Plasmonic Enhanced Gold Nanoclusters-Based Photoelectrochemical Biosensor for Sensitive Alkaline Phosphatase Activity Analysis

Highly sensitive photoelectrochemical biosensing detection of early cardiac injury enabled by novel self-assembled Bi2O3/MgIn2S4 photoelectrode coupled with ZnSnO3 quencher

The development of photoelectrochemical (PEC) biosensors plays a critical role in enabling timely intervention and personalized treatment for cardiac injury. Herein, a novel approach is presented for the fabrication of highly sensitive PEC biosensor employing Bi2O3/MgIn2S4 heterojunction for the ultrasensitive detection of heart fatty acid binding protein (H-FABP). The Bi2O3/MgIn2S4 heterojunction, synthesized through in-situ growth of MgIn2S4 on Bi2O3 nanoplates, offers superior attributes including a larger specific surface area and more homogeneous distribution, leading to enhanced sensing sensitivity. The well-matched valence and conduction bands of Bi2O3 and MgIn2S4 effectively suppress the recombination of photogenerated carriers and facilitate electron transfer, resulting in a significantly improved photocurrent signal response. And the presence of the secondary antibody marker (ZnSnO3) introduces steric hindrance that hinders electron transfer between ascorbic acid and the photoelectrode, leading to a reduction in photocurrent signal. Additionally, the competition between the ZnSnO3 marker and the Bi2O3/MgIn2S4 heterojunction material for the excitation light source further diminishes the photocurrent signal response. After rigorous repeatability and selectivity tests, the PEC biosensor exhibited excellent performance, and the linear detection range of the biosensor was determined to be 0.05 pg/mL to 100 ng/mL with a remarkable detection limit of 0.029 pg/mL (S/N = 3).

Integrated Photoelectrochemical-SERS Platform Based on Plasmonic Metal-Semiconductor Heterostructures for Multidimensional Charge Transfer Analysis and Enhanced Patulin Detection

Comprehending the charge transfer mechanism at the semiconductor interfaces is crucial for enhancing the electronic and optical performance of sensing devices. Yet, relying solely on single signal acquisition methods at the interface hinders a comprehensive understanding of the charge transfer under optical excitation. Herein, we present an integrated photoelectrochemical surface-enhanced Raman spectroscopy (PEC-SERS) platform based on quantum dots/metal-organic framework (CdTe/Yb-TCPP) nanocomposites for investigating the charge transfer mechanism under photoexcitation in multiple dimensions. This integrated platform allows simultaneous PEC and SERS measurements with a 532 nm laser. The obtained photocurrent and Raman spectra of the CdTe/Yb-TCPP nanocomposites are simultaneously influenced by variable bias voltages, and the correlation between them enables us to predict the charge transfer pathway. Moreover, we integrate gold nanorods (Au NRs) into the PEC-SERS system by using magnetic separation and DNA biometrics to construct a biosensor for patulin detection. This biosensor demonstrates the voltage-driven ON/OFF switching of PEC and SERS signals, a phenomenon attributed to the plasmon resonance effect of Au NRs at different voltages, thereby influencing charge transfer. The detection of patulin in apples verified the applicability of the biosensor. The study offers an efficient approach to understanding semiconductor-metal interfaces and presents a new avenue for designing high-performance biosensors.

Detection of alkaline phosphatase activity with a CsPbBr3/Y6 heterojunction-based photoelectrochemical sensor

An ultra-sensitive photoelectrochemical (PEC) sensor based on perovskite composite was developed for the determination of alkaline phosphatase (ALP) in human serum. In contrast to CsPbBr3 or Y6 that generated anodic current, the heterojunction of CsPbBr3/Y6 promoted photocarriers to separate and generated cathodic photocurrent. Ascorbic acid (AA) was produced by ALP hydrolyzing L-ascorbic acid 2-phosphate trisodium salt (AAP), which can combine with the holes on the photoelectrode surface, accelerating the transmission of photogenerated carriers, leading to enhanced photocurrent intensity. Thus, the enhancement of PEC current was linked to ALP activity. The PEC sensor exhibits good sensitivity for detection of ALP owing to the unique photoelectric properties of the CsPbBr3/Y6 heterojunction. The detection limit of the sensor was 0.012 U·L-1 with a linear dynamic range of 0.02-2000 U·L-1. Therefore, this PEC sensing platform shows great potential for the development of different PEC sensors.

