Split Dapoxyl Aptamer for Sequence-Selective Analysis of Nucleic Acid Sequence Based Amplification Amplicons

Allosteric strand displacement isothermal amplification for the visual detection of Toxoplasma gondii in 30 minutes

Early detection of Toxoplasma gondii (T. gondii) is critical due to a lack of effective treatment for toxoplasmosis.This study established a simple, cost-effective, and rapid colorimetric detection method for T. gondii. The entire testing process, from sample collection to results, takes only 0.5 h. These characteristics fulfill the demands of researchers seeking rapid target detection with minimal equipment reliance. For genomic extraction, this study evaluated the ability of two filter papers to capture genomes. A rapid genomic extraction device combined with the two filter papers was designed to simplify the genomic extraction process, which was completed within 10 min and increased the detection sensitivity tenfold. The method utilized a simplified primer design for isothermal amplification, namely allosteric strand displacement (ASD), and employed an underutilized commercial color indicator, Bromothymol Blue (BTB), for signal output. Compared with other reported indicators, BTB exhibited a more pronounced color change, shifting from blue to yellow in positive samples, facilitating easier visual differentiation. The reaction was completed in 20 min with a limit of detection (LOD) as low as 0.014 T. gondii per microliter.

DNA-Aptamer-Based qPCR Using Light-Up Dyes for the Detection of Nucleic Acids

Quantitative polymerase chain reaction (qPCR) is widely used in detection of nucleic acids, but existing methods either lack sequence-specific detection or are costly because they use chemically modified DNA probes. In this work, we apply a DNA aptamer and light-up dye-based chemistry for qPCR for nucleic acid quantification. In contrast to the conventional qPCR, in our method, we observe an exponential decrease in fluorescence upon DNA amplification. The qPCR method we developed produced consistent Ct vs log10 (DNA amount) standard curves, which have a linearfit with R2 value > 0.99. This qPCR technique was validated by quantifying gene targets from Streptococcus zooepidemicus (SzhasB) and Mycobacterium tuberculosis (MtrpoB). We show that our strategy is able to successfully detect DNA at as low as 800 copies/μL. To the best of our knowledge, this is the first study demonstrating the application of light-up dyes and DNA aptamers in qPCR.

Smartphone-based chemiluminescence detection of aflatoxin B1 via labelled and label-free dual sensing systems

To develop a sensing platform for onsite determination of AFB₁ in foodstuffs, we developed smartphone-based chemiluminescence detection of AFB₁ via labelled and label-free dual modes. The labelled mode was characteristic of double streptavidin-biotin mediated signal amplification, obtaining limit of detection (LOD) of 0.04 ng/mL in the linear range of 1-100 ng/mL. To reduce the complexity in the labelled system, a label-free mode based on both split aptamer and split DNAzyme was fabricated. A satisfactory LOD of 0.33 ng/mL was generated in the linear range of 1-100 ng/mL. Both labelled and label-free sensing systems achieved outstanding recovery rate in AFB₁-spiked maize and peanut kernel samples. Finally, two systems were successfully integrated into smartphone-based portable device based on custom-made components and android application, achieving comparable AFB₁ detection ability to a commercial microplate reader. Our systems hold huge potential for AFB₁ onsite detection in food supply chain.

Synthetic biology-based bioreactor and its application in biochemical analysis

In the past few years, synthetic biologists have established some biological elements and bioreactors composed of nucleotides under the guidance of engineering methods. Following the concept of engineering, the common bioreactor components in recent years are introduced and compared. At present, biosensors based on synthetic biology have been applied to water pollution monitoring, disease diagnosis, epidemiological monitoring, biochemical analysis and other detection fields. In this paper, the biosensor components based on synthetic bioreactors and reporters are reviewed. In addition, the applications of biosensors based on cell system and cell-free system in the detection of heavy metal ions, nucleic acid, antibiotics and other substances are presented. Finally, the bottlenecks faced by biosensors and the direction of optimization are also discussed.

