In Situ Selective Measurement Based on Diffusive Gradients in Thin Films Technique with Mercapto-Functionalized Mesoporous Silica for High-Resolution Imaging of SbIII in Soil

Detecting antimony(III) on-site using novel gel-based techniques: Colorimetric diffusive equilibrium in thin films for two-dimensional imaging and surface-enhanced Raman scattering for sensitive quantification

Antimony (Sb) pollution has raised increasing public concerns and its rapid on-site screening is central for the risk assessment. Herein, we proposed two gel-based methods based on colorimetric diffusive equilibrium in thin films (DET) and surface-enhanced Raman scattering (SERS), for two-dimensional imaging and sensitive detection of Sb(III) by revisiting the phenylfluorone (PhF) complexation reaction. PhF was well dispersed in the polyvinyl alcohol (PVA) hydrogel and reacted with Sb(III) in the DET gel to form a strong PhF-Sb(III) complex. The distribution of Sb(III) was easily visualized at a submillimeter resolution using computer imaging densitometry, with a detection limit (LOD) of ∼100 nmol L-1. Field application in the Sb mine area reveals limited dissolved Sb(III) penetrating the redox barrier below the sediment-water interface by 20 mm in rivers and tailing pond sediments. To improve the detection sensitivity and apply the principle to trace Sb quantification, a SERS platform was established by anchoring PhF on the hydrogel-stabilized Ag nanoparticles via C-O-Ag bonding to specifically detect Raman-inactive Sb(III). Benefiting from the high SERS activity of PhF and enrichment ability of hydrogel, Sb(III) was quantified with a LOD of 1.2-10.7 nmol L-1 depending on the sample volume. The coexisting ions at a 100-fold higher concentration than Sb(III) resulted in only 3.3-10.4 % variation in SERS intensity, indicating a negligible interference on the SERS platform. The platform exhibited a RSD of 6.6-13.1 % and acceptable recoveries for various environmental matrices, highlighting its promise in on-site application.

A SERS Responsive DGT Sensing Device for On-Site Determination of Organic Contaminants Underwater

Although diffusion gradient in the thin-film technique (DGT) is highly regarded in environmental analysis, the traditional DGT devices cannot serve as sensing devices but in situ sampling devices. Here we report a surface enhanced Raman scattering (SERS) responsive DGT sensing device (SERS-DGT Sensor) capable of on-site determination of organic contaminants underwater. This is achieved by innovatively utilizing a SERS responsive liquid suspension of Au nanoparticles supported on graphene oxide (AuNPs@GO) as the DGT binding phase. Liquid suspension is synthesized via a combined secondary growth and molecular welding approach and used as DGT binding phase AuNPs@GO exhibit good SERS activity, aqueous stability, and adsorption performance. Based on the development time range of 24-144 h, the measurement of sulfadiazine (SMT) by SERS-DGT Sensor is evaluated in the concentration range of 0.3289-2631 ng mL-1. The SERS-DGT sampler is valid for measuring SMT under a wide range of environmental conditions (i.e, pH 5-9, ionic strength 0.0001-0.05 mol L-1 NaCl, DOM concentrations 0-100 mg L-1, the values of TC: SMT ≤ 20 and MNZ: SMT ≤ 20). SERS-DGT Sensor is applied to the practical test of SMT content in pig breeding wastewater, and compared with the grab sampling method, the results confirm that this novel hyphenated technique exhibits good accuracy and precision. The platform proves to be versatile by extending the method to the monitoring of rhodamine 6G, metronidazole, fluoxetine, and enrofloxacin. In this article, SERS-DGT Sensor, a platform for directly on-site sensing of organic DGT, holds great potential for in situ sampling and on-site sensing for a wide range of organics and provides a new idea for environmental monitoring.

Determination of the Isotopic Composition of Aqueous Mercury in a Paddy Ecosystem Using Diffusive Gradients in Thin Films

Measuring the isotopic composition of Hg in natural waters is challenging due to the ultratrace level of aqueous Hg (ng L-1). At least 5 ng of Hg mass is required for Hg isotopic analysis. Given the low Hg concentration in natural waters, a large volume of water (>10 L) is typically needed. The conventional grab sampling method is time-consuming, laborious, and prone to contamination during transportation and preconcentration steps. In this study, a DGT (diffusive gradients in thin films) method based on aminopropyl and mercaptopropyl bi-functionalized SBA-15 nanoparticles was developed and extended to determine the concentration and isotopic composition of aqueous Hg for the first time. The results of laboratory analysis showed that Hg adsorption by DGT induces ∼ -0.2‰ mass-dependent fractionation (MDF) and little mass-independent fractionation (MIF). The magnitude of MDF exhibits a dependence on the diffusion-layer thickness of DGT. Since Hg-MDF can occur in a broad range of environmental processes, monitoring the δ202Hg of aqueous Hg using the DGT method should be performed with caution. Field results show consistent MIF signatures (Δ199Hg) between the DGT and conventional grab sampling method. The developed DGT method serves as a passive sampling method that effectively characterizes the MIF of Hg in waters to understand the biogeochemical cycle of Hg at contaminated sites.

