High Resolution Nanoscale Probing of Bacteriophages in an Inhalable Dry Powder Formulation for Pulmonary Infections

Phage formulations and delivery strategies: Unleashing the potential against antibiotic-resistant bacteria

Bacterial control promoted by bacteriophages (phages) is an attractive tool in the face of the antibiotic crisis triggered by the exacerbated use of these drugs. Despite the growing interest in using these viruses, some gaps still need answers, such as the protection and delivery of phages. Some limitation points involve the degradation of phage proteins by enzymes or inactivation in low-pH environments. In this review, a literature search using keywords related to the field of virus delivery formulations was done to understand the current scenario of using delivery techniques and phage formulations. A total of 2096 raw results were obtained, which resulted in 140 publications after refinement. These studies were analyzed for main application techniques and areas, keywords, and countries. Of the total, 57% of the publications occurred in the last five years, and the encapsulation technique was the most used among the articles analyzed. As excipient agents, lactose, trehalose, mannitol, PEG, and Leucine stand out. The development of phage formulations, protection approaches, their delivery routes, and the knowledge about the best application strategy enables the use of these organisms in several sectors. It can act as a powerful tool against antibiotic-resistant bacteria.

Stability of bacteriophages in organic solvents for formulations

Bacteriophages or phages used as an alternative therapy for treating multi-drug resistant infections require formulation consideration. Current strategies to produce phage formulations involving organic solvents are based on empirical practices without a good understanding of phage stability during formulation development. In this study, we investigated the effect of common formulation organic solvents (ethanol, isopropyl alcohol, tetrahydrofuran (THF) and dimethyl sulfoxide (DMSO)) on the stability of Pseudomonas aeruginosa-specific myovirus (PEV1, PEV20) and podovirus (PEV31) phages using biological assay, transmission electron microscopy (TEM) and scattering near field optical microscopy (SNOM). The three phages were mixed with the solvents at different concentrations (25%, 50%, and 75% (v/v)) for 20 min. All phages were fully viable in the organic solvents at 25% (v/v) showing negligible titre changes. At the higher solvent concentration of 50% (v/v), the myoviruses PEV1 and PEV20 remained relatively stable (titre loss 0.4-1.3 log10), whereas the podovirus PEV31 became less stable (titre loss 0.25-3.8 log10), depending on the solvent used. Increasing the solvent level to 75% (v/v) caused increased morphological changes in TEM and decreased viability as indicated by the titre loss (0.32-7.4 log10), with DMSO being the most phage-destabilising solvent. SNOM spectra showed differences in the signal intensity and peak positions in the amide I and amide II regions, revealing altered phage proteins by the solvents. In conclusion, the choice of the solvents for phage formulation depends on both the phages and solvent types. Our results showed (1) the phages are more stable in the alcohols than DMSO and THF, and (2) the myoviruses tend to be more stable than the podovirus in the solvents. Overall, a low to moderate (25-50 % v/v) level of organic solvents (except 50% THF) can be used in formulation of the phages without a substantial titre loss.

AFM-IR for Nanoscale Chemical Characterization in Life Sciences: Recent Developments and Future Directions

Despite the ubiquitous absorption of mid-infrared (IR) radiation by virtually all molecules that belong to the major biomolecules groups (proteins, lipids, carbohydrates, nucleic acids), the application of conventional IR microscopy to the life sciences remained somewhat limited, due to the restrictions on spatial resolution imposed by the diffraction limit (in the order of several micrometers). This issue is addressed by AFM-IR, a scanning probe-based technique that allows for chemical analysis at the nanoscale with resolutions down to 10 nm and thus has the potential to contribute to the investigation of nano and microscale biological processes. In this perspective, in addition to a concise description of the working principles and operating modes of AFM-IR, we present and evaluate the latest key applications of AFM-IR to the life sciences, summarizing what the technique has to offer to this field. Furthermore, we discuss the most relevant current limitations and point out potential future developments and areas for further application for fruitful interdisciplinary collaboration.

Applications of AFM-IR for drug delivery vector characterization: infrared, thermal, and mechanical characterization at the nanoscale

The development of effective drug delivery systems requires in-depth characterization of the micro- or nanostructure of the material vectors with high spatial resolution, resulting in a deep understanding of the design-function relationship and maximum therapeutic efficacy. Atomic force microscopy-infrared spectroscopy (AFM-IR) combines the high spatial resolution of AFM and the capabilities of IR spectroscopy to identify chemical composition and it has emerged as a powerful tool for the detailed characterization of a drug delivery system at the nanoscale. In addition, the instruments also allow thermal and mechanical evaluation at the nanoscale. In this review, we highlight the applications of AFM-IR in various drug delivery systems, including polymer-based carriers, lipid-contained nanocarriers, and metal-based nanocarriers. The existing challenges as well as the future perspectives for the application of AFM-IR for drug delivery vector characterization are also discussed.

Advanced structural characterisation of pharmaceuticals using nano-thermal analysis (nano-TA)

The production of drug delivery systems fabricated at the nano scale comes with the challenges of identifying reliable characterisation tools, especially for solid dosage forms. A full understanding of physicochemical properties of solid-state systems at a high spatial resolution is essential to monitor their manufacturability, processability, performance (dissolution) and stability. Nano-thermal analysis (nano-TA), a hybrid of atomic force microscopy (AFM) and thermal analysis, has emerged as a solution to address the need for complete characterisation of samples with surface heterogeneity. Nano-TA provides not only physical information using conventional AFM but also the thermal behaviour of these systems as an additional chemical dimension. In this review, the principles and techniques of nano-TA are discussed with emphasis on recent pharmaceutical applications. Building on nano-TA, the combination of this approach with infrared spectroscopic analysis is briefly introduced. The challenges and considerations for future development of nano-TA characterisation are also outlined.

