An Acetone Sensor Based on Plasma-Assisted Cataluminescence and Mechanism Studies by Online Ionizations

Sniffing Like a Wine Taster: Multiple Overlapping Sniffs (MOSS) Strategy Enhances Electronic Nose Odor Recognition Capability

As highly promising devices for odor recognition, current electronic noses are still not comparable to human olfaction due to the significant disparity in the number of gas sensors versus human olfactory receptors. Inspired by the sniffing skills of wine tasters to achieve better odor perception, a multiple overlapping sniffs (MOSS) strategy is proposed in this study. The MOSS strategy involves rapid and continuous inhalation of odorants to stimulate the sensor array to generate feature-rich temporal signals. Computational fluid dynamics simulations are performed to reveal the mechanism of complex dynamic flows affecting transient responses. The proposed strategy shows over 95% accuracy in the recognition experiments of three gaseous alkanes and six liquors. Results demonstrate that the MOSS strategy can accurately and easily recognize odors with a limited sensor number. The proposed strategy has potential applications in various odor recognition scenarios, such as medical diagnosis, food quality assessment, and environmental surveillance.

Handheld Crop Pest Sensor Using Binary Catalyst-Loaded Nano-SnO2 Particles for Oxidative Signal Amplification

In agriculture, pest management is a major challenge. Crop releases volatiles in response to the pest; hence, sensing these volatile signals at a very early stage will ease pest management. Here, binary catalyst-loaded SnO2 nanoparticles of <5 nm were synthesized for the repeated capture and oxidation of the signature volatile and its products to amplify the chemoresistive signal to detect concentrations as low as ≈120 ppb. The sensitivity may be due to the presence of the elements in the Sn-Fe-Pt bond evidenced by extended X-ray absorption fine-structure spectroscopy (EXAFS) that captures and oxidize the volatile without escaping. This strong catalyst may oxidize nontarget volatiles and can cause false signals; hence, a molecular sieve filter has been coupled to ensure high selectivity for the detection ofTuta absolutainfestation in tomato. Finally, with the support of a mobile power bank, the optimized sensor has been assembled into a lightweight handheld device.

Examination of electronically mismatched Diels-Alder reaction by on-line mass spectrometry

RATIONALE

Electronically mismatched Diels-Alder reactions have gained much attention as an alternative pathway for C-C bond formation. To facilitate the development of facile organic transformations, mechanistic investigations are required. Spectroscopic methods (NMR, electron paramagnetic resonance and UV-visible) are normally adopted for mechanistic examinations, but further improvements in directly obtaining structural information of short-lived intermediates are encouraged. Herein, an electronically mismatched Diels-Alder reaction between indole and 1,3-cyclohexadiene was studied using in situ electrospray ionization mass spectrometry (in situ ESI-MS). Based on direct sampling and detection of the in situ ESI-MS without sample pretreatment, the structures and dynamics of important intermediates were examined on-line.

METHODS

A syringe-based photocatalytic reactor and in situ ambient MS (AMS) evaluation system was constructed for mechanism studies. The role of oxygen was confirmed via control reaction employed in the N₂ -bubbled system. The stepwise cation radical-based pathway and the [2 + 2] cycloaddition process were determined through a series of experiments, including solvent evaluation, MS/MS experiments and dynamic monitoring.

RESULTS

The dependence of the reaction on solvent polarity demonstrated that the reaction occurs via the formation of cation radicals, which were captured, identified and dynamically monitored via in situ ESI-MS. Without pre-separation, the intermediate of [2 + 2] cycloaddition was identified and the cycloaddition process was thereby determined to be the combination of [4 + 2] cycloaddition and [2 + 2] cycloaddition. In addition, oxygen was proved to act as an electron mediator for both catalyst Ru(bpz)₃ (PF₆ )₂ and radical cations.

CONCLUSIONS

The mechanism of an electronically mismatched Diels-Alder reaction was successfully deduced by in situ MS associated with a syringe-based photocatalytic reactor. The structures and dynamics of cation radicals, the effect of O₂ for the reaction and the detailed process of [2 + 2] cycloaddition have been well demonstrated. This work could not only promote the understanding and development of facile photocatalytic transformations, but also enlarge the application range of AMS in on-line monitoring.

