Programmed Dual-Functional DNA Tweezer for Simultaneous and Recognizable Fluorescence Detection of microRNA and Protein

Novel Self-Powered Biosensor Based on Au Nanoparticles @ Pd Nanorings and Catalytic Hairpin Assembly for Ultrasensitive miRNA-21 Assay

An ultrasensitive self-powered biosensor is constructed for miRNA-21 detection based on Au nanoparticles @ Pd nanorings (Au NPs@Pd NRs) and catalytic hairpin assembly (CHA). The Au NPs@Pd NRs possess excellent electrical conductivity to improve the electron transfer rate and show good elimination of byproduct H2O2 to assist glucose oxidase (GOD) to catalyze glucose; CHA is used as an amplification strategy to effectively enhance the sensitivity of the biosensor. To further amplify the output signal, a capacitor is integrated into the self-powered biosensor. With multiple signal amplification strategies, the self-powered biosensor possesses a linear range of 0.1-10-4 fM and a lower limit of detection (LOD) of 0.032 fM (S/N = 3). In addition, the as-prepared self-powered biosensor displays potential applicability in the assay toward miRNA-21 in human serum samples.

Ultrasensitive Photoelectrochemical Biosensor for Dual-miRNAs Detection Based on Molecular Logic Gates and Methylene Blue Sensitized ZnO@CdS@Au Nanorods

The occurrence of cancer is often closely related to multiple tumor markers, so it is important to develop multitarget detection methods. By the proper design of the input signals and logical operations of DNA logic gates, detection and diagnosis of cancer at different stages can be achieved. For example, in the early stages, specific input signals can be designed to correspond to early specific tumor markers, thereby achieving early cancer detection. In the late stage, logic gates for multitarget detection can be designed to simultaneously detect multiple biomarkers to improve diagnostic accuracy and comprehensiveness. In this work, we constructed a dual-target-triggered DNA logic gate for anchoring DNA tetrahedra, where methylene blue was embedded in the DNA tetrahedra to sensitize ZnO@CdS@Au, achieving ultrasensitive detection of the target substance. We tested the response of AND and OR logic gates to the platform. For AND logic gates, the sensing platform only responds when both miRNAs are present. In the concentration range of 10 aM to 10 nM, the photoelectric signal gradually increases with an increase of the target concentration. Subsequently, we used OR logic gates for miRNA detection. Even if only one target exists, the sensing platform exhibits excellent performance. Similarly, within the concentration range of 10 aM to 10 nM, the photoelectric signal gradually increases with an increase of the target concentration. The minimum detection limit is 1.10 aM. Whether it is the need to detect multiple targets simultaneously or only one of them, we can achieve it by selecting the appropriate logic gate. This strategy holds promising application prospects in fields such as biosensing, medical diagnosis, and environmental monitoring.

DNA-Based Molecular Machines: Controlling Mechanisms and Biosensing Applications

The rise of DNA nanotechnology has driven the development of DNA-based molecular machines, which are capable of performing specific operations and tasks at the nanoscale. Benefitting from the programmability of DNA molecules and the predictability of DNA hybridization and strand displacement, DNA-based molecular machines can be designed with various structures and dynamic behaviors and have been implemented for wide applications in the field of biosensing due to their unique advantages. This review summarizes the reported controlling mechanisms of DNA-based molecular machines and introduces biosensing applications of DNA-based molecular machines in amplified detection, multiplex detection, real-time monitoring, spatial recognition detection, and single-molecule detection of biomarkers. The challenges and future directions of DNA-based molecular machines in biosensing are also discussed.

Proximity hybridization induced molecular machine for signal-on electrochemical detection of α-synuclein oligomers

α-synuclein oligomer is a marker of Parkinson's disease. The traditional enzyme-linked immunosorbent assay for α-synuclein oligomer detection is not conducive to large-scale application due to its time-consuming, high cost and poor stability. Recently, DNA-based biosensors have been increasingly used in the detection of disease markers due to their high sensitivity, simplicity and low cost. In this study, based on the DNAzyme-driven DNA bipedal walking method, we developed a signal-on electrochemical sensor for the detection of α-syn oligomers. Bipedal DNA walkers have a larger walking area and faster walking kinetics, providing higher amplification efficiency compared to conventional DNA walkers. The DNA walker is driven via an Mg2+-dependent DNAzyme, and the binding-induced DNA walker will continuously clamp the MB, resulting in the proliferation of Fc confined near the GE surface. The linear range and limit of detection were 1 fg/mL to 10 pg/mL and 0.57 fg/mL, respectively. The proposed signal-on electrochemical sensing strategy is more selective. It will play a significant role in the sensitive and precise electrochemical analysis of other proteins.

3D walkable DNA gears for ultrasensitive detection of multiple microRNAs in lung cancer cell lysates

As a tumor biomarker with therapeutic application potential, microRNA (miRNA) was crucial for the accurate and sensitive detection of early-stage tumors. Herein, a unique three dimensional (3D) DNA nanomachine (DNM) was created, which was capable detecting lung cancer-related biomarkers miRNA-21, miRNA-205 and miRNA-125b in lung cancer cell lysates with extreme sensitivity. The 3D DNM was composed of DNA scissors and three flexible walkable DNA gears modified with various species of silver nanoclusters (AgNCs). Based on the flexibility of DNA scissors and the walkability of DNA gears, neighboring DNA gears closed the distance between different species of AgNCs by walking in the presence of targets, generating fluorescence resonance energy transfer (FRET) effect and emitting different kinds of fluorescence to complete the highly sensitive detection of single targets and multiple targets. The findings demonstrated that a linear model provided an excellent match for the association between fluorescence signal and target miRNAs. For miRNA-21, miRNA-205, and miRNA-125b, the limits of detection (LODs) (signal/noise = 3) were 4.2 pmol/L (pM), 6.3 pM, and 10.2 pM, respectively. Their recoveries in A549 cell lysate samples ranged from 95.3 to 108.8 % with relative standard deviations of 1.26 %-4.88 %. Satisfactorily, the 3D DNM displayed exceptional analytical performance with high sensitivity and stability, strong specificity and reproducibility, which was triumphantly employed to identify miRNAs in tumor cell lysates, providing a workable technique in creating adaptable nanostructure for dependable bioanalysis and clinical diagnosis of cancer biomarkers.

Bubble DNA tweezer: A triple-conformation sensor responsive to concentration-ratios

DNA tweezers, with their elegant simplicity and flexibility, have been pivotal in biosensing and DNA computing. However, conventional tweezers are confined to a binary transformation pre/post target signal recognition, limiting them to presence/absence judgments. This study introduces bubble DNA tweezers (BDT), capable of three distinct conformations based on variable target signal ratios. In contrast to traditional compact tweezers, BDT features a looser structure centered around a non-complementary bubble domain located between the tweezer arms' connecting axis and target signal recognition jaws. This bubble triggers toehold-free DNA strand displacement, leading to three conformational changes at different target signal concentrations. BDT detects presence/absence and true concentration with remarkable specificity and sensitivity. This adaptability is not confined to ideal scenarios, proving valuable in complex, noisy environments. Our method facilitates target DNA/miRNA signal quantification within a specific length range, promising applications in clinical research and environmental detection, while inspiring future biological assay innovations.