Self-powered photoelectrochemical immunosensing platform for sensitive CEA detection using dual-photoelectrode synergistic signal amplification

Self-powered photoelectrochemical (PEC) sensing, as an emerging sensing mode, can effectively solve the problems such as weak anti-interference ability and poor signal response of individual photoanode or photocathode sensing. In this work, an ITO/Co-CuInS2 photocathode and ITO/WO3@CdS photoanode based self-powered cathodic PEC immunosensor was developed, which integrated dual-photoelectrode to synergistic amplify the signal for highly sensitive and specific detection of carcinoembryonic antigen (CEA). The self-powered PEC sensor could drive electrons transfer through the difference in Fermi levels between the two photoelectrodes without an external bias voltage. The photoanode was introduced to amplify the photoelectric signal, and the photocathode was only designed for the construction of sensing interfaces. The proposed sensor quantitatively determined the target CEA with the detection limit of 0.23 pg/mL and a linear correlation confine of 0.1 pg/mL ∼100 ng/mL. The constructed immunosensing platform exhibited high sensitivity, satisfactory stability and great biological detection selectivity, providing a feasible and effective strategy for the manufacture of new self-powered sensors in high-performance PEC bioanalytical applications.

Ti3C2@UiO-TCPP Schottky junction photoelectrochemical sensor for detecting alkaline phosphatase through the steric hindrance effect of phosphopeptide

Alkaline phosphatase (ALP) is a major biomarker for clinical diagnosis, but detection methods of ALP are limited in sensitivity and selectivity. In this paper, a novel method for ALP determination is proposed. A photoelectrochemical (PEC) sensor was prepared by growing UiO-tetratopic tetrakis (4-carbox-yphenyl) porphyrin (TCPP) in situ between layered Ti3C2 through a one-pot hydrothermal method. The obtained Schottky heterojunction photoelectric material Ti3C2@UiO-TCPP not only has a large light absorption range but also greatly improves the efficiency of photogenerated electron hole separation and thereby enhances sensitivity for PEC detection. The phosphate group on the phosphorylated polypeptide was utilized to form a Zr-O-P bond with the zirconium ion on UiO-66, and then photocurrent decreases due to the steric hindrance effect of phosphorylated polypeptides, that is, the hindrance of electron transfer between the photoelectric material and a solution. The specific interaction between ALP and phosphorylated polypeptides shears the bond between phosphate and zirconium ion on UiO-66 in the peptides then weakens the hindrance effect and increases the photocurrent, thus realizing ALP detection. The linear range of ALP is 0.03-10,000 U·L-1, and the detection limit is 0.012 U·L-1. The method is highly sensitive and selective, and has been applied in detection of ALP in serum samples.

Ultrasensitive alkaline phosphatase activity assay based on controllable signal probe production coupled with the cathodic photoelectrochemical analysis

A highly sensitive and selective split-type perovskite-based photoelectrochemical (PEC) platform was developed for measuring alkaline phosphatase (ALP) activity in milk and serum samples. ALP in the test sample hydrolyzed 2-phosphate sesquimagnesium salt hydrate (AAPS) in a 96-microwell plate to produce ascorbic acid (AA), a PEC electron donor. The resulting AA, which could preferentially annihilate the photogenerated holes, indirectly reflects ALP activity. The PEC used a cetyltrimethylammonium bromide (CTAB)-functionalized CH₃NH₃PbI₃ (CTAB@CH₃NH₃PbI₃) film as the cathode to monitor the controlled AA production. Due to the excellent photoelectric characteristics of the CH₃NH₃PbI₃ perovskite and the split-type assay, excellent sensitivity and selectivity for ALP detection were obtained. Under the optimum experimental conditions, ALP activity with a limit of detection (LOD) of 2.6 × 10^-4 U/L in a linear dynamic range of 10^-3 ∼ 10² U/L was obtained. With its sensitive, rapid, and high-throughput detection capabilities, this split-type and label-free PEC platform has great potential for use in food and biomedical analysis.

Highly Sensitive Photoelectrochemical Immunosensor Based on Organic Multielectron Donor Nanocomposite as Signal Probe

Organic photoelectric materials with conjugated electron-rich structures and good biocompatibilities have broad application prospects in biosensors. Herein, we report a promising organic photoelectric multielectron donor nanocomposite for highly sensitive PEC immunoassays. Specifically, the organic multielectron donor nanocomposite (DA-ZnTCPP-g-C₃N₄) was prepared from dopamine (DA, polyphenol hydroxyl structure substance), zinc tetracarboxylate porphyrin (ZnTCPP, large p-π conjugated heterocyclic compound), and two-dimensional graphene-like nitrogen carbide (g-C₃N₄) via an amidation reaction. With a multielectron donor structure and photoelectricity, this nanocomposite can achieve sensitization by self-structure without the addition of an electron donor in the test solution. It was utilized to label the carcinoembryonic detection antibody as a immuno-probe (Ab2-DA-ZnTCPP-g-C₃N₄). Meanwhile, the glassy carbon electrode electrodeposited with gold nanoparticles anchoring the capture antibody was used as a PEC immunomatrix (Ab1/DpAu/GCE). The enhanced PEC current, "signal on", was confirmed by the immunosensor via sandwich immunorecognition of a carcinoembryonic antigen (CEA). Under optimal conditions, the as-prepared sensing platform displayed high sensitivity for CEA with a dynamic linear response range from 10 fg·mL^-1 to 1 mg·mL^-1 and a lower detection limit of 3.6 fg·mL^-1. This organic nanocomposite showed good sensitivity and stability in an immunosensing system with a low background. This strategy affords a promising approach for biological applications of organic photoelectric materials.

