Label-Free Detection of Bacteria in Fruit Juice by Nano-Flow Cytometry

Rapid and Sensitive Quantification of Bacterial Viability Using Ratiometric Fluorescence Sensing

Bacterial viability assessment plays an important role in food-borne pathogen detection and antimicrobial drug development. Here, we first used GelRed as a DNA-binding stain for a bacterial viability assessment. It was found that live bacteria were able to exclude GelRed, which however could easily penetrate dead ones and be absorbed nonspecifically on the bacterial periplasm. Cations were used to reduce the nonspecific adsorption and greatly increase the red fluorescence ratio of dead to live bacteria. Combined with SYTO 9 (a membrane-permeable dye) for double-staining, a ratiometric fluorescent method was established. Using Escherichia coli O157:H7 as a bacteria model, the ratiometric fluorescent method can probe dead bacteria as low as 0.1%. A linear correlation between the ratiometric fluorescence and the theoretical ratio of dead bacteria was acquired, with a correlation coefficient R2 of 0.97. Advantages in sensitivity, accuracy, and safety of the GelRed/SYTO9-based ratiometric fluorescent method against traditional methods were demonstrated. The established method was successfully applied to the assessment of germicidal efficacy of different heat treatments. It was found that even 50 °C treatment could lead to the death of minor bacteria. The as-developed method has many potential applications in microbial researches, and we believe it could be expanded to the viability assessment of mammalian cells.

A Label-Free Optical Flow Cytometry Based-Method for Rapid Assay of Disinfectants' Bactericidal Activity

Selecting the appropriate disinfectant to control and prevent healthcare-associated infections (HAIs) is a challenging task for environmental health experts due to the large number of available disinfectant products. This study aimed to develop a label-free flow cytometry (FCM) method for the rapid evaluation of bactericidal activity and to compare its efficacy with that of standard qualitative/quantitative suspension tests. The bactericidal efficiency of eight commercial disinfectants containing quaternary ammonium compounds (QACs) was evaluated against four strains recommended by EN 13727 (Escherichia coli, Pseudomonas aeruginosa, Staphylococcus aureus, Enterococcus hirae) and four multidrug-resistant pathogens. The proposed FCM protocol measures changes in scattered light and counts following disinfectant exposure, neutralization, and culture steps. Unlike other available FCM-based methods, this approach does not rely on autofluorescence measurements, impedance cytometry, or fluorescent dyes. The FCM scattered light signals revealed both decreased count rates and morphological changes after treatment with minimum inhibitory concentrations (MICs) and higher concentrations for all tested bacteria. The results from the FCM measurements showed excellent correlation with those from standard assays, providing a rapid tool for monitoring the susceptibility profile of clinical, multidrug-resistant pathogens to chemical disinfectants, which could support infection prevention and control procedures for healthcare environments. This label-free FCM protocol offers a novel and rapid tool for environmental health experts, aiding in the optimization of disinfectant selection for the prevention and control of HAIs.

Photoaged polystyrene nanoplastics exposure results in reproductive toxicity due to oxidative damage in Caenorhabditis elegans

The increase of plastic production together with the incipient reuse/recycling system has resulted in massive discards into the environment. This has facilitated the formation of micro- and nanoplastics (MNPs) which poses major risk for environmental health. Although some studies have investigated the effects of pristine MNPs on reproductive health, the effects of weathered MNPs have been poorly investigated. Here we show in Caenorhabditis elegans that exposure to photoaged polystyrene nanoplastics (PSNP-UV) results in worse reproductive performance than pristine PSNP (i.e., embryonic/larval lethality plus a decrease in the brood size, accompanied by a high number of unfertilized eggs), besides it affects size and locomotion behavior. Those effects were potentially generated by reactive products formed during UV-irradiation, since we found higher levels of reactive oxygen species and increased expression of GST-4 in worms exposed to PSNP-UV. Those results are supported by physical-chemical characterization analyses which indicate significant formation of oxidative degradation products from PSNP under UV-C irradiation. Our study also demonstrates that PSNP accumulate predominantly in the gastrointestinal tract of C. elegans (with no accumulation in the gonads), being completely eliminated at 96 h post-exposure. We complemented the toxicological analysis of PSNP/PSNP-UV by showing that the activation of the stress response via DAF-16 is dependent of the nanoplastics accumulation. Our data suggest that exposure to the wild PSNP, i.e., polystyrene nanoplastics more similar to those actually found in the environment, results in more important reprotoxic effects. This is associated with the presence of degradation products formed during UV-C irradiation and their interaction with biological targets.

