663 nm. This colorimetric sensing demonstrated the advantages of simplicity and easy manipulation and exhibited a linear response to the concentration of UO22+ within the range of 0.02-0.2 μM. The detection limit of UO22+ was determined to be 0.85 nM, which was lower than the limit (130 nmol L-1) set by the US Environmental Protection Agency. Furthermore, the proposed colorimetric sensing method has been utilized to determine UO22+ in samples of Xiangjiang River and tap water, and a high recovery rate was achieved. This method shows promising potential in preventing and controlling environmental pollution.

Light-Driven Photocatalytic-Photothermal Synergetic System for Portable and Sensitive Nucleic Acid Quantification

Photosensitizers and photothermal agents have attracted increasing attention for in vitro diagnosis, but the combination remains challenging. Herein, a light-driven photocatalytic-photothermal synergetic system integrated microfluidic distance-based analytical device (PCPT-μDAD) for visual, portable, sensitive, and quantitative detection of targets was developed. Target DNA was recognized and initiated the hybridization chain reaction to form a double-stranded DNA/SYBR Green I (dsDNA/SG-I) complex. By applying the photosensitization of the dsDNA/SG-I complex and the photothermal effect of oxidized 3,3',5,5'-tetramethylbenzidine, the target concentration can effectively translate into a visual distance signal readout. Importantly, the light-driven PCPT-μDAD greatly improves the controllability of catalytic reactions and signal amplification efficiency. The light-driven PCPT-μDAD shows a low limit of detection (fM level), good stability, and high reproducibility for nucleic acid detection.

Self-assembly of DNA-gold nanoaggregate for visual detection of thymidine kinase 1 (TK1) mRNA via lateral flow assay

Nucleic acid lateral flow assay (NALFA) with gold nanoparticles (AuNPs) as colorimetric probes have been extensively adopted for point-of-care testing (POCT). However, the sensitivity of NALFA still needs to be improved. Herein, DNA-gold nanoaggregate (DNA-AuNA) was assembled as a signal amplification probe of NALFA for sensitive detection of tumor marker TK1 mRNA. Four functional oligonucleotides with complementary pairs were assembled to form DNA-AuNA that coupled more AuNPs to improve sensitivity. Thus, the limit of detection (LOD) was 0.36 pM, which is lower than that of conventional AuNPs-based NALFA. Moreover, the bioassay showed good reproducibility, stability, and specificity for detecting TK1 mRNA. The detection of TK1 mRNA in human serum was also satisfactory. Therefore, DNA-AuNA-based NALFA provides a sensitive method for portable detection of TK1 mRNA.

DNA-guided self-assembly in living cells

Self-assembly processes exist widely in life systems and play essential roles in maintaining life activities. It is promising to explore the molecular fundamentals and mechanisms of life systems through artificially constructing self-assembly systems in living cells. As an excellent self-assembly construction material, deoxyribonucleic acid (DNA) has been widely used to achieve the precise construction of self-assembly systems in living cells. This review focuses on the recent progress of DNA-guided intracellular self-assembly. First, the methods of intracellular DNA self-assembly based on the conformational transition of DNA are summarized, including complementary base pairing, the formation of G-quadruplex/i-motif, and the specific recognition of DNA aptamer. Next, The applications of DNA-guided intracellular self-assembly on the detection of intracellular biomolecules and the regulation of cell behaviors are introduced, and the molecular design of DNA in the self-assembly systems is discussed in detail. Ultimately, the challenges and opportunities of DNA-guided intracellular self-assembly are commented.

Stimulus-responsive strategy based on MnO2 nanosheet-modified mesoporous silica nanoprobes for accurate multiple mRNAs detection

Fluorescence detection of multiple mRNAs has attracted great attention for disease diagnosis. In this work, a stimulus-responsive strategy for highly sensitive and accurate multiple mRNAs detection was proposed. This stimulus-responsive detection system was prepared by mesoporous silica nanoparticles (MSN), manganese dioxide (MnO₂) nanosheets, and DNA probes. DNA probes were loaded into the pores of MSN, which were closed with MnO₂ nanosheets. In the presence of glutathione (GSH) and target mRNAs, MnO₂ nanosheets were degraded by GSH, resulting in the release of DNA probes. These DNA probes hybridized to the corresponding target mRNA, thereby changing the fluorescence intensity of fluorophores of DNA probes, which could achieve the quantification of target mRNA. This system could simultaneously detect survivin mRNA and Thymidine kinase 1 mRNA at low background levels with relative limits of detection of 0.9 nM and 0.7 nM, respectively. Moreover, this assay has been successfully applied to detect multiple mRNAs with adequate anti-interference ability in the biological sample.

