Cross-Linking Porcine Pericardium by 3,4-Dihydroxybenzaldehyde: A Novel Method to Improve the Biocompatibility of Bioprosthetic Valve

A Novel Polymer Film to Develop Heart Valve Prostheses

Polymer heart valves are a promising alternative to bioprostheses, the use of which is limited by the risks of calcific deterioration of devitalized preserved animal tissues. This is especially relevant in connection with the increasingly widespread use of transcatheter valves. Advances in modern organic chemistry provide a wide range of polymers that can replace biological material in the production of valve prostheses. In this work, the main properties of REPEREN® polymer film, synthesized from methacrylic oligomers reinforced with ultra-thin (50 µm) polyamide fibers, are studied. The film structure was studied using scanning electron microscopy (SEM) and atomic force microscopy (AFM). The hydrophilicity and cytocompatibility with EA.hy926 endothelial cells were assessed, and a hemocompatibility evaluation was carried out by studying the platelet aggregation and adhesion upon contact of the REPEREN® with blood. The mechanical behavior and biocompatibility (subcutaneous implantation in rats for up to 90 days, followed by a histological examination) were studied in comparison with a bovine pericardium (BP) cross-linked with an ethylene glycol diglycidyl ether (DE). The results showed that REPEREN® films have two surfaces with a different relief, smooth and rough. The rough surface is more hydrophilic, hemo- and cytocompatible. Compared with the DE-BP, REPEREN® has a higher ultimate tensile stress and better biocompatibility when implanted subcutaneously in rats. The key properties of REPEREN® showed its potential for the development of a polymeric heart valve. Further studies should be devoted to assessing the durability of REPEREN® valves and evaluating their function during orthotopic implantation in large animals.

"Synergistic anticoagulant and endothelial regeneration strategy" based on mussel-inspired phospholipid copolymer coating and bioactive zeolitic imidazolate frameworks-90 to maintain the patency of CoCr stent

Given the risks of poor patient compliance and bleeding associated with current dual antiplatelet therapies, it is urgent to develop the next generation of cardiovascular stents with anticoagulation and rapid endothelialization capabilities. Inspired by the prominent bioactivity and bioavailability of zeolitic imidazolate framework-90 (ZIF-90) in driving endothelial cell (EC) morphogenesis, this research proposes a "synergistic anticoagulant and endothelial regeneration strategy" depending on mussel-inspired phospholipid copolymer (MIPC) and ZIF-90. Depending on the copolymerization of the catechol with dopamine (Dopa) monomers, Dopa/MIPC coating was immobilized on the surface of CoCr via a one-pot process for resisting the initial thrombosis induced by platelets and fibrinogen. Meanwhile, ZIF-90 was loaded on the coating via coordination effect, aiming to accelerate the proliferation and migration of ECs. Compared with CoCr, the well-designed CoCr-Dopa/MIPC@ZIF-90 not only reduced fibrinogen adhesion by approximately 40 % and platelet adhesion by almost 55 %, but also promoted the proliferation and migration of ECs significantly in vitro. Furthermore, the blood flow velocity of CoCr-Dopa/MIPC@ZIF-90 stent was similar to natural aorta and ECs coverage on it was greatly strengthened after 30 days in a rat aorta vascular stent implantation model. Collectively, CoCr-Dopa/MIPC@ZIF-90 exhibited obvious superiority in reducing the formation of thrombus and promoting endothelial regeneration, which might meet the high requirement for the next generation of vascular stent.

Decellularized Amnion Membrane Triggers Macrophage Polarization for Desired Host Immune Response

Appropriate regulation of immunomodulatory responses, particularly acute inflammation involving macrophages, is crucial for the desired functionality of implants. Decellularized amnion membrane (DAM) is produced by removing cellular components and antigenicity, expected to reduce immunogenicity and the risk of inflammation. Despite the potential of DAM as biomaterial implants, few studies have investigated its specific effects on immunomodulation. Here, it is demonstrated that DAM can regulate macrophage-driven inflammatory response and potential mechanisms are investigated. In vitro results show that DAM significantly inhibits M1 polarization in LPS-induced macrophages by inhibiting Toll-like receptors (TLR) signaling pathway and TNF signaling pathway and promotes macrophage M2 polarization. Physical signals from the 3D micro-structure and the active protein, DCN, binding to key targets may play roles in the process. In the subcutaneous implant model in rats, DAM inhibits the persistence of inflammation and fibrous capsule formation, while promoting M2 macrophage polarization, thereby facilitating tissue regeneration. This study provides insights into DAM's effect and potential mechanisms on the balance of M1/M2 macrophage polarization in vitro and vivo, emphasizing the immunomodulation of ECM-based materials as promising implants.

