Chitin-Based Double-Network Hydrogel as Potential Superficial Soft-Tissue-Repairing Materials

Advances in enhancing the mechanical properties of biopolymer hydrogels via multi-strategic approaches

The limited mechanical properties of biopolymer-based hydrogels have hindered their widespread applications in biomedicine and tissue engineering. In recent years, researchers have shown significant interest in developing novel approaches to enhance the mechanical performance of hydrogels. This review focuses on key strategies for enhancing mechanical properties of hydrogels, including dual-crosslinking, double networks, and nanocomposite hydrogels, with a comprehensive analysis of their underlying mechanisms, benefits, and limitations. It also introduces the classic application scenarios of biopolymer-based hydrogels and the direction of future research efforts, including wound dressings and tissue engineering based on 3D bioprinting. This review is expected to deepen the understanding of the structure-mechanical performance-function relationship of hydrogels and guide the further study of their biomedical applications.

Graphene Hybrid Tough Hydrogels with Nanostructures for Tissue Regeneration

Over the past few decades, hydrogels have attracted considerable attention as promising biomedical materials. However, conventional hydrogels require improved mechanical properties, such as brittleness, which significantly limits their widespread use. Recently, hydrogels with remarkably improved toughness have been developed; however, their low biocompatibility must be addressed. In this study, we developed a tough graphene hybrid hydrogel with nanostructures. The resultant hydrogel exhibited remarkable mechanical properties while representing an aligned nanostructure that resembled the extracellular matrix of soft tissue. Owing to the synergistic effect of the topographical properties, and the enhanced biochemical properties, the graphene hybrid hydrogel had excellent stretchability, resilience, toughness, and biocompatibility. Furthermore, the hydrogel displayed outstanding tissue regeneration capabilities (e.g., skin and tendons). Overall, the proposed graphene hybrid tough hydrogel may provide significant insights into the application of tough hydrogels in tissue regeneration.

Hydrogels based on seafood chitin: From extraction to the development

Chitin is extensively applied in vast applications due to its excellent biological properties, such as biodegradable and non-toxic. About 50 % of waste generated during seafood processing is chitin. Conventionally, chitin is extracted via chemical method. However, it has many shortcomings. Many novel extraction methods have emerged, including enzymatic hydrolysis, microbial fermentation, ultrasonic or microwave-assisted, ionic liquids, and deep eutectic solvents. Chitin and its derivatives-based hydrogels have attracted much attention due to their excellent properties. Nevertheless, they all have many limitations. Therefore, the preparation and application of chitin and its derivatives-based hydrogels are still facing great challenges. This review focuses on the challenges and prospects for sustainable chitin extraction from seafood waste and the preparation and application of chitin and its derivatives-based hydrogels. First section summarizes the mechanism and application of several methods of extracting chitin. The different extraction methods were evaluated from the aspects of yield, degree of acetylation, and protein and mineral residuals. The shortcomings of the extraction methods are also discussed. Next section summarizes the preparation and application of chitin and its derivatives-based hydrogels. Overall, we hope this mini-review can provide a practical reference for selecting chitin extraction methods from seafood and applying chitin and its derivatives-based hydrogels.

Polysaccharide-Based Double-Network Hydrogels: Polysaccharide Effect, Strengthening Mechanisms, and Applications

Polysaccharides are carbohydrate polymers that are major components of plants, animals, and microorganisms, with unique properties. Biological hydrogels are polymeric networks that imbibe and retain large amounts of water and are the major components of living organisms. The mechanical properties of hydrogels are critical for their functionality and applications. Since synthetic polymeric double-network (DN) hydrogels possess unique network structures with high and tunable mechanical properties, many natural functional polysaccharides have attracted increased attention due to their rich and convenient sources, unique chemical structure and chain conformation, inherently desirable cytocompatibility, biodegradability and environmental friendliness, diverse bioactivities, and rheological properties, which rationally make them prominent constituents in designing various strong and tough polysaccharide-based DN hydrogels over the past ten years. This review focuses on the latest developments of polysaccharide-based DN hydrogels to comprehend the relationship among the polysaccharide properties, inner strengthening mechanisms, and applications. The aim of this review is to provide an insightful mechanical interpretation of the design strategy of novel polysaccharide-based DN hydrogels and their applications by introducing the correlation between performance and composition. The mechanical behavior of DN hydrogels and the roles of varieties of marine, microbial, plant, and animal polysaccharides are emphatically explained.