OH radical-initiated single-electron transfer for accelerated degradation via carbocation intermediates

Single electron transfer (SET) has made great contributions to a broad range of chemical processes, whose radical cation and carbocation intermediates are important for mechanism studies. Herein, hydroxyl radical (˙OH)-initiated SET was revealed in accelerated degradations, via the online examination of radical cations and carbocations by electrosonic spray ionization mass spectrometry (ESSI-MS). In the green and efficient non-thermal plasma catalysis system (MnO₂-plasma), hydroxychloroquine was efficiently degraded upon SET via carbocations. In the plasma field full of active oxygen species, ˙OH was generated on the MnO₂ surface to initiate SET-based degradations. Furthermore, theoretical calculations revealed that ˙OH preferred to withdraw the electron from the N atom that was conjugated to the benzene ring. This facilitated the generation of radical cations through SET, which was followed by the sequential formation of two carbocations for accelerated degradations. Transition states and energy barriers were calculated to study the formation of radical cations and subsequent carbocation intermediates. This work demonstrates an ˙OH-initiated SET for accelerated degradation via carbocations, providing a deeper understanding and the potential for the wider application of SET in green degradations.

Plasma-based ambient mass spectrometry: Recent progress and applications

Ambient mass spectrometry (AMS) has grown as a group of advanced analytical techniques that allow for the direct sampling and ionization of the analytes in different statuses from their native environment without or with minimum sample pretreatments. As a significant category of AMS, plasma-based AMS has gained a lot of attention due to its features that allow rapid, real-time, high-throughput, in vivo, and in situ analysis in various fields, including bioanalysis, pharmaceuticals, forensics, food safety, and mass spectrometry imaging. Tens of new methods have been developed since the introduction of the first plasma-based AMS technique direct analysis in real-time. This review first provides a comprehensive overview of the established plasma-based AMS techniques from their ion source configurations, mechanisms, and developments. Then, the progress of the representative applications in various scientific fields in the past 4 years (January 2017 to January 2021) has been summarized. Finally, we discuss the current challenges and propose the future directions of plasma-based AMS from our perspective.

A metal-organic framework loaded paper-based chemiluminescence sensor for trace acetone detection in exhaled breath

Trace acetone determination in breath can be regarded as a noninvasive method for diagnosis of diabetes. Here, a paper-based CL gas sensor combined with UiO-66 as the preconcentrator was established for sensitive detection of trace acetone in exhaled breath. UiO-66 with excellent adsorption performance and unique water stability was used for the adsorption and enrichment of acetone gas under high humidity conditions in exhaled breath. As acetone can remarkably increase the chemiluminescence (CL) of the 2,4-dinitrophenylhydrazine (DNPH)-potassium permanganate (KMnO₄) system, a sensitive CL device based on a paper substrate for trace acetone detection was established and the detection limit was 0.03 ppm. The fabricated method was used to assess the content of trace acetone in exhaled breath with satisfactory recoveries of 90-110%. It is expected to realize the noninvasive determination of acetone for diabetic patients in exhaled breath.

Cataluminescence System Coupled with Vacuum Desorption-Sampling Methodology for Real-Time Ozone Sensing during the Self-Decomposition Process on Functional Boron Nitride

The treatment and detection of ozone have been widely studied in recent decades with respect to toxicity and contamination, while the measurement method of ozone is relatively toneless. Fortunately, a new concept of the cataluminescence (CTL) sensor provides a scheme of real-time ozone sensing in a tiny system. Here, a novel CTL sensor system was specially developed with silica-hydroxyl functional boron nitride as the sensing material for rapid and sensitive ozone detection. Coupled with the construction of a pulse vacuum static sampling system, ozone on the surface of sensing material can be desorbed rapidly and can step into the next detection circulation in a few seconds. Based on the strong emission initiated by the transient of reactive oxygen species (ROS) including singlet oxygen, a trioxide group, and an oxygen radical, the detection limit of ozone could be optimized to be as low as 51.2 ppb. Besides, the sensor system exhibited remarkable anti-interference performance in which humidity changes and common VOCs do not disturb or weakly disturb ozone sensing, and the CTL mechanism of the multistep degradation process was further discussed on the basis of multiple pieces of experimental evidence and a DFT transient calculation. A real-time degradation-sensing module was further attached to the system to realize the functions of ozone decomposition and real-time monitoring.

