Pore Confinement-Enhanced Electrochemiluminescence on SnO2 Nanocrystal Xerogel with NO3- As Co-Reactant and Its Application in Facile and Sensitive Bioanalysis

Confinement-enhanced electrochemiluminescence by Ru(dcbpy)32+-functionalized γ-CD-MOF@COF-LZU1 porous hybrid material as micro-reactor for CYFRA 21-1 detection

The improvement of electrochemiluminescence (ECL) performance relies on the electron transfer efficiency between luminophore and coreactant. An ultrasensitive ECL micro-reactor with confinement-enhanced performance was prepared by using the covalent organic framework-LZU1-functionalized metal-organic framework (MOF@COF-LZU1) as a platform to assemble enormous N,N-dibutyl-2-hydroxyethylamine (DBAE) and tris(4,4'-dicarboxylic acid-2,2'-bipyridyl) ruthenium(II) [Ru(dcbpy)32+] into its pore channels. Compared to individual substances of γ-CD-MOF and COF-LZU1, the synergistic effects can conduce to the enhancement of the intensity, durability and sensitivity of the micro-reactor. Besides, COF-LZU1 can provide a mild environment to accommodate a certain amount of DBAE by concentrating them from the aqueous solution into its hydrophobic cavities and boost the oxidation efficiency of DBAE to generate more DBAE●+ and profited the survival of DBAE●, leading to an improved reaction efficiency with the Ru(dcbpy)32+ intermediate. Thanks to the confinement-enhanced strategy, engineered as high-functioning luminescent materials, Ru@γ-CD-MOF@COF-LZU1 micro-reactors decorated with Au NPs can facilitate electron transfer and capture primary antibodies (Ab1). Moreover, Au-Pd-Pt noble metal aerogels (NMAs) functionalized MoS2 NFs (Au-Pd-Pt NMAs@MoS2 NFs) were chosen as base material due to its large specific surface areas, high porosity, and excellent electrical conductivity. Based on above merits, the sensor demonstrated a sensitive response to CYFRA 21-1 detection in a linear concentration gradient from 10 fg/mL to 50 ng/mL with a detection limit of 0.0055 pg/mL (S/N = 3). The COF-LZU1 decorated ECL micro-reactors were constructed based on the signal amplification strategies to realize accurate CYFRA 21-1 detection.

Recent Advances in Electrochemiluminescence Biosensors for MicroRNA Detection

Electrochemiluminescence (ECL) as an analytical technology with a perfect combination of electrochemistry and spectroscopy has received considerable attention in bioanalysis due to its high sensitivity and broad dynamic range. Given the selectivity of bio-recognition elements and the high sensitivity of the ECL analysis technique, ECL biosensors are powerful platforms for the sensitive detection of biomarkers, achieving the accurate prognosis and diagnosis of diseases. MicroRNAs (miRNAs) are crucial biomarkers involved in a variety of physiological and pathological processes, whose aberrant expression is often related to serious diseases, especially cancers. ECL biosensors can fulfill the highly sensitive and selective requirements for accurate miRNA detection, prompting this review. The ECL mechanisms are initially introduced and subsequently categorize the ECL biosensors for miRNA detection in terms of the quenching agents. Furthermore, the work highlights the signal amplification strategies for enhancing ECL signal to improve the sensitivity of miRNA detection and finally concludes by looking at the challenges and opportunities in ECL biosensors for miRNA detection.

Electrophoretic deposition of Ru(bpy)32+ in vertically-ordered silica nanochannels: A solid-state electrochemiluminescence sensor for prolidase assay

