Comprehensive Monosaccharide Composition Analysis of Insoluble Polysaccharides by Permethylation To Produce Methyl Alditol Derivatives for Gas Chromatography/Mass Spectrometry

Preparation of Rehmanniae Radix Praeparata Polysaccharide Iron(III) Complex and Evaluation of Its Biological Activity

This study extracted and purified a polysaccharide from Rehmanniae radix praeparata (RGP) with an average molecular weight. The structural characteristics of RGP and its iron (III) complex, RGP-Fe(III), were examined for their antioxidant properties and potential in treating iron deficiency anemia (IDA). Analysis revealed that RGP comprised Man, Rha, Gal, and Xyl, with a sugar residue skeleton featuring 1→3; 1→2, 3; and 1→2, 3, 4 linkages, among others. RGP-Fe(III) had a molecular weight of 4.39×104 Da. Notably, RGP-Fe(III) exhibited superior antioxidant activity compared to RGP alone. In IDA rat models, treatment with RGP-Fe(III) led to increased weight gain, restoration of key blood parameters including hemoglobin, red blood cells, and mean hemoglobin content, elevated serum iron levels, and decreased total iron-binding capacity. Histological examination revealed no observable toxic effects of RGP-Fe(III) on the liver and spleen. These findings suggest the potential of RGP-Fe(III) as a therapeutic agent for managing IDA and highlight its promising antioxidant properties.

Methylation-GC-MS/FID-Based Glycosidic Linkage Analysis of Unfractionated Polysaccharides in Red Seaweeds

Glycosidic linkage analysis was conducted on the unfractionated polysaccharides in alcohol-insoluble residues (AIRs) prepared from six red seaweeds (Gracilariopsis sp., Prionitis sp., Mastocarpus papillatus, Callophyllis sp., Mazzaella splendens, and Palmaria palmata) using GC-MS/FID analysis of partially methylated alditol acetates (PMAAs). The cell walls of P. palmata primarily contained mixed-linkage xylans and small amounts of sulfated galactans and cellulose. In contrast, the unfractionated polysaccharides of the other five species were rich in galactans displaying diverse 3,6-anhydro-galactose and galactose linkages with varied sulfation patterns. Different levels of cellulose were also observed. This glycosidic linkage method offers advantages for cellulose analysis over traditional monosaccharide analysis that is known for underrepresenting glucose in crystalline cellulose. Relative linkage compositions calculated from GC-MS and GC-FID measurements showed that anhydro sugar linkages generated more responses in the latter detection method. This improved linkage workflow presents a useful tool for studying polysaccharide structural variations across red seaweed species. Furthermore, for the first time, relative linkage compositions from GC-MS and GC-FID measurements, along with normalized FID and total ion current (TIC) chromatograms without peak assignments, were analyzed using principal component analysis (PCA) as a proof-of-concept demonstration of the technique's potential to differentiate various red seaweed species.

Acetylation in Ionic Liquids Dramatically Increases Yield in the Glycosyl Composition and Linkage Analysis of Insoluble and Acidic Polysaccharides

Glycosyl composition and linkage analyses are important first steps toward understanding the structural diversity and biological importance of polysaccharides. Failure to fully solubilize samples prior to analysis results in the generation of incomplete and poor-quality composition and linkage data by gas chromatography-mass spectrometry (GC-MS). Acidic polysaccharides also do not give accurate linkage results, because they are poorly soluble in DMSO and tend to undergo β-elimination during permethylation. Ionic liquids can solubilize polysaccharides, improving their derivatization and extraction for analysis. We show that water-insoluble polysaccharides become much more amenable to chemical analysis by first acetylating them in an ionic liquid. Once acetylated, these polysaccharides, having been deprived of their intermolecular hydrogen bonds, are hydrolyzed more readily for glycosyl composition analysis or methylated more efficiently for glycosyl linkage analysis. Acetylation in an ionic liquid greatly improves composition analysis of insoluble polysaccharides when compared to analysis without acetylation, enabling complete composition determination of normally recalcitrant polysaccharides. We also present a protocol for uronic acid linkage analysis that incorporates this preacetylation step. This protocol produces partially methylated alditol acetate derivatives in high yield with minimal β-elimination and gives sensitive linkage results for acidic polysaccharides that more accurately reflect the structures being analyzed. We use important plant polysaccharides to show that the preacetylation step leads to superior results compared to traditional methodologies.