Gold Nanoparticle-Bridge Array to Improve DNA Hybridization Efficiency of SERS Sensors

The interfacial mass transfer rate of a target has a significant impact on the sensing performance. The surface reaction forms a concentration gradient perpendicular to the surface, wherein a slow mass transfer process decreases the interfacial reaction rate. In this work, we self-assembled gold nanoparticles (AuNPs) in the gap of a SiO₂ opal array to form a AuNP-bridge array. The diffusion paths of vertical permeability and a microvortex effect provided by the AuNP-bridge array synergistically improved the target mass transfer efficiency. As a proof of concept, we used DNA hybridization efficiency as a research model, and the surface-enhanced Raman spectroscopy (SERS) signal acted as a readout index. The experimental verification and theoretical simulation show that the AuNP-bridge array exhibited rapid mass transfer and high sensitivity. The DNA hybridization efficiency of the AuNP-bridge array was 15-fold higher than that of the AuNP-planar array. We believe that AuNP-bridge arrays can be potentially applied for screening drug candidates, genetic variations, and disease biomarkers.

Boron Carbon Nitride Nanosheets-Ru Nanocomposite Self-Enhancement Electrochemiluminescence Emitter with a Three-Dimensional DNA Network Structure as a Signal Amplifier for Ultrasensitive Detection of TK1 mRNA

In this study, a neoteric self-enhanced nanocomposite boron carbon nitride nanosheets (BCN NSs)-Ru obtained by chemical crosslinking between boron carbon nitride nanosheets (BCN NSs) and tris (4,4'-dicarboxylicacid-2,2'-bipyridyl) ruthenium(II) dichloride (Ru(dcbpy)₃Cl₂) was used as an emitter to build an electrochemiluminescence (ECL) biosensor for ultrasensitive detection of the cancer marker human thymidine kinase 1 (TK1) mRNA. Importantly, the self-enhanced BCN NSs-Ru could exhibit strong ECL emission because boron radicals and amine groups derived from BCN NSs could significantly enhance the ECL response of Ru(dcbpy)₃Cl₂, which avoided the defects of the long electron transfer path and large energy loss between the emitter and coreactant in the traditional coreaction ECL system. Impressively, in the presence of target TK1 mRNA, three-dimensional DNA network structure-labeled numerous ferrocene probes could be assembled to quickly quench the ECL signal of BCN NSs-Ru, resulting in improved biosensor sensitivity. The obtained "on-off" biosensor showed excellent stability and high sensitivity with a detection limit of 32.3 aM. In general, the developed strategy provided a new biosensing way for ultrasensitive detection of biomolecules in early disease diagnosis.

A novel electrochemical biosensor based on MIL-101-NH2 (Cr) combining target-responsive releasing and self-catalysis strategy for p53 detection

A novel electrochemical biosensor was constructed to detect p53 gene based on MIL-101-NH₂ (Cr) by combining target-responsive releasing and self-catalysis strategy. MIL-101-NH₂ (Cr) with suitable pore structure was used to encapsulate methylene blue (MB) as signal probe. The hairpin DNA (HP) containing rich-G sequences was used as gatekeeper to seal up the pores and avoid MB leakage through covalent immobilization. The p53 gene could hybridize with the loop portion of HP for the formation of dsDNA, which had the specific nicking site of the nicking endonuclease (Nt.BstNBI). Then Nt.BstNBI recognized the specific recognition site and cleaved HP to open the pore for releasing of MB. Meanwhile, the cleavage of HP released the target DNA to trigger the target recycling for signal amplification. More importantly, the plentiful rich-G sequences were exposed to form Hemin/G-quadruplex DNAzymes, which could unite MIL-101-NH₂ (Cr) to catalyze redox reaction of MB released by itself for signal amplification. The biosensor for p53 had wide linear range from 1 × 10^-14 to 1 × 10^-7 M and a low detection limit of 1.4 × 10^-15 M. The combination of target-responsive releasing and self-catalysis strategy provided a promising way for constructing ultrasensitive and simple biosensor.