Prolidase (PLD) plays a crucial role as a dipeptidase in various physiological processes, specifically involved in the cleavage of proline-containing dipeptides for efficient recycling of proline. The accurate determination of PLD activity holds significant importance in clinical diagnosis. Herein, a solid-state electrochemiluminescence (ECL) biosensor was developed to address the urgent need for PLD assay. The Ru(bpy)32+ was electrophoretically deposited within the nanochannels of vertically-ordered mesoporous silica film (VMSF) on indium tin oxide (ITO) electrodes. The Ru(bpy)32+-deposited VMSF/ITO (Ru-VMSF/ITO) exhibited a remarkable ECL response towards proline, attributed to the enhanced concentration of the reactants and improved electron transfer resulting from the nanoconfinement effect. As PLD specifically enzymolyzed the Gly-Pro dipeptide to release proline, a proline-mediated biosensor was developed for PLD assay. Increased PLD activity led to enhanced release of proline into the porous solid-state ECL sensors, resulting in a more robust ECL signal. There was a linear relationship between ΔECL intensity and logarithmic concentration of PLD in the range of 10-10000 U/L, with a detection limit of 1.98 U/L. Practical tests demonstrated the reliability and convenience of the proposed bioassay, making it suitable for widespread application in PLD assays.

Dynamic surface reconstruction of individual gold nanoclusters by using a co-reactant enables color-tunable electrochemiluminescence

Here we report for the first time the phenomenon of continuously color-tunable electrochemiluminescence (ECL) from individual gold nanoclusters (Au NCs) confined in a porous hydrogel matrix by adjusting the concentration of the co-reactant. Specifically, the hydrogel-confined Au NCs exhibit strong dual-color ECL in an aqueous solution with triethylamine (TEA) as a co-reactant, with a record-breaking quantum yield of 95%. Unlike previously reported Au NCs, the ECL origin of the hydrogel-confined Au NCs is related to both the Au(0) kernel and the Au(i)-S surface. Surprisingly, the surface-related ECL of Au NCs exhibits a wide color-tunable range of 625-829 nm, but the core-related ECL remains constant at 489 nm. Theoretical and experimental studies demonstrate that the color-tunable ECL is caused by the dynamic surface reconstruction of Au NCs and TEA radicals. This work opens up new avenues for dynamically manipulating the ECL spectra of core-shell emitters in biosensing and imaging research.

Dual detection and quantification of hypochlorite and sulfite ions via SERS spectroscopy by utilizing the redox reaction of tetramethylbenzidine

We developed a highly efficient, ultra-sensitive, and selective dual detection sensor for hypochlorite (ClO-) and sulfite (SO32-) ions based on surface-enhanced Raman scattering (SERS) spectroscopy. 3,3',5,5'-Tetramethylbenzidine (TMB) is oxidized by ClO- under acidic conditions to diazotized oxTMB that, when electrostatically adsorbed onto Au nanoparticles (NPs), produces a strong Raman signal at 1605 cm-1. Meanwhile, oxTMB is reduced to TMB by SO32-, which significantly reduces the Raman signal. The linear detection range of the proposed sensor is 10-10 to 10-6 M with a detection limit of 59 pM for ClO- and 10-9 to 10-5 M with a detection limit of 5.4 nM for SO32-. In addition, the sensor was successfully applied to detect ClO- and SO32- in water samples.

Circular DNAzyme-Switched CRISPR/Cas12a Assay for Electrochemiluminescent Response of Demethylase Activity

DNA nanostructure provides powerful tools for DNA demethylase activity detection, but its stability has been significantly challenged. By virtue of circular DNA with resistance to exonuclease degradation, herein, the circular DNAzyme duplex with artificial methylated modification was constructed to identify the target and output the DNA activators to drive the CRISPR/Cas12a, constructing an "on-off-on" electrochemiluminescence (ECL) biosensor for monitoring the activity of the O6-methylguanine-DNA methyltransferase (MGMT). Specifically, the circular DNAzyme duplex consisted of the chimeric RNA-DNA substrate ring with double activator sequences and two single-stranded DNAzymes, whose catalytic domains were premodified with the methyl groups. When the MGMT was present, the methylated DNAzymes were repaired and restored the catalytic activity to cleave the chimeric RNA-DNA substrates, followed by the output of DNA activators to initiate the CRISPR/Cas12a. Subsequently, the ECL signals of silver nanoparticle-modified SnO2 nanospheres (Ag@SnO2) were recovered by releasing the ferrocene-labeled quenching probes (Fc-DNA) from the electrode surface because of the trans-cleavage activity of CRISPR/Cas12a, thus achieving the specific and sensitive ECL detection of MGMT from 2.5 × 10-4 to 2.5 × 102 ng/mL with a low limit (9.69 × 10-5 ng/mL). This strategy affords novel ideas and insights into research on how to project stable nucleic acid probes to detect DNA demethylases beyond traditional methods.