6-Aza-2-thio-thymine-gold nanoclusters: an excellent candidate in the photoelectrochemical field

The high performance of the photoelectrochemical (PEC) properties of AuNCs can be achieved with 6-aza-2-thio-thymine-AuNCs (ATT-AuNCs) as a photoactive material. The ATT-AuNCs yielded a cathodic photocurrent density as high as 88 μA cm^-2 with O₂ as electron acceptor, which is three orders of magnitude higher than those of other AuNCs in aqueous solutions. Moreover, ATT-AuNCs also show a higher carrier density, shorter Debye length, and smaller depletion layer width than those of reported AuNCs. This work not only reveals the PEC performance and mechanism of ATT-AuNCs, but also establishes a framework for in-depth design and studying the PEC performance of AuNCs.

Brightness Analysis per Moving Particle: In Situ Analysis of Alkaline Phosphatase in Living Cells

In situ quantitative analysis of enzymes such as phosphatase is important to understand a number of involved biological processes ranging from various metabolisms to signal transduction and cellular regulation. In this paper, a novel in situ measurement strategy was proposed to detect alkaline phosphatase (ALP) activity in different locations within single living cells. The principle is based on the measurement of the resonance light scattering brightness ratio (SBR) per moving nanoparticle that forms in an ALP-related chemical reaction. In the method, a novel resonance light scattering correlation spectroscopy (RLSCS) system was developed using two lasers for illumination or two detection channels. Using the gold nanoparticles (AuNPs) as probes, the Au@Ag nanoparticles (Au@Ag NPs) formed due to the ALP-catalyzed hydrolysis of ascorbic acid 2-phosphate (AAP) and the subsequent reduction-deposition reaction of Ag ions that occurred on the AuNPs. The SBR value per moving particle was determined based on the obtained RLS intensity traces and RLSCS curves. The SBR value was found to be not influenced by the intracellular viscosity and size that was confirmed in the experiments. The linear relation between the SBR and ALP activity was established and applied to detect ALP activity and evaluate the inhibition of different drugs. Finally, the method was successfully used to in situ measure ALP activity within living cells. The method overcomes the shortcoming of conventional methods that lack quantitative analysis and are susceptible to intracellular viscosity.

Laser ablative TiO2 and tremella-like CuInS2 nanocomposites for robust and ultrasensitive photoelectrochemical sensing of let-7a

A photoelectrochemical (PEC) biosensor based on a multiple signal amplification strategy was established for highly sensitive detection of microRNA (miRNA). TiO₂ was prepared on the surface of titanium sheet by laser etching to improve its stability and photoelectrical properties, and CuInS₂-sensitized TiO₂ was used to form a superior photoelectrical layer, which realized the initial signal amplification. The electron donor dopamine (DA) was modified to H2 as a signal regulator, which effectively increased the photocurrent signal. To further amplify the signal, an enzyme-free hybridization reaction was implemented. When target let-7a and fuel-DNA (F-DNA) were present, the base of H1 specifically recognized let-7a and forced dopamine@AuNPs-H2 away from the electrode surface. Subsequently, the end base of H1 specifically recognized F-DNA, and let-7a was replaced and recycled to participate in the next cycle. Enzyme-free circulation, as a multifunctional amplification method, ensured the recycling of target molecules. This PEC sensor for let-7a detection showed an excellent linear response from 0.5 to 1000 pM with a detection limit of 0.12 pM. The intra-batch RSD was 3.8% and the recovery was 87.74-108.1%. The sensor was further used for clinical biomolecular monitoring of miRNA, showing excellent quantitative detection capability.

