Direct Loading and Tunable Release of Antibiotics from Polyelectrolyte Multilayers To Reduce Bacterial Adhesion and Biofilm Formation

Fabrication and in vitro investigation of hyperbranched poly-lysine-grafted warp knitted polypropylene sling for potential treatment of stress urinary incontinence

Polypropylene (PP) sling implantation is the most commonly performed procedure for women with stress urinary incontinence (SUI). However, concerns have arisen regarding complications caused by slings, including the common issue of erosion, which can be attributed to various factors such as the body's response and bacterial contamination. To address these concerns, we have developed a rectangular mesh self-locking edge sling with a large pore size and lightweight design. Promising results have been obtained from preliminary in vivo mechanical reliability tests, including uniaxial tensile tests. In comparative in vitro fixed load tensile tests and simulated Tension-free Vaginal Tape (TVT) and Transobturator Vaginal Tape inside-out (TVT-O) technique tests using commercial slings, our sling demonstrated less transverse wrinkling. Both slings achieved an effective porosity of over 45% under the TVT technique. However, the commercial sling experienced a significant reduction in effective porosity during the TVT-O technique, whereas our sling maintained a stable effective porosity with minimal wrinkling. Furthermore, we successfully developed cationic hydration rejection-driven antibacterial-anti-fouling coatings on the surface of our sling by grafting hyperbranched poly-lysine (HBPL) mediated by polynorepinephrine. The HBPL coating imparts a positive charge and hydrophilicity to the sling, resulting in elevated bactericidal activity and reducing protein adhesion. An optimal grafting concentration of 20 mg mL-1 was selected, confirming the stability and biocompatibility of the sling coating. This coating is expected to reduce the likelihood of postoperative erosion. Overall, our research represents significant advancements in improving the safety and performance of PP slings for stress urinary incontinence, potentially leading to a reduction in complications following surgery.

Novel Methacrylate-Based Multilayer Nanofilms with Incorporated FePt-Based Nanoparticles and the Anticancer Drug 5-Fluorouracil for Skin Cancer Treatment

Despite medical advances, skin-associated disorders continue to pose a unique challenge to physicians worldwide. Skin cancer is one of the most common forms of cancer, with more than one million new cases reported each year. Currently, surgical excision is its primary treatment; however, this can be impractical or even contradictory in certain situations. An interesting potential alternative could lie in topical treatment solutions. The goal of our study was to develop novel multilayer nanofilms consisting of a combination of polyhydroxyethyl methacrylate (PHEMA), polyhydroxypropyl methacrylate (PHPMA), sodium deoxycholate (NaDOC) with incorporated superparamagnetic iron–platinum nanoparticles (FePt NPs), and the potent anticancer drug (5-fluorouracil), for theranostic skin cancer treatment. All multilayer systems were prepared by spin-coating and characterised by atomic force microscopy, infrared spectroscopy, and contact angle measurement. The magnetic properties of the incorporated FePt NPs were evaluated using magnetisation measurement, while their size was determined using transmission electron microscopy (TEM). Drug release performance was tested in vitro, and formulation safety was evaluated on human-skin-derived fibroblasts. Finally, the efficacy for skin cancer treatment was tested on our own basal-cell carcinoma cell line.

Multi-Stimulus Responsive Multilayer Coating for Treatment of Device-Associated Infections

Antibacterial coating with antibiotics is highly effective in avoiding device-associated infections (DAIs) which is an unsolved healthcare problem that causes significant morbidity and mortality rates. However, bacterial drug resistance caused by uncontrolled release of antibiotics seriously restricts clinical efficacy of antibacterial coating. Hence, a local and controlled-release system which can release antibiotics in response to bacterial infected signals is necessary in antibacterial coating. Herein, a multi-stimulus responsive multilayer antibacterial coating was prepared through layer-by-layer (LbL) self-assembly of montmorillonite (MMT), chlorhexidine acetate (CHA) and Poly(protocatechuic acid-polyethylene glycol 1000-bis(phenylboronic acid carbamoyl) cystamine) (PPPB). The coating can be covered on various substrates such as cellulose acetate membrane, polyacrylonitrile membrane, polyvinyl chloride membrane, and polyurethane membrane, proving it is a versatile coating. Under the stimulation of acids, glucose or dithiothreitol, this coating was able to achieve controlled release of CHA and kill more than 99% of Staphylococcus aureus and Escherichia coli (4 × 10⁸ CFU/mL) within 4 h. In the mouse infection model, CHA releasing of the coating was triggered by infected microenvironment to completely kill bacteria, achieving wounds healing within 14 days.