Chondroitin Sulfate Derivative Cross-Linking of Decellularized Heart Valve for the Improvement of Mechanical Properties, Hemocompatibility, and Endothelialization

Tissue-engineered heart valve (TEHV) has emerged as a prospective alternative to conventional valve prostheses. The decellularized heart valve (DHV) represents a promising TEHV scaffold that preserves the natural three-dimensional structure and retains essential biological activity. However, the limited mechanical strength, fast degradation, poor hemocompatibility, and lack of endothelialization of DHV restrict its clinical use, which is necessary for ensuring its long-term durability. Herein, we used oxidized chondroitin sulfate (ChS), one of the main components of the extracellular matrix with various biological activities, to cross-link DHV to overcome the above problems. In addition, the ChS-adipic dihydrazide was used to react with residual aldehyde groups, thus preventing potential calcification. The results indicated notable enhancements in mechanical properties and resilience against elastase and collagenase degradation in vitro as well as the ability to withstand extended periods of storage without compromising the structural integrity of valve scaffolds. Additionally, the newly cross-linked valves exhibited favorable hemocompatibility in vitro and in vivo, thereby demonstrating exceptional biocompatibility. Furthermore, the scaffolds exhibited traits of gradual degradation and resistance to calcification through a rat subcutaneous implantation model. In the rat abdominal aorta implantation model, the scaffolds demonstrated favorable endothelialization, commendable patency, and a diminished pro-inflammatory response. As a result, the newly constructed DHV scaffold offers a compelling alternative to traditional valve prostheses, which potentially advances the field of TEHV.

Recent Advances in the Modification and Improvement of Bioprosthetic Heart Valves

Valvular heart disease (VHD) has become a burden and a growing public health problem in humans, causing significant morbidity and mortality worldwide. An increasing number of patients with severe VHD need to undergo heart valve replacement surgery, and artificial heart valves are in high demand. However, allogeneic valves from donors are lacking and cannot meet clinical practice needs. A mechanical heart valve can activate the coagulation pathway after contact with blood after implantation in the cardiovascular system, leading to thrombosis. Therefore, bioprosthetic heart valves (BHVs) are still a promising way to solve this problem. However, there are still challenges in the use of BHVs. For example, their longevity is still unsatisfactory due to the defects, such as thrombosis, structural valve degeneration, calcification, insufficient re-endothelialization, and the inflammatory response. Therefore, strategies and methods are needed to effectively improve the biocompatibility and longevity of BHVs. This review describes the recent research advances in BHVs and strategies to improve their biocompatibility and longevity.

A synergistic strategy based on active hydroxymethyl amine compounds and fucoidan for bioprosthetic heart valves with enhancing anti-coagulation and anti-calcification properties

With an aging population, the patients with valvular heart disease (VHD) are growing worldwide, and valve replacement is a primary choice for these patients with severe valvular disease. Among them, bioprosthetic heart valves (BHVs), especially BHVs trough transcatheter aortic valve replacement, are widely accepted by patients on account of their good hemodynamics and biocompatibility. Commercial BHVs in clinic are prepared by glutaraldehyde cross-linked pericardial tissue with the risk of calcification and thrombotic complications. In the present study, a strategy combines improved hemocompatibility and anti-calcification properties for BHVs has been developed based on a novel non-glutaraldehyde BHV crosslinker hexakis(hydroxymethyl)melamine (HMM) and the anticoagulant fucoidan. Besides the similar mechanical properties and enhanced component stability compared to glutaraldehyde crosslinked PP (G-PP), the fucoidan modified HMM-crosslinked PPs (HMM-Fu-PPs) also exhibit significantly enhanced anticoagulation performance with a 72 % decrease in thrombus weight compared with G-PP in ex-vivo shunt assay, along with the superior biocompatibility, satisfactory anti-calcification properties confirmed by subcutaneous implantation. Owing to good comprehensive performance of these HMM-Fu-PPs, this simple and feasible strategy may offer a great potential for BHV fabrication in the future, and open a new avenue to explore more N-hydroxymethyl compound based crosslinker with excellent performance in the field of biomaterials.