An Overview of Recent Developments in the Management of Burn Injuries

According to the World Health Organization (WHO), around 11 million people suffer from burns every year, and 180,000 die from them. A burn is a condition in which heat, chemical substances, an electrical current or other factors cause tissue damage. Burns mainly affect the skin, but can also affect deeper tissues such as bones or muscles. When burned, the skin loses its main functions, such as protection from the external environment, pathogens, evaporation and heat loss. Depending on the stage of the burn, the patient's condition and the cause of the burn, we need to choose the most appropriate treatment. Personalization and multidisciplinary collaboration are key to the successful management of burn patients. In this comprehensive review, we have collected and discussed the available treatment options, focusing on recent advances in topical treatments, wound cleansing, dressings, skin grafting, nutrition, pain and scar tissue management.

Stretchable, Adhesive, and Biocompatible Hydrogel Based on Iron-Dopamine Complexes

Hydrogels' exceptional mechanical strength and skin-adhesion characteristics offer significant advantages for various applications, particularly in the fields of tissue adhesion and wearable sensors. Herein, we incorporated a combination of metal-coordination and hydrogen-bonding forces in the design of stretchable and adhesive hydrogels. We synthesized four hydrogels, namely PAID-0, PAID-1, PAID-2, and PAID-3, consisting of acrylamide (AAM), N,N'-methylene-bis-acrylamide (MBA), and methacrylic-modified dopamine (DA). The impact of different ratios of iron (III) ions to DA on each hydrogel's performance was investigated. Our results demonstrate that the incorporation of iron-dopamine complexes significantly enhances the mechanical strength of the hydrogel. Interestingly, as the DA content increased, we observed a continuous and substantial improvement in both the stretchability and skin adhesiveness of the hydrogel. Among the hydrogels tested, PAID-3, which exhibited optimal mechanical properties, was selected for adhesion testing on various materials. Impressively, PAID-3 demonstrated excellent adhesion to diverse materials and, combined with the low cytotoxicity of PAID hydrogel, holds great promise as an innovative option for biomedical engineering applications.

Chitin Nanofibrils Enabled Core-Shell Microcapsules of Alginate Hydrogel

An engineered 3D architectural network of the biopolymeric hydrogel can mimic the native cell environment that promotes cell infiltration and growth. Among several bio-fabricated hydrogel structures, core-shell microcapsules inherit the potential of cell encapsulation to ensure the growth and transport of cells and cell metabolites. Herein, a co-axial electrostatic encapsulation strategy is used to create and encapsulate the cells into chitin nanofibrils integrated alginate hydrogel microcapsules. Three parameters that are critical in the electrostatic encapsulation process, hydrogel composition, flow rate, and voltage were optimized. The physicochemical characterization including structure, size, and stability of the core-shell microcapsules was analyzed by scanning electron microscope (SEM), FTIR, and mechanical tests. The cellular responses of the core-shell microcapsules were evaluated through in vitro cell studies by encapsulating NIH/3T3 fibroblast cells. Notably, the bioactive microcapsule showed that the cell viability was found excellent for more than 2 weeks. Thus, the results of this core-shell microcapsule showed a promising approach to creating 3D hydrogel networks suitable for different biomedical applications such as in vitro tissue models for toxicity studies, wound healing, and tissue repair.

High-strength, antibacterial, antioxidant, hemostatic, and biocompatible chitin/PEGDE-tannic acid hydrogels for wound healing

Natural polymer hydrogels are widely used in various aspects of biomedical engineering, such as wound repair, owing to their abundance and biosafety. However, the low strength and the lack of function restricted their development and application scope. Herein, we fabricated novel multifunctional chitin/PEGDE-tannic acid (CPT) hydrogels through chemical- and physical-crosslinking strategies, using chitin as the base material, polyethylene glycol diglycidyl ether (PEGDE) and tannic acid (TA) as crosslinking agents, and 90 % ethanol as the regenerative bath. CPT hydrogels maintained a stable three-dimensional porous structure with suitable water contents and excellent biocompatibility. The mechanical properties of hydrogels were greatly improved (tensile stress up to 5.43 ± 1.14 MPa). Moreover, CPT hydrogels had good antibacterial, antioxidant, and hemostatic activities and could substantially promote wound healing in a rat model of full-thickness skin defect by regulating inflammatory responses and promoting collagen deposition and blood vessel formation. Therefore, this work provides a useful strategy to fabricate novel multifunctional CPT hydrogels with excellent mechanical, antibacterial, antioxidant, hemostatic, and biocompatible properties. CPT hydrogels could be promising candidates for wound healing.

