Real-Time Monitoring of Pesticide Translocation in Tomato Plants by Surface-Enhanced Raman Spectroscopy

Plasmonic Nanostructures Grown from Reacting Droplet-In-Microwell Array on Flexible Films for Quantitative Surface-Enhanced Raman Spectroscopy in Plant Wearable In Situ Detection

Plant wearable detection has garnered significant interest in advancing agricultural intelligence and promoting sustainable food production amidst the challenges of climate change. Accurately monitoring plant health and agrochemical residue levels necessitates qualities such as precision, affordability, simplicity, and noninvasiveness. Here, a novel attachable plasmonic film is introduced and designed for on-site detection of agrochemical residues utilizing surface-enhanced Raman spectroscopy (SERS). By functionalizing a thin polydimethylsiloxane film with silver nanoparticles via controlled droplet reactions in micro-well arrays, a plasmonic film is achieved that not only maintains optical transparency for precise analyte localization but also conforms closely to the plant surface, facilitating highly sensitive SERS measurements. The reliability of this film enables accurate identification and quantification of individual compounds and their mixtures, boasting an ultra-low detection limit ranging from 10-16 to 10-13 m, with mini mal relative standard deviation. To showcase its potential, on-field detection of pesticide residues on fruit surfaces is conducted using a handheld Raman spectrometer. This advancement in fabricating plasmonic nanostructures on flexible films holds promise for expanding SERS applications beyond plant monitoring, including personalized health monitoring, point-of-care diagnosis, wearable devices for human-machine interface, and on-site monitoring of environmental pollutants.

Current and emerging nanotechnology for sustainable development of agriculture: Implementation design strategy and application

Recently, agriculture systems have faced numerous challenges involving sustainable nutrient use efficiency and feeding, environmental pollution especially heavy metals (HMs), infection of harmful microorganisms, and maintenance of crop production quality during postharvesting and packaging. Nanotechnology and nanomaterials have emerged as powerful tools in agriculture applications that provide alternatives or support traditional methods. This review aims to address and highlight the current overarching issue and various implementation strategies of nanotechnology for sustainable agriculture development. In particular, the current progress of different nano-fertilizers (NFs) systems was analyzed to show their advances in enhancing the uptake and translocations in plants and improving nutrient bioavailability in soil. Also, the design strategy and application of nanotechnology for rapid detection of HMs and pathogenic diseases in plant crops were emphasized. The engineered nanomaterials have great potential for biosensors with high sensitivity and selectivity, high signal throughput, and reproducibility through various detection approaches such as Raman, colorimetric, biological, chemical, and electrical sensors. We obtain that the development of microfluidic and lab-on-a-chip (LoC) technologies offers the opportunity to create on-site portable and smart biodevices and chips for real-time monitoring of plant diseases. The last part of this work is a brief introduction to trends in nanotechnology for harvesting and packaging to provide insights into the overall applications of nanotechnology for crop production quality. This review provides the current advent of nanotechnology in agriculture, which is essential for further studies examining novel applications for sustainable agriculture.

Ecofriendly polysaccharide-based alginate/pluronic F127 semi-IPN hydrogel with magnetic collectability for precise release of pesticides and sustained pest control

Controlled-release systems are crucial for efficient pesticide utilization and environmental protection in agricultural production. The utilization of polysaccharide-based materials derived from biopolymers as carriers for controlling pesticide release holds significant potential. In this work, a reversible near infrared-responsive polysaccharide-based hydrogel (RNPH) was fabricated by employing a semi-interpenetrating polymer network (alginate-FeIII/pluronic F127) as a carrier to encapsulate Fe3O4@polydopamine (FP) and emamectin benzoate (EB)-loaded hollow mesoporous silica. The incorporation of FP into the RNPH introduced a photothermal effect, enabling the precise release of EB through reversible shrinkage of the hydrogel upon NIR irradiation. Additionally, the presence of magnetic Fe3O4 in the system facilitated the rapid removal of remaining RNPH from the environment using a magnet, reducing EB residue. Importantly, RNPH exhibited exceptional controlled-release performance and could be reused for at least 4 cycles. Furthermore, the anti-photolysis ability of EB protected by RNPH was enhanced by 4.8 times compared to EB alone. Moreover, RNPH significantly improved the adhesion of EB to foliar surfaces, thereby reducing the loss of EB while ensuring crop safety. Therefore, the polysaccharide-based hydrogel holds promise as a versatile carrier for the precise release of EB, offering valuable applications in enhancing pesticide bioavailability and promoting environmental safety.