Algal Polysaccharides-Based Hydrogels: Extraction, Synthesis, Characterization, and Applications

Hydrogels are three-dimensional crosslinked hydrophilic polymer networks with great potential in drug delivery, tissue engineering, wound dressing, agrochemicals application, food packaging, and cosmetics. However, conventional synthetic polymer hydrogels may be hazardous and have poor biocompatibility and biodegradability. Algal polysaccharides are abundant natural products with biocompatible and biodegradable properties. Polysaccharides and their derivatives also possess unique features such as physicochemical properties, hydrophilicity, mechanical strength, and tunable functionality. As such, algal polysaccharides have been widely exploited as building blocks in the fabrication of polysaccharide-based hydrogels through physical and/or chemical crosslinking. In this review, we discuss the extraction and characterization of polysaccharides derived from algae. This review focuses on recent advances in synthesis and applications of algal polysaccharides-based hydrogels. Additionally, we discuss the techno-economic analyses of chitosan and acrylic acid-based hydrogels, drawing attention to the importance of such analyses for hydrogels. Finally, the future prospects of algal polysaccharides-based hydrogels are outlined.

Composition and yield of non-cellulosic and cellulosic sugars in soluble and particulate fractions during consolidated bioprocessing of poplar biomass by Clostridium thermocellum

BACKGROUND

Terrestrial plant biomass is the primary renewable carbon feedstock for enabling transition to a sustainable bioeconomy. Consolidated bioprocessing (CBP) by the cellulolytic thermophile Clostridium thermocellum offers a single step microbial platform for production of biofuels and biochemicals via simultaneous solubilization of carbohydrates from lignocellulosic biomass and conversion to products. Here, solubilization of cell wall cellulosic, hemicellulosic, and pectic polysaccharides in the liquor and solid residues generated during CBP of poplar biomass by C. thermocellum was analyzed.

RESULTS

The total amount of biomass solubilized in the C. thermocellum DSM1313 fermentation platform was 5.8, 10.3, and 13.7% of milled non-pretreated poplar after 24, 48, and 120 h, respectively. These results demonstrate solubilization of 24% cellulose and 17% non-cellulosic sugars after 120 h, consistent with prior reports. The net solubilization of non-cellulosic sugars by C. thermocellum (after correcting for the uninoculated control fermentations) was 13 to 36% of arabinose (Ara), xylose (Xyl), galactose (Gal), mannose (Man), and glucose (Glc); and 15% and 3% of fucose and glucuronic acid, respectively. No rhamnose was solubilized and 71% of the galacturonic acid (GalA) was solubilized. These results indicate that C. thermocellum may be selective for the types and/or rate of solubilization of the non-cellulosic wall polymers. Xyl, Man, and Glc were found to accumulate in the fermentation liquor at levels greater than in uninoculated control fermentations, whereas Ara and Gal did not accumulate, suggesting that C. thermocellum solubilizes both hemicelluloses and pectins but utilizes them differently. After five days of fermentation, the relative amount of Rha in the solid residues increased 21% indicating that the Rha-containing polymer rhamnogalacturonan I (RG-I) was not effectively solubilized by C. thermocellum CBP, a result confirmed by immunoassays. Comparison of the sugars in the liquor versus solid residue showed that C. thermocellum solubilized hemicellulosic xylan and mannan, but did not fully utilize them, solubilized and appeared to utilize pectic homogalacturonan, and did not solubilize RG-I.

CONCLUSIONS

The significant relative increase in RG-I in poplar solid residues following CBP indicates that C. thermocellum did not solubilize RG-I. These results support the hypothesis that this pectic glycan may be one barrier for efficient solubilization of poplar by C. thermocellum.

