Fabrication of Polymeric Ferrocene Nanoparticles for Electrochemical Aptasensing of Protein with Target-Catalyzed Hairpin Assembly

Multiplexed electrochemical nucleic acid sensor based on visible light-mediated metal-free thiol-yne click reaction for simultaneous detection of different nucleic acid targets

Simultaneous detection of multiple tumor biomarkers with a simple and low-cost assay is crucial for early cancer detection and diagnosis. Herein, we presented a low-cost and simple assay for multiplexed detection of tumor biomarkers using a spatially separated electrodes strategy. The sensor is fabricated based on a metal-free thiol-yne click reaction, which is mediated by visible light, on commercially available indium tin oxide (ITO) electrodes. Four biomarkers, including p53 DNA, Brca2 DNA, K-ras DNA, and MicroRNA-204 RNA, were used as model analytes, and the corresponding oligonucleotide probes were modified on the desired electrode units sequentially with 530 nm irradiation light in the presence of photosensitizer Eosin Y. By this visible light-mediated coupling reaction, oligonucleotide probe densities of up to 9.2 ± 0.7 × 1010 molecules/cm2 were readily obtained on the ITO electrode surface. The proposed multiplexed E-NA sensor could detect four different nucleic acid targets concurrently without crosstalk among adjacent electrodes and was also successfully applied for detecting targets in a 20% fetal calf serum sample. The detection limits for p53 DNA, Brca2 DNA, K-ras DNA, and MicroRNA-204 RNA were 0.72 nM, 0.97 nM, 2.15 nM, and 1.73 nM, respectively. The developed approach not only has a great potential for developing cost-effective biosensors on affordable substrates for nucleic acid target detection, but also be easily extended to detect other targets by modifying the specific oligonucleotide probes anchored on the electrode.

Advances and Challenges in Nanomaterial-Based Electrochemical Immunosensors for Small Cell Lung Cancer Biomarker Neuron-Specific Enolase

Early and rapid detection of neuron-specific enolase (NSE) is highly significant, as it is putative biomarker for small-cell lung cancer as well as COVID-19. Electrochemical techniques have attracted substantial attention for the early detection of cancer biomarkers due to the important properties of simplicity, high sensitivity, specificity, low cost, and point-of-care detection. This work reviews the clinically relevant labeled and label-free electrochemical immunosensors developed so far for the analysis of NSE. The prevailing role of nanostructured materials as electrode matrices is thoroughly discussed. Subsequently, the key performances of various immunoassays are critically evaluated in terms of limit of detection, linear ranges, and incubation time for clinical translation. Electrochemical techniques coupled with screen-printed electrodes developing market level commercialization of NSE sensors is also discussed. Finally, the review concludes with the current challenges associated with available methods and provides a future outlook toward commercialization opportunities for easy detection of NSE.

Aptamer-Protein Interactions: From Regulation to Biomolecular Detection

Serving as the basis of cell life, interactions between nucleic acids and proteins play essential roles in fundamental cellular processes. Aptamers are unique single-stranded oligonucleotides generated by in vitro evolution methods, possessing the ability to interact with proteins specifically. Altering the structure of aptamers will largely modulate their interactions with proteins and further affect related cellular behaviors. Recently, with the in-depth research of aptamer-protein interactions, the analytical assays based on their interactions have been widely developed and become a powerful tool for biomolecular detection. There are some insightful reviews on aptamers applied in protein detection, while few systematic discussions are from the perspective of regulating aptamer-protein interactions. Herein, we comprehensively introduce the methods for regulating aptamer-protein interactions and elaborate on the detection techniques for analyzing aptamer-protein interactions. Additionally, this review provides a broad summary of analytical assays based on the regulation of aptamer-protein interactions for detecting biomolecules. Finally, we present our perspectives regarding the opportunities and challenges of analytical assays for biological analysis, aiming to provide guidance for disease mechanism research and drug discovery.

Target-Synergized Biologically Mediated RAFT Polymerization for Electrochemical Aptasensing of Femtomolar Thrombin