Spherical nucleic acid enzyme programmed network to accelerate CRISPR assays for electrochemiluminescence biosensing applications

Given the targeted binding ability and cleavage activity of the emerging CRISPR/Cas12a assay which transduces the target into its cleavage activity exhibited broadly prospective applications in integrated sensing and actuating system. Here, we elaborated a universal approach to quickly activate CRISPR/Cas12a for low-abundance biomarker detection based on the amplification strategy of a target-induced spherical nucleic acid enzyme (SNAzyme) network that could accelerate the output of activators. Specifically, multifunctional Y-shaped probes and hairpin probes (HPs, which contained the specific sequence of the activators of CRISPR/Cas12a and the substrate chain of DNAzyme) were rationally designed to construct SNAzyme. Target recognition induced disassembly of the Y-shaped probes, which released DNAzyme strands to active DNAzyme and accompanied by SNAzyme self-assembly into SNAzyme network. Interestingly, compared with randomly dispersed SNAzyme, the reaction kinetics of the SNAzyme network enhanced 1.6 times in response to Α-methyl acyl-CoA racemase (AMACR, a biomarker for prostate cancer), which was attributed to the promoted catalytic efficiency of DNAzyme by the confined SNAzyme network. Benefiting from these, the prepared biosensor based on electrochemiluminescence (ECL) platform by loading AuAg nanoclusters (AuAgNCs) into metal-organic framework-5 (MOF-5) exhibited satisfying detection performance for AMACR with a wide linear range (0.001 μg/mL to 100 μg/mL) and a low detection limit (1.0 × 10-4 μg/mL, which exhibited significant potential in clinical diagnoses.

A metal-organic framework regulated graphdiyne-based electrochemiluminescence sensor with a electrocatalytic self-acceleration effect for the detection of di-(2-ethylhexyl) phthalate

In this work, a super-sensitive electrochemiluminescence (ECL) aptamer sensor was constructed using a multiple signal amplification strategy to realize ultra-sensitive detection of di-(2-ethylhexyl) phthalate (DEHP). The incorporation of a highly efficient electrocatalytic metal-organic framework (NH2-Zr-MOF) and graphdiyne (GDY) composite has significantly enhanced the overall electrochemically active surface area, facilitating electron transfer during the entire electrochemical reaction process, and the large number of pores in graphdiyne and NH2-Zr-MOF limited a series of redox reactions within a certain range. This resulted in the generation of a greater number of SO4˙- radicals, thereby boosting the ECL intensity of the GDY in the K2S2O8 system. To increase the performance of the sensor even further, sodium ascorbate (NaAsc) as an accelerator was added to the co-reactant system. Additionally, nitrogen micro-nano bubbles with higher stability and stronger mass transfer have been introduced into the ECL system for the first time. Based on these, the aptamer as the recognition element realized the ultra-sensitive detection of DEHP in the linear range of 1.0 × 10-12 to 1.0 × 10-4 mg mL-1 with the limit of detection (LOD) of 2.43 × 10-13 mg mL-1. In summary, we have utilized the electrocatalytic activity of the porous MOF and the reducing capability of sodium ascorbate to enhance the ECL emission of GDY, which has been successfully applied to the detection of DEHP in water samples.

Highly Efficient Dual-Color Luminophores for Sensitive and Selective Detection of Diclazepam Based on MOF/COF Bi-Mesoporous Composites