A quantitative method for polysaccharides based on endo-enzymatic released specific oligosaccharides: A case of Lentinus edodes

Polysaccharides exhibit multiple pharmacological activities, which are closely related to their structural characteristics. Therefore, quantitative quality control of polysaccharides based on chemical properties is of importance for their applications. However, polysaccharides are mixed macromolecular compounds that are difficult to separate, and the lack of standards made direct quantification more difficult. In this study, we proposed a new quantitative method based on the released specific oligosaccharides for polysaccharides from Lentinus edodes (shiitake) and other related fungi. Specific oligosaccharides were firstly released from polysaccharides using 1,3-β-glucanase, then derivatized with 2-aminobenzamide (2-AB), which further separated by hydrophilic interaction chromatography (HILIC) and quantitatively determined by UPLC coupled with fluorescence detector (FLR). Laminaritriose was used as the universal standard for quantification of all the oligosaccharides. This method was validated according to linearity, limit of detection, limit of quantitation, precision, accuracy, repeatability and stability. In addition, the four specific oligosaccharides released from polysaccharides in L. edodes were qualitatively analyzed by extracted ion chromatogram (EIC) from UPLC-MS profiles, which were identified to be disaccharide, trisaccharide and tetrasccharide. The proposed strategy not only realized the quantitative analysis of polysaccharides by UPLC-FLR, but also could achieve the qualitative distinction of different polysaccharides.

Comprehensive analysis of natural polysaccharides from TCMs: a generic approach based on UPLC-MS/MS

Here, we report a new application using liquid chromatography-electrospray mass spectrometry (UHPLC-ESI-MS) using aldononitrile acetate derivatives for simultaneous baseline separation and detection of eight neutral saccharides, two uronic acids, one ketose, and eight alditols within 14 min. The separation was performed on a Cortecs C₁₈ column using acetonitrile (A) and water (B) as the mobile phase with gradient elution. The target components were detected in selected ion monitoring (SIM) mode by mass spectrometry with an electrospray ionization (ESI) source operating in positive ionization mode. A comparison with traditional methods was used to determine the validity of the results. The UHPLC-ESI-MS method was used for quantitative analysis of free carbohydrates in water extracts of Crataegus pinnatifida as well as determination of Polygonatum cyrtonema and Glossy ganoderma monosaccharides in polysaccharides. The results demonstrate that this protocol is a comprehensive and effective technique for qualitative and quantitative analysis of plant polysaccharides from TCMs.

Lipopolysaccharide associated with β-2,6 fructan mediates TLR4-dependent immunomodulatory activity in vitro

Levan, a β-2,6 fructofuranose polymer produced by microbial species, has been reported for its immunomodulatory properties via interaction with toll-like receptor 4 (TLR4) which recognises lipopolysaccharide (LPS). However, the molecular mechanisms underlying these interactions remain elusive. Here, we investigated the immunomodulatory properties of levan using thoroughly-purified and characterised samples from Erwinia herbicola and other sources. E. herbicola levan was purified by gel-permeation chromatography and LPS was removed from the levan following a novel alkali treatment developed in this study. E. herbicola levan was then characterised by gas chromatography-mass spectrometry and NMR. We found that levan containing LPS, but not LPS-depleted levan, induced TLR4-mediated cytokine production by bone marrow-derived dendritic cells and/or activated TLR4 reporter cells. These data indicated that the immunomodulatory properties of the levan toward TLR4-expressing immune cells were mediated by the LPS. This work also demonstrates the importance of LPS removal when assessing the immunomodulatory activity of polysaccharides.

Non-derivatization strategy for the comprehensive characterization of neutral monosaccharide isomers and neutral disaccharide isomers using hydrophilic interaction liquid chromatography coupled to quadrupole/time-of-flight mass spectrometry

Monosaccharide isomers and disaccharide isomers widely exist in nature, playing a key role in a number of important biological processes. However, due to high structural similarity and high polarity, the characterization of monosaccharide isomers, disaccharide isomers, as well as the analysis of monosaccharide composition of polysaccharides by a method that does not require derivatization is an ongoing challenge. Herein, we proposed a simple method for rapid discrimination of non-derivatized neutral monosaccharide, and disaccharide isomers using hydrophilic interaction liquid chromatography coupled to quadrupole/time-of-flight mass spectrometry (HILIC-Q/TOF-MS). In this work, we optimized the experimental parameters, and detailed approaches to discriminate the precursor ions, deprotonated ions, and fragment ions are proposed, as well. To discriminate the various ions, the retention times, the relative abundance (RA) of precursor ions and fragment ions at different collision energies, the relative abundance ratio (RAR) of fragment ions to deprotonated ions or precursor ions were considered for characterization of neutral monosaccharide and disaccharide isomers. Finally, this strategy was successfully applied to analyzing the monosaccharide composition of neutral disaccharides, polysaccharides, and an aqueous extract of Moringa oleifera seeds. The experimental results revealed that the HILIC-Q/TOF-MS is an effective and convenient strategy for rapid differentiation of monosaccharide isomers and disaccharide isomers, which may serve as a general platform for the analysis of neutral polysaccharides, food, medicinal plants, and herbs.