The assay of thrombin levels is integral to the assessment of coagulation function and clinical screening of coagulation disorder-related diseases. In this work, we illustrate the ingenious use of the target-synergized biologically mediated reversible addition-fragmentation chain transfer (RAFT) polymerization (tsBMRP) as a novel amplification strategy for the electrochemical aptamer-based biosensing of thrombin at the femtomolar levels. Briefly, the tsBMRP-based strategy relies on the boronate affinity-mediated decoration of the glycan chain(s) of the target itself with RAFT agents and the subsequent recruitment of signal labels via BMRP, mediated by the direct reduction of RAFT agents by NADH into initiating/propagating radicals. Obviously, the tsBMRP-based strategy is biologically friendly, low-cost, and simple in operation. As thrombin is a glycoconjugate, its electrochemical aptasensing involves the use of the thrombin-binding aptamer (TBA) as the recognition receptor, the site-specific decoration of RAFT agents to the glycan chain of thrombin via boronate affinity, and further the recruitment of ferrocene signal labels via the BMRP of ferrocenylmethyl methacrylate (FcMMA). As boronate affinity results in the decoration of each glycan chain with tens of RAFT agents while BMRP recruits hundreds of signal labels to each RAFT agent-decorated site, the tsBMRP-based strategy allows us to detect thrombin at a concentration of 35.3 fM. This electrochemical aptasensor is highly selective, and its applicability to thrombin detection in serum samples has been further demonstrated. The merits of high sensitivity and selectivity, low cost, good anti-interference capability, and simple operation make the tsBMRP-based electrochemical thrombin aptasensor great promise in biomedical and clinical applications.

A catalytic hairpin assembly-based Förster resonance energy transfer sensor for ratiometric detection of ochratoxin A in food samples

Ochratoxin A (OTA) poses severe risks to the environment and human health, making the development of an accurate and sensitive analytical method for OTA detection essential. In this study, a catalytic hairpin assembly (CHA)-based Förster resonance energy transfer (FRET) aptasensor was developed to detect OTA using carbon quantum dots (CDs) and 6-carboxy-fluorescein (FAM) as dual signal readout. In the presence of OTA, the aptamer specifically interacted with OTA to release the helper DNA (HP), which could open the hairpin structure of FAM-labeled hairpin DNA 1 (H₁-FAM) modified on the surface of gold nanoparticles (AuNPs). CHA between H₁-FAM and hairpin H₂ labeled with CDs (H₂-CDs) can release HP for the next cycle, resulting in the occurrence of FRET with CDs as the energy donor and FAM as the energy acceptor. According to the ratio of F_CDs/F_FAM, the proposed aptasensor showed a wide linear range from 5.0 pg/mL to 3.0 ng/mL and a low detection limit of 1.5 pg/mL for OTA detection. Moreover, satisfactory results were obtained for OTA detection in rice, suggesting the potential application of this sensor in food safety analysis.

Electrochemical aptasensor based on Ce3NbO7/CeO2@Au hollow nanospheres by using Nb.BbvCI-triggered and bipedal DNA walker amplification strategy for zearalenone detection

Herein, an electrochemical aptasensor combining Nb.BbvCI-triggered bipedal DNA walking strategy was constructed for ultrasensitive assay of zearalenone (ZEN). The aptasensor used Ce₃NbO₇/CeO₂ @Au hollow nanospheres as electrode modification material and PdNi@MnO₂/MB as the signal label. Importantly, the Ce₃NbO₇/CeO₂ synthesized by hydrothermal method were combined with Au nanoparticles and applied to the electrode surface. The as-prepared Ce₃NbO₇/CeO₂ @Au possessed a large surface area, excellent electrical conductivity, stability and more binding sites. PdNi@MnO₂ with high specific surface area and porosity combined with molecule methylene blue (MB) was introduced into electrodes as the signal label. The proposed aptasensor utilized the advantages of specific recognition of aptamers and target molecules to release bipedal DNA walker (w-DNA), and then the w-DNA was triggered by Nb.BbvCI and entered the cycle to release more signal probes. The feasibility of this strategy was recorded by the differential pulse voltammetry (DPV) method. Under the optimized conditions, the electrochemical aptasensor exhibited a wide linear dynamic range from 1 × 10^-4 to 1 × 10³ ng mL^-1 with a low detection limit of 4.57 × 10^-6 ng mL^-1. Moreover, the aptasensor had high selectivity, good stability, excellent repeatability and provided an effective method for the trace detection of ZEN in real samples.

Recent Advances in Signal Amplification to Improve Electrochemical Biosensing for Infectious Diseases

The field of infectious disease diagnostics is burdened by inequality in access to healthcare resources. In particular, “point-of-care” (POC) diagnostics that can be utilized in non-laboratory, sub-optimal environments are appealing for disease control with limited resources. Electrochemical biosensors, which combine biorecognition elements with electrochemical readout to enable sensitive and specific sensing using inexpensive, simple equipment, are a major area of research for the development of POC diagnostics. To improve the limit of detection (LOD) and selectivity, signal amplification strategies have been applied towards these sensors. In this perspective, we review recent advances in electrochemical biosensor signal amplification strategies for infectious disease diagnostics, specifically biosensors for nucleic acids and pathogenic microbes. We classify these strategies into target-based amplification and signal-based amplification. Target-based amplification strategies improve the LOD by increasing the number of detectable analytes, while signal-based amplification strategies increase the detectable signal by modifying the transducer system and keep the number of targets static. Finally, we argue that signal amplification strategies should be designed with application location and disease target in mind, and that the resources required to produce and operate the sensor should reflect its proposed application, especially when the platform is designed to be utilized in low-resource settings. We anticipate that, based on current technologies to diagnose infectious diseases, incorporating signal-based amplification strategies will enable electrochemical POC devices to be deployed for illnesses in a wide variety of settings.

