DirectMS1: MS/MS-Free Identification of 1000 Proteins of Cellular Proteomes in 5 Minutes

The Future of Proteomics is Up in the Air: Can Ion Mobility Replace Liquid Chromatography for High Throughput Proteomics?

The coevolution of liquid chromatography (LC) with mass spectrometry (MS) has shaped contemporary proteomics. LC hyphenated to MS now enables quantification of more than 10,000 proteins in a single injection, a number that likely represents most proteins in specific human cells or tissues. Separations by ion mobility spectrometry (IMS) have recently emerged to complement LC and further improve the depth of proteomics. Given the theoretical advantages in speed and robustness of IMS in comparison to LC, we envision that ongoing improvements to IMS paired with MS may eventually make LC obsolete, especially when combined with targeted or simplified analyses, such as rapid clinical proteomics analysis of defined biomarker panels. In this perspective, we describe the need for faster analysis that might drive this transition, the current state of direct infusion proteomics, and discuss some technical challenges that must be overcome to fully complete the transition to entirely gas phase proteomics.

Uncovering Distinct Peptide Charging Behaviors in Electrospray Ionization Mass Spectrometry Using a Large-Scale Dataset

Electrospray ionization is a powerful and prevalent technique used to ionize analytes in mass spectrometry. The distribution of charges that an analyte receives (charge state distribution, CSD) is an important consideration for interpreting mass spectra. However, due to an incomplete understanding of the ionization mechanism, the analyte properties that influence CSDs are not fully understood. Here, we employ a machine learning-based approach and analyze CSDs of hundreds of thousands of peptides. Interestingly, half of the peptides exhibit charges that differ from what one would naively expect (the number of basic sites). We find that these peptides can be classified into two regimes (undercharging and overcharging) and that these two regimes display markedly different charging characteristics. Notably, peptides in the overcharging regime show minimal dependence on basic site count, and more generally, the two regimes exhibit distinct sequence determinants. These findings highlight the rich ionization behavior of peptides and the potential of CSDs for enhancing peptide identification.

Ultra-Fast Mass Spectrometry in Plant Biochemistry: Response of Winter Wheat Proteomics to Pre-Sowing Treatment with Iron Compounds

In recent years, ultrafast liquid chromatography/mass spectrometry methods have been extensively developed for the use in proteome profiling in biochemical studies. These methods are intended for express monitoring of cell response to biotic stimuli and elucidation of correlation of molecular changes with biological processes and phenotypical changes. New technologies, including the use of nanomaterials, are actively introduced to increase agricultural production. However, this requires complex approbation of new fertilizers and investigation of mechanisms underlying the biotic effects on the germination, growth, and development of plants. The aim of this work was to adapt the method of ultrafast chromatography/mass spectrometry for rapid quantitative profiling of molecular changes in 7-day-old wheat seedlings in response to pre-sowing seed treatment with iron compounds. The used method allows to analyze up to 200 samples per day; its practical value lies in the possibility of express proteomic diagnostics of the biotic action of new treatments, including those intended for agricultural needs. Changes in the regulation of photosynthesis, biosynthesis of chlorophyll and porphyrin- and tetrapyrrole-containing compounds, glycolysis (in shoot tissues), and polysaccharide metabolism (in root tissues) were shown after seed treatment with suspensions containing film-forming polymers (PEG 400, Na-CMC, Na2-EDTA), iron (II, III) nanoparticles, or iron (II) sulfate. Observations at the protein levels were consistent with the results of morphometry, superoxide dismutase activity assay, and microelement analysis of 3-day-old germinated seeds and shoots and roots of 7-day-old seedlings. A characteristic molecular signature involving proteins participating in the regulation of photosynthesis and glycolytic process was suggested as a potential marker of the biotic effects of seed treatment with iron compounds, which will be confirmed in further studies.