Simultaneous detection of dual biomarkers using hierarchical MoS2 nanostructuring and nano-signal amplification-based electrochemical aptasensor toward accurate diagnosis of prostate cancer

Accurate and reliable quantification of tumor biomarkers in clinical samples is of vital importance for early stage diagnosis and treatment of cancer. However, a poor specificity of prostate specific antigen (PSA) testing alone fostering overdetection and overtreatment, remains a great controversy in prostate cancer (PCa) screening. Here we report an electrochemical aptasensor using hierarchical MoS₂ nanostructuring and SiO₂ nano-signal amplification for simultaneous detection of dual PCa biomarkers, PSA and sarcosine, to enhance the diagnostic performance of PCa. In this strategy, hierarchical flower-like MoS₂ nanostructures as functional interface accelerated intermolecular accessibility and improved DNA hybridization efficiency. Moreover, the spherical SiO₂ nanoprobe that conjugated with both electroactive tags and DNA probes, allowed effective electrochemical signal amplification. By deliberately designing different hybridization modes, we individually implemented the optimization of PSA and sarcosine sensing system. Based on this, simultaneous determination of PSA and sarcosine was achieved, with limit of detection (LOD) down to 2.5 fg/mL and 14.4 fg/mL, respectively, as well as excellent selectivity. More importantly, using this approach, we could directly differentiate cancer patients with healthy ones for clinical serum samples. The ultrasensitive biosensor provides single-step analysis with simple operation and a small sample volume (∼12 μL), shedding new light on accurate diagnosis and early-detection of cancer in clinical applications.

Dual-signal amplification electrochemical sensing for the sensitive detection of uranyl ion based on gold nanoparticles and hybridization chain reaction-assisted synthesis of silver nanoclusters

Herein, a dual-signal amplification electrochemical sensing has been proposed for the ultrasensitive detection of uranyl ions (UO₂²⁺) by integration of gold nanoparticles (AuNPs) and hybridization chain reaction (HCR)-assisted synthesis of silver nanoclusters (AgNCs). In this sensing platform, AuNPs are used as an ideal signal amplification carrier, aiming at increasing the loads of UO₂²⁺-specific DNAzyme on the gold electrode. In the presence of UO₂²⁺, UO₂²⁺-specific DNAzyme can be activated, leading to the cleavage of substrate strands (S-DNA). Then, HCR is triggered to produce long dsDNA through hybridization the probe with the ssDNA on the electrode surface. As a result, an amplified electrochemical response can be detected by inserting a large amount of AgNCs generated in situ using dsDNA as template. Featured with amplification efficiency, good specificity and high sensitivity, the strategy could quantitatively detect UO₂²⁺ down to 6.2 pM with a linear calibration range from 20 pM to 5000 pM. The proposed sensing platform has been also successfully demonstrated the practical application of detecting UO₂²⁺, indicating that the developed method has the potential applications and can open up a new avenue for highly sensitive detection of UO₂²⁺ in environmental monitoring.

Anti-Fouling Magnetic Beads Combined with Signal Amplification Strategies for Ultra-Sensitive and Selective Electrochemiluminescence Detection of MicroRNAs in Complex Biological Media

Herein, an electrochemiluminescence (ECL) microRNA biosensor based on anti-fouling magnetic beads (MBs) and two signal amplification strategies was developed. The newly designed anti-fouling dendritic peptide was wrapped on the surfaces of MBs to make them resistant to nonspecific adsorption of biomolecules in complex biological samples so as to realize accurate and selective target recognition. One of the amplification strategies was achieved through nucleic acid cycle amplification based on the DNAzyme on the surfaces of MBs. Then, the output DNA generated by the nucleic acid cycle amplification program stimulated the hybrid chain reaction (HCR) process on the modified electrode surface to generate the other amplification of the ECL response. Titanium dioxide nanoneedles (TiO₂ NNs), as a co-reaction accelerator of the Ru(bpy)₂(cpaphen)²⁺ and tripropylamine (TPrA) system, were wrapped with the electrodeposited polyaniline (PANI) on the electrode surface to enhance the ECL intensity of Ru(bpy)₂(cpaphen)²⁺. The conducting polymer PANI can not only immobilize the TiO₂ NNs but also improve the conductivity of the modified electrodes. The biosensor exhibited ultra-high sensitivity and excellent selectivity toward the detection of miRNA 21, with a detection limit of 0.13 fM. More importantly, with the anti-fouling MBs as a unique separation tool, this ECL biosensor was capable of assaying targets in complex biological media such as serum and cell lysate.

Hybridization chain reaction and its applications in biosensing

To pursue the sensitive and efficient detection of informative biomolecules for bioanalysis and disease diagnosis, a series of signal amplification techniques have been put forward. Among them, hybridization chain reaction (HCR) is an isothermal and enzyme-free process where the cascade reaction of hybridization events is initiated by a target analyte, yielding a long nicked dsDNA molecule analogous to alternating copolymers. Compared with conventional polymerase chain reaction (PCR) that can proceed only with the aid of polymerases and complicated thermal cycling, HCR has attracted increasing attention because it can occur under mild conditions without using enzymes. As a powerful signal amplification tool, HCR has been employed to construct various simple, sensitive and economic biosensors for detecting nucleic acids, small molecules, cells, and proteins. Moreover, HCR has also been applied to assemble complex nanostructures, some of which even act as the carriers to execute the targeted delivery of anticancer drugs. Recently, HCR has engendered tremendous progress in RNA imaging applications, which can not only achieve endogenous RNA imaging in living cells or even living animals but also implement imaging-guided photodynamic therapy, paving a promising path to promote the development of theranostics. In this review, we begin with the fundamentals of HCR and then focus on summarizing the recent advances in HCR-based biosensors for biosensing and RNA imaging strategies. Further, the challenges and future perspective of HCR-based signal amplification in biosensing and theranostic application are discussed.