Currently, studies on electrochemiluminescence (ECL) mainly focused on the single emission of luminophores while those on multi-color ECL were rarely reported. Here, a bi-mesoporous composite of the metal-organic framework (MOF)/covalent-organic framework (COF) with strong and stable dual-color ECL was prepared to construct a novel ECL sensor for sensitive detecting targets. A PTCA-COF with excellent ECL performance was loaded with a great amount of another ECL emitter Cu₃(HHTP)₂. Remarkably, the integrated composite had both ECL properties of PTCA-COF at 520 nm and Cu₃(HHTP)₂ at 600 nm wavelengths. Furthermore, Cu₃(HHTP)₂ with good electron transfer ability can greatly enhance the electrical conductivity and promote electrochemical activation. Thus, the simultaneous enhanced two-color ECL intensity and the catalytic properties of the conductive MOF exerted a dual enhancement effect on the ECL signal of the composite. Significantly, diclazepam can not only be adsorbed well on the multi-stage porous structure MOF/COF composite by π-π interactions but also selectively quench the ECL signal of the PTCA-COF, realizing the sensitive detection. The ECL sensor showed a wide detection range from 1.0 × 10^-13 to 1.0 × 10^-8 g/L, and the limit of detection (LOD) was as low as 2.6 × 10^-14 g/L (S/N = 3). The proposed ECL sensor preparation method was simple and sensitive, providing a new perspective for the potential application of multi-color ECL in the sensing field.

Identification and Quantification of 5-Methylcytosine and 5-Hydroxymethylcytosine on Random DNA Sequences by a Nanoconfined Electrochemiluminescence Platform

5-Methylcytosine (5mC) and 5-hydroxymethylcytosine (5hmC) are two of the most abundant epigenetic marks in mammalian genomes, and it has been proven that these dual epigenetic marks give a more accurate prediction of recurrence and survival in cancer than the individual mark. However, due to the similar structure and low expression of 5mC and 5hmC, it is challenging to distinguish and quantify the two methylation modifications. Herein, we employed the ten-eleven translocation family dioxygenases (TET) to convert 5mC to 5hmC via a specific labeling process, which realized the identification of the two marks based on a nanoconfined electrochemiluminescence (ECL) platform combined with the amplification strategy of a recombinase polymerase amplification (RPA)-assisted CRISPR/Cas13a system. Benefiting from the TET-mediated conversion strategy, a highly consistent labeling pathway was developed for identifying dual epigenetic marks on random sequence, which reduced the system error effectively. The ECL platform was established via preparing a carbonized polymer dot embedded SiO₂ nanonetwork (CPDs@SiO₂), which exhibited higher ECL efficiencies and more stable ECL performance compared to those of the scattered emitters due to the nanoconfinement-enhanced ECL effect. The proposed bioanalysis strategy could be employed for the identification and quantification of 5mC and 5hmC in the range from 100 aM to 100 pM, respectively, which provides a promising tool for early diagnosis of diseases associated with abnormal methylation.

Electrochemiluminescence nanoemitters for immunoassay of protein biomarkers

The family of electrochemiluminescent luminophores has witnessed quick development since the electrochemiluminescence (ECL) phenomenon of silicon nanoparticles was first reported in 2002. Moreover, these developed ECL nanoemitters have extensively been applied in sensitive detection of protein biomarker by combining with immunological recognition. This review firstly summarized the origin and development of various ECL nanoemitters including inorganic and organic nanomaterials, with an emphasis on metal-organic frameworks (MOFs)-based ECL nanoemitters. Several effective strategies to amplify the ECL response of nanoemitters and improve the sensitivity of immunosensing were discussed. The application of ECL nanoemitters in immunoassay of protein biomarkers for diagnosis of cancers and other diseases, especially lung cancer and heart diseases, was comprehensively presented. The recent development of ECL imaging with the nanoemitters as ECL tags for detection of multiplex protein biomarkers on single cell membrane also attracted attention. Finally, the future opportunities and challenges in the ECL biosensing field were highlighted.

Direct Visualization of Nanoconfinement Effect on Nanoreactor via Electrochemiluminescence Microscopy

Nanoconfinement in mesoporous nanoarchitectures could dramatically change molecular transport and reaction kinetics during electrochemical process. A molecular-level understanding of nanoconfinement and mass transport is critical for the applications, but a proper route to study it is lacking. Herein, we develop a single nanoreactor electrochemiluminescence (SNECL) microscopy based on Ru(bpy)₃ ²⁺ -loaded mesoporous silica nanoparticle to directly visualize in situ nanoconfinement-enhanced electrochemical reactions at the single molecule level. Meanwhile, mass transport capability of single nanoreactor, reflected as long decay time and recovery ability, is monitored and simulated with a high spatial resolution. The nanoconfinement effects in our system also enable imaging single proteins on cellular membrane. Our SNECL approach may pave the way to decipher the nanoconfinement effects during electrochemical process, and build bridges between mesoporous nanoarchitectures and potential electrochemical applications.

