Bioorthogonal Reactions Amplify Magnetic Nanoparticles Binding and Assembly for Ultrasensitive Magnetic Resonance Sensing

Magnetic relaxation switch biosensor for detection of Vibrio parahaemolyticus based on photocleavable hydrogel

BACKGROUND

Foodborne pathogens, particularly Vibrio parahaemolyticus (VP) found in seafood, pose significant health risks, including abdominal pain, nausea, and even death. Rapid, accurate, and sensitive detection of these pathogens is crucial for food safety and public health. However, existing detection methods often require complex sample pretreatment, which limits their practical application. This study aims to overcome these limitations by developing a label-free magnetic relaxation switch (MRS) biosensor for the detection of VP, utilizing a photocleavable sol-gel phase transition system for improved efficiency and accuracy.

RESULTS

In this work, a tag-free magnetic relaxation switch (MRS) biosensor was designed for the detection of Vibrio parahaemolyticus (VP), based on a photocleavable sol-gel phase transition system. A large amount of lithium acyl hypophosphite (LAP), gold nanoparticles (AuNPs), and single-stranded DNA (ssDNA) loaded on the surface of Ti3C2Tx MXene acted as the signal unit LAP-MXene@AuNPs-ssDNA. The pipette tip served as a reaction vessel, and when VP was present, Apt specifically captured VP and released the signal units. The released signal units were then injected into the low-field nuclear magnetic resonance (LF-NMR) test solution, a gel formed by crosslinking of disulfide bonds. The gel was cleaved by LAPs on the signal units under ultraviolet (UV) irradiation, triggering a gel-sol phase transition, which increased transverse relaxation time (T2), thus enabling the detection of VP. Under the optimal experimental conditions, the linear range and detection limit for VP were 102 ∼ 108 CFU/mL and 10 CFU/mL, respectively.

SIGNIFICANCE AND NOVELTY

The simplified biometric identification process in the pipette tip reduces errors from multiple sample transfers, enhancing efficiency. The use of photocleavable hydrogel for signal output eliminates issues associated with magnetic material aggregation, significantly improving detection precision. The assay is of good selectivity, stability reproducibility, and convenience, having a broad application prospect in the rapid detection of pathogenic bacteria in the field.

Magnetic engineering nanoparticles: Versatile tools revolutionizing biomedical applications

The use of nanoparticles has increased significantly over the past few years in a number of fields, including diagnostics, biomedicine, environmental remediation, and water treatment, generating public interest. Among various types of nanoparticles, magnetic nanoparticles (MNPs) have emerged as an essential tool for biomedical applications due to their distinct physicochemical properties compared to other nanoparticles. This review article focuses on the recent growth of MNPs and comprehensively reviews the advantages, multifunctional approaches, biomedical applications, and latest research on MNPs employed in various biomedical techniques. Biomedical applications of MNPs hold on to their ability to rapidly switch magnetic states under an external field at room temperature. Ideally, these MNPs should be highly susceptible to magnetization when the field is applied and then lose that magnetization just as quickly once the field is removed. This unique property allows MNPs to generate heat when exposed to high-frequency magnetic fields, making them valuable tools in developing treatments for hyperthermia and other heat-related illnesses. This review underscores the role of MNPs as tools that hold immense promise in transforming various aspects of healthcare, from diagnostics and imaging to therapeutic treatments, with discussion on a wide range of peer-reviewed articles published on the subject. At the conclusion of this work, challenges and potential future advances of MNPs in the biomedical field are highlighted.

Well plate-based LF-NMR/colorimetric dual-mode homogeneous immunosensor for Vibrio parahaemolyticus detection

A 96-well plate-based low-field nuclear magnetic resonance (LF-NMR)/colorimetric dual-mode homogeneous immunosensor was developed for the detection of pathogen bacteria, using Vibrio parahaemolyticus (VP) as a detection template. The signal unit MNS@Ab2 is graphene oxide (GO) simultaneously loaded with VP antibody and Fe3O4 nanoparticles. A 96-well plate coated with VP antibody captures the target VP, which then binds the signal unit to form the immunocomplex. After acidolysed, Fe3O4 nanoparticles are transformed into Fe3+ and Fe2+, so the non-homogeneous system is transformed into a homogeneous one. The addition of KMnO4 can not only convert Fe2+ into Fe3+ but also provide Mn2+, improving the detection sensitivity. And, colorimetric analysis can be achieved by the quantitative reduction of KMnO4. Under the optimal experimental conditions, the limit of detection was 60 CFU/mL with good selectivity, stability, precision, accuracy, and consistency, providing a simple and reliable detection platform for pathogenic bacteria in food.