Optically coupled gold nanostructures: plasmon enhanced luminescence from gold nanorod-nanocluster hybrids

Photoluminescent (PL) gold nanoclusters (AuNCs) show many advantages over conventional semiconductor quantum dots, however, their application potential is limited by their relatively low absorption cross-section and quantum yield. Plasmonic enhancement is a common strategy for improving the performance of weak fluorophores, yet in the case of AuNCs this method is still poorly explored. Here a robust synthetic approach to a compact plasmonic nanostructure enhancing significantly the PL of AuNCs is presented. Two gold nanostructures, AuNCs and plasmonic gold nanorods (AuNRs), are assembled in a compact core-shell nanostructure with tunable geometry and optical properties. The unprecedented degree of control over the structural parameters of the nanostructure allows to study the effects of several parameters, such as excitation wavelength, AuNC-AuNR distance, and relative loading of AuNCs per single AuNR. Consequently, a more general method to measure and evaluate enhancement independently of the absolute particle concentrations is introduced. The highest PL intensity enhancement is obtained when the excitation wavelength matches the strong longitudinal plasmonic band of the AuNRs and when the separation distance between AuNCs and AuNRs decreases to 5 nm. The results presented are relevant for the application of AuNCs in optoelectronic devices and bioimaging.

Au nanoclusters-decorated WO3 nanorods for ultrasensitive photoelectrochemical sensing of Hg2+

Ultrasensitive photoelectrochemical sensing of Hg2+ is achieved using Au nanocluster-decorated WO3 nanorods as photoactive materials.

Recent Advances of Nanostructured Materials for Photoelectrochemical Bioanalysis

Nowadays, the emerging photoelectrochemical (PEC) bioanalysis has drawn intensive interest due to its numerous merits. As one of its core elements, functional nanostructured materials play a crucial role during the construction of PEC biosensors, which can not only be employed as transducers but also act as signal probes. Although both chemical composition and morphology control of nanostructured materials contribute to the excellent analytical performance of PEC bioassay, surveys addressing nanostructures with different dimensionality have rarely been reported. In this review, according to classification based on dimensionality, zero-dimensional, one-dimensional, two-dimensional, and three-dimensional nanostructures used in PEC bioanalysis are evaluated, with an emphasis on the effect of morphology on the detection performances. Furthermore, using the illustration of recent works, related novel PEC biosensing patterns with promising applications are also discussed. Finally, the current challenges and some future perspectives in this field are addressed based on our opinions.

Ultrasensitive Photoelectrochemical Biosensor Based on Novel Z-Scheme Heterojunctions of Zn-Defective CdS/ZnS for MicroRNA Assay

The sensitive and accurate detection of microRNA (miRNA) has meaningful values for clinical diagnosis application as an early stage of tumor markers. Herein, a novel photoelectrochemical (PEC) biosensor was developed for the ultrasensitive and highly selective detection of microRNA-122 (miRNA-122) based on a direct Z-scheme heterojunction of Zn vacancy-mediated CdS/ZnS (CSZS-V_Zn). Impressively, the prepared Z-scheme heterojunction nanocomposite with defect level properties could make the photogenerated charges stay at the Zn vacancy defect levels and combine photogenerated holes in the valence bands of CdS, thus significantly achieving a better charge carrier separation efficiency and broadening the absorption of visible light and demonstrating 5-8 times enhancement of PEC response compared to single-component materials. Simultaneously, an exonuclease III (Exo-III)-assisted signal amplification strategy and a strand displacement reaction were combined to improve the conversion efficiency of the target and further increase the detection sensitivity. More importantly, the elaborated biosensor showed ultrasensitive and highly specific detection of the target miRNA-122 over a wide linear range from 10 aM to 100 pM with a low detection limit of 3.3 aM and exhibited enormous potential in the fields of bioanalysis and clinical diagnosis.

AgCu@CuO aerogels with peroxidase-like activities and photoelectric responses for sensitive biosensing

Photoelectrochemical (PEC) enzymatic biosensors integrate the excellent selectivity of enzymes and high sensitivity of PEC bioanalysis, but the drawbacks such as high cost, poor stability, and tedious immobilization of natural enzymes on photoelectrodes severely suppress their applications. AgCu@CuO aerogel-based photoelectrode materials with both remarkable enzyme-like activities and outstanding photoelectric properties were innovatively designed and synthesized to evaluate the activity of xanthine oxidase with a wide linear detection range and a low limit of detection.