Recent progress in Tannic Acid-driven antimicrobial/antifouling surface coating strategies

Medical devices and surgical implants are a necessary part of tissue engineering and regenerative medicines. However, the biofouling and microbial colonization on the implant surface continues to be a major...

Controlled bacteriostasis of tea polyphenol loaded ultrahigh molecular weight polyethylene with high crosslink density and oxidation resistance for total joint replacement

To avoid catastrophic bacterial infection in prosthesis failure, ultrahigh molecular weight polyethylene (UHMWPE), a common bearing material of artificial joints, has been formulated with antibiotics to eliminate bacteria locally at the implant site. However, the pressing issues regarding cytotoxic effects and evolution of drug resistant bacteria necessitates the development of bio-friendly bacteriostat with long bacteriostatic efficacy. Herein, tea polyphenol extracted from nature source was introduced in UHMWPE as a biogenic antimicrobial. Controlled antimicrobial activity was achieved by chemical crosslinking to regulate the release of the tea polyphenol. In addition, the crosslinking efficiency of UHMWPE blends with high loaded tea polyphenol was significantly improved in comparison to radiation crosslinking. The immobilized tea polyphenols also enhanced the oxidation stability of the UHMWPE, which is essential to prolong the service life in vivo and the storage time in vitro. The blends presented good biocompatibility, despite cell repellent on the highly crosslinked surface. Chemically crosslinked tea polyphenol/UHMWPE exhibited feasible properties for total joint implants, which is promising for clinical application.

Reversible antibiotic loading and pH-responsive release from polymer brushes on contact lenses for therapy and prevention of corneal infections

Corneal infection is an important cause of corneal damage and vision loss. In this work, polyhydroxy antibiotics were grafted onto polymer brush-modified contact lenses through dynamic chemical bonds between polyphenolic hydroxyls and phenylboronic acid. Both in vitro and in vivo antibacterial tests demonstrated great promise in the prevention of bacterial keratitis, which could be attributed to the enhanced retention time and drug bioavailability.

Molecular dynamics model for the antibactericity of textured surfaces

An original model has been developed for the initial stage of bacterial adhesion on textured surfaces. Based on molecular dynamics, the model describes contact between individual bacterial cells in a planktonic state and a surface, accounting for both the mechanical properties of the cells and the physico-chemical mechanisms governing interaction with the substrate. Feasibility of the model is assessed via comparison with experimental results of bacterial growth on stainless steel substrates textured with ultrashort laser pulses. Simulations are performed for two different bacterial species, Staphylococcus aureus and Escherichia coli, on two distinct surface types characterised by elongated ripples and isolated nanopillars, respectively. Calculated results are in agreement with experiment outcomes and highlight the role of mechanical stresses within the cell wall due to deformation upon interaction with the substrate, creating unfavourable conditions for bacteria during the initial phases of adhesion. Furthermore, the flexibility of the model provides insight into the intricate interplay between topography and the physico-chemical properties of the substrate, pointing to a unified picture of the mechanisms underlying bacterial affinity to a textured surface.

A mussel-bioinspired multi-functional hyperbranched polymeric coating with integrated antibacterial and antifouling activities for implant interface modification

On the basis of a function integrating strategy, a mussel-inspired hyperbranched polymeric coating with antibacterial and antifouling properties was ingeniously designed and synthesized for the interface modification of implants.

A dual-functional implant with an enzyme-responsive effect for bacterial infection therapy and tissue regeneration