Real-Time Monitoring of Translocation, Dissipation, and Cumulative Risk of Maleic Hydrazide in Potato Plants and Tubers by Ion Exclusion Chromatography

In this paper, a high-performance ion exclusion chromatographic (ICE) method was developed and applied for monitoring maleic hydrazide (MH) translocation in complex potato plant tissue and tuber matrices. After middle leaf uptake, most MH was trapped and dissipated in the middle leaf, and the rest was transported to other parts mainly through the phloem. Soil absorption significantly reduced the uptake efficiency of the root system, in which MH was partitioned to dissipate in root protoplasts or transfer through the xylem and persisted in the plant. Tuber uptake enabled MH to remain in the flesh and maintain stable levels under storage conditions, but during germination, MH was translocated from the flesh to the growing buds, where it dissipated through the short-day photoperiodic regime. The results demonstrated successful application of the ICE method and provided necessary insights for real-time monitoring of MH translocation behavior to effectively improve potato edible safety.

Understanding the impact of a non-ionic surfactant alkylphenol ethoxylate on surface-enhanced Raman spectroscopic analysis of pesticides on apple surfaces

Pesticide active ingredients (AIs) are often applied with adjuvants to facilitate the stability and functionality of AIs in agricultural practice. The objective of this study is to investigate the role of a common non-ionic surfactant, alkylphenol ethoxylate (APEO), on the surface-enhanced Raman spectroscopic (SERS) analysis of pesticides as well as its impact on pesticide persistence on apple surfaces, as a model fresh produce surface. The wetted areas of two AIs (thiabendazole and phosmet) mixed with APEO were determined respectively to correct the unit concentration applied on apple surfaces for a fair comparison. SERS with gold nanoparticle (AuNP) mirror substrates was applied to measure the signal intensity of AIs with and without APEO on apple surfaces after a short-term (45 min) and a long-term (5 days) exposure. The limit of detection (LOD) of thiabendazole and phosmet using this SERS-based method were 0.861 ppm and 2.883 ppm, respectively. The result showed that APEO decreased the SERS signal for non-systemic phosmet, while increased SERS intensity of systemic thiabendazole on apple surfaces after 45 min pesticide exposure. After 5 days, the SERS intensity of thiabendazole with APEO was higher than thiabendazole alone, and there was no significant difference between phosmet with and without APEO. Possible mechanisms were discussed. Furthermore, a 1% sodium bicarbonate (NaHCO₃) washing method was applied to test the impact of APEO on the persistence of the residues on apple surfaces after short-term and long-term exposures. The results indicated that APEO significantly enhanced the persistence of thiabendazole on plant surfaces after a 5-day exposure, while there was no significant impact on phosmet. The information obtained facilitates a better understanding of the impact of the non-ionic surfactant on SERS analysis of pesticide behavior on and in plants and helps further develop the SERS method for studying complex pesticide formulations in plant systems.

Oriented Design of Transition-Metal-Oxide Hollow Multishelled Micropolyhedron Derived from Bimetal-Organic Frameworks for the Electrochemical Detection of Multipesticide Residues

Transition-metal oxides (TMOs) with a hollow multishelled structure have emerged as highly potential materials for high-performance electrochemical sensing, benefiting from their superior electronic conductivity, exceptionally large specific surface area, excellent stability, and electrochemistry properties. In particular, binary TMOs are expected to outperform unitary TMOs due to the synergistic effect of the different metals. Herein, MnCo₂O_4.5 hollow quadruple-shelled porous micropolyhedrons (MnCo₂O_4.5 HoQS-MPs) were prepared and employed to construct an ultrasensitive sensing platform for a multipesticide assay. Profiting from complex hollow interior structures and abundant active sites, the MnCo₂O_4.5 HoQS-MPs manifest outstanding electrochemical properties as electrode materials for the pesticide assay. The MnCo₂O_4.5 HoQS-MP-based biosensor demonstrated remarkable performance for monocrotophos, methamidophos, and carbaryl detection, with wide linear ranges, as well as low detection limits. This work unveils a new pathway for the ultrasensitive detection of pesticides and demonstrates tremendous potential for detecting other environmentally deleterious chemicals.