Molecular Mechanisms Underlying CRISPR/Cas-Based Assays for Nucleic Acid Detection

Applied to investigate specific sequences, nucleic acid detection assays can help identify novel bacterial and viral infections. Most up-to-date systems combine isothermal amplification with Cas-mediated detection. They surpass standard PCR methods in detection time and sensitivity, which is crucial for rapid diagnostics. The first part of this review covers the variety of isothermal amplification methods and describes their reaction mechanisms. Isothermal amplification enables fast multiplication of a target nucleic acid sequence without expensive laboratory equipment. However, researchers aim for more reliable results, which cannot be achieved solely by amplification because it is also a source of non-specific products. This motivated the development of Cas-based assays that use Cas9, Cas12, or Cas13 proteins to detect nucleic acids and their fragments in biological specimens with high specificity. Isothermal amplification yields a high enough concentration of target nucleic acids for the specific signal to be detected via Cas protein activity. The second part of the review discusses combinations of different Cas-mediated reactions and isothermal amplification methods and presents signal detection techniques adopted in each assay. Understanding the features of Cas-based assays could inform the choice of an optimal protocol to detect different nucleic acids.

Detection of Multiplex NASBA RNA Products Using Colorimetric Split G Quadruplex Probes

Structural RNA is a challenging target for recognition by hybridization probes. This chapter addresses the recognition problem of RNA amplicons in samples obtained by multiplex nucleic acid sequence-based amplification (NASBA). The method describes the design of G-quadruplex binary (split) DNA peroxidase sensors that produces colorimetric signal upon recognition of NASBA amplicons.

Tagging Peptides with a Redox Responsive Fluorescent Probe Enabled by Photoredox Difunctionalization of Phenylacetylenes with Sulfinates and Disulfides

Herein, we describe a photoredox three-component atom-transfer radical addition (ATRA) reaction of aryl alkynes directly with dialkyl disulfides and alkylsulfinates, circumventing the utilization of chemically unstable and synthetically challenging S-alkyl alkylthiosulfonates as viable addition partners. A vast array of (E)-β-alkylsulfonylvinyl alkylsulfides was prepared with great regio- and stereoselectivity. Moreover, this powerful tactic could be employed to tag cysteine residues of complex polypeptides in solution or on resin merging with solid phase peptide synthesis (SPPS) techniques. A sulfonyl-derived redox responsive fluorescent probe could be conveniently introduced on the peptide, which displays green fluorescence in cells while showing blue fluorescence in medium. The photophysical investigations reveal that the red shift of the emission fluorescence is attested to reduction of carbonyl group to the corresponding hydroxyl moiety. Interestingly, the fluorescence change of tagged peptide could be reverted in cells by treatment of H₂O₂, arising from the reoxidation of hydroxyl group back to ketone by the elevated level of reactive oxygen species (ROS).

A self-assembling split aptamer multiplex assay for SARS-COVID19 and miniaturization of a malachite green DNA-based aptamer

Multiplex assays often rely on expensive sensors incorporating covalently linked fluorescent dyes. Herein, we developed a self-assembling aptamer-based multiplex assay. This multiplex approach utilizes a previously established split aptamer sensor in conjugation with a novel split aptamer sensor based upon a malachite green DNA aptamer. This system was capable of simultaneous fluorescent detection of two SARS COVID-19-related sequences in one sample with individual sensors that possesses a limit of detection (LOD) in the low nM range. Optimization of the Split Malachite Green (SMG) sensor yielded a minimized aptamer construct, Mini-MG, capable of inducing fluorescence of malachite green in both a DNA hairpin and sensor format.

G-Quadruplex-Proximized Aptamers (G4PA) Efficiently Targeting Cell-Surface Transferrin Receptors for Targeted Cargo Delivery

DNA-assembled multiaptamer systems have been demonstrated to significantly promote the aptamer capacity of binding cell-surface-expressed proteins. However, how to conveniently harness them for efficient transmembrane delivery of targets remains a challenge. Toward this goal, here we engineer a G-quadruplex-proximized aptamer (G4PA) system in which a DNA aptamer specific for transferrin receptor (TfR) is guided by a bimolecular G4 and assembles into a dimerized proximity form that well matches homodimeric TfR highly expressed on the cancer cell surface. This system displays a higher capacity for targeting cell-surface TfR than the monomeric aptamer and super transmembrane transportation of nucleic acid cargoes, which is comparable to that of conventional liposome transfection but overcomes the lack of targeting ability of the latter. The G4PA system is then applied to the targeted delivery of siRNA for PLK1 gene silencing in positive cells rather than negative controls, showing great promise for use in precise anticancer therapy.