Biomaterial-associated bacterial infection is one of the major causes of implant failure. The treatment of such an implant infection typically requires the elimination of bacteria and acceleration of tissue regeneration around implants simultaneously. To address this issue, an ideal implanted material should have the dual functions of bacterial infection therapy and tissue regeneration at the same time. Herein, an enzyme-responsive nanoplatform was fabricated in order to treat implant-associated bacterial infection and accelerate tissue regeneration in vivo. Firstly, Ag nanoparticles were pre-encapsulated in mesoporous silica nanoparticles (MSNs) by a one-pot method. Then, poly-l-glutamic acid (PG) and polyallylamine hydrochloride (PAH) were assembled by the layer-by-layer (LBL) assembly technique on MSN-Ag to form LBL@MSN-Ag nanoparticles. Furthermore, the LBL@MSN-Ag nanoparticles were deposited on the surface of polydopamine-modified Ti substrates. PG is a homogeneous polyamide composed of an amide linkage, which can be degraded by glutamyl endonuclease secreted by Staphylococcus aureus. Inductively coupled plasma spectroscopy (ICP) results proved that the LBL@MSN-Ag particles show a significant enzyme responsive release of Ag ions. Furthermore, results of antibacterial experiments in vitro showed that the Ti substrates modified with an LBL@MSN-Ag nanocoating presented an excellent antibacterial effect. As for an animal experiment in vivo, in a bacterium infected femur-defect rat model, the modified Ti implants effectively treated bacterial infection. More importantly, the results of micro-CT, haematoxylin-eosin staining and Masson's trichrome staining demonstrated that the modified Ti implants significantly promoted the formation of new bone tissue after implantation for 4 weeks. The present system paves the way for developing the next generation of implants with the functions of treating bacterial infection and promoting tissue regeneration.

Surface modification approaches for prevention of implant associated infections

In this highlight, we summarize the surface modification approaches for development of infection-resistant coatings for biomedical devices and implants. We discuss the relevant key and highly cited research that have been published over the last five years which report the generation of infection-resistant coatings. An important strategy utilized to prevent bacterial adhesion and biofilm formation on device/implant surface is anti-adhesive protein repellant polymeric coatings based on polymer brushes or highly hydrated hydrogel networks. Further, the attachment of antimicrobial agents that can efficiently kill bacteria on the surface while also prevent bacterial adhesion on the surface is also investigated. Other approaches include the incorporation of antimicrobial agents to the surface coating resulting in a depot of bactericides which can be released on-demand or with time to prevent bacterial colonization on the surface that kill the adhered bacteria on the surface to make surface infection resistant.

Quantification Methods for Textile-Adhered Bacteria: Extraction, Colorimetric, and Microscopic Analysis

Quantification of bacteria adhered on porous, multi-layered fibers is a challenging task. The goal of this study is to compare different assessment procedures on counting textile-adhered bacteria, and to guide relevant analytical techniques. Three different methods were compared in measuring the amount of Escherichia coli (E. coli) adhered to polymeric film and fibrous nonwovens. In the extraction method, the adhered bacteria were released with the assistance of surfactant/enzyme, where the measurement was rather reproducible. For colorimetric method, stained bacteria enabled direct visualization without needing to detach cells from the surface, yet the linearity of color absorbency to cell counts was limited. The microscopic analysis provided direct observation of bacterial distribution over the surface, but accurate quantification was not possible for porous, fibrous surfaces. This study intends to help choosing a suitable test method to accurately quantify the textile-adhered bacteria, as well as broadly impact the research on anti-bioadhesive surfaces.

Preventing S. aureus biofilm formation on titanium surfaces by the release of antimicrobial β-peptides from polyelectrolyte multilayers

Staphylococcus aureus infections represent the major cause of titanium based-orthopaedic implant failure. Current treatments for S. aureus infections involve the systemic delivery of antibiotics and additional surgeries, increasing health-care costs and affecting patient's quality of life. As a step toward the development of new strategies that can prevent these infections, we build upon previous work demonstrating that the colonization of catheters by the fungal pathogen Candida albicans can be prevented by coating them with thin polymer multilayers composed of chitosan (CH) and hyaluronic acid (HA) designed to release a β-amino acid-based peptidomimetic of antimicrobial peptides (AMPs). We demonstrate here that this β-peptide is also potent against S. aureus (MBPC = 4 μg/mL) and characterize its selectivity toward S. aureus biofilms. We demonstrate further that β-peptide-containing CH/HA thin-films can be fabricated on the surfaces of rough planar titanium substrates in ways that allow mammalian cell attachment and permit the long-term release of β-peptide. β-Peptide loading on CH/HA thin-films was then adjusted to achieve release of β-peptide quantities that selectively prevent S. aureus biofilms on titanium substrates in vitro for up to 24 days and remained antimicrobial after being challenged sequentially five times with S. aureus inocula, while causing no significant MC3T3-E1 preosteoblast cytotoxicity compared to uncoated and film-coated controls lacking β-peptide. We conclude that these β-peptide-containing films offer a novel and promising localized delivery approach for preventing orthopaedic implant infections. The facile fabrication and loading of β-peptide-containing films reported here provides opportunities for coating other medical devices prone to biofilm-associated infections. STATEMENT OF SIGNIFICANCE: Titanium (Ti) and its alloys are used widely in orthopaedic devices due to their mechanical strength and long-term biocompatibility. However, these devices are susceptible to bacterial colonization and the subsequent formation of biofilms. Here we report a chitosan and hyaluronic acid polyelectrolyte multilayer-based approach for the localized delivery of helical, cationic, globally amphiphilic β-peptide mimetics of antimicrobial peptides to inhibit S. aureus colonization and biofilm formation. Our results reveal that controlled release of this β-peptide can selectively kill S. aureus cells without exhibiting toxicity toward MC3T3-E1 preosteoblast cells. Further development of this polymer-based coating could result in new strategies for preventing orthopaedic implant-related infections, improving outcomes of these titanium implants.