Interactions between Two Kinds of Gold Nanoclusters and Calf Thymus Deoxyribonucleic Acid: Directions for Preparations to Applications

Gold nanoclusters (AuNCs) have shown promising applications in biotherapy owing to their ultrasmall size and unique molecular-like properties. In order to better guide the preparations and applications of AuNCs, dihydrolipoic acid-protected AuNCs (DHLA-AuNCs) and glutathione-protected AuNCs (GSH-AuNCs) were selected as models and the interactions between them and calf thymus DNA (ctDNA) were studied in detail. The results showed that there was a small difference in the binding mechanisms and forces between both AuNCs and ctDNA. The quenching mechanisms of both AuNCs to (ctDNA-HO) were completely different. The binding constants indicated that the binding strength between DHLA-AuNCs and ctDNA was greater than those of GSH-AuNCs. The conformation investigations showed that GSH-AuNCs had a greater impact on the conformation of ctDNA, and both AuNCs were more inclined to interact with the A-T base pairs of ctDNA. These results indicate that the surface ligand had a significant effect on the interactions between AuNCs and DNA and might also further affect the applications of AuNCs, and these results could guide the preparations of AuNCs. For DHLA-AuNCs, their good biocompatibility made them a potential candidate for application in imaging, drug treatment, sensing, and so on. The resulting base accumulation of ctDNA and weak interactions made GSH-AuNCs have great potential for application in gene therapy, which was consistent with the current reports on the applications of these two AuNCs. This work has pointed out the directions for the preparations and applications of AuNCs.

Sprayable β-FeSi2 composite hydrogel for portable skin tumor treatment and wound healing

The development of a rapid-forming in-situ sprayable hydrogel with the functions of tumor treatment and wound healing is essential for eliminating residual tumor tissue and promoting wound healing caused by surgical resection. On account of its semiconductor properties, β-FeSi₂ (FS) was widely explored as a thermoelectric material. In this work, FS was first applied as a bioactive material for the application of tissue engineering. Excitedly, we found that FS could be used as a novel antitumor agent. It exhibited excellent photothermal performance, and the released Fe ions could generate •OH under the acidic conditions and excessive H₂O₂ in the tumor microenvironment. Moreover, the sprayable β-FeSi₂-incorporated sodium alginate (FS/SA) hydrogel was prepared as an instant gelation after spraying in situ, contributing to timely tumor-induced skin wound healing and efficiently suppressing tumors through photothermal and chemodynamic therapy (PTT and CDT). Furthermore, the released bioactive Fe and Si ions could promote the migration and differentiation of endothelial cells and the pro-angiogenesis of skin wounds. Accordingly, such sprayable hydrogel played an effective role in emergency wound treatment with the advantage of convenience and portability. Overall, with incorporation of FS into the sprayable FS/SA hydrogel, the composite hydrogel possessed dual functions of tumor therapy and skin wound healing.

Photoelectrochemical Assay Based on SnO2/BiOBr p-n Heterojunction for Ultrasensitive DNA Detection

Herein, a photoelectrochemical (PEC) assay was designed for a highly sensitive DNA determination relying upon the SnO₂/BiOBr p-n heterojunction as a photoactive material and SiO₂ as a signal quencher. Compared with most traditional heterojunctions, the SnO₂/BiOBr p-n heterostructure not only lessened the recombination of the photogenerated electron-hole pairs but also promoted the light-harvesting in the ultraviolet-visible (UV-vis) region, leading to further enhanced photoelectric conversion efficiency and photocurrent, which demonstrated 12.1-fold and 6.4-fold increments versus those of pure SnO₂ and BiOBr, respectively. Additionally, the limited quantity of target DNA (a fragment of p53 gene) could be transformed into abundant output DNA-SiO₂ by employing the Nt·BstNBI enzyme-assisted signal amplification procedure, leading to a highly improved detection sensitivity of the biosensor. Then, output DNA-SiO₂ hybridized with the capture DNA anchored on the modified electrode surface, remarkably diminishing the PEC signal and thus achieving sensitive DNA determination. The elaborated PEC biosensor demonstrated outstanding performance within the linear range between 0.5 fM and 5 nM and a low limit of detection down to 0.18 fM, paving a new way for fabricating heterojunction with exceptional photoactive performance and demonstrating the enormous potential for detecting multitudinous biomarkers in bioanalysis and clinical therapy.

Photoelectrochemical analysis of the alkaline phosphatase activity in single living cells

Conventional photoelectrochemical (PEC) analysis mostly utilizes photoactive material modified planar indium tin oxides (ITOs) to obtain photocurrent responses for the measurement of analytes in solution. In this work, a CdS quantum dot (QD) modified nanopipette was prepared for the PEC analysis of the alkaline phosphatase (ALP) activity in single MCF-7 cells. The nanopipette was filled with ascorbic acid 2-phosphate (AAP) that was egressed outside the nanopipette by electrochemical pumping. Next, AAP was catalyzed by ALP to generate ascorbic acid (AA), which is an efficient electron donor for CdS QDs under illumination. Based on the result that the nanopipette showed a linear photocurrent response to AA, a nearly linear correlation between the photocurrent and the activity of ALP was established. Accordingly, using these CdS QD modified nanopipettes, the ALP activity in single MCF-7 cells was determined to be 0.12 U mL^-1 by PEC analysis. This work does not expand the application of PEC bioanalysis, but offers a new strategy for single cell analysis.