MicroRNA detection in biologically relevant media using a split aptamer platform

MicroRNA (miRNA)-based intercellular communication has been implicated in many functional and dysfunctional biological processes. This has raised interest in the potential use of miRNAs as biomarkers for diagnosis and prognosis. Though the list of clinically significant miRNA biomarkers is expanding, it remains challenging to adapt current chemical tools to investigate miRNAs in complex environments native to cells and tissues. We describe here a methodology for rapidly developing aptamer-based fluorescent biosensors that can specifically detect miRNAs in biologically relevant media (10-30% v/v), including medium collected from cultured HeLa cells, human serum, and human plasma. This methodology involves the semi-rational design of the hybridization between DNA oligonucleotides and the miRNA target to build a pool of potential aptamers, and the screening of this pool for high signal-to-background ratio and target specificity. The DNA oligonucleotides are readily available and require no chemical modification, rendering these chemical tools highly adaptable to any novel and niche miRNA target. Following this approach, we developed sensors that detect distinct oncogenic miRNA targets (miR-19b, miR-21, and miR-92a) at concentrations as low as 5 nM without amplification and are selective against single-nucleotide mutants. This work provides a systematic approach toward the development of miRNA biosensors that are easily accessible and can perform in biological environments with minimal sample handling.

Molecular Probes, Chemosensors, and Nanosensors for Optical Detection of Biorelevant Molecules and Ions in Aqueous Media and Biofluids

Synthetic molecular probes, chemosensors, and nanosensors used in combination with innovative assay protocols hold great potential for the development of robust, low-cost, and fast-responding sensors that are applicable in biofluids (urine, blood, and saliva). Particularly, the development of sensors for metabolites, neurotransmitters, drugs, and inorganic ions is highly desirable due to a lack of suitable biosensors. In addition, the monitoring and analysis of metabolic and signaling networks in cells and organisms by optical probes and chemosensors is becoming increasingly important in molecular biology and medicine. Thus, new perspectives for personalized diagnostics, theranostics, and biochemical/medical research will be unlocked when standing limitations of artificial binders and receptors are overcome. In this review, we survey synthetic sensing systems that have promising (future) application potential for the detection of small molecules, cations, and anions in aqueous media and biofluids. Special attention was given to sensing systems that provide a readily measurable optical signal through dynamic covalent chemistry, supramolecular host-guest interactions, or nanoparticles featuring plasmonic effects. This review shall also enable the reader to evaluate the current performance of molecular probes, chemosensors, and nanosensors in terms of sensitivity and selectivity with respect to practical requirement, and thereby inspiring new ideas for the development of further advanced systems.

Stoichiometric approach to quantitative analysis of biomolecules: the case of nucleic acids

Majority of protocols for quantitative analysis of biomarkers (including nucleic acids) require calibrations and target standards. In this work, we developed a principle for quantitative analysis that eliminates the need for a standard of a target molecule. The approach is based on stoichiometric reporting. While stoichiometry is a simple and robust analytical platform, its utility toward the analysis of biomolecules is very limited due to the lack of general methodologies for detecting the equivalence point. In this work, we engineer a new target/probe-binding model that enables detecting the equivalence point while maintaining an appropriate level of specificity. We establish the probe design principles through theoretical simulations and experimental confirmation. Further, we demonstrate the utility of the stoichiometric analysis via a proof-of-concept system based on oligonucleotide hybridization. Overall, the approach that requires neither standard nor calibration yields quantitative results with an adequate accuracy (> 90-110%) and a high specificity. The principles established in our work are very general and can extend beyond oligonucleotide targets toward quantitative analysis of many other biomolecules such as antibodies and proteins.

Logic-Gated Proximity Aptasensing for Cell-Surface Real-Time Monitoring of Apoptosis

In nature, intact apoptotic cells release ATP as a signaling molecule to trigger prompt phagocytic clearance, even at the earliest stage of apoptosis. Inspired by this, here we introduce a straightforward strategy for real-time monitoring ATP exocytosis and drug-stimulated apoptosis in the cancer cell surroundings. Triplex-boosted G-quadruplexes (tb-G4s) responding to cell environmental factors (H⁺ and K⁺ ) are engineered to construct a DNA logic-gated nanoplatform for proximity ATP aptasensing on the cell surface. It enables the real-time monitoring of cell apoptosis by capturing released endogenous ATP during chemotherapy drug stimulation, providing a sensitive approach for dynamically evaluating drug-induced apoptosis and therapeutic efficacy.