Zn-incorporation with graphene oxide on Ti substrates surface to improve osteogenic activity and inhibit bacterial adhesion

The poor osseointegration and postoperative bacterial infection are prominently responsible for the failure of titanium (Ti)-based implant in clinic. To address above issues, methacryloyl modified graphene oxide (GOMA) as zinc ions (Zn²⁺ ) reservoir and release platform was fabricated on the Ti substrates with cathode electrophoresis deposition (EPD). Afterward, phenylboronic acid (PBA) functionalization methacryloyl-gelatin (GelMA-PBA) was reacting with GOMA through in situ free-radical polymerization to prepare GO-Zn/GelMA-PBA coating. The obtained coating was confirmed by scanning electron microscopy, X-ray photoelectron spectroscopy, and Zn ions release property, respectively. in vitro cellular experiments including cell activity, alkaline phosphatase, collagen secretion, extracellular matrix (ECM) mineralization, osteogenic genes and proteins, revealed that GO-Zn/GelMA-PBA coating was beneficial for enhancing the adhesion, proliferation, and differentiation of osteoblasts. The positive results were related to the existence of gelatin, formation of boronic ester between PBA groups, and carbohydrates of osteoblasts surface. Meanwhile, antibacterial assay against Staphylococcus aureus and Pseudomonas aeruginosa confirmed that GO-Zn/GelMA-PBA coating on Ti substrates had superior antibacterial capacity, availably inhibited the bacterial adhesion, and prevented formation of biofilm. Hence, the study provides a promising strategy for designing pro-osteogenesis and antibacterial coating on Ti substrates for orthopedic applications.

Polysaccharide Thin Solid Films for Analgesic Drug Delivery and Growth of Human Skin Cells

Chronic wounds not only lower the quality of patient's life significantly, but also present a huge financial burden for the healthcare systems around the world. Treatment of larger wounds often requires the use of more complex materials, which can ensure a successful renewal or replacement of damaged or destroyed tissues. Despite a range of advanced wound dressings that can facilitate wound healing, there are still no clinically used dressings for effective local pain management. Herein, alginate (ALG) and carboxymethyl cellulose (CMC), two of the most commonly used materials in the field of chronic wound care, and combination of ALG-CMC were used to create a model wound dressing system in the form of multi-layered thin solid films using the spin-assisted layer-by-layer (LBL) coating technique. The latter multi-layer system was used to incorporate and study the release kinetics of analgesic drugs such as diclofenac and lidocaine at physiological conditions. The wettability, morphology, physicochemical and surface properties of the coated films were evaluated using different surface sensitive analytical tools. The influence of in situ incorporated drug molecules on the surface properties (e.g., roughness) and on the proliferation of human skin cells (keratinocytes and skin fibroblasts) was further evaluated. The results obtained from this preliminary study should be considered as the basis for the development "real" wound dressing materials and for 3D bio-printing applications.

Strategically prolonged release of multiple antibacterial components from a thin film coating for synergistic effects against Staphylococcus aureus infections

Biomaterial-associated infections (BAIs) remain a major challenge in clinical surgery because they can potentially cause serious disabilities in patients.

Design of smart targeted and responsive drug delivery systems with enhanced antibacterial properties

The use of antibiotics has been an epoch-making invention in the past few decades for the treatment of infectious diseases. However, the intravenous injection of antibiotics lacking responsiveness and targeting properties has led to low drug utilization and high cytotoxicity. More importantly, it has also caused the development and spread of drug-resistant bacteria due to repeated medication and increased dosage. The differences in the microenvironments of the bacterial infection sites and normal tissues, such as lower pH, high expression of some special enzymes, hydrogen peroxide and released toxins, etc., are usually used for targeted and controlled drug delivery. In addition, bacterial surface charges, antigens and the surface structures of bacterial cell walls are all different from normal tissue cells. Based on the special bacterial infection microenvironments and bacteria surface properties, a series of drug delivery systems has been constructed for highly efficient drug release. This review summarizes the recent progress in targeted and responsive drug delivery systems for enhanced antibacterial properties.