Interfacial assembly of chitin/Mn3O4 composite hydrogels as photothermal antibacterial platform for infected wound healing

To combat bacteria and even biofilm infections, developing alternative antibacterial wound dressings independent of antibiotics is imperative. Herein, this study developed a series of bioactive chitin/Mn₃O₄ composite hydrogels under mild conditions for infected wound healing application. The in situ synthesized Mn₃O₄ NPs homogeneously distribute throughout chitin networks and strongly interact with chitin matrix, and as well as endow the chitin/Mn₃O₄ hydrogels with NIR-assisted outstanding photothermal antibacterial and antibiofilm activities. Meantime, the chitin/Mn₃O₄ hydrogels exhibit favorable biocompatibility and antioxidant property. Furthermore, the chitin/Mn₃O₄ hydrogels with the assist of NIR show an excellent skin wound healing performance in a mouse full-thickness S. aureus biofilms-infected wound model, by accelerating the phase transition from inflammation to remodeling. This study broadens the scope for the fabrication of chitin hydrogels with antibacterial property, and offers an excellent alternative for the bacterial-associated wound infection therapy.

Nanosheet-hydrogel composites: from preparation and fundamental properties to their promising applications

Hydrogels are an important class of soft materials with elastic and intelligent properties. Nevertheless, these traditional hydrogels usually possess poor mechanical properties and limited functions, which greatly restrict their further applications. With the rapid development of nanotechnology, there have been significant advances in the design and fabrication of functional nanocomposite hydrogels with unique properties and functions. Among various materials, nanosheets with planar topography, large specific surface areas, and versatile physicochemical properties have attracted intense research interest. Herein, this review summarises the synthesis mechanisms, fundamental properties, and promising applications of nanosheet-incorporated hydrogels. In particular, how the nanosheet structure is applied to improve the overall performance of the hydrogel in each application is emphasized. Additionally, the current challenges and prospects are briefly discussed in this area. We expect that the combination of nanosheets and hydrogels can attract more researchers' interest and bring new opportunities in the future.

Preparation and properties of nano silica-based bioactive glass/apatite/sodium alginate composite hydrogel

In this paper, given the lack of osteogenic activity of sodium alginate (SA) hydrogel and to simulate the composition of natural bone, ionic-crosslinking NBG/n-HA/SA hydrogel scaffolds were prepared by using nano bioactive glass (NBG) and nano hydroxyapatite (n-HA) with high bioactivity as composite calcium sources and reinforcement phases, and D-gluconic acid δ-lactone (GDL) as the coagulant. The results showed that the mixture of the precursor forming the network had good injectability and plasticity. When the dosage of GDL was 0.75 g, the gelling time of the composite hydrogel could be regulated within 4-8 min, and the hydrogel had high compressive strength (170-220 kPa), as well. When the mass ratio of calcium source to SA was 1:1, the crosslinking network was relatively uniform with a considerable number of large pores around 40 μm in the structure. In the immersion experiment in vitro, it was found that the composite hydrogel could promote the deposition of bone-like apatite on the material's surface. Meanwhile, the cell experiments in vitro verified that the NBG/n-HA/SA composite hydrogel had good cytocompatibility without cytotoxicity. Moreover, the composite hydrogel could enhance the activity of ALP of mouse bone marrow mesenchymal stem cells, and thus, it had good osteogenic activity.

Hydrogel and Effects of Crosslinking Agent on Cellulose-Based Hydrogels: A Review

Hydrogels are hydrophilic polymer materials that can swell but are insoluble in water. Hydrogels can be synthesized with synthetic or natural polymers, but natural polymers are preferred because they are similar to natural tissues, which can absorb a high water content, are biocompatible, and are biodegradable. The three-dimensional structure of the hydrogel affects its water insolubility and ability to maintain its shape. Cellulose hydrogels are preferred over other polymers because they are highly biocompatible, easily accessible, and affordable. Carboxymethyl cellulose sodium (CMCNa) is an example of a water-soluble cellulose derivative that can be synthesized using natural materials. A crosslinking agent is used to strengthen the properties of the hydrogel. Chemical crosslinking agent is used more often than physical crosslinking agent. In this review, article, different types of crosslinking agents are discussed based on synthetic and natural crosslinking agents. Hydrogels that utilize synthetic crosslinking agent have advantages, such as adjustable mechanical properties and easy control of the chemical composition. However, hydrogels that use natural crosslinking agent have better biocompatibility and less latent toxic effect.