Programmable DNA tweezers-SDA for ultra-sensitive signal amplification fluorescence sensing strategy

BACKGROUND

DNA tweezers, classified as DNA nanomachines, have gained prominence as multifunctional biosensors due to their advantages, including a straightforward structure, response mechanism, and high programmability. While the DNA tweezers demonstrate simultaneous, rapid, and stable responses to different targets, their detection sensitivity requires enhancement. Some small molecules, such as mycotoxins, often require more sensitive detection due to their extremely high toxicity. Therefore, more effective signal amplification strategies are needed to further enhance the sensitivity of DNA tweezers in biosensing.

RESULTS

We designed programmable DNA tweezers that detect small-molecule mycotoxins and miRNAs through simple sequence substitution. While the DNA tweezers demonstrate simultaneous, rapid, and stable responses to different targets, their detection sensitivity requires enhancement. We introduced the Strand Displacement Amplification (SDA) technique to address this limitation, proposing a strategy of novel programmable DNA tweezers-SDA ultrasensitive signal amplification fluorescence sensing. We specifically investigate the effectiveness of this approach concerning signal amplification for two critical mycotoxins: aflatoxin B1 (AFB1) and zearalenone (ZEN). Results indicate that the detection ranges of AFB1 and ZEN via this strategy were 1-10,000 pg mL -1 and 10-100,000 pg mL -1, respectively, with corresponding detection limits of 0.933 pg mL -1 and 1.07 pg mL -1. Compared with the DNA tweezers direct detection method for mycotoxins, the newly constructed programmable DNA tweezers-SDA fluorescence sensing strategy achieved a remarkable 104-fold increase in the detection sensitivity for AFB1 and ZEN.

SIGNIFICANCE

The constructed programmable DNA tweezers-SDA ultrasensitive signal-amplified fluorescence sensing strategy exhibits excellent detection performance for mycotoxins. The superb versatility of this strategy allows the developed method to be easily used for detecting other analytes by simply replacing the aptamer and cDNA, which has incredible potential in various fields such as food safety screening, clinical diagnostics, and environmental analysis.

Dual-microRNA-Controlled Electrochemiluminescence Biosensor for Breast Cancer Diagnosis and Supplemental Identification of Breast Cancer Metastasis

Breast cancer remains the most frequently diagnosed cancer globally, and the metastasis of this malignancy is the primary cause of mortality in breast cancer patients. Hence, prompt diagnosis and timely detection of metastatic breast cancer are critical for effective therapeutic intervention. Both progression and metastasis of this malignancy are closely associated with aberrant expression of specific microRNAs (miRNAs) and enzymes. To facilitate breast cancer diagnosis and concomitant identification of metastatic breast cancer, we have engineered an innovative electrochemiluminescence (ECL)-based sensing platform integrated with enzyme-free DNA amplification circuits for dual functionality. Specifically, microRNA-21 (miR-21) is employed as a biomarker for breast cancer, and miR-21 induces the quenching of the ECL signal from luminophores via a strategically designed catalytic three-hairpin assembly (CTHA) circuit. Subsequently, miR-105 levels are measured via toehold-mediated strand displacement reactions (TSDR). Here, miR-105 restores the initially quenched ECL signal, enabling the assessment of the metastatic propensity. Our experimental data demonstrate that the devised ECL biosensor offers broad linear detection ranges and low detection limits for both miR-21 and miR-105. Importantly, our novel platform was also successfully validated by using cellular and serum samples. This biosensor not only discriminates breast cancer cell lines MCF-7 and MDA-MB-231 from nonbreast cancer cells like HepG2, TPC-1, and HeLa, but it also distinguishes between malignant MCF-7 and metastatic MDA-MB-231 cells. Consequently, our novel approach holds significant promise for clinical applications and precise cancer screening.

Emerging multianalyte biosensors for the simultaneous detection of protein and nucleic acid biomarkers

Traditionally, biosensors are designed to detect one specific analyte. Nevertheless, disease progression is regulated in a highly interactive way by different classes of biomolecules like proteins and nucleic acids. Therefore, a more comprehensive analysis of biomarkers from a single sample is of utmost importance to further improve both, the accuracy of diagnosis as well as the therapeutic success. This review summarizes fundamentals like biorecognition and sensing strategies for the simultaneous detection of proteins and nucleic acids and discusses challenges related to multianalyte biosensor development. We present an overview of the current state of biosensors for the combined detection of protein and nucleic acid biomarkers associated with widespread diseases, among them cancer and infectious diseases. Furthermore, we outline the multianalyte analysis in the rapidly evolving field of single-cell multiomics, to stress its significance for the future discovery and validation of biomarkers. Finally, we provide a critical perspective on the performance and translation potential of multianalyte biosensors for medical diagnostics.

Application of DNA Nanotweezers in biosensing: Nanoarchitectonics and advanced challenges

Deoxyribonucleic acid (DNA) is a carrier of genetic information. DNA hybridization is characterized by predictability, diversity, and specificity owing to the strict complementary base-pairing assembly mode, which stimulates the use of DNA to build a variety of nanomachines, including DNA tweezers, motors, walkers, and robots. DNA nanomachines have become prevalent for signal amplification and transformation in the field of biosensing, providing a new method for constructing highly sensitive sensing analysis strategies. DNA tweezers have exhibited unique advantages in biosensing applications owing to their simple structures and fast responses. The two-state conformation of DNA tweezers, the open and closed states, enable them to open and close autonomously after stimulation, thus facilitating the quick detection of corresponding signal changes of different targets. This review discusses the recent progress in the application of DNA nanotweezers in the field of biosensing, and the trends in their development for application in the field of biosensing are summarized.

Modular DNA Tetrahedron Nanomachine-Guided Dual-Responsive Hybridization Chain Reactions for Discernible Bivariate Assay and Cell Imaging

Engineering of multivariate biosensing and imaging platforms involved in disease plays a vital role in effectively discerning cancer cells from normal cells and facilitating reliable targeted therapy. Multiple biomarkers such as mucin 1 (MUC1) and nucleolin are typically overexpressed in breast cancer cells compared to normal human breast epithelium cells. Motivated by this knowledge, a dual-responsive DNA tetrahedron nanomachine (drDT-NM) is constructed through immobilizing two recognition modules, MUC1 aptamer (MA) and a hairpin H1* encoding nucleolin-specific G-rich AS1411 aptamer, in two separate vertexes of a functional DT architecture tethering two localized pendants (P^M and P^N). When drDT-NM identifiably binds bivariate MUC1 and nucleolin, two independent hybridization chain reactions (HCR^M and HCR^N) as amplification modules are initiated with two sets of four functional hairpin reactants. Among them, one hairpin for HCR^M is dually ended by fluorescein and quencher BHQ1 to sense MUC1. The responsiveness of nucleolin is executed by operating HCR^N utilizing another two hairpins programmed with two pairs of AS1411 splits. In the shared HCR^N duplex products, the parent AS1411 aptamers are cooperatively merged and folded into G-quadruplex concatemers to embed Zn-protoporphyrin IX (ZnPPIX/G4) for fluorescence signaling readout, thereby achieving a highly sensitive intracellular assay and discernible cell imaging. The tandem ZnPPIX/G4 unities also act as imaging agents and therapeutic cargos for efficient photodynamic therapy of cancer cells. Based on drDT-NM to guide bispecific HCR amplifiers for adaptive bivariate detection, we present a paradigm of exquisitely integrating modular DNA nanostructures with nonenzymatic nucleic acid amplification, thus creating a versatile biosensing platform as a promising candidate for accurate assay, discernible cell imaging, and targeted therapy.

