Polymeric Materials for Eye Surface and Intraocular Applications

Zwitterionic modified and freeze-thaw reinforced foldable hydrogel as intraocular lens for posterior capsule opacification prevention

Posterior capsule opacification (PCO) is a predominant postoperative complication, often leading to visual impairment due to the aberrant proliferation and adhesion of lens epithelial cells (LECs) and protein precipitates subsequent to intraocular lens (IOL) implantation. To address this clinical issue, a foldable and antifouling sharp-edged IOL implant based on naturally-derived cellulose hydrogel is synthesized. The mechanical strength and transparency of the hydrogel is enhanced via repeated freeze-thaw (FT) cycles. The incorporated zwitterionic modifications can remarkably prevent the incidence of PCO by exhibiting proteins repulsion and cell anti-adhesion properties. The graft of dopamine onto both the haptic and the periphery of the posterior surface ensures the adhesion of the hydrogel to the posterior capsule and impedes the migration of LECs without compromising transparency. In in vivo study, the zwitterionic modified foldable hydrogel exhibits uveal and capsular biocompatibility synchronously with no signs of inflammatory response and prevent PCO formation, better than that of commercialized and PEG-modified IOL. With foldability, endurability, antifouling effect, and adhesive to posterior capsule, the reported hydrogel featuring heterogeneous surface design displays great potential to eradicate PCO and attain post-operative efficacy after cataract surgery.

Current trend on preparation, characterization and biomedical applications of natural polysaccharide-based nanomaterial reinforcement hydrogels: A review

The tunable properties of hydrogels have led to their widespread use in various biomedical applications such as wound treatment, drug delivery, contact lenses, tissue engineering and 3D bioprinting. Among these applications, natural polysaccharide-based hydrogels, which are fabricated from materials like agarose, alginate, chitosan, hyaluronic acid, cellulose, pectin and chondroitin sulfate, stand out as preferred choices due to their biocompatibility and advantageous fabrication characteristics. Despite the inherent biocompatibility, polysaccharide-based hydrogels on their own tend to be weak in physiochemical and mechanical properties. Therefore, further reinforcement in the hydrogel is necessary to enhance its suitability for specific applications, ensuring optimal performance in diverse settings. Integrating nanomaterials into hydrogels has proven effective in improving the overall network and performance of the hydrogel. This approach also addresses the limitations associated with pure hydrogels. Next, an overview of recent trends in the fabrication and applications of hydrogels was presented. The characterization of hydrogels was further discussed, focusing specifically on the reinforcement achieved with various hydrogel materials used so far. Finally, a few challenges associated with hydrogels by using polysaccharide-based nanomaterial were also presented.

Current Innovations in Intraocular Pressure Monitoring Biosensors for Diagnosis and Treatment of Glaucoma-Novel Strategies and Future Perspectives

Biosensors are devices that quantify biologically significant information required for diverse applications, such as disease diagnosis, food safety, drug discovery and detection of environmental pollutants. Recent advancements in microfluidics, nanotechnology and electronics have led to the development of novel implantable and wearable biosensors for the expedient monitoring of diseases such as diabetes, glaucoma and cancer. Glaucoma is an ocular disease which ranks as the second leading cause for loss of vision. It is characterized by the increase in intraocular pressure (IOP) in human eyes, which results in irreversible blindness. Currently, the reduction of IOP is the only treatment used to manage glaucoma. However, the success rate of medicines used to treat glaucoma is quite minimal due to their curbed bioavailability and reduced therapeutic efficacy. The drugs must pass through various barriers to reach the intraocular space, which in turn serves as a major challenge in glaucoma treatment. Rapid progress has been observed in nano-drug delivery systems for the early diagnosis and prompt therapy of ocular diseases. This review gives a deep insight into the current advancements in the field of nanotechnology for detecting and treating glaucoma, as well as for the continuous monitoring of IOP. Various nanotechnology-based achievements, such as nanoparticle/nanofiber-based contact lenses and biosensors that can efficiently monitor IOP for the efficient detection of glaucoma, are also discussed.

Arrested Phase Separation Enables High-Performance Keratoprostheses

Corneal transplantation is impeded by donor shortages, immune rejection, and ethical reservations. Pre-made cornea prostheses (keratoprostheses) offer a proven option to alleviate these issues. Ideal keratoprostheses must possess optical clarity and mechanical robustness, but also high permeability, processability, and recyclability. Here, it is shown that rationally controlling the extent of arrested phase separation can lead to optimized multiscale structure that reconciles permeability and transparency, a previously conflicting goal by common pore-forming strategies. The process is simply accomplished by hydrothermally treating a dense and transparent hydrophobic association hydrogel. The examination of multiscale structure evolution during hydrothermal treatment reveals that the phase separation with upper miscibility gap evolves to confer time-dependent pore growth due to slow dynamics of polymer-rich phase which is close to vitrification. Such a process can render a combination of multiple desired properties that equal or surpass those of the state-of-the-art keratoprostheses. In vivo tests confirm that the keratoprosthesis can effectively repair corneal perforation and restore a transparent cornea with treatment outcomes akin to that of allo-keratoplasty. The keratoprosthesis is easy to access and convenient to carry, and thus would be an effective temporary substitute for a corneal allograft in emergency conditions.