IQMMA: Efficient MS1 Intensity Extraction Pipeline Using Multiple Feature Detection Algorithms for DDA Proteomics

One of the key steps in data dependent acquisition (DDA) proteomics is detection of peptide isotopic clusters, also called "features", in MS1 spectra and matching them to MS/MS-based peptide identifications. A number of peptide feature detection tools became available in recent years, each relying on its own matching algorithm. Here, we provide an integrated solution, the intensity-based Quantitative Mix and Match Approach (IQMMA), which integrates a number of untargeted peptide feature detection algorithms and returns the most probable intensity values for the MS/MS-based identifications. IQMMA was tested using available proteomic data acquired for both well-characterized (ground truth) and real-world biological samples, including a mix of Yeast and E. coli digests spiked at different concentrations into the Human K562 digest used as a background, and a set of glioblastoma cell lines. Three open-source feature detection algorithms were integrated: Dinosaur, biosaur2, and OpenMS FeatureFinder. None of them was found optimal when applied individually to all the data sets employed in this work; however, their combined use in IQMMA improved efficiency of subsequent protein quantitation. The software implementing IQMMA is freely available at https://github.com/PostoenkoVI/IQMMA under Apache 2.0 license.

Potential of Negative-Ion-Mode Proteomics: An MS1-Only Approach

Current proteomics approaches rely almost exclusively on using the positive ionization mode, resulting in inefficient ionization of many acidic peptides. This study investigates protein identification efficiency in the negative ionization mode using the DirectMS1 method. DirectMS1 is an ultrafast data acquisition method based on accurate peptide mass measurements and predicted retention times. Our method achieves the highest rate of protein identification in the negative ion mode to date, identifying over 1000 proteins in a human cell line at a 1% false discovery rate. This is accomplished using a single-shot 10 min separation gradient, comparable to lengthy MS/MS-based analyses. Optimizing separation and experimental conditions was achieved by utilizing mobile buffers containing 2.5 mM imidazole and 3% isopropanol. The study emphasized the complementary nature of data obtained in positive and negative ion modes. Combining the results from all replicates in both polarities increased the number of identified proteins to 1774. Additionally, we analyzed the method's efficiency using different proteases for protein digestion. Among the four studied proteases (LysC, GluC, AspN, and trypsin), trypsin and LysC demonstrated the highest protein identification yield. This suggests that digestion procedures utilized in positive-mode proteomics can be effectively applied in the negative ion mode. Data are deposited to ProteomeXchange: PXD040583.

Label-free single cell proteomics utilizing ultrafast LC and MS instrumentation: A valuable complementary technique to multiplexing

The ability to map a proteomic fingerprint to transcriptomic data would master the understanding of how gene expression translates into actual phenotype. In contrast to nucleic acid sequencing, in vitro protein amplification is impossible and no single cell proteomic workflow has been established as gold standard yet. Advances in microfluidic sample preparation, multi-dimensional sample separation, sophisticated data acquisition strategies, and intelligent data analysis algorithms have resulted in major improvements to successfully analyze such tiny sample amounts with steadily boosted performance. However, among the broad variation of published approaches, it is commonly accepted that highest possible sensitivity, robustness, and throughput are still the most urgent needs for the field. While many labs have focused on multiplexing to achieve these goals, label-free SCP is a highly promising strategy as well whenever high dynamic range and unbiased accurate quantification are needed. We here focus on recent advances in label-free single-cell mass spectrometry workflows and try to guide our readers to choose the best method or combinations of methods for their specific applications. We further highlight which techniques are most propitious in the future and which applications but also limitations we foresee for the field.

A high-throughput approach reveals distinct peptide charging behaviors in electrospray ionization mass spectrometry

Electrospray ionization is a powerful and prevalent technique used to ionize analytes in mass spectrometry. The distribution of charges that an analyte receives (charge state distribution, CSD) is an important consideration for interpreting mass spectra. However, due to an incomplete understanding of the ionization mechanism, the analyte properties that influence CSDs are not fully understood. Here, we employ a machine learning-based high-throughput approach and analyze CSDs of hundreds of thousands of peptides. Interestingly, half of the peptides exhibit charges that differ from what one would naively expect (number of basic sites). We find that these peptides can be classified into two regimes-undercharging and overcharging-and that these two regimes display markedly different charging characteristics. Strikingly, peptides in the overcharging regime show minimal dependence on basic site count, and more generally, the two regimes exhibit distinct sequence determinants. These findings highlight the rich ionization behavior of peptides and the potential of CSDs for enhancing peptide identification.