A multi-channel responsive AuNP@COF core-shell nanoprobe for simultaneous subcellular profiling of multiple cancer biomarkers

The abnormal change in the expression profile of multiple cancer biomarkers is closely related to tumor progression and therapeutic effect. Due to their low abundance in living cells and the limitations of existing imaging techniques, simultaneous imaging of multiple cancer biomarkers has remained a significant challenge. Here, we proposed a multi-modal imaging strategy to detect the correlated expression of multiple cancer biomarkers, MUC1, microRNA-21 (miRNA-21) and reactive oxygen (ROS) in living cells, based on a porous covalent organic framework (COF) wrapped gold nanoparticles (AuNPs) core-shell nanoprobe. The nanoprobe is functionalized with Cy5-labeled MUC1 aptamer, a ROS-responsive molecule (2-MHQ), and a miRNA-21-response hairpin DNA tagged by FITC as the reporters for different biomarkers. The target-specific recognition can induce the orthogonal molecular change of these reporters, producing fluorescence and Raman signals for imaging the expression profiles of membrane MUC1 (red fluorescence channel), intracellular miRNA-21 (green fluorescence channel), and intracellular ROS (SERS channel). We further demonstrate the capability of the cooperative expression of these biomarkers, along with the activation of NF-κB pathway. Our research provides a robust platform for imaging multiple cancer biomarkers, with broad potential applications in cancer clinical diagnosis and drug discovery.

Multiplexed smFRET Nucleic Acid Sensing Using DNA Nanotweezers

The multiplexed detection of disease biomarkers is part of an ongoing effort toward improving the quality of diagnostic testing, reducing the cost of analysis, and accelerating the treatment processes. Although significant efforts have been made to develop more sensitive and rapid multiplexed screening methods, such as microarrays and electrochemical sensors, their limitations include their intricate sensing designs and semi-quantitative detection capabilities. Alternatively, fluorescence resonance energy transfer (FRET)-based single-molecule counting offers great potential for both the sensitive and quantitative detection of various biomarkers. However, current FRET-based multiplexed sensing typically requires the use of multiple excitation sources and/or FRET pairs, which complicates labeling schemes and the post-analysis of data. We present a nanotweezer (NT)-based sensing strategy that employs a single FRET pair and is capable of detecting multiple targets. Using DNA mimics of miRNA biomarkers specific to triple-negative breast cancer (TNBC), we demonstrated that the developed sensors are sensitive down to the low picomolar range (≤10 pM) and can discriminate between targets with a single-base mismatch. These simple hybridization-based sensors hold great promise for the sensitive detection of a wider spectrum of nucleic acid biomarkers.

Electrochemiluminescence Cascade Amplification Platform for Detection of Dual-microRNA and Operation of Concatenated Logic Circuit

The detection of multiple biomarkers is of great significance to the accurate diagnosis of diseases. Herein, in this work, we constructed an electrochemiluminescence (ECL) cascade amplification platform for dual acute myocardial infarction (AMI)-related microRNA detection. The Zn²⁺-dependent DNAzyme digestion reaction initiated by miR-133a and the duplex-specific nuclease (DSN) cleavage circuit initiated by miR-499 were carried out independently to form a fuel hairpin DNA and active initiator strand, respectively, to trigger a hybridization chain reaction, which constituted a two-input-regulated "AND" logic circuit based on single ECL signal output. The use of single signal probe (Ru(bpy)₃²⁺) avoided the time-consuming and costly process of multiple signal molecule labeling or modification. The independent operation of the DNAzyme digestion reaction and DSN-assisted target recycling improved the detection efficiency of the system. In addition, the detection of each miRNA had undergone a cascade amplification process, which improved the detection sensitivity for each target. Furthermore, benefitting from the strong complexation of EDTA with Zn²⁺ and the flexible design of DNA sequences, the two-input "AND" logic gate was extended to a four-input "INHIBIT-AND-INHIBIT" concatenated logic circuit, which broadens the application of the ECL method in logic gates. We anticipate that this cascading amplification strategy can be widely applied in accurate diagnosis of AMI and the construction of ECL-based logic devices.

Mass Spectrometric Multiplex Detection of MicroRNA and Protein Biomarkers for Liver Cancer

The occurrence of cancers is often accompanied by the abnormal expression of several sorts of biomarkers (e.g., nucleic acids and proteins). The multiplex assessment of them would substantially aid in the early detection and precise diagnosis, which is often hampered by their different detection schemes, different reaction matrix and reagents, and spectral overlapping. Herein, we propose a simple and sensitive mass spectrometric method for the multiplex detection of nucleic acid and protein, in which liver cancer-related biomarkers miRNA 223 and alpha-fetoprotein (AFP) were selected as model analytes. The self-amplification effect of metal atom-based nanoparticle probes can provide high sensitivity in complex serum samples without any additional amplification procedure. The detection limits for the simultaneous detection of miRNA 223 and AFP were 103 (2.1 pM) and 219 amol (0.15 ng/mL), respectively, with high specificity and selectivity. The proposed method is potentially useful for the rapid screening of cancers.

Universal and Flexible Signal Transduction Module Based on Overload Triggering Probe Escape for Sensitive Detection of Tau Protein

Aptamer-based methods have attracted increasing interest due to flexible engineering, but their generality is limited by the heterogeneity of signal transduction mechanisms. Given the fact that nonlinear and large molecules are more likely to make the nanosurface overloaded, we investigated a novel signal transduction process to extend the application of aptasensors. In this work, an aptamer complementary element (ACE) is designed with a primer region to serve as the signal probe, which can fully hybridize with an aptamer and be separated by magnetic beads (MBs). Upon target binding, the formed aptamer/target complex is much larger than the linear aptamer/ACE-primer dimer, causing overload of MBs on account of steric hindrance. An extra aptamer/ACE-primer can escape from the surface to the supernatant, which can be amplified by a catalytic hairpin assembly (CHA) circle. The size-dependent signal transduction and the modular design endow the method with high generality and flexibility for protein analysis. The proposed aptasensor was successfully applied to the detection of tau proteins ranging from 0.5 to 1000 ng mL^-1 with a limit of detection (LOD) as low as 0.254 ng mL^-1. The recovery tests in both human serum and cerebra spinal fluid confirmed the high accuracy and stability. Furthermore, a successful distinction was made between AD patients and healthy controls by the method, suggesting the possible applicability for practical analysis of tau proteins.