"Dramatic Growth" of Microbial Aerosols for Visualization and Accurate Counting of Bioaerosols

While the global COVID-19 pandemic has subsided, microbial aerosol detection has become of high concern. Timely, accurate, and highly sensitive monitoring of microbial aerosols in indoor air is the basis for effective prevention and control of infectious diseases. At present, no commercial equipment or reliable technology can simultaneously control the detection time and limit at 6 h and 102 CFU/mL, respectively. Based on the "safety size range" of particulate matter in the air, we propose a new method of microbial dilation detection, which enables the pathogen to grow rapidly and dramatically into a polymeric microsphere, larger in size than the coexisting aerosol particles. "Like a crane standing among chickens", the microorganism can be easily visualized and counted. Different from routine chemical and biological sensing technologies, this method can achieve absolute counting of microbial particles, and the simple principles can be developed into devices for different life scenarios.

Plastibodies for multiplexed detection and sorting of microplastic particles in high-throughput

Sensitive high-throughput analytic methodologies are needed to quantify microplastic particles (MPs) and thereby enable routine monitoring of MPs to ultimately secure animal, human, and environmental health. Here we report a multiplexed analytical and flow cytometry-based high-throughput methodology to quantify MPs in aqueous suspensions. The developed analytic MPs-quantification platform provides a sensitive as well as high-throughput detection of MPs that relies on the material binding peptide Liquid Chromatography Peak I (LCI) conjugated to Alexa-fluorophores (LCI_F16C-AF488, LCI_F16C-AF594, and LCI_F16C-AF647). These fluorescent material-binding peptides (also termed plastibodies) were used to fluorescently label polystyrene MPs, whereas Alexa-fluorophores alone exhibited a negligible background fluorescence. Mixtures of polystyrene MPs that varied in size (500 nm to 5 μm) and varied in labeled populations were analyzed and sorted into distinct populations reaching sorting efficiencies >90 % for 1 × 10⁶ sorted events. Finally, a multiplexed quantification and sorting with up to three plastibodies was successfully achieved to validate that the combination of plastibodies and flow cytometry is a powerful and generally applicable methodology for multiplexed analysis, quantification, and sorting of microplastic particles.

Development of Spectral Nano-Flow Cytometry for High-Throughput Multiparameter Analysis of Individual Biological Nanoparticles

Correlated analysis of multiple biochemical parameters at the single-particle level and in a high-throughput manner is essential for insights into the diversity and functions of biological nanoparticles (BNPs), such as bacteria and subcellular organelles. To meet this challenge, we developed a highly sensitive spectral nano-flow cytometer (S-nFCM) by integrating a spectral recording module to a laboratory-built nFCM that is 4-6 orders of magnitude more sensitive in side scattering detection and 1-2 orders of magnitude more sensitive in fluorescence detection than conventional flow cytometers. An electron-multiplying charge-coupled device (EMCCD) was used to acquire the full fluorescence spectra of single BNPs upon holographic grating dispersion. Up to 10,000 spectra can be collected in 1 min with 2.1 nm resolution. The precision, linearity, and sensitivity were examined. Complete discernment of single influenza viruses against the background signal, discrimination of different strains of marine cyanobacteria in a mixed sample based on their spectral properties of natural fluorescence, classification of bacterial categories exhibiting different patterns of antigen expression, and multiparameter analysis of single mitochondria for drug discovery were successfully demonstrated.