High Electrochemiluminescence from Ru(bpy)3 2+ Embedded Metal-Organic Frameworks to Visualize Single Molecule Movement at the Cellular Membrane

Direct imaging of single-molecule and its movement is of fundamental importance in biology, but challenging. Herein, aided by the nanoconfinement effect and resultant high reaction activity within metal-organic frameworks (MOFs), the designed Ru(bpy)₃ ²⁺ embedded MOF complex (RuMOFs) exhibits bright electrochemiluminescence (ECL) emission permitting high-quality imaging of ECL events at single molecule level. By labeling individual proteins of living cells with single RuMOFs, the distribution of membrane tyrosine-protein-kinase-like7 (PTK7) proteins at low-expressing cells is imaged via ECL. More importantly, the efficient capture of ECL photons generated inside the MOFs results in a stable ECL emission up to 1 h, allowing the in operando visualization of protein movements at the cellular membrane. As compared with the fluorescence observation, near-zero ECL background surrounding the target protein with the ECL emitter gives a better contrast for the dynamic imaging of discrete protein movement. This achievement of single molecule ECL dynamic imaging using RuMOFs will provide a more effective nanoemitter to observe the distribution and motion of individual proteins at living cells.

Ultrahighly Sensitive Sandwich-Type Electrochemical Immunosensor for Selective Detection of Tumor Biomarkers

Herein, a novel sandwich-type immunosensor was designed using Pt nanoparticle-decorated SnS₂ nanoplates (Pt@SnS₂) as a matrix and N,B-doped Eu MOF (N,B-Eu MOF) nanospheres as a signal amplifier. In Pt@SnS₂, Pt nanoparticles (NPs) enhance the surface electron transport capability and electrochemiluminescence (ECL) performance of SnS₂ nanoplates. The dual "antenna" effect of 5-boronoisophthalic acid (5-bop) and 5-nitroisophthalic acid (5-nop) enables the N,B-Eu MOFs to show very good ECL performance at the cathode. In the presence of the target carcinoembryonic antigen (CEA), the sandwich-type immunosensor provides specific immune responses, and the ECL signal of the immunosensor is greatly amplified by the signal probe N,B-Eu MOFs. In view of the above, the immunosensor was successfully applied for highly sensitive and selective detection of CEA with a detection limit of 0.06 pg·mL^-1. This sensor exhibits high sensitivity and specificity, excellent stability, good reproducibility, and good practicability in real human serum.

Electrochemiluminescence covalent organic framework coupling with CRISPR/Cas12a-mediated biosensor for pesticide residue detection

The trace detection of pesticide residue becomes particularly important since increasing attentions have been attached to food safety. Herein, we developed an electrochemiluminescence (ECL) covalent organic framework (COF) based-biosensor for trace pesticide detection coupling with CRISPR/Cas12a-mediated signal accumulation strategy. Firstly, the target conversion was carried out with an aptamer-assembled magnetic spherical nucleic acids, which can convert acetamiprid to activator DNA, triggering the CRISPR/Cas12a to make quenching probes far away from electrode for signal accumulation. The COF with stable and strong ECL was synthesized by a condensation reaction between the perylene-3,4,9,10-tetracarboxylic dianhydride (PTCDA) and melamine (MA), due to the highly ordered arrangement of the PTCDA luminescence units among COF structure and the pore confinement effect. Moreover, the designed assay method was successfully employed to detect the residual level of acetamiprid in real sample and expected to be widely used in pesticide-related food safety.