A label-free and homogenous electrochemical assay for matrix metalloproteinase 2 activity monitoring in complex samples based on electrodes modified with orderly distributed mesoporous silica films

Herein, a label-free and homogeneous electrochemical strategy for monitoring of matrix metalloproteinase 2 (MMP-2) activity was proposed based on electrodes modified with orderly distributed mesoporous silica films (MSFs). In the absence of target MMP-2, an artificially substrate peptide with positive charge was absorbed on the surface of MSFs by electrostatic interaction, which could prevent electrochemical molecules [Ru(NH₃)₆]Cl₃ from approaching the electrode surface. When the substrate peptide was hydrolyzed by target MMP-2, [Ru(NH₃)₆]Cl₃ could arrive to the electrode surface and lead to the increase of electrochemical signal. This assay showed considerable sensitivity to target MMP-2, which could measure it down to 0.98 ng. mL^-1. Meanwhile, a satisfied response to the inhibitor of MMP-2 was also achieved (IC-50 value = 1.68 μM). Significantly, it displayed satisfactory performances in the complicated biological samples including cell lysates and human serum. Taking advantages of the anti-fouling ability in biological complex samples of MSFs and the high efficiency of homogeneous sensing, this assay realized the electrochemical detection of MMP-2 with accuracy and sensitivity, which exhibited significant potential in clinical biomedicine and biological analysis of cancer-related protease.

Novel electrochemical biosensor based on Exo III-assisted digestion of dsDNA polymer from hybridization chain reaction in homogeneous solution for CYFRA 21-1 DNA assay

A novel electrochemical biosensing strategy was proposed to detect cytokeratin fragment antigen 21-1 (CYFRA 21-1) DNA based on Exo III-assisted digestion of dsDNA polymer (EADDP) from hybridization chain reaction (HCR). Primarily, the presence of target can drive a catalytic hairpin assembly (CHA) reaction, which was aimed to achieve target recognition and circulation. Then the HCR can be triggered for further signal amplification and generate long dsDNA polymer with signal tags. Subsequently, the introduction of Exo III can digest the long dsDNA polymer to produce large amounts of double signal fragments (DSFs). The above experiments were all carried out in homogeneous solution. Finally, the released DSF can be captured onto the electrode directly by capture probe (CP) and a highly amplified electrochemical signal can be detected. The EADDP in homogeneous solution circumvented complex solid-liquid interface reaction and tedious operation steps on electrode. Besides, one target can be converted into abundant DSFs, which greatly improved the sensitivity. This biosensor exhibited a low detection limit (0.0348 fM) and wide linear range (5 fM ∼ 50 nM) for CYFRA 21-1 DNA biosensing with reliable specificity and stability.

Aptamer-functionalized metal-organic frameworks (MOFs) for biosensing

As a class of crystalline porous materials, metal-organic frameworks (MOFs) have attracted increasing attention. Due to the nanoscale framework structure, adjustable pore size, large specific surface area, and good chemical stability, MOFs have been applied widely in many fields such as biosensors, biomedicine, electrocatalysis, energy storage and conversions. Especially when they are combined with aptamer functionalization, MOFs can be utilized to construct high-performance biosensors for numerous applications ranging from medical diagnostics and food safety inspection, to environmental surveillance. Herein, this article reviews recent innovations of aptamer-functionalized MOFs-based biosensors and their bio-applications. We first briefly introduce different functionalization methods of MOFs with aptamers, which provide a foundation for the construction of MOFs-based aptasensors. Then, we comprehensively summarize different types of MOFs-based aptasensors and their applications, in which MOFs serve as either signal probes or signal probe carriers for optical, electrochemical, and photoelectrochemical detection, with an emphasis on the former. Given recent substantial research interests in stimuli-responsive materials and the microfluidic lab-on-a-chip technology, we also present the stimuli-responsive aptamer-functionalized MOFs for sensing, followed by a brief overview on the integration of MOFs on microfluidic devices. Current limitations and prospective trends of MOFs-based biosensors are discussed at the end.