Efficient Photoinduced Thermocatalytic Chemiluminescence System Based on the Z-Scheme Heterojunction Ag3PO4/Ag/Bi4Ti3O12 for H2S Sensing

Cataluminescence as a highly efficient gas transduction principle has attracted wide attention among research in environmental monitoring and clinical diagnosis with increasing awareness of human safety. Nowadays, the development of innovation sensing systems and the construction of the sensing mechanism to improve the analytical performance of compounds remain a major challenge. Herein, we construct an advanced photoinduced thermocatalytic chemiluminescence (PI-TC-CL) gas-sensing system via the introduction of a Z-scheme heterojunction Ag₃PO₄/Ag/Bi₄Ti₃O₁₂ to achieve higher efficient detection of H₂S. The unique electron transport path of the Z-scheme heterojunction and the LSPR effect of Ag nanoparticles fascinate the generation of the photoinduced electron-hole pair on the surface of catalysts when stimulated by LED lamps and slow down the recombination of electron-hole pairs under thermal conditions. Thus, based on the cooperative effect of the Z-scheme heterojunction AgPO/Ag/BTO and PI-TC-CL system, we have successfully established an efficient H₂S CTL detection system, which has a response three times higher than that on the traditional CTL system and even 45 times higher than that on BTO and ranges among the best of the state-of-the-art CTL performance in H₂S detection with the linear range of 0.095-8.87 μg mL^-1 and a limit of detection of 0.0065 μg mL^-1. Besides, to explore the gas-sensing mechanism, the synergetic effects of photoinduction and thermal catalysis are investigated thoroughly via conductivity and electrochemical experiments. This research provides a new perspective of engineering highly efficient catalysts and ingenious sensor systems through designing the nanostructure of materials and synergism catalytic mechanism.

Wireless Volatile Organic Compound Detection for Restricted Internet of Things Environments Based on Cataluminescence Sensors

Cataluminescence-based sensors do not require external light sources and complex circuitry, which enables them to avoid light scattering with high sensitivity, selectivity, and widely linear range. In this study, a wireless sensor system based on hierarchical CuO microspheres assembled from nano-sheets was constructed for Volatile Organic Compound (VOC) online detection. Through sensor characteristics and data process analysis, the results showed that the luminous sensor system has good luminous characteristics, including the intensity of visible light, high signal/noise (S/N) values, and very short response and recovery times. Different VOC concentration values can be detected on multiple wavelength channels and different Cataluminescence signal spectra separations can process multiple sets of Cataluminescence data combinations concurrently. This study also briefly studied the mechanism action of the Cataluminescence sensor, which can specifically be used for VOC detecting.

Thermal desorption bridged the gap between dielectric barrier discharge ionization and dried plasma spot samples for sensitive and rapid detection of fentanyl analogs in mass spectrometry

Guided by finite element simulations and 3D-printing, we constructed a semi-covered flat-TD surface for sufficient thermal desorption and ionization of fentanyl analogs from dried plasma/blood spot samples.

CHEMICAL REACTION MONITORING BY AMBIENT MASS SPECTROMETRY

Chemical reactions conducted in different media (liquid phase, gas phase, or surface) drive developments of versatile techniques for the detection of intermediates and prediction of reasonable reaction pathways. Without sample pretreatment, ambient mass spectrometry (AMS) has been applied to obtain structural information of reactive molecules that differ in polarity and molecular weight. Commercial ion sources (e.g., electrospray ionization, atmospheric pressure chemical ionization, and direct analysis in real-time) have been reported to monitor substrates and products by offline reaction examination. While the interception or characterization of reactive intermediates with short lifetime are still limited by the offline modes. Notably, online ionization technologies, with high tolerance to salt, buffer, and pH, can achieve direct sampling and ionization of on-going reactions conducted in different media (e.g., liquid phase, gas phase, or surface). Therefore, short-lived intermediates could be captured at unprecedented timescales, and the reaction dynamics could be studied for mechanism examinations without sample pretreatments. In this review, via various AMS methods, chemical reaction monitoring and mechanism elucidation for different classifications of reactions have been reviewed. The developments and advances of common ionization methods for offline reaction monitoring will also be highlighted.

Multifunctional MgO/HKUST-1 Composite for Capture, Catalysis, and Cyclic Cataluminescence Detection of Esters All-In-One to Rapidly Identify Scented Products

The integration of metallic oxide and metal-organic frameworks has attracted considerable attention as obtained composite materials because they show synergistic effects in applications of catalysis and sensing. Herein, we developed the hybrid MgO and HKUST-1 for efficient capture, catalysis, and cyclic cataluminescence (CCTL) detection of esters all-in-one to rapidly identify scented products. The multifunctional MgO/HKUST-1 composite with high CCTL activity was synthesized and characterized. The multifunctional MgO/HKUST-1 composite acts as an enrichment material for ester capture and serves as a catalyst, assisting the analyte to trigger multistage signals. The multistage signals of ester-containing scented products also satisfy the exponential decay equation with a certain τ-value. The τ-values obtained by the CCTL system were applied to identify the brands of essential oils. The working temperature served as the sensor element to obtain various τ-values. The τ-values constituted a digital code to label the different brands of cigarettes with the same aroma type. The multistage signals could be used to distinguish the origin regions of essential oils and tobacco. This work combines the CCTL strategy with the sample pretreatment, opening up a new direction to develop CCL and providing a new platform to rapidly identify ester-containing scented products.