Rapid fingerprint analysis for herbal polysaccharides using direct analysis in real-time ionization mass spectrometry

RATIONALE

Herbal polysaccharides have various potential medicinal values. Development of reliable analytical method for the fingerprint analysis of polysaccharides is critical for their quality assessment, origin identification, and authenticity evaluation.

METHODS

Mechanochemical extraction (MCE) was used to extract polysaccharide components from different herbal species. Intact polysaccharides were then directly analyzed by direct analysis in real-time mass spectrometry (DART-MS). Standard addition method with isotope-labeled internal standard was used to quantify polysaccharide amounts directly from liquid extract. Multivariate data analysis was further conducted for species classification.

RESULTS

The intact and large polysaccharides were decomposed into small fragment ions less than m/z 350 instantaneously using DART ion source. Different polysaccharides showed distinguished fingerprint DART-MS spectra using both individual and mixed herbal species. The liquid supernatant from MCE was validated to be used as direct sample for DART-MS analysis. Quantitation was successfully achieved for polysaccharide contents in Dendrobium officinale from different locations.

CONCLUSIONS

A rapid fingerprint protocol in combination of MCE and DART-MS for herbal polysaccharides was developed. The whole process could be accomplished within a few minutes, from raw materials to final spectra, without requirements of pre-digestion and additional sample purification.

A Multidimensional Mass Spectrometry-Based Workflow for De Novo Structural Elucidation of Oligosaccharides from Polysaccharides

Carbohydrates play essential roles in a variety of biological processes that are dictated by their structures. However, characterization of carbohydrate structures remains extremely difficult and generally unsolved. In this work, a de novo mass spectrometry-based workflow was developed to isolate and structurally elucidate oligosaccharides to provide sequence, monosaccharide compositions, and glycosidic linkage positions. The approach employs liquid chromatography-tandem mass spectrometry (LC-MS/MS)-based methods in a 3-dimensional concept: one high performance liquid chromatography-quadrupole time-of-flight mass spectrometry (HPLC-QTOF MS) analysis for oligosaccharide sequencing and two ultra high performance liquid chromatography-triple quadrupole mass spectrometry (UHPLC-QqQ MS) analyses on fractionated oligosaccharides to determine their monosaccharides and linkages compositions. The workflow was validated by applying the procedure to maltooligosaccharide standards. The approach was then used to determine the structures of oligosaccharides derived from polysaccharide standards and whole food products. The integrated LC-MS workflow will reveal the in-depth structures of oligosaccharides.

LC-MS/MS-based non-isotopically paired labeling (NIPL) strategy for the qualification and quantification of monosaccharides

Investigation into monosaccharides is critical for studies of oligosaccharides structure and function in biological processes. However, monosaccharides quantification is still challenge due to their isomeric structure and high hydrophilic properties. Besides, it was difficult to obtain isotopic internal standards (IS) of each monosaccharide in complex matrixes. Herein, we developed a novel strategy for the qualification and quantification of monosaccharides in urine using two structure analogs 1-(4-methylphenyl)-3-methyl-5-pyrazolone (MPMP) and1-phenyl-3-methyl-5-pyrazolone (PMP) as non-isotopically paired labeling (NIPL) reagents by liquid chromatograph-tandem mass spectrometry (LC-MS/MS). The derivatized monosaccharides by NIPL method not only had sufficient retention time differences on reversed-phase column, but also exhibited predominant product ion pairs (m/z 189 & m/z 175) in the multiple reaction monitoring (MRM) mode. In this method, PMP labeled standards were adopted as one-to-one internal standards (ISs). 12 urinary monosaccharides were successfully determined and the linear ranges expanded five orders of magnitude with limit of quantification (LOQ) varied from 0.09 ng mL^-1 to 0.36 ng mL^-1 as well as the accuracy higher than 98.15% and the relative standard derivation (RSD) lower than 7.92%. With assistance of multivariate analysis, the targeted monosaccharide biomarkers were firstly obtained for the diagnosis of bladder cancer. By the inexpensive NIPL reagents-MPMP/PMP, the developed strategy possessed the specific advantages of low cost, simple operation, high sensitivity and high accuracy for the qualification and quantitation of monosaccharides. As expected, this method will provide an alternative application potential for targeted metabolomics analysis.