Evaluation of physicochemical properties of graphene oxide-decellularized pericardium biohybrid scaffold

The decellularized pericardium has been widely used in cardiac tissue engineering, whereas its clinical applications are limited due to weak mechanical performance, high collagen exposure, and being prone to microbial contamination. In this study, a biohybrid scaffold of the decellularized caprine pericardium (DCP) and graphene oxide (GO) was fabricated by an immersion coating technique. The antimicrobial activity of GO was evaluated against Escherichia coli and showed minimum inhibitory concentration at 125 μg/mL and minimum bactericidal concentration at 250 μg/mL. The presence of GO on the surface of the biohybrid GO-DCP was confirmed through SEM analysis. The existence of glycosaminoglycan, elastin, and collagen in the DCP and GO-DCP was inferred from the FTIR spectra. The biocompatibility of GO-DCP was studied by seeding valvular interstitial cells, and the results show GO coating supports cell adhesion on the serous and fibrous sides of the DCP. Further, the biomechanical response of DCP is unaltered by the presence of GO. In conclusion, GO enhances the biological performance of decellularized pericardium, which can be used in cardiac tissue engineering applications.

Recent progress in functional modification and crosslinking of bioprosthetic heart valves

Valvular heart disease (VHD), clinically manifested as stenosis and regurgitation of native heart valve, is one of the most prevalent cardiovascular diseases with high mortality. Heart valve replacement surgery has been recognized as golden standard for the treatment of VHD. Owing to the clinical application of transcatheter heart valve replacement technic and the excellent hemodynamic performance of bioprosthetic heart valves (BHVs), implantation of BHVs has been increasing over recent years and gradually became the preferred choice for the treatment of VHD. However, BHVs might fail within 10-15 years due to structural valvular degeneration (SVD), which was greatly associated with drawbacks of glutaraldehyde crosslinked BHVs, including cytotoxicity, calcification, component degradation, mechanical failure, thrombosis and immune response. To prolong the service life of BHVs, much effort has been devoted to overcoming the drawbacks of BHVs and reducing the risk of SVD. In this review, we summarized and analyzed the research and progress on: (i) modification strategies based on glutaraldehyde crosslinked BHVs and (ii) nonglutaraldehyde crosslinking strategies for BHVs.

A synergistic strategy of dual-crosslinking and loading intelligent nanogels for enhancing anti-coagulation, pro-endothelialization and anti-calcification properties in bioprosthetic heart valves

Currently, glutaraldehyde (GA)-crosslinked bioprosthetic heart valves (BHVs) still do not guarantee good biocompatibility and long-term effective durability for clinical application due to their subacute thrombus, inflammation, calcification, tearing and limited durability. In this study, double-modified xanthan gum (oxidized/vinylated xanthan gum (O2CXG)) was acquired from xanthan gum for subsequent double crosslinking and modification platform construction. Sulfonic acid groups with anticoagulant properties were also introduced through the free radical polymerization of vinyl sulfonate (VS) and vinyl on O2CXG. Taking advantage of the drug-loading function of xanthan gum, the treated pericardium was further loaded with inflammation-triggered dual drug-loaded nanogel (heparin (Hep) and atorvastatin (Ator)). Mechanical properties of O2CXG-crosslinked porcine pericardium (O2CXG-PP) were significantly improved via the first network formed by Schiff base bonds and the second C-C bonds network. Due to the presence of sulfonic acid groups as well as the dual drug release from nanogels under the stimulation of H2O2, the hemocompatibility, anti-inflammatory, pro-endothelialization and anti-calcification properties of the crosslinked pericardium modified with nanogels loaded with Hep and Ator (O2CXG+VS+(Hep+Ator) nanogel-PP) was significantly better than that of GA-crosslinked PP (GA-PP). The collaborative strategy of double crosslinking and sequential release of anticoagulant/endothelium-promoting drugs triggered by inflammation could effectively meet the requirement of enhanced multiple performance and long-term durability of bioprosthetic heart valves and provide a valuable pattern for multi-functionalization of blood contacting materials. STATEMENT OF SIGNIFICANCE: Currently, glutaraldehyde-crosslinked bioprosthetic heart valves (BHVs) are subject to subacute thrombus, inflammation, calcification and tearing, which would not guarantee good biocompatibility and long-term effective durability. We developed a cooperative strategy of double crosslinking and surface modification in which double-modified xanthan gum plays a cornerstone. The mechanical properties of this BHV were significantly improved via the first network formed by Schiff base bonds and the second C-C bonds network. Inflammation-triggered combination delivery of heparin and atorvastatin has been demonstrated to enhance anticoagulation, anti-inflammatory and pro-endothelialization of BHVs by utilizing local inflammatory response. The collaborative strategy could effectively meet the requirement of enhanced multiple performance and long-term durability of BHVs and provide a valuable pattern for the multi-functionalization of blood-contacting materials.