Bridge-DNA synthesis triggered by an allosteric aptamer for the colorimetric detection of pathogenic bacteria

Rapid and sensitive quantification of pathogenic bacteria is highly desired for environmental health supervision and food safety control. Yet, the amplification and detection of bacteria with a concentration lower than 10² cfu mL^-1 remains a great challenge. Here, we combined an allosteric aptamer (AAP) with a gold nanoparticle (AuNP) for assembling a bridge-DNA synthesis system (named as AuNP-BDS) to amplify the bacterial signals. The AAP and its paired primer (PP) were covalently linked to two different AuNPs, respectively: one named as AAP-AuNP and the other PP-AuNP. Upon recognition of the antigen from the pathogenic bacteria, AAP alters its conformation to initiate DNA synthesis on the AuNP surface. The DNA products from AAP-AuNP and PP-AuNP form bridges to each other through base pairing, resulting in the aggregation and colorimetric response of the AuNPs. By using E. coli O157:H7 as an example, the AuNP-BDS could quantify pathogenic bacteria in water with a concentration as low as 10 cfu mL^-1 within 60 min and without any enrichment. The colorimetric response values of AuNP-BDS were found to be linearly related to the bacterial concentrations in the range of 10 to 10³ cfu mL^-1. Good practicability of the AuNP-BDS in quantifying E. coli O157:H7 from tap water, juices, and milks was demonstrated. The AuNP-BDS could be exploited to facilitate the rapid and sensitive quantification of pathogenic bacteria for food safety control.

Sensitive NIR Fluorescence Identification of Bacteria in Whole Blood with Bioorthogonal Nanoprobes for Early Sepsis Diagnosis

Sepsis is one of the leading causes of death worldwide. The disease progression of sepsis is very fast, and there is a 7-9% increase in mortality every hour. Therefore, rapid and sensitive detection of pathogenic bacteria is crucial for the timely treatment of sepsis as well as the reduction of mortality. Herein, we present a sensitive near-infrared (NIR) fluorescence identification and a rapid magnetic capture based on bioorthogonal nanoprobes for the detection of multiple bacteria in whole blood. The nanoprobes with NIR fluorescence/magnetic properties were modified with dibenzocyclooctyne groups and used to capture and recognize the bacteria via bioorthogonal reaction. The magnetic nanoprobes showed superparamagnetic properties with a saturation magnetization as high as 63 emu/g. Through clicking with the azide groups inserted on the bacteria walls by metabolic engineering, the bioorthogonal magnetic nanoprobes allow fast and broad-spectrum capture of both Gram-positive and Gram-negative bacteria. The bioorthogonal NIR fluorescent nanoprobes with a maximum emission at 900 nm can effectively avoid background interference, further enabling sensitive identification of the bacteria in whole blood. The detection limit was as low as 4 CFU/mL in less than 2.5 h and the nanoprobes were successfully applied to the detection of bacteria in blood samples from the patients with sepsis, showing the potential application in early sepsis diagnosis and clinical studies.

Ag NP-filter paper based SERS sensor coupled with multivariate analysis for rapid identification of bacteria

Rapid and accurate identification of bacteria is essential to ensure food safety and prevent pathogenic bacterial infection. In this study, a highly efficient method was established for accurately identifying bacterial species by applying Ag NP-filter paper based Surface enhanced Raman spectroscopy (SERS) analysis and Partial Least Squares-Discriminant Analysis (PLS-DA) statistical methods. The flexible Ag NP filter paper substrate with high sensitivity and uniformity was prepared by a facile and low-cost silver mirror reaction at room temperature, which exhibited desirable SERS activity in bacteria detection. Furthermore, PLS-DA was successfully employed to distinguish SERS spectra from S. aureus CMCC 26003, E. faecalis ATCC29212 and L. monocytogenes ATCC 19115 with a sensitivity of 93.3-100%, specificity of 96.7-97%, and overall predicting accuracy of 95.8%. This exploratory study demonstrates that a Ag NP-filter paper based SERS sensor coupled with PLS-DA has great potential for rapid and effective detection and identification of bacteria.

Reusable and universal impedimetric sensing platform for the rapid and sensitive detection of pathogenic bacteria based on bacteria-imprinted polythiophene film

A bacteria-imprinted polythiophene film (BIF)-based impedimetric sensor was proposed for the rapid and sensitive detection of S. aureus. A significant improvement is the reduced time for both BIF fabrication (15 min) and bacterial capturing (10 min).