Antiadhesive and antibacterial properties of pillar[5]arene-based multilayers

A new type of coating, based on carboxylato-pillar[5]arene/poly(allylamine hydrochloride) multilayer films, for the sustained release of antibiotics with in vitro antiadhesive and antimicrobial activity against Gram-positive and Gram-negative bacteria is described.

Inhibiting Pathogen Surface Adherence by Multilayer Polyelectrolyte Films Functionalized with Glucofuranose Derivatives

Inhibiting pathogenic bacterial adherence on surfaces is an ongoing challenge to prevent the development of biofilms. Multilayer polyelectrolyte films are feasible antibacterial materials. Here, we have designed new films made of carbohydrate polyelectrolytes to obtain antibacterial coatings that prevent biofilm formation. The polyelectrolyte films were constructed from poly(maleic anhydride- alt-styrene) functionalized with glucofuranose derivatives and quaternized poly(4-vinylpyridine) N-alkyl. These films prevent Pseudomonas aeruginosa and Salmonella Typhimurium, two important bacterial contaminants in clinical environments, from adhering to surfaces. When the film was composed of more than 10 layers, the bacterial population was greatly reduced, while the bacteria remaining on the film were morphologically damaged, as atomic force microscopy revealed. The antibacterial capacity of the polyelectrolyte films was determined by the combination of thickness, wettability, surface energy, and most importantly, the conformation that polyelectrolytes adopt the function of nature of the carbohydrate group. This polyelectrolyte film constitutes the first green approach to preventing pathogenic bacterial surface adherence and proliferation without killing the bacterial pathogen.

Covalent layer-by-layer films: chemistry, design, and multidisciplinary applications

Covalent layer-by-layer (LbL) assembly is a powerful method used to construct functional ultrathin films that enables nanoscopic structural precision, componential diversity, and flexible design. Compared with conventional LbL films built using multiple noncovalent interactions, LbL films prepared using covalent crosslinking offer the following distinctive characteristics: (i) enhanced film endurance or rigidity; (ii) improved componential diversity when uncharged species or small molecules are stably built into the films by forming covalent bonds; and (iii) increased structural diversity when covalent crosslinking is employed in componential, spacial, or temporal (labile bonds) selective manners. In this review, we document the chemical methods used to build covalent LbL films as well as the film properties and applications achievable using various film design strategies. We expect to translate the achievement in the discipline of chemistry (film-building methods) into readily available techniques for materials engineers and thus provide diverse functional material design protocols to address the energy, biomedical, and environmental challenges faced by the entire scientific community.

N-halamine-based multilayers on titanium substrates for antibacterial application

Bacterial infection is one of the most severe postoperative complications leading to clinical orthopedic implants failure. To improve the antibacterial property of titanium (Ti) substrates, a bioactive coating composed of chitosan-1-(hydroxymethyl)- 5,5-dimethylhydantoin (Chi-HDH-Cl) and gelatin (Gel) was fabricated via layer-by-layer (LBL) assembly technique. The results of Fourier transform infrared spectroscopy (FTIR), nuclear magnetic resonance (¹HNMR) and X-ray photoelectron spectroscopy (XPS) showed that Chi-HHD-Cl conjugate was successfully synthesized. Scanning electron microscopy (SEM), atomic force microscope (AFM) and water contact angle measurements were employed to monitor the morphology, roughness changes and surface wettability of Ti substrates, which proved the multilayers coating formation. Antibacterial assay against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) revealed that the Gel/Chi-HDH-Cl modified Ti substrates most efficiently inhibited the adhesion and growth of bacteria. Meanwhile, in vitro cellular tests confirmed that Gel/Chi-HDH-Cl multilayers had no obvious cytotoxicity to osteoblasts. The study thus provides a promising method to fabricate antibacterial Ti-based substrates for potential orthopedic application.