A sensitive electrochemiluminescence DNA biosensor based on the signal amplification of ExoIII enzyme-assisted hybridization chain reaction combined with nanoparticle-loaded multiple probes

An electrochemiluminescence (ECL) DNA biosensor based on ExoIII exonuclease assistance and hybridization chain reaction (HCR) amplification technology has been constructed. ExoIII exonuclease and triple-helix DNA molecular switch are used in detecting a target in circulation. By combining HCR with AuNPs@DNA, a novel signal probe is built, which enables multiple signal amplification and the high-sensitive detection of transgenic rice BT63 DNA. The Fe₃O₄@Au solution is added to a magneto-controlled glassy carbon electrode, and sulfhydryl-modified capture DNA (CP) is immobilized on Fe₃O₄@Au through the Au-S bond. Mercaptoethanol is added to close sites and prevent the nonspecific adsorption of CP on the magnetron glassy carbon electrode. A target DNA is added to a constructed triple-helix DNA molecular centrifuge tube for reaction. Owing to base complementation and the reversible switching of the triple-helix DNA molecular state, the target DNA turns on the triple-helix DNA molecular switch and hybridizes with a long-strand recognition probe (RP) to form a double-stranded DNA (dsDNA). Exonuclease ExoIII is added to specifically recognize and cut the dsDNA and to release the target DNA. The target DNA strand then circulates back completely to open the multiple triple-helix DNA molecular switch, releasing a large number of signal transduction probes (STP). To hybridize with CP, a large amount of STP is added to the electrode. Finally, a AuNPs@DNA signal probe is added to hybridize with STP. H1 and H2 probes are added for the hybridization chain reaction and the indefinite extension of the primer strand on the probe. Then, tris-(bipyridyl)ruthenium(II) is added for ECL signal detection with PBS-tri-n-propylamine as the base solution. In the concentration range 1.0 × 10^-16 to 1.0 × 10^-8 mol/L of the target DNA, good linear relationship was achieved with the corresponding ECL signal. The detection limit is 3.6 × 10^-17 mol/L. The spiked recovery of the rice samples range from 97.2 to 101.5%. The sensor is highly sensitive and has good selectivity, stability, and reproducibility. A novel electrochemiluminescence biosensor with extremely higher sensitivity was prepared for the determination of ultra-trace amount transgenic rice BT63 DNA. The sensitivity was significantly improved by multiple signal enhancements. Firstly, a large number of signal transduction probes are released when the triple-helix DNA molecular switch unlock after recycles assisted by ExoIII exonuclease under target BT63 DNA; and then the signal transduction probes hybridize with the signal probes of AuNPs@(DNA-HCR) produced through hybridization chain reaction. Finally, the signal probes which were embedded with a large amount of electrochemiluminescence reagent produce high luminescence intensity. The detection limit was 3.6 × 10^-17 mol/L, which is almost the most sensitive methods reported.

Target triggered ultrasensitive electrochemical polychlorinated biphenyl aptasensor based on DNA microcapsules and nonlinear hybridization chain reaction

In this work, we demonstrated an ultrasensitive detection platform for polychlorinated biphenyls (PCBs) based on DNA microcapsules and a nonlinear hybridization chain reaction (NHCR). In the process, first, electrochemical signal molecules (Methylene Blue, MB) were sealed in the prepared DNA microcapsules. In the presence of PCB-72, DNA microcapsules could be dissociated with the conjugation of the aptamer and target, and meanwhile, the released DNA strand could initiate the NHCR and trigger the chain branching growth of DNA dendrimers. Because the released MBs were intercalated into the DNA dendrimer, enhanced electrochemical responses could be detected. This method exhibited ultrahigh sensitivity to PCB-72 with a detection limit of 0.001 ng mL-1. Furthermore, the present aptasensor was also capable of discriminating different PCB congeners. Therefore, the devised label-free and enzyme-free amplification electrochemical aptasensor strategy has great potential for the detection of PCB-72 in real samples, and this strategy may also become an attractive alternative for sensitive and selective small molecule, protein, nucleic acid and nuclease activity detection.