An LF-NMR homogeneous immunoassay for Vibrio parahaemolyticus based on superparamagnetic 2D nanomaterials

In this work, a sensitive low field nuclear magnetic resonance (LF-NMR) homogeneous immunoassay, also called magnetic resonance switch (MRSw) sensor, for Vibrio parahaemolyticus (VP) was developed. Superparamagnetic 2D nanomaterial was designed and used as the magnetic probe of MRSw sensor. It was GO@SPIONs&Ab, a composite nanomaterial with many superparamagnetic Fe3O4 nanoparticles (SPIONs) providing a magnetic signal and VP antibody (Ab) specifically recognizing the target VP evenly distributed on the surface of GO. The presence of VP controllably changed the aggregation state of the probe, eliminating the uncertainty of MRSw sensor type, and thus then achieving a regular variation of transverse relaxation time T2 and ensuing quantitative detection of VP. Triple signal enhancement of the MRSw sensor was obtained due to the application of the designed 2D probe, by increasing the number of SPIONs, improving the magnetic intensity and susceptibility, and forming a synergistic effect. Under optimized experimental conditions, VP could be detected with satisfied sensitivity, selectivity, precision, accuracy, and stability, even in turbid real samples. LOQ for VP was 10 CFU/mL. This detection principle is widely applicable, providing an idea for the construction of highly sensitive MRSw sensors.

Magnetic relaxation switch sensor based on aptamer-modified poly-L-lysine-ferroferric oxide magnetic nanoparticles and graphene oxide for the determination of insecticides in vegetables

A simple and effective graphene oxide-magnetic relaxation switch (GO-MRS) sensor that combines graphene oxide (GO) and aptamer-modified poly-L-lysine(PLL)-Fe₃O₄ nanoparticles (Fe₃O₄@PLL-Apt NPs) was designed for the detection of acetamiprid (ACE). In this sensor, Fe₃O₄@PLL-Apt NPs acted as a relaxation signal probe and GO facilitated the generation of relaxation signal changes (dispersion/aggregation shift), while the aptamer is a molecular component that recognizes ACE. This GO-assisted magnetic signal probe improves the stability of magnetic nanoparticles in solution and enhances their sensitivity to small molecules while avoiding cross-reactions. Under optimal conditions, the sensor exhibits a wide working range (10-80 nM) and low detection limit (8.43 nM). The spiked recoveries ranged from 96.54 to 103.17%, with a relative standard deviation (RSD) of less than 2.3%. In addition, the performance of the GO-MRS sensor matched that of the standard method (liquid chromatography-mass spectrometry (LC-MS)), indicating that the GO-MRS sensor is suitable for the detection of ACE in vegetables.

Cluster-bomb type magnetic biosensor for ultrasensitive detection of Vibrio parahaemolyticus based on low field nuclear magnetic resonance

Herein, a novel cluster-bomb type signal sensing and amplification strategy in low field nuclear magnetic resonance was proposed, and a magnetic biosensor for ultrasensitive homogeneous immunoassay of Vibrio parahaemolyticus (VP) was developed. The capture unit MGO@Ab was magnetic graphene oxide (MGO) immobilized by VP antibody (Ab) to capture VP. And, the signal unit PS@Gd-CQDs@Ab was polystyrene (PS) pellets covered by Ab to recognize VP and Gd-CQDs i.e. carbon quantum dots (CQDs) containing lots of magnetic signal labels Gd³⁺. In presence of VP, the immunocomplex signal unit-VP-capture unit could be formed and separated by magnetic force conveniently from the sample matrix. With the successive introduction of disulfide threitol and hydrochloric acid, signal units were cleaved and disintegrated, resulting in a homogeneous dispersion of Gd³⁺. Thus, cluster-bomb type dual signal amplification was achieved through increasing the amount and the dispersity of signal labels simultaneously. Under optimal experimental conditions, VP could be detected in the concentration range of 5-1.0 × 10⁶ CFU/mL, with a limit of quantitation (LOQ) 4 CFU/mL. In addition, satisfactory selectivity, stability and reliability could be obtained. Therefore, this cluster-bomb type signal sensing and amplification strategy is powerful in designing magnetic biosensor and detecting pathogenic bacteria.

Magnetic relaxation switching assay based on three-dimensional assembly of Fe3O4@ZIF-8 for detection of cadmium ions

The design and construction of a novel magnetic resonance switch (MRS) sensor for cadmium ion (Cd2+) detection is described. Fe3O4@ZIF-8 was synthesized through seed-mediated growth of dimercaptosuccinic acid-coated Fe3O4. Fe3O4@ZIF-8 with high relaxation value (163.086 mM-1 s-1) and large negative zeta potential (-20.69 mV) exhibited good magnetic relaxation performance and water solubility. The successfully synthesized Fe3O4@ZIF-8 was used to develop an immune recognition-based MOFs-MRS sensor for highly sensitive detection of Cd2+. The proposed MRS detected a wide linear range of Cd2+ concentration from 2 to 200 ng mL-1 with a low limit of detection of 0.65 ng mL-1 (S/N = 3), and displayed high selectivity towards matrix interference. The robust sensing system was effective even in a complex sample matrix, enabling the quantitative analysis of Cd2+ content in rice samples and drinking water samples with good reliability. Recoveries of Cd2+ ranged from 91.50 to 112.05% for spiked drinking water and from 95.86 to 110.45% for spiked rice samples. The versatility of Fe3O4@ZIF-8 with customized relaxation responses could allow the adaptation of magnetic resonance platforms for food safety purposes.