Flower-like Surface of Three-Metal-Component Layered Double Hydroxide Composites for Improved Antibacterial Activity of Lysozyme

Microbes play an important function in our lives, while some pathogenic bacteria are responsible for many infectious diseases, food safety, and ecological pollution. Layered double hydroxide (LDH) is a kind of natural two-dimensional material and has been applied in many fields. Lysozyme is a green natural antibacterial agent, while the antimicrobial activity of lysozyme is not as good as antibiotics. We use a different ratio of cations to tune the morphology of LDH covered with lysozyme to enhance the antibacterial ability of lysozyme. We synthesize MgAl-LDH, ZnAl-LDH, and ZnMgAl-LDH covered with lysozyme, characterize the structure and morphology, test the antibacterial in culture media, and evaluate the biotoxicity in vitro and in vivo. The flower-like structure of ZnMgAl-LDH has a rough surface, covered with lysozyme with a perfect ring, and presents good antibaterial properties and promotes wound healing of mice. The bloom flower structure of ZnMgAl-LDH can enhance the loading rate of lysozyme; meanwhile, the rougher surface can adhere more bacteria, so lyso@ZnMgAl-LDH presents better antibacterial activity than the binary LDHs.

Spontaneous Biomacromolecule Absorption and Long-Term Release by Graphene Oxide

Biomacromolecule loading is the popular research in the biomedical field. To control the loading amount and releasing profile, various materials and fabrication techniques were developed. In this study, layer-by-layer assembly of multilayer films between collagen (Col) and graphene oxide (GO) was used to control the release of the loading molecule. By mixing GO into the system, ovalbumin (OVA) can be spontaneously adsorbed onto the GO sheet (denoted as GO/OVA) via the hydrophobic interaction. Two kinds of multilayer films (Col/GO/OVA and Col/GO/OVA) were fabricated. The thickness growth curve, quantitative of each layer adsorption, film morphology, stability, cell viability, and OVA release from multilayer films were investigated. The result has shown excellent film stability, macromolecule loading, and sustained release because of GO ability.

Role of poly-beta-amino-esters hydrolysis and electrostatic attraction in gentamicin release from layer-by-layer coatings

Layer-by-layer (LbL) deposition is a versatile technique that has been employed in numerous industrial applications i.e. biomaterials, drug delivery and electronics to confer peculiar properties to the system. When LbL is employed for drug delivery, the active molecule is sandwiched between layers of polyelectrolytes and the release is controlled by the diffusion of the drug through the layers and the possible hydrolysis of the coating (delamination). Poly-beta-amino-esters (PBAEs) are a class of hydrolysable polyelectrolytes that have been widely used in DNA delivery and for LbL on medical devices. Their use allowed the controlled release of antibiotics and other bioactive compounds from the surface of medical devices without cytotoxic effects. The general accepted consensus is that drug released from LbL coating assembled using PBAEs is the results of the polymer hydrolysis; however, no attention has been paid to the role of the electrostatic attraction between PBAE and the other polyelectrolyte utilised in the LbL assembly. In this work, we prepared LbL coatings on the surface of silica nanoparticles entrapping gentamicin as model drug and demonstrated that the drug release from PBAEs containing LbL coatings is predominantly controlled by the electrostatic attraction between opposite charged electrolytes. The positive charge of PBAE decreased from pH = 5 to pH = 7.4 while alginate negative charges remained unchanged in this pH range while PBAE hydrolysis kinetics was faster, as determined with Gel Permeation Chromatography (GPC), in acidic conditions. When PBAE were employed in the LbL construct higher levels of drug were released at pH = 7.4 than at pH = 5; additionally, replacing PBAE with chitosan (the charge of chitosan is not influenced in this pH range) resulted in comparable gentamicin release kinetics at pH = 5.

Recent developments in smart antibacterial surfaces to inhibit biofilm formation and bacterial infections

Since their development over 70 years, antibiotics are still the most effective strategy to treat bacterial biofilms and infections.

Bacterial self-defense antibiotics release from organic-inorganic hybrid multilayer films for long-term anti-adhesion and biofilm inhibition properties