Ratiometric Fluorescence Detection of Colorectal Cancer-Associated Exosomal miR-92a-3p with DSN-Assisted Signal Amplification by a MWCNTs@Au NCs Nanoplatform

The detection of miRNA shows great promise in disease diagnosis. In this work, a ratiometric fluorescent biosensor based on multi-walled carbon nanotubes@gold nanoclusters (MWCNTs@Au NCs) and duplex-specific nuclease (DSN)-assisted signal amplification was fabricated for miRNA detection. Colorectal cancer (CRC)-associated miR-92a-3p extracted from exosomes was selected as the target. MWCNTs@Au NCs performs the dual functions of fluorescence quencher and internal fluorescence reference. In the absence of miR-92a-3p, an Atto-425-modified single-stranded DNA probe is adsorbed on MWCNTs@Au NCs, resulting in the quenching of Atto-425. In the presence of miR-92a-3p, the duplex is formed by hybridization of the probe and miR-92a-3p and leaves the MWCNTs@Au NCs, resulting in the fluorescence recovery of Atto-425. DSN can cleave the probe and result in the release of miR-92a-3p. The released miR-92a-3p can hybridize with other probes to form a signal amplification cycle. The fluorescence of MWCNTs@Au NCs remains stable and constitutes a ratiometric fluorescence system with that of Atto-425. A detection concentration interval of 0.1–10 pM and a limit of detection of 31 fM was obtained under optimized measurement conditions. In addition, the accuracy of the biosensor was validated by detecting the concentration of miR-92a-3p extracted from clinical exosome samples.

Dynamic 3D DNA Rolling Walkers via Directional Movement on a Lipid Bilayer Supported by Au@Fe3O4 Nanoparticles for Sensitive Detection of MiRNA-16

Currently reported polyfluorene-based fluorescence detection usually shows high background signal and low detection sensitivity. This work developed a novel three-dimensional (3D) DNA rolling walker via directional movement on a lipid bilayer (LB) supported by Au@Fe₃O₄ nanoparticles (NPs) in a polyfluorene-based fluorescence system so that it could achieve significantly improved detection sensitivity and almost zero-background signal detection for miRNA-16. First, the carboxyl-functionalized poly[(9,9-dioctylfluorenyl-2,7-diyl)-co-(1,4-benzo-{2,1',3}-thiadazole)] polymer nanoparticles (c-PFBT PNPs) covalently bonded with amino-labeled single-strand CP and further hybridized with single-strand AP to prepare AP-CP-coupled c-PFBT PNP probes. Meanwhile, Au@Fe₃O₄ NPs were developed as efficient fluorescence quenchers and served as the matrix for assembling the LB. The resulting Au@Fe₃O₄@LB assembled cholesterol-labeled orbital DNA L1 and L2 and further assembled hairpins H1 and AP-CP-coupled c-PFBT PNP probes to construct DNA nanomachines. Then, the target miRNA-16 was introduced to initiate the rolling circle amplification (RCA) reaction and form dynamic DNA rolling walkers, thus releasing single-strand CP-coupled c-PFBT PNP probes. The magnetic separation effect of Au@Fe₃O₄ NPs made it possible to detect the fluorescence signal from the released probes, thus achieving almost zero-background signal detection for miRNA-16 with a low detection limit of 95 aM. The flexible interfaces provided by the LB endowed the DNA rolling walkers with high binding efficiency and low derailment probability, thus achieving significantly improved detection sensitivity. The developed strategy provided an attractive polyfluorene-based fluorescence platform with high-sensitivity and low-background signals.

Construction of Molecular Transporter Based on DNA Structure Regulation

This study aims to build a molecular transporter machine that is based on the microstructure regulation of DNA triplets, which can automatically search, load, target delivery, and unload target protein molecules. The design of the molecular transporter includes: (1) a DNA triplet, which can recognize and load of the target protein; (2) a similar DNA triplet realizing the target transport; and (3) the signal-indicating DNA, which is connected at the target destination to achieve fixation of the target protein at the target destination. The molecular transporter machine would provide research practice and theoretical guidance for the development of DNA-based molecular machines.

Target Deoxyribonucleic Acid-Recycled Lighting-Up Amplifiable Ratiometric Fluorescence Biosensing of Bicolor Silver Nanoclusters Hosted in a Switchable Deoxyribonucleic Acid Construct

Ratiometric assays of label-free dual-signaling reporters with enzyme-free amplification are intriguing yet challenging. Herein, yellow- and red-silver nanocluster (yH-AgNC and rH-AgNC) acting as bicolor ratiometric emitters are guided to site-specifically cluster in two template signaling hairpins (yH and rH), respectively, and originally, both of them are almost non-fluorescent. The predesigned complement tethered in yH is recognizable to a DNA trigger (T_OC) related to SARS-CoV-2. With the help of an enhancer strand (G₁₅E) tethering G-rich bases (G₁₅) and a linker strand (LS), a switchable DNA construct is assembled via their complementary hybridizing with yH and rH, in which the harbored yH-AgNC close to G₁₅ is lighted-up. Upon introducing T_OC, its affinity ligating with yH is further implemented to unfold rH and induce the DNA construct switching into closed conformation, causing T_OC-repeatable recycling amplification through competitive strand displacement. Consequently, the harbored rH-AgNC is also placed adjacent to G₁₅ for turning on its red fluorescence, while the yH-AgNC is retainable. As demonstrated, the intensity ratio dependent on varying T_OC is reliable with high sensitivity down to 0.27 pM. By lighting-up dual-cluster emitters using one G₁₅ enhancer, it would be promising to exploit a simpler ratiometric biosensing format for bioassays or clinical theranostics.

Upconversion Luminescence-Initiated and GSH-Responsive Self-Driven DNA Motor for Automatic Operation in Living Cells and In Vivo

In light of the worthy design flexibility and the good signal amplification capacity, the recently developed DNA motor (especially the DNA walker)-based fluorescent biosensors can offer an admirable choice for realizing bioimaging. However, this attractive biosensing strategy not only has the disadvantage of uncontrollable initiation but also usually demands the supplement of exogenous driving forces. To handle the above obstacles, some rewarding solutions are proposed here. First, on the surface of an 808 nm near-infrared light-excited low-heat upconversion nanoparticle, a special ultraviolet upconversion luminescence-initiated three-dimensional (3D) walking behavior is performed by embedding a photocleavage linker into the sensing elements, and such light-controlled target recognition can perfectly overcome the pre-triggering of the biosensor during the biological delivery to significantly boost the sensing precision. After that, a peculiar self-driven walking pattern is constructed by employing MnO₂ nanosheets as an additional nanovector to physically absorb the sensing frame, for which the reduction of the widespread glutathione in the biological medium can bring about sufficient self-supplied Mn²⁺ to guarantee the walking efficiency. By selecting an underlying next-generation broad-spectrum cancer biomarker (survivin messenger RNA) as the model target, we obtain that the newly formed autonomous 3D DNA motor shows a commendable sensitivity (where the limit of detection is down to 0.51 pM) and even an outstanding specificity for distinguishing single-base mismatching. Beyond this sound assay performance, our sensing approach is capable of working as a powerful imaging platform for accurately operating in various living specimens such as cells and bodies, showing a favorable diagnostic ability for cancer care.