Recent Progress in DNA Hybridization Chain Reaction Strategies for Amplified Biosensing

With the continuous development of DNA nanotechnology, various spatial DNA structures and assembly techniques emerge. Hybridization chain reaction (HCR) is a typical example with exciting features and bright prospects in biosensing, which has been intensively investigated in the past decade. In this Spotlight on Applications, we summarize the assembly principles of conventional HCR and some novel forms of linear/nonlinear HCR. With advantages like great assembly kinetics, facile operation, and an enzyme-free and isothermal reaction, these strategies can be integrated with most mainstream reporters (e.g., fluorescence, electrochemistry, and colorimetry) for the ultrasensitive detection of abundant targets. Particularly, we select several representative studies to better illustrate the novel ideas and performances of HCR strategies. Theoretical and practical utilities are confirmed for a range of biosensing applications. In the end, a deep discussion is provided about the challenges and future tasks of this field.

New electrochemical method for programmed death-ligand 1 detection based on a paper-based microfluidic aptasensor

As programmed death-ligand 1 (PD-L1) is considered a referenced therapeutic biomarker, a rapid and low-cost method to detect PD-L1 in body fluids is necessary. In this work, a paper-based microfluidic aptasensor for label-free electrochemical detection of PD-L1 in liquids was fabricated. The aptasensor integrates a reaction cell and a three-electrode system, and a differential pulse voltammetry electrochemical method was adopted. PD-L1 aptamer with a low equilibrium dissociation constant was used as a biorecognition molecule. To bind the aptamer and assist in the electrochemical measurement, nanocomposites were synthesized and used to modify the working electrode, which was composed of an amine-functionalized single-walled carbon nanotube, new methylene blue and gold nanoparticles. The basic performance of the aptasensor was tested in phosphate-buffered saline: the linear range was between 10 pg mL^-1 and 2.5 ng mL^-1, and the detection limit was 10 pg mL^-1 (signal/noise = 3). Moreover, the aptasensor was used for the detection of serum samples and compared with an enzyme linked immunosorbent assay (ELISA). The results showed that the aptasensor provides a new low-cost, portable and highly sensitive detection method for PD-L1, as an alternative to ELISA.

The Application of Tetrahedral Framework Nucleic Acids as a Drug Carrier in Biomedicine Fields

In recent years, tetrahedral Framework Nucleic Acids(tFNAs) have become a hot topic in the field of DNA nanostructures because of their stable structures, nanoscale size, superior mechanical properties and convenient synthesis with high yield. tFNAs are considered promising drug delivery carriers because they can pass through the cellular membrane without any help and they have a good biocompatibility and biodegradability. Besides, they have rich modification sites, they can be modified by kinds of functional groups. The functionalization molecules can be modified on the vertexes, embedded between the double-stranded DNA of the tetrahedron edges, hanged on the edges, or encapsulated in the cage-like structure of the tetrahedron. The structure of tetrahedron can also be intelligently controlled through smart design, such as integrating DNA hairpin loop structure onto the edges. Nowadays, DNA tetrahedron will have a broader development prospect in the application of drug transport carriers and intelligent drug carriers. Therefore, DNA material is a new carrier material with great advantages and has a very broad application prospect in the construction of an intelligent drug transport system.

Lengthening the aptamer to hybridize with a stem-loop DNA assistant probe for the electrochemical detection of kanamycin with improved sensitivity

By adding 6 thymines to lengthen the parent aptamer combined with the change of "on" and "off" induced by the target for an assistant stem-loop DNA probe (ASP-SLP-MB), a new folding-type electrochemical kanamycin (Kana) aptamer-engineering dual-probe-based sensor (sensor d) was developed. By purposefully reducing the background current and increasing the electron transfer efficiency of methylene blue (MB), the sensor obtained significantly enhanced detection sensitivity compared with non-aptamer-engineering one-probe-based sensor (sensor a). Such efficacy was validated by a big decrease from 530.6 to 210.2 nA for the background current signal and from 360 to 0.3 nM for the detection limit. In addition to the improved sensitivity, the sensor also exhibited good selectivity, anti-fouling detection performance, and potential quantitative analysis ability, showing a feasible potential practical analytical application in real-life complicated samples, for example, milk and serum. The released results prove that the aptamer-engineering method is effective in improving the analytical performance of folding-type sensors and provides a methodological guidance for the design and fabrication of other high-performance folding-type aptasensors. Graphical abstract.