Protein and peptide delivery to lungs by using advanced targeted drug delivery

The challenges and difficulties associated with conventional drug delivery systems have led to the emergence of novel, advanced targeted drug delivery systems. Therapeutic drug delivery of proteins and peptides to the lungs is complicated owing to the large size and polar characteristics of the latter. Nevertheless, the pulmonary route has attracted great interest today among formulation scientists, as it has evolved into one of the important targeted drug delivery platforms for the delivery of peptides, and related compounds effectively to the lungs, primarily for the management and treatment of chronic lung diseases. In this review, we have discussed and summarized the current scenario and recent developments in targeted delivery of proteins and peptide-based drugs to the lungs. Moreover, we have also highlighted the advantages of pulmonary drug delivery over conventional drug delivery approaches for peptide-based drugs, in terms of efficacy, retention time and other important pharmacokinetic parameters. The review also highlights the future perspectives and the impact of targeted drug delivery on peptide-based drugs in the coming decade.

Dry powder pharmaceutical biologics for inhalation therapy

Therapeutic biologics such as genes, peptides, proteins, virus and cells provide clinical benefits and are becoming increasingly important tools in respiratory medicine. Pulmonary delivery of therapeutic biologics enables the potential for safe and effective treatment option for respiratory diseases due to high bioavailability while minimizing absorption into the systemic circulation, reducing off-target toxicity to other organs. Development of inhalable powder formulation requires stabilization of complex biological materials, and each type of biologics may present unique challenges and require different formulation strategy combined with manufacture process to ensure biological and physical stabilities during production and over shelf-life. This review examines key formulation strategies for stabilizing proteins, nucleic acids, virus (bacteriophages) and bacterial cells in inhalable powders. It also covers characterization methods used to assess physicochemical properties and aerosol performance of the powders, biological activity and structural integrity of the biologics, and chemical analysis at the nanoscale. Furthermore, the review includes manufacture technologies which are based on lyophilization and spray-drying as they have been applied to manufacture Food and Drug Administration (FDA)-approved protein powders. In perspective, formulation and manufacture of inhalable powders for biologic are highly challenging but attainable. The key requirements are the stability of both the biologics and the powder, along with the powder dispersibility. The formulation to be developed depends on the manufacture process as it will subject the biologics to different stresses (temperature, mechanical and chemical) which could lead to degradation by different pathways. Stabilizing excipients coupled with the suitable choice of process can alleviate the stability issues of inhaled powders of biologics.

Bulk to Nanometer-Scale Infrared Spectroscopy of Pharmaceutical Dry Powder Aerosols

Solid state chemical analysis of pharmaceutical inhalation aerosols at the individual particle level has been an analytical challenge. These particles can range from a few nanometers to micrometers and are a complex mixture of drugs and excipients. Conventional analytical techniques cannot resolve the distribution of excipients and drugs at the submicrometer scale. Understanding the nanochemical composition of individual particles can be critical for pharmaceutical scientists to evaluate drug and excipient stability as well as the drug-drug or drug-excipient interactions that affect the aerosol performance of powders. Herein, we show the novel application of a combination of optical photothermal infrared (O-PTIR) spectroscopy and atomic force microscopy infrared (AFM-IR) spectroscopy to probe nanochemical domains of powders containing the inhaled corticosteroid fluticasone propionate and long-acting β2-agonist salmeterol xinafoate, which are widely used to treat asthma and chronic obstructive pulmonary disease. Three types of powder formulation were analyzed, including the commercial product Seretide, which is a physical mixture of the drugs with crystalline lactose, and two spray-dried powders containing the drugs along with either amorphous or crystalline lactose. We obtained spatially resolved O-PTIR and AFM-IR spectra confirming the presence of peaks related to fluticasone propionate at 1743, 1661, and 1700 cm^-1, salmeterol xinafoate at 1580 cm^-1, and lactose at 1030 and 1160 cm^-1. The location of the drugs and lactose among the particles varied significantly, depending on the formulation type. For the first time, it was possible to map the drug distribution in individual aerosol particles. This is significant as such information has been lacking, and it will open an exciting research direction on how drug distribution affects the aerosol performance of powders and the consistency of dose uniformity. Further, these advanced spectroscopic techniques can be applied to study a wide range of pharmaceutical formulations.

The Stabilizing Excipients in Dry State Therapeutic Phage Formulations

Phage therapy has gained prominence due to the increasing pathogenicity of "super bugs" and the rise of their multidrug resistance to conventional antibiotics. Dry state formulation of therapeutic phage is attractive to improve their "druggability" by increasing their shelf life, improving their ease of handling, and ultimately retaining their long-term potency. The use and selection of excipients are critical to stabilize phage in solid formulations and protect their viability from stresses encountered during the solidification process and long-term storage prior to use. Here, this review focuses on the current classes of excipients used to manufacture dry state phage formulations and their ability to stabilize and protect phage throughout the process, as discussed in the literature. We provide perspective of outstanding challenges involved in the formulation of dry state phage. We suggest strategies to improve excipient identification and selection, optimize the potential excipient combinations to improve phage viability during formulation, and evaluate new methodologies that can provide greater insight into phage-excipient interactions to improve design criteria to improve formulation of dry state phage therapeutics. Addressing these challenges opens up new opportunities to re-design and re-imagine phage formulations for improved efficacy as a pharmaceutical product.