Robust and Easy-to-Use One-Pot Workflow for Label-Free Single-Cell Proteomics

The analysis of ultralow input samples or even individual cells is essential to answering a multitude of biomedical questions, but current proteomic workflows are limited in their sensitivity and reproducibility. Here, we report a comprehensive workflow that includes improved strategies for all steps, from cell lysis to data analysis. Thanks to convenient-to-handle 1 μL sample volume and standardized 384-well plates, the workflow is easy for even novice users to implement. At the same time, it can be performed semi-automatized using CellenONE, which allows for the highest reproducibility. To achieve high throughput, ultrashort gradient lengths down to 5 min were tested using advanced μ-pillar columns. Data-dependent acquisition (DDA), wide-window acquisition (WWA), data-independent acquisition (DIA), and commonly used advanced data analysis algorithms were benchmarked. Using DDA, 1790 proteins covering a dynamic range of four orders of magnitude were identified in a single cell. Using DIA, proteome coverage increased to more than 2200 proteins identified from single-cell level input in a 20 min active gradient. The workflow enabled differentiation of two cell lines, demonstrating its suitability to cellular heterogeneity determination.

Proteomics-based scoring of cellular response to stimuli for improved characterization of signaling pathway activity

Omics technologies focus on uncovering the complex nature of molecular mechanisms in cells and organisms, including biomarkers and drug targets discovery. Aiming at these tasks, we see that information extracted from omics data is still underused. In particular, characteristics of differentially regulated molecules can be combined in a single score to quantify the signaling pathway activity. Such a metric can be useful for comprehensive data interpretation to follow: (1) developing molecular responses in time; (2) potency of a drug on a certain cell culture; (3) ranking the signaling pathway activity in stimulated cells; and (4) integration of the omics data and assay-based measurements of cell viability, cytotoxicity, and proliferation. With recent advances in ultrafast mass spectrometry for quantitative proteomics allowing data collection in a few minutes, proteomics score for cellular response to stimuli can become a fast, accurate, and informative complement to bioassays. Here, we utilized an interquartile-based selection of differentially regulated features and a variety of schemes for quantifying cellular responses to come up with the quantitative metric for total cellular response and pathway activity. Validation was performed using antiproliferative and virus assays and label-free proteomics data collected for cancer cells subjected to drug stimulation.

Recent advances in top-down proteome sample processing ahead of MS analysis

Top-down proteomics is emerging as a preferred approach to investigate biological systems, with objectives ranging from the detailed assessment of a single protein therapeutic, to the complete characterization of every possible protein including their modifications, which define the human proteoform. Given the controlling influence of protein modifications on their biological function, understanding how gene products manifest or respond to disease is most precisely achieved by characterization at the intact protein level. Top-down mass spectrometry (MS) analysis of proteins entails unique challenges associated with processing whole proteins while maintaining their integrity throughout the processes of extraction, enrichment, purification, and fractionation. Recent advances in each of these critical front-end preparation processes, including minimalistic workflows, have greatly expanded the capacity of MS for top-down proteome analysis. Acknowledging the many contributions in MS technology and sample processing, the present review aims to highlight the diverse strategies that have forged a pathway for top-down proteomics. We comprehensively discuss the evolution of front-end workflows that today facilitate optimal characterization of proteoform-driven biology, including a brief description of the clinical applications that have motivated these impactful contributions.