Using a quantum dot bead-based lateral flow immunoassay to broadly detect the adulteration of PDE-5 inhibitors in functional foods

In this study, a designed hapten possessing the classic structure of PDE-5 inhibitors was synthesized. A monoclonal antibody (mAb) with broad recognition for six PDE-5 inhibitors was further produced. For the determination of lodenafil, methisosildenafil, mirodenafil, udenafil and tadalafil, the limit of detection (LOD) and IC50 ranged from 1.01 to 26.91 ng mL-1 and 12.75 to 278 ng mL-1, respectively. Thereafter, a quantum dot bead-based lateral flow immunoassay (QB-LFIA) was developed, which improved the LOD and IC50 to 0.32-6.52 ng mL-1 and 7.45-133.8 ng mL-1, respectively. Method validation was conducted using honey and capsule samples spiked with PDE-5 inhibitors, and the recoveries of the intra- and inter-assays ranged from 81.01% to 108.16%, with coefficients of variation below 12.71%. In addition, the validity and the consistency have been confirmed with a comparison between QB-LFIA and HPLC-MS/MS (R2 = 0.9957). Furthermore, the developed QB-LFIA was employed for the inspection of real products, and several samples were found to be adulterated with lodenafil and methisosildenafil.

Advances in Imaging Modalities and Contrast Agents for the Early Diagnosis of Colorectal Cancer

Colorectal cancer is one of the most common gastrointestinal cancers worldwide. The mortality rate of colorectal cancer has declined by more than 20% due to the rapid development of early diagnostic techniques and effective treatment. At present, there are many diagnostic modalities available for the evaluation of colorectal cancer, such as the carcinoembryonic antigen test, the fecal occult blood test, endoscopy, X-ray barium meal, computed tomography, magnetic resonance imaging, and radionuclide examination. Sensitive and specific imaging modalities have played an increasingly important role in the diagnosis of colorectal cancer following the rapid development of novel contrast agents. This review discusses the applications and challenges of different imaging techniques and contrast agents applied to detect colorectal cancer, for the purpose of the early diagnosis and treatment of patients with colorectal cancer.

Double-enzymes-mediated Fe2+/Fe3+ conversion as magnetic relaxation switch for pesticide residues sensing

It is a great challenge to develop a newly rapid and accurate detection method for pesticide residues. In this work, based on acetylcholinesterase (AChE) and choline oxidase (CHO), a double-enzymes-mediated Fe²⁺/Fe³⁺ conversion as magnetic relaxation switch was explored for the measurement of acetamiprid residue. In the double-enzymes reactions, acetylcholine chloride (ACh) can be catalyzed to produce choline by AChE, which is successively hydrolyzed to betaine and hydrogen peroxide (H₂O₂) by CHO. According to the enzyme inhibition principle, AChE activity will be inactivated in the presence of acetamiprid, thus leading to the less production of H₂O₂. Wherein, Fe²⁺, ACh, AChE and CHO were optimized as the reaction substrates. In the reaction system, acetamiprid can be reflected by the transverse relaxation time (T₂) that related with H₂O₂ mediated Fe²⁺ variations, which was further developed as an enzyme cascade amplification method. The detection linear range is 0.01∼1000 μg mL^-1 (R² = 0.99), and the limit of detection (LOD) is 2.66 ng mL^-1 (S/N = 3, n = 3), behaving a 335-fold improvement in LOD than that of traditional enzyme inhibition method (0.89 μg mL^-1). This method can realize "one-step mixing" detection of acetamiprid, which makes it a promising analytical tool for monitoring pesticide residue in complicated samples.

Alginate Hydrogel-Embedded Capillary Sensor for Quantitative Immunoassay with Naked Eye

We have developed an alginate hydrogel-embedded capillary sensor (AHCS) for naked eye-based quantification of immunoassay. Alkaline phosphatase (ALP) can modulate gel-sol transformation to increase the permeability of Cu²⁺-cross-linked alginate hydrogel film in the AHCS, followed by solution exchange into the capillary. Through measuring the length of the liquid phase of the microfluidics in the capillary at a given time, the concentration of the ALP could be quantified with the naked eye. Since ALP is widely applied as a signal reporter for immunoassays, the AHCS could easily accommodate conventional immune sensing platforms. We justify the practicality of AHCS with hepatitis B virus surface antigen (HBsAg) in serum samples and got comparable results with commercialized immunoassay. This AHCS is easy to make and use, effective in cost, and robust in quantification with the naked eye, showing great promise for next generation point-of-care testing.