Ultrasensitive Detection of RNA with Single-Base Resolution by Coupling Electrochemical Sensing Strategy with Chimeric DNA Probe-Aided Ligase Chain Reaction

Accurate and sensitive detection of single-base mutations in RNAs is of great value in basic studies of life science and medical diagnostics. However, the current available RNA detection methods are challenged by heterogeneous clinical samples in which trace RNA mutants usually existed in a large pool of normal wild sequences. Thus, there is still great need for developing the highly sensitive and highly specific methods in detecting single-base mutations of RNAs in heterogeneous clinical samples. In the present study, a new chimeric DNA probe-aided ligase chain reaction-based electrochemical method (cmDNA-eLCR) was developed for RNA mutation detection through the BSA-based carrier platform and the horseradish peroxidase-hydrogen peroxide-tetramethylbenzidine (HRP-H₂O₂-TMB) system. The denaturing polyacrylamide gel electrophoresis and a fluorophore-labeled probe was ingeniously designed to demonstrate the advantage of cmDNA in ligation to normal DNA templated by RNA with the catalysis of T4 RNA ligase 2 as well as its higher selectivity than DNA ligase system. Finally, the proposed cmDNA-eLCR, compared with the traditional eLCR, showed excellent performance in discriminating single base-mismatched sequences, where the signal response for mismatched targets at a high concentration could overlap completely with that for the blank control. Besides, this cmDNA-eLCR assay had a wide linear range crossing six orders of magnitude from 1.0 × 10^-15 to1.0 × 10^-10 M with a limit of detection as low as 0.6 fM. Furthermore, this assay was applied to detect RNA in real sample with a satisfactory result, thereby demonstrating its great potential in diagnosis of RNA-related diseases.

The Recent Development of Hybridization Chain Reaction Strategies in Biosensors

With the continuous development of biosensors, researchers have focused increasing attention on various signal amplification strategies to pursue superior performance for more applications. In comparison with other signal amplification strategies, hybridization chain reaction (HCR) as a powerful signal amplification technique shows its certain charm owing to nonenzymatic and isothermal features. Recently, on the basis of conventional HCR, this technique has been developed and improved rapidly, and a variety of HCR-based biosensors with excellent performance have been reported. Herein, we present a systematic and critical review on the research progress of HCR in biosensors in the last five years, including the newly developed HCR strategies such as multibranched HCR, migration HCR, localized HCR, in situ HCR, netlike HCR, and so on, as well as the combination strategies of HCR with isothermal signal amplification techniques, nanomaterials, and functional DNA molecules. By illustrating some representative works, we also summarize the advantage and challenge of HCR in biosensors, and offer a deep discussion of the latest progress and future development trends of HCR in biosensors.

Electrochemical Analysis of Target-Induced Hairpin-Mediated Aptamer Sensors

The state of probe DNA at the biosensing interface greatly affects the detection performance of electrochemical DNA biosensors. Herein, we constructed a target-induced hairpin-mediated biosensing interface to study the effect of probe DNA on the analytical performance of adenosine triphosphate aptamer (ATPA) and adenosine triphosphate (ATP) detection. Moreover, we also explored the electrochemical contribution of the coexisting hairpin and double-stranded DNA (dsDNA) to this sensing interface. Experimental results suggested that the molecular recognition ability and detection performance of the biosensing interface were majorly dependent on the surface density of methylene blue (MB)-labeled probe hairpin DNA and partly affected by the spatial state of the formed dsDNA. When the surface density of hairpin DNA was moderate (5.72 pmol cm^-2), this sensing interface determined as low as 0.74 fM ATPA and 5.04 pM ATP with high selectivity and excellent regeneration, respectively. Furthermore, we calculated that the formed dsDNA had a 31.87% contribution in the total electrochemical signal for 10 pM ATPA detection. Based on the above results, we designed an XOR logic gate based on the biosensing interface for ATPA and ATP detection.

Electron Acceptors Co-Regulated Self-Powered Photoelectrochemical Strategy and Its Application for Circulating Tumor Nucleic Acid Detection Coupled with Recombinase Polymerase Amplification

Biosensor working in a self-powered mode has been widely concerned because it produces a signal when the bias potential is 0 V. However, the self-powered mode is used only when the materials have self-powered properties. Conversion of non-self-powered to self-powered through molecular regulation can solve this problem effectively. Here, we fabricated a self-powered photoelectrochemical mode based on co-regulation of electron acceptors methylene blue (MB) and p-nitrophenol (p-NP). AuNPs@ZnSe nanosheet-modified gold electrode (AuNPs@ZnSeNSs/GE) gave a small photocurrent at 0 V. In the presence of MB and p-NP, AuNPs@ZnSeNSs/GE gave the strongest photocurrent at 0 V. Accordingly, an electron acceptor co-regulated self-powered photoelectrochemical assay was fabricated. As proof-of-concept demonstrations, this assay was applied for prostate cancer circulating tumor nucleic acid biomarker, KLK2 and PCA3, detection combined with in situ recombinase polymerase amplification strategy. This assay generated a strong photocurrent and was sensitive to the variation of KLK2 and PCA3 concentration. The limits of detection were 30 and 32 aM, respectively. We anticipate this electron acceptor co-regulated self-powered photoelectrochemical mode to pave a new way for the development of self-powered sensing.