Polysaccharide-based nanosystems: a review

Polysaccharide-based nanosystem is an umbrella term for many areas within research and technology dealing with polysaccharides that have at least one of their dimensions in the realm of a few hundreds of nanometers. Nanoparticles, nanocrystals, nanofibers, nanofilms, and nanonetworks can be fabricated from many different polysaccharide resources. Abundance in nature, cellulose, starch, chitosan, and pectin of different molecular structures are widely used to fabricate nanosystems for versatile industrial applications. This review presents the dissolution and modification of polysaccharides, which are influenced by their different molecular structures and applications. The dissolution ways include conventional organic solvents, ionic liquids, inorganic strong alkali and acids, enzymes, and hydrothermal treatment. Rheological properties of polysaccharide-based nano slurries are tailored for the purpose functions of the final products, e.g., imparting electrostatic functions of nanofibers to reduce viscosity by using lithium chloride and octenyl succinic acid to increase the hydrophobicity. Nowadays, synergistic effects of polysaccharide blends are increasingly highlighted. In particular, the reinforcing effect of nanoparticles, nanocrystals, nanowhiskers, and nanofibers to hydrogels, aerogels, and scaffolds, and the double network hydrogels of a rigid skeleton and a ductile substance have been developed for many emerging issues.

Photo-crosslinked hydrogels for tissue engineering of corneal epithelium

The vast majority of patients with corneal blindness cannot recover their vision due to the serious shortage of donor cornea. However, the technology to construct a feasible corneal substitute is a promising treatment method for corneal blindness. In this paper, methacrylated gelatin (GelMA)-methacrylated hyaluronic acid (HAMA) double network (GHDN) hydrogels were prepared by modifying gelatin and hyaluronic acid with methacrylate anhydride (MA). GHDN hydrogel was compared with GelMA single network and HAMA single network hydrogels through characterization experiments of mechanical properties, optical properties, hydrophilicity and in-situ degradation in vitro. At the same time, the biocompatibility of hydrogel was tested by inoculating rabbit corneal epithelial cells (CEpCs) epidermal cells on hydrogels using CCK-8 test, live/dead staining, immunofluorescence staining and qRT-PCR. It was found that the GHDN hydrogel has optical transparency in the visible region, and its mechanical properties are better than those of GelMA and HAMA hydrogels, and its hydrophilicity is similar to that of normal human corneas. The results of in vitro hydrogel culture of CEpCs showed that the proliferation of CEpCs on GHDN hydrogel was two times higher than that of HAMA hydrogel, and the expression of specific marker Cytokeratin 3 (CK3) and Cytokeratin 12 (CK12) could be better maintained on GHDN hydrogel. All the experimental results proved that GHDN hydrogel has good physical properties and biocompatibility and is a potential candidate for corneal tissue engineering scaffolds.

Burn Wound Healing: Clinical Complications, Medical Care, Treatment, and Dressing Types: The Current State of Knowledge for Clinical Practice

According to the World Health Organization (WHO), it is estimated that each year approximately 11 million people suffer from burn wounds, 180,000 of whom die because of such injuries. Regardless of the factors causing burns, these are complicated wounds that are difficult to heal and are associated with high mortality rates. Medical care of a burn patient requires a lot of commitment, experience, and multidirectional management, including surgical activities and widely understood pharmacological approaches. This paper aims to comprehensively review the current literature concerning burn wounds, including classification of burns, complications, medical care, and pharmacological treatment. We also overviewed the dressings (with an emphasis on the newest innovations in this field) that are currently used in medical practice to heal wounds.