Core-shell Au@ZIF-67-based pollutant monitoring of thiram and carbendazim pesticides

A sensitive and stable substrate plays a vital role in the Raman spectroscopic techniques as an analytical method for detecting pesticides effectively from the environment. Enhancing signals from nanoparticles are weak and inconsistent in repeatability since analytes tend to degrade quickly under laser exposure. Herein, a novel substrate of Au@ZIF-67 is prepared on octahedral AuNPs by trapping pesticide molecules with small three-dimensional volumes by the flexibility of ZIF-67 for rapid detection with high sensitivity and stability. The two types of thiram and carbendazim pesticides, which are environmental pollutants that affect biodiversity, were successfully absorbed in Au@ZIF-67 nanostructures by adsorption-desorption equilibrium for analytical purposes in Raman spectroscopy. Spectra calculations of the thiram and carbendazim molecules on 8 atoms of Au using DFT were compared with the experimental data. The SERS enhancement factors for thiram and carbendazim were estimated to be 1.91 × 10⁸ and 3.12 × 10⁸, respectively, with the LOD values of trace amounts of ∼10^-10 mol L^-1. The novel substrate of Au@ZIF-67 is a propitious platform for detecting thiram and carbendazim in trace amounts, providing a helpful strategy for detecting residues with high performance in the environment at the laboratory and practical scales.

Real-time and in situ monitoring of organosilicon-induced thiram penetration into cabbage leaves by surface-enhanced Raman scattering mapping

BACKGROUND

Understanding pesticide penetration behavior is important for effective application of pesticides. However, there is a lack of an effective method to monitor pesticide penetration behavior and its changing process. In the present study, a novel surface-enhanced Raman scattering (SERS) mapping method was used for real-time and in situ tracking of the penetration behaviors of thiram and thiram-organosilicon mixture on cabbage leaves.

RESULTS

The results suggest that thiram has very weak ability to penetrate into cabbage leaves. However, when the thiram-organosilicon mixture was placed on leaf surfaces, a clear thiram signal was detected inside the leaf after 2 h of exposure, a strong signal was observed after 12 h, and the penetration depth of thiram was approximately 200 μm after 48 h.

CONCLUSION

SERS mapping was demonstrated to be a reliable method for in situ monitoring of organosilicon-induced thiram penetration into cabbage leaf over time. The present study provides a new reference for rationally selecting adjuvants, effectively applying pesticides, and reducing pesticides residue in food. © 2022 Society of Chemical Industry.

Nanosensor Applications in Plant Science

Plant science is a major research topic addressing some of the most important global challenges we face today, including energy and food security. Plant science has a role in the production of staple foods and materials, as well as roles in genetics research, environmental management, and the synthesis of high-value compounds such as pharmaceuticals or raw materials for energy production. Nanosensors—selective transducers with a characteristic dimension that is nanometre in scale—have emerged as important tools for monitoring biological processes such as plant signalling pathways and metabolism in ways that are non-destructive, minimally invasive, and capable of real-time analysis. A variety of nanosensors have been used to study different biological processes; for example, optical nanosensors based on Förster resonance energy transfer (FRET) have been used to study protein interactions, cell contents, and biophysical parameters, and electrochemical nanosensors have been used to detect redox reactions in plants. Nanosensor applications in plants include nutrient determination, disease assessment, and the detection of proteins, hormones, and other biological substances. The combination of nanosensor technology and plant sciences has the potential to be a powerful alliance and could support the successful delivery of the 2030 Sustainable Development Goals. However, a lack of knowledge regarding the health effects of nanomaterials and the high costs of some of the raw materials required has lessened their commercial impact.