A functionalized biological heart valve by double bond crosslinking with enhanced biocompatibility and antithrombogenicity

With the advancement of minimally invasive interventional therapy, biological heart valves (BHVs) have been extensively used in clinics. However, BHVs are generally prone to degeneration within 10-15 years after implantation due to defects including cytotoxicity, immune response, calcification and thrombosis, which are closely related to glutaraldehyde-crosslinking. In this work, we prepared a functionalized BHV through the in situ polymerization of methacrylated porcine pericardium and 2-hydroxyethyl methacrylate to avoid and overcome the defects of glutaraldehyde-crosslinked BHVs. The functionalized BHV was proven to be stable against enzymatic degradation and compatible towards HUVECs. After implantation in rats subcutaneously, a significantly mitigated immune response and reduced calcification were observed in the functionalized BHV. With the grafting of hydrophilic 2-hydroxyethyl methacrylate polymers, the antithrombogenicity of BHV was markedly enhanced by resisting the unfavorable adhesion of blood components. Moreover, the hydrodynamics of the functionalized BHV totally conformed to ISO 5840-3 under a wide range of simulated physiological conditions. These results indicate that the functionalized BHV with enhanced biocompatibility, anticalcification property and antithrombogenicity exhibited a low risk of degeneration and should be explored for further application.

Dual-crosslinked bioprosthetic heart valves prepared by glutaraldehyde crosslinked pericardium and poly-2-hydroxyethyl methacrylate exhibited improved antithrombogenicity and anticalcification properties

Bioprosthetic heart valves (BHVs) have been widely used due to the revolutionary transcatheter aortic valve replacement (TAVR) techniques but suffer from a limited lifespan. Previous modification methods of BHVs mainly rely on glutaraldehyde precrosslinking and subsequent modification. In this study, we have engineered a Poly-2-Hydroxyethyl methacrylate (pHEMA) coated BHV based on co-crosslinking and co-polymerization strategies. Our BHV overcomes previous limitations of glutaraldehyde prefixation by introducing free molecules before crosslinking to achieve the crosslinking and allyl moiety immobilization simultaneously. Decellularized porcine pericardium and 2-Amino-4-pentenoic acid (APA) are firstly co-crosslinked by glutaraldehyde to obtain alkenylated porcine pericardium (APA-PP), then APA-PP is copolymerized with hydrophilic monomer 2-Hydroxyethyl methacrylate (HEMA) to prepare pHEMA grafted porcine pericardium (HEMA-PP). Compared with traditional glutaraldehyde crosslinked pericardium (GA), HEMA-PP exhibits decreased cytotoxicity and significantly increased endothelialial cells proliferation (7-folds higher than GA after 3-day incubation). In vitro and ex vivo hemocompatibility studies demonstrate the superiority of HEMA-PP in anti-thrombogenicity, where the platelet adhesion decreased by levels of approximately 89% compared to GA. Moreover, HEMA-PP maintains structurally stable with a low level of calcification in the subcutaneous model. The hydrodynamic performance and durability are proven to meet the requirements of ISO 5840-3. Altogether, HEMA-PP may have the potential for future clinical application. STATEMENT OF SIGNIFICANCE: Currently, bioprosthetic heart valves (BHVs) have drawbacks including cytotoxicity, calcification and thrombosis, which would accelerate structural valvular degeneration and limit the service life of BHVs. We developed a new modification strategy that could simultaneously improve the biocompatibility, anti-calcification and anti-thrombotic properties of BHVs. Moreover, the appropriate durability and hydrodynamic property demonstrated the potential of our strategy for clinical application. This work will potentially prolong the service life of BHVs and provide new insight for the modification of BHVs.