Structural basis of Blastomyces Endoglucanase-2 adjuvancy in anti-fungal and -viral immunity

The development of safe subunit vaccines requires adjuvants that augment immunogenicity of non-replicating protein-based antigens. Current vaccines against infectious diseases preferentially induce protective antibodies driven by adjuvants such as alum. However, the contribution of antibody to host defense is limited for certain classes of infectious diseases such as fungi, whereas animal studies and clinical observations implicate cellular immunity as an essential component of the resolution of fungal pathogens. Here, we decipher the structural bases of a newly identified glycoprotein ligand of Dectin-2 with potent adjuvancy, Blastomyces endoglucanase-2 (Bl-Eng2). We also pinpoint the developmental steps of antigen-specific CD4⁺ and CD8⁺ T responses augmented by Bl-Eng2 including expansion, differentiation and tissue residency. Dectin-2 ligation led to successful systemic and mucosal vaccination against invasive fungal infection and Influenza A infection, respectively. O-linked glycans on Bl-Eng2 applied at the skin and respiratory mucosa greatly augment vaccine subunit- induced protective immunity against lethal influenza and fungal pulmonary challenge.

Fungal disease remains a challenging clinical and public health problem in part because there is no commercial vaccine available. The lack of suitable adjuvants is a critical barrier to developing safe and effective vaccines against fungal pathogens. Current adjuvants such as alum preferentially induce antibody responses which may be limited in mediating protection against fungi. Clinical observations and animal studies implicate cellular immunity as the essential component for the resolution of fungal infections. We have recently discovered an adjuvant that augments cell mediated immune responses and vaccine induced protection against fungi. Here, we identified the structural and mechanistic requirements by which this newly discovered adjuvant induces cell mediated immunity against fungi. As a proof of principle we also demonstrate that the adjuvant drives cellular immune responses against viruses such as influenza. We anticipate that our adjuvant can be used for vaccination with safe subunit vaccines against many microbial pathogens including viruses, intracellular bacteria, fungi and parasites that require cell mediated immune responses.

Saccharide analysis of onion outer epidermal walls

BACKGROUND

Epidermal cell walls have special structural and biological roles in the life of the plant. Typically they are multi-ply structures encrusted with waxes and cutin which protect the plant from dehydration and pathogen attack. These characteristics may also reduce chemical and enzymatic deconstruction of the wall for sugar analysis and conversion to biofuels. We have assessed the saccharide composition of the outer epidermal wall of onion scales with different analytical methods. This wall is a particularly useful model for cell wall imaging and mechanics.

RESULTS

Epidermal walls were depolymerized by acidic methanolysis combined with 2M trifluoracetic acid hydrolysis and the resultant sugars were analyzed by high-performance anion-exchange chromatography with pulsed amperometric detection (HPAEC-PAD). Total sugar yields based on wall dry weight were low (53%). Removal of waxes with chloroform increased the sugar yields to 73% and enzymatic digestion did not improve these yields. Analysis by gas chromatography/mass spectrometry (GC/MS) of per-O-trimethylsilyl (TMS) derivatives of the sugar methyl glycosides produced by acidic methanolysis gave a high yield for galacturonic acid (GalA) but glucose (Glc) was severely reduced. In a complementary fashion, GC/MS analysis of methyl alditols produced by permethylation gave substantial yields for glucose and other neutral sugars, but GalA was severely reduced. Analysis of the walls by 13C solid-state NMR confirmed and extended these results and revealed 15% lipid content after chloroform extraction (potentially cutin and unextractable waxes).

CONCLUSIONS

Although exact values vary with the analytical method, our best estimate is that polysaccharide in the outer epidermal wall of onion scales is comprised of homogalacturonan (~ 50%), cellulose (~ 20%), galactan (~ 10%), xyloglucan (~ 10%) and smaller amounts of other polysaccharides. Low yields of specific monosaccharides by some methods may be exaggerated in epidermal walls impregnated with waxes and cutin and call for cautious interpretation of the results.