Blood Plasma Proteome: A Meta-Analysis of the Results of Protein Quantification in Human Blood by Targeted Mass Spectrometry

A meta-analysis of the results of targeted quantitative screening of human blood plasma was performed to generate a reference standard kit that can be used for health analytics. The panel included 53 of the 296 proteins that form a “stable” part of the proteome of a healthy individual; these proteins were found in at least 70% of samples and were characterized by an interindividual coefficient of variation <40%. The concentration range of the selected proteins was 10−10−10−3 M and enrichment analysis revealed their association with rare familial diseases. The concentration of ceruloplasmin was reduced by approximately three orders of magnitude in patients with neurological disorders compared to healthy volunteers, and those of gelsolin isoform 1 and complement factor H were abruptly reduced in patients with lung adenocarcinoma. Absolute quantitative data of the individual proteome of a healthy and diseased individual can be used as the basis for personalized medicine and health monitoring. Storage over time allows us to identify individual biomarkers in the molecular landscape and prevent pathological conditions.

Label-Free Quantification from Direct Infusion Shotgun Proteome Analysis (DISPA-LFQ) with CsoDIAq Software

Large-scale proteome analysis requires rapid and high-throughput analytical methods. We recently reported a new paradigm in proteome analysis where direct infusion and ion mobility are used instead of liquid chromatography (LC) to achieve rapid and high-throughput proteome analysis. Here, we introduce an improved direct infusion shotgun proteome analysis protocol including label-free quantification (DISPA-LFQ) using CsoDIAq software. With CsoDIAq analysis of DISPA data, we can now identify up to ∼2000 proteins from the HeLa and 293T proteomes, and with DISPA-LFQ, we can quantify ∼1000 proteins from no more than 1 μg of sample within minutes. The identified proteins are involved in numerous valuable pathways including central carbon metabolism, nucleic acid replication and transport, protein synthesis, and endocytosis. Together with a high-throughput sample preparation method in a 96-well plate, we further demonstrate the utility of this technology for performing high-throughput drug analysis in human 293T cells. The total time for data collection from a whole 96-well plate is approximately 8 h. We conclude that the DISPA-LFQ strategy presents a valuable tool for fast identification and quantification of proteins in complex mixtures, which will power a high-throughput proteomic era of drug screening, biomarker discovery, and clinical analysis.

On the Feasibility of Using an Ultra-Fast DirectMS1 Method of Proteome-Wide Analysis for Searching Drug Targets in Chemical Proteomics

Protein quantitation in tissue cells or physiological fluids based on liquid chromatography/mass spectrometry is one of the key sources of information on the mechanisms of cell functioning during chemotherapeutic treatment. Information on significant changes in protein expression upon treatment can be obtained by chemical proteomics and requires analysis of the cellular proteomes, as well as development of experimental and bioinformatic methods for identification of the drug targets. Low throughput of whole proteome analysis based on liquid chromatography and tandem mass spectrometry is one of the main factors limiting the scale of these studies. The method of direct mass spectrometric identification of proteins, DirectMS1, is one of the approaches developed in recent years allowing ultrafast proteome-wide analyses employing minute-scale gradients for separation of proteolytic mixtures. Aim of this work was evaluation of both possibilities and limitations of the method for identification of drug targets at the level of whole proteome and for revealing cellular processes activated by the treatment. Particularly, the available literature data on chemical proteomics obtained earlier for a large set of onco-pharmaceuticals using multiplex quantitative proteome profiling were analyzed. The results obtained were further compared with the proteome-wide data acquired by the DirectMS1 method using ultrashort separation gradients to evaluate efficiency of the method in identifying known drug targets. Using ovarian cancer cell line A2780 as an example, a whole-proteome comparison of two cell lysis techniques was performed, including the freeze-thaw lysis commonly employed in chemical proteomics and the one based on ultrasonication for cell disruption, which is the widely accepted as a standard in proteomic studies. Also, the proteome-wide profiling was performed using ultrafast DirectMS1 method for A2780 cell line treated with lonidamine, followed by gene ontology analyses to evaluate capabilities of the method in revealing regulation of proteins in the cellular processes associated with drug treatment.