Portable Smartphone Platform Based on a Single Dual-Emissive Ratiometric Fluorescent Probe for Visual Detection of Isopropanol in Exhaled Breath

The components in the exhaled breath have been confirmed to be related to certain diseases, especially studies have shown that isopropanol (IPA) might be closely associated with illnesses such as lung cancer, and are considered as a biomarker. Herein, we designed a portable smartphone platform based on a chemically synthesized ratiometric fluorescent probe for real-time/on-site, sensitive, and quantitative visual detection of IPA in exhaled breath. The fluorescent probe was fabricated by a nicotinamide adenine dinucleotide (NAD⁺) functional modified onto fluorescent internal standard red carbon dots (RCDs). Whereas, IPA can convert NAD⁺ into reduced nicotinamide adenine dinucleotide (NADH) through an enzymatic reaction of secondary alcohol dehydrogenase (S-ADH). The electron transfer from IPA to NAD⁺ emitted a blue emission of NADH, which displayed consecutive color changes from red to light blue. Under optimum conditions, the fluorescent probe shows sensitive responses to IPA with a detection limit as low as 4.45 nM. Moreover, combined with the smartphone color recognizer application (APP), the ratio of fluorescence intensity response was recorded on a blue channel (B)/red channel (R), which has been employed for the visual quantitative determination of IPA with a detection limit of 8.34 nM and a recovery rate of 90.65-110.09% (RSD ≤ 4.83). The method reported here provides a convenient pathway for real-time/on-site and visual detection of IPA in exhaled air and is expected to extend the application of investigation of potential volatile biomarkers for preliminary monitoring and clinical diagnosis.

Cobalt doped nitrogenous porous carbon derived from covalent organic framework as cataluminescence catalyst for rapid determination of n-hexane in edible oil

In this work, a catalytic material of cobalt doped nitrogenous porous carbon (Co/NPC) was fabricated from covalent organic frameworks (COFs) and cobalt ion via directly carbonization. Attribute to the excellent selective catalytic performance towards n-hexane, Co/NPC was employed in cataluminescence (CTL) for rapid and sensitive determination of n-hexane. Moreover, the detection conditions of CTL were evaluated, including temperature, flow rate and detecting wavelength. Under optimized conditions, a good linear relation between signal intensity of CTL and n-hexane concentration was obtained in the linear range of 0.4-250.0 mg/L and the limit of detection (LOD, S/N = 3) was 0.13 mg/L. Furthermore, the Co/NPC based CTL sensor was successfully applied to the determination of n-hexane in edible oil samples with the recoveries in the range of 92.0%-104.0%. The method comparison results of GC/MS and CTL on real sample analysis further proved the accuracy of the developed Co/NPC based CTL method. Additionally, the possible catalytic mechanism of n-hexane on the surface of Co/NPC was investigated, assisting by GC/MS on intermediation products identification. Overall, the Co/NPC based CTL sensor has been confirmed excellent performance in the n-hexane determination, which revealing extensive application in rapid residual n-hexane analysis in edible oil.

Ozone-Activated Cataluminescence Sensor System for Dichloroalkanes Based on Silica Nanospheres

The detection and monitoring of dichloroalkanes, which are typical chlorinated volatile organic compounds (CVOCs) with obvious biological toxicity, is of significance for environmental pollution and public health. Herein, a novel ozone-activated cataluminescence (CTL) sensor system based on silica nanospheres was developed for highly sensitive and fast quantification of dichloroalkanes. A typical CTL system coupled with a plasma-ozone-assist unit was designed for promoting the CTL response of dichloroalkanes. The ozone generated by plasma provides a new pathway of catalytic oxidation process, which accompanied by the CTL signal amplification of dichloroalkanes results in an enhanced CTL sensor system with improved limit of detection (1,2-dichloroethane: 0.04 μg mL^-1, 1,2-dichloropropane: 0.03 μg mL^-1) and benign selective performance under the interference of CO₂, H₂O, NO, NO₂, SO₂, CS₂, and other common CVOCs. Moreover, a segmented CTL mechanism including co-adsorption of ozone and dichloroalkanes, thermal elimination, the ozonation route, and a luminous step was ratiocinated based on multiple characterizations and discussion. The proposed methodology and theory open up an attractive perspective for the analysis of less active volatile organic compounds.