Implant-associated bacterial infections pose serious medical and financial issues due to the colonization and proliferation of pathogens on the surface of the implant. The as-prepared traditional antibacterial surfaces can neither resist bacterial adhesion nor inhibit the development of biofilm over the long term. Herein, novel (montmorillonite/poly-l-lysine-gentamicin sulfate)8 ((MMT/PLL-GS)8) organic-inorganic hybrid multilayer films were developed to combine enzymatic degradation PLL for on-demand self-defense antibiotics release. Small molecule GS was loaded into the multilayer films during self-assembly and the multilayer films showed pH-dependent and linear growth behavior. The chymotrypsin- (CMS) and bacterial infections-responsive film degradation led to the peeling of the films and GS release. Enzyme-responsive GS release exhibited CMS concentration dependence as measured by the size of the inhibition zone and SEM images. Notably, the obtained antibacterial films showed highly efficient bactericidal activity which killed more than 99.9% of S. aureus in 12 h. Even after 3 d of incubation in S. aureus, E. coli or S. epidermidis solutions, the multilayer films exhibited inhibition zones of more than 1.5 mm in size. Both in vitro and in vivo antibacterial tests indicated good cell compatibility, and anti-inflammatory, and long-term bacterial anti-adhesion and biofilm inhibition properties.

Bacterial infection microenvironment-responsive enzymatically degradable multilayer films for multifunctional antibacterial properties

The adhesion of bacteria is one of the most important stages in biofilm formation and bacterial infection. Once bacteria have adhered to a biomaterial surface, it is hard to eliminate them, and bacterial growth and infection are inevitable. In the current study, we have designed and constructed enzymatically degradable (hyaluronic acid/chitosan)n-(hyaluronic acid/polylysine)n ((HA/CHI)n-(HA/PLL)n) composite multilayer films via a layer-by-layer self-assembly method. Spectroscopic ellipsometry and scanning electron microscopy cross section measurements showed the exponential growth behavior of (HA/CHI)10-(HA/PLL)10 multilayer films (∼2 μm). The increased secretion of hyaluronidase and chymotrypsin in the bacterial infection microenvironment led to the fast degradation of the outer (PLL/HA)n multilayer films in the first 24 h. Enzymatic degradation of the multilayer films efficiently reduced the adhesion of both Staphylococcus aureus and Escherichia coli (>99%). Bacterial live/dead staining demonstrated the bactericidal action of the remaining bottom (CHI/HA)n multilayer films against the two kinds of bacteria. In vivo subcutaneous tests on New Zealand white rabbits, wound appearance and histopathology analysis showed that the implantation of composite multilayer film-modified PDMS promoted wound healing and the materials demonstrated a self-defense antibacterial effect. The material demonstrated both anti-adhesive and bactericidal properties and could be used to modify biomedical implants.

Polyelectrolyte Multilayer Nanocoating Dramatically Reduces Bacterial Adhesion to Polyester Fabric

Bacterial adhesion to textiles is thought to contribute to odor and infection. Alternately exposing polyester fabric to aqueous solutions of poly(diallyldimethylammonium chloride) (PDDA) and poly(acrylic acid) (PAA) is shown here to create a nanocoating that dramatically reduces bacterial adhesion. Ten PDDA/PAA bilayers (BL) are 180 nm thick and only increase the weight of the polyester by 2.5%. The increased surface roughness and high degree of PAA ionization leads to a surface with a negative charge that causes a reduction in adhesion of Staphylococcus aureus by 50% when compared to uncoated fabric, after rinsing with sterilized water, because of electrostatic repulsion. S. aureus bacterial adhesion was quantified using bioluminescent radiance measured before and after rinsing, revealing 99% of applied bacteria were removed with a ten bilayer PDDA/PAA nanocoating. The ease of processing, and benign nature of the polymers used, should make this technology useful for rendering textiles antifouling on an industrial scale.

A self-defensive antibacterial coating acting through the bacteria-triggered release of a hydrophobic antibiotic from layer-by-layer films

Drug delivery systems play important roles in the construction of antibacterial coatings on the surfaces of biomaterials. However, excessive release of antibiotics in the environment can lead to the generation of resistant bacteria. A methoxy poly(ethylene glycol)-poly(ε-caprolactone)-chitosan (MPEG-PCL-CS) block polymer was prepared through covalent grafting of CS onto MPEG-PCL. MPEG-PCL-CS micelles were prepared and showed a high load capacity for the hydrophobic antibiotic triclosan (TCA) (∼5 wt%). Multilayer films were constructed through self-assembling TCA/MPEG-PCL-CS cationic micelles with poly(acrylic acid) (PAA). Transmission and scanning electron microscopy analyses confirmed the presence of micelles on the surface (20-40 nm). As barriers for the antibiotic, the (TCA/MPEG-PCL-CS)/PAA multilayer films contained a high load of TCA (255 μg cm-2). Importantly, the multilayer films showed both bacteria-triggered and pH-responsive release properties and can be used as self-defensive antibacterial coatings. Bacterial adhesion caused a local acidic environment and altered the permeability of the multilayer films, promoting drug release. Both in vitro and in vivo antibacterial tests indicated a high bactericidal activity of drug-loaded multilayer films against both E. coli and S. aureus.