Novel Dual-Signal Electrochemiluminescence Aptasensor Involving the Resonance Energy Transform System for Kanamycin Detection

Based on luminol-capped Pt-tipped Au bimetallic nanorods (NRs) (L-Au-Pt NRs) as the anode emitter and SnS₂ quantum dots (QDs) hybrid Eu metal organic frameworks (MOFs) (SnS₂ QDs@Eu MOFs) as the cathode emitter, a dual-signal electrochemiluminescence (ECL) platform was designed for the ultrasensitive and highly selective detection of kanamycin (KAN). Using a dual-signal output mode, the ratiometric ECL aptasensor largely eliminates false-positives or false-negatives by self-calibration in the KAN assay process. To stimulate the resonance energy transform (RET) system, the KAN aptamer and complementary DNA are introduced for conjugation between the donor and acceptor. With the specific recognition of target KAN by its aptamer, L-Au-Pt NRs-apt partially peels off from the electrode surface. Eventually, the RET system is removed, leading to an increasing cathode signal and a decreasing anode signal. In view of this phenomenon, the ratiometric aptasensor can quantify KAN from 1 pM to 10 nM with a low detection limit of 0.32 pM. This dual-signal ECL aptasensor exhibits great practical potential in environmental monitoring and food safety.

MicroRNA-Triggered Deconstruction of Field-Free Spherical Nucleic Acid as an Electrochemiluminescence Biosensing Switch

Herein, a new field-free and highly ordered spherical nucleic acid (SNA) nanostructure was self-assembled directly by ferrocene (Fc)-labeled DNA tweezers and DNA linkers based on the Watson-Crick base pairing rule, which was employed as an electrochemiluminescence (ECL) quenching switch with improved recognition efficiency due to the high local concentration of the ordered nanostructure. Moreover, with a collaborative strategy combined with the advantages of both self-accelerated approach and pore confinement-enhanced ECL effect, the mesoporous silica nanospheres (mSiO₂ NSs) were prepared to be filled with rubrene (Rub) as ECL emitters and Pt nanoparticles (PtNPs) as coreaction accelerators (Rub-Pt@mSiO₂ NSs), which demonstrated high ECL response in the aqueous media (dissolved O₂ as coreactant). When the SNA nanostructure was immobilized on the Rub-Pt@mSiO₂ NSs-modified electrode, it presented a "signal off" state owing to the quenching effect of the Fc molecules. As a proof of concept, the SNA-based ECL switch platform was applied in the detection of microRNA let-7b (let-7b). Impressively, in the presence of the target let-7b, a deconstruction of the SNA nanostructure was actuated, causing the Fc to leave the electrode surface and achieved an extremely high ECL recovery ("signal on" state). Hence, a sensitive determination for let-7b was realized with a low detection limit of 1.8 aM ranging from 10 aM to 1 nM by employing the Rub-Pt@mSiO₂ NSs-based ECL platform combined with the target-triggered SNA deconstruction, which also offered an ingenious method for the further applications of biomarker analyses.

Ternary Electrochemiluminescence Biosensor Based on DNA Walkers and AuPd Nanomaterials as a Coreaction Accelerator for the Detection of miRNA-141

In this study, a ternary electrochemiluminescence (ECL) sensing platform coupled with a multiple signal amplification strategy was proposed for ultrasensitive detection of miRNA-141. The initial signal amplification was achieved via three-dimensional reduced graphene oxide (3D-rGO)@Au nanoparticles (NPs) to form an excellent conductive layer. Then, AuPd NPs as a coreaction accelerator was introduced into the N-(4-aminobutyl)-N-(ethylisoluminol) (ABEI)-H₂O₂ system to facilitate the transformation from H₂O₂ to excess superoxide anion radicals (O₂^•-), which further amplified the ECL emission of ABEI, leading to a significant increase of the ECL signal. Meanwhile, in the presence of miRNA-141 and T7 Exonuclease (T7 Exo), the self-assembled DNA swing arm can be driven to walk autonomously. The DNA walker reaction could result in the release of numerous labeled luminophores, which could react to achieve an extremely weak ECL signal. Surprisingly, the established ECL sensor platform for the detection of miRNA-141 demonstrated excellent sensitivity with a low detection limit of 31.9 aM in the concentration range from 100 aM to 1 nM. Consequently, the designed strategy greatly improves the luminous efficiency of the ternary ECL system and provides a special approach for the detection of nucleic acids and biomarkers in clinical and biochemical analysis.