Hydrogel-Forming Algae Polysaccharides: From Seaweed to Biomedical Applications

With the increasing growth of the algae industry and the development of algae biorefinery, there is a growing need for high-value applications of algae-extracted biopolymers. The utilization of such biopolymers in the biomedical field can be considered as one of the most attractive applications but is challenging to implement. Historically, polysaccharides extracted from seaweed have been used for a long time in biomedical research, for example, agarose gels for electrophoresis and bacterial culture. To overcome the current challenges in polysaccharides and help further the development of high-added-value applications, an overview of the entire polysaccharide journey from seaweed to biomedical applications is needed. This encompasses algae culture, extraction, chemistry, characterization, processing, and an understanding of the interactions of soft matter with living organisms. In this review, we present algae polysaccharides that intrinsically form hydrogels: alginate, carrageenan, ulvan, starch, agarose, porphyran, and (nano)cellulose and classify these by their gelation mechanisms. The focus of this review further lays on the culture and extraction strategies to obtain pure polysaccharides, their structure-properties relationships, the current advances in chemical backbone modifications, and how these modifications can be used to tune the polysaccharide properties. The available techniques to characterize each organization scale of a polysaccharide hydrogel are presented, and the impact on their interactions with biological systems is discussed. Finally, a perspective of the anticipated development of the whole field and how the further utilization of hydrogel-forming polysaccharides extracted from algae can revolutionize the current algae industry are suggested.

Combined whole cell wall analysis and streamlined in silico carbohydrate-active enzyme discovery to improve biocatalytic conversion of agricultural crop residues

The production of biofuels as an efficient source of renewable energy has received considerable attention due to increasing energy demands and regulatory incentives to reduce greenhouse gas emissions. Second-generation biofuel feedstocks, including agricultural crop residues generated on-farm during annual harvests, are abundant, inexpensive, and sustainable. Unlike first-generation feedstocks, which are enriched in easily fermentable carbohydrates, crop residue cell walls are highly resistant to saccharification, fermentation, and valorization. Crop residues contain recalcitrant polysaccharides, including cellulose, hemicelluloses, pectins, and lignin and lignin-carbohydrate complexes. In addition, their cell walls can vary in linkage structure and monosaccharide composition between plant sources. Characterization of total cell wall structure, including high-resolution analyses of saccharide composition, linkage, and complex structures using chromatography-based methods, nuclear magnetic resonance, -omics, and antibody glycome profiling, provides critical insight into the fine chemistry of feedstock cell walls. Furthermore, improving both the catalytic potential of microbial communities that populate biodigester reactors and the efficiency of pre-treatments used in bioethanol production may improve bioconversion rates and yields. Toward this end, knowledge and characterization of carbohydrate-active enzymes (CAZymes) involved in dynamic biomass deconstruction is pivotal. Here we overview the use of common "-omics"-based methods for the study of lignocellulose-metabolizing communities and microorganisms, as well as methods for annotation and discovery of CAZymes, and accurate prediction of CAZyme function. Emerging approaches for analysis of large datasets, including metagenome-assembled genomes, are also discussed. Using complementary glycomic and meta-omic methods to characterize agricultural residues and the microbial communities that digest them provides promising streams of research to maximize value and energy extraction from crop waste streams.

Rhamnose in plants - from biosynthesis to diverse functions

In plants, the deoxy sugar l-rhamnose is widely present as rhamnose-containing polymers in cell walls and as part of the decoration of various specialized metabolites. Here, we review the current knowledge on the distribution of rhamnose, highlighting the differences between what is known in dicotyledoneuos compared to commelinid monocotyledoneous (grasses) plants. We discuss the biosynthesis and transport of UDP-rhamnose, as well as the transfer of rhamnose from UDP-rhamnose to various primary and specialized metabolites. This is carried out by rhamnosyltransferases, enzymes that can use a large variety of substrates. Some unique characteristics of rhamnose synthases, the multifunctional enzymes responsible for the conversion of UDP-glucose into UDP-rhamnose, are considered, particularly from the perspective of their ability to convert glucose present in flavonoids. Finally, we discuss how little is still known with regards to how plants rescue rhamnose from the many compounds to which it is linked, or how rhamnose is catabolized.