Viral Biomarker Detection and Validation Using MALDI Mass Spectrometry Imaging (MSI)

(1) Background: MALDI imaging is a technique that still largely depends on time of flight (TOF)-based instrument such as the Bruker UltrafleXtreme. While capable of performing targeted MS/MS, these instruments are unable to perform fragmentation while imaging a tissue section necessitating the reliance of MS1 values for peptide level identifications. With this premise in mind, we have developed a hybrid bioinformatic/image-based method for the identification and validation of viral biomarkers. (2) Methods: Formalin-Fixed Paraffin-Embedded (FFPE) mouse samples were sectioned, mounted and prepared for mass spectrometry imaging using our well-established methods. Peptide identification was achieved by first extracting confident images corresponding to theoretical viral peptides. Next, those masses were used to perform a Peptide Mmass Fingerprint (PMF) searched against known viral FASTA sequences against a background mouse FASTA database. Finally, a correlational analysis was performed with imaging data to confirm pixel-by-pixel colocalization and intensity of viral peptides. (3) Results: 14 viral peptides were successfully identified with significant PMF Scores and a correlational result of >0.79 confirming the presence of the virus and distinguishing it from the background mouse proteins. (4) Conclusions: this novel approach leverages the power of mass spectrometry imaging and provides confident identifications for viral proteins without requiring MS/MS using simple MALDI Time Of Flight/Time Of Flight (TOF/TOF) instrumentation.

DirectMS1Quant: Ultrafast Quantitative Proteomics with MS/MS-Free Mass Spectrometry

Recently, we presented the DirectMS1 method of ultrafast proteome-wide analysis based on minute-long LC gradients and MS1-only mass spectra acquisition. Currently, the method provides the depth of human cell proteome coverage of 2500 proteins at a 1% false discovery rate (FDR) when using 5 min LC gradients and 7.3 min runtime in total. While the standard MS/MS approaches provide 4000-5000 protein identifications within a couple of hours of instrumentation time, we advocate here that the higher number of identified proteins does not always translate into better quantitation quality of the proteome analysis. To further elaborate on this issue, we performed a one-on-one comparison of quantitation results obtained using DirectMS1 with three popular MS/MS-based quantitation methods: label-free (LFQ) and tandem mass tag quantitation (TMT), both based on data-dependent acquisition (DDA) and data-independent acquisition (DIA). For comparison, we performed a series of proteome-wide analyses of well-characterized (ground truth) and biologically relevant samples, including a mix of UPS1 proteins spiked at different concentrations into an Echerichia coli digest used as a background and a set of glioblastoma cell lines. MS1-only data was analyzed using a novel quantitation workflow called DirectMS1Quant developed in this work. The results obtained in this study demonstrated comparable quantitation efficiency of 5 min DirectMS1 with both TMT and DIA methods, yet the latter two utilized a 10-20-fold longer instrumentation time.

MetaProClust-MS1: an MS1 Profiling Approach for Large-Scale Microbiome Screening

Metaproteomics is used to explore the functional dynamics of microbial communities. However, acquiring metaproteomic data by tandem mass spectrometry (MS/MS) is time-consuming and resource-intensive, and there is a demand for computational methods that can be used to reduce these resource requirements. We present MetaProClust-MS1, a computational framework for microbiome feature screening developed to prioritize samples for follow-up MS/MS. In this proof-of-concept study, we tested and compared MetaProClust-MS1 results on gut microbiome data, from fecal samples, acquired using short 15-min MS1-only chromatographic gradients and MS1 spectra from longer 60-min gradients to MS/MS-acquired data. We found that MetaProClust-MS1 identified robust gut microbiome responses caused by xenobiotics with significantly correlated cluster topologies of comparable data sets. We also used MetaProClust-MS1 to reanalyze data from both a clinical MS/MS diagnostic study of pediatric patients with inflammatory bowel disease and an experiment evaluating the therapeutic effects of a small molecule on the brain tissue of Alzheimer's disease mouse models. MetaProClust-MS1 clusters could distinguish between inflammatory bowel disease diagnoses (ulcerative colitis and Crohn's disease) using samples from mucosal luminal interface samples and identified hippocampal proteome shifts of Alzheimer's disease mouse models after small-molecule treatment. Therefore, we demonstrate that MetaProClust-MS1 can screen both microbiomes and single-species proteomes using only MS1 profiles, and our results suggest that this approach may be generalizable to any proteomics experiment. MetaProClust-MS1 may be especially useful for large-scale metaproteomic screening for the prioritization of samples for further metaproteomic characterization, using MS/MS, for instance, in addition to being a promising novel approach for clinical diagnostic screening. IMPORTANCE Growing evidence suggests that human gut microbiome composition and function are highly associated with health and disease. As such, high-throughput metaproteomic studies are becoming more common in gut microbiome research. However, using a conventional long liquid chromatography (LC)-MS/MS gradient metaproteomics approach as an initial screen in large-scale microbiome experiments can be slow and expensive. To combat this challenge, we introduce MetaProClust-MS1, a computational framework for microbiome screening using MS1-only profiles. In this proof-of-concept study, we show that MetaProClust-MS1 identifies clusters of gut microbiome treatments using MS1-only profiles similar to those identified using MS/MS. Our approach allows researchers to prioritize samples and treatments of interest for further metaproteomic analyses and may be generally applicable to any proteomic analysis. In particular, this approach may be especially useful for large-scale metaproteomic screening or in clinical settings where rapid diagnostic evidence is required.