New rapid detection method of total chlorogenic acids in plants using SERS based on reusable Cu2O-Ag substrate

A new method for rapidly detecting of total chlorogenic acids (CGAs) in plants by surface-enhanced Raman spectroscopy (SERS) based on reusable Cu₂O-Ag substrate was developed in this study. The Cu₂O-Ag substrate prepared by the in-situ growth method had high uniformity with peak intensity relative standard deviation (RSD) of 5.27%, repeatability with peak intensity RSD of 3.58%, and sensitivity with an analytical enhancement factor of 1.27 × 10⁵ for detecting CGAs. Furthermore, the substrate had excellent reusability, after it was reused for seven cycles, the signal strength of CGAs was still above 80% of initial. Compared with the standard method of high-performance liquid chromatography (HPLC), the SERS method can successfully analyze the contents of total CGAs in plants, such as Stevia rebaudiana leaves, coffee beans, Lonicera japonica leaves, and Eucommia ulmoides flowers, with recovery rate from 93.26% to 112.65%, and the limit of detection was 0.13 μg/mL. The total CGAs content of Stevia rebaudiana leaves samples detected by HPLC and SERS have good consistency with R = 0.9760 and RMSE = 3286 mg/kg. Furthermore, the SERS method only needed less than 1 min, one standard and reusable substrate in this study to analyze, which can further reduce the cost of method analysis. Therefore, the SERS method with the appropriate substrate can provide a rapid, accurate, and economic way to detect the total CGAs in plants.

Rolling Circle Amplification-based Copper Nanoparticle Synthesis on Cyclic Olefin Copolymer Substrate and Its Application in Aptasensor

This study aimed to develop a label-free fluorescent aptasensor for the detection of diazinon (DZN) on a cyclic olefin copolymer (COC) substrate. The aptasensor design was based on rolling circle amplification (RCA) technology and the use of self-assembled copper nanoparticles (CuNPs). A dual-function (DF) probe, capable of binding to circular DNA and an aptamer, was designed and immobilized on a COC-bottom 96-well plate. An aptamer was used for selective recognition of DZN, and the specific site of the aptamer that strongly reacted with DZN was successfully identified using circular dichroism (CD) analysis. In presence of DZN, the aptamer and DZN formed a strong complex, thus providing an opportunity for hybridization of the DF probe and circular DNA, thereby initiating an RCA reaction. Repetitive poly thymine (T) sequence with a length of 30-mer, generated in the RCA reaction, served as a template for the synthesis of fluorescent copper nanoparticles, emitting an orange fluorescence signal (at approximately 620 nm) proportional to the amount of RCA product, within 10 min under UV irradiation. The CuNP fluorescence was imaged and quantified using an image analysis software. A linear correlation of the fluorescence signal was confirmed in the DZN concentration range of 0.1–3 ppm, with a detection limit of 0.15 ppm. Adoption of a label-free detection method, utilizing RCA and fluorescent CuNPs on COC substrates, reduced the need for complex equipment and requirements for DZN analysis, thereby representing a simple and rapid sensing method circumventing the limitations of current complex and labor-intensive methods.

Reviewing chemical and biological risks in urban agriculture: A comprehensive framework for a food safety assessment of city region food systems

Attention to urban agriculture (UA) has recently grown among practitioners, scientists, and the public, resulting in several initiatives worldwide. Despite the positive perception of modern UA and locally grown, fresh produce, the potential food safety risks connected to these practices may be underestimated, leading to regulatory gaps. Thus, there is a need for assessment tools to evaluate the food safety risks connected to specific UA initiatives, to assist practitioners in self-evaluation and control, and to provide policy makers and scholars a means to pursue and assess food safety in city regions, avoiding either a lack or an excess of regulation that could ultimately hinder the sector. To address this aim, this paper reviews the most recent and relevant literature on UA food safety assessments. Food safety indicators were identified first. Then, a food safety assessment framework for UA initiatives was developed. The framework uses business surveys and food analyses (if available) as a data source for calculating a food safety index for single UA businesses and the whole UA landscape of a given city region. The proposed framework was designed to allow its integration into the CRFS (City Region Food System) toolkit developed by FAO (Food and Agriculture Organization of the United Nations), RUAF foundation (Resource Centres on Urban Agriculture and Food Security) and Wilfrid Laurier University.

•

Connection of several biological and chemical food safety risks to UA techniques.

•

Identifiable food safety risk factors for diverse UA practices.

•

Framework for the assessment of food safety levels of UA initiatives.

•

Development of a risk-based assessment that can be integrated into the FAO CRFS framework.