Selective and simultaneous high resolution 2-D imaging of AsIII, CrIII and SbIII and dissolved oxygen by developing a new DGT technique comprising a hybrid sensor

A new diffusive gradients in thin films technique (HR-MPTS DGT) with mercapto-functionalized attapulgite in a binding gel was developed for simultaneous two-dimensional (2-D) chemical imaging of As^III, Cr^III and Sb^III selectively at the submillimeter scale, combined with laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) analysis. The HR-MPTS DGT exhibited selective accumulation of As^III, Sb^III and Cr^III (> 97%), yet negligible accumulation of As^V, Sb^V and Cr^VI (< 2%). Accumulation of As^III, Cr^III and Sb^III on the binding gel had a linear relationship (R² > 0.99) with the corresponding standardized laser ablation signals, proving the feasibility of LA-ICP-MS analysis. Analysis for As^III, Cr^III and Sb^III was provided with favorable analytical precision (relative standard deviation <10%). With the purpose of evaluating the dynamics of As^III, Cr^III, Sb^III and O₂ in the rooting zone, a hybrid sensor, which comprises the HR-MPTS gel overlying an O₂ planar optode, was deployed in rhizosphere sediments. Results showed that the consumption of both As^III and Sb^III due to the oxidation extended ~4.48 mm into the sediments, which was consistent with the extension length of the oxidized sediment layers around the roots created by O₂ leakage.

Validation and Assessment of Diffusive Gradients in Thin-Films (DGT) Technique for Measuring Nutrients in Taihu Lake Water with Algae Bloom

DGT (diffusive gradients in thin films) technique has been developed for measuring nitrogen in freshwaters and applied to assess the bioavailability of phosphorus in soils/sediments. These two elements are the main nutrients causing algae bloom, but DGT has never been used in the field water conditions with algae bloom. In our study, a pair of DGT devices were used in comparison with grab sampling to characterize the performance of this technique to measure labile NO₃-N, NH₄-N, and PO₄-P concentrations in algae-cultivated Taihu Lake water. The results showed that DGT measurement was highly affected by algae bloom and the environmental conditions using the current assemblies, especially for NH₄-N measurement. For in situ measurement of nutrients in the real environment, an improvement to the DGT technique is required. The comprehensive assessment of the level of eutrophication needs to consider a variety of environmental factors rather than just the concentration of nutrients.

A Novel In Situ Method for Simultaneously and Selectively Measuring AsIII, SbIII, and SeIV in Freshwater and Soils

Anthropogenic and climatic perturbations redistribute arsenic (As), antimony (Sb), and selenium (Se) within the environment. The speciation characteristics of these elements determine their behavior and biogeochemical cycling, but these redox-sensitive species are challenging to capture, with few methods able to harmonize measurements across the whole plant-soil-ecosystem continuum. In this study, we developed a novel diffusive gradient in thin films (DGT) method based on aminopropyl and mercaptopropyl bi-functionalized mesoporous silica spheres (AMBS) to achieve in-situ, simultaneous, and selective quantification of As^III, Sb^III, and Se^IV, three typical/toxic but difficult to measure inorganic species. When used for environmental monitoring within a river catchment, AMBS-DGT exhibited stable/accurate predictions of these species despite varying water chemistries (ionic strength 0.01-200 mmol L^-1 NO₃^-, pH 5-9 for As^III and Sb^III, and pH 5-7.5 for Se^IV). Furthermore, river deployments also showed that time-averaged species concentrations by AMBS-DGT were reproducible compared with high-frequency sampling and measurement by high performance liquid chromatography coupled with inductively coupled plasma mass spectroscopy. When AMBS-DGT was used for sub-mm scale chemical imaging of soil solute fluxes, the method resolved concomitant redox-constrained spatial patterns of As^III, Sb^III, and Se^IV associated with root O₂ penetration within anaerobic soil. Improved capabilities for measurement of compartment interfaces and microniche features are critical alongside the measurement of larger-scale hydrological processes that dictate the fine-scale effects, with the AMBS-DGT achieving this for As^III, Sb^III, and Se^IV.