Toward Strong and Tough Wood-Based Hydrogels for Sensors

The purpose of this research is to develop strong and tough wood-based hydrogels, which are reinforced by an aligned cellulosic wood skeleton. The hypothesis is that improved interfacial interaction between the wood cell wall and a polymer is of great importance for improving the mechanical performance. To this end, a facile and green approach, called ultraviolet (UV) grafting, was performed on the polyacrylamide (PAM)-infiltrated wood skeleton without using initiators. An important finding was that PAM-grafted cellulose nanofiber (CNF) architectures formed in the obtained hydrogels under UV irradiation, where CNFs themselves serve as both initiators and cross-linkers. Moreover, an alkali swelling treatment was utilized to improve the accessibility of the wood cell wall before UV irradiation and thus facilitate grafting efficiency. The resulting alkali-treated Wood-g-PAM hydrogels exhibited significantly higher tensile properties than those of the Wood/PAM hydrogel and were further assembled into conductive devices for sensor applications. We believe that this UV grafting strategy may facilitate the development of strong wood-based composites with interesting features.

Dynamic bonds enable high toughness and multifunctionality in gelatin/tannic acid-based hydrogels with tunable mechanical properties

Biopolymer-based functional hydrogels with excellent mechanical properties are desired, but their fabrication remains a challenge. Learning from the tofu-making process, we developed a freely formable hydrogel with high toughness and stiffness from the hydrogen bond-rich coacervation of tannic acid and gelatin through a simple hot-pressing process that transforms the coacervate particles into a bulk hydrogel. The mechanical properties of the obtained gelatin/tannic acid hydrogel (G/T gel) can be controlled by tuning the weight ratio of tannic acid to gelatin in the gel. The G/T gel with optimum mechanical properties possesses high Young's modulus, fracture strain, and fracture energy of ∼60 MPa, ∼10, and ∼24 kJ m^-2, respectively. These properties arise from the phase-separated structure and high concentration of dynamic hydrogen bonds with widely distributed bond strengths. These dynamic hydrogen bonds also enable multifunctional properties of the gel, such as self-recovery, self-healing, rebuildability and shape memory. The combination of excellent mechanical properties, good biocompatibility, and useful functionalities into one hydrogel that comes from renewable sources demonstrates the great potential of G/T gels.

Preparation and characterization of a dual cross-linking injectable hydrogel based on sodium alginate and chitosan quaternary ammonium salt

The development of cheap and easily available injectable hydrogel is an urgent problem in the field of biomedical engineering. Herein, we used chitosan quaternary ammonium salt and sodium alginate to prepare a dual crosslinking hydrogel. The hydrogel formed in-situ crosslinking and can be injected continuously. Interestingly, the formed hydrogel possessed a homogeneous 3D network structure and exhibited reasonable mechanical properties. Moreover, the hydrogels had excellent injectability, and the compression strength of the hydrogel (Gel-0.5) was up to 27.65 kPa. Additionally, the hydrogel showed good biocompatibility that evaluated by cytotoxicity. Notably, the hydrogel was nontoxic toward NIH-3T3 cells. In summary, the hydrogel we produced can be used as an ideal biomaterial for further applications in the field of biomedical engineering.

Exploration of Bioengineered Scaffolds Composed of Thermo-Responsive Polymers for Drug Delivery in Wound Healing

Innate and adaptive immune responses lead to wound healing by regulating a complex series of events promoting cellular cross-talk. An inflammatory response is presented with its characteristic clinical symptoms: heat, pain, redness, and swelling. Some smart thermo-responsive polymers like chitosan, polyvinylpyrrolidone, alginate, and poly(ε-caprolactone) can be used to create biocompatible and biodegradable scaffolds. These processed thermo-responsive biomaterials possess 3D architectures similar to human structures, providing physical support for cell growth and tissue regeneration. Furthermore, these structures are used as novel drug delivery systems. Locally heated tumors above the polymer lower the critical solution temperature and can induce its conversion into a hydrophobic form by an entropy-driven process, enhancing drug release. When the thermal stimulus is gone, drug release is reduced due to the swelling of the material. As a result, these systems can contribute to the wound healing process in accelerating tissue healing, avoiding large scar tissue, regulating the inflammatory response, and protecting from bacterial infections. This paper integrates the relevant reported contributions of bioengineered scaffolds composed of smart thermo-responsive polymers for drug delivery applications in wound healing. Therefore, we present a comprehensive review that aims to demonstrate these systems' capacity to provide spatially and temporally controlled release strategies for one or more drugs used in wound healing. In this sense, the novel manufacturing techniques of 3D printing and electrospinning are explored for the tuning of their physicochemical properties to adjust therapies according to patient convenience and reduce drug toxicity and side effects.