Simple homogeneous electrochemical target-responsive aptasensor based on aptamer bio-gated and porous carbon nanocontainer derived from ZIF-8

A simple homogeneous electrochemical aptasensor was designed by using target-responsive substrate releasing from aptamer-gated zeolitic imidazolate framework-8 (ZIF-8)-derived porous carbon nanocontainer. The nanocontainer (Z-700) was prepared by calcination of ZIF-8 at 700 °C. Z-700 had great biocompatibility, high surface areas and pore volume, especially the graphene-like π-rich structure, which was beneficial for adsorbing aptamer easily. The electroactive dyes methylene blue (MB) was then trapped in the pores of Z-700 and easily capped with aptamer as gatekeeper based on π-stacking interaction. Upon addition of target protein thrombin (Thb), the Thb could specifically recognize and combine with its aptamer to form complex. Thereafter, the aptamer bio-gate opened and the MB released from the pores, which could be detected on the screen-printed electrode. Under the optimized conditions, the proposed Thb aptasensor showed a wide detection range from 1 fM to 1 nM with a low detection limit of 0.57 fM. The strategy by using ZIF-8-derived porous carbon and aptamer bio-gate provides a promising scheme for developing simple, rapid, reliable and ultrasensitive bioassays, which has a great potential as a powerful tool in disease diagnosis and biomedicine.

Construction of an ultrasensitive electrochemical sensing platform for microRNA-21 based on interface impedance spectroscopy

A hybridization chain reaction (HCR) amplification-based electrochemical impedimetric biosensor is fabricated for the quick, sensitive, and specific detection of miRNA-21 (miR-21) via monitoring of electrode interfacial property changes in real-time. Two sequences of H1 and H2 are adopted to trigger HCR amplification. A large amount of linear DNA concatemer are formed which could change the interfacial properties of the electrode. Interfacial charge transfer resistance difference (R_ct) is probed via electrochemical impedance spectroscopy (EIS) and Randles equivalent circuit. After amplifying via HCR, oligonucleotides with negatively charged repelling [Fe(CN)₆]^3-/4- ions can form a spatial blockage. HCR amplification strategy markedly enhanced the electrochemical signal with a limit of detection (LOD) down to 4.63 fM (S/N = 3). This strategy exhibited excellent selectivity for three different miRNAs: miR-199a, miR-141, and miR-155. Moreover, results show that the proposed method can be applied to miR-21 detection in the total RNA extracted from five cells. This work presents an enzyme-free and label-free EIS nucleic acid sensor for sensitively and selectively detecting miR-21, offering a promising approach in early diseases diagnosis.

Amplified electrochemical determination of UO22+ based on the cleavage of the DNAzyme and DNA-modified gold nanoparticle network structure

A superior electrochemical biosensor was designed for the determination of UO₂²⁺ in aqueous solution by integration of DNAzyme and DNA-modified gold nanoparticle (DNA-AuNP) network structure. Key features of this method include UO₂²⁺ inducing the cleavage of the DNAzyme and signal amplification of DNA-AuNP network structure. In this electrochemical method, the DNA-AuNP network structure can be effectively modified on the surface of gold electrode and then employed as an ideal signal amplification unit to generate amplified electrochemical response by inserting a large amount of electrochemically active indicator methylene blue (MB). In the presence of UO₂²⁺, the specific sites on DNA-AuNP network structure can be cleaved by UO₂²⁺, releasing the DNA-AuNP network structure with detectable reduction of electrochemical response intensity. The electrochemical response intensity is related to the concentration of UO₂²⁺. The logarithm of electrochemical response intensity and UO₂²⁺ concentration showed a wide linear range of 10~100 pM, and the detection limit reached 8.1 pM (S/N = 3). This method is successfully used for determination of UO₂²⁺ in water samples. Graphical abstract Fabricated DNAzyme network structure for enhanced electrical signal. Numerical experiments show that the current signal decreases as the concentration of UO₂²⁺ increases. It can be seen that the biosensors could be used to detect UO₂²⁺ in aqueous solution effectively.