The Theoretical Model, Method, and Applications of Scattering Photon Burst Counting Based on an Objective Scanning Technique

Scattering photon burst counting (SPBC) is a single-particle detection method, which is based on measuring scattering photon bursting of single nanoparticles through a detection volume of <1 fL. Although SPBC has been used for bioassays and analysis of nanoparticles, it is necessary to establish its theoretical model and develop a new detection mode in order to further enhance its sensitivity and enlarge its application fields. In this paper, we proposed a theoretical model for the confocal SPBC method and developed a novel SPBC detection mode using the fast objective scanning technique. The computer simulations and experiments documented that this model well describes the relation between photon counts and experimental parameters (such as nanoparticle concentration and diameter, temperature, and viscosity). Based on this model, we developed a novel SPBC detection mode by using the fast objective scanning technique. Compared to the current confocal SPBC method, the sensitivity of this new method was significantly increased due to the significantly increased photon counts per sampling time, the linear detection range is from 0.9 to 90 pM, and the limit of detection is reduced to 40 fM for 30 nm gold nanoparticles. Furthermore, this new method was successfully applied to determine the enzyme activity of caspase-3 and evaluate the inhibition effectiveness of some inhibitors.

One-pot facile synthesis of enzyme-encapsulated Zn/Co-infinite coordination polymer nanospheres as a biocatalytic cascade platform for colorimetric monitoring of bacteria viability

A rapid method for colorimetric monitoring of bacterial viability is described. The colorimetric method was carried out based on glucose oxidase-encapsulated Zn/Co-infinite coordination polymer (Zn/Co-ICP@GOx), which was prepared in aqueous solution free of toxic organic solvents at room temperature. The Zn/Co-ICP@GOx was confirmed to be a robust sphere structure with an average diameter of 147.53 ± 20.40 nm. It integrated the catalytic activity of natural enzyme (GOx) and mimetic peroxidase (Co (П)) all in one, efficiently acting as a biocatalytic cascade platform for glucose catalytic reaction. Exhibiting good multi-enzyme catalytic activity, stability, and selectivity, Zn/Co-ICP@GOx can be used for colorimetric glucose detection. The linear range was 0.01-1.0 mmol/L, and the limit of detection (LOD) was 0.005 mmol/L. As the glucose metabolism is a common expression of bacteria, the remaining glucose can indirectly represent the bacterial viability. Hence, a Zn/Co-ICP@GOx-based colorimetric method was developed for monitoring of bacterial viability. The color was intuitively observed with the naked eye, and the bacterial viability was accurately quantified by measurement of the absorbance at 510 nm. The method was applied to determination of bacterial viability in water and milk samples with recoveries of 99.0-103% and RSD of 0.43-7.5%. The method was rapid (less than 40 min) and applicable to different bacterial species irrespective of Gram-positive and Gram-negative bacteria, providing a universal and promising strategy for real-time monitoring of bacterial viability.

SERS Sensors Based on Aptamer-Gated Mesoporous Silica Nanoparticles for Quantitative Detection of Staphylococcus aureus with Signal Molecular Release

This work describes a simple and novel biosensor for the quantitative determination of Staphylococcus aureus (S. aureus) based on target-induced release of signal molecules from aptamer-gated aminated mesoporous silica nanoparticles (MSNs) coupled with surface-enhanced Raman scattering (SERS) technology. MSNs were synthesized and then modified with amino groups by (3-aminopropyl) triethoxysilane to make them positively charged. Next, signal molecules (4-aminothiophenol, 4-ATP) were loaded into the pores of MSNs. Then, negatively charged aptamers of S. aureus were assembled on the surface of MSNs through electrostatic interactions. Upon the addition of S. aureus, the assembled aptamers were specifically bound to the bacteria. Consequently, the "gates" were opened, resulting in the release of 4-ATP from the pores of MSNs. The released molecules were measured by a Raman spectrometer, and the intensity of 4-ATP at 1071 cm^-1 was linearly related to the S. aureus concentration. A silver nanoflower silica core-shell structure (Ag NFs@SiO₂) was prepared and it served as a SERS substrate. Under optimized experimental conditions, a good linear relationship (y = 2107.93 + 1536.30x, R² = 0.9956) in the range from 4.7 × 10 to 4.7 × 10⁸ cfu/mL was observed with a limit of detection of 17 cfu/mL. The method was successfully applied for the analysis of S. aureus in fish samples and the recovery rate was 91.3-109%.