Preparation and Evaluation of Bacterial Nanocellulose/Hyaluronic Acid Composite Artificial Cornea for Application of Corneal Transplantation

The treatment for corneal damage requires donor corneal transplantation, but there is a serious scarcity of donor corneas worldwide. In this study, we aimed to design a new artificial cornea with good cytocompatibility, excellent optical properties and suture resistance, and great moisturizing properties. A new bacterial nanocellulose (BNC) membrane with anisotropic mechanical properties and high light transmission was produced in a horizontal rotary drum reactor. However, as a potential material for artificial keratoplasty, the transparency and mechanical properties of the new BNC membrane were not satisfactory. Thus, hyaluronic acid (HA) was introduced in the BNC to synthesize the BNC/HA composite membrane by using 1,4-butanediol diglycidyl ether (BDDE) as the chemical cross-linking agent. The micro-morphology, light transmittance, mechanical properties, water content, moisture retention ability, and cytocompatibility of the composite membranes were further evaluated. HA was fixed in the BNC network by the ether bond, and the composite membrane was found to have excellent light transmittance (up to 95.96%). The composite membrane showed excellent mechanical properties, for instance, its tensile strength exceeded the human normal intraocular pressure (IOP) (1.33-2.80 kPa), the maximum burst pressure was about 130 kPa, 46-97 times that of the normal IOP, and its suture force was close to that of the human amniotic membrane (0.1 N). Based on the three-dimensional network scaffold of BNC and the high water absorption characteristics of HA, the artificial cornea had high water content and high moisture retention ability. The rabbit corneal stromal cells cultured in vitro showed that the artificial cornea substitute had excellent cytocompatibility. BDDE is the most frequently used cross-linker in most HA products in the current cosmetic medicine industry owing to its long-term safety records for over 15 years. Therefore, the BNC/HA composite hydrogel cross-linked with BDDE has great potential in artificial keratoplasty or ocular surface repair.

Advanced Optical Wavefront Technologies to Improve Patient Quality of Vision and Meet Clinical Requests

Adaptive optics (AO) is employed for the continuous measurement and correction of ocular aberrations. Human eye refractive errors (lower-order aberrations such as myopia and astigmatism) are corrected with contact lenses and excimer laser surgery. Under twilight vision conditions, when the pupil of the human eye dilates to 5-7 mm in diameter, higher-order aberrations affect the visual acuity. The combined use of wavefront (WF) technology and AO systems allows the pre-operative evaluation of refractive surgical procedures to compensate for the higher-order optical aberrations of the human eye, guiding the surgeon in choosing the procedure parameters. Here, we report a brief history of AO, starting from the description of the Shack-Hartmann method, which allowed the first in vivo measurement of the eye's wave aberration, the wavefront sensing technologies (WSTs), and their principles. Then, the limitations of the ocular wavefront ascribed to the IOL polymeric materials and design, as well as future perspectives on improving patient vision quality and meeting clinical requests, are described.

Significantly improved cell affinity of polydimethylsiloxane enabled by a surface-modified strategy with chemical coupling

Polydimethylsiloxane (PDMS) is a commonly used insulation/packaging material for implantable neural electrodes. Nevertheless, the PDMS-initiated tissue response would lead to the deterioration of the electrode performances post-implantation, owing to its intrinsic hydrophobic and cell-repellent surface. The conventional physical coatings by hydrophilic hydrogels or bioactive molecules are unable to maintain during the long-term implantation due to their low stability by physical adhesion. In this work, we first anchor both hydrophilic polyethylene glycol (PEG) and bioactive molecule poly-L-lysine (PLL) on the PDMS surface by chemical coupling to change the PDMS surface from hydrophobic and cell-repellent to hydrophilic and cell-adhesive. XPS tests indicate the chemically coupled modification layers are stable on the PDMS surface after experiencing a harsh rinse process. Contact angle measurements show that the use of PEG 600 with the moderate molecular weight results in the highest hydrophilicity for the resulting PDMS-PEG-PLL. PC12 cell evaluation results exhibit that the PDMS-PEG-PLL with PEG 600 leads to significantly larger cell adhesion area, more neurite number, and longer neurite length than the PDMS. The PDMS-PEG-PLL with PEG 600 featuring stable modification layers, high hydrophilicity, and superior cell affinity has great potential in stabilizing the neural electrode-tissue interface for the long-term implantation. Graphical abstract.