Tetrafluoroterephthalonitrile-crosslinked β-cyclodextrin polymer as a binding agent of diffusive gradients in thin-films for sampling endocrine disrupting chemicals in water

β-Cyclodextrin (β-CD) is an inexpensive and reproducible material derived from corn starch. It is possible that tetrafluoroterephthalonitrile-crosslinked β-cyclodextrin polymer (TFN-CD), a cheap but efficient adsorbent, could be a suitable binding agent for use in the passive sampling technique, diffusive gradients in thin-films (DGT). Herein, the TFN-CD binding gel was prepared and then evaluated as the binding phase of DGT to sample six endocrine disrupting chemicals (EDCs) in water. The TFN-CD dispersed uniformly in the binding gel due to its hydrophilicity. The quantitative recoveries (99.3%-106%) of EDCs from the TFN-CD binding gel could be conveniently achieved by ultrasonic extraction using 5 mL methanol for 10 min. Compared with the excellent HLB (hydrophilic-lipophilic-balanced resin) binding gel, the TFN-CD binding gel had comparable or even faster adsorption kinetics, although the equilibrium adsorption capacity was slightly lower. The effective adsorption capacities of TFN-CD-based DGT (TFN-CD-DGT) were roughly estimated to enable a 7-days deployment in EDC solution of 25.7-30.0 μg L^-1. Studies of influencing factors showed that the ionic strength (0-0.5 M), pH (3.73-9.13), dissolved organic matter (0-20 mg L^-1) and long-term storage (204 days) had negligible influence on the performance of TFN-CD-DGT. Finally, the TFN-CD-DGT was successfully used to record sudden increases in bulk concentrations during simulated discharge events in pond water. These results demonstrate that TFN-CD is a suitable binding agent for sampling of EDCs, and the low cost of TFN-CD could be conducive to the application of DGT in large-scale sampling.

Rice Rhizospheric Effects on the Bioavailability of Toxic Trace Elements during Land Application of Biochar

Land application of biochar, the product of organic waste carbonization, can improve soil fertility as well as sequester carbon to mitigate climate change. In addition, biochar can greatly influence the bioavailability of toxic trace elements (TTEs) in soils resulting from its large internal surface areas, abundance in organic carbon, and ability to modify soil pH. Most research to date employs batch leaching tests to predict how biochar addition impacts TTE bioavailability, but these ex situ tests rarely considered the rhizospheric effect which might offset or intensify the changes induced by organic residue addition. This is especially so in rice rhizospheres because of strong clines in localized redox conditions. In this study, we adopted in situ high-resolution (HR) diffusive gradients in thin films (DGT) as well as rhizo-bag porewater sampling experiments to depict an overall picture of the difference in TTE (As, Cd, Cu, Ni, and Pb) bioavailability between the rice rhizosphere and bulk soils during land application of biochar. Porewater sampling experiments revealed that biochar additions stimulated TTE release due to the increase of dissolved organic carbon (DOC) and H⁺ concentrations. In the rhizosphere, although biochar still promoted As, Cd, and Ni release into porewaters, the rhizospheric effect was one of dampening/reduction compared with the bulk soil. When we focused on the localized changes of TTE bioavailability in the rhizosphere using an in situ HR-DGT approach, on the contrary, flux maxima of Cd, Cu, and Ni occurred near/on the root surface, and hot spots of As can be observed at peripheries of the rooting zone, which demonstrated the high heterogeneity and complexity of the rhizosphere's influence on TTE bioavailability.

Functionalized Mesoporous Silicon Nanomaterials in Inorganic Soil Pollution Research: Opportunities for Soil Protection and Advanced Chemical Imaging

"Innovative actions towards a pollution free-planet" is a goal of the United Nations Environment Assembly (UNEA). Aided by both the Food and Agricultural Organisation (FAO) and its Global Soil Partnership under the 3rd UNEA resolution, a consensus from > 170 countries have agreed a need for accelerated action and collaboration to combat soil pollution. This initiative has been tasked to find new and improved solutions to prevent and reduce soil pollution, and it is in this context that this review provides an updated perspective on an emerging technology platform that has already provided demonstrable utility for measurement, mapping, and monitoring of toxic trace elements (TTEs) in soils, in addition to the entrapment, removal, and remediation of pollutant sources. In this article, the development and characteristics of functionalized mesoporous silica nanomaterials (FMSN) will be discussed and compared with other common metal scavenging materials. The chemistries of the common functionalizations will be reviewed, in addition to providing an outlook on some of the future directions/applications of FMSN. The use of FMSN in soil will be considered with some specific case studies focusing on Hg and As. Finally, the advantages and developments of FMSN in the widely used diffusive gradients-in-thin films (DGT) technique will be discussed, in particular, its advantages as a DGT substrate for integration with oxygen planar optodes in multilayer systems that provide 2D mapping of metal pollutant fluxes at submillimeter resolution, which can be used to measure detailed sediment-water fluxes as well as soil-root interactions, to predict plant uptake and bioavailability.