Iodine Capture with Mechanically Robust Heat-Treated Ag-Al-Si-O Xerogel Sorbents

Various radionuclides are released as gases during reprocessing of used nuclear fuel or during nuclear accidents including iodine-129 (129I) and iodine-131 (131I). These isotopes are of particular concern to the environment and human health as they are environmentally mobile and can cause thyroid cancer. In this work, silver-loaded heat-treated aluminosilicate xerogels (Ag-HTX) were evaluated as sorbents for iodine [I2(g)] capture. After synthesis of the base NaAlSiO4 xerogel, a heat-treatment step was performed to help increase the mechanical integrity of the NaAlSiO4 gels (Na-HTX) prior to Ag-exchanging to create Ag-HTX xerogels. Samples were characterized by powder X-ray diffraction, scanning electron microscopy, energy-dispersive X-ray spectroscopy, transmission electron microscopy, Brunauer-Emmett-Teller analysis, gravimetric iodine loading, nanoindentation, and dynamic mechanical analysis. The structural and chemical analyses of Ag-HTX showed uniform distribution of Ag throughout the gel network after Ag-exchange. After I2(g) capture, the AgI crystallites were observed in the sorbent, verifying chemisorption as the primary iodine capture mechanism. Iodine loading of this xerogel was 0.43 g g-1 at 150 °C over 1 day and 0.52 g g-1 at 22 °C over 33 days. The specific surface area of Ag-HTX was 202 m2 g-1 and decreased to 87 m2 g-1 after iodine loading. The hardness of the Na-HTX was >145 times higher than that of the heat-treated aerogel of the same starting composition. The heat-treatment process increased Young's modulus (compressive) value to 40.8 MPa from 7.0 MPa of as-made xerogel, demonstrating the need for this added step in the sample preparation process. These results show that Ag-HTX is a promising sorbent for I2(g) capture with good iodine loading capacity and mechanical stability.

Recent advances in electrochemiluminescence luminophores

Electrochemiluminescence (ECL) has continued to receive considerable attention in various applications, owing to its intrinsic advantages such as near-zero background response, wide dynamic range, high sensitivity, simple instrumentation, and low cost. The ECL luminophore is one of the most significant components during the light generation processes. Despite significant progress that has been made in the synthesis of new luminophores and their roles in resolving various challenges, there are few comprehensive summaries on ECL luminophores. In this review, we discuss some of the recent advances in organic, metal complexes, nanomaterials, metal oxides, and near-infrared ECL luminophores. We also emphasize their roles in tackling various challenges with illustrative examples that have been reported in the last few years. Finally, perspective and some unresolved challenges in ECL that can potentially be addressed by introducing new luminophores have also been discussed. Graphical abstract.

A synergistic promotion strategy remarkably accelerated electrochemiluminescence of SnO2 QDs for MicroRNA detection using 3D DNA walker amplification

Developing low-cost and efficient methods to enhance the electrochemiluminescence (ECL) intensity of luminophores is highly desirable and challenging. Herein, we develop a synergistic promotion strategy based on three types of co-reaction accelerators to achieve an efficient SnO2 quantum dots (SnO2 QDs)-based ternary ECL system. Specifically, the MnO2 nanoflowers (MnO2 NFs), Ag nanoparticles (Ag NPs) and hemin/G-quadruplex were rationally selected as co-reaction accelerators. Owing to the synergistic effect, the deft integration of three types of co-reaction accelerators enabled better structural stability, more exposed catalytic active sites, and faster charge transfer, thus more effectively facilitating the reduction of co-reactant (S2O82-) compared with that of the single co-reaction accelerator. To demonstrate the practical utility of this principle, an "on-off-super on" ECL biosensor was constructed in combination with a 3D DNA walker, which showed a superior linear range (10 aM-100 pM) and a low detection limit (2.9 aM) for the highly-sensitive miRNA-21 detection. In general, this work firstly reported that three types of co-reaction accelerators were deftly integrated to remarkably amplify the ECL emission of SnO2 QDs, and provided brand-new perspectives for research on the ingenious design of the structure and component of highly efficient co-reaction accelerators.