Novel Diethyl Ether Gas Sensor Based on Cataluminescence on Nano-Pd/ZnNi3Al2O7

A sensitive diethyl ether gas sensor based on cataluminescence on nano-Pd/ZnNi3Al2O7 at a temperature lower than 150 °C was reported. The composition of the sensitive material was determined by energy-dispersive spectrometry, and a particle size of less than 50 nm was shown by transmission electron microscopy. When the atomic percentage of Pd in the sensing material is 0.8-1.3%, it is beneficial to the low-temperature and high-selective cataluminescence of diethyl ether. The signal response and recovery of diethyl ether on the sensitive material can be completed quickly in 0.5 s, and the relative standard deviation of the signal within 500 h of continuous operation is not more than 2.5%. There is good linear relationship between the luminescence intensity and the concentration of diethyl ether in the range of 0.08-75 mg/m3. The detection limit (3σ) is 0.04 mg/m3. The working conditions optimized by the response surface methodology were an analytical wavelength of 548.86 nm, a reaction temperature of 109.18 °C, and a carrier gas velocity of 125.88 mL/min. The sensitivity of the method can be increased by 4.5% under the optimized working conditions. The optimization method is universal for many multi-parameter processes.

Uncatalyzed N-Alkylation of Amines in Ionic Wind from Ambient Corona Discharge

Ionic wind comprising of the drag of bulk air in the presence of electrical discharge enabled N-alkylation reactions under ambient conditions. By introducing reactant vapor as part of the discharge gas during the stages of electron acceleration, both neutral and charged species of the selected organic reactant gain energy through ion-neutral collisions, which is identified to facilitate chemical reactions. By performing this experiment in front of a mass spectrometer, chemical reactions occurring in the ionic wind were examined in real time. Reaction energetics were characterized via the use of benzylamine, which freely dissociates at a critical energy of 3.6 eV to give the resonance-stabilized benzyl cation as reaction intermediate. Benzylamine and many other primary amines were observed to undergo N-alkylation reactions by engaging in self-cross-coupling ion-molecule reactions. Because of the high energies of species involved and the fact that the ionic wind is generated at atmospheric pressure, it was straightforward to collect the ensuing reaction products without the use of complicated instrumentation. Water served as an effective collecting solvent allowing >0.1 mg of intact N-alkylated products to be collected under ambient conditions using a single plasma emitter. A novel N-alkylation reaction pathway involving the synthesis of N-benzyl-1-(methyleneamino)-1-phenylmethanaime was discovered through this offline product collection experiment, providing new insight into benzylamine dissociation in the ionic wind.

Investigation of Acetone Vapour Sensing Properties of a Ternary Composite of Doped Polyaniline, Reduced Graphene Oxide and Chitosan Using Surface Plasmon Resonance Biosensor

This work reports the use of a ternary composite that integrates p-Toluene sulfonic acid doped polyaniline (PANI), chitosan, and reduced graphene oxide (RGO) as the active sensing layer of a surface plasmon resonance (SPR) sensor. The SPR sensor is intended for application in the non-invasive monitoring and screening of diabetes through the detection of low concentrations of acetone vapour of less than or equal to 5 ppm, which falls within the range of breath acetone concentration in diabetic patients. The ternary composite film was spin-coated on a 50-nm-thick gold layer at 6000 rpm for 30 s. The structure, morphology and chemical composition of the ternary composite samples were characterized by FTIR, UV-VIS, FESEM, EDX, AFM, XPS, and TGA and the response to acetone vapour at different concentrations in the range of 0.5 ppm to 5 ppm was measured at room temperature using SPR technique. The ternary composite-based SPR sensor showed good sensitivity and linearity towards acetone vapour in the range considered. It was determined that the sensor could detect acetone vapour down to 0.88 ppb with a sensitivity of 0.69 degree/ppm with a linearity correlation coefficient of 0.997 in the average SPR angular shift as a function of the acetone vapour concentration in air. The selectivity, repeatability, reversibility, and stability of the sensor were also studied. The acetone response was 87%, 94%, and 99% higher compared to common interfering volatile organic compounds such as propanol, methanol, and ethanol, respectively. The attained lowest detection limit (LOD) of 0.88 ppb confirms the potential for the utilisation of the sensor in the non-invasive monitoring and screening of diabetes.

Tracing and elucidating visible-light mediated oxidation and C-H functionalization of amines using mass spectrometry

The co-existing mechanism of visible light mediated direct oxidation and C-H functionalization of amines was investigated by capturing all the intermediates using online mass spectrometry. The two-step dehydrogenation of amine involving a proton coupled electron transfer (PCET) process was revealed for the first time.