Aptamers isolated against mosquito-borne pathogens

Mosquito-borne diseases are a major threat to public health. The shortcomings of diagnostic tools, especially those that are antibody-based, have been blamed in part for the rising annual morbidity and mortality caused by these diseases. Antibodies harbor a number of disadvantages that can be clearly addressed by aptamers as the more promising molecular recognition elements. Aptamers are defined as single-stranded DNA or RNA oligonucleotides generated by SELEX that exhibit high binding affinity and specificity against a wide variety of target molecules based on their unique structural conformations. A number of aptamers were developed against mosquito-borne pathogens such as Dengue virus, Zika virus, Chikungunya virus, Plasmodium parasite, Francisella tularensis, Japanese encephalitis virus, Venezuelan equine encephalitis virus, Rift Valley fever virus and Yellow fever virus. Intrigued by these achievements, we carry out a comprehensive overview of the aptamers developed against these mosquito-borne infectious agents. Characteristics of the aptamers and their roles in diagnostic, therapeutic as well as other applications are emphasized.

Split light up aptamers as a probing tool for nucleic acids

Aptamers that bind non-fluorescent dyes and increase their fluorescence can be converted to fluorescent sensors. Here, we discuss and provide guidance for the design of split (binary) light up aptameric sensors (SLAS) for nucleic acid analysis. SLAS consist of two RNA or DNA strands and a fluorogenic organic dye added as a buffer component. The two strands hybridize to the analyzed DNA or RNA sequence and form a dye-binding pocket, followed by dye binding, and increase in its fluorescence. SLAS can detect nucleic acids in a cost-efficient label-free format since it does not require conjugation of organic dyes with nucleic acids. SLAS design is preferable over monolith fluorescent sensors due to simpler assay optimization and improved selectivity. RNA-based SLAS can be expressed in cells and used for intracellular monitoring and imaging biological molecules.

Promiscuous dye binding by a light-up aptamer: application for label-free multi-wavelength biosensing

Light-up DNA aptamers are promising label-free signal-transducers for biosensing applications due to their high chemical stability and low synthetic cost. Herein, we demonstrate that a dapoxyl DNA aptamer DAP-10-42 can be converted into a sensor generating a fluorescence signal at different wavelengths in the range of 500-660 nm depending on the dye that is present. This results from the discovered promiscuity of DAP-10-42 in binding fluorogenic dyes including arylmethane dyes. We have designed a split DAP-10-42 aptasensor for the detection of a katG gene fragment from Mycobacterium tuberculosis with a point mutation causing isoniazid resistance. Efficient interrogation of the gene fragment after nucleic acid sequence-based amplification (NASBA) is achieved directly in a protein-containing NASBA sample. This report lays a foundation for the application of the DAP-10-42 aptamer as a versatile sensing platform.

Developments in integrating nucleic acid isothermal amplification and detection systems for point-of-care diagnostics

Early disease detection through point-of-care (POC) testing is vital for quickly treating patients and preventing the spread of harmful pathogens. Disease diagnosis is generally accomplished using quantitative polymerase chain reaction (qPCR) to amplify nucleic acids in patient samples, permitting detection even at low target concentrations. However, qPCR requires expensive equipment, trained personnel, and significant time. These resources are not available in POC settings, driving researchers to instead utilize isothermal amplification, conducted at a single temperature, as an alternative. Common isothermal amplification methods include loop-mediated isothermal amplification, recombinase polymerase amplification, rolling circle amplification, nucleic acid sequence-based amplification, and helicase-dependent amplification. There has been a growing interest in combining such amplification methods with POC detection methods to enable the development of diagnostic tests that are well suited for resource-limited settings as well as developed countries performing mass screenings. Exciting developments have been made in the integration of these two research areas due to the significant impact that such approaches can have on healthcare. This review will primarily focus on advances made by North American research groups between 2015 and June 2020, and will emphasize integrated approaches that reduce user steps, reliance on expensive equipment, and the system's time-to-result.