Mass Spectrometry as a Crucial Analytical Basis for Omics Sciences

This review is devoted to the consideration of mass spectrometric platforms as applied to omics sciences. The most significant attention is paid to omics related to life sciences (genomics, proteomics, meta-bolomics, lipidomics, glycomics, plantomics, etc.). Mass spectrometric approaches to solving the problems of petroleomics, polymeromics, foodomics, humeomics, and exosomics, related to inorganic sciences, are also discussed. The review comparatively presents the advantages of various principles of separation and mass spectral techniques, complementary derivatization, used to obtain large arrays of various structural and quantitative information in the mentioned omics sciences.

Evaluation of an integrative Bayesian peptide detection approach on a combinatorial peptide library

Detection of peptides lies at the core of bottom-up proteomics analyses. We examined a Bayesian approach to peptide detection, integrating match-based models (fragments, retention time, isotopic distribution, and precursor mass) and peptide prior probability models under a unified probabilistic framework. To assess the relevance of these models and their various combinations, we employed a complete- and a tail-complete search of a low-precursor-mass synthetic peptide library based on oncogenic KRAS peptides. The fragment match was by far the most informative match-based model, while the retention time match was the only remaining such model with an appreciable impact--increasing correct detections by around 8 %. A peptide prior probability model built from a reference proteome greatly improved the detection over a uniform prior, essentially transforming de novo sequencing into a reference-guided search. The knowledge of a correct sequence tag in advance to peptide-spectrum matching had only a moderate impact on peptide detection unless the tag was long and of high certainty. The approach also derived more precise error rates on the analyzed combinatorial peptide library than those estimated using PeptideProphet and Percolator, showing its potential applicability for the detection of homologous peptides. Although the approach requires further computational developments for routine data analysis, it illustrates the value of peptide prior probabilities and presents a Bayesian approach for their incorporation into peptide detection.

Evaluation of the Sensitivity of Proteomics Methods Using the Absolute Copy Number of Proteins in a Single Cell as a Metric

Proteomic technology has improved at a staggering pace in recent years, with even practitioners challenged to keep up with new methods and hardware. The most common metric used for method performance is the number of peptides and proteins identified. While this metric may be helpful for proteomics researchers shopping for new hardware, this is often not the most biologically relevant metric. Biologists often utilize proteomics in the search for protein regulators that are of a lower relative copy number in the cell. In this review, I re-evaluate untargeted proteomics data using a simple graphical representation of the absolute copy number of proteins present in a single cancer cell as a metric. By comparing single-shot proteomics data to the coverage of the most in-depth proteomic analysis of that cell line acquired to date, we can obtain a rapid metric of method performance. Using a simple copy number metric allows visualization of how proteomics has developed in both sensitivity and overall dynamic range when using both relatively long and short acquisition times. To enable reanalysis beyond what is presented here, two available web applications have been developed for single- and multi-experiment comparisons with reference protein copy number data for multiple cell lines and organisms.