Characterization of the cell wall of a mushroom forming fungus at atomic resolution using solid-state NMR spectroscopy

Cell walls are essential in the interaction of fungi with the (a)biotic environment and are also key to hyphal morphogenesis and mechanical strength. Here, we used solid-state NMR (ssNMR) spectroscopy combined with HPLC and GC-MS to study the structural organization of the cell wall of a representative of the Basidiomycota, one of the two main phyla of fungi. Based on the data we propose a refined model for the cell wall of a basidiomycete. In this model, the rigid core is built from α- and β-(1,3)-glucan, β-(1,3)-(1,6)-glucan, highly branched and single stranded β-(1,4)-chitin as well as polymeric fucose. The mobile fraction of the cell wall is composed of β-(1,3)-glucan, β-(1,3)-(1,6)-glucan, β-(1,6)-glucan, α-linked reducing and non-reducing ends and polymeric mannose. Together, these findings provide novel insights into the structural organization of the cell wall of the model basidiomycete S. commune that was previously based on destructive chemical and enzymatic analysis.

Combinatorial Glycomic Analyses to Direct CAZyme Discovery for the Tailored Degradation of Canola Meal Non-Starch Dietary Polysaccharides

Canola meal (CM), the protein-rich by-product of canola oil extraction, has shown promise as an alternative feedstuff and protein supplement in poultry diets, yet its use has been limited due to the abundance of plant cell wall fibre, specifically non-starch polysaccharides (NSP) and lignin. The addition of exogenous enzymes to promote the digestion of CM NSP in chickens has potential to increase the metabolizable energy of CM. We isolated chicken cecal bacteria from a continuous-flow mini-bioreactor system and selected for those with the ability to metabolize CM NSP. Of 100 isolates identified, Bacteroides spp. and Enterococcus spp. were the most common species with these capabilities. To identify enzymes specifically for the digestion of CM NSP, we used a combination of glycomics techniques, including enzyme-linked immunosorbent assay characterization of the plant cell wall fractions, glycosidic linkage analysis (methylation-GC-MS analysis) of CM NSP and their fractions, bacterial growth profiles using minimal media supplemented with CM NSP, and the sequencing and de novo annotation of bacterial genomes of high-efficiency CM NSP utilizing bacteria. The SACCHARIS pipeline was used to select plant cell wall active enzymes for recombinant production and characterization. This approach represents a multidisciplinary innovation platform to bioprospect endogenous CAZymes from the intestinal microbiota of herbivorous and omnivorous animals which is adaptable to a variety of applications and dietary polysaccharides.

Production of a codonopsis polysaccharide iron complex and evaluation of its properties

A water extraction and alcohol precipitation method was applied to extract polysaccharides from Codonopsis pilosula (CPP), response surface methodology was used to optimize the extraction conditions and synthesis of C. pilosula polysaccharide iron (CPPI), and the properties of CPPI were evaluated. The optimum extraction conditions for CPP were as follows: liquid-solid ratio of 29.39 mL/g, time of 1.25 h and temperature of 62.84 °C. The optimum synthesis conditions for CPPI were pH 8.9, temperature 70.30 °C and the ratio of citric acid to CPP1 of 2.95. An HPSEC-MALLS-RID system, UV spectroscopy, FT-IR spectroscopy and NMR were used for characterization of the polysaccharide. CPPI exhibited antioxidant activity in vitro and a relatively strong inhibitory effect on A2780 cells growth. After CPPI treatment, the reactive oxygen species increased, the mitochondrial membrane potential decreased, and DNA damage was observed in A2780 cells. Therefore, CPPI should be explored as a potential antioxidant and an antitumor drug in a clinical setting.

Evaluating the Utility of Permethylated Polysaccharide Solution NMR Data for Characterization of Insoluble Plant Cell Wall Polysaccharides