Engineered G-Quadruplex-Embedded Self-Quenching Probes Regulate Single Probe-Based Multiplex Isothermal Amplification to Light Road Lamp Probes for Sensitized Determination of microRNAs

Design of oligonucleotide probe-based isothermal amplification with the ability to identify miRNA biomarkers is crucial for molecular diagnostics. In this work, we engineered a miRNA-21-responsive G-quadruplex-embedded self-quenching probe (GE-SQP) that can regulate single probe-based multiplex amplifications. The free GE-SQP is tightly locked in a quenching state with no active G-quadruplexes. Introduction of target miRNA to hybridize with GE-SQP would induce a multiplex isothermal amplification to significantly build a lot of one-bulb-contained road lamp probe (OC-RLP) and two-bulb-contained road lamp probe (TC-RLP) using G-quadruplex as the lamp bulb. When lightened by thioflavin T (ThT), beams of fluorescence were emitted to show the presented miRNA-21. Specially, the whole amplification is only a one probe-involved one-step reaction without any wasted species. The mix-to-detection and all-in amplification behavior allows the sensing system a maximally maintained operation simplicity and high assay performance. In such a way, the detection range of miRNA-21 is from 1 fM to 1 nM with a limit of detection of 0.86 fM. The practicability was demonstrated by determining miRNA-21 from serum samples with acceptable results. We expect that this method can open a new avenue for exploring advanced biosensors with improved analytical performances.

DNA Nanotweezers for Biosensing Applications: Recent Advances and Future Prospects

DNA nanotweezers (DTs) are reversible DNA nanodevices that can optionally switch between opened and closed states. Due to their excellent flexibility and high programmability, they have been recognized as a promising platform for constructing a diversity of biosensors and logic gates, as well as a versatile tool for molecular biology studies. In this review, we provide an overview of biosensing applications using DTs. First, the design and working principle of DTs are introduced. Next, the signal producing principles of DTs are summarized. Furthermore, biosensing applications of DTs for varying targets and purposes, both in buffers and complex biological environments, are highlighted. Finally, we provide potential opportunities and challenges for the further development of DTs.

A target-initiated autocatalytic 3D DNA nanomachine for high-efficiency amplified detection of MicroRNA

Considering the challenges of generating simple and efficient DNA (deoxyribonucleic acid) nanomachines for sensitive bioassays and the great potential of target-induced self-cycling catalytic systems, herein, a novel autocatalytic three-dimensional (3D) DNA nanomachine was constructed based on cross-catalytic hairpin assembly on gold nanoparticles (AuNPs) to generate self-powered efficient cyclic amplification. Typically, the DNA hairpins H1, H2, H3 and H4 were immobilized onto AuNPs first. In the presence of target microRNA-203a, the 3D DNA nanomachines were triggered to activate a series of CHA (catalytic hairpin assembly) reactions. Based on the rational design of the system, the products of the CHA 1 reaction were the trigger of the CHA 2 reaction, which could trigger the CHA 1 reaction in turn, generating an efficient self-powered CHA amplification strategy without adding fuel DNA strands or protein enzymes externally and producing high-efficiency fluorescence signal amplification. More importantly, the proposed autocatalytic 3D DNA nanomachines outperformed conventional 3D DNA nanomachines combined with the single-directional cyclic amplification strategy to maximize the amplification efficiency. This strategy not only achieves high-efficiency analysis of microRNAs (microribonucleic acids) in vitro and intracellularly but also provides a new pathway for highly processive DNA nanomachines, offering a new avenue for bioanalysis and early clinical diagnosis.

A DNA–Au nanomachine activated by dual types of biomarkers for multi-site imaging and gene silencing

A programmed DNA–Au nanomachine was constructed to achieve in situ imaging of the transmembrane glycoprotein MUC1 and cytoplasmic miRNA-21 and trigger precise gene silencing therapy for breast cancer.

Advances in the DNA Nanotechnology for the Cancer Biomarkers Analysis: Attributes and Applications

The most commonly used clinical methods are enzyme-linked immunosorbent assay (ELISA) and quantitative PCR (qPCR) in which ELISA was applied for the detection of protein biomarkers and qPCR was especially applied for nucleic acid biomarker analysis. Although these constructed methods have been applied in wide range, they also showed some inherent shortcomings such as low sensitivity, large sample volume and complex operations. At present, many methods have been successfully constructed on the basis of DNA nanotechnology with the merits of high accuracy, rapid and simple operation for cancer biomarkers assay. In this review, we summarized the bioassay strategies based on DNA nanotechnology from the perspective of the analytical attributes for the first time and discussed and the feasibility of the reported strategies for clinical application in the future.

Asymmetric patterning drives the folding of a tripodal DNA nanotweezer

DNA tweezers have emerged as powerful devices for a wide range of biochemical and sensing applications; however, most DNA tweezers consist of single units activated by DNA recognition, limiting their range of motion and ability to respond to complex stimuli. Herein, we present an extended, tripodal DNA nanotweezer with a small molecule junction. Simultaneous, asymmetric elongation of our molecular core is achieved using polymerase chain reaction (PCR) to produce length- and sequence-specific DNA arms with repeating DNA regions. When rigidified, our DNA tweezer can be addressed with streptavidin-binding ligands. Full control over the number, separation, and location of these ligands enables site-specific streptavidin recognition; all three arms of the DNA nanotweezer wrap around multiple streptavidin units simultaneously. Our approach combines the simplicity of DNA tile arrays with the size regime normally provided by DNA origami, offering an integrated platform for the use of branched DNA scaffolds as structural building blocks, protein sensors, and dynamic, stimuli-responsive materials.

Universal Nanoparticle Counting Platform for Tetraplexed Biomarkers by Integrating Immunorecognition and Nucleic Acid Hybridization in One Assay

The development of a simple and universal strategy for simultaneous quantification of proteins and nucleic acid biomarkers in one assay is valuable, particularly for disease diagnosis and pathogenesis studies. Herein, a universal and amplification-free quantum dot-doped nanoparticle counting platform was developed by integrating immunorecognition and nucleic acid hybridization in one assay. The assay can be performed at room temperature, which is friendly for routine analysis. Multiplexed biomarkers associated with Alzheimer's disease (AD) including proteins and nucleic acids were detected. For simultaneous detection of tetraplex biomarkers, the assay for amyloid β 1-42 (Aβ42), tau protein, miR-146a, and miR-138 presented limit of detection values of 250 pg/mL, 55.7 pg/mL, 52.5 pM, and 0.62 pM, respectively. By spiking all the above four biomarkers in one artificial cerebrospinal fluid sample, the recoveries were found to be 94.7-117.2%. Using tau protein as the model, four measurements in 88 days presented a coefficient of variance of 7.5%. The proposed platform for the multiplexed assay of proteins and nucleic acids presents the universality, reasonable sensitivity, and repeatability, which may open a new door for early diagnosis and pathogenesis research for AD and other diseases.