Improving the Protein Inference from Bottom-Up Proteomic Data Using Identifications from MS1 Spectra

Protein inference is one of the crucial steps in proteome characterization using a bottom-up approach. Multiple algorithms to solve the problem are focused on extensive analysis of shared peptides identified from fragmentation mass spectra (MS/MS). However, many protein homologues with a similar amino acid sequence typically have identical lists of identified peptides due to the problem of proteome undersampling in a bottom-up approach and, thus, cannot be distinguished by existing protein inference methods. Here, we propose the use of peptide feature information extracted from precursor mass spectra to assist in identification of proteins otherwise indistinguishable from MS/MS. The proposed method was integrated with a protein inference algorithm based on the parsimony principle and built-in in the postsearch utility Scavager. The results demonstrate increasing accuracy and efficiency of homologous protein identifications for the well characterized data sets including the one with known protein sequences from iPRG-2016 study.

Boosting MS1-only Proteomics with Machine Learning Allows 2000 Protein Identifications in Single-Shot Human Proteome Analysis Using 5 min HPLC Gradient

Proteome-wide analyses rely on tandem mass spectrometry and the extensive separation of proteolytic mixtures. This imposes considerable instrumental time consumption, which is one of the main obstacles in the broader acceptance of proteomics in biomedical and clinical research. Recently, we presented a fast proteomic method termed DirectMS1 based on ultrashort LC gradients as well as MS1-only mass spectra acquisition and data processing. The method allows significant reduction of the proteome-wide analysis time to a few minutes at the depth of quantitative proteome coverage of 1000 proteins at 1% false discovery rate (FDR). In this work, to further increase the capabilities of the DirectMS1 method, we explored the opportunities presented by the recent progress in the machine-learning area and applied the LightGBM decision tree boosting algorithm to the scoring of peptide feature matches when processing MS1 spectra. Furthermore, we integrated the peptide feature identification algorithm of DirectMS1 with the recently introduced peptide retention time prediction utility, DeepLC. Additional approaches to improve the performance of the DirectMS1 method are discussed and demonstrated, such as using FAIMS for gas-phase ion separation. As a result of all improvements to DirectMS1, we succeeded in identifying more than 2000 proteins at 1% FDR from the HeLa cell line in a 5 min gradient LC-FAIMS/MS1 analysis. The data sets generated and analyzed during the current study have been deposited to the ProteomeXchange Consortium via the PRIDE partner repository with the data set identifier PXD023977.

Biosaur: An open-source Python software for liquid chromatography-mass spectrometry peptide feature detection with ion mobility support

RATIONALE

One of the important steps in initial data processing of peptide mass spectra is the detection of peptide features in full-range mass spectra. Ion mobility offers advantages over previous methods performing this detection by providing an additional structure-specific separation dimension. However, there is a lack of open-source software that utilizes these advantages and detects peptide features in mass spectra acquired along with ion mobility data using new instruments such as timsTOF and/or FAIMS-Orbitrap.

METHODS

Recently, a utility called Dinosaur was presented, which provides an efficient way for feature detection in peptide ion mass spectra. In this work we extended its functionality by developing Biosaur software to fully employ the additional information provided by ion mobility data. Biosaur was developed using the Python 3.8 programming language.

RESULTS

Biosaur supports the processing of data acquired using mass spectrometers with ion mobility capabilities, specifically timsTOF and FAIMS. In addition, it processes mass spectra obtained in negative ion mode and reports cosine correlation table for peptide features which is useful for differentiation between in-source fragments and semi-tryptic peptides.

CONCLUSIONS

Biosaur is a utility for detecting peptide features in liquid chromatography-mass spectra with ion mobility and negative ion supports. The software is distributed with an open-source APACHE 2.0 license and is freely available on Github: https://github.com/abdrakhimov1/Biosaur.