Plant cell wall polysaccharide analysis encompasses the utilization of a variety of analytical tools, including gas and liquid chromatography, mass spectrometry (MS), and nuclear magnetic resonance (NMR) spectroscopy. These methods provide complementary data, which enable confident structural proposals of the many complex polysaccharide structures that exist in the complex matrices of plant cell walls. However, cell walls contain fractions of varying solubilities, and a few techniques are available that can analyze all fractions simultaneously. We have discovered that permethylation affords the complete dissolution of both soluble and insoluble polysaccharide fractions of plant cell walls in organic solvents such as chloroform or acetonitrile, which can then be analyzed by a number of analytical techniques including MS and NMR. In this work, NMR structure analysis of 10 permethylated polysaccharide standards was undertaken to generate chemical shift data providing insights into spectral changes that result from permethylation of polysaccharide residues. This information is of especial relevance to the structure analysis of insoluble polysaccharide materials that otherwise are not easily investigated by solution-state NMR methodologies. The preassigned NMR chemical shift data is shown to be vital for NMR structure analysis of minor polysaccharide components of plant cell walls that are particularly difficult to assign by NMR correlation data alone. With the assigned chemical shift data, we analyzed the permethylated samples of destarched, alcohol-insoluble residues of switchgrass and poplar by two-dimensional NMR spectral profiling. Thus, we identified, in addition to the major polysaccharide components, two minor polysaccharides, namely, <5% 3-linked arabinoxylan (switchgrass) and <2% glucomannan (poplar). In particular, the position of the arabinose residue in the arabinoxylan of the switchgrass sample was confidently assigned based on chemical shift values, which are highly sensitive to local chemical environments. Furthermore, the high resolution afforded by the ¹H NMR spectra of the permethylated switchgrass and poplar samples allowed facile relative quantitative analysis of their polysaccharide composition, utilizing only a few milligrams of the cell wall material. The concepts herein developed will thus facilitate NMR structure analysis of insoluble plant cell wall polysaccharides, more so of minor cell wall components that are especially challenging to analyze with current methods.

Structural characterization of exopolysaccharide from Streptococcus thermophilus ASCC 1275

In this study, we purified and characterized exopolysaccharide (EPS) produced by a high-EPS-producing dairy starter bacterium, Streptococcus thermophilus ASCC 1275. Crude EPS was extracted from S. thermophilus ASCC 1275 and partially purified using dialysis. Further purification and fractionation of exopolysaccharide was conducted using HPLC on a Superose 6 column (Cytiva/Global Life Sciences Solutions, Marlborough, MA). Glycosyl composition analysis, linkage analysis along with 1-dimensional and 2-dimensional nuclear magnetic resonance spectroscopy were performed to deduce the structure of EPS. Three fractions (F) obtained from gel permeation chromatography were termed F1 (2.6%), F2 (45.8%), and F3 (51.6%) with average molecular weights of approximately 511, 40, and 5 kDa, respectively. Monosaccharide composition analysis revealed the dominance of glucose, galactose, and mannose in all 3 fractions. Major linkages observed in F3 were terminal galactopyranosyl (t-Gal), 3-linked glucopyranosyl (3-Glc), 3-linked galactofuranosyl (3-Galf), and 3,6-linked glucopyranosyl (3,6-Glc) and major linkages present in F2 were 4-Glc (48 mol%), followed by terminal mannopyranosyl (t-Man), 2- + 3-linked mannopyranosyl (2-Man+3-Man), and 2,6-linked mannopyranosyl (2,6-Man; total ∼28 mol%). The 1-dimensional and 2-dimensional nuclear magnetic resonance spectroscopy revealed that F2 comprised mannans linked by (1→2) linkages and F3 consisted of linear chains of α-d-glucopyranosyl (α-d-Glcp), β-d-glucopyranosyl (β-d-Glcp), and β-d-galactofuranosyl (β-d-Galf) connected by (1→3) linkages; branching was through (1→6) linkage in F3. A possible structure of EPS in F2 and F3 was proposed.

Polysaccharide extracted from Huperzia serrata using response surface methodology and its biological activity

In this study, Huperzia serrata polysaccharide (HSP) fraction was isolated using response surface methodology (RSM) and Box-Behnken design (BBD). The extraction time, temperature and ratio of water to raw material were employed effects. And properties of four polysaccharide (60%-HSP, 70%-HSP, 80%-HSP and 90%-HSP) were evaluated. The results indicated that the optimal extraction conditions were the following: 3.07 h, 49.46 °C and a liquid material ratio of 20.73:1. The four HSP presented irregular aggregation of shape. And all HSP exhibited antioxidant and anticancer activities.

Novel methods in glycomics: a 2019 update

Introduction: Glycomics, which aims to define the glycome of a biological system to better assess the biological attributes of the glycans, has attracted increasing interest. However, the complexity and diversity of glycans present challenging barriers to glycome definition. Technological advances are major drivers in glycomics.Areas covered: This review summarizes the main methods and emphasizes the most recent advances in mass spectrometry-based methods regarding glycomics following the general workflow in glycomic analysis.Expert opinion: Recent mass spectrometry-based technological advances have significantly lowered the barriers in glycomics. The field of glycomics is moving toward both generic and precise analysis.