Sequence Does Not Matter: The Biomedical Applications of DNA-Based Coatings and Cores

Biomedical applications of DNA are diverse but are usually associated with specific recognition of target nucleotide sequences or proteins and with gene delivery for therapeutic or biotechnological purposes. However, other aspects of DNA functionalities, like its nontoxicity, biodegradability, polyelectrolyte nature, stability, thermo-responsivity and charge transfer ability that are rather independent of its sequence, have recently become highly appreciated in material science and biomedicine. Whereas the latest achievements in structural DNA nanotechnology associated with DNA sequence recognition and Watson–Crick base pairing between complementary nucleotides are regularly reviewed, the recent uses of DNA as a raw material in biomedicine have not been summarized. This review paper describes the main biomedical applications of DNA that do not involve any synthesis or extraction of oligo- or polynucleotides with specified sequences. These sequence-independent applications currently include some types of drug delivery systems, biocompatible coatings, fire retardant and antimicrobial coatings and biosensors. The reinforcement of DNA properties by DNA complexation with nanoparticles is also described as a field of further research.

Antibody-Responsive Ratiometric Fluorescence Biosensing of Biemissive Silver Nanoclusters Wrapped in Switchable DNA Tweezers

Exploring the ratiometric fluorescence biosensing of DNA-templated biemissive silver nanoclusters (AgNCs) is significant in bioanalysis, yet the design of a stimuli-responsive DNA device is a challenge. Herein, using the anti-digoxin antibody (anti-Dig) with two identical binding sites as a model, a tweezer-like DNA architecture is assembled to populate fluorescent green- and red-AgNCs (g-AgNCs and r-AgNCs), aiming to produce a ratio signal via specific recognition of anti-Dig with two haptens (DigH). To this end, four DNA probes are programmed, including a reporter strand (RS) dually ended with a g-/r-AgNC template sequence, an enhancer strand (ES) tethering two same G-rich tails (G18), a capture strand (CS) labeled with DigH at two ends, and a help strand (HS). Initially, both g-AgNCs and r-AgNCs wrapped in the intact RS are nonfluorescent, whereas the base pairing between RS, ES, CS, and HS resulted in the construction of DNA mechanical tweezers with two symmetric arms hinged by a rigid "fulcrum", in which g-AgNCs are lighted up due to G18 proximity ("green-on"), and r-AgNCs away from G18 are still dark ("red-off"). When two DigHs in proximity recognize and bind anti-Dig, the conformation switch of these tweezers resultantly occurs, taking g-AgNCs away from G18 for "green-off" and bringing r-AgNCs close to G18 for "red-on". As such, the ratiometric fluorescence of r-AgNCs versus g-AgNCs is generated in response to anti-Dig, achieving reliable quantization with a limit of detection at the picomolar level. Based on the fast stimulated switch of unique DNA tweezers, our ratiometric strategy of dual-emitting AgNCs would provide a new avenue for a variety of bioassays.

Photoelectrochemical Biosensor for MicroRNA-21 Based on High Photocurrent of TiO2/Two-Dimensional Coordination Polymer CuClx(MBA)y Photoelectrode

Conventional photosensitive materials such as TiO₂ suffer from restricted absorption in the ultraviolet region, fast recombination of photogenerated electron-hole pairs, and a lack of functional groups for biocoupling, which hinder their application in photoelectrochemical (PEC) biosensing. Herein, a new coordination polymer (CP) based on Cu(I), chloridion, and 4-mercaptobenzoic acid (MBA) has been designed and synthesized (called CuCl_x(MBA)_y). The prepared p-type CuCl_x(MBA)_y exhibits visible-light absorption due to its narrow optical band gap (2.59 eV), and its proper band edge position enables it to form a p-n junction with TiO₂. Through layer-by-layer assembling, the photocurrent intensity of the CuCl_x(MBA)_y/TiO₂/FTO composite photoelectrode was 3.7-fold higher than that of a TiO₂/FTO electrode and 35-fold higher than a CuCl_x(MBA)_y/FTO electrode. The potential enhancement mechanism was discussed, which lies in the contributions of CuCl_x(MBA)_y in enhancing absorption in the visible-light region and boosting the separation of electron-hole pairs of TiO₂ by the p-n junction. Furthermore, CuCl_x(MBA)_y nanosheets can realize bioconjugation directly, thanks to its abundant carboxyl groups. The CuCl_x(MBA)_y/TiO₂/FTO composite photoelectrodes were applied to develop a sensitive PEC biosensor for microRNA-21 (model target). By subtly exploiting the energy transfer between CuCl_x(MBA)_y and Au nanoparticles (AuNPs), AuNPs served as effective quenchers. In the presence of the target, AuNP-labeled sDNA1 connected to the electrode surface, and thus, a decreased photocurrent was obtained. The proposed biosensor has a low detection limit of 0.29 fM (S/N = 3), good selectivity, and reproducibility. The proposed system was applied to monitor microRNA in cancer cells with satisfying results.

Light-Activated and Self-Driven Autonomous DNA Nanomachine Enabling Fluorescence Imaging of MicroRNA in Living Cells with Exceptional Precision and Efficiency

Owing to their favorable design flexibility and eminent signal amplification ability, DNA nanomachine-supported biosensors have provided an attractive avenue for intracellular fluorescence imaging, especially for DNA walkers. However, this promising option not only suffers from poor controllability but also needs to be supplied with additional driving forces on account of the frequent employment of metal ion-dependent DNAzymes. Aiming at overcoming these obstacles, we introduce some fruitful solutions. On one hand, innovative light-activated walking behavior induced by a photocleavage mode is established on the surfaces of gold nanoparticles, and such a photoselective sensing system can be perfectly prevented from pre-activating during the intracellular delivery process and made to achieve target identification only under irradiation using a moderate ultraviolet light source. On the other hand, this light-switchable sensing frame is encapsulated within a dissociable metal-organic framework (ZIF-8) to facilitate endocytosis and ensure sufficient internal cofactors (Zn²⁺) to realize a self-driven pattern in the acidic environment of the cell lysosome. Based on the abovementioned efforts, the newly constructed autonomous three-dimensional DNA walkers present satisfactory sensitivity (a limit of detection of down to 19.4 pM) and specificity (even distinguishing single-base changes) toward a model biomarker (microRNA-21). More importantly, the sensing method allows determination of the variations in targets in living cancer cells with exceptional precision and efficiency, offering a powerful assay platform for intracellular imaging.