Binary (Split) Light-up Aptameric Sensors

This Minireview discusses the design and applications of binary (also known as split) light-up aptameric sensors (BLAS). BLAS consist of two RNA or DNA strands and a fluorogenic organic dye added as a buffer component. When associated, the two strands form a dye-binding site, followed by an increase in fluorescence of the aptamer-bound dye. The design is cost-efficient because it uses short oligonucleotides and does not require conjugation of organic dyes with nucleic acids. In some applications, BLAS design is preferable over monolithic sensors because of simpler assay optimization and improved selectivity. RNA-based BLAS can be expressed in cells and used for the intracellular monitoring of biological molecules. BLAS have been used as reporters of nucleic acid association events in RNA nanotechnology and nucleic-acid-based molecular computation. Other applications of BLAS include the detection of nucleic acids, proteins, and cancer cells, and potentially they can be tailored to report a broad range of biological analytes.

Splitting aptamers and nucleic acid enzymes for the development of advanced biosensors

In analogy to split-protein systems, which rely on the appropriate fragmentation of protein domains, split aptamers made of two or more short nucleic acid strands have emerged as novel tools in biosensor set-ups. The concept relies on dissecting an aptamer into a series of two or more independent fragments, able to assemble in the presence of a specific target. The stability of the assembled structure can further be enhanced by functionalities that upon folding would lead to covalent end-joining of the fragments. To date, only a few aptamers have been split successfully, and application of split aptamers in biosensing approaches remains as promising as it is challenging. Further improving the stability of split aptamer target complexes and with that the sensitivity as well as efficient working modes are important tasks. Here we review functional nucleic acid assemblies that are derived from aptamers and ribozymes/DNAzymes. We focus on the thrombin, the adenosine/ATP and the cocaine split aptamers as the three most studied DNA split systems and on split DNAzyme assemblies. Furthermore, we extend the subject into split light up RNA aptamers used as mimics of the green fluorescent protein (GFP), and split ribozymes.

Short Duplex Module Coupled to G-Quadruplexes Increases Fluorescence of Synthetic GFP Chromophore Analogues

Aptasensors became popular instruments in bioanalytical chemistry and molecular biology. To increase specificity, perspective signaling elements in aptasensors can be separated into a G-quadruplex (G4) part and a free fluorescent dye that lights up upon binding to the G4 part. However, current systems are limited by relatively low enhancement of fluorescence upon dye binding. Here, we added duplex modules to G4 structures, which supposedly cause the formation of a dye-binding cavity between two modules. Screening of multiple synthetic GFP chromophore analogues and variation of the duplex module resulted in the selection of dyes that light up after complex formation with two-module structures and their RNA analogues by up to 20 times compared to parent G4s. We demonstrated that the short duplex part in TBA25 is preferable for fluorescence light up in comparison to parent TBA15 molecule as well as TBA31 and TBA63 stabilized by longer duplexes. Duplex part of TBA25 may be partially unfolded and has reduced rigidity, which might facilitate optimal dye positioning in the joint between G4 and the duplex. We demonstrated dye enhancement after binding to modified TBA, LTR-III, and Tel23a G4 structures and propose that such architecture of short duplex-G4 signaling elements will enforce the development of improved aptasensors.

Investigation of the interaction between split aptamer and vascular endothelial growth factor 165 using single molecule force spectroscopy

Understanding the binding of split aptamer/its target could become a breakthrough in the application of split aptamer. Herein, vascular endothelial growth factor (VEGF), a major biomarker of human diseases, was used as a model, and its interaction with split aptamer was explored with single molecule force spectroscopy (SMFS). SMFS demonstrated that the interaction force of split aptamer/VEGF₁₆₅ was 169.44 ± 6.59 pN at the loading rate of 35.2 nN/s, and the binding probability of split aptamer/VEGF₁₆₅ was dependent on the concentration of VEGF₁₆₅ . On the basis of dynamic force spectroscopy results, one activation barrier in the dissociation process of split aptamer/VEGF₁₆₅ complexes was revealed, which was similar to that of the intact aptamer/VEGF₁₆₅ . Besides, the dissociation rate constant (k_off ) of split aptamer/VEGF₁₆₅ was close to that of intact aptamer/VEGF₁₆₅ , and the interaction force of split aptamer/VEGF₁₆₅ was higher than the force of intact aptamer/VEGF₁₆₅ . It indicated that split aptamer also possessed high affinity with VEGF₁₆₅ . The work can provide a new method for exploring the interaction of split aptamer/its targets at single-molecule level.