Programmable DNA Circuits for Flexible and Robust Exciton-Plasmon Interaction-Based Photoelectrochemical Biosensing

DNA circuits as one of the dynamic nanostructures can be rationally designed and show amazing geometrical complexity and nanoscale accuracy, which are becoming increasingly attractive for DNA entropy-driven amplifier design. Herein, a novel and elegant exciton-plasmon interaction (EPI)-based photoelectrochemical (PEC) biosensor was developed with the assistance of a programmable entropy-driven DNA amplifier and superparamagnetic nanostructures. Low-abundance miRNA-let-7a as a model can efficiently initiate the operation of the entropy-driven DNA amplifier, and the released output DNAs can open the partially hybridized double-stranded DNA anchored on Fe₃O₄@SiO₂ particles. The liberated Au nanoparticles (NPs)-cDNA can completely hybridize with CdSe/ZnS quantum dots (QDs)-cDNA-1 and result in proportionally decreased photocurrent of CdSe/ZnS QDs-cDNA-1. This unique entropy-driven amplification strategy is beneficial for reducing the reversibility of each step reaction, enables the base sequence invariant and the reaction efficiency improvement, and exhibits high thermal stability and specificity as well as flexible design. These features grant the PEC biosensor with ultrasensitivity and high selectivity. Also, instead of solid-liquid interface assembly for conventional EPI-based PEC biosensors, herein, DNA hybridization in the solution phase enables the improved hybridization efficiency and sensitivity. In addition, superparamagnetic Fe₃O₄@SiO₂ particles further ensure the enhancement of the selectivity and reliability of the as-designed PEC biosensor. Particularly, this single-step electrode modification procedure evidently improves the electrode fabrication efficiency, reproducibility, and stability.

Alkaline Phosphatase-Triggered Etching of Au@FeOOH Nanoparticles for Enzyme Level Assay under Dark-Field Microscopy

In clinical diagnosis, the level of biological enzymes in serum has been generally regarded as markers of human diseases. In this work, a kind of simple and sensitive plasmonic probe (indicated as Au@FeOOH) has been synthesized with the guidance of plasmonic imaging and subsequently developed for the alkaline phosphatase (ALP) level detection under dark-field microscopy (DFM). As a kind of hydrolysis enzyme, ALP can promote the hydrolysis of l-ascorbic acid 2-phosphate to ascorbic acid (AA). AA further acts as a strong reduction reagent for the decomposition of the FeOOH shell, which results in a blue shift of localized surface plasmon resonance spectra and an obvious color change under DFM. RGB analyses show that using a ΔR/G value instead of scattering wavelength or R/G value as the analytical signal, the deviation attributed to the size distribution of the initial Au NPs is greatly suppressed, and a linear range from 0.2 to 6.0 U/L (R² = 0.99) and a limit of detection of 0.06 U/L are acquired with various concentrations of ALP during the detection. Besides, this approach exhibits excellent selectivity in complex biological serum samples, which is expected to be applied for the early diagnosis of clinical diseases by monitoring various biomarkers in the future.

MoSe2/CdSe Heterojunction Destruction by Cation Exchange for Photoelectrochemical Immunoassays with a Controlled-Release Strategy

Herein, a split-type immunoassay strategy instigated by cation exchange (CE) and changing the capacity of an electron donor in an electrolyte solution is optimized, namely, for differentiating the biological-specific binding assay and photoelectrochemical (PEC) analysis. MoSe₂/CdSe, a Z-scheme heterojunction with efficient visible light absorption and a low recombination of carriers, is used as a photoelectrode substrate. Silver ions (Ag⁺) as the initiator of CE are generated by the acidolysis of evenly loaded silver nanoparticles on mesoporous silica nanospheres (MSNs). The theoretical calculation and experimental results confirm that Ag⁺ replaces Cd²⁺ in CdSe and retains the crystal structure of MoSe₂. However, this behavior destroys the perfectly matched heterojunction structure and introduces defects, which led to the reduction of the photocurrent response. In addition, ascorbate oxidase in combination with MSNs can be used as a consumptive agent of the electron donor, which further improves the sensitivity and reliability of the sensor. As a proof of principle, neuron-specific enolase was applied to elucidate the potential application of the PEC immunoassay in clinical diagnosis, and the obtained linear range of the sensor was from 0.0001 to 100 ng/mL with a detection limit of 28 fg/mL (S/N = 3).