Multiplexed detection of bacterial pathogens based on a cocktail of dual-modified phages

Rapid, quantitative, and sensitive assays for the multiplexed detection of bacterial pathogens are urgently needed for public health. Here, we report the generation of dual-modified phage sensors for the simultaneous detection of multiple pathogenic bacteria. The M13KE phage was dual modified to display the targeting peptide on the minor coat protein pIII (∼5 copies) and the streptavidin-binding (StrB) peptide on the major coat protein pVIII (∼2700 copies). The targeting peptide specifically recognizes the target bacteria, and the StrB peptide acts as the efficient signal amplification and transduction unit upon binding with fluorescently tagged streptavidin. The bright fluorescence emitted from individual target bacteria can be clearly distinguished from the background via both the flow cytometry and fluorescence microscopy. Three different dual-modified phages targeting E. coli O157:H7, Salmonella Typhimurium, and Pseudomonas aeruginosa were constructed, and high specificity was verified via a large excess of other non-target bacteria. Using a 40 mL sample volume, the target bacteria detection limit was approximately 10² cells/mL via flow cytometry measurement in the presence of other non-target bacteria. By combining these three dual-modified phages into a cocktail, simultaneous detection and quantification of three target bacterial pathogens was demonstrated with good linearity. The strategy of constructing dual-modified phage represents a promising tool in the detection of bacterial pathogens.

Using a safe and effective fixative to improve the immunofluorescence staining of bacteria

The emerging and development of green chemistry has once again drawn the researchers' attention to eliminating the use and generation of hazardous materials. Here we report the use of a safe and effective fixative, chlorine dioxide (ClO₂), instead of traditional hazardous fixatives for the cross-linking of cellular proteins to improve immunofluorescence staining of bacteria. The concentration of ClO₂needed for 100% fixation is 50μg ml^-1, which is much lower than that of traditional fixatives (1000-10000μg ml^-1). The ClO₂mediated cross-linking can preserve the integrity of bacterial cells and prevent cell loss through lysis. Meanwhile, lysozyme can permeabilize the bacterial cells, allowing the labelled antibodies to diffuse to their intracellular target molecules. By usingE. coliO157:H7/RP4 as a gram-negative bacteria model, immunofluorescence staining assays for both intracellular protein and surface polysaccharide were carried out to investigate the effect of ClO₂fixation on the staining. The results demonstrated that ClO₂fixation could prevent the target antigens from cracking off the bacteria without damage on the interaction between the antibodies and antigens (either for polysaccharide or protein). As a safe and effective fixative, ClO₂has potential practical applications in immunofluorescence staining and fluorescencein situhybridization for single bacteria/cell analysis.

Electrochemical biosensor for rapid detection of bacteria based on facile synthesis of silver wire across electrodes

The early detection of bacteria is of critical importance in addressing serious public health problems. Here, an electrochemical biosensor for rapid detection of bacteria based on facile synthesis of silver wire across electrodes was constructed. High-variable region of 16S rRNA of bacteria was used as biomarker. Polymerase-free synthesis of silver wire was introduced into electrochemical signal transduction to improve the sensitivity of electrochemical detection. The construction biosensor of proposed method is as follows: Metastable hairpin probe H₁ was modified on electrode surface, biomarker can open the stem-loop structure of H₁ and activates HCR. The alternate opening of the stem-loop structure of H₁ and H₂-AuNPs finally results in the formation of long double-stranded DNA-RNA (HCR products) -AuNPs. The formed AuNPs modified HCR products was blown in one direction using N₂ to across the electrode gap. Using this HCR products as template, the silver wire was formed between the electrodes by silver deposition, and resulted in sharp change in electrical parameters of electrode. As the proof-of-concept work, multichannel series piezoelectric quartz crystal (MSPQC) was utilized as detector. The detection of Staphylococcus aureus in the concentration range from 50 to 10⁷ CFU/mL within 100 min was achieved. The detection limit was 50 CFU/mL. Escherichia coli, Salmonella enteritidis, Listeria innocua, Pseudomonas aeruginosa and Streptococcus pneumoniae did not interfere the detection results. This newly proposed electrochemical biosensor is simple, rapid and exhibit high signal-to-noise ratio, it has great potential for being applied in food safety monitoring and clinical diagnosis.