Quantitative shotgun proteome analysis by direct infusion

Liquid chromatography mass spectrometry (LC-MS) delivers sensitive peptide analysis for proteomics, but the methodology requires extensive analysis time, hampering throughput. Here, we demonstrate that using gas-phase peptide separation instead of LC enables fast proteome analysis. Using Direct Infusion – Shotgun Proteome Analysis (DI-SPA) by data-independent acquisition mass spectrometry (DIA-MS), we demonstrate the targeted quantification of over 500 proteins within minutes of MS data collection (~3.5 proteins/second). We show the utility of this technology to perform a complex multifactorial proteome study of interactions between nutrients, genotype, and mitochondrial toxins in a collection of cultured human cells. More than 45,000 quantitative protein measurements from 132 samples were achieved in only 4.4 hours of MS data collection. Enabling fast, unbiased proteome quantification without LC, DI-SPA offers an approach to boosting throughput critical to drug and biomarker discovery studies that require analysis of thousands of proteomes.

Histo-molecular differentiation of renal cancer subtypes by mass spectrometry imaging and rapid proteome profiling of formalin-fixed paraffin-embedded tumor tissue sections

Pathology differentiation of renal cancer types is challenging due to tissue similarities or overlapping histological features of various tumor (sub) types. As assessment is often manually conducted outcomes can be prone to human error and therefore require high-level expertise and experience. Mass spectrometry can provide detailed histo-molecular information on tissue and is becoming increasingly popular in clinical settings. Spatially resolving technologies such as mass spectrometry imaging and quantitative microproteomics profiling in combination with machine learning approaches provide promising tools for automated tumor classification of clinical tissue sections.

In this proof of concept study we used MALDI-MS imaging (MSI) and rapid LC-MS/MS-based microproteomics technologies (15 min/sample) to analyze formalin-fixed paraffin embedded (FFPE) tissue sections and classify renal oncocytoma (RO, n = 11), clear cell renal cell carcinoma (ccRCC, n = 12) and chromophobe renal cell carcinoma (ChRCC, n = 5). Both methods were able to distinguish ccRCC, RO and ChRCC in cross-validation experiments. MSI correctly classified 87% of the patients whereas the rapid LC-MS/MS-based microproteomics approach correctly classified 100% of the patients.

This strategy involving MSI and rapid proteome profiling by LC-MS/MS reveals molecular features of tumor sections and enables cancer subtype classification. Mass spectrometry provides a promising complementary approach to current pathological technologies for precise digitized diagnosis of diseases.

PASS-DIA: A Data-Independent Acquisition Approach for Discovery Studies

A data-independent acquisition (DIA) approach is being increasingly adopted as a promising strategy for identification and quantitation of proteomes. As most DIA data sets are acquired with wide isolation windows, highly complex MS/MS spectra are generated, which negatively impacts obtaining peptide information through classical protein database searches. Therefore, the analysis of DIA data mainly relies on the evidence of the existence of peptides from prebuilt spectral libraries. Consequently, one major weakness of this method is that it does not account for peptides that are not included in the spectral library, precluding the use of DIA for discovery studies. Here, we present a strategy termed Precursor ion And Small Slice-DIA (PASS-DIA) in which MS/MS spectra are acquired with small isolation windows (slices) and MS/MS spectra are interpreted with accurately determined precursor ion masses. This method enables the direct application of conventional spectrum-centric analysis pipelines for peptide identification and precursor ion-based quantitation. The performance of PASS-DIA was observed to be superior to both data-dependent acquisition (DDA) and conventional DIA experiments with 69 and 48% additional protein identifications, respectively. Application of PASS-DIA for the analysis of post-translationally modified peptides again highlighted its superior performance in characterizing phosphopeptides (77% more), N-terminal acetylated peptides (56% more), and N-glycopeptides (83% more) as compared to DDA alone. Finally, the use of PASS-DIA to characterize a rare proteome of human fallopian tube organoids enabled 34% additional protein identifications than DDA alone and revealed biologically relevant pathways including low abundance proteins. Overall, PASS-DIA is a novel DIA approach for use as a discovery tool that outperforms both conventional DDA and DIA experiments to provide additional protein information. We believe that the PASS-DIA method is an important strategy for discovery-type studies when deeper proteome characterization is required.