Highly Sensitive Homogeneous Electrochemiluminescence Biosensor for Alkaline Phosphatase Detection Based on Click Chemistry-Triggered Branched Hybridization Chain Reaction

Alkaline phosphatase (ALP) has been used as a diagnostic index of clinical diseases since its expression level is closely related to many pathological processes. In this work, a highly sensitive electrochemiluminescence (ECL) method for the determination of ALP based on a click chemistry-induced branched hybridization chain reaction (BHCR) for signal amplification and ultrafiltration technology for the separation of homogeneous amplification products is introduced. ALP can release copper ions from a Cu²⁺/PPi complex by hydrolyzing pyrophosphoric acid, which initiates click chemistry in the system. A BHCR amplification is triggered afterward by the long single-stranded DNA (ssDNA) generated by click chemistry, resulting in a three-dimensional double-stranded DNA (dsDNA) with a large molecular weight. Based on the characteristic that Ru(phen)₃²⁺ can stably insert into the groove of dsDNA, a large amount of Ru(phen)₃²⁺ is retained together with the amplified product after ultrafiltration, and therefore a significantly enhanced ECL signal can be obtained. The test results show that this method can be used for the quantitative determination of ALP ranging from 0.002 to 50 U/L, with a detection limit of 0.7 mU/L. This method has also been confirmed to have good selectivity and anti-interference, and the results of the analysis of the ALP content in the diluted serum samples are satisfactory, showing great application potential in clinical diagnosis.

Enzymatic photoelectrochemical bioassay based on hierarchical CdS/NiO heterojunction for glucose determination

The design and development of a 3D hierarchical CdS/NiO heterojunction and its application in a self-powered cathodic photoelectrochemical (PEC) bioanalysis is introduced. Specifically, NiO nanoflakes (NFs) were in situ formed on carbon fibers via a facile liquid-phase deposition method followed by an annealing step and subsequent integration with CdS quantum dots (QDs). The glucose oxidase (GOx) was then coated on the photocathode to allow the determination of glucose. Under 5 W 410 nm LED light and at a working voltage of 0.0 V (vs. Ag/AgCl), this method can assay glucose concentrations down to 1.77×10^-9 M. The linear range was 5×10^-7 M to 1×10^-3 M, and the relative standard deviation (RSD) was below 5%. The photocathodic biosensor achieved target detection with high sensitivity and selectivity. This work is expected to stimulate more passion in the development of innovative hierarchical heterostructures for advanced self-powered photocathodic bioanalysis. Design of 3D hierarchical CdS/NiO heterojunction and its application in a self-powered cathodic photoelectrochemical (PEC) bioanalysis.

A new photoelectrochemical biosensor based on FeOOH and exonuclease III-aided dual recycling signal amplification for HPV-16 detection

Herein, based on iron oxyhydroxide (FeOOH) as the photoactive material and exonuclease III (exo III)-aided dual recycling signal amplification, a new photoelectrochemical (PEC) biosensor was successfully developed for human papillomavirus-16 (HPV-16) detection with a wide linear range from 0.5 fM to 1 nM and a low detection limit of 0.17 fM.

Development of General Methods for Detection of Virus by Engineering Fluorescent Silver Nanoclusters

Viruses have caused significant damage to the world. Effective detection is required to relieve the impact of viral infections. A biomolecule can be used as a template such as deoxyribonucleic acid (DNA), peptide, or protein, for the growth of silver nanoclusters (AgNCs) and for recognizing a virus. Both the AgNCs and the recognition elements are tunable, which is promising for the analysis of new viruses. Considering that a new virus such as severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) urgently requires a facile sensing strategy, various virus detection strategies based on AgNCs including fluorescence enhancement, color change, quenching, and recovery are summarized. Particular emphasis is placed on the molecular analysis of viruses using DNA stabilized AgNCs (DNA-AgNCs), which detect the virus's genetic material. The more widespread applications of AgNCs for general virus detection are also discussed. Further development of these technologies may address the challenge for facile detection of SARS-CoV-2.

Ratiometric fluorescence determination of alkaline phosphatase activity based on dual emission of bovine serum albumin-stabilized gold nanoclusters and the inner filter effect

A novel and convenient method for the ratiometric fluorescence detection of alkaline phosphatase (ALP) activity was proposed based on dual emission of bovine serum albumin-templated gold nanoclusters (BSA-AuNCs) and the mechanism of the inner filter effect between BSA-AuNCs and p-nitrophenol (PNP). First, ALP catalyzed the hydrolysis of the substrate p-nitrophenyl phosphate (PNPP) to produce PNP. PNP effectively quenched the emission peak of BSA-AuNCs at 410 nm because of the overlap in absorbance feature of PNP and the fluorescence spectrum of BSA-AuNCs, and the peak at 650 nm was almost unaffected. Thus, a sensitive ratiometric method for detection of ALP activity was developed using the fluorescence intensity of BSA-AuNCs at 650 nm as a reference signal. ALP activity versus the ratio of fluorescence intensities at 410 and 650 nm showed good linearity between 0.2 and 5 mU mL^-1 (R² = 0.9931) and high sensitivity with a detection limit of 0.03 mU mL^-1 (S/N = 3). The developed sensing method was successfully applied to investigate ALP inhibitors and detect ALP in serum samples.