Collagen-based hydrogels cross-linked via laccase - mediated system incorporated with Fe3+ for wound dressing

Pure fish skin collagen hydrogels as a wound dressing have lower thermodynamic stability than mammalian collagen and usually suffer from poor mechanical properties, weak degradation resistance and insufficient functionalities such as antioxidant and anti-inflammatory properties to meet clinical needs that limit its further application. Here, a silver carp skin collagen hydrogel is successfully constructed via the cross-linking of the laccase-protocatechuic aldehyde (LAC-PAL) and the structure of the hydrogel is further consolidated and strengthened by the interaction of PAL and Fe3+. In this collagen hydrogel system, Fe3+, acting as a second cross-linker, consolidates and enhances the stability of the hydrogel after LAC-PAL cross-linking. This cross-linking method improves the resistance to degradation with a reduction in its degradation rate from 89.45% to 38.66% and endows the hydrogel with antioxidant activity. The in vitro data show that the hydrogel promotes cell proliferation and adhesion exhibiting good biocompatibility. Animal experiments show that the hydrogel contributes to angiogenesis and improves inflammatory response in the early stages of wound healing, resulting in promoting wound healing. Altogether, this newly developed collagen hydrogel is expected to be applied in wound repair as a wound dressing.

Development of Innovative Biomaterials and Devices for the Treatment of Cardiovascular Diseases

Cardiovascular diseases have become the leading cause of death worldwide. The increasing burden of cardiovascular diseases has become a major public health problem and how to carry out efficient and reliable treatment of cardiovascular diseases has become an urgent global problem to be solved. Recently, implantable biomaterials and devices, especially minimally invasive interventional ones, such as vascular stents, artificial heart valves, bioprosthetic cardiac occluders, artificial graft cardiac patches, atrial shunts, and injectable hydrogels against heart failure, have become the most effective means in the treatment of cardiovascular diseases. Herein, an overview of the challenges and research frontier of innovative biomaterials and devices for the treatment of cardiovascular diseases is provided, and their future development directions are discussed.

Hybrid heart valves with VEGF-loaded zwitterionic hydrogel coating for improved anti-calcification and re-endothelialization

With the aging of the population in worldwide, valvular heart disease has become one of the most prominent life-threatening diseases in human health, and heart valve replacement surgery is one of the therapeutic methods for valvular heart disease. Currently, commercial bioprosthetic heart valves (BHVs) for clinical application are prepared with xenograft heart valves or pericardium crosslinked by glutaraldehyde. Due to the residual cell toxicity from glutaraldehyde, heterologous antigens, and immune response, there are still some drawbacks related to the limited lifespan of bioprosthetic heart valves, such as thrombosis, calcification, degeneration, and defectiveness of re-endothelialization. Therefore, the problems of calcification, defectiveness of re-endothelialization, and poor biocompatibility from the use of bioprosthetic heart valve need to be solved. In this study, hydrogel hybrid heart valves with improved anti-calcification and re-endothelialization were prepared by taking decellularized porcine heart valves as scaffolds following grafting with double bonds. Then, the anti-biofouling zwitterionic monomers 2-methacryloyloxyethyl phosphorylcholine (MPC) and vascular endothelial growth factor (VEGF) were utilized to obtain a hydrogel-coated hybrid heart valve (PEGDA-MPC-DHVs@VEGF). The results showed that fewer platelets and thrombi were observed on the surface of the PEGDA-MPC-DHVs@VEGF. Additionally, the PEGDA-MPC-DHVs@VEGF exhibited excellent collagen stability, biocompatibility and re-endothelialization potential. Moreover, less calcification deposition and a lower immune response were observed in the PEGDA-MPC-DHVs@VEGF compared to the glutaraldehyde-crosslinked DHVs (Glu-DHVs) after subcutaneous implantation in rats for 30 days. These studies demonstrated that the strategy of zwitterionic hydrogels loaded with VEGF may be an effective approach to improving the biocompatibility, anti-calcification and re-endothelialization of bioprosthetic heart valves.