Polymerization-driven successive collapse of DNA dominoes enabling highly sensitive cancer gene diagnosis

We propose a novel fluorescence assay method by designing a polymerization-driven DNA dominoes collapse (PDDC) strategy, enabling highly sensitive detection of p53 gene (as a model analyte) and single nucleotide polymorphism analysis.

Evolution of Hybridization Probes to DNA Machines and Robots

Hybridization probes are RNA or DNA oligonucleotides or their analogs that bind to specific nucleotide sequences in targeted nucleic acids (analytes) via Watson-Crick base pairs to form probe-analyte hybrids. Formation of a stable hybrid would indicate the presence of a DNA or RNA fragment complementary to the known probe sequence. Some of the well-known technologies that rely on nucleic acid hybridization are TaqMan and molecular beacon (MB) probes, fluorescent in situ hybridization (FISH), polymerase chain reaction (PCR), antisense, siRNA, and CRISPR/cas9, among others. Although invaluable tools for DNA and RNA recognition, hybridization probes suffer from several common disadvantages including low selectivity under physiological conditions, low affinity to folded single-stranded RNA and double-stranded DNA, and high cost of dye-labeled and chemically modified probes. Hybridization probes are evolving into multifunctional molecular devices (dubbed here "multicomponent probes", "DNA machines", and "DNA robots") to satisfy complex and often contradictory requirements of modern biomedical applications. In the definition used here, "multicomponent probes" are DNA probes that use more than one oligonucleotide complementary to an analyzed sequence. A "DNA machine" is an association of a discrete number of DNA strands that undergoes structural rearrangements in response to the presence of a specific analyte. Unlike multicomponent probes, DNA machines unify several functional components in a single association even in the absence of a target. DNA robots are DNA machines equipped with computational (analytic) capabilities. This Account is devoted to an overview of the ongoing evolution of hybridization probes to DNA machines and robots. The Account starts with a brief excursion to historically significant and currently used instantaneous probes. The majority of the text is devoted to the design of (i) multicomponent probes and (ii) DNA machines for nucleic acid recognition and analysis. The fundamental advantage of both designs is their ability to simultaneously address multiple problems of RNA/DNA analysis. This is achieved by modular design, in which several specialized functional components are used simultaneously for recognition of RNA or DNA analytes. The Account is concluded with the analysis of perspectives for further evolution of DNA machines into DNA robots.

Recent Development of Aptamer Sensors for the Quantification of Aflatoxin B1

Aflatoxin B1 (AFB1) is one of the most frequently-found mycotoxins in contaminated food. As the content of mycotoxins is particularly low in food, the development of probes to detect AFB1 in foods with high sensitivity and selectivity is an urgent social need for the evaluation of food quality. Numerous techniques have been developed to monitor AFB1. Nevertheless, most of them require cumbersome, labor-consuming, and sophisticated instruments, which have limited their application. An aptamer is a single, short nucleic acid sequence that is capable of recognizing different targets. Owing to their unique properties, aptamers have been considered as alternatives to antibodies. Aptasensors are considered to be an emerging strategy for the quantification of aflatoxin B1 with high selectivity and sensitivity. In this review, we summarize recent developments in colormetric, electrochemical, SERS, and fluorescent aptasensors for the quantification of AFB1. Finally, the perspectives and current challenges of aptasensors for AFB1 are outlined.

Targeted Detection of Single-Nucleotide Variations: Progress and Promise

Advances in nucleic acid sequencing and genotyping technologies have facilitated the discovery of an increasing number of single-nucleotide variations (SNVs) associated with disease onset, progression, and response to therapy. The reliable detection of such disease-specific SNVs can ensure timely and effective therapeutic action, enabling precision medicine. This has driven extensive efforts in recent years to develop novel methods for the fast and cost-effective analysis of targeted SNVs. In this Review, we highlight the most recent and significant advances made toward the development of such methodologies.