Spatiotemporal Visualization of Insecticides and Fungicides within Fruits and Vegetables Using Gold Nanoparticle-Immersed Paper Imprinting Mass Spectrometry Imaging

Food safety issues caused by pesticide residue have exerted far-reaching impacts on human daily life, yet the available detection methods normally focus on surface residue rather than pesticide penetration to the internal area of foods. Herein, we demonstrated gold nanoparticle (AuNP)-immersed paper imprinting mass spectrometry imaging (MSI) for monitoring pesticide migration behaviors in various fruits and vegetables (i.e., apple, cucumber, pepper, plum, carrot, and strawberry). By manually stamping food tissues onto AuNP-immersed paper, this method affords the spatiotemporal visualization of insecticides and fungicides within fruits and vegetables, avoiding tedious and time-consuming sample preparation. Using the established MSI platform, we can track the migration of insecticides and fungicides into the inner region of foods. The results revealed that both the octanol-water partition coefficient of pesticides and water content of garden stuffs could influence the discrepancy in the migration speed of pesticides into food kernels. Taken together, this nanopaper imprinting MSI is poised to be a powerful tool because of its simplicity, rapidity, and easy operation, offering the potential to facilitate further applications in food analysis. Moreover, new perspectives are given to provide guidelines for the rational design of novel pesticide candidates, reducing the risk of food safety issues caused by pesticide residue.

Challenges and potential solutions for nanosensors intended for use with foods

Nanotechnology-adapted detection technologies could improve the safety and quality of foods, provide new methods to combat fraud and be useful tools in our arsenal against bioterrorism. Yet despite hundreds of published studies on nanosensors each year targeted to the food and agriculture space, there are few nanosensors on the market in this area and almost no nanotechnology-enabled methods employed by public health agencies for food analysis. This Review shows that the field is currently being held back by technical, regulatory, political, legal, economic, environmental health and safety, and ethical challenges. We explore these challenges in detail and provide suggestions about how they may be surmounted. Strategies that may have particular effectiveness include improving funding opportunities and publication venues for nanosensor validation, social science and patent landscape studies; prioritizing research and development of nanosensors that are specifically designed for rapid analysis in non-laboratory settings; and incorporating platform cost and adaptability into early design decisions.

Towards a point-of-care SERS sensor for biomedical and agri-food analysis applications: a review of recent advancements

The growing demand for reliable and robust methodology in bio-chemical sensing calls for the continuous advancement of sensor technologies. Over the last two decades, surface-enhanced Raman spectroscopy (SERS) has emerged as one of the most promising analytical techniques for sensitive and trace analysis or detection in biomedical and agri-food applications. SERS overcomes the inherent sensitivity limitation associated with Raman spectroscopy, which provides vibrational "fingerprint" spectra of molecules that makes it unique and versatile among other spectroscopy techniques. This paper comprehensively reviews the recent advancements of SERS for biomedical, food and agricultural applications over the last 6 years, and we envision that, in the near future, some of these platforms have the potential to be translated as a point-of-care and rapid sensor for real-life end-user applications. The merits and limitations of various SERS sensor designs are analysed and discussed based on critical features such as sensitivity, specificity, usability, repeatability and reproducibility. We conclude by highlighting the opportunities and challenges in the field while stressing the technological gaps to be addressed in realizing commercially viable point-of-care SERS sensors for practical biomedical and agri-food technological applications.

Investigating the migration of pyrethroid residues between mung bean sprouts and growth media

To study the migration of pyrethroids (cypermethrin, deltamethrin, fenvalerate, and permethrin) from growth media (soil or water) to mung bean sprouts, pyrethroid residues were quantified using polystyrene-magnetic nanoparticles and HPLC-PDA. Pyrethroids reductions in growth media followed a double-exponential decline model (RMSE of 0.0068-0.1845), while the higher accumulation in the vegetable were observed in roots (0.50-6.75 mg/kg) than in sprouts (0.12-2.01 mg/kg). The accumulation was influenced by pyrethroid species, type of growth media, and plant parts. This study contributed a novel prediction method to assess the migration of pesticides from the growth media to the vegetable with the satisfactory sensitivity of the proposed detection method. The recoveries, detection limits (LOD), and quantification limits (LOQ) were 82.9-112.1%, 0.0627-0.1974 µg/L and 0.1892-0.6279 µg/L, respectively, for four pyrethroids. The research provided solid basis for future study of crops that can be used for bioconcentration of chemical hazards in environments.