A Dynamic DNA Machine via Free Walker Movement on Lipid Bilayer for Ultrasensitive Electrochemiluminescent Bioassay

Herein, an ultrasensitive electrochemiluminescent (ECL) strategy was proposed based on a highly efficient dynamic DNA machine based on microRNA triggered free movement on the lipid bilayer interface. Typically, the lipid bilayer is constructed on the electrode surface modified with nafion@ECL luminophore and gold nanoparticles to immobilize the DNA walker labeled with cholesterol and hairpin nucleotides labeled with cholesterol and ferrocene (Fc), based on the cholesterol-lipid interaction. On this state, Fc was close to the ECL luminophore, performing a quenched ECL emission. In the presence of target microRNA 21, it could trigger the entropy beacon-based DNA amplification to convert microRNA to massive special DNA sequences, which could further hybridize with the blocking DNA on DNA walker to reactivate the DNA walker and thus trigger the DNA walker-based amplification to make Fc to be far from the ECL luminophore, performing a recovered ECL emission related with the concentration of microRNA 21. Compared with the conventional DNA walker immobilized on the interface via chemical bonds or physical adsorption, a higher reaction efficiency could be achieved due to the free movements of DNA walker and its substrates on the interface. As expected, satisfactory performances for the detection of microRNA 21 were achieved with a detection limit of 0.4 fM and quantitative estimation in cells. Furthermore, this dynamic DNA machine-based ECL strategy could be readily expanded for the detection of other biomarkers for clinical diagnosis.

Mesoporous Silica Containers and Programmed Catalytic Hairpin Assembly/Hybridization Chain Reaction Based Electrochemical Sensing Platform for MicroRNA Ultrasensitive Detection with Low Background

In this work, based on mesoporous silica containers (MSNs) with the programmed enzyme-free DNA assembly amplification of catalytic hairpin assembly (CHA) and hybridization chain reaction (HCR), an ultrasensitive electrochemical sensing platform with low background is developed for the detection of microRNA (miRNA). Herein, the electrochemical reporter methylene blue (MB) was sealed in the pores of MSNs by the double-stranded DNA (dsDNA) gate of hairpin DNA H1 and anchor DNA. In the absence of target, neither the CHA nor the HCR process happened, which enabled a low background. After target was added, DNA H1 was displaced from the MSNs surface and participated in the CHA process with the assistance of hairpin DNA H2, which accelerated the release of MB from the MSNs pore. Meanwhile, the CHA products H1-H2 were hybridized with the capture probes (SH-CP) on the electrode surface, which further initiated the HCR process. The released MB from the MSNs will effectively intercalate into long dsDNA polymers of HCR products, resulting in a significant electrochemical response. Taking miRNA-21 as the model target, the proposed sensing platform achieves a satisfactory detection limit down to 0.037 fM, which is lower than that of electrochemical assay with amplification methods. In addition, the strategy shows good selectivity against other miRNAs and is capable in practical analytes. Benefitting from the features of being label-free and enzyme-free and having low background, high sensitivity, and selectivity, this strategy shows great potential in bioanalysis and clinical diagnostics.

Bipolar electrode-electrochemiluminescence (ECL) biosensor based on a hybridization chain reaction

A novel electrochemiluminescence (ECL) closed bipolar electrode (BPE) chip was designed based on a hybridization chain reaction (HCR)-induced ECL amplification strategy for the detection of both DNA and H₂O₂. Without the utilization of a patterned ITO bipolar electrode (BPE), this chip platform consisted of an ITO glass coated with two layers of PDMS slices. The ITO cathode was modified with Au nanoparticles for further functionalization of biomolecules, which could also amplify the ECL signal at the anode of the BPE. Based on the specific hybridization and hybridization chain reaction (HCR), DNA sequences were greatly extended, leading to a significant increase in the resistance of the cathode. The reduction of H₂O₂ was inhibited on the cathode of the BPE, resulting in a quenching effect on the ECL intensity on the anode of the BPE. The designed biosensor displayed a satisfactory linear relationship for the detection of both DNA and H₂O₂. Therefore, the biosensor could not only be employed for DNA assays but also used in enzyme reactions based on the generation of H₂O₂.

Long noncoding RNAs: from genomic junk to rising stars in the early detection of cancer

Despite having been underappreciated in favor of their protein-coding counterparts for a long time, long noncoding RNAs (lncRNAs) have emerged as functional molecules, which defy the central dogma of molecular biology, with clear implications in cancer. Altered expression levels of some of these large transcripts in human body fluids have been related to different cancer conditions that turns them into potential noninvasive cancer biomarkers. In this review, a brief discussion about the importance and current challenges in the determination of lncRNAs associated to cancer is provided. Different electrochemical nucleic acid-based strategies for lncRNAs detection are critically described. Future perspectives and remaining challenges for the practical implementation of these methodologies in clinical medicine are also discussed.

An in situ assembly strategy for the construction of a sensitive and reusable electrochemical aptasensor

In situ assembly of an electroactive AuNPs–Cu²⁺–l-cysteine tag was applied for the construction of a sensitive and reusable aptasensor.