Biofunctionalization of surfaces using polyelectrolyte multilayers

Biomaterials play a central role in modern strategies in regenerative medicine and tissue engineering to restore the structure and function of damaged or dysfunctional tissue and to direct cellular behavior. Both biologically derived and synthetic materials have been extensively explored in this context. However, most materials when implanted into living tissue initiate a host response. Modern implant design therefore aims to improve implant integration while avoiding chronic inflammation and foreign body reactions, and thus loss of the intended implant function. Directing these processes requires an in-depth understanding of the immunological processes that take place at the interface between biomaterials and the host tissue. The physicochemical properties of biomaterial surfaces (charge, charge density, hydrophilicity, functional molecular domains, etc.) are decisive, as are their stiffness, roughness and topography. This review outlines specific strategies, using polyelectrolyte multilayers to modulate the interactions between biomaterial surfaces and biological systems. The described coatings have the potential to control the adhesion of proteins, bacteria and mammalian cells. They can be used to decrease the risk of bacterial infections occurring after implantation and to achieve better contact between biological tissue and implants. In summary, these results are important for further development and modification of surfaces from different medical implants.

Construction of a temperature-responsive terpolymer coating with recyclable bactericidal and self-cleaning antimicrobial properties

Once a biomedical implant is implanted into a human body, proteins and bacteria can easily colonize the implant, and subsequently, a biofilm can grow on the surface. A biofilm can protect the inhabiting bacteria against macrophages and neutrophil cell attack from the host immune system. The most important issue for artificial antibacterial surfaces is the accumulation of the bacteria corpse after they are killed by contact, which promotes further adhesion of bacteria and biofilm formation. Therefore, we constructed a novel multifunctional bactericidal and fouling release antibacterial surface through the combination of temperature-responsive N-vinylcaprolactam (VCL), hydrophilic 2-methacryloyloxyethyl phosphorylcholine (MPC) and a bactericidal quaternary ammonium salt (2-(dimethylamino)-ethyl methacrylate (DMAEMA+)). The terpolymer coating was prepared through surface-initiated reversible addition-fragmentation chain-transfer (RAFT) polymerization and characterized using water contact angle measurements, atomic force microscopy and spectroscopic ellipsometry. At a temperature above the lower critical solution temperature (LCST), the P(VCL-co-DMAEMA+-co-MPC) terpolymer coating was in a compressed and hydrophobic state with low moisture content, which displayed bactericidal efficiency against Gram-positive Staphylococcus aureus. The coating could be switched into a relatively hydrophilic surface at a temperature below the LCST, which showed self-cleaning properties against both bacteria and bovine serum albumin. The functionalized surface showed good biocompatibility against human lens epithelial cells as evaluated by morphology studies and activity measurements.

Copolymer Brushes with Temperature-Triggered, Reversibly Switchable Bactericidal and Antifouling Properties for Biomaterial Surfaces

The adherence of bacteria and the formation of biofilm on implants is a serious problem that often leads to implant failure. A series of antimicrobial coatings have been constructed to resist bacterial adherence or to kill bacteria through contact with or release of antibacterial agents. The accumulation of dead bacteria facilitates further bacterial contamination and biofilm development. Herein, we have designed and constructed a novel, reversibly switchable bactericidal and antifouling surface through surface-initiated reversible addition-fragmentation chain transfer (RAFT) polymerization to combine thermally responsive N-isopropylacrylamide (NIPAAm) and bactericidal quaternary ammonium salts (2-(dimethylamino)-ethyl methacrylate (DMAEMA⁺)). Measurements of spectroscopic ellipsometry and water contact angle and X-ray photoelectron spectroscopy were used to examine the process of the surface functionalization. The temperature-responsive P(DMAEMA⁺-co-NIPAAm) copolymer coating can switch by phase transition between a hydrophobic capturing surface at high temperatures and a relatively hydrophilic antifouling surface at lower temperatures. The quaternary ammonium salts of PDMAEMA⁺ displayed bactericidal efficiency against both Escherichia coli and Staphylococcus aureus. The functionalized surface could efficiently prevent bovine serum albumin adsorption and had good biocompatibility against human lens epithelial cells.