•

A new and promising strategy of overcoming defects of bioprosthetic heart valves.

•

The zwitterionic hydrogel with VEGF is utilized to improve anti-calcification and re-endothelialization properties of heart valves.

•

The hybrid heart valves with a VEGF-loaded zwitterionic hydrogel coating exhibits excellent biocompatibility.

The path to a hemocompatible cardiovascular implant: Advances and challenges of current endothelialization strategies

Cardiovascular (CV) implants are still associated with thrombogenicity due to insufficient hemocompatibility. Endothelialization of their luminal surface is a promising strategy to increase their hemocompatibility. In this review, we provide a collection of research studies and review articles aiming to summarize the recent efforts on surface modifications of CV implants, including stents, grafts, valves, and ventricular assist devises. We focus in particular on the implementation of micrometer or nanoscale surface modifications, physical characteristics of known biomaterials (such as wetness and stiffness), and surface morphological features (such as gratings, fibers, pores, and pits). We also review how biomechanical signals originating from the endothelial cell for surface interaction can be directed by topography engineering approaches toward the survival of the endothelium and its long-term adaptation. Finally, we summarize the regulatory and economic challenges that may prevent clinical implementation of endothelialized CV implants.

Hyaluronic Acid-Grafted Bioprosthetic Heart Valves Achieved by Copolymerization Exhibited Improved Anticalcification and Antithrombogenicity

Bioprosthetic heart valves (BHVs) are widely used in clinic, but they still have problems of calcification, thrombogenicity, and cytotoxicity. The reported techniques based on glutaraldehyde (Glut) crosslinking have difficulty in solving these problems simultaneously. In this study, we grafted Glut-crosslinked porcine pericardium (GA) with hyaluronic acid (HA) by radical copolymerization to improve its anticalcification and antithrombotic properties. Partially methacrylated poly-ε-lysine was used to introduce methacryl groups into GA. Then, HA-grafted porcine pericardium (GA-HA) was obtained by radical copolymerization. Rat's subcutaneous implantation results showed that the calcium content of GA-HA was significantly lower than that of GA (37 ± 29 μg/mg vs 188 ± 7 μg/mg), and the platelets adhering to the surface of GA-HA decreased by approximately 41% compared with GA. In conclusion, grafting porcine pericardium with HA by copolymerization might be feasible to improve the anticalcification and antithrombotic properties of BHVs.

A Comparative Study Between Porcine Peritoneum and Pericardium as Cardiovascular Material

Decellularized porcine pericardium has many applications in the cardiovascular field for its excellent properties. The peritoneum is a single-layer bio-dialysis membrane with many similarities and differences in physical characteristics, biochemical composition, and structure to the pericardium. The limited available literature suggests that, similar to the pericardium, the peritoneum has good application potential in the field of cardiovascular substitute materials. This research focused on comparing the differences between decellularized peritoneum and decellularized pericardium in microstructure, biochemical composition, mechanical properties, hemocompatibility, in vitro enzymatic degradation, in vitro calcification, cytocompatibility, and other vital indicators. The peritoneum was consistent with pericardium in terms of fibrous structure, hemocompatibility, in vitro calcification, and cytocompatibility. The peritoneal elastic fiber content (219 μg/mg) was significantly higher than that of the pericardium (66 μg/mg), resulting in two to three times higher maximum load (21.1 N) and burst pressure (1309 mmHg), and better performance than the pericardium in terms of in vitro resistance to enzymatic degradation. In the cardiovascular field, decellularized peritoneum can be used as vascular substitute material. Impact statement There are many similarities between the embryonic origin and morphological structure of the porcine peritoneum and the porcine pericardium, but little research has been done on the use of the porcine peritoneum as a biomaterial. In this compared research, we showed that porcine peritoneum had better resistance to enzymatic degradation, better stretching, and more suitable burst pressure for being used as vascular substitute material. This research is the first to describe the structural composition of porcine peritoneum and its advantageous properties as a cardiovascular material.