Magnetic-Assisted Methylene Blue-Intercalated Amplified dsDNA for Polarity-Switching-Mode Photoelectrochemical Aptasensing

Organic dyes are typically applied as photosensitizers in photoelectrochemical (PEC) cells but have not been reported in polarity-reversal-mode PEC sensors with excellent sensitivity and accuracy. Herein, an elegant and robust PEC biosensor for carcinoembryonic antigen (CEA) has been designed by photocurrent polarity switching of CdTe quantum dots (QDs), which is obtained by embedding methylene blue (MB) into amplified double-stranded DNA (dsDNA) anchored to the superparamagnetic Fe₃O₄@SiO₂. The target-triggered Exo III-assisted cyclic amplification strategy and in situ magnetic enrichment enable the remarkable sensitivity. The extraction of target-analogue single-stranded DNA (output DNA) contributes to high selectivity resulting from the elimination of possible interferences in real samples or matrixes. Particularly, this exclusive polarity-reversal-mode PEC aptasensing can efficiently eliminate the false-positive or false-negative signals, leading to accurate measurements. Moreover, different from the probes and layer-by-layer assembled photoelectric beacons on electrodes in advance, this rational split-type approach is doomed to help the PEC biosensor with additional merits of convenient fabrication, short time consumption, wider linearity, as well as outstanding reproducibility and stability in practical applications. In light of the ability of MB acting as a kind of signal probe in typical electrochemical sensors, certainly, this ingenious design can not only be extended to a wide variety of target monitoring but also provide new ideas for the construction of high-performance electrochemical and PEC biosensors.

In Situ Generation of Regularly Ordered 2D Ultrathin Covalent Organic Framework Films for Highly Sensitive Photoelectrochemical Bioanalysis

Developing new photoactive materials and electrode preparation technology with high stability, repeatability, easy fabrication, and a low electron-hole recombination rate is promising for ideal photoelectrochemical (PEC) biosensors, but it remains a great challenge. Here, a porous and crystalline oriented two-dimensional (2D) ultrathin covalent organic framework film (D-TA COF film) was formed in situ on indium-doped tin oxide (ITO) substrates under very mild conditions. The structure and morphology of D-TA COF film were characterized by means of Raman spectroscopy, X-ray photoelectron spectroscopy, scanning electron microscopy, and powder X-ray diffraction. Compared with the randomly oriented D-TA COF powder drop-coated on ITO, the photocurrent of the D-TA COF film grown on the ITO surface in situ achieved as high as ∼333-fold increase. This photocurrent can be further amplified by O₂ (acting as electron acceptors). Benefiting from the fabrication in situ, D-TA COF film also exhibited tough adhesion, assuring the film was difficult to separate from the electrode. Accordingly, D-TA COF film was applied as the photoactive material to build a PEC biosensor for H₂O₂ detection based on coupling with large amounts of catalase (CAT) through simple adsorption. The introduced CAT catalyzed the decomposition of H₂O₂ to O₂, leading to an enhancement of the photocurrent response. As a result, a "signal-on" PEC biosensor was fabricated with good sensitivity, rapid response, and high stability, and it can also detect H₂O₂ released from living cells. Taking into account these advantages, the D-TA COF film is expected to be an ideal photoactive material to construct various PEC biosensors, which as far as we know have not been reported.

Electrochemical detection of viruses and antibodies: A mini review

Near patient detection of viral infection represents a powerful approach for the control of emerging threats to global health. Moreover, the ability to identify individuals who have contracted the disease and developed antibodies that confer immunity is central to a return to normal daily activities. This review presents some of the recent advances in electrochemical sensors for the detection of viruses and their associated antibody profiles. Given the speed, portability, sensitivity and selectivity achieved using electrochemical detection, these sensor systems hold the promise of transformative change in clinical practice.

A near-infrared light-controlled, ultrasensitive one-step photoelectrochemical detection of dual cell apoptosis indicators in living cancer cells

The proposed near-infrared (NIR) light-controlled, one-step photoelectrochemical (PEC) strategy could simultaneously detect cell apoptosis indicators, phosphatidylserine (Pho) and sodium potassium adenosine triphosphatase (Sat), on living cancer cells.