A Dual Functional Self-Enhanced Electrochemiluminescent Nanohybrid for Label-Free MicroRNA Detection

The development of electrochemiluminescent (ECL) emitters with both intense ECL and excellent film-forming properties is highly desirable for biosensing applications. Herein, a facile one-pot preparation strategy was proposed for the synthesis of a self-enhanced ECL emitter by co-doping Ru(bpy)₃²⁺ and (diethylaminomethyl)triethoxysilane (DEAMTES) into an in situ-produced silica nanohybrid (DEAMTES@RuSiO₂). DEAMTES@RuSiO₂ not only possessed improved ECL properties but also exhibited outstanding film-forming ability, which are both critical for the construction of ECL biosensors. By coupling branched catalytic hairpin assembly with efficient signal amplification peculiarity, a label-free ECL biosensor was further constructed for the convenient and highly sensitive detection of miRNA-21. The as-fabricated ECL biosensor displayed a detection limit of 8.19 fM, much lower than those in previous reports for miRNA-21 and showed superior reliability for detecting miRNA-21-spiked human serum sample, demonstrating its potential for applications in miRNA-associated fundamental research and clinical diagnosis.

Photo-gated and self-powered three-dimensional DNA motors with boosted biostability for exceptionally precise and efficient tracing of intracellular survivin mRNA

Benefiting from the outstanding signal amplification effect and the admirable construction flexibility, the currently proposed DNA motors (particularly DNA walkers) based biosensing concepts have provided a forceful fluorescence imaging tool for intracellular detection. Even so, this promising sensing means is not only subject to poor controllability and prone to produce false signals but also requires exogenous powering forces owing to the common employment of DNAzyme. In response to these challenges, we are herein motivated to present some meaningful solving strategies. For one thing, the surfaces of gold nanoparticles are conducted with a photo-gated walking behavior by introducing a photocleave mode, under which the light-switchable DNA walkers are capable of being selectively activated via an external ultraviolet source to faultlessly prevent the sensing frame from being pre-initiated during cellular uptake and intracellular delivery. For another, the intracellular biothiols are consumed by MnO₂ nanosheets to effectively avoid the competitions to Au-S bonds to eliminate potential false outputs and also self-supply sufficient cofactors (Mn²⁺) to actualize a self-powered operation pattern as well as facilitate the endocytosis process. Following these breakthroughs, a favorable analysis performance towards a model tumor biomarker (survivin mRNA) is endowed with the newly raised biosensor, whose sensitivity is low to pM level with a sound specificity for identifying single base mismatching. Moreover, the significantly improved autonomous three-dimensional DNA walkers can be used to determine and dynamically trace the targets in live cancer cells with an exceptional precise and efficient manner, commendably impelling the sensing ability of DNA motors in biological specimens.

DNA branch migration amplification cascades for enzyme-free and non-label aptamer sensing of mucin 1

The sensitive and quantitative analysis of mucin 1 (MUC1) is very important for the prevention and early diagnosis of cancers. In the present work, based on the mechanism of the four-way DNA branch migration cascades, we constructed a simple and effective signal amplification strategy for aptamer-based sensitive detection of MUC1. The specific binding of MUC1 to the aptamer sequence in the hairpin probe unfolds and switches its structure, triggering the formation of the DNA Holliday junction structure for cascaded branch migrations with the assistance of two fuel DNA duplexes. Importantly, a target analogue DNA complex can be generated in such processes for recycling the branch migration reactions for the production of substantial amounts of G-quadruplexes, which can bind the thioflavin T dye to show significantly intensified fluorescence for detecting MUC1 with a low detection limit of 2.8 nM without the involvement of any labels or enzymes. In addition, this detection strategy could be successfully applied to monitor the target MUC1 in diluted human serums with a high selectivity and acceptable accuracy to demonstrate its potential application for real samples with the advantages of simplicity and signal amplification capability.

Investigating the effect of 6-mercaptohexanol on the performance of a biosensor based on nanosurface energy transfer between gold nanoparticles and quantum dots

Nanosurface energy transfer (NSET)-based sensors have been widely developed using various pairs of nanomaterials including gold nanoparticles (AuNPs) and quantum dots (QDs). However, a low signal to background ratio is one of the most important problems that researchers are continually trying to solve. Herein, we present a 6-mercaptohexanol (MCH) modified MCH/DNA-Au-QD sensor for the detection of nucleic acids and MUC1. Interestingly, an unexpected effect of MCH was found in enhancing the fluorescence recovery ratio, therefore yielding a higher signal to background ratio. Through further investigation, we perceive the enhancement as a result of lowering of the NSET efficiency between free DNA-AuNPs and free DNA-QDs, which arises from the stretching of adsorbed DNA on the surface of AuNPs. The employment of MCH endowed the sensor with a wider linear range from 5 nM to 120 nM and a relatively lower LOD of 1.19 nM in nucleic acid detection, outperforming the original DNA-Au-QD sensor. Furthermore, the application of the sensor can be further extended to MUC1 detection. This study offers a better understanding of the NSET process between QDs and AuNPs and also initiates a new approach for the performance optimization of analogous NSET-based sensors.

Interaction between the functionalized probes: The depressed efficiency of dual-amplification strategy on ratiometric electrochemical aptasensor for aflatoxin B1

Signal amplification is one of the most effective ways to develop the high-performance electrochemical sensors. However, it can be more complicated for ratiometric detections. Herein, a ratiometric electrochemical aptasensor for aflatoxin B1 (AFB1) was proposed by taking advantage of a dual-amplification strategy by coupling of DNA walker (DW) with hybridization chain reaction (HCR). The special binding of AFB1 with ferrocene (Fc)-labelled aptamer triggers DW on hairpin DNA (hDNA) tracks to produce abundant double-stranded DNA (dsDNA). HCR-based strand amplification occurs on these dsDNA to absorb more methylene blue (MB). Then current ratio of MB (I_MB) and Fc (I_Fc) is designed as a yardstick to detect AFB1. Our experiments reveal that the interaction between Fc and MB (i.e., steric hindrance, electron mediator) varies. In addition to steric hindrance, the presence of MB also acts as electron mediator, thereby facilitating the electron transfer between Fc and electrode. Such combined effect consequently depresses the efficiency of dual-amplification strategy to improve the detection. The developed ratiometric electrochemical aptasensor allows the accurate detection of AFB1 in the 0.003-3 pg mL^-1 range. Our work has shed light on the amplification strategy for ratiometric sensing, and provided a new route in integrating different amplification strategies.

Guanine-Lighting-Up Fluorescence Biosensing of Silver Nanoclusters Populated in Functional DNA Constructs by a pH-Triggered Switch

Dark or weak-emissive DNA-harbored silver nanoclusters (AgNCs) can be remarkably lighted up when approaching to guanine bases. The resultant bright AgNCs acting as a fluorescent reporter are fascinating in biosensing. To explore the applicable guanine-enhanced emission of AgNCs for biosensing microRNA-155 (miR-155) as a model, here we designed a unique stem-loop hairpin beacon (HB) encoding with an miR-155-recognizable sequence and a AgNCs-nucleable template, as well as a hairpin helper tethering a partially locked guanine-rich (15-nt) tail (G₁₅H), while two identical cytosine-rich segments were inserted in HB and G₁₅H to merge for folding/unfolding of i-motif at changed pHs. Initially, the intact clusters populated in HB (HB/AgNCs) were almost nonfluorescent in a buffer (pH 7.0). Then, miR-155 was introduced to trigger a repeated hairpin assembly of HB and G₁₅H by competitive strand displacement reactions at decreased pH 5.0 within 10 min, consequently generating numerous duplex DNA constructs (DDCs). With the resultant template of pH-responsive i-motifs incorporated in DDCs, their folding at pH 5.0 brought the proximity of unlocked G₁₅ overhang to the clusters in a crowded environment, remarkably lighting up the red-emitting fluorescence of HB/AgNCs (λ_em = 628 ± 5 nm) for amplified signal readout. About 3.5-fold enhancement of quantum yield was achievable using different variants of i-motif length and G₁₅ position. Simply by adding OH^-, the configuration fluctuation of i-motifs was implemented for switchable fluorescence biosensing to variable miR-155. Based on a one-step amplification and signaling scheme, this subtle strategy was rapid, low-cost, and specific for miR-155 with high sensitivity down to 67 pM.