Unsupported liquid-state platform for SERS-based determination of triazophos

A highly reproducible surface-enhanced Raman scattering (SERS) unsupported liquid-state platform (ULP) was developed for accurate quantitative determination of triazophos. Herein, citrate-reduced Ag NPs suspension was concentrated and placed in a stainless steel perforated template to form the SERS ULP. The relative standard deviation of the SERS measurements was less than 5% (n ≥ 10), and the R² of the calibration curve was 0.994. The developed SERS ULP was applied for determination of triazophos in spiked agricultural products (rice, cabbage, and apple). Experiment results showed that the coefficient of variation ranged from 5.3 to 6.2% for intra-day and from 5.5 to 6.3% for inter-day (n = 3), which proved excellent SERS reproducibility. Moreover, the results were in good agreement with those from HPLC analysis. As a liquid-state SERS substrate, the highly reproducible ULP can perform precision quantitative analysis without surface modification of NPs, which is a significant improvement. This method provides a new perspective for quantitative SERS analysis of pesticide residues. Graphical abstract.

Fluorescence sensor for organophosphorus pesticide detection based on the alkaline phosphatase-triggered reaction

The threat of organophosphorus pesticide (OPP) residue to food safety and human health has caused widespread concern. In this paper, a sensitive fluorescence sensor for OPP detection was constructed based on the alkaline phosphatase (ALP) -triggered in situ reaction. In this method, ALP catalyses the dephosphorylation of the substrate l-ascorbic acid 2-phosphate sesquimagnesium salt hydrate (AAP) to generate l-ascorbic acid (AA). AA instantly combines with o-phenylenediamine (OPD) to form 3-(1,2-dihydroxyethyl)furo[3,4-b]quinoxalin-1(3H)-one (DFQ), which contains a quinoxaline core skeleton fluorophore and emits a strong fluorescence intensity at 425 nm. The existence of OPPs inhibits the activity of ALP and the production of AA and DFQ. As a result, the fluorescence intensity obviously decreases. Under optimal conditions, the fluorescence intensity linearly depends on the logarithm of chlorpyrifos concentration over a wide range of 20 pg/mL ∼1000 ng/mL with a detection limit of 15.03 pg/mL (S/N = 3), which is lower than the previously reported values. The sensor with its satisfactory accuracy and precision has been successfully applied to the detection of chlorpyrifos in leeks and celery samples with recoveries of 94.5-106.7% and an inter-assay relative standard deviation (RSD) below 11.51%. OPPs can be semiquantitatively determined by the colour changes in ultraviolet light. The superiority of the sensor is due to its visual simplicity without complex fluorescence labelling procedures and costly instruments.

Facile Removal of Phytochromes and Efficient Recovery of Pesticides Using Heteropore Covalent Organic Framework-Based Magnetic Nanospheres and Electrospun Films

Nontargeted analysis of food safety requires selective removal of interference matrices and highly efficient recovery of chemical hazards. Porous materials such as covalent organic frameworks (COFs) show great promise in selective adsorption of matrix molecules via size selectivity. Considering the complexity of interference matrices, we prepared crystalline heteropore COFs whose two kinds of pores have comparable sizes to those of several common phytochromes, main interference matrices in vegetable sample analysis. By controlling the growth of COFs on the surface of Fe3O4 nanoparticles or by utilizing a facile co-electrospinning method, heteropore COF-based magnetic nanospheres or electrospun nanofiber films were prepared, respectively. Both the nanospheres and the films maintain the dual-pore structures of COFs and show good stability and excellent reusability. Via simple magnetic separation or immersion operation, respectively, they were successfully used for the complete removal of phytochromes and highly efficient recovery of 15 pesticides from the extracts of four vegetable samples, and the recoveries are in the range of 83.10-114.00 and 60.52-107.35%, respectively. Film-based immersion operation gives better sample pretreatment performance than the film-based filtration one. This work highlights the great application potentials of heteropore COFs in sample pretreatment for nontargeted analysis, thus opening up a new way to achieve high-performance sample preparation in many fields such as food safety analysis, environment monitoring, and so on.

From single cells to complex tissues in applications of surface-enhanced Raman scattering

This tutorial review explores how three of the most common methods for introducing nanoparticles to single cells for surface-enhanced Raman scattering measurements can be adapted for experiments with complex tissues.