Polymeric biomaterials in the treatment of posterior segment diseases

Polymeric biomaterials are biological or synthetic substances which can be engineered to interact with biological systems for the diagnosis or treatment of diseases. These biomaterials have immense potential for treating eyes diseases, particularly the retina—a site of many inherited and acquired diseases. Polymeric biomaterials can be engineered to function both as an endotamponade agent and to prevent intraocular scarring in retinal detachment repair surgeries. They can also be designed as a drug delivery platform for treatment of retinal diseases. Finally, they can be used as scaffolds for cellular products and provide non-viral gene delivery solutions to the retina. This perspective article explains the role of polymeric biomaterials in the treatment of retinal conditions by highlighting recent advances being translated to clinical practice. The article will also identify potential hurdles to clinical translation as future research directions in the field.

Recent Advances of Intraocular Lens Materials and Surface Modification in Cataract Surgery

Advances in cataract surgery have increased the demand for intraocular lens (IOL) materials. At present, the progress of IOL materials mainly contains further improving biocompatibility, providing better visual quality and adjustable ability, reducing surgical incision, as well as dealing with complications such as posterior capsular opacification (PCO) and ophthalmitis. The purpose of this review is to describe the research progress of relevant IOL materials classified according to different clinical purposes. The innovation of IOL materials is often based on the common IOL materials on the market, such as silicon and acrylate. Special properties and functions are obtained by adding extra polymers or surface modification. Most of these studies have not yet been commercialized, which requires a large number of clinical trials. But they provide valuable thoughts for the optimization of the IOL function.

Foldable Bulk Anti-adhesive Polyacrylic Intraocular Lens Material Design and Fabrication for Posterior Capsule Opacification Prevention

Posterior capsular opacification (PCO) is a primary complication after phacoemulsification combined with intraocular lens (IOL) implantation, which is attributed to adhesion, proliferation, and migration of residual lens epithelial cells on IOL. Although surface hydrophilic coating is considered to be a powerful way to inhibit PCO incidence after surgery, it requires complex post-production processes, thus limiting their applicability. In comparison, bulk modification is a stable, effective, and facile IOL synthesis method for PCO prevention. Herein, a new anti-adhesive IOL material was designed and successfully synthesized by radical copolymerization of ethylene glycol phenyl ether methacrylate (EGPEMA) and 2-(2-ethoxyethoxy) ethyl acrylate (EA). The physicochemical properties of P(EGPEMA-co-EA) copolymer materials, including chemical structure, mechanical, thermal, surface, and optical properties, were analyzed by using ¹H NMR spectroscopy, FT-IR spectroscopy, tensile test, thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), water contact angle measurement, and UV-vis spectroscopy. The elongation at break and the modulus of elasticity of the copolymer were tunable through the change of the composition of monomers. Compared to other components, the tensile results showed that P(EGPEMA-co-EA) materials (70% EGPEMA in mass ratio, F7) are suitable for the preparation of foldable intraocular lens with lower elastic modulus and higher elongation at break. TGA and DSC showed that the material has high thermal stability, and the glass transition temperature of F7 material is 16.1 °C. The water contact angle measurement results showed that the introduction of EA improved the hydrophilicity of the material. The percentage of transmittance of all copolymers at 400-800 nm is above 85%. Then, the biocompatibility of the materials was evaluated by in vitro assay and subcutaneous implantation. Both in vitro results and subcutaneous implantation experiments showed that the designed IOL materials exhibited a good anti-adhesion effect and no cytotoxicity. Finally, phacoemulsification and IOL intraocular implantation were performed, and the in vivo results confirmed the good PCO prevention ability as well as the biocompatibility of the new IOL materials.

Foldable Glistening-Free Acrylic Intraocular Lens Biomaterials with Dual-Side Heterogeneous Surface Modification for Postoperative Endophthalmitis and Posterior Capsule Opacification Prophylaxis

Hydrophobic acrylic intraocular lenses (IOLs) are widely used in cataract treatment for posterior capsule opacification (PCO) prophylaxis. However, undesired glistening and postoperative endophthalmitis are two major potential risks. Hence, a series of poly(2-phenoxyethyl methacrylate-co-2-phenoxyethyl acrylate-co-2-ethylhexyl methacrylate) (PPPE) acrylic IOL materials were synthesized for "glistening-free" optimization. The selected PPPE with 2% 2-ethylhexyl methacrylate showed excellent optical, foldable, and thermomechanical properties. The anterior surface of PPPE was coated with polydopamine followed by gentamycin conjugation (PDA/GS). It inhibited bacterial adhesion by 74% and decreased the biofilm thickness by 87%. In inflammatory mimicking conditions, bacterial proliferation was restrained, with acidic-dependent GS release behavior. The surface of PPPE toward the posterior capsule remained hydrophobic. It was conducive to human lens epithelial cell adhesion, collagen IV and fibronectin adsorption, and the following "sealed sandwich structure" formation. In summary, the PPPE with a dual-side heterogeneous surface displayed good application prospects in postoperative endophthalmitis and PCO prevention.