Simultaneous detection of aflatoxin B1 and ochratoxin A in food samples by dual DNA tweezers nanomachine

a dual DNA tweezers nanomachine was developed for one-step simultaneous detection of aflatoxin B1 (AFB1) and ochratoxin A (OTA) in food samples. The dual DNA tweezers are locked by the aptamers of mycotoxins, resulting the "turn off" of fluorescent signal. In the presence of AFB1 and OTA, the aptamers can bind with their corresponding targets, resulting the "open" of DNA tweezers and the "turn on" of the fluorescent signals. The limits of detections were 3.5 × 10^-2 ppb for AFB1 and 0.1 ppb for OTA. Moreover, the applicability of the method was further demonstrated by conducting a limited survey on 5 samples collected from various sources. The recoveries of this method change from 90.0% to 110.0% for simultaneous detection of AFB1 or OTA and the RSDs vary from 4.1% to 9.2%. Detection uncertainties were within 5% (with a 95% confidence level).

An orbitron-like 3D DNA clip-based nanomachine and its application for sensitive fluorescent bioassay of MicroRNA

Herein, an orbitron-like three-dimensional (3D) DNA clip-based nanomachine was proposed for ultrasensitive fluorescent bioassay of microRNA, which was constructed by mechanically interlocking double-DNA-ring with two single-stranded DNAs, performing an orbitron-like 3D structure with double freely rotated DNA rings as the open state. In the presence of target microRNA, the proposed orbitron-like 3D DNA clip can alter its structure from open to closed state in identification of the target microRNA, generating the closure between the previously modified fluorescent dyes and the quenchers to perform a "signal off" fluorescent signal correlated with the concentration of target microRNA. Compared with the normal DNA nanomachines, such as DNA tweezers constructed by self-assembly of three single-stranded DNAs which regulated the open and closed states on the basis of linear conformational changes, the proposed 3D DNA clip-based nanomachine with high mechanical rigidity realized the conformational changes in 3D space with the assistance of target microRNA, which could effectively increase the adjustable distance range and reduce the background signal. Furthermore, the 3D DNA clip-based nanomachine was applied in the fluorescent detection of microRNA-21 with favorable performances for the sensitive detection of microRNA in cells, providing a new avenue for early clinical diagnoses of disease.

A Green-Emission Metal-Organic Framework-Based Nanoprobe for Imaging Dual Tumor Biomarkers in Living Cells

The modular nature of metal-organic frameworks (MOFs) permits their tunable structure and function for target application, such as in biomedicine. Herein, a green-emission Zr(IV)-MOF (BUT-88) was constructed from a customized luminescent carbazolyl ligand. BUT-88 represents the first bcu-type MOF with both organic linker and metal node in eight connections and shows medium-sized pores, rich accessible linking sites, and good water stability and biocompatibility. In virtue of these merits, BUT-88 was then fabricated into a MOF-based fluorescent nanoprobe, drDNA-BUT-88. Using it, the live-cell imaging of dual tumor biomarkers was achieved for the first time upon a MOF-based probe, offering enhanced detection precision in early cancer diagnosis. Particularly, the probe showed efficient ratiometric fluorescent sensing toward the cytoplasmic biomarker microRNA-21, further improving the detection accuracy at the cellular level. In this work, the elaborate combination of MOF engineering and the fluorescent detection technique has contributed a facile biosensing platform, unlocking more possibilities of MOF chemistry.

Silver nanoclusters-based fluorescent biosensing strategy for determination of mucin 1: Combination of exonuclease I-assisted target recycling and graphene oxide-assisted hybridization chain reaction

A novel label-free fluorescent biosensing strategy was described for the sensitive detection of mucin 1 (MUC1). It consisted of an M-shaped aptamer probe for exonuclease I (Exo I)-assisted target recycling (EATR) amplification, and two AgNCs-hairpin probes for graphene oxide (GO)-assisted hybridization chain reaction (HCR) amplification. Based on the specificity of aptamer-target recognition, the addition of MUC1 caused a conformational change in the M-shaped aptamer probe, which was split into a MUC1-P3 complex and a P1-P2 duplex. Exo I then catalyzed the cleavage of aptamer sequence P3 from the MUC1-P3 complex and released the target MUC1. The released target MUC1 was free to bind with a new M-shaped probe to perform EATR amplification. Furthermore, the P1-P2 duplex with three single-stranded arms can act as a primer to initiate HCR between hairpin probes AgNCs-H1 and AgNCs-H2. In the process of HCR, two AgNCs-hairpins were autonomously cross-opened, generating long linear double-stranded nanowires containing large numbers of AgNCs. These nanowires cannot be quenched by GO due to the weak affinity between the long double-stranded DNA and GO, thereby retaining a strong fluorescent signal indicative of the concentration of MUC1. With these designs, in addition to an extremely low detection limit of 0.36 fg mL^-1, the method exhibited an acceptable linear response to detect MUC1 from 1 fg mL^-1 to 1 ng mL^-1. Additionally, this method could be exerted with a high degree of success to detect MUC1 in diluted human serum with satisfactory results.

Dynamic DNA Assemblies in Biomedical Applications

Deoxyribonucleic acid (DNA) has been widely used to construct homogeneous structures with increasing complexity for biological and biomedical applications due to their powerful functionalities. Especially, dynamic DNA assemblies (DDAs) have demonstrated the ability to simulate molecular motions and fluctuations in bionic systems. DDAs, including DNA robots, DNA probes, DNA nanochannels, DNA templates, etc., can perform structural transformations or predictable behaviors in response to corresponding stimuli and show potential in the fields of single molecule sensing, drug delivery, molecular assembly, etc. A wave of exploration of the principles in designing and usage of DDAs has occurred, however, knowledge on these concepts is still limited. Although some previous reviews have been reported, systematic and detailed reviews are rare. To achieve a better understanding of the mechanisms in DDAs, herein, the recent progress on the fundamental principles regarding DDAs and their applications are summarized. The relative assembly principles and computer-aided software for their designing are introduced. The advantages and disadvantages of each software are discussed. The motional mechanisms of the DDAs are classified into exogenous and endogenous stimuli-triggered responses. The special dynamic behaviors of DDAs in biomedical applications are also summarized. Moreover, the current